PearlDAO

// SPDX-License-Identifier: MIT

pragma solidity 0.8.11;


// 
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, 'SafeMath: addition overflow');

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, 'SafeMath: subtraction overflow');
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, 'SafeMath: multiplication overflow');

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, 'SafeMath: division by zero');
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, 'SafeMath: modulo by zero');
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }

    function min(uint256 x, uint256 y) internal pure returns (uint256 z) {
        z = x < y ? x : y;
    }

    // babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
    function sqrt(uint256 y) internal pure returns (uint256 z) {
        if (y > 3) {
            z = y;
            uint256 x = y / 2 + 1;
            while (x < z) {
                z = x;
                x = (y / x + x) / 2;
            }
        } else if (y != 0) {
            z = 1;
        }
    }
}

// 
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the token decimals.
     */
    function decimals() external view returns (uint8);

    /**
     * @dev Returns the token symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the token name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the bep token owner.
     */
    function getOwner() external view returns (address);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address _owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// 
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            codehash := extcodehash(account)
        }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, 'Address: insufficient balance');

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{value: amount}('');
        require(success, 'Address: unable to send value, recipient may have reverted');
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, 'Address: low-level call failed');
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, 'Address: low-level call with value failed');
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, 'Address: insufficient balance for call');
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(
        address target,
        bytes memory data,
        uint256 weiValue,
        string memory errorMessage
    ) private returns (bytes memory) {
        require(isContract(target), 'Address: call to non-contract');

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{value: weiValue}(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// 
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
contract Context {
    // Empty internal constructor, to prevent people from mistakenly deploying
    // an instance of this contract, which should be used via inheritance.
    constructor() {}

    function _msgSender() internal view returns (address payable) {
        return payable(msg.sender);
    }

    function _msgData() internal view returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// 
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), 'Ownable: caller is not the owner');
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() external onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public onlyOwner {
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     */
    function _transferOwnership(address newOwner) internal {
        require(newOwner != address(0), 'Ownable: new owner is the zero address');
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// 
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_createInitialSupply}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-ERC20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, Ownable {
    using SafeMath for uint256;
    using Address for address;

    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the bep token owner.
     */
    function getOwner() external override view returns (address) {
        return owner();
    }

    /**
     * @dev Returns the token name.
     */
    function name() public override view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the token decimals.
     */
    function decimals() public override view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev Returns the token symbol.
     */
    function symbol() public override view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {ERC20-totalSupply}.
     */
    function totalSupply() public override view returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {ERC20-balanceOf}.
     */
    function balanceOf(address account) public override view returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {ERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {ERC20-allowance}.
     */
    function allowance(address owner, address spender) public override view returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {ERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {ERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for `sender`'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            _msgSender(),
            _allowances[sender][_msgSender()].sub(amount, 'ERC20: transfer amount exceeds allowance')
        );
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {ERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {ERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].sub(subtractedValue, 'ERC20: decreased allowance below zero')
        );
        return true;
    }

    /**
     * @dev Creates `amount` tokens and assigns them to `msg.sender`, increasing
     * the total supply.
     *
     * Requirements
     *
     * - `msg.sender` must be the token owner
     */
    function mint(uint256 amount) public onlyOwner returns (bool) {
        _createInitialSupply(_msgSender(), amount);
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), 'ERC20: transfer from the zero address');
        require(recipient != address(0), 'ERC20: transfer to the zero address');

        _balances[sender] = _balances[sender].sub(amount, 'ERC20: transfer amount exceeds balance');
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _createInitialSupply(address account, uint256 amount) internal {
        require(account != address(0), 'ERC20: mint to the zero address');

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal {
        require(account != address(0), 'ERC20: burn from the zero address');

        _balances[account] = _balances[account].sub(amount, 'ERC20: burn amount exceeds balance');
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal {
        require(owner != address(0), 'ERC20: approve from the zero address');
        require(spender != address(0), 'ERC20: approve to the zero address');

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`.`amount` is then deducted
     * from the caller's allowance.
     *
     * See {_burn} and {_approve}.
     */
    function _burnFrom(address account, uint256 amount) internal {
        _burn(account, amount);
        _approve(
            account,
            _msgSender(),
            _allowances[account][_msgSender()].sub(amount, 'ERC20: burn amount exceeds allowance')
        );
    }
}

interface IDexRouter {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);
    
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;

    function addLiquidityETH(
        address token,
        uint256 amountTokenDesired,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    )
        external
        payable
        returns (
            uint256 amountToken,
            uint256 amountETH,
            uint256 liquidity
        );
}

interface IDexFactory {
    function createPair(address tokenA, address tokenB)
        external
        returns (address pair);
}

contract PearlDAO is ERC20('PearlDAO', 'PEARLDAO') {

    IDexRouter public immutable dexRouter;
    address public immutable lpPair;

    uint256 public maxBuyAmount;
    uint256 public maxSellAmount;

    address public operationsAddress;
    address public charityAddress;

    bool private swapping;
    uint256 public swapTokensAtAmount;

    bool public limitsInEffect = true;
    bool public tradingActive = false;
    bool public swapEnabled = false;
    
    uint256 public tradingActiveBlock = 0; // 0 means trading is not active
    uint256 public earlyBuyPenaltyEnd; // determines when snipers/bots can sell without extra penalty
    
     // Anti-bot and anti-whale mappings and variables
    mapping(address => uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch
    bool public transferDelayEnabled = true;

    uint256 public buyTotalFees;
    uint256 public buyOperationsFee;
    uint256 public buyLiquidityFee;
    uint256 public buyCharityFee;

    uint256 public sellTotalFees;
    uint256 public sellOperationsFee;
    uint256 public sellLiquidityFee;
    uint256 public sellCharityFee;

    uint256 public tokensForOperations;
    uint256 public tokensForLiquidity;
    uint256 public tokensForCharity;
    
    /******************/

    // exlcude from fees and max transaction amount
    mapping (address => bool) public _isExcludedFromFees;
    mapping (address => bool) public _isExcludedMaxTransactionAmount;

    // store addresses that a automatic market maker pairs. Any transfer *to* these addresses
    // could be subject to a maximum transfer amount
    mapping (address => bool) public automatedMarketMakerPairs;

    event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);

    event EnabledTrading();

    event ExcludeFromFees(address indexed account, bool isExcluded);

    event UpdatedMaxBuyAmount(uint256 newAmount);

    event UpdatedMaxSellAmount(uint256 newAmount);

    event UpdatedOperationsAddress(address indexed newWallet);

    event UpdatedCharityAddress(address indexed newWallet);

    event MaxTransactionExclusion(address _address, bool excluded);

    event SwapAndLiquify(
        uint256 tokensSwapped,
        uint256 ethReceived,
        uint256 tokensIntoLiquidity
    );

    event TransferForeignToken(address token, uint256 amount);

    event OwnerForcedSwapBack(uint256 timestamp);

    constructor() {
        
        address newOwner = msg.sender; // can leave alone if owner is deployer.
        
        IDexRouter _dexRouter = IDexRouter(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);

        _excludeFromMaxTransaction(address(_dexRouter), true);
        dexRouter = _dexRouter;
        
        lpPair = IDexFactory(_dexRouter.factory()).createPair(address(this), _dexRouter.WETH());
        _setAutomatedMarketMakerPair(address(lpPair), true);
 
        uint256 totalSupply = 10* 1e12 * 1e18;
        
        maxBuyAmount = totalSupply * 1 / 1000;
        maxSellAmount = totalSupply * 1 / 1000; 
        swapTokensAtAmount = totalSupply * 1 / 10000; // 0.01% swap amount

        buyOperationsFee = 5;
        buyLiquidityFee = 5;
        buyCharityFee = 0;
        buyTotalFees = buyOperationsFee + buyLiquidityFee + buyCharityFee;

        sellOperationsFee = 7;
        sellLiquidityFee = 7;
        sellCharityFee = 0;
        sellTotalFees = sellOperationsFee + sellLiquidityFee + sellCharityFee;

        _excludeFromMaxTransaction(newOwner, true);
        _excludeFromMaxTransaction(address(this), true);
        _excludeFromMaxTransaction(address(0xdead), true);

        excludeFromFees(newOwner, true);
        excludeFromFees(address(this), true);
        excludeFromFees(address(0xdead), true);

        operationsAddress = address(0x5bFf5d0a17d48dCb3EeCa101eE758cBe5dB68A44);
        charityAddress = address(0x5bFf5d0a17d48dCb3EeCa101eE758cBe5dB68A44);
        
        _createInitialSupply(newOwner, totalSupply);
        transferOwnership(newOwner);
    }

    receive() external payable {
  	}

    // once enabled, can never be turned off
    function enableTrading() external onlyOwner {
        require(!tradingActive, "Cannot reenable trading");
        tradingActive = true;
        swapEnabled = true;
        tradingActiveBlock = block.number;
        emit EnabledTrading();
    }
    
    // remove limits after token is stable
    function removeLimits() external onlyOwner {
        limitsInEffect = false;
        transferDelayEnabled = false;
    }
    
    // disable Transfer delay - cannot be reenabled
    function disableTransferDelay() external onlyOwner {
        transferDelayEnabled = false;
    }
    
    function updateMaxBuyAmount(uint256 newNum) external onlyOwner {
        require(newNum >= (totalSupply() * 1 / 1000)/1e18, "Cannot set max buy amount lower than 0.1%");
        maxBuyAmount = newNum * (10**18);
        emit UpdatedMaxBuyAmount(maxBuyAmount);
    }
    
    function updateMaxSellAmount(uint256 newNum) external onlyOwner {
        require(newNum >= (totalSupply() * 1 / 1000)/1e18, "Cannot set max sell amount lower than 0.1%");
        maxSellAmount = newNum * (10**18);
        emit UpdatedMaxSellAmount(maxSellAmount);
    }

    // change the minimum amount of tokens to sell from fees
    function updateSwapTokensAtAmount(uint256 newAmount) external onlyOwner {
  	    require(newAmount*1e18 >= totalSupply() * 1 / 100000, "Swap amount cannot be lower than 0.001% total supply.");
  	    require(newAmount*1e18 <= totalSupply() * 1 / 1000, "Swap amount cannot be higher than 0.1% total supply.");
  	    swapTokensAtAmount = newAmount*1e18;
  	}
    
    function _excludeFromMaxTransaction(address updAds, bool isExcluded) private {
        _isExcludedMaxTransactionAmount[updAds] = isExcluded;
        emit MaxTransactionExclusion(updAds, isExcluded);
    }

    function airdropToWallets(address[] memory airdropWallets, uint256[] memory amounts) external onlyOwner returns (bool){
        require(airdropWallets.length == amounts.length, "arrays must be the same length");
        require(airdropWallets.length < 200, "Can only airdrop 200 wallets per txn due to gas limits"); // allows for airdrop + launch at the same exact time, reducing delays and reducing sniper input.
        for(uint256 i = 0; i < airdropWallets.length; i++){
            address wallet = airdropWallets[i];
            uint256 amount = amounts[i];
            super._transfer(msg.sender, wallet, amount);
        }
        return true;
    }
    
    function excludeFromMaxTransaction(address updAds, bool isEx) external onlyOwner {
        if(!isEx){
            require(updAds != lpPair, "Cannot remove uniswap pair from max txn");
        }
        _isExcludedMaxTransactionAmount[updAds] = isEx;
    }

    function setAutomatedMarketMakerPair(address pair, bool value) external onlyOwner {
        require(pair != lpPair, "The pair cannot be removed from automatedMarketMakerPairs");

        _setAutomatedMarketMakerPair(pair, value);
    }

    function _setAutomatedMarketMakerPair(address pair, bool value) private {
        automatedMarketMakerPairs[pair] = value;
        
        _excludeFromMaxTransaction(pair, value);

        emit SetAutomatedMarketMakerPair(pair, value);
    }

    function updateBuyFees(uint256 _operationsFee, uint256 _liquidityFee, uint256 _charityFee) external onlyOwner {
        buyOperationsFee = _operationsFee;
        buyLiquidityFee = _liquidityFee;
        buyCharityFee = _charityFee;
        buyTotalFees = buyOperationsFee + buyLiquidityFee + buyCharityFee;
        require(buyTotalFees <= 10, "Must keep fees at 10% or less");
    }

    function updateSellFees(uint256 _operationsFee, uint256 _liquidityFee, uint256 _charityFee) external onlyOwner {
        sellOperationsFee = _operationsFee;
        sellLiquidityFee = _liquidityFee;
        sellCharityFee = _charityFee;
        sellTotalFees = sellOperationsFee + sellLiquidityFee + sellCharityFee;
        require(sellTotalFees <= 20, "Must keep fees at 20% or less");
    }

    function excludeFromFees(address account, bool excluded) public onlyOwner {
        _isExcludedFromFees[account] = excluded;
        emit ExcludeFromFees(account, excluded);
    }

    function _transfer(address from, address to, uint256 amount) internal override {

        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        if(amount == 0){
            super._transfer(from, to, 0);
            return;
        }

        if(!tradingActive){
            require(_isExcludedFromFees[from] || _isExcludedFromFees[to], "Trading is not active.");
        }
        
        if(limitsInEffect){
            if (from != owner() && to != owner() && to != address(0) && to != address(0xdead)){
                
                // at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.  
                if (transferDelayEnabled){
                    if (to != address(dexRouter) && to != address(lpPair)){
                        require(_holderLastTransferTimestamp[tx.origin] < block.number, "_transfer:: Transfer Delay enabled.  Only one purchase per block allowed.");
                        _holderLastTransferTimestamp[tx.origin] = block.number;
                    }
                }
                 
                //when buy
                if (automatedMarketMakerPairs[from] && !_isExcludedMaxTransactionAmount[to]) {
                        require(amount <= maxBuyAmount, "Buy transfer amount exceeds the max buy.");
                } 
                //when sell
                else if (automatedMarketMakerPairs[to] && !_isExcludedMaxTransactionAmount[from]) {
                        require(amount <= maxSellAmount, "Sell transfer amount exceeds the max sell.");
                }
            }
        }

        uint256 contractTokenBalance = balanceOf(address(this));
        
        bool canSwap = contractTokenBalance >= swapTokensAtAmount;

        if(canSwap && swapEnabled && !swapping && !automatedMarketMakerPairs[from] && !_isExcludedFromFees[from] && !_isExcludedFromFees[to]) {
            swapping = true;

            swapBack();

            swapping = false;
        }

        bool takeFee = true;
        // if any account belongs to _isExcludedFromFee account then remove the fee
        if(_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
            takeFee = false;
        }
        
        uint256 fees = 0;
        // only take fees on buys/sells, do not take on wallet transfers
        if(takeFee){
            // on sell
            if (automatedMarketMakerPairs[to] && sellTotalFees > 0){
                fees = amount * sellTotalFees / 100;
                tokensForLiquidity += fees * sellLiquidityFee / sellTotalFees;
                tokensForOperations += fees * sellOperationsFee / sellTotalFees;
                tokensForCharity += fees * sellCharityFee / sellTotalFees;
            }
            // on buy
            else if(automatedMarketMakerPairs[from] && buyTotalFees > 0) {
        	    fees = amount * buyTotalFees / 100;
        	    tokensForLiquidity += fees * buyLiquidityFee / buyTotalFees;
                tokensForOperations += fees * buyOperationsFee / buyTotalFees;
                tokensForCharity += fees * buyCharityFee / buyTotalFees;
            }
            
            if(fees > 0){    
                super._transfer(from, address(this), fees);
            }
        	
        	amount -= fees;
        }

        super._transfer(from, to, amount);
    }

    function swapTokensForEth(uint256 tokenAmount) private {

        // generate the uniswap pair path of token -> weth
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = dexRouter.WETH();

        _approve(address(this), address(dexRouter), tokenAmount);

        // make the swap
        dexRouter.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0, // accept any amount of ETH
            path,
            address(this),
            block.timestamp
        );
    }
    
    function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
        // approve token transfer to cover all possible scenarios
        _approve(address(this), address(dexRouter), tokenAmount);

        // add the liquidity
        dexRouter.addLiquidityETH{value: ethAmount}(
            address(this),
            tokenAmount,
            0, // slippage is unavoidable
            0, // slippage is unavoidable
            address(0xdead),
            block.timestamp
        );
    }

    function swapBack() private {
        uint256 contractBalance = balanceOf(address(this));
        uint256 totalTokensToSwap = tokensForLiquidity + tokensForOperations + tokensForCharity;
        
        if(contractBalance == 0 || totalTokensToSwap == 0) {return;}

        if(contractBalance > swapTokensAtAmount * 5){
            contractBalance = swapTokensAtAmount * 5;
        }

        bool success;
        
        // Halve the amount of liquidity tokens
        uint256 liquidityTokens = contractBalance * tokensForLiquidity / totalTokensToSwap / 2;
        
        swapTokensForEth(contractBalance - liquidityTokens);
        
        uint256 ethBalance = address(this).balance;
        uint256 ethForLiquidity = ethBalance;

        uint256 ethForOperations = ethBalance * tokensForOperations / (totalTokensToSwap - (tokensForLiquidity/2));
        uint256 ethForCharity = ethBalance * tokensForCharity / (totalTokensToSwap - (tokensForLiquidity/2));

        ethForLiquidity -= ethForOperations + ethForCharity;
            
        tokensForLiquidity = 0;
        tokensForOperations = 0;
        tokensForCharity = 0;
        
        if(liquidityTokens > 0 && ethForLiquidity > 0){
            addLiquidity(liquidityTokens, ethForLiquidity);
        }
        
        (success,) = address(charityAddress).call{value: ethForCharity}("");
        (success,) = address(operationsAddress).call{value: address(this).balance}("");
    }

    // force Swap back if slippage above 49% for launch.
    function forceSwapBack() external onlyOwner {
        require(balanceOf(address(this)) >= swapTokensAtAmount, "Can only swap when token amount is at or higher than restriction");
        swapping = true;
        swapBack();
        swapping = false;
        emit OwnerForcedSwapBack(block.timestamp);
    }

    function transferForeignToken(address _token, address _to) external onlyOwner returns (bool _sent) {
        require(_token != address(0), "_token address cannot be 0");
        require(_token != address(this), "Can't withdraw native tokens");
        uint256 _contractBalance = IERC20(_token).balanceOf(address(this));
        _sent = IERC20(_token).transfer(_to, _contractBalance);
        emit TransferForeignToken(_token, _contractBalance);
    }

    // withdraw ETH if stuck or someone sends to the address
    function withdrawStuckETH() external onlyOwner {
        bool success;
        (success,) = address(msg.sender).call{value: address(this).balance}("");
    }

    function setOperationsAddress(address _operationsAddress) external onlyOwner {
        require(_operationsAddress != address(0), "_operationsAddress address cannot be 0");
        _isExcludedFromFees[operationsAddress] = false;
        operationsAddress = payable(_operationsAddress);
        _isExcludedFromFees[operationsAddress] = true;
        emit UpdatedOperationsAddress(_operationsAddress);
    }

    function setCharityAddress(address _charityAddress) external onlyOwner {
        require(_charityAddress != address(0), "_operationsAddress address cannot be 0");
        charityAddress = payable(_charityAddress);
        emit UpdatedCharityAddress(_charityAddress);
    }
}

{
  "compilationTarget": {
    "PearlDAO.sol": "PearlDAO"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}