pragma solidity ^0.5.17;

library SafeMath {
    /**
    * @dev Multiplies two unsigned integers, reverts on overflow.
    */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
    * @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
    */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, "SafeMath: division by zero");
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
    * @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
    */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        uint256 c = a - b;

        return c;
    }

    /**
    * @dev Adds two unsigned integers, reverts on overflow.
    */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
    * @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
    * reverts when dividing by zero.
    */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "SafeMath: modulo by zero");
        return a % b;
    }
}

library Roles {
    struct Role {
        mapping (address => bool) bearer;
    }

    /**
     * @dev give an account access to this role
     */
    function add(Role storage role, address account) internal {
        require(account != address(0), "Roles: account is the zero address");
        require(!has(role, account), "Roles: account already has role");

        role.bearer[account] = true;
    }

    /**
     * @dev remove an account's access to this role
     */
    function remove(Role storage role, address account) internal {
        require(account != address(0), "Roles: account is the zero address");
        require(has(role, account), "Roles: account does not have role");

        role.bearer[account] = false;
    }

    /**
     * @dev check if an account has this role
     * @return bool
     */
    function has(Role storage role, address account) internal view returns (bool) {
        require(account != address(0), "Roles: account is the zero address");
        return role.bearer[account];
    }
}

contract Ownable {
    address public owner;
    address public newOwner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    constructor() public {
        owner = msg.sender;
        newOwner = address(0);
    }

    modifier onlyOwner() {
        require(msg.sender == owner, "Ownable: caller is not the owner");
        _;
    }
    modifier onlyNewOwner() {
        require(msg.sender != address(0), "Ownable: account is the zero address");
        require(msg.sender == newOwner, "Ownable: caller is not the new owner");
        _;
    }
   
    function isOwner(address account) public view returns (bool) {       
            return account == owner;
    }

    function transferOwnership(address _newOwner) public onlyOwner {
        require(_newOwner != address(0), "Ownable: new owner is the zero address");
        newOwner = _newOwner;
    }

    function acceptOwnership() public onlyNewOwner returns(bool) {
        emit OwnershipTransferred(owner, newOwner);        
        owner = newOwner;
        newOwner = address(0);
        return true;
    }
}

contract PauserRole is Ownable{
    using Roles for Roles.Role;

    event PauserAdded(address indexed account);
    event PauserRemoved(address indexed account);

    Roles.Role private _pausers;
    uint256 internal _pausersCount;

    constructor () internal {
        _addPauser(msg.sender);
    }

    modifier onlyPauser() {
        require(isPauser(msg.sender)|| isOwner(msg.sender));
        _;
    }

    function isPauser(address account) public view returns (bool) {
        return _pausers.has(account);
    }

    function addPauser(address account) public onlyPauser {
        _addPauser(account);
    }
   
    function removePauser(address account) public onlyOwner {
        _removePauser(account);
    }

    function renouncePauser() public onlyOwner {
        _removePauser(msg.sender);
    }

    function _addPauser(address account) internal {
        _pausers.add(account);
        emit PauserAdded(account);
    }

    function _removePauser(address account) internal {        
        _pausers.remove(account);
        emit PauserRemoved(account);
    }
}

contract Pausable is PauserRole {
    event Paused(address account);
    event Unpaused(address account);

    bool private _paused;

    constructor () internal {
        _paused = false;
    }

    /**
     * @return true if the contract is paused, false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!_paused, "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     */
    modifier whenPaused() {
        require(_paused, "Pausable: not paused");
        _;
    }

    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() public onlyPauser whenNotPaused {
        _paused = true;
        emit Paused(msg.sender);
    }

    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() public onlyPauser whenPaused {
        _paused = false;
        emit Unpaused(msg.sender);
    }
}

interface IERC20 {
    function transfer(address to, uint256 value) external returns (bool);

    function approve(address spender, uint256 value) external returns (bool);

    function transferFrom(address from, address to, uint256 value) external returns (bool);

    function totalSupply() external view returns (uint256);

    function balanceOf(address who) external view returns (uint256);

    function allowance(address owner, address spender) external view returns (uint256);

    event Transfer(address indexed from, address indexed to, uint256 value);

    event Approval(address indexed owner, address indexed spender, uint256 value);
}

contract ERC20 is IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) internal _balances;

    mapping (address => mapping (address => uint256)) internal _allowed;

    uint256 private _totalSupply;

    /**
    * @dev Total number of tokens in existence
    */
    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    /**
    * @dev Gets the balance of the specified address.
    * @param owner The address to query the balance of.
    * @return An uint256 representing the amount owned by the passed address.
    */
    function balanceOf(address owner) public view returns (uint256) {
        return _balances[owner];
    }

    /**
     * @dev Function to check the amount of tokens that an owner allowed to a spender.
     * @param owner address The address which owns the funds.
     * @param spender address The address which will spend the funds.
     * @return A uint256 specifying the amount of tokens still available for the spender.
     */
    function allowance(address owner, address spender) public view returns (uint256) {
        return _allowed[owner][spender];
    }

    /**
    * @dev Transfer token for a specified address
    * @param to The address to transfer to.
    * @param value The amount to be transferred.
    */
    function transfer(address to, uint256 value) public returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    /**
     * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
     * Beware that changing an allowance with this method brings the risk that someone may use both the old
     * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
     * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     */
    function approve(address spender, uint256 value) public returns (bool) {
        require(spender != address(0), "ERC20: approve from the zero address");

        _allowed[msg.sender][spender] = value;
        emit Approval(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev Transfer tokens from one address to another.
     * Note that while this function emits an Approval event, this is not required as per the specification,
     * and other compliant implementations may not emit the event.
     * @param from address The address which you want to send tokens from
     * @param to address The address which you want to transfer to
     * @param value uint256 the amount of tokens to be transferred
     */
    function transferFrom(address from, address to, uint256 value) public returns (bool) {
        _allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
        _transfer(from, to, value);
        emit Approval(from, msg.sender, _allowed[from][msg.sender]);
        return true;
    }

    /**
     * @dev Increase the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed_[_spender] == 0. To increment
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param addedValue The amount of tokens to increase the allowance by.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        require(spender != address(0), "ERC20: increaseAllowance from the zero address");

        _allowed[msg.sender][spender] = _allowed[msg.sender][spender].add(addedValue);
        emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
        return true;
    }

    /**
     * @dev Decrease the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed_[_spender] == 0. To decrement
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param subtractedValue The amount of tokens to decrease the allowance by.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        require(spender != address(0), "ERC20: decreaseAllowance from the zero address");

        _allowed[msg.sender][spender] = _allowed[msg.sender][spender].sub(subtractedValue);
        emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
        return true;
    }

    /**
    * @dev Transfer token for a specified addresses
    * @param from The address to transfer from.
    * @param to The address to transfer to.
    * @param value The amount to be transferred.
    */
    function _transfer(address from, address to, uint256 value) internal {
        require(to != address(0), "ERC20: account to the zero address");

        _balances[from] = _balances[from].sub(value);
        _balances[to] = _balances[to].add(value);
        emit Transfer(from, to, value);
    }

    /**
     * @dev Internal function that mints an amount of the token and assigns it to
     * an account. This encapsulates the modification of balances such that the
     * proper events are emitted.
     * @param account The account that will receive the created tokens.
     * @param value The amount that will be created.
     */
    function _mint(address account, uint256 value) internal {
        require(account != address(0), "ERC20: account from the zero address");

        _totalSupply = _totalSupply.add(value);
        _balances[account] = _balances[account].add(value);
        emit Transfer(address(0), account, value);
    }

    /**
     * @dev Internal function that burns an amount of the token of a given
     * account.
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burn(address account, uint256 value) internal {
        require(account != address(0), "ERC20: account from the zero address");

        _totalSupply = _totalSupply.sub(value);
        _balances[account] = _balances[account].sub(value);
        emit Transfer(account, address(0), value);
    }

    /**
     * @dev Internal function that burns an amount of the token of a given
     * account, deducting from the sender's allowance for said account. Uses the
     * internal burn function.
     * Emits an Approval event (reflecting the reduced allowance).
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burnFrom(address account, uint256 value) internal {
        _allowed[account][msg.sender] = _allowed[account][msg.sender].sub(value);
        _burn(account, value);
        emit Approval(account, msg.sender, _allowed[account][msg.sender]);
    }
}

contract ERC20Burnable is ERC20 {
    /**
     * @dev Burns a specific amount of tokens.
     * @param value The amount of token to be burned.
     */
    function burn(uint256 value) public {
        _burn(msg.sender, value);
    }

    /**
     * @dev Burns a specific amount of tokens from the target address and decrements allowance
     * @param from address The address which you want to send tokens from
     * @param value uint256 The amount of token to be burned
     */
    function burnFrom(address from, uint256 value) public {
        _burnFrom(from, value);
    }
}

contract ERC20Pausable is ERC20, Pausable {
    function transfer(address to, uint256 value) public whenNotPaused returns (bool) {
        return super.transfer(to, value);
    }

    function transferFrom(address from, address to, uint256 value) public whenNotPaused returns (bool) {
        return super.transferFrom(from, to, value);
    }

    function approve(address spender, uint256 value) public whenNotPaused returns (bool) {
        return super.approve(spender, value);
    }

    function increaseAllowance(address spender, uint addedValue) public whenNotPaused returns (bool success) {
        return super.increaseAllowance(spender, addedValue);
    }

    function decreaseAllowance(address spender, uint subtractedValue) public whenNotPaused returns (bool success) {
        return super.decreaseAllowance(spender, subtractedValue);
    }
}

contract ERC20Detailed is IERC20 {
    string private _name;
    string private _symbol;
    uint8 private _decimals;

    constructor (string memory name, string memory symbol, uint8 decimals) public {
        _name = name;
        _symbol = symbol;
        _decimals = decimals;
    }

    /**
     * @return the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @return the symbol of the token.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @return the number of decimals of the token.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }
}


contract AQT is ERC20Detailed, ERC20Pausable, ERC20Burnable {
   
    struct LockInfo {
        uint256 _releaseTime;
        uint256 _amount;
    }
   
    address public implementation;

    mapping (address => LockInfo[]) public timelockList;
    mapping (address => bool) public frozenAccount;
   
    event Freeze(address indexed holder,bool status);    
    event Lock(address indexed holder, uint256 value, uint256 releaseTime);
    event Unlock(address indexed holder, uint256 value);

    modifier notFrozen(address _holder) {
        require(!frozenAccount[_holder], "ERC20: frozenAccount");
        _;
    }
   
    constructor() ERC20Detailed("Alpha Quark Token", "AQT", 18) public  {
        _mint(msg.sender, 30000000 * (10 ** 18));
    }
   
    function balanceOf(address owner) public view returns (uint256) {
       
        uint256 totalBalance = super.balanceOf(owner);
        if( timelockList[owner].length >0 ){
            for(uint i=0; i<timelockList[owner].length;i++){
                totalBalance = totalBalance.add(timelockList[owner][i]._amount);
            }
        }
       
        return totalBalance;
    }
   
    function transfer(address to, uint256 value) public notFrozen(msg.sender) notFrozen(to) returns (bool) {
        if (timelockList[msg.sender].length > 0 ) {
            _autoUnlock(msg.sender);            
        }
        return super.transfer(to, value);
    }
   

    function freezeAccount(address holder, bool value) public onlyPauser returns (bool) {        
        frozenAccount[holder] = value;
        emit Freeze(holder,value);
        return true;
    }

    function lock(address holder, uint256 value, uint256 releaseTime) public onlyPauser returns (bool) {
        require(_balances[holder] >= value,"There is not enough balances of holder.");
        _lock(holder,value,releaseTime);
       
        return true;
    }
   
    function transferWithLock(address holder, uint256 value, uint256 releaseTime) public onlyPauser returns (bool) {
        _transfer(msg.sender, holder, value);
        _lock(holder,value,releaseTime);
        return true;
    }
   
    function unlock(address holder, uint256 idx) public onlyPauser returns (bool) {
        require( timelockList[holder].length > idx, "There is not lock info.");
        _unlock(holder,idx);
        return true;
    }
   
    /**
     * @dev Upgrades the implementation address
     * @param _newImplementation address of the new implementation
     */
    function upgradeTo(address _newImplementation) public onlyOwner {
        require(implementation != _newImplementation);
        _setImplementation(_newImplementation);
    }
   
    function _lock(address holder, uint256 value, uint256 releaseTime) internal returns(bool) {
        _balances[holder] = _balances[holder].sub(value);
        timelockList[holder].push( LockInfo(releaseTime, value) );
       
        emit Lock(holder, value, releaseTime);
        return true;
    }
   
    function _unlock(address holder, uint256 idx) internal returns(bool) {
        LockInfo storage lockinfo = timelockList[holder][idx];
        uint256 releaseAmount = lockinfo._amount;
        timelockList[holder][idx] = timelockList[holder][timelockList[holder].length.sub(1)];
        timelockList[holder].pop();
       
        emit Unlock(holder, releaseAmount);
        _balances[holder] = _balances[holder].add(releaseAmount);
       
        return true;
    }
   
    function _autoUnlock(address holder) internal returns(bool) {
        for(uint256 idx =0; idx < timelockList[holder].length ; idx++ ) {
            if (timelockList[holder][idx]._releaseTime <= now) {
                // If lockupinfo was deleted, loop restart at same position.
                if( _unlock(holder, idx) ) {
                    idx -=1;
                }
            }
        }
        return true;
    }
   
    /**
     * @dev Sets the address of the current implementation
     * @param _newImp address of the new implementation
     */
    function _setImplementation(address _newImp) internal {
        implementation = _newImp;
    }
   
    /**
     * @dev Fallback function allowing to perform a delegatecall
     * to the given implementation. This function will return
     * whatever the implementation call returns
     */
    function () payable external {
        address impl = implementation;
        require(impl != address(0), "ERC20: account is the zero address");
        assembly {
            let ptr := mload(0x40)
            calldatacopy(ptr, 0, calldatasize)
            let result := delegatecall(gas, impl, ptr, calldatasize, 0, 0)
            let size := returndatasize
            returndatacopy(ptr, 0, size)
           
            switch result
            case 0 { revert(ptr, size) }
            default { return(ptr, size) }
        }
    }
}

{
  "compilationTarget": {
    "AQT.sol": "AQT"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}