cMyKatz

pragma solidity ^0.8.0;


// 
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// 
/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

// 
/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// 
/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// 
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// 
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// 
/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// 
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// 
/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _owners[tokenId];
        require(owner != address(0), "ERC721: owner query for nonexistent token");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overriden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not owner nor approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        require(operator != _msgSender(), "ERC721: approve to caller");

        _operatorApprovals[_msgSender()][operator] = approved;
        emit ApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _safeTransfer(from, to, tokenId, _data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `_data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _owners[tokenId] != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, _data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId);

        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(address(0), to, tokenId);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId);

        // Clear approvals
        _approve(address(0), tokenId);

        _balances[owner] -= 1;
        delete _owners[tokenId];

        emit Transfer(owner, address(0), tokenId);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId);

        _balances[from] -= 1;
        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits a {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
                return retval == IERC721Receiver.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {}
}

// 
/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Enumerable is IERC721 {
    /**
     * @dev Returns the total amount of tokens stored by the contract.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
     * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);

    /**
     * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
     * Use along with {totalSupply} to enumerate all tokens.
     */
    function tokenByIndex(uint256 index) external view returns (uint256);
}

// 
/**
 * @dev This implements an optional extension of {ERC721} defined in the EIP that adds
 * enumerability of all the token ids in the contract as well as all token ids owned by each
 * account.
 */
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
    // Mapping from owner to list of owned token IDs
    mapping(address => mapping(uint256 => uint256)) private _ownedTokens;

    // Mapping from token ID to index of the owner tokens list
    mapping(uint256 => uint256) private _ownedTokensIndex;

    // Array with all token ids, used for enumeration
    uint256[] private _allTokens;

    // Mapping from token id to position in the allTokens array
    mapping(uint256 => uint256) private _allTokensIndex;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
        return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
        require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
        return _ownedTokens[owner][index];
    }

    /**
     * @dev See {IERC721Enumerable-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _allTokens.length;
    }

    /**
     * @dev See {IERC721Enumerable-tokenByIndex}.
     */
    function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
        require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
        return _allTokens[index];
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual override {
        super._beforeTokenTransfer(from, to, tokenId);

        if (from == address(0)) {
            _addTokenToAllTokensEnumeration(tokenId);
        } else if (from != to) {
            _removeTokenFromOwnerEnumeration(from, tokenId);
        }
        if (to == address(0)) {
            _removeTokenFromAllTokensEnumeration(tokenId);
        } else if (to != from) {
            _addTokenToOwnerEnumeration(to, tokenId);
        }
    }

    /**
     * @dev Private function to add a token to this extension's ownership-tracking data structures.
     * @param to address representing the new owner of the given token ID
     * @param tokenId uint256 ID of the token to be added to the tokens list of the given address
     */
    function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
        uint256 length = ERC721.balanceOf(to);
        _ownedTokens[to][length] = tokenId;
        _ownedTokensIndex[tokenId] = length;
    }

    /**
     * @dev Private function to add a token to this extension's token tracking data structures.
     * @param tokenId uint256 ID of the token to be added to the tokens list
     */
    function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
        _allTokensIndex[tokenId] = _allTokens.length;
        _allTokens.push(tokenId);
    }

    /**
     * @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
     * while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
     * gas optimizations e.g. when performing a transfer operation (avoiding double writes).
     * This has O(1) time complexity, but alters the order of the _ownedTokens array.
     * @param from address representing the previous owner of the given token ID
     * @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
     */
    function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
        // To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).

        uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
        uint256 tokenIndex = _ownedTokensIndex[tokenId];

        // When the token to delete is the last token, the swap operation is unnecessary
        if (tokenIndex != lastTokenIndex) {
            uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];

            _ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
            _ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
        }

        // This also deletes the contents at the last position of the array
        delete _ownedTokensIndex[tokenId];
        delete _ownedTokens[from][lastTokenIndex];
    }

    /**
     * @dev Private function to remove a token from this extension's token tracking data structures.
     * This has O(1) time complexity, but alters the order of the _allTokens array.
     * @param tokenId uint256 ID of the token to be removed from the tokens list
     */
    function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
        // To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).

        uint256 lastTokenIndex = _allTokens.length - 1;
        uint256 tokenIndex = _allTokensIndex[tokenId];

        // When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
        // rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
        // an 'if' statement (like in _removeTokenFromOwnerEnumeration)
        uint256 lastTokenId = _allTokens[lastTokenIndex];

        _allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
        _allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index

        // This also deletes the contents at the last position of the array
        delete _allTokensIndex[tokenId];
        _allTokens.pop();
    }
}

// 
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// 
interface IMiece is IERC20 {
    function burnFrom(address account, uint256 amount) external;
}

// 
library CatsLibrary {
    string internal constant TABLE =
        "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";

    function encode(bytes memory data) internal pure returns (string memory) {
        if (data.length == 0) return "";

        // load the table into memory
        string memory table = TABLE;

        // multiply by 4/3 rounded up
        uint256 encodedLen = 4 * ((data.length + 2) / 3);

        // add some extra buffer at the end required for the writing
        string memory result = new string(encodedLen + 32);

        assembly {
            // set the actual output length
            mstore(result, encodedLen)

            // prepare the lookup table
            let tablePtr := add(table, 1)

            // input ptr
            let dataPtr := data
            let endPtr := add(dataPtr, mload(data))

            // result ptr, jump over length
            let resultPtr := add(result, 32)

            // run over the input, 3 bytes at a time
            for {

            } lt(dataPtr, endPtr) {

            } {
                dataPtr := add(dataPtr, 3)

                // read 3 bytes
                let input := mload(dataPtr)

                // write 4 characters
                mstore(
                    resultPtr,
                    shl(248, mload(add(tablePtr, and(shr(18, input), 0x3F))))
                )
                resultPtr := add(resultPtr, 1)
                mstore(
                    resultPtr,
                    shl(248, mload(add(tablePtr, and(shr(12, input), 0x3F))))
                )
                resultPtr := add(resultPtr, 1)
                mstore(
                    resultPtr,
                    shl(248, mload(add(tablePtr, and(shr(6, input), 0x3F))))
                )
                resultPtr := add(resultPtr, 1)
                mstore(
                    resultPtr,
                    shl(248, mload(add(tablePtr, and(input, 0x3F))))
                )
                resultPtr := add(resultPtr, 1)
            }

            // padding with '='
            switch mod(mload(data), 3)
            case 1 {
                mstore(sub(resultPtr, 2), shl(240, 0x3d3d))
            }
            case 2 {
                mstore(sub(resultPtr, 1), shl(248, 0x3d))
            }
        }

        return result;
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    function parseInt(string memory _a)
        internal
        pure
        returns (uint8 _parsedInt)
    {
        bytes memory bresult = bytes(_a);
        uint8 mint = 0;
        for (uint8 i = 0; i < bresult.length; i++) {
            if (
                (uint8(uint8(bresult[i])) >= 48) &&
                (uint8(uint8(bresult[i])) <= 57)
            ) {
                mint *= 10;
                mint += uint8(bresult[i]) - 48;
            }
        }
        return mint;
    }

    function substring(
        string memory str,
        uint256 startIndex,
        uint256 endIndex
    ) internal pure returns (string memory) {
        bytes memory strBytes = bytes(str);
        bytes memory result = new bytes(endIndex - startIndex);
        for (uint256 i = startIndex; i < endIndex; i++) {
            result[i - startIndex] = strBytes[i];
        }
        return string(result);
    }

    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }
}

// 
contract Cats is ERC721Enumerable {

    using CatsLibrary for uint8;

    struct Trait {
        string traitName;
        string traitType;
        string pixels;
        uint256 pixelCount;
    }
    
    // Price
    uint256 public price = 50000000000000000; // 0.05 eth

    //Mappings
    mapping(uint256 => Trait[]) public traitTypes;
    mapping(string => bool) hashToMinted;
    mapping(uint256 => string) internal tokenIdToHash;

    //uint256s
    uint256 MAX_SUPPLY = 10000;
    uint256 MINTS_PER_TIER = 2000;
    uint256 SEED_NONCE = 0;

    //string arrays
    string[] LETTERS = [
        "a",
        "b",
        "c",
        "d",
        "e",
        "f",
        "g",
        "h",
        "i",
        "j",
        "k",
        "l",
        "m",
        "n",
        "o",
        "p",
        "q",
        "r",
        "s",
        "t",
        "u",
        "v",
        "w",
        "x",
        "y",
        "z"
    ];

    //uint arrays
    uint16[][8] TIERS;

    //address
    address mieceAddress;
    address _owner;

    constructor() ERC721("Cats", "MICE") {
        _owner = msg.sender;

        //Declare all the rarity tiers

        //Hat
        TIERS[0] = [50, 150, 200, 300, 400, 500, 600, 900, 1200, 5700];
        //whiskers
        TIERS[1] = [200, 800, 1000, 3000, 5000];
        //Neck
        TIERS[2] = [300, 800, 900, 1000, 7000];
        //Earrings
        TIERS[3] = [50, 200, 300, 300, 9150];
        //Eyes
        TIERS[4] = [50, 100, 400, 450, 500, 700, 1800, 2000, 2000, 2000];
        //Mouth
        TIERS[5] = [1428, 1428, 1428, 1429, 1429, 1429, 1429];
        //Nose
        TIERS[6] = [2000, 2000, 2000, 2000, 2000];
        //Character
        TIERS[7] = [20, 70, 721, 1000, 1155, 1200, 1300, 1434, 1541, 1559];
    }

    /*
  __  __ _     _   _             ___             _   _             
 |  \/  (_)_ _| |_(_)_ _  __ _  | __|  _ _ _  __| |_(_)___ _ _  ___
 | |\/| | | ' \  _| | ' \/ _` | | _| || | ' \/ _|  _| / _ \ ' \(_-<
 |_|  |_|_|_||_\__|_|_||_\__, | |_| \_,_|_||_\__|\__|_\___/_||_/__/
                         |___/                                     
   */

    /**
     * @dev Converts a digit from 0 - 10000 into its corresponding rarity based on the given rarity tier.
     * @param _randinput The input from 0 - 10000 to use for rarity gen.
     * @param _rarityTier The tier to use.
     */
    function rarityGen(uint256 _randinput, uint8 _rarityTier)
        internal
        view
        returns (string memory)
    {
        uint16 currentLowerBound = 0;
        for (uint8 i = 0; i < TIERS[_rarityTier].length; i++) {
            uint16 thisPercentage = TIERS[_rarityTier][i];
            if (
                _randinput >= currentLowerBound &&
                _randinput < currentLowerBound + thisPercentage
            ) return i.toString();
            currentLowerBound = currentLowerBound + thisPercentage;
        }

        revert();
    }

    /**
     * @dev Generates a 9 digit hash from a tokenId, address, and random number.
     * @param _t The token id to be used within the hash.
     * @param _a The address to be used within the hash.
     * @param _c The custom nonce to be used within the hash.
     */
    function hash(
        uint256 _t,
        address _a,
        uint256 _c
    ) internal returns (string memory) {
        require(_c < 10);

        // This will generate a 9 character string.
        //The last 8 digits are random, the first is 0, due to the mouse not being burned.
        string memory currentHash = "0";

        for (uint8 i = 0; i < 8; i++) {
            SEED_NONCE++;
            uint16 _randinput = uint16(
                uint256(
                    keccak256(
                        abi.encodePacked(
                            block.timestamp,
                            block.difficulty,
                            _t,
                            _a,
                            _c,
                            SEED_NONCE
                        )
                    )
                ) % 10000
            );

            currentHash = string(
                abi.encodePacked(currentHash, rarityGen(_randinput, i))
            );
        }

        if (hashToMinted[currentHash]) return hash(_t, _a, _c + 1);

        return currentHash;
    }

    /**
     * @dev Returns the current miece cost of mint.
     */
    function currentMieceCost() public view returns (uint256) {
        uint256 _totalSupply = totalSupply();

        if (_totalSupply <= 2000) return 1000000000000000000;
        if (_totalSupply > 2000 && _totalSupply <= 4000)
            return 1000000000000000000;
        if (_totalSupply > 4000 && _totalSupply <= 6000)
            return 2000000000000000000;
        if (_totalSupply > 6000 && _totalSupply <= 8000)
            return 3000000000000000000;
        if (_totalSupply > 8000 && _totalSupply <= 10000)
            return 4000000000000000000;

        revert();
    }

    /**
     * @dev Mint internal, this is to avoid code duplication.
     */
    function mintInternal() internal {
        uint256 _totalSupply = totalSupply();
        require(_totalSupply < MAX_SUPPLY);
        require(!CatsLibrary.isContract(msg.sender));

        uint256 thisTokenId = _totalSupply;

        tokenIdToHash[thisTokenId] = hash(thisTokenId, msg.sender, 0);

        hashToMinted[tokenIdToHash[thisTokenId]] = true;

        _mint(msg.sender, thisTokenId);
    }
    

    /**
     * @dev Changes the price
     */
    function changePrice(uint256 _newPrice) public onlyOwner {
        price = _newPrice;
    }

    /**
     * @dev Mints new tokens.
     */
    function mintCats(uint256 _times) public payable {
        require((_times > 0 && _times <= 20) && (msg.value == _times * price) && (totalSupply() < MINTS_PER_TIER), "t");
        
        for(uint256 i=0; i< _times; i++){
             mintInternal();
        }
    }
    /**
     * @dev Mint for Miece
     */
    function mintCatWithToken() public {        
        //Burn this much miece
        IMiece(mieceAddress).burnFrom(msg.sender, currentMieceCost());
        return mintInternal();
    }

    /**
     * @dev Burns and mints new.
     * @param _tokenId The token to burn.
     */
    function burnForMint(uint256 _tokenId) public {
        require(ownerOf(_tokenId) == msg.sender);

        //Burn token
        _transfer(
            msg.sender,
            0x000000000000000000000000000000000000dEaD,
            _tokenId
        );

        mintInternal();
    }


    function withdraw() public onlyOwner {
        uint256 balance = address(this).balance;

        payable(msg.sender).transfer(balance);
    }   


    /*
 ____     ___   ____  ___        _____  __ __  ____     __ ______  ____  ___   ____   _____
|    \   /  _] /    ||   \      |     ||  |  ||    \   /  ]      ||    |/   \ |    \ / ___/
|  D  ) /  [_ |  o  ||    \     |   __||  |  ||  _  | /  /|      | |  ||     ||  _  (   \_ 
|    / |    _]|     ||  D  |    |  |_  |  |  ||  |  |/  / |_|  |_| |  ||  O  ||  |  |\__  |
|    \ |   [_ |  _  ||     |    |   _] |  :  ||  |  /   \_  |  |   |  ||     ||  |  |/  \ |
|  .  \|     ||  |  ||     |    |  |   |     ||  |  \     | |  |   |  ||     ||  |  |\    |
|__|\_||_____||__|__||_____|    |__|    \__,_||__|__|\____| |__|  |____|\___/ |__|__| \___|
                                                                                           
*/

    /**
     * @dev Helper function to reduce pixel size within contract
     */
    function letterToNumber(string memory _inputLetter)
        internal
        view
        returns (uint8)
    {
        for (uint8 i = 0; i < LETTERS.length; i++) {
            if (
                keccak256(abi.encodePacked((LETTERS[i]))) ==
                keccak256(abi.encodePacked((_inputLetter)))
            ) return (i + 1);
        }
        revert();
    }

    /**
     * @dev Hash to SVG function
     */
    function hashToSVG(string memory _hash)
        public
        view
        returns (string memory)
    {
        string memory svgString;
        bool[24][24] memory placedPixels;

        for (uint8 i = 0; i < 9; i++) { 
            uint8 thisTraitIndex = CatsLibrary.parseInt(
                CatsLibrary.substring(_hash, i, i + 1)
            );

            for (
                uint16 j = 0;
                j < traitTypes[i][thisTraitIndex].pixelCount; // <
                j++
            ) {
                string memory thisPixel = CatsLibrary.substring(
                    traitTypes[i][thisTraitIndex].pixels,
                    j * 4,
                    j * 4 + 4
                );

                uint8 x = letterToNumber(
                    CatsLibrary.substring(thisPixel, 0, 1)
                );
                uint8 y = letterToNumber(
                    CatsLibrary.substring(thisPixel, 1, 2)
                );

                if (placedPixels[x][y]) continue;

                svgString = string(
                    abi.encodePacked(
                        svgString,
                        "<rect class='c",
                        CatsLibrary.substring(thisPixel, 2, 4),
                        "' x='",
                        x.toString(),
                        "' y='",
                        y.toString(),
                        "'/>"
                    )
                );

                placedPixels[x][y] = true;
            }
        }

        svgString = string(
            abi.encodePacked(
                '<svg id="c" xmlns="http://www.w3.org/2000/svg" preserveAspectRatio="xMinYMin meet" viewBox="0 0 24 24"> ',
                svgString,
               // "<style>rect{width:1px;height:1px;} #mouse-svg{shape-rendering: crispedges;} .c00{fill:#000000}.c01{fill:#B1ADAC}.c02{fill:#D7D7D7}.c03{fill:#FFA6A6}.c04{fill:#FFD4D5}.c05{fill:#B9AD95}.c06{fill:#E2D6BE}.c07{fill:#7F625A}.c08{fill:#A58F82}.c09{fill:#4B1E0B}.c10{fill:#6D2C10}.c11{fill:#D8D8D8}.c12{fill:#F5F5F5}.c13{fill:#433D4B}.c14{fill:#8D949C}.c15{fill:#05FF00}.c16{fill:#01C700}.c17{fill:#0B8F08}.c18{fill:#421C13}.c19{fill:#6B392A}.c20{fill:#A35E40}.c21{fill:#DCBD91}.c22{fill:#777777}.c23{fill:#848484}.c24{fill:#ABABAB}.c25{fill:#BABABA}.c26{fill:#C7C7C7}.c27{fill:#EAEAEA}.c28{fill:#0C76AA}.c29{fill:#0E97DB}.c30{fill:#10A4EC}.c31{fill:#13B0FF}.c32{fill:#2EB9FE}.c33{fill:#54CCFF}.c34{fill:#50C0F2}.c35{fill:#54CCFF}.c36{fill:#72DAFF}.c37{fill:#B6EAFF}.c38{fill:#FFFFFF}.c39{fill:#954546}.c40{fill:#0B87F7}.c41{fill:#FF2626}.c42{fill:#180F02}.c43{fill:#2B2319}.c44{fill:#FBDD4B}.c45{fill:#F5B923}.c46{fill:#CC8A18}.c47{fill:#3C2203}.c48{fill:#53320B}.c49{fill:#7B501D}.c50{fill:#FFE646}.c51{fill:#FFD627}.c52{fill:#F5B700}.c53{fill:#242424}.c54{fill:#4A4A4A}.c55{fill:#676767}.c56{fill:#F08306}.c57{fill:#FCA30E}.c58{fill:#FEBC0E}.c59{fill:#FBEC1C}.c60{fill:#14242F}.c61{fill:#B06837}.c62{fill:#8F4B0E}.c63{fill:#D88227}.c64{fill:#B06837}</style></svg>"
                "<style>rect{width:1px;height:1px;}#c{shape-rendering: crispedges;}.c00{fill:#f6767b}.c01{fill:#ffffff}.c02{fill:#000000}.c03{fill:#c1008b}.c04{fill:#dc009e}.c05{fill:#ef00a9}.c06{fill:#ff0043}.c07{fill:#c74249}.c08{fill:#aa343a}.c09{fill:#363737}.c10{fill:#1c1c1c}.c11{fill:#2c2c2c}.c12{fill:#6a9cc5}.c13{fill:#9fd2fc}.c14{fill:#cd6100}.c15{fill:#2f2f2f}.c16{fill:#fd7500}.c17{fill:#f68d2f}.c18{fill:#474747}.c19{fill:#585858}.c20{fill:#242424}.c21{fill:#9c7d6a}.c22{fill:#3e3e3e}.c23{fill:#202020}.c24{fill:#b05514}.c25{fill:#733e39}.c26{fill:#f2d000}.c27{fill:#f3dd00}.c28{fill:#cccccd}.c29{fill:#dad4d2}.c30{fill:#ece3e0}.c31{fill:#00adc0}.c32{fill:#00b8cc}.c33{fill:#00c4db}.c34{fill:#4c3b2f}.c35{fill:#695038}.c36{fill:#b58152}.c37{fill:#008c9b}.c38{fill:#c5c5db}.c39{fill:#00d6ff}.c40{fill:#df3453}.c41{fill:#d4b500}.c42{fill:#523747}.c43{fill:#3f4043}.c44{fill:#5f5e5c}.c45{fill:#c69e94}.c46{fill:#a1958c}.c47{fill:#981870}.c48{fill:#cbba00}.c49{fill:#dfcc00}.c50{fill:#13a72e}.c51{fill:#0c8a24}</style></svg>"
            )
        );

        return svgString;
    }

    /**
     * @dev Hash to metadata function
     */
    function hashToMetadata(string memory _hash)
        public
        view
        returns (string memory)
    {
        string memory metadataString;

        for (uint8 i = 0; i < 9; i++) { //9
            uint8 thisTraitIndex = CatsLibrary.parseInt(
                CatsLibrary.substring(_hash, i, i + 1)
            );

            metadataString = string(
                abi.encodePacked(
                    metadataString,
                    '{"trait_type":"',
                    traitTypes[i][thisTraitIndex].traitType,
                    '","value":"',
                    traitTypes[i][thisTraitIndex].traitName,
                    '"}'
                )
            );

            if (i != 8)
                metadataString = string(abi.encodePacked(metadataString, ","));
        }

        return string(abi.encodePacked("[", metadataString, "]"));
    }

    /**
     * @dev Returns the SVG and metadata for a token Id
     * @param _tokenId The tokenId to return the SVG and metadata for.
     */
    function tokenURI(uint256 _tokenId)
        public
        view
        override
        returns (string memory)
    {
        require(_exists(_tokenId));

        string memory tokenHash = _tokenIdToHash(_tokenId);

        return
            string(
                abi.encodePacked(
                    "data:application/json;base64,",
                    CatsLibrary.encode(
                        bytes(
                            string(
                                abi.encodePacked(
                                    '{"name": "cmyKatz #',
                                    CatsLibrary.toString(_tokenId),
                                    '", "description": "cmyKatz is a collection of 10,000 unique cats. All the metadata and images stored 100% on-chain.", "image": "data:image/svg+xml;base64,',
                                    CatsLibrary.encode(
                                        bytes(hashToSVG(tokenHash))
                                    ),
                                    '","attributes":',
                                    hashToMetadata(tokenHash),
                                    "}"
                                )
                            )
                        )
                    )
                )
            );
    }

    /**
     * @dev Returns a hash for a given tokenId
     * @param _tokenId The tokenId to return the hash for.
     */
    function _tokenIdToHash(uint256 _tokenId)
        public
        view
        returns (string memory)
    {
        string memory tokenHash = tokenIdToHash[_tokenId];
        //If this is a burned token, override the previous hash
        if (ownerOf(_tokenId) == 0x000000000000000000000000000000000000dEaD) {
            tokenHash = string(
                abi.encodePacked(
                    "1",
                    CatsLibrary.substring(tokenHash, 1, 9)
                )
            );
        }

        return tokenHash;
    }

    /**
     * @dev Returns the wallet of a given wallet. Mainly for ease for frontend devs.
     * @param _wallet The wallet to get the tokens of.
     */
    function walletOfOwner(address _wallet)
        public
        view
        returns (uint256[] memory)
    {
        uint256 tokenCount = balanceOf(_wallet);

        uint256[] memory tokensId = new uint256[](tokenCount);
        for (uint256 i; i < tokenCount; i++) {
            tokensId[i] = tokenOfOwnerByIndex(_wallet, i);
        }
        return tokensId;
    }

    /*

  ___   __    __  ____     ___  ____       _____  __ __  ____     __ ______  ____  ___   ____   _____
 /   \ |  |__|  ||    \   /  _]|    \     |     ||  |  ||    \   /  ]      ||    |/   \ |    \ / ___/
|     ||  |  |  ||  _  | /  [_ |  D  )    |   __||  |  ||  _  | /  /|      | |  ||     ||  _  (   \_ 
|  O  ||  |  |  ||  |  ||    _]|    /     |  |_  |  |  ||  |  |/  / |_|  |_| |  ||  O  ||  |  |\__  |
|     ||  `  '  ||  |  ||   [_ |    \     |   _] |  :  ||  |  /   \_  |  |   |  ||     ||  |  |/  \ |
|     | \      / |  |  ||     ||  .  \    |  |   |     ||  |  \     | |  |   |  ||     ||  |  |\    |
 \___/   \_/\_/  |__|__||_____||__|\_|    |__|    \__,_||__|__|\____| |__|  |____|\___/ |__|__| \___|
                                                                                                     


    */

    /**
     * @dev Clears the traits.
     */
    // function clearTraits() public onlyOwner {
    //     for (uint256 i = 0; i < 9; i++) {
    //         delete traitTypes[i];
    //     }
    // }

    /**
     * @dev Add a trait type
     * @param _traitTypeIndex The trait type index
     * @param traits Array of traits to add
     */

    function addTraitType(uint256 _traitTypeIndex, Trait[] memory traits)
        public
        onlyOwner
    {
        for (uint256 i = 0; i < traits.length; i++) {
            traitTypes[_traitTypeIndex].push(
                Trait(
                    traits[i].traitName,
                    traits[i].traitType,
                    traits[i].pixels,
                    traits[i].pixelCount
                )
            );
        }

        return;
    }

    /**
     * @dev Sets the miece ERC20 address
     * @param _mieceAddress The miece address
     */

    function setMieceAddress(address _mieceAddress) public onlyOwner {
        mieceAddress = _mieceAddress;
    }

    /**
     * @dev Transfers ownership
     * @param _newOwner The new owner
     */
    function transferOwnership(address _newOwner) public onlyOwner {
        _owner = _newOwner;
    }

    /**
     * @dev Modifier to only allow owner to call functions
     */
    modifier onlyOwner() {
        require(_owner == msg.sender);
        _;
    }
}

{
  "compilationTarget": {
    "Cats.sol": "Cats"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}