Typhon

/**
 *Submitted for verification at Etherscan.io on 2020-10-01
*/

/**
 *Submitted for verification at Etherscan.io on 2020-09-29
*/

/**
 *Submitted for verification at Etherscan.io on 2019-12-12
*/

pragma solidity ^0.5.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

library Roles {
    struct Role {
        mapping (address => bool) bearer;
    }

    /**
     * @dev give an account access to this role
     */
    function add(Role storage role, address account) internal {
        require(account != address(0));
        require(!has(role, account));

        role.bearer[account] = true;
    }

    /**
     * @dev remove an account's access to this role
     */
    function remove(Role storage role, address account) internal {
        require(account != address(0));
        require(has(role, account));

        role.bearer[account] = false;
    }

    /**
     * @dev check if an account has this role
     * @return bool
     */
    function has(Role storage role, address account) internal view returns (bool) {
        require(account != address(0));
        return role.bearer[account];
    }
}

contract Ownable {
    address public owner;
    address public newOwner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    constructor() public {
        owner = msg.sender;
        newOwner = address(0);
    }

    modifier onlyOwner() {
        require(msg.sender == owner);
        _;
    }
    modifier onlyNewOwner() {
        require(msg.sender != address(0));
        require(msg.sender == newOwner);
        _;
    }

    function isOwner(address account) public view returns (bool) {
        if( account == owner ){
            return true;
        }
        else {
            return false;
        }
    }

    function transferOwnership(address _newOwner) public onlyOwner {
        require(_newOwner != address(0));
        newOwner = _newOwner;
    }

    function acceptOwnership() public onlyNewOwner returns(bool) {
        emit OwnershipTransferred(owner, newOwner);
        owner = newOwner;
        newOwner = address(0);
    }
}

contract PauserRole is Ownable{
    using Roles for Roles.Role;

    event PauserAdded(address indexed account);
    event PauserRemoved(address indexed account);

    Roles.Role private _pausers;

    constructor () internal {
        _addPauser(msg.sender);
    }

    modifier onlyPauser() {
        require(isPauser(msg.sender)|| isOwner(msg.sender));
        _;
    }

    function isPauser(address account) public view returns (bool) {
        return _pausers.has(account);
    }

    function addPauser(address account) public onlyPauser {
        _addPauser(account);
    }

    function removePauser(address account) public onlyOwner {
        _removePauser(account);
    }

    function renouncePauser() public {
        _removePauser(msg.sender);
    }

    function _addPauser(address account) internal {
        _pausers.add(account);
        emit PauserAdded(account);
    }

    function _removePauser(address account) internal {
        _pausers.remove(account);
        emit PauserRemoved(account);
    }
}

contract Pausable is PauserRole {
    event Paused(address account);
    event Unpaused(address account);

    bool private _paused;

    constructor () internal {
        _paused = false;
    }

    /**
     * @return true if the contract is paused, false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!_paused);
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     */
    modifier whenPaused() {
        require(_paused);
        _;
    }

    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() public onlyPauser whenNotPaused {
        _paused = true;
        emit Paused(msg.sender);
    }

    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() public onlyPauser whenPaused {
        _paused = false;
        emit Unpaused(msg.sender);
    }
}

interface IERC20 {
    function transfer(address to, uint256 value) external returns (bool);

    function approve(address spender, uint256 value) external returns (bool);

    function transferFrom(address from, address to, uint256 value) external returns (bool);

    function totalSupply() external view returns (uint256);

    function balanceOf(address who) external view returns (uint256);

    function allowance(address owner, address spender) external view returns (uint256);

    event Transfer(address indexed from, address indexed to, uint256 value);

    event Approval(address indexed owner, address indexed spender, uint256 value);
}

contract ERC20 is IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) internal _balances;

    mapping (address => mapping (address => uint256)) internal _allowed;

    uint256 private _totalSupply;

    /**
    * @dev Total number of tokens in existence
    */
    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    /**
    * @dev Gets the balance of the specified address.
    * @param owner The address to query the balance of.
    * @return An uint256 representing the amount owned by the passed address.
    */
    function balanceOf(address owner) public view returns (uint256) {
        return _balances[owner];
    }

    /**
     * @dev Function to check the amount of tokens that an owner allowed to a spender.
     * @param owner address The address which owns the funds.
     * @param spender address The address which will spend the funds.
     * @return A uint256 specifying the amount of tokens still available for the spender.
     */
    function allowance(address owner, address spender) public view returns (uint256) {
        return _allowed[owner][spender];
    }

    /**
     * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
     * Beware that changing an allowance with this method brings the risk that someone may use both the old
     * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
     * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     */
    function approve(address spender, uint256 value) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = value;
        emit Approval(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev Transfer tokens from one address to another.
     * Note that while this function emits an Approval event, this is not required as per the specification,
     * and other compliant implementations may not emit the event.
     * @param from address The address which you want to send tokens from
     * @param to address The address which you want to transfer to
     * @param value uint256 the amount of tokens to be transferred
     */
    function transferFrom(address from, address to, uint256 value) public returns (bool) {
        _allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
        _transfer(from, to, value);
        emit Approval(from, msg.sender, _allowed[from][msg.sender]);
        return true;
    }

    /**
     * @dev Increase the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed_[_spender] == 0. To increment
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param addedValue The amount of tokens to increase the allowance by.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = _allowed[msg.sender][spender].add(addedValue);
        emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
        return true;
    }

    /**
     * @dev Decrease the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed_[_spender] == 0. To decrement
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param subtractedValue The amount of tokens to decrease the allowance by.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = _allowed[msg.sender][spender].sub(subtractedValue);
        emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
        return true;
    }


    /**
    * @dev Transfer token for a specified address
    * @param to The address to transfer to.
    * @param value The amount to be transferred.
    */
    function transfer(address to, uint256 value) public returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    /**
    * @dev Transfer token for a specified addresses
    * @param from The address to transfer from.
    * @param to The address to transfer to.
    * @param value The amount to be transferred.
    */
    function _transfer(address from, address to, uint256 value) internal {
        require(to != address(0));
        require(from != address(0));

        _balances[from] = _balances[from].sub(value);
        _balances[to] = _balances[to].add(value);
        emit Transfer(from, to, value);
    }

    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    
    
    /**
     * @dev Internal function that burns an amount of the token of a given
     * account.
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burn(address account, uint256 value) internal {
        require(account != address(0));

        _totalSupply = _totalSupply.sub(value);
        _balances[account] = _balances[account].sub(value);
        emit Transfer(account, address(0), value);
    }


    /**
     * @dev Internal function that burns an amount of the token of a given
     * account, deducting from the sender's allowance for said account. Uses the
     * internal burn function.
     * Emits an Approval event (reflecting the reduced allowance).
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burnFrom(address account, uint256 value) internal {
        _allowed[account][msg.sender] = _allowed[account][msg.sender].sub(value);
        _burn(account, value);
        emit Approval(account, msg.sender, _allowed[account][msg.sender]);
    }

    /**
     * @dev Internal function that mints an amount of the token and assigns it to
     * an account. This encapsulates the modification of balances such that the
     * proper events are emitted.
     * @param account The account that will receive the created tokens.
     * @param value The amount that will be created.
     */
    function _mint(address account, uint256 value) internal {
        require(account != address(0));

        _totalSupply = _totalSupply.add(value);
        _balances[account] = _balances[account].add(value);
        emit Transfer(address(0), account, value);
    }
}

contract ERC20Pausable is ERC20, Pausable {
    function transfer(address to, uint256 value) public whenNotPaused returns (bool) {
        return super.transfer(to, value);
    }

    function transferFrom(address from, address to, uint256 value) public whenNotPaused returns (bool) {
        return super.transferFrom(from, to, value);
    }
}

contract ERC20Detailed is IERC20 {
    string private _name;
    string private _symbol;
    uint8 private _decimals;

    constructor (string memory name, string memory symbol, uint8 decimals) public {
        _name = name;
        _symbol = symbol;
        _decimals = decimals;
    }

    /**
     * @return the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @return the symbol of the token.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @return the number of decimals of the token.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }
}

contract ERC20Custom is ERC20Detailed, ERC20Pausable {

    struct LockInfo {
        uint256 _releaseTime;
        uint256 _amount;
    }

    mapping (address => LockInfo[]) public timelockList;
    mapping (address => bool) public frozenAccount;

    event Freeze(address indexed holder);
    event Unfreeze(address indexed holder);
    event Lock(address indexed holder, uint256 value, uint256 releaseTime);
    event Unlock(address indexed holder, uint256 value);

    modifier notFrozen(address _holder) {
        require(!frozenAccount[_holder]);
        _;
    }

    constructor(
        uint256 initialSupply,
        uint8 decimals,
        string memory tokenName,
        string memory tokenSymbol
    ) ERC20Detailed(tokenName, tokenSymbol, decimals) public  {
        _mint(msg.sender, initialSupply * (10 ** uint256(decimals)));
    }

    function timelockListLength(address owner) public view returns (uint256) {
        return timelockList[owner].length;
    }

    function balanceOf(address owner) public view returns (uint256) {

        uint256 totalBalance = super.balanceOf(owner);
        if( timelockList[owner].length >0 ){
            for(uint i=0; i<timelockList[owner].length;i++){
                totalBalance = totalBalance.add(timelockList[owner][i]._amount);
            }
        }

        return totalBalance;
    }

    function balanceOfTimelocked(address owner) public view returns (uint256) {

        uint256 totalLocked = 0;
        if( timelockList[owner].length >0 ){
            for(uint i=0; i<timelockList[owner].length;i++){
                totalLocked = totalLocked.add(timelockList[owner][i]._amount);
            }
        }

        return totalLocked;
    }

    function balanceOfAvailable(address owner) public view returns (uint256) {

        uint256 totalBalance = super.balanceOf(owner);
        return totalBalance;
    }

    function transfer(address to, uint256 value) public notFrozen(msg.sender) returns (bool) {
        if (timelockList[msg.sender].length > 0 ) {
            _autoUnlock(msg.sender);
        }
        return super.transfer(to, value);
    }

    function transferFrom(address from, address to, uint256 value) public notFrozen(from) returns (bool) {
        if (timelockList[from].length > 0) {
            _autoUnlock(from);
        }
        return super.transferFrom(from, to, value);
    }

    function freezeAccount(address holder) public onlyPauser returns (bool) {
        require(!frozenAccount[holder]);
        require(timelockList[holder].length == 0);
        frozenAccount[holder] = true;
        emit Freeze(holder);
        return true;
    }

    function unfreezeAccount(address holder) public onlyPauser returns (bool) {
        require(frozenAccount[holder]);
        frozenAccount[holder] = false;
        emit Unfreeze(holder);
        return true;
    }

    function lockByQuantity(address holder, uint256 value, uint256 releaseTime) public onlyPauser returns (bool) {
        require(!frozenAccount[holder]);
        _lock(holder,value,releaseTime);
        return true;
    }

    function unlockByQuantity(address holder, uint256 value, uint256 releaseTime) public onlyPauser returns (bool) {
        //1
        require(!frozenAccount[holder]);
        //2
        require(timelockList[holder].length >0);

        //3
        uint256 totalLocked;
        for(uint idx = 0; idx < timelockList[holder].length ; idx++ ){
            totalLocked = totalLocked.add(timelockList[holder][idx]._amount);
        }
        require(totalLocked >value);

        //4
        for(uint idx = 0; idx < timelockList[holder].length ; idx++ ) {
            if( _unlock(holder, idx) ) {
                idx -=1;
            }
        }

        //5
        _lock(holder,totalLocked.sub(value),releaseTime);

        return true;
    }

    function transferWithLock(address holder, uint256 value, uint256 releaseTime) public onlyPauser returns (bool) {
        _transfer(msg.sender, holder, value);
        _lock(holder,value,releaseTime);
        return true;
    }

    function unlock(address holder, uint256 idx) public onlyPauser returns (bool) {
        require( timelockList[holder].length > idx, "AhnLog_There is not lock info.");
        _unlock(holder,idx);
        return true;
    }


    function _lock(address holder, uint256 value, uint256 releaseTime) internal returns (bool) {
        _balances[holder] = _balances[holder].sub(value);
        timelockList[holder].push( LockInfo(releaseTime, value) );

        emit Lock(holder, value, releaseTime);
        return true;
    }

    function _unlock(address holder, uint256 idx) internal returns(bool) {
        LockInfo storage lockinfo = timelockList[holder][idx];
        uint256 releaseAmount = lockinfo._amount;

        delete timelockList[holder][idx];
        timelockList[holder][idx] = timelockList[holder][timelockList[holder].length.sub(1)];
        timelockList[holder].length -=1;

        emit Unlock(holder, releaseAmount);
        _balances[holder] = _balances[holder].add(releaseAmount);

        return true;
    }

    function _autoUnlock(address holder) internal returns (bool) {
        for(uint256 idx =0; idx < timelockList[holder].length ; idx++ ) {
            if (timelockList[holder][idx]._releaseTime <= now) {
                // If lockupinfo was deleted, loop restart at same position.
                if( _unlock(holder, idx) ) {
                    idx -=1;
                }
            }
        }
        return true;
    }
}

{
  "compilationTarget": {
    "ERC20Custom.sol": "ERC20Custom"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}