infinityprotocol.io

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

pragma solidity 0.7.4;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

import "./IERC20.sol";

interface IInfinityProtocol is IERC20 {
    function burn(uint amount) external returns (bool);
}

pragma solidity 0.7.4;

import "@openzeppelin/contracts/GSN/Context.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "./IInfinityProtocol.sol";

contract InfinityProtocol is IInfinityProtocol, Context, Ownable {

    using SafeMath for uint;
    using Address for address;

    mapping (address => uint) private _rOwned;
    mapping (address => uint) private _tOwned;
    mapping (address => mapping (address => uint)) private _allowances;

    mapping (address => bool) private _isExcluded;
    address[] private _excluded;
    address public feeReceiver;
    address public router;
    uint public maxCycles;

    string  private constant _NAME = "infinityprotocol.io";
    string  private constant _SYMBOL = "INFINITY";
    uint8   private constant _DECIMALS = 8;

    uint private constant _MAX = ~uint(0);
    uint private constant _DECIMALFACTOR = 10 ** uint(_DECIMALS);
    uint private constant _GRANULARITY = 100;

    uint private _tTotal = 100000000 * _DECIMALFACTOR;
    uint private _rTotal = (_MAX - (_MAX % _tTotal));

    uint private _tFeeTotal;
    uint private _tBurnTotal;
    uint private _infinityCycle;

    uint private _tTradeCycle;
    uint private _tBurnCycle;

    uint private _BURN_FEE;
    uint private _FOT_FEE;
    bool private _feeSet;

    uint private constant _MAX_TX_SIZE = 100000000 * _DECIMALFACTOR;

    constructor (address _router) public {
        _rOwned[_msgSender()] = _rTotal;
        router = _router;
        setMaxCycles(500);
        emit Transfer(address(0), _msgSender(), _tTotal);
    }

    function name() public pure returns (string memory) {
        return _NAME;
    }

    function symbol() public pure returns (string memory) {
        return _SYMBOL;
    }

    function decimals() public pure returns (uint8) {
        return _DECIMALS;
    }

    function totalSupply() public view override returns (uint) {
        return _tTotal;
    }

    function balanceOf(address account) public view override returns (uint) {
        if (_isExcluded[account]) return _tOwned[account];
        return tokenFromReflection(_rOwned[account]);
    }

    function transfer(address recipient, uint amount) public override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    function allowance(address owner, address spender) public view override returns (uint) {
        return _allowances[owner][spender];
    }

    function approve(address spender, uint amount) public override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    function transferFrom(address sender, address recipient, uint amount) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    function increaseAllowance(address spender, uint addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    function decreaseAllowance(address spender, uint subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    function isExcluded(address account) public view returns (bool) {
        return _isExcluded[account];
    }

    function totalFees() public view returns (uint) {
        return _tFeeTotal;
    }

    function totalBurn() public view returns (uint) {
        return _tBurnTotal;
    }

    function setFeeReceiver(address receiver) external onlyOwner() returns (bool) {
        require(receiver != address(0), "Zero address not allowed");
        feeReceiver = receiver;
        return true;
    }

    function totalBurnWithFees() public view returns (uint) {
        return _tBurnTotal.add(_tFeeTotal);
    }

    function reflectionFromToken(uint transferAmount, bool deductTransferFee) public view returns(uint) {
        require(transferAmount <= _tTotal, "Amount must be less than supply");
        if (!deductTransferFee) {
            (uint rAmount,,,,,) = _getValues(transferAmount);
            return rAmount;
        } else {
            (,uint rTransferAmount,,,,) = _getValues(transferAmount);
            return rTransferAmount;
        }
    }

    function tokenFromReflection(uint rAmount) public view returns(uint) {
        require(rAmount <= _rTotal, "Amount must be less than total reflections");
        uint currentRate = _getRate();
        return rAmount.div(currentRate);
    }

    function excludeAccount(address account) external onlyOwner() {
        require(!_isExcluded[account], "Account is already excluded");
        require(account != router, 'Not allowed to exclude router');
        require(account != feeReceiver, "Can not exclude fee receiver");
        if (_rOwned[account] > 0) {
            _tOwned[account] = tokenFromReflection(_rOwned[account]);
        }
        _isExcluded[account] = true;
        _excluded.push(account);
    }

    function includeAccount(address account) external onlyOwner() {
        require(_isExcluded[account], "Account is already included");
        for (uint i = 0; i < _excluded.length; i++) {
            if (_excluded[i] == account) {
                _excluded[i] = _excluded[_excluded.length - 1];
                _tOwned[account] = 0;
                _isExcluded[account] = false;
                _excluded.pop();
                break;
            }
        }
    }

    function _approve(address owner, address spender, uint amount) private {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    function _transfer(address sender, address recipient, uint amount) private {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        require(amount > 0, "Transfer amount must be greater than zero");

        // @dev once all cycles are completed, burn fee will be set to 0 and the protocol
        // reaches its final phase, in which no further supply elasticity will take place
        // and fees will stay at 0

        if (sender != owner() && recipient != owner())
            require(amount <= _MAX_TX_SIZE, "Transfer amount exceeds the maxTxAmount.");

        // @dev 50% fee is burn fee, 50% is fot
        if (_BURN_FEE >= 250) {

            _tTradeCycle = _tTradeCycle.add(amount);


        // @dev adjust current burnFee/fotFee depending on the traded tokens
            if (_tTradeCycle >= (0 * _DECIMALFACTOR) && _tTradeCycle <= (1000000 * _DECIMALFACTOR)) {
                _setFees(500);
            } else if (_tTradeCycle > (1000000 * _DECIMALFACTOR) && _tTradeCycle <= (2000000 * _DECIMALFACTOR)) {
                _setFees(550);
            }   else if (_tTradeCycle > (2000000 * _DECIMALFACTOR) && _tTradeCycle <= (3000000 * _DECIMALFACTOR)) {
                _setFees(600);
            }   else if (_tTradeCycle > (3000000 * _DECIMALFACTOR) && _tTradeCycle <= (4000000 * _DECIMALFACTOR)) {
                _setFees(650);
            } else if (_tTradeCycle > (4000000 * _DECIMALFACTOR) && _tTradeCycle <= (5000000 * _DECIMALFACTOR)) {
                _setFees(700);
            } else if (_tTradeCycle > (5000000 * _DECIMALFACTOR) && _tTradeCycle <= (6000000 * _DECIMALFACTOR)) {
                _setFees(750);
            } else if (_tTradeCycle > (6000000 * _DECIMALFACTOR) && _tTradeCycle <= (7000000 * _DECIMALFACTOR)) {
                _setFees(800);
            } else if (_tTradeCycle > (7000000 * _DECIMALFACTOR) && _tTradeCycle <= (8000000 * _DECIMALFACTOR)) {
                _setFees(850);
            } else if (_tTradeCycle > (8000000 * _DECIMALFACTOR) && _tTradeCycle <= (9000000 * _DECIMALFACTOR)) {
                _setFees(900);
            } else if (_tTradeCycle > (9000000 * _DECIMALFACTOR) && _tTradeCycle <= (10000000 * _DECIMALFACTOR)) {
                _setFees(950);
            } else if (_tTradeCycle > (10000000 * _DECIMALFACTOR) && _tTradeCycle <= (11000000 * _DECIMALFACTOR)) {
                _setFees(1000);
            } else if (_tTradeCycle > (11000000 * _DECIMALFACTOR) && _tTradeCycle <= (12000000 * _DECIMALFACTOR)) {
                _setFees(1050);
            } else if (_tTradeCycle > (12000000 * _DECIMALFACTOR) && _tTradeCycle <= (13000000 * _DECIMALFACTOR)) {
                _setFees(1100);
            } else if (_tTradeCycle > (13000000 * _DECIMALFACTOR) && _tTradeCycle <= (14000000 * _DECIMALFACTOR)) {
                _setFees(1150);
            } else if (_tTradeCycle > (14000000 * _DECIMALFACTOR)) {
                _setFees(1200);
            }
        }

        if (_isExcluded[sender] && !_isExcluded[recipient]) {
            _transferFromExcluded(sender, recipient, amount);
        } else if (!_isExcluded[sender] && _isExcluded[recipient]) {
            _transferToExcluded(sender, recipient, amount);
        } else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
            _transferStandard(sender, recipient, amount);
        } else if (_isExcluded[sender] && _isExcluded[recipient]) {
            _transferBothExcluded(sender, recipient, amount);
        } else {
            _transferStandard(sender, recipient, amount);
        }
    }

    function _transferStandard(address sender, address recipient, uint transferAmount) private {
        uint currentRate =  _getRate();
        (uint rAmount, uint rTransferAmount, uint rFee, uint tTransferAmount, uint transferFee, uint transferBurn) = _getValues(transferAmount);
        uint rBurn =  transferBurn.mul(currentRate);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);

        _rOwned[feeReceiver] = _rOwned[feeReceiver].add(rFee);

        _burnAndRebase(rBurn, transferFee, transferBurn);
        emit Transfer(sender, recipient, tTransferAmount);

        if (transferFee > 0) {
            emit Transfer(sender, feeReceiver, transferFee);
        }
    }

    function _transferToExcluded(address sender, address recipient, uint transferAmount) private {
        uint currentRate =  _getRate();
        (uint rAmount, uint rTransferAmount, uint rFee, uint tTransferAmount, uint transferFee, uint transferBurn) = _getValues(transferAmount);
        uint rBurn =  transferBurn.mul(currentRate);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);

        _rOwned[feeReceiver] = _rOwned[feeReceiver].add(rFee);

        _burnAndRebase(rBurn, transferFee, transferBurn);
        emit Transfer(sender, recipient, tTransferAmount);

        if (transferFee > 0) {
            emit Transfer(sender, feeReceiver, transferFee);
        }
    }

    function _transferFromExcluded(address sender, address recipient, uint transferAmount) private {
        uint currentRate =  _getRate();
        (uint rAmount, uint rTransferAmount, uint rFee, uint tTransferAmount, uint transferFee, uint transferBurn) = _getValues(transferAmount);
        uint rBurn =  transferBurn.mul(currentRate);
        _tOwned[sender] = _tOwned[sender].sub(transferAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);

        _rOwned[feeReceiver] = _rOwned[feeReceiver].add(rFee);

        _burnAndRebase(rBurn, transferFee, transferBurn);
        emit Transfer(sender, recipient, tTransferAmount);

        if (transferFee > 0) {
            emit Transfer(sender, feeReceiver, transferFee);
        }
    }

    function _transferBothExcluded(address sender, address recipient, uint transferAmount) private {
        uint currentRate =  _getRate();
        (uint rAmount, uint rTransferAmount, uint rFee, uint tTransferAmount, uint transferFee, uint transferBurn) = _getValues(transferAmount);
        uint rBurn =  transferBurn.mul(currentRate);
        _tOwned[sender] = _tOwned[sender].sub(transferAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);

        _rOwned[feeReceiver] = _rOwned[feeReceiver].add(rFee);

        _burnAndRebase(rBurn, transferFee, transferBurn);
        emit Transfer(sender, recipient, tTransferAmount);

        if (transferFee > 0) {
            emit Transfer(sender, feeReceiver, transferFee);
        }
    }

    function _burnAndRebase(uint rBurn, uint transferFee, uint transferBurn) private {
        _rTotal = _rTotal.sub(rBurn);
        _tFeeTotal = _tFeeTotal.add(transferFee);
        _tBurnTotal = _tBurnTotal.add(transferBurn);
        _tBurnCycle = _tBurnCycle.add(transferBurn).add(transferFee);
        _tTotal = _tTotal.sub(transferBurn);


        // @dev after 1,275,000 tokens burnt, supply is expanded by 500,000 tokens 
        if (_tBurnCycle >= (1275000 * _DECIMALFACTOR)) {
                //set rebase percent
                uint _tRebaseDelta = 500000 * _DECIMALFACTOR;
                _tBurnCycle = _tBurnCycle.sub((1275000 * _DECIMALFACTOR));
                _tTradeCycle = 0;
                _setFees(500);

                _rebase(_tRebaseDelta);
        }
    }

    function burn(uint amount) external override returns (bool) {
        address sender  = _msgSender();
        uint balance = balanceOf(sender);
        require(balance >= amount, "Cannot burn more than on balance");
        require(sender == feeReceiver, "Only feeReceiver");

        uint rBurn =  amount.mul(_getRate());
        _rTotal = _rTotal.sub(rBurn);
        _rOwned[sender] = _rOwned[sender].sub(rBurn);

        _tBurnTotal = _tBurnTotal.add(amount);
        _tTotal = _tTotal.sub(amount);

        emit Transfer(sender, address(0), amount);
        return true;
    }

    function _getValues(uint transferAmount) private view returns (uint, uint, uint, uint, uint, uint) {
        (uint tTransferAmount, uint transferFee, uint transferBurn) = _getTValues(transferAmount, _FOT_FEE, _BURN_FEE);
        (uint rAmount, uint rTransferAmount, uint rFee) = _getRValues(transferAmount, transferFee, transferBurn);
        return (rAmount, rTransferAmount, rFee, tTransferAmount, transferFee, transferBurn);
    }

    function _getTValues(uint transferAmount, uint fotFee, uint burnFee) private pure returns (uint, uint, uint) {
        uint transferFee = ((transferAmount.mul(fotFee)).div(_GRANULARITY)).div(100);
        uint transferBurn = ((transferAmount.mul(burnFee)).div(_GRANULARITY)).div(100);
        uint tTransferAmount = transferAmount.sub(transferFee).sub(transferBurn);
        return (tTransferAmount, transferFee, transferBurn);
    }

    function _getRValues(uint transferAmount, uint transferFee, uint transferBurn) private view returns (uint, uint, uint) {
        uint currentRate =  _getRate();
        uint rAmount = transferAmount.mul(currentRate);
        uint rFee = transferFee.mul(currentRate);
        uint rBurn = transferBurn.mul(currentRate);
        uint rTransferAmount = rAmount.sub(rFee).sub(rBurn);
        return (rAmount, rTransferAmount, rFee);
    }

    function _getRate() private view returns(uint) {
        (uint rSupply, uint tSupply) = _getCurrentSupply();
        return rSupply.div(tSupply);
    }

    function _getCurrentSupply() private view returns(uint, uint) {
        uint rSupply = _rTotal;
        uint tSupply = _tTotal;
        for (uint i = 0; i < _excluded.length; i++) {
            if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
            rSupply = rSupply.sub(_rOwned[_excluded[i]]);
            tSupply = tSupply.sub(_tOwned[_excluded[i]]);
        }
        if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
        return (rSupply, tSupply);
    }


    function _setFees(uint fee) private {
        require(fee >= 0 && fee <= 1500, "fee should be in 0 - 15%");
        if (_BURN_FEE == fee.div(2)) {
            return;
        }

        _BURN_FEE = fee.div(2);
        _FOT_FEE = fee.div(2);
    }

    function setInitialFee() external onlyOwner() {
        require(!_feeSet, "Initial fee already set");
        _setFees(500);
        _feeSet = true;
    }

    function setMaxCycles(uint _maxCycles) public onlyOwner() {
        require(_maxCycles >= _infinityCycle, "Can not set more than current cycle");
        maxCycles = _maxCycles;
    }

    function getBurnFee() public view returns(uint)  {
        return _BURN_FEE;
    }

    function getFee() public view returns(uint)  {
        return _FOT_FEE;
    }

    function _getMaxTxAmount() private pure returns(uint) {
        return _MAX_TX_SIZE;
    }

    function getCycle() public view returns(uint) {
        return _infinityCycle;
    }

    function getBurnCycle() public view returns(uint) {
        return _tBurnCycle;
    }

    function getTradedCycle() public view returns(uint) {
        return _tTradeCycle;
    }

    function _rebase(uint supplyDelta) internal {
        _infinityCycle = _infinityCycle.add(1);
        _tTotal = _tTotal.add(supplyDelta);

        if (_infinityCycle > maxCycles) {
            _setFees(0);
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

{
  "compilationTarget": {
    "contracts/InfinityProtocol.sol": "InfinityProtocol"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}