// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/utils/math/Math.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "./interfaces/IBaseGauge.sol";
abstract contract BaseGauge is IBaseGauge, OwnableUpgradeable {
IERC20 public immutable REWARD_TOKEN;
//// @notice rewards are distributed over `duration` seconds when queued.
uint256 public duration;
uint256 public periodFinish;
uint256 public rewardRate;
uint256 public lastUpdateTime;
uint256 public rewardPerTokenStored;
/**
@notice that are queued to be distributed on a `queueNewRewards` call
@dev rewards are queued when an account `_updateReward`.
*/
uint256 public queuedRewards;
uint256 public currentRewards;
uint256 public historicalRewards;
mapping(address => uint256) public userRewardPerTokenPaid;
mapping(address => uint256) public rewards;
event RewardsAdded(
uint256 currentRewards,
uint256 lastUpdateTime,
uint256 periodFinish,
uint256 rewardRate,
uint256 historicalRewards
);
event RewardsQueued(address indexed from, uint256 amount);
event RewardPaid(address indexed user, uint256 reward);
event UpdatedRewards(
address indexed account,
uint256 rewardPerTokenStored,
uint256 lastUpdateTime,
uint256 rewards,
uint256 userRewardPerTokenPaid
);
event Sweep(address indexed token, uint256 amount);
event DurationUpdated(
uint256 duration,
uint256 rewardRate,
uint256 periodFinish
);
function _newEarning(address) internal view virtual returns (uint256);
function _updateReward(address) internal virtual;
function _rewardPerToken() internal view virtual returns (uint256);
modifier updateReward(address account) {
_updateReward(account);
_;
}
constructor(address _rewardsToken) {
require(
address(_rewardsToken) != address(0x0),
"rewardsToken 0x0 address"
);
REWARD_TOKEN = IERC20(_rewardsToken);
}
function __initialize(address _owner) internal {
require(_owner != address(0), "_owner 0x0 address");
duration = 14 days;
_transferOwnership(_owner);
}
/**
@notice set the duration of the reward distribution.
@param _newDuration duration in seconds.
*/
function setDuration(
uint256 _newDuration
) external onlyOwner updateReward(address(0)) {
require(_newDuration != 0, "duration should be greater than zero");
if (block.timestamp < periodFinish) {
uint256 remaining = periodFinish - block.timestamp;
uint256 leftover = remaining * rewardRate;
rewardRate = leftover / _newDuration;
periodFinish = block.timestamp + _newDuration;
}
duration = _newDuration;
emit DurationUpdated(_newDuration, rewardRate, periodFinish);
}
/**
* @return timestamp until rewards are distributed
*/
function lastTimeRewardApplicable() public view returns (uint256) {
return Math.min(block.timestamp, periodFinish);
}
/** @notice reward per token deposited
* @dev gives the total amount of rewards distributed since the inception of the pool.
* @return rewardPerToken
*/
function rewardPerToken() external view returns (uint256) {
return _rewardPerToken();
}
function _protectedTokens(
address _token
) internal view virtual returns (bool) {
return _token == address(REWARD_TOKEN);
}
/** @notice sweep tokens that are airdropped/transferred into the gauge.
* @dev sweep can only be done on non-protected tokens.
* @return _token to sweep
*/
function sweep(address _token) external onlyOwner returns (bool) {
require(_protectedTokens(_token) == false, "protected token");
uint256 amount = IERC20(_token).balanceOf(address(this));
SafeERC20.safeTransfer(IERC20(_token), owner(), amount);
emit Sweep(_token, amount);
return true;
}
/** @notice earnings for an account
* @dev earnings are based on lock duration and boost
* @return amount of tokens earned
*/
function earned(address _account) external view virtual returns (uint256) {
return _newEarning(_account);
}
/**
* @notice
* Add new rewards to be distributed over a week
* @dev Trigger reward rate recalculation using `_amount` and queue rewards
* @param _amount token to add to rewards
* @return true
*/
function queueNewRewards(uint256 _amount) external override returns (bool) {
require(_amount != 0, "==0");
SafeERC20.safeTransferFrom(
IERC20(REWARD_TOKEN),
msg.sender,
address(this),
_amount
);
emit RewardsQueued(msg.sender, _amount);
_amount = _amount + queuedRewards;
if (block.timestamp >= periodFinish) {
_notifyRewardAmount(_amount);
queuedRewards = 0;
return true;
}
uint256 elapsedSinceBeginingOfPeriod = block.timestamp -
(periodFinish - duration);
uint256 distributedSoFar = elapsedSinceBeginingOfPeriod * rewardRate;
// we only restart a new period if _amount is 120% of distributedSoFar.
if ((distributedSoFar * 12) / 10 < _amount) {
_notifyRewardAmount(_amount);
queuedRewards = 0;
} else {
queuedRewards = _amount;
}
return true;
}
function _notifyRewardAmount(
uint256 _reward
) internal updateReward(address(0)) {
historicalRewards = historicalRewards + _reward;
if (block.timestamp >= periodFinish) {
rewardRate = _reward / duration;
} else {
uint256 remaining = periodFinish - block.timestamp;
uint256 leftover = remaining * rewardRate;
_reward = _reward + leftover;
rewardRate = _reward / duration;
}
currentRewards = _reward;
lastUpdateTime = block.timestamp;
periodFinish = block.timestamp + duration;
emit RewardsAdded(
currentRewards,
lastUpdateTime,
periodFinish,
rewardRate,
historicalRewards
);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal onlyInitializing {
}
function __Context_init_unchained() internal onlyInitializing {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20Upgradeable.sol";
import "./extensions/IERC20MetadataUpgradeable.sol";
import "../../utils/ContextUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable, IERC20MetadataUpgradeable {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
__ERC20_init_unchained(name_, symbol_);
}
function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[45] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
import "./interfaces/IExtraReward.sol";
import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/utils/math/Math.sol";
import "./interfaces/IGauge.sol";
import "./BaseGauge.sol";
import "./interfaces/IVotingYFI.sol";
import "./interfaces/IDYfiRewardPool.sol";
/** @title Gauge stake vault token get YFI rewards
@notice Deposit your vault token (one gauge per vault).
YFI are paid based on the number of vault tokens, the veYFI balance, and the duration of the lock.
@dev this contract is used behind multiple delegate proxies.
*/
contract Gauge is BaseGauge, ERC20Upgradeable, IGauge {
using SafeERC20 for IERC20;
struct Balance {
uint256 realBalance;
uint256 boostedBalance;
}
struct Approved {
bool claim;
bool lock;
}
uint256 public constant BOOSTING_FACTOR = 1;
uint256 public constant BOOST_DENOMINATOR = 10;
IERC20 public asset;
//// @notice veYFI
address public immutable VEYFI;
//// @notice the veYFI YFI reward pool, penalty are sent to this contract.
address public immutable VE_YFI_POOL;
//// @notice a copy of the veYFI max lock duration
uint256 public constant PRECISION_FACTOR = 10 ** 18;
//// @notice Penalty does not apply for locks expiring after 3y11m
mapping(address => uint256) private _boostedBalances;
mapping(address => address) public recipients;
event TransferredPenalty(address indexed account, uint256 transfered);
event BoostedBalanceUpdated(address account, uint256 amount);
event Initialize(address indexed asset, address indexed owner);
event RecipientUpdated(address indexed account, address indexed recipient);
constructor(
address _veYfi,
address _dYfi,
address _veYfiDYfiPool
) BaseGauge(_dYfi) {
require(_veYfi != address(0x0), "_asset 0x0 address");
require(_veYfiDYfiPool != address(0x0), "_asset 0x0 address");
VEYFI = _veYfi;
VE_YFI_POOL = _veYfiDYfiPool;
}
/** @notice initialize the contract
* @dev Initialize called after contract is cloned.
* @param _asset The vault token to stake
* @param _owner owner address
*/
function initialize(address _asset, address _owner) external initializer {
__initialize(_owner);
asset = IERC20(_asset);
__ERC20_init(
string.concat("yGauge ", IERC20Metadata(_asset).name()),
string.concat("yG-", IERC20Metadata(_asset).symbol())
);
emit Initialize(_asset, _owner);
}
/** @return total of the staked vault token
*/
function totalAssets() public view returns (uint256) {
return totalSupply();
}
/**
The amount of shares that the Vault would exchange for the amount of assets provided.
*/
function convertToShares(uint256 _assets) public view returns (uint256) {
return _assets;
}
/**
The amount of assets that the Vault would exchange for the amount of shares provided.
*/
function convertToAssets(uint256 _shares) public view returns (uint256) {
return _shares;
}
/**
Maximum amount of the underlying asset that can be deposited into the Vault for the receiver, through a deposit call.
*/
function maxDeposit(address) public view returns (uint256) {
return type(uint256).max;
}
/**
Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given current on-chain conditions.
*/
function previewDeposit(uint256 _assets) public view returns (uint256) {
return _assets;
}
/**
Maximum amount of shares that can be minted from the Vault for the receiver, through a mint call.
*/
function maxMint(address) public view returns (uint256) {
return type(uint256).max;
}
/**
Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given current on-chain conditions.
*/
function previewMint(uint256 _shares) public view returns (uint256) {
return _shares;
}
/** @param _account to look balance for
* @return amount of staked token for an account
*/
function boostedBalanceOf(
address _account
) external view returns (uint256) {
return _boostedBalances[_account];
}
/** @notice
* Performs a snapshot of the account's accrued rewards since the previous update.
* @dev
* The snapshot made by this function depends on:
* 1. The account's boosted balance
* 2. The amount of reward emissions that have been added to the gauge since the
* account's rewards were last updated.
* Any function that mutates an account's balance, boostedBalance, userRewardPerTokenPaid,
* or rewards MUST call updateReward before performing the mutation.
*/
function _updateReward(address _account) internal override {
rewardPerTokenStored = _rewardPerToken();
lastUpdateTime = lastTimeRewardApplicable();
if (_account != address(0)) {
if (_boostedBalances[_account] != 0) {
uint256 newEarning = _newEarning(_account);
uint256 maxEarning = _maxEarning(_account);
rewards[_account] += newEarning;
uint256 penalty = maxEarning - newEarning;
_transferVeYfiORewards(penalty);
emit TransferredPenalty(_account, penalty);
}
userRewardPerTokenPaid[_account] = rewardPerTokenStored;
emit UpdatedRewards(
_account,
rewardPerTokenStored,
lastUpdateTime,
rewards[_account],
userRewardPerTokenPaid[_account]
);
}
}
function _beforeTokenTransfer(
address _from,
address _to,
uint256
) internal override {
if (_from != address(0)) {
_updateReward(_from);
}
if (_to != address(0)) {
_updateReward(_to);
}
}
function _afterTokenTransfer(
address _from,
address _to,
uint256
) internal override {
if (_from != address(0)) {
_boostedBalances[_from] = _boostedBalanceOf(_from);
emit BoostedBalanceUpdated(_from, _boostedBalances[_from]);
}
if (_to != address(0)) {
_boostedBalances[_to] = _boostedBalanceOf(_to);
emit BoostedBalanceUpdated(_to, _boostedBalances[_to]);
}
}
function _rewardPerToken() internal view override returns (uint256) {
if (totalAssets() == 0) {
return rewardPerTokenStored;
}
return
rewardPerTokenStored +
(((lastTimeRewardApplicable() - lastUpdateTime) *
rewardRate *
PRECISION_FACTOR) / totalAssets());
}
/** @notice The total undistributed earnings for an account.
* @dev Earnings are based on lock duration and boost
* @return
* Amount of tokens the account has earned that have yet to be distributed.
*/
function earned(
address _account
) external view override(BaseGauge, IBaseGauge) returns (uint256) {
uint256 newEarning = _newEarning(_account);
return newEarning + rewards[_account];
}
/** @notice Calculates an account's earnings based on their boostedBalance.
* This function only reflects the accounts earnings since the last time
* the account's rewards were calculated via _updateReward.
*/
function _newEarning(
address _account
) internal view override returns (uint256) {
return
(_boostedBalances[_account] *
(_rewardPerToken() - userRewardPerTokenPaid[_account])) /
PRECISION_FACTOR;
}
/** @notice Calculates an account's potential maximum earnings based on
* a maximum boost.
* This function only reflects the accounts earnings since the last time
* the account's rewards were calculated via _updateReward.
*/
function _maxEarning(address _account) internal view returns (uint256) {
return
(balanceOf(_account) *
(_rewardPerToken() - userRewardPerTokenPaid[_account])) /
PRECISION_FACTOR;
}
/** @notice
* Calculates the boosted balance of based on veYFI balance.
* @dev
* This function expects this._totalAssets to be up to date.
* @return
* The account's boosted balance. Always lower than or equal to the
* account's real balance.
*/
function nextBoostedBalanceOf(
address _account
) external view returns (uint256) {
return _boostedBalanceOf(_account);
}
/** @notice
* Calculates the boosted balance of based on veYFI balance.
* @dev
* This function expects the account's _balances[_account].realBalance
* to be up to date.
* @dev This function expects this._totalAssets to be up to date.
* @return
* The account's boosted balance. Always lower than or equal to the
* account's real balance.
*/
function _boostedBalanceOf(
address _account
) internal view returns (uint256) {
return _boostedBalanceOf(_account, balanceOf(_account));
}
/** @notice
* Calculates the boosted balance of an account based on its gauge stake
* proportion & veYFI lock proportion.
* @dev This function expects this._totalAssets to be up to date.
* @param _account The account whose veYFI lock should be checked.
* @param _realBalance The amount of token _account has locked in the gauge.
* @return
* The account's boosted balance. Always lower than or equal to the
* account's real balance.
*/
function _boostedBalanceOf(
address _account,
uint256 _realBalance
) internal view returns (uint256) {
uint256 veTotalSupply = IVotingYFI(VEYFI).totalSupply();
if (veTotalSupply == 0) {
return _realBalance;
}
return
Math.min(
((_realBalance * BOOSTING_FACTOR) +
(((totalSupply() * IVotingYFI(VEYFI).balanceOf(_account)) /
veTotalSupply) *
(BOOST_DENOMINATOR - BOOSTING_FACTOR))) /
BOOST_DENOMINATOR,
_realBalance
);
}
/** @notice deposit vault tokens into the gauge
* @dev a user without a veYFI should not lock.
* @dev will deposit the min between user balance and user approval
* @dev This call updates claimable rewards
* @return amount of assets deposited
*/
function deposit() external returns (uint256) {
uint256 balance = Math.min(
asset.balanceOf(msg.sender),
asset.allowance(msg.sender, address(this))
);
_deposit(balance, msg.sender);
return balance;
}
/** @notice deposit vault tokens into the gauge
* @dev a user without a veYFI should not lock.
* @dev This call updates claimable rewards
* @param _assets of vault token
* @return amount of assets deposited
*/
function deposit(uint256 _assets) external returns (uint256) {
_deposit(_assets, msg.sender);
return _assets;
}
/** @notice deposit vault tokens into the gauge for a user
* @dev vault token is taken from msg.sender
* @dev This call update `_for` claimable rewards
* @param _assets to deposit
* @param _receiver the account to deposit to
* @return true
*/
function deposit(
uint256 _assets,
address _receiver
) external returns (uint256) {
_deposit(_assets, _receiver);
return _assets;
}
/** @notice deposit vault tokens into the gauge for a user
* @dev vault token is taken from msg.sender
* @dev This call update `_for` claimable rewards
* @dev shares and
* @param _shares to deposit
* @param _receiver the account to deposit to
* @return amount of shares transfered
*/
function mint(
uint256 _shares,
address _receiver
) external returns (uint256) {
_deposit(_shares, _receiver);
return _shares;
}
function _deposit(uint256 _assets, address _receiver) internal {
require(_assets != 0, "RewardPool : Cannot deposit 0");
//take away from sender
asset.safeTransferFrom(msg.sender, address(this), _assets);
// mint shares
_mint(_receiver, _assets);
emit Deposit(msg.sender, _receiver, _assets, _assets);
}
/**
Maximum amount of the underlying asset that can be withdrawn from the owner balance in the Vault, through a withdraw call.
*/
function maxWithdraw(address _owner) external view returns (uint256) {
return balanceOf(_owner);
}
function previewWithdraw(uint256 _assets) external view returns (uint256) {
return _assets;
}
/** @notice Burns shares from owner and sends exactly assets of underlying tokens to receiver.
* @dev This call updates claimable rewards
* @param _assets amount to withdraw
* @param _receiver account that will recieve the shares
* @param _owner shares will be taken from account
* @param _claim claim veYFI and additional reward
* @return amount of shares withdrawn
*/
function withdraw(
uint256 _assets,
address _receiver,
address _owner,
bool _claim
) external returns (uint256) {
return _withdraw(_assets, _receiver, _owner, _claim);
}
/** @notice Burns shares from owner and sends exactly assets of underlying tokens to receiver.
* @dev This call updates claimable rewards
* @param _assets amount to withdraw
* @param _receiver account that will recieve the shares
* @param _owner shares will be taken from account
* @return amount of shares withdrawn
*/
function withdraw(
uint256 _assets,
address _receiver,
address _owner
) external returns (uint256) {
return _withdraw(_assets, _receiver, _owner, false);
}
/** @notice withdraw all vault tokens from gauge
* @dev This call updates claimable rewards
* @param _claim claim veYFI and additional reward
* @return amount of shares withdrawn
*/
function withdraw(bool _claim) external returns (uint256) {
return _withdraw(balanceOf(msg.sender), msg.sender, msg.sender, _claim);
}
/** @notice withdraw all vault token from gauge
* @dev This call update claimable rewards
* @return amount of shares withdrawn
*/
function withdraw() external returns (uint256) {
return _withdraw(balanceOf(msg.sender), msg.sender, msg.sender, false);
}
function _withdraw(
uint256 _assets,
address _receiver,
address _owner,
bool _claim
) internal returns (uint256) {
require(_assets != 0, "RewardPool : Cannot withdraw 0");
if (msg.sender != _owner) {
_spendAllowance(_owner, msg.sender, _assets);
}
_burn(_owner, _assets);
if (_claim) {
_getReward(_owner);
}
asset.safeTransfer(_receiver, _assets);
emit Withdraw(msg.sender, _receiver, _owner, _assets, _assets);
return _assets;
}
function maxRedeem(address _owner) external view returns (uint256) {
return balanceOf(_owner);
}
function previewRedeem(uint256 _assets) external view returns (uint256) {
return _assets;
}
/** @notice Burns shares from owner and sends exactly assets of underlying tokens to receiver.
* @dev This call updates claimable rewards
* @param _assets amount to withdraw
* @param _receiver account that will recieve the shares
* @param _owner shares will be taken from account
* @return amount of shares withdrawn
*/
function redeem(
uint256 _assets,
address _receiver,
address _owner
) external override returns (uint256) {
return _withdraw(_assets, _receiver, _owner, true);
}
/**
* @notice
* Get rewards
* @return true
*/
function getReward() external updateReward(msg.sender) returns (bool) {
_getReward(msg.sender);
return true;
}
/**
* @notice
* Get rewards for an account
* @dev rewards are transferred to _account
* @param _account to claim rewards for
* @return true
*/
function getReward(
address _account
) external updateReward(_account) returns (bool) {
_getReward(_account);
return true;
}
/** @notice Distributes the rewards for the specified account.
* @dev
* This function MUST NOT be called without the caller invoking
* updateReward(_account) first.
*/
function _getReward(address _account) internal {
uint256 boostedBalance = _boostedBalanceOf(_account);
_boostedBalances[_account] = boostedBalance;
emit BoostedBalanceUpdated(_account, boostedBalance);
uint256 reward = rewards[_account];
if (reward != 0) {
rewards[_account] = 0;
address recipient = recipients[_account];
if (recipient != address(0x0)) {
REWARD_TOKEN.safeTransfer(recipient, reward);
} else {
REWARD_TOKEN.safeTransfer(_account, reward);
}
emit RewardPaid(_account, reward);
}
}
function _transferVeYfiORewards(uint256 _penalty) internal {
IERC20(REWARD_TOKEN).approve(VE_YFI_POOL, _penalty);
IDYfiRewardPool(VE_YFI_POOL).burn(_penalty);
}
function _protectedTokens(
address _token
) internal view override returns (bool) {
return _token == address(REWARD_TOKEN) || _token == address(asset);
}
/**
@notice Kick `addr` for abusing their boost
@param _accounts Addresses to kick
*/
function kick(address[] calldata _accounts) public {
for (uint256 i = 0; i < _accounts.length; ++i) {
_kick(_accounts[i]);
}
}
function _kick(address _account) internal updateReward(_account) {
uint256 balance = balanceOf(_account);
uint256 boostedBalance = _boostedBalanceOf(_account, balance);
_boostedBalances[_account] = boostedBalance;
emit BoostedBalanceUpdated(_account, boostedBalance);
}
/**
@notice Set the recipient of rewards for an account
@param _recipient Address to send rewards to
*/
function setRecipient(address _recipient) external {
recipients[msg.sender] = _recipient;
emit RecipientUpdated(msg.sender, _recipient);
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface IBaseGauge {
function queueNewRewards(uint256 _amount) external returns (bool);
function earned(address _account) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
interface IDYfiRewardPool {
function burn(uint256 _amount) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20Upgradeable.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20MetadataUpgradeable is IERC20Upgradeable {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20Upgradeable {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
import "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
/**
* @title EIP 4626 specification
* @notice Interface of EIP 4626 Interface
* as defined in https://eips.ethereum.org/EIPS/eip-4626
*/
interface IERC4626 is IERC20Upgradeable {
/**
* @notice Event indicating that `caller` exchanged `assets` for `shares`, and transferred those `shares` to `owner`
* @dev Emitted when tokens are deposited into the vault via {mint} and {deposit} methods
*/
event Deposit(
address indexed caller,
address indexed owner,
uint256 assets,
uint256 shares
);
/**
* @notice Event indicating that `caller` exchanged `shares`, owned by `owner`, for `assets`, and transferred those
* `assets` to `receiver`
* @dev Emitted when shares are withdrawn from the vault via {redeem} or {withdraw} methods
*/
event Withdraw(
address indexed caller,
address indexed receiver,
address indexed owner,
uint256 assets,
uint256 shares
);
/**
* @notice Returns the address of the underlying token used by the Vault
* @return assetTokenAddress The address of the underlying ERC20 Token
* @dev MUST be an ERC-20 token contract
*
* MUST not revert
*/
function asset() external view returns (IERC20 assetTokenAddress);
/**
* @notice Returns the total amount of the underlying asset managed by the Vault
* @return totalManagedAssets Amount of the underlying asset
* @dev Should include any compounding that occurs from yield.
*
* Should be inclusive of any fees that are charged against assets in the vault.
*
* Must not revert
*
*/
function totalAssets() external view returns (uint256 totalManagedAssets);
/**
*
* @notice Returns the amount of shares that, in an ideal scenario, the vault would exchange for the amount of assets
* provided
*
* @param _assets Amount of assets to convert
* @return shares Amount of shares that would be exchanged for the provided amount of assets
*
* @dev MUST NOT be inclusive of any fees that are charged against assets in the Vault.
*
* MUST NOT show any variations depending on the caller.
*
* MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
*
* MUST NOT revert unless due to integer overflow caused by an unreasonably large input.
*
* MUST round down towards 0.
*
* This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
* “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and from.
*/
function convertToShares(
uint256 _assets
) external view returns (uint256 shares);
/**
*
* @notice Returns the amount of assets that the vault would exchange for the amount of shares provided
*
* @param _shares Amount of vault shares to convert
* @return assets Amount of assets that would be exchanged for the provided amount of shares
*
* @dev MUST NOT be inclusive of any fees that are charged against assets in the Vault.
*
* MUST NOT show any variations depending on the caller.
*
* MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
*
* MUST NOT revert unless due to integer overflow caused by an unreasonably large input.
*
* MUST round down towards 0.
*
* This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
* “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and from.
*/
function convertToAssets(
uint256 _shares
) external view returns (uint256 assets);
/**
*
* @notice Returns the maximum amount of the underlying asset that can be deposited into the vault for the `receiver`
* through a {deposit} call
*
* @param _receiver Address whose maximum deposit is being queries
* @return maxAssets
*
* @dev MUST return the maximum amount of assets {deposit} would allow to be deposited for receiver and not cause a
* revert, which MUST NOT be higher than the actual maximum that would be accepted (it should underestimate if
*necessary). This assumes that the user has infinite assets, i.e. MUST NOT rely on {balanceOf} of asset.
*
* MUST factor in both global and user-specific limits, like if deposits are entirely disabled (even temporarily)
* it MUST return 0.
*
* MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
*
* MUST NOT revert.
*/
function maxDeposit(
address _receiver
) external view returns (uint256 maxAssets);
/**
* @notice Simulate the effects of a user's deposit at the current block, given current on-chain conditions
* @param _assets Amount of assets
* @return shares Amount of shares
* @dev MUST return as close to and no more than the exact amount of Vault shares that would be minted in a {deposit}
* call in the same transaction. I.e. deposit should return the same or more shares as {previewDeposit} if called in
* the same transaction. (I.e. {previewDeposit} should underestimate or round-down)
*
* MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
* deposit would be accepted, regardless if the user has enough tokens approved, etc.
*
* MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
*
* MUST NOT revert due to vault specific user/global limits. MAY revert due to other conditions that would also
* cause deposit to revert.
*
* Note that any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage
* in share price or some other type of condition, meaning the depositor will lose assets by depositing.
*/
function previewDeposit(
uint256 _assets
) external view returns (uint256 shares);
/**
* @notice Mints `shares` Vault shares to `receiver` by depositing exactly `amount` of underlying tokens
* @param _assets Amount of assets
* @param _receiver Address to deposit underlying tokens into
* @dev Must emit the {Deposit} event
*
* MUST support ERC-20 {approve} / {transferFrom} on asset as a deposit flow. MAY support an additional flow in
* which the underlying tokens are owned by the Vault contract before the {deposit} execution, and are accounted for
* during {deposit}.
*
* MUST revert if all of `assets` cannot be deposited (due to deposit limit being reached, slippage, the user not
* approving enough underlying tokens to the Vault contract, etc).
*
* Note that most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
*/
function deposit(
uint256 _assets,
address _receiver
) external returns (uint256 shares);
/**
* @notice Returns the maximum amount of shares that can be minted from the vault for the `receiver``, via a `mint`
* call
* @param _receiver Address to deposit minted shares into
* @return maxShares The maximum amount of shares
* @dev MUST return the maximum amount of shares mint would allow to be deposited to receiver and not cause a revert,
* which MUST NOT be higher than the actual maximum that would be accepted (it should underestimate if necessary).
* This assumes that the user has infinite assets, i.e. MUST NOT rely on balanceOf of asset.
*
* MUST factor in both global and user-specific limits, like if mints are entirely disabled (even temporarily) it
*
* MUST return 0.
*
* MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
*
* MUST NOT revert.
*/
function maxMint(
address _receiver
) external view returns (uint256 maxShares);
/**
* @notice Simulate the effects of a user's mint at the current block, given current on-chain conditions
* @param _shares Amount of shares to mint
* @return assets Amount of assets required to mint `mint` amount of shares
* @dev MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
* in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the same
* transaction. (I.e. {previewMint} should overestimate or round-up)
*
* MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
* would be accepted, regardless if the user has enough tokens approved, etc.
*
* MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
*
* MUST NOT revert due to vault specific user/global limits. MAY revert due to other conditions that would also
* cause mint to revert.
*
* Note that any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
* share price or some other type of condition, meaning the depositor will lose assets by minting.
*/
function previewMint(
uint256 _shares
) external view returns (uint256 assets);
/**
* @notice Mints exactly `shares` vault shares to `receiver` by depositing `amount` of underlying tokens
* @param _shares Amount of shares to mint
* @param _receiver Address to deposit minted shares into
* @return assets Amount of assets transferred to vault
* @dev Must emit the {Deposit} event
*
* MUST support ERC-20 {approve} / {transferFrom} on asset as a mint flow. MAY support an additional flow in
* which the underlying tokens are owned by the Vault contract before the mint execution, and are accounted for
* during mint.
*
* MUST revert if all of `shares` cannot be minted (due to deposit limit being reached, slippage, the user not
* approving enough underlying tokens to the Vault contract, etc).
*
* Note that most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
*/
function mint(
uint256 _shares,
address _receiver
) external returns (uint256 assets);
/**
* @notice Returns the maximum amount of the underlying asset that can be withdrawn from the `owner` balance in the
* vault, through a `withdraw` call.
* @param _owner Address of the owner whose max withdrawal amount is being queries
* @return maxAssets Maximum amount of underlying asset that can be withdrawn
* @dev MUST return the maximum amount of assets that could be transferred from `owner` through {withdraw} and not
* cause a revert, which MUST NOT be higher than the actual maximum that would be accepted (it should underestimate if
* necessary).
*
* MUST factor in both global and user-specific limits, like if withdrawals are entirely disabled
* (even temporarily) it MUST return 0.
*
* MUST NOT revert.
*/
function maxWithdraw(
address _owner
) external view returns (uint256 maxAssets);
/**
* @notice Simulate the effects of a user's withdrawal at the current block, given current on-chain conditions.
* @param _assets Amount of assets
* @return shares Amount of shares
* @dev MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a
* {withdraw} call in the same transaction. I.e. {withdraw} should return the same or fewer shares as
* {previewWithdraw} if called in the same transaction. (I.e. {previewWithdraw should overestimate or round-up})
*
* MUST NOT account for withdrawal limits like those returned from {maxWithdraw} and should always act as though
* the withdrawal would be accepted, regardless if the user has enough shares, etc.
*
* MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
*
* MUST NOT revert due to vault specific user/global limits. MAY revert due to other conditions that would also
* cause {withdraw} to revert.
*
* Note that any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
* share price or some other type of condition, meaning the depositor will lose assets by depositing.
*/
function previewWithdraw(
uint256 _assets
) external view returns (uint256 shares);
/**
* @notice Burns `shares` from `owner` and sends exactly `assets` of underlying tokens to `receiver`
* @param _assets Amount of underling assets to withdraw
* @return shares Amount of shares that will be burned
* @dev Must emit the {Withdraw} event
*
* MUST support a withdraw flow where the shares are burned from `owner` directly where `owner` is `msg.sender`
* or `msg.sender` has ERC-20 approval over the shares of `owner`. MAY support an additional flow in which the shares
* are transferred to the Vault contract before the withdraw execution, and are accounted for during withdraw.
*
* MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
* not having enough shares, etc).
*
* Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
* Those methods should be performed separately.
*/
function withdraw(
uint256 _assets,
address _receiver,
address _owner
) external returns (uint256 shares);
/**
* @notice Returns the maximum amount of vault shares that can be redeemed from the `owner` balance in the vault, via
* a `redeem` call.
* @param _owner Address of the owner whose shares are being queries
* @return maxShares Maximum amount of shares that can be redeemed
* @dev MUST return the maximum amount of shares that could be transferred from `owner` through `redeem` and not cause
* a revert, which MUST NOT be higher than the actual maximum that would be accepted (it should underestimate if
* necessary).
*
* MUST factor in both global and user-specific limits, like if redemption is entirely disabled
* (even temporarily) it MUST return 0.
*
* MUST NOT revert
*/
function maxRedeem(
address _owner
) external view returns (uint256 maxShares);
/**
* @notice Simulate the effects of a user's redemption at the current block, given current on-chain conditions
* @param _shares Amount of shares that are being simulated to be redeemed
* @return assets Amount of underlying assets that can be redeemed
* @dev MUST return as close to and no more than the exact amount of `assets `that would be withdrawn in a {redeem}
* call in the same transaction. I.e. {redeem} should return the same or more assets as {previewRedeem} if called in
* the same transaction. I.e. {previewRedeem} should underestimate/round-down
*
* MUST NOT account for redemption limits like those returned from {maxRedeem} and should always act as though
* the redemption would be accepted, regardless if the user has enough shares, etc.
*
* MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
*
* MUST NOT revert due to vault specific user/global limits. MAY revert due to other conditions that would also
* cause {redeem} to revert.
*
* Note that any unfavorable discrepancy between {convertToAssets} and {previewRedeem} SHOULD be considered
* slippage in share price or some other type of condition, meaning the depositor will lose assets by redeeming.
*/
function previewRedeem(
uint256 _shares
) external view returns (uint256 assets);
/**
* @notice Burns exactly `shares` from `owner` and sends `assets` of underlying tokens to `receiver`
* @param _shares Amount of shares to burn
* @param _receiver Address to deposit redeemed underlying tokens to
* @return assets Amount of underlying tokens redeemed
* @dev Must emit the {Withdraw} event
* MUST support a {redeem} flow where the shares are burned from owner directly where `owner` is `msg.sender` or
*
* `msg.sender` has ERC-20 approval over the shares of `owner`. MAY support an additional flow in which the shares
* are transferred to the Vault contract before the {redeem} execution, and are accounted for during {redeem}.
*
* MUST revert if all of {shares} cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
* not having enough shares, etc).
*
* Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
* Those methods should be performed separately.
*/
function redeem(
uint256 _shares,
address _receiver,
address _owner
) external returns (uint256 assets);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "./IBaseGauge.sol";
interface IExtraReward is IBaseGauge {
function initialize(
address _gauge,
address _reward,
address _owner
) external;
function rewardCheckpoint(address _account) external returns (bool);
function getReward() external returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
import "./IBaseGauge.sol";
import "./IERC4626.sol";
interface IGauge is IBaseGauge, IERC4626 {
function initialize(address _stakingToken, address _owner) external;
function boostedBalanceOf(address _account) external view returns (uint256);
function getReward(address _account) external returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface IVotingYFI is IERC20 {
struct LockedBalance {
int128 amount;
uint256 end;
}
function totalSupply() external view returns (uint256);
function locked(address _user) external view returns (LockedBalance memory);
function modify_lock(
uint256 _amount,
uint256 _unlock_time,
address _user
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.1) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/AddressUpgradeable.sol";
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
* reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
* case an upgrade adds a module that needs to be initialized.
*
* For example:
*
* [.hljs-theme-light.nopadding]
* ```
* contract MyToken is ERC20Upgradeable {
* function initialize() initializer public {
* __ERC20_init("MyToken", "MTK");
* }
* }
* contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
* function initializeV2() reinitializer(2) public {
* __ERC20Permit_init("MyToken");
* }
* }
* ```
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
* the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() {
* _disableInitializers();
* }
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
* @custom:oz-retyped-from bool
*/
uint8 private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Triggered when the contract has been initialized or reinitialized.
*/
event Initialized(uint8 version);
/**
* @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
* `onlyInitializing` functions can be used to initialize parent contracts.
*
* Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
* constructor.
*
* Emits an {Initialized} event.
*/
modifier initializer() {
bool isTopLevelCall = !_initializing;
require(
(isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
"Initializable: contract is already initialized"
);
_initialized = 1;
if (isTopLevelCall) {
_initializing = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
emit Initialized(1);
}
}
/**
* @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
* contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
* used to initialize parent contracts.
*
* A reinitializer may be used after the original initialization step. This is essential to configure modules that
* are added through upgrades and that require initialization.
*
* When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
* cannot be nested. If one is invoked in the context of another, execution will revert.
*
* Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
* a contract, executing them in the right order is up to the developer or operator.
*
* WARNING: setting the version to 255 will prevent any future reinitialization.
*
* Emits an {Initialized} event.
*/
modifier reinitializer(uint8 version) {
require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
_initialized = version;
_initializing = true;
_;
_initializing = false;
emit Initialized(version);
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} and {reinitializer} modifiers, directly or indirectly.
*/
modifier onlyInitializing() {
require(_initializing, "Initializable: contract is not initializing");
_;
}
/**
* @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
* Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
* to any version. It is recommended to use this to lock implementation contracts that are designed to be called
* through proxies.
*
* Emits an {Initialized} event the first time it is successfully executed.
*/
function _disableInitializers() internal virtual {
require(!_initializing, "Initializable: contract is initializing");
if (_initialized < type(uint8).max) {
_initialized = type(uint8).max;
emit Initialized(type(uint8).max);
}
}
/**
* @dev Returns the highest version that has been initialized. See {reinitializer}.
*/
function _getInitializedVersion() internal view returns (uint8) {
return _initialized;
}
/**
* @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
*/
function _isInitializing() internal view returns (bool) {
return _initializing;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10**64) {
value /= 10**64;
result += 64;
}
if (value >= 10**32) {
value /= 10**32;
result += 32;
}
if (value >= 10**16) {
value /= 10**16;
result += 16;
}
if (value >= 10**8) {
value /= 10**8;
result += 8;
}
if (value >= 10**4) {
value /= 10**4;
result += 4;
}
if (value >= 10**2) {
value /= 10**2;
result += 2;
}
if (value >= 10**1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal onlyInitializing {
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal onlyInitializing {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
{
"compilationTarget": {
"Gauge.sol": "Gauge"
},
"evmVersion": "london",
"libraries": {},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": true,
"runs": 200
},
"remappings": [
":@openzeppelin/contracts-upgradeable=.cache/openzeppelin-upgradeable/v4.8.1",
":@openzeppelin/contracts=.cache/openzeppelin/v4.8.1"
]
}
[{"inputs":[{"internalType":"address","name":"_veYfi","type":"address"},{"internalType":"address","name":"_dYfi","type":"address"},{"internalType":"address","name":"_veYfiDYfiPool","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"BoostedBalanceUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":false,"internalType":"uint256","name":"assets","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"duration","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"rewardRate","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"periodFinish","type":"uint256"}],"name":"DurationUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"asset","type":"address"},{"indexed":true,"internalType":"address","name":"owner","type":"address"}],"name":"Initialize","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"recipient","type":"address"}],"name":"RecipientUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"reward","type":"uint256"}],"name":"RewardPaid","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"currentRewards","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"lastUpdateTime","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"periodFinish","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"rewardRate","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"historicalRewards","type":"uint256"}],"name":"RewardsAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"RewardsQueued","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Sweep","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":false,"internalType":"uint256","name":"transfered","type":"uint256"}],"name":"TransferredPenalty","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":false,"internalType":"uint256","name":"rewardPerTokenStored","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"lastUpdateTime","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"rewards","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"userRewardPerTokenPaid","type":"uint256"}],"name":"UpdatedRewards","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":false,"internalType":"uint256","name":"assets","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[],"name":"BOOSTING_FACTOR","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"BOOST_DENOMINATOR","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PRECISION_FACTOR","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"REWARD_TOKEN","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"VEYFI","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"VE_YFI_POOL","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"asset","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_account","type":"address"}],"name":"boostedBalanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_shares","type":"uint256"}],"name":"convertToAssets","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_assets","type":"uint256"}],"name":"convertToShares","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"currentRewards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_assets","type":"uint256"},{"internalType":"address","name":"_receiver","type":"address"}],"name":"deposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_assets","type":"uint256"}],"name":"deposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"deposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"duration","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_account","type":"address"}],"name":"earned","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getReward","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_account","type":"address"}],"name":"getReward","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"historicalRewards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_asset","type":"address"},{"internalType":"address","name":"_owner","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"_accounts","type":"address[]"}],"name":"kick","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"lastTimeRewardApplicable","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lastUpdateTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"maxDeposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"maxMint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"name":"maxRedeem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"name":"maxWithdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_shares","type":"uint256"},{"internalType":"address","name":"_receiver","type":"address"}],"name":"mint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_account","type":"address"}],"name":"nextBoostedBalanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"periodFinish","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_assets","type":"uint256"}],"name":"previewDeposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_shares","type":"uint256"}],"name":"previewMint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_assets","type":"uint256"}],"name":"previewRedeem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_assets","type":"uint256"}],"name":"previewWithdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"queueNewRewards","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"queuedRewards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"recipients","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_assets","type":"uint256"},{"internalType":"address","name":"_receiver","type":"address"},{"internalType":"address","name":"_owner","type":"address"}],"name":"redeem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rewardPerToken","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rewardPerTokenStored","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rewardRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"rewards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_newDuration","type":"uint256"}],"name":"setDuration","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_recipient","type":"address"}],"name":"setRecipient","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_token","type":"address"}],"name":"sweep","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAssets","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"userRewardPerTokenPaid","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"withdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_claim","type":"bool"}],"name":"withdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_assets","type":"uint256"},{"internalType":"address","name":"_receiver","type":"address"},{"internalType":"address","name":"_owner","type":"address"}],"name":"withdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_assets","type":"uint256"},{"internalType":"address","name":"_receiver","type":"address"},{"internalType":"address","name":"_owner","type":"address"},{"internalType":"bool","name":"_claim","type":"bool"}],"name":"withdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"}]