pragma solidity 0.6.12;
//
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
//
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
//
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
//
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
//
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
//
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
//
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
//
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
//
// LumosToken
contract LumosToken is ERC20("Lumos", "LMS"), Ownable {
/// @notice Creates `_amount` token to `_to`. Must only be called by the owner
function mint(address _to, uint256 _amount) public onlyOwner {
_mint(_to, _amount);
}
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
//
// computes square roots using the babylonian method
// https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method
library Babylonian {
function sqrt(uint y) internal pure returns (uint z) {
if (y > 3) {
z = y;
uint x = y / 2 + 1;
while (x < z) {
z = x;
x = (y / x + x) / 2;
}
} else if (y != 0) {
z = 1;
}
// else z = 0
}
}
//
// a library for handling binary fixed point numbers (https://en.wikipedia.org/wiki/Q_(number_format))
library FixedPoint {
// range: [0, 2**112 - 1]
// resolution: 1 / 2**112
struct uq112x112 {
uint224 _x;
}
// range: [0, 2**144 - 1]
// resolution: 1 / 2**112
struct uq144x112 {
uint _x;
}
uint8 private constant RESOLUTION = 112;
uint private constant Q112 = uint(1) << RESOLUTION;
uint private constant Q224 = Q112 << RESOLUTION;
// encode a uint112 as a UQ112x112
function encode(uint112 x) internal pure returns (uq112x112 memory) {
return uq112x112(uint224(x) << RESOLUTION);
}
// encodes a uint144 as a UQ144x112
function encode144(uint144 x) internal pure returns (uq144x112 memory) {
return uq144x112(uint256(x) << RESOLUTION);
}
// divide a UQ112x112 by a uint112, returning a UQ112x112
function div(uq112x112 memory self, uint112 x) internal pure returns (uq112x112 memory) {
require(x != 0, 'FixedPoint: DIV_BY_ZERO');
return uq112x112(self._x / uint224(x));
}
// multiply a UQ112x112 by a uint, returning a UQ144x112
// reverts on overflow
function mul(uq112x112 memory self, uint y) internal pure returns (uq144x112 memory) {
uint z;
require(y == 0 || (z = uint(self._x) * y) / y == uint(self._x), "FixedPoint: MULTIPLICATION_OVERFLOW");
return uq144x112(z);
}
// returns a UQ112x112 which represents the ratio of the numerator to the denominator
// equivalent to encode(numerator).div(denominator)
function fraction(uint112 numerator, uint112 denominator) internal pure returns (uq112x112 memory) {
require(denominator > 0, "FixedPoint: DIV_BY_ZERO");
return uq112x112((uint224(numerator) << RESOLUTION) / denominator);
}
// decode a UQ112x112 into a uint112 by truncating after the radix point
function decode(uq112x112 memory self) internal pure returns (uint112) {
return uint112(self._x >> RESOLUTION);
}
// decode a UQ144x112 into a uint144 by truncating after the radix point
function decode144(uq144x112 memory self) internal pure returns (uint144) {
return uint144(self._x >> RESOLUTION);
}
// take the reciprocal of a UQ112x112
function reciprocal(uq112x112 memory self) internal pure returns (uq112x112 memory) {
require(self._x != 0, 'FixedPoint: ZERO_RECIPROCAL');
return uq112x112(uint224(Q224 / self._x));
}
// square root of a UQ112x112
function sqrt(uq112x112 memory self) internal pure returns (uq112x112 memory) {
return uq112x112(uint224(Babylonian.sqrt(uint256(self._x)) << 56));
}
}
//
// library with helper methods for oracles that are concerned with computing average prices
library UniswapV2OracleLibrary {
using FixedPoint for *;
// helper function that returns the current block timestamp within the range of uint32, i.e. [0, 2**32 - 1]
function currentBlockTimestamp() internal view returns (uint32) {
return uint32(block.timestamp % 2 ** 32);
}
// produces the cumulative price using counterfactuals to save gas and avoid a call to sync.
function currentCumulativePrices(
address pair,
bool isToken0
) internal view returns (uint priceCumulative, uint32 blockTimestamp) {
blockTimestamp = currentBlockTimestamp();
(uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast) = IUniswapV2Pair(pair).getReserves();
if (isToken0) {
priceCumulative = IUniswapV2Pair(pair).price0CumulativeLast();
// if time has elapsed since the last update on the pair, mock the accumulated price values
if (blockTimestampLast != blockTimestamp) {
// subtraction overflow is desired
uint32 timeElapsed = blockTimestamp - blockTimestampLast;
// addition overflow is desired
// counterfactual
priceCumulative += uint(FixedPoint.fraction(reserve1, reserve0)._x) * timeElapsed;
}
} else {
priceCumulative = IUniswapV2Pair(pair).price1CumulativeLast();
// if time has elapsed since the last update on the pair, mock the accumulated price values
if (blockTimestampLast != blockTimestamp) {
// subtraction overflow is desired
uint32 timeElapsed = blockTimestamp - blockTimestampLast;
// addition overflow is desired
// counterfactual
priceCumulative += uint(FixedPoint.fraction(reserve1, reserve0)._x) * timeElapsed;
}
}
}
function getUniswapV2Pair(address _token0, address _token1) internal pure returns (address uni_pair, bool isToken0) {
(address token0, address token1) = UniswapV2OracleLibrary.sortTokens(
_token0,
_token1
);
//bool _isToken0;
// used for interacting with uniswap
if (token0 == _token0) {
isToken0 = true;
} else {
isToken0 = false;
}
uni_pair = UniswapV2OracleLibrary.pairFor(address(0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f), token0, token1);
return (uni_pair, isToken0);
}
/* - Constructor Helpers - */
// calculates the CREATE2 address for a pair without making any external calls
function pairFor(
address factory,
address token0,
address token1
) internal pure returns (address pair) {
pair = address(
uint256(
keccak256(
abi.encodePacked(
hex"ff",
factory,
keccak256(abi.encodePacked(token0, token1)),
hex"96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f" // init code hash
)
)
)
);
}
// returns sorted token addresses, used to handle return values from pairs sorted in this order
function sortTokens(address tokenA, address tokenB)
internal
pure
returns (address token0, address token1)
{
require(tokenA != tokenB, "UniswapV2Library: IDENTICAL_ADDRESSES");
(token0, token1) = tokenA < tokenB
? (tokenA, tokenB)
: (tokenB, tokenA);
require(token0 != address(0), "UniswapV2Library: ZERO_ADDRESS");
}
}
//
interface IMakerPriceFeed {
function read() external view returns (bytes32);
}
//
/// math.sol -- mixin for inline numerical wizardry
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
library DSMath {
function add(uint256 x, uint256 y) internal pure returns (uint256 z) {
require((z = x + y) >= x, "ds-math-add-overflow");
}
function sub(uint256 x, uint256 y) internal pure returns (uint256 z) {
require((z = x - y) <= x, "ds-math-sub-underflow");
}
function mul(uint256 x, uint256 y) internal pure returns (uint256 z) {
require(y == 0 || (z = x * y) / y == x, "ds-math-mul-overflow");
}
function div(uint256 x, uint256 y) internal pure returns (uint256 z) {
require(y > 0, "ds-math-division-by-zero");
return x / y;
}
function add(
uint256 x,
uint256 y,
string memory errorMessage
) internal pure returns (uint256 z) {
require((z = x + y) >= x, errorMessage);
}
function sub(
uint256 x,
uint256 y,
string memory errorMessage
) internal pure returns (uint256 z) {
require((z = x - y) <= x, errorMessage);
}
function mul(
uint256 x,
uint256 y,
string memory errorMessage
) internal pure returns (uint256 z) {
require(y == 0 || (z = x * y) / y == x, errorMessage);
}
function div(
uint256 x,
uint256 y,
string memory errorMessage
) internal pure returns (uint256 z) {
require(y > 0, errorMessage);
return x / y;
}
function min(uint256 x, uint256 y) internal pure returns (uint256 z) {
return x <= y ? x : y;
}
function max(uint256 x, uint256 y) internal pure returns (uint256 z) {
return x >= y ? x : y;
}
function imin(int256 x, int256 y) internal pure returns (int256 z) {
return x <= y ? x : y;
}
function imax(int256 x, int256 y) internal pure returns (int256 z) {
return x >= y ? x : y;
}
uint256 constant WAD = 10**18;
uint256 constant RAY = 10**27;
//rounds to zero if x*y < WAD / 2
function wmul(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = add(mul(x, y), WAD / 2) / WAD;
}
//rounds to zero if x*y < WAD / 2
function rmul(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = add(mul(x, y), RAY / 2) / RAY;
}
//rounds to zero if x*y < WAD / 2
function wdiv(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = add(mul(x, WAD), y / 2) / y;
}
/*
function wdivM(uint256 x, uint256 y) internal pure returns (uint256 z) {
x = toWAD18(x);
y = toWAD18(y);
z = add(mul(x, WAD), y / 2) / y;
}
*/
//rounds to zero if x*y < RAY / 2
function rdiv(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = add(mul(x, RAY), y / 2) / y;
}
function toWAD18(uint256 x) internal pure returns (uint256 z) {
z = mul(x, WAD);
}
function toRAY27(uint256 x) internal pure returns (uint256 z) {
z = mul(x, RAY);
}
// computes square roots using the babylonian method
// https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method
function sqrt(uint256 y) internal pure returns (uint256 z) {
if (y > 3) {
z = y;
uint256 x = y / 2 + 1;
while (x < z) {
z = x;
x = (y / x + x) / 2;
}
} else if (y != 0) {
z = 1;
}
// else z = 0
}
// This famous algorithm is called "exponentiation by squaring"
// and calculates x^n with x as fixed-point and n as regular unsigned.
//
// It's O(log n), instead of O(n) for naive repeated multiplication.
//
// These facts are why it works:
//
// If n is even, then x^n = (x^2)^(n/2).
// If n is odd, then x^n = x * x^(n-1),
// and applying the equation for even x gives
// x^n = x * (x^2)^((n-1) / 2).
//
// Also, EVM division is flooring and
// floor[(n-1) / 2] = floor[n / 2].
//
function rpow(uint256 x, uint256 n) internal pure returns (uint256 z) {
z = n % 2 != 0 ? x : RAY;
for (n /= 2; n != 0; n /= 2) {
x = rmul(x, x);
if (n % 2 != 0) {
z = rmul(z, x);
}
}
}
}
//
// Grand Master is the wisest and oldest Wizard of lumos. He now governs over LUMOS. He's wise and helpful so he lets adventurers
//craft LMS while they learn casting spells. He will guide you all in all fairness.
//
// Note that it's ownable and the owner wields tremendous power. The ownership
// will be transferred to a governance smart contract once the key ingredient LMS is sufficiently
// distributed and the community can show to govern itself in peace.
//
// Have fun reading it. Hopefully it's bug-free. May the magic be with you.
contract MasterWizard is Ownable {
using DSMath for uint;
using SafeERC20 for IERC20;
// Info of each adventurer.
struct UserInfo {
uint amount; // How many LP tokens the adventurer has provided.
uint rewardDebt; // Reward debt. See explanation below.
uint lastHarvestBlock;
uint totalHarvestReward;
//
// We do some fancy math here. Basically, any point in time, the amount of LMS
// entitled to an adventurer but is pending to be distributed is:
//
// pending reward = (user.amount * pool.accLumosPerShare) - user.rewardDebt
//
// Whenever an adventurer deposits or withdraws LP tokens to a pool. Here's what happens:
// 1. The pool's `accLumosPerShare` (and `lastRewardBlock`) gets updated.
// 2. Adventurer receives the pending reward sent to his/her address.
// 3. Adventurer's `amount` gets updated.
// 4. Adventurer's `rewardDebt` gets updated.
}
// Info of each pool.
struct PoolInfo {
IERC20 lpToken; // Address of LP token contract.
uint allocPoint; // How many allocation points assigned to this pool. LMS to distribute per block.
uint lastRewardBlock; // Last block number that LMS distribution occurs.
uint accLumosPerShare; // Accumulated LMS per share, times 1e6. See below.
}
// The LUMOS TOKEN!
LumosToken public lumos;
// Dev fund (2%, initially)
uint public devFundDivRate = 50 * 1e18; //Wizards casting spells while teaching so some LMS is created. These will be used wisely to develop Lumos.
// Dev address.
address public devaddr;
// LUMOS tokens created per block.
uint public lumosPerBlock;
// Info of each pool.
PoolInfo[] public poolInfo;
mapping(address => uint256) public poolId1; // poolId1 count from 1, subtraction 1 before using with poolInfo
// Info of each user that stakes LP tokens.
mapping(uint => mapping(address => UserInfo)) public userInfo;
// Total allocation points. Must be the sum of all allocation points in all pools.
uint public totalAllocPoint = 0;
// The block number when LMS mining starts.
uint public startBlock;
uint public endBlock;
//uint public endBlock;
uint public startBlockTime;
/// @notice pair for reserveToken <> LMS
address public uniswap_pair;
/// @notice last TWAP update time
uint public blockTimestampLast;
/// @notice last TWAP cumulative price;
uint public priceCumulativeLast;
/// @notice Whether or not this token is first in uniswap LMS<>Reserve pair
bool public isToken0;
uint public lmsPriceMultiplier;
uint public minLMSTWAPIntervalSec;
address public makerEthPriceFeed;
uint public timeOfInitTWAP;
//bool public testMode;
bool public craftingEnded;
// Events
event Recovered(address token, uint amount);
event Deposit(address indexed user, uint indexed pid, uint amount);
event Withdraw(address indexed user, uint indexed pid, uint amount);
event EmergencyWithdraw(
address indexed user,
uint indexed pid,
uint amount
);
constructor(
LumosToken _lumos,
address reserveToken_,//WETH
address _devaddr
//,bool _testMode
) public {
lumos = _lumos;
devaddr = _devaddr;
//startBlock = _startBlock;
(address _uniswap_pair, bool _isToken0) = UniswapV2OracleLibrary.getUniswapV2Pair(address(lumos),reserveToken_);
uniswap_pair = _uniswap_pair;
isToken0 = _isToken0;
makerEthPriceFeed = 0x729D19f657BD0614b4985Cf1D82531c67569197B;
/*
testMode = _testMode;
if(testMode == true) {
minLMSTWAPIntervalSec = 1 minutes;
}
else {
*/
minLMSTWAPIntervalSec = 24 hours;
// }
//init_TWAP();
}
function poolLength() external view returns (uint) {
return poolInfo.length;
}
function start_crafting() external onlyOwner {
require(startBlock > 0 && block.number > startBlock, "not this time.!");
require(startBlockTime == 0, "crafting already started.!");
startBlockTime = block.timestamp;
lumosPerBlock = getLumosPerBlock();
lmsPriceMultiplier = 1e18;
massUpdatePools();
}
function end_crafting() external
{
require(startBlockTime > 0, "crafting not started.!");
if(lumos.totalSupply() > (1e18 * 2000000)) {
massUpdatePools();
craftingEnded = true;
endBlock = block.number;
}
}
function init_TWAP() public onlyOwner {
require(timeOfInitTWAP == 0,"already initialized.!");
(uint priceCumulative, uint32 blockTimestamp) = UniswapV2OracleLibrary.currentCumulativePrices(uniswap_pair, isToken0);
require(blockTimestamp > 0, "no trades");
blockTimestampLast = blockTimestamp;
priceCumulativeLast = priceCumulative;
timeOfInitTWAP = blockTimestamp;
}
// Add a new lp to the pool. Can only be called by the owner.
function add(
uint _allocPoint,
IERC20 _lpToken,
bool _withUpdate
) public onlyOwner {
require(poolId1[address(_lpToken)] == 0, "add: lp is already in pool");
if (_withUpdate) {
massUpdatePools();
}
_allocPoint = _allocPoint.toWAD18();
uint lastRewardBlock = block.number > startBlock
? block.number
: startBlock;
totalAllocPoint = totalAllocPoint.add(_allocPoint);
poolId1[address(_lpToken)] = poolInfo.length + 1;
poolInfo.push(
PoolInfo({
lpToken: _lpToken,
allocPoint: _allocPoint,
lastRewardBlock: lastRewardBlock,
accLumosPerShare: 0
})
);
}
// Update the given pool's LMS allocation point. Can only be called by the owner.
function set(
uint _pid,
uint _allocPoint,
bool _withUpdate
) public onlyOwner {
if (_withUpdate) {
massUpdatePools();
}
_allocPoint = _allocPoint.toWAD18();
totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(
_allocPoint
);
poolInfo[_pid].allocPoint = _allocPoint;
}
//Updates the price of LMS token
function getTWAP() private returns (uint) {
(uint priceCumulative,uint blockTimestamp) = UniswapV2OracleLibrary.currentCumulativePrices(uniswap_pair, isToken0);
uint timeElapsed = blockTimestamp - blockTimestampLast; // overflow is desired
// overflow is desired, casting never truncates
// cumulative price is in (uq112x112 price * seconds) units so we simply wrap it after division by time elapsed
FixedPoint.uq112x112 memory priceAverage = FixedPoint.uq112x112(
uint224((priceCumulative - priceCumulativeLast) / timeElapsed)
);
priceCumulativeLast = priceCumulative;
blockTimestampLast = blockTimestamp;
return FixedPoint.decode144(FixedPoint.mul(priceAverage, 10**18));
}
function getCurrentTWAP() public view returns (uint) {
(uint priceCumulative,uint blockTimestamp) = UniswapV2OracleLibrary.currentCumulativePrices(uniswap_pair, isToken0);
uint timeElapsed = blockTimestamp - blockTimestampLast; // overflow is desired
// overflow is desired, casting never truncates
// cumulative price is in (uq112x112 price * seconds) units so we simply wrap it after division by time elapsed
FixedPoint.uq112x112 memory priceAverage = FixedPoint.uq112x112(
uint224((priceCumulative - priceCumulativeLast) / timeElapsed)
);
return FixedPoint.decode144(FixedPoint.mul(priceAverage, 10**18));
}
//Updates the ETHUSD price to calculate LMS price in USD.
function getETHUSDPrice() public view returns(uint) {
/*if(testMode){
return 384.2e18;
}*/
return uint(IMakerPriceFeed(makerEthPriceFeed).read());
}
// Return reward multiplier over the given _from to _to block.
function getMultiplier(uint _from, uint _to) private view returns (uint) {
//require(startBlockTime > 0, "farming not activated yet.!");
uint _blockCount = _to.sub(_from);
return lumosPerBlock.wmul(lmsPriceMultiplier).mul(_blockCount);//.wdiv(1 ether);
}
// View function to see pending LMS on frontend.
function pendingLumos(uint _pid, address _user)
external
view
returns (uint)
{
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][_user];
uint accLumosPerShare = pool.accLumosPerShare;
uint lpSupply = pool.lpToken.balanceOf(address(this));
if (block.number > pool.lastRewardBlock && lpSupply != 0 && craftingEnded == false) {
uint multiplier = getMultiplier(
pool.lastRewardBlock,
block.number
);
uint lumosReward = multiplier
//.mul(lumosPerBlock)
.wmul(pool.allocPoint)
.wdiv(totalAllocPoint);
//.wdiv(1e18);
accLumosPerShare = accLumosPerShare.add(
lumosReward
.mul(1e6)
.wdiv(lpSupply)
);
}
return user.amount.wmul(accLumosPerShare)
.div(1e6)
.sub(user.rewardDebt);
}
// Update reward vairables for all pools. Be careful of gas spending!
function massUpdatePools() public {
uint length = poolInfo.length;
for (uint pid = 0; pid < length; ++pid) {
updatePool(pid);
}
}
// Update reward variables of the given pool to be up-to-date.
function updatePool(uint _pid) public {
if(startBlock == 0) {
return;
}
PoolInfo storage pool = poolInfo[_pid];
if (block.number <= pool.lastRewardBlock) {
return;
}
uint lpSupply = pool.lpToken.balanceOf(address(this));
if (lpSupply == 0) {
pool.lastRewardBlock = block.number;
return;
}
if(craftingEnded){
return;
}
uint multiplier = getMultiplier(pool.lastRewardBlock, block.number);
uint lmsReward = multiplier
//.mul(lumosPerBlock)
.wmul(pool.allocPoint)
.wdiv(totalAllocPoint);
//.wdiv(1e18);
lumos.mint(devaddr, lmsReward.wdiv(devFundDivRate));
lumos.mint(address(this), lmsReward);
pool.accLumosPerShare = pool.accLumosPerShare.add(
lmsReward
.mul(1e6)
.wdiv(lpSupply)
);
pool.lastRewardBlock = block.number;
}
// Deposit LP tokens to MasterWizard for LMS allocation.
function deposit(uint _pid, uint _amount) public {
require(startBlockTime > 0, "crafting not activated yet.!");
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][msg.sender];
updatePool(_pid);
if (user.amount > 0) {
uint pending = user
.amount
.wmul(pool.accLumosPerShare)
.div(1e6)
.sub(user.rewardDebt);
if (pending > 0) {
uint _harvestMultiplier = getLumosHarvestMultiplier(
user.lastHarvestBlock
);
uint _harvestBonus = pending.wmul(_harvestMultiplier);
// With magic, Grand Master rewards adventurer if she chooses to let their rewards stays in the Crafting Pool.
if (_harvestBonus > 1e18) {
lumos.mint(msg.sender, _harvestBonus);
user.totalHarvestReward = user.totalHarvestReward.add(
_harvestBonus
);
}
safeLMSTransfer(msg.sender, pending);
}
}
if (_amount > 0) {
pool.lpToken.safeTransferFrom(
address(msg.sender),
address(this),
_amount
);
user.amount = user.amount.add(_amount);
}
user.lastHarvestBlock = block.number;
user.rewardDebt = user.amount.wmul(pool.accLumosPerShare).div(1e6);
emit Deposit(msg.sender, _pid, _amount);
}
// Withdraw LP tokens from MasterWizard.
function withdraw(uint _pid, uint _amount) public {
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][msg.sender];
require(user.amount >= _amount, "withdraw: not good");
updatePool(_pid);
uint pending = user.amount.wmul(pool.accLumosPerShare)
.div(1e6)
.sub(user.rewardDebt);
if (pending > 0) {
safeLMSTransfer(msg.sender, pending);
}
if (_amount > 0) {
user.amount = user.amount.sub(_amount);
pool.lpToken.safeTransfer(address(msg.sender), _amount);
}
user.rewardDebt = user.amount.wmul(pool.accLumosPerShare).div(1e6);
user.lastHarvestBlock = block.number;
emit Withdraw(msg.sender, _pid, _amount);
}
// Withdraw without caring about rewards. EMERGENCY ONLY.
function emergencyWithdraw(uint _pid) public {
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][msg.sender];
pool.lpToken.safeTransfer(address(msg.sender), user.amount);
emit EmergencyWithdraw(msg.sender, _pid, user.amount);
user.amount = 0;
user.rewardDebt = 0;
user.lastHarvestBlock = block.number;
// user.withdrawalCount++;
}
// Safe lumos transfer function, just in case if rounding error causes pool to not have enough LMS.
function safeLMSTransfer(address _to, uint _amount) private {
uint lmsBalance = lumos.balanceOf(address(this));
if (_amount > lmsBalance) {
lumos.transfer(_to, lmsBalance);
} else {
lumos.transfer(_to, _amount);
}
}
// Update dev address by the previous dev.
//function dev(address _devaddr) public {
// require(msg.sender == devaddr, "dev: wut?");
// devaddr = _devaddr;
//}
/*
function setStartBlockTime(uint _startBlockTime) external {
require(testMode, "testing or not ?");
startBlockTime = _startBlockTime;
}
*/
function setLumosPerBlock() external {
require(startBlockTime > 0, "crafting not activated yet.!");
uint _lumosPerBlock = getLumosPerBlock();
if(_lumosPerBlock != lumosPerBlock){
massUpdatePools();
lumosPerBlock = _lumosPerBlock;
}
}
/*
function getLumosTotalSupply() external view returns(uint) {
require(testMode, "testing or not ?");
return lumos.totalSupply();
}
*/
// Community casting this spell every day and decides the daily bonus multiplier for the next day. This spell can be cast only once in every day.
function setLMSPriceMultiplier() external {
require(startBlockTime > 0 && blockTimestampLast.add(minLMSTWAPIntervalSec) < now, "not this time.!");
require(timeOfInitTWAP > 0, "crafting not initialized.!");
require(craftingEnded == false, "crafting ended :(");
massUpdatePools();
setLMSPriceMultiplierInt();
}
function getCurrentPriceMultiplier() external view returns(uint){
uint _lmsPriceETH = getCurrentTWAP();
uint _ethPriceUSD = getETHUSDPrice();
uint _price = _lmsPriceETH.wmul(_ethPriceUSD);
if (_price < 3e18)
return 1e18;
else if (_price >= 3e18 && _price < 5e18)
return 2e18;
else if (_price >= 5e18 && _price < 8e18)
return 3e18;
else return 4e18;
}
function setLMSPriceMultiplierInt() private {
if(startBlockTime == 0 || blockTimestampLast.add(minLMSTWAPIntervalSec) > now || timeOfInitTWAP == 0 || craftingEnded == true) {
return;
}
uint _lmsPriceETH = getTWAP();
uint _ethPriceUSD = getETHUSDPrice();
uint _price = _lmsPriceETH.wmul(_ethPriceUSD);
if (_price < 3e18)
lmsPriceMultiplier = 1e18;
else if (_price >= 3e18 && _price < 5e18)
lmsPriceMultiplier = 2e18;
else if (_price >= 5e18 && _price < 8e18)
lmsPriceMultiplier = 3e18;
else lmsPriceMultiplier = 4e18;
lumosPerBlock = getLumosPerBlock();
}
// lumos per block multiplier
function getLumosPerBlock() private view returns (uint) {
uint elapsedDays = ((now - startBlockTime).div(86400) + 1) * 1e6;
return elapsedDays.sqrt().wdiv(6363);
}
// harvest multiplier
function getLumosHarvestMultiplier(uint _lastHarvestBlock) private view returns (uint) {
return
(block.number - _lastHarvestBlock).wdiv(67000).min(1e18);
}
function setStartBlock(uint _startBlock) external onlyOwner {
require(startBlock == 0 && _startBlock > 0, " startBlock > 0 ?");
startBlock = _startBlock;
}
function setDevFundDivRate(uint _devFundDivRate) external onlyOwner {
require(_devFundDivRate > 0, "dev fund rate 0 ?");
devFundDivRate = _devFundDivRate;
}
function setminLMSTWAPIntervalSec(uint _interval) external onlyOwner {
require(_interval > 0, "minLMSTWAPIntervalSec 0 ?");
minLMSTWAPIntervalSec = _interval;
}
}
{
"compilationTarget": {
"MasterWizard.sol": "MasterWizard"
},
"evmVersion": "istanbul",
"libraries": {},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": true,
"runs": 200
},
"remappings": []
}
[{"inputs":[{"internalType":"contract LumosToken","name":"_lumos","type":"address"},{"internalType":"address","name":"reserveToken_","type":"address"},{"internalType":"address","name":"_devaddr","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EmergencyWithdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Recovered","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"contract IERC20","name":"_lpToken","type":"address"},{"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"add","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"blockTimestampLast","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"craftingEnded","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"devFundDivRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"devaddr","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"emergencyWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"endBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"end_crafting","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getCurrentPriceMultiplier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getCurrentTWAP","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getETHUSDPrice","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"init_TWAP","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"isToken0","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lmsPriceMultiplier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lumos","outputs":[{"internalType":"contract LumosToken","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lumosPerBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"makerEthPriceFeed","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"massUpdatePools","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"minLMSTWAPIntervalSec","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"address","name":"_user","type":"address"}],"name":"pendingLumos","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"poolId1","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"poolInfo","outputs":[{"internalType":"contract IERC20","name":"lpToken","type":"address"},{"internalType":"uint256","name":"allocPoint","type":"uint256"},{"internalType":"uint256","name":"lastRewardBlock","type":"uint256"},{"internalType":"uint256","name":"accLumosPerShare","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolLength","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"priceCumulativeLast","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"set","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_devFundDivRate","type":"uint256"}],"name":"setDevFundDivRate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"setLMSPriceMultiplier","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"setLumosPerBlock","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_startBlock","type":"uint256"}],"name":"setStartBlock","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_interval","type":"uint256"}],"name":"setminLMSTWAPIntervalSec","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"startBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"startBlockTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"start_crafting","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"timeOfInitTWAP","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAllocPoint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"uniswap_pair","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"updatePool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"address","name":"","type":"address"}],"name":"userInfo","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"rewardDebt","type":"uint256"},{"internalType":"uint256","name":"lastHarvestBlock","type":"uint256"},{"internalType":"uint256","name":"totalHarvestReward","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]