// SPDX-License-Identifier: MIT
// File: operator-filter-registry/src/lib/Constants.sol
pragma solidity ^0.8.13;
address constant CANONICAL_OPERATOR_FILTER_REGISTRY_ADDRESS = 0x000000000000AAeB6D7670E522A718067333cd4E;
address constant CANONICAL_CORI_SUBSCRIPTION = 0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6;
// File: operator-filter-registry/src/IOperatorFilterRegistry.sol
pragma solidity ^0.8.13;
interface IOperatorFilterRegistry {
/**
* @notice Returns true if operator is not filtered for a given token, either by address or codeHash. Also returns
* true if supplied registrant address is not registered.
*/
function isOperatorAllowed(address registrant, address operator) external view returns (bool);
/**
* @notice Registers an address with the registry. May be called by address itself or by EIP-173 owner.
*/
function register(address registrant) external;
/**
* @notice Registers an address with the registry and "subscribes" to another address's filtered operators and codeHashes.
*/
function registerAndSubscribe(address registrant, address subscription) external;
/**
* @notice Registers an address with the registry and copies the filtered operators and codeHashes from another
* address without subscribing.
*/
function registerAndCopyEntries(address registrant, address registrantToCopy) external;
/**
* @notice Unregisters an address with the registry and removes its subscription. May be called by address itself or by EIP-173 owner.
* Note that this does not remove any filtered addresses or codeHashes.
* Also note that any subscriptions to this registrant will still be active and follow the existing filtered addresses and codehashes.
*/
function unregister(address addr) external;
/**
* @notice Update an operator address for a registered address - when filtered is true, the operator is filtered.
*/
function updateOperator(address registrant, address operator, bool filtered) external;
/**
* @notice Update multiple operators for a registered address - when filtered is true, the operators will be filtered. Reverts on duplicates.
*/
function updateOperators(address registrant, address[] calldata operators, bool filtered) external;
/**
* @notice Update a codeHash for a registered address - when filtered is true, the codeHash is filtered.
*/
function updateCodeHash(address registrant, bytes32 codehash, bool filtered) external;
/**
* @notice Update multiple codeHashes for a registered address - when filtered is true, the codeHashes will be filtered. Reverts on duplicates.
*/
function updateCodeHashes(address registrant, bytes32[] calldata codeHashes, bool filtered) external;
/**
* @notice Subscribe an address to another registrant's filtered operators and codeHashes. Will remove previous
* subscription if present.
* Note that accounts with subscriptions may go on to subscribe to other accounts - in this case,
* subscriptions will not be forwarded. Instead the former subscription's existing entries will still be
* used.
*/
function subscribe(address registrant, address registrantToSubscribe) external;
/**
* @notice Unsubscribe an address from its current subscribed registrant, and optionally copy its filtered operators and codeHashes.
*/
function unsubscribe(address registrant, bool copyExistingEntries) external;
/**
* @notice Get the subscription address of a given registrant, if any.
*/
function subscriptionOf(address addr) external returns (address registrant);
/**
* @notice Get the set of addresses subscribed to a given registrant.
* Note that order is not guaranteed as updates are made.
*/
function subscribers(address registrant) external returns (address[] memory);
/**
* @notice Get the subscriber at a given index in the set of addresses subscribed to a given registrant.
* Note that order is not guaranteed as updates are made.
*/
function subscriberAt(address registrant, uint256 index) external returns (address);
/**
* @notice Copy filtered operators and codeHashes from a different registrantToCopy to addr.
*/
function copyEntriesOf(address registrant, address registrantToCopy) external;
/**
* @notice Returns true if operator is filtered by a given address or its subscription.
*/
function isOperatorFiltered(address registrant, address operator) external returns (bool);
/**
* @notice Returns true if the hash of an address's code is filtered by a given address or its subscription.
*/
function isCodeHashOfFiltered(address registrant, address operatorWithCode) external returns (bool);
/**
* @notice Returns true if a codeHash is filtered by a given address or its subscription.
*/
function isCodeHashFiltered(address registrant, bytes32 codeHash) external returns (bool);
/**
* @notice Returns a list of filtered operators for a given address or its subscription.
*/
function filteredOperators(address addr) external returns (address[] memory);
/**
* @notice Returns the set of filtered codeHashes for a given address or its subscription.
* Note that order is not guaranteed as updates are made.
*/
function filteredCodeHashes(address addr) external returns (bytes32[] memory);
/**
* @notice Returns the filtered operator at the given index of the set of filtered operators for a given address or
* its subscription.
* Note that order is not guaranteed as updates are made.
*/
function filteredOperatorAt(address registrant, uint256 index) external returns (address);
/**
* @notice Returns the filtered codeHash at the given index of the list of filtered codeHashes for a given address or
* its subscription.
* Note that order is not guaranteed as updates are made.
*/
function filteredCodeHashAt(address registrant, uint256 index) external returns (bytes32);
/**
* @notice Returns true if an address has registered
*/
function isRegistered(address addr) external returns (bool);
/**
* @dev Convenience method to compute the code hash of an arbitrary contract
*/
function codeHashOf(address addr) external returns (bytes32);
}
// File: operator-filter-registry/src/OperatorFilterer.sol
pragma solidity ^0.8.13;
/**
* @title OperatorFilterer
* @notice Abstract contract whose constructor automatically registers and optionally subscribes to or copies another
* registrant's entries in the OperatorFilterRegistry.
* @dev This smart contract is meant to be inherited by token contracts so they can use the following:
* - `onlyAllowedOperator` modifier for `transferFrom` and `safeTransferFrom` methods.
* - `onlyAllowedOperatorApproval` modifier for `approve` and `setApprovalForAll` methods.
* Please note that if your token contract does not provide an owner with EIP-173, it must provide
* administration methods on the contract itself to interact with the registry otherwise the subscription
* will be locked to the options set during construction.
*/
abstract contract OperatorFilterer {
/// @dev Emitted when an operator is not allowed.
error OperatorNotAllowed(address operator);
IOperatorFilterRegistry public constant OPERATOR_FILTER_REGISTRY =
IOperatorFilterRegistry(CANONICAL_OPERATOR_FILTER_REGISTRY_ADDRESS);
/// @dev The constructor that is called when the contract is being deployed.
constructor(address subscriptionOrRegistrantToCopy, bool subscribe) {
// If an inheriting token contract is deployed to a network without the registry deployed, the modifier
// will not revert, but the contract will need to be registered with the registry once it is deployed in
// order for the modifier to filter addresses.
if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {
if (subscribe) {
OPERATOR_FILTER_REGISTRY.registerAndSubscribe(address(this), subscriptionOrRegistrantToCopy);
} else {
if (subscriptionOrRegistrantToCopy != address(0)) {
OPERATOR_FILTER_REGISTRY.registerAndCopyEntries(address(this), subscriptionOrRegistrantToCopy);
} else {
OPERATOR_FILTER_REGISTRY.register(address(this));
}
}
}
}
/**
* @dev A helper function to check if an operator is allowed.
*/
modifier onlyAllowedOperator(address from) virtual {
// Allow spending tokens from addresses with balance
// Note that this still allows listings and marketplaces with escrow to transfer tokens if transferred
// from an EOA.
if (from != msg.sender) {
_checkFilterOperator(msg.sender);
}
_;
}
/**
* @dev A helper function to check if an operator approval is allowed.
*/
modifier onlyAllowedOperatorApproval(address operator) virtual {
_checkFilterOperator(operator);
_;
}
/**
* @dev A helper function to check if an operator is allowed.
*/
function _checkFilterOperator(address operator) internal view virtual {
// Check registry code length to facilitate testing in environments without a deployed registry.
if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {
// under normal circumstances, this function will revert rather than return false, but inheriting contracts
// may specify their own OperatorFilterRegistry implementations, which may behave differently
if (!OPERATOR_FILTER_REGISTRY.isOperatorAllowed(address(this), operator)) {
revert OperatorNotAllowed(operator);
}
}
}
}
// File: operator-filter-registry/src/DefaultOperatorFilterer.sol
pragma solidity ^0.8.13;
/**
* @title DefaultOperatorFilterer
* @notice Inherits from OperatorFilterer and automatically subscribes to the default OpenSea subscription.
* @dev Please note that if your token contract does not provide an owner with EIP-173, it must provide
* administration methods on the contract itself to interact with the registry otherwise the subscription
* will be locked to the options set during construction.
*/
abstract contract DefaultOperatorFilterer is OperatorFilterer {
/// @dev The constructor that is called when the contract is being deployed.
constructor() OperatorFilterer(CANONICAL_CORI_SUBSCRIPTION, true) {}
}
// File: @openzeppelin/contracts/security/ReentrancyGuard.sol
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File: seadrop-main/src/lib/SeaDropStructs.sol
pragma solidity ^0.8.17;
/**
* @notice A struct defining public drop data.
* Designed to fit efficiently in one storage slot.
*
* @param mintPrice The mint price per token. (Up to 1.2m
* of native token, e.g. ETH, MATIC)
* @param startTime The start time, ensure this is not zero.
* @param endTIme The end time, ensure this is not zero.
* @param maxTotalMintableByWallet Maximum total number of mints a user is
* allowed. (The limit for this field is
* 2^16 - 1)
* @param feeBps Fee out of 10_000 basis points to be
* collected.
* @param restrictFeeRecipients If false, allow any fee recipient;
* if true, check fee recipient is allowed.
*/
struct PublicDrop {
uint80 mintPrice; // 80/256 bits
uint48 startTime; // 128/256 bits
uint48 endTime; // 176/256 bits
uint16 maxTotalMintableByWallet; // 224/256 bits
uint16 feeBps; // 240/256 bits
bool restrictFeeRecipients; // 248/256 bits
}
/**
* @notice A struct defining token gated drop stage data.
* Designed to fit efficiently in one storage slot.
*
* @param mintPrice The mint price per token. (Up to 1.2m
* of native token, e.g.: ETH, MATIC)
* @param maxTotalMintableByWallet Maximum total number of mints a user is
* allowed. (The limit for this field is
* 2^16 - 1)
* @param startTime The start time, ensure this is not zero.
* @param endTime The end time, ensure this is not zero.
* @param dropStageIndex The drop stage index to emit with the event
* for analytical purposes. This should be
* non-zero since the public mint emits
* with index zero.
* @param maxTokenSupplyForStage The limit of token supply this stage can
* mint within. (The limit for this field is
* 2^16 - 1)
* @param feeBps Fee out of 10_000 basis points to be
* collected.
* @param restrictFeeRecipients If false, allow any fee recipient;
* if true, check fee recipient is allowed.
*/
struct TokenGatedDropStage {
uint80 mintPrice; // 80/256 bits
uint16 maxTotalMintableByWallet; // 96/256 bits
uint48 startTime; // 144/256 bits
uint48 endTime; // 192/256 bits
uint8 dropStageIndex; // non-zero. 200/256 bits
uint32 maxTokenSupplyForStage; // 232/256 bits
uint16 feeBps; // 248/256 bits
bool restrictFeeRecipients; // 256/256 bits
}
/**
* @notice A struct defining mint params for an allow list.
* An allow list leaf will be composed of `msg.sender` and
* the following params.
*
* Note: Since feeBps is encoded in the leaf, backend should ensure
* that feeBps is acceptable before generating a proof.
*
* @param mintPrice The mint price per token.
* @param maxTotalMintableByWallet Maximum total number of mints a user is
* allowed.
* @param startTime The start time, ensure this is not zero.
* @param endTime The end time, ensure this is not zero.
* @param dropStageIndex The drop stage index to emit with the event
* for analytical purposes. This should be
* non-zero since the public mint emits with
* index zero.
* @param maxTokenSupplyForStage The limit of token supply this stage can
* mint within.
* @param feeBps Fee out of 10_000 basis points to be
* collected.
* @param restrictFeeRecipients If false, allow any fee recipient;
* if true, check fee recipient is allowed.
*/
struct MintParams {
uint256 mintPrice;
uint256 maxTotalMintableByWallet;
uint256 startTime;
uint256 endTime;
uint256 dropStageIndex; // non-zero
uint256 maxTokenSupplyForStage;
uint256 feeBps;
bool restrictFeeRecipients;
}
/**
* @notice A struct defining token gated mint params.
*
* @param allowedNftToken The allowed nft token contract address.
* @param allowedNftTokenIds The token ids to redeem.
*/
struct TokenGatedMintParams {
address allowedNftToken;
uint256[] allowedNftTokenIds;
}
/**
* @notice A struct defining allow list data (for minting an allow list).
*
* @param merkleRoot The merkle root for the allow list.
* @param publicKeyURIs If the allowListURI is encrypted, a list of URIs
* pointing to the public keys. Empty if unencrypted.
* @param allowListURI The URI for the allow list.
*/
struct AllowListData {
bytes32 merkleRoot;
string[] publicKeyURIs;
string allowListURI;
}
/**
* @notice A struct defining minimum and maximum parameters to validate for
* signed mints, to minimize negative effects of a compromised signer.
*
* @param minMintPrice The minimum mint price allowed.
* @param maxMaxTotalMintableByWallet The maximum total number of mints allowed
* by a wallet.
* @param minStartTime The minimum start time allowed.
* @param maxEndTime The maximum end time allowed.
* @param maxMaxTokenSupplyForStage The maximum token supply allowed.
* @param minFeeBps The minimum fee allowed.
* @param maxFeeBps The maximum fee allowed.
*/
struct SignedMintValidationParams {
uint80 minMintPrice; // 80/256 bits
uint24 maxMaxTotalMintableByWallet; // 104/256 bits
uint40 minStartTime; // 144/256 bits
uint40 maxEndTime; // 184/256 bits
uint40 maxMaxTokenSupplyForStage; // 224/256 bits
uint16 minFeeBps; // 240/256 bits
uint16 maxFeeBps; // 256/256 bits
}
// File: seadrop-main/src/lib/ERC721SeaDropStructsErrorsAndEvents.sol
pragma solidity ^0.8.17;
interface ERC721SeaDropStructsErrorsAndEvents {
/**
* @notice Revert with an error if mint exceeds the max supply.
*/
error MintQuantityExceedsMaxSupply(uint256 total, uint256 maxSupply);
/**
* @notice Revert with an error if the number of token gated
* allowedNftTokens doesn't match the length of supplied
* drop stages.
*/
error TokenGatedMismatch();
/**
* @notice Revert with an error if the number of signers doesn't match
* the length of supplied signedMintValidationParams
*/
error SignersMismatch();
/**
* @notice An event to signify that a SeaDrop token contract was deployed.
*/
event SeaDropTokenDeployed();
/**
* @notice A struct to configure multiple contract options at a time.
*/
struct MultiConfigureStruct {
uint256 maxSupply;
string baseURI;
string contractURI;
address seaDropImpl;
PublicDrop publicDrop;
string dropURI;
AllowListData allowListData;
address creatorPayoutAddress;
bytes32 provenanceHash;
address[] allowedFeeRecipients;
address[] disallowedFeeRecipients;
address[] allowedPayers;
address[] disallowedPayers;
// Token-gated
address[] tokenGatedAllowedNftTokens;
TokenGatedDropStage[] tokenGatedDropStages;
address[] disallowedTokenGatedAllowedNftTokens;
// Server-signed
address[] signers;
SignedMintValidationParams[] signedMintValidationParams;
address[] disallowedSigners;
}
}
// File: seadrop-main/src/lib/SeaDropErrorsAndEvents.sol
pragma solidity ^0.8.17;
interface SeaDropErrorsAndEvents {
/**
* @dev Revert with an error if the drop stage is not active.
*/
error NotActive(
uint256 currentTimestamp,
uint256 startTimestamp,
uint256 endTimestamp
);
/**
* @dev Revert with an error if the mint quantity is zero.
*/
error MintQuantityCannotBeZero();
/**
* @dev Revert with an error if the mint quantity exceeds the max allowed
* to be minted per wallet.
*/
error MintQuantityExceedsMaxMintedPerWallet(uint256 total, uint256 allowed);
/**
* @dev Revert with an error if the mint quantity exceeds the max token
* supply.
*/
error MintQuantityExceedsMaxSupply(uint256 total, uint256 maxSupply);
/**
* @dev Revert with an error if the mint quantity exceeds the max token
* supply for the stage.
* Note: The `maxTokenSupplyForStage` for public mint is
* always `type(uint).max`.
*/
error MintQuantityExceedsMaxTokenSupplyForStage(
uint256 total,
uint256 maxTokenSupplyForStage
);
/**
* @dev Revert if the fee recipient is the zero address.
*/
error FeeRecipientCannotBeZeroAddress();
/**
* @dev Revert if the fee recipient is not already included.
*/
error FeeRecipientNotPresent();
/**
* @dev Revert if the fee basis points is greater than 10_000.
*/
error InvalidFeeBps(uint256 feeBps);
/**
* @dev Revert if the fee recipient is already included.
*/
error DuplicateFeeRecipient();
/**
* @dev Revert if the fee recipient is restricted and not allowed.
*/
error FeeRecipientNotAllowed();
/**
* @dev Revert if the creator payout address is the zero address.
*/
error CreatorPayoutAddressCannotBeZeroAddress();
/**
* @dev Revert with an error if the received payment is incorrect.
*/
error IncorrectPayment(uint256 got, uint256 want);
/**
* @dev Revert with an error if the allow list proof is invalid.
*/
error InvalidProof();
/**
* @dev Revert if a supplied signer address is the zero address.
*/
error SignerCannotBeZeroAddress();
/**
* @dev Revert with an error if signer's signature is invalid.
*/
error InvalidSignature(address recoveredSigner);
/**
* @dev Revert with an error if a signer is not included in
* the enumeration when removing.
*/
error SignerNotPresent();
/**
* @dev Revert with an error if a payer is not included in
* the enumeration when removing.
*/
error PayerNotPresent();
/**
* @dev Revert with an error if a payer is already included in mapping
* when adding.
* Note: only applies when adding a single payer, as duplicates in
* enumeration can be removed with updatePayer.
*/
error DuplicatePayer();
/**
* @dev Revert with an error if the payer is not allowed. The minter must
* pay for their own mint.
*/
error PayerNotAllowed();
/**
* @dev Revert if a supplied payer address is the zero address.
*/
error PayerCannotBeZeroAddress();
/**
* @dev Revert with an error if the sender does not
* match the INonFungibleSeaDropToken interface.
*/
error OnlyINonFungibleSeaDropToken(address sender);
/**
* @dev Revert with an error if the sender of a token gated supplied
* drop stage redeem is not the owner of the token.
*/
error TokenGatedNotTokenOwner(
address nftContract,
address allowedNftToken,
uint256 allowedNftTokenId
);
/**
* @dev Revert with an error if the token id has already been used to
* redeem a token gated drop stage.
*/
error TokenGatedTokenIdAlreadyRedeemed(
address nftContract,
address allowedNftToken,
uint256 allowedNftTokenId
);
/**
* @dev Revert with an error if an empty TokenGatedDropStage is provided
* for an already-empty TokenGatedDropStage.
*/
error TokenGatedDropStageNotPresent();
/**
* @dev Revert with an error if an allowedNftToken is set to
* the zero address.
*/
error TokenGatedDropAllowedNftTokenCannotBeZeroAddress();
/**
* @dev Revert with an error if an allowedNftToken is set to
* the drop token itself.
*/
error TokenGatedDropAllowedNftTokenCannotBeDropToken();
/**
* @dev Revert with an error if supplied signed mint price is less than
* the minimum specified.
*/
error InvalidSignedMintPrice(uint256 got, uint256 minimum);
/**
* @dev Revert with an error if supplied signed maxTotalMintableByWallet
* is greater than the maximum specified.
*/
error InvalidSignedMaxTotalMintableByWallet(uint256 got, uint256 maximum);
/**
* @dev Revert with an error if supplied signed start time is less than
* the minimum specified.
*/
error InvalidSignedStartTime(uint256 got, uint256 minimum);
/**
* @dev Revert with an error if supplied signed end time is greater than
* the maximum specified.
*/
error InvalidSignedEndTime(uint256 got, uint256 maximum);
/**
* @dev Revert with an error if supplied signed maxTokenSupplyForStage
* is greater than the maximum specified.
*/
error InvalidSignedMaxTokenSupplyForStage(uint256 got, uint256 maximum);
/**
* @dev Revert with an error if supplied signed feeBps is greater than
* the maximum specified, or less than the minimum.
*/
error InvalidSignedFeeBps(uint256 got, uint256 minimumOrMaximum);
/**
* @dev Revert with an error if signed mint did not specify to restrict
* fee recipients.
*/
error SignedMintsMustRestrictFeeRecipients();
/**
* @dev Revert with an error if a signature for a signed mint has already
* been used.
*/
error SignatureAlreadyUsed();
/**
* @dev An event with details of a SeaDrop mint, for analytical purposes.
*
* @param nftContract The nft contract.
* @param minter The mint recipient.
* @param feeRecipient The fee recipient.
* @param payer The address who payed for the tx.
* @param quantityMinted The number of tokens minted.
* @param unitMintPrice The amount paid for each token.
* @param feeBps The fee out of 10_000 basis points collected.
* @param dropStageIndex The drop stage index. Items minted
* through mintPublic() have
* dropStageIndex of 0.
*/
event SeaDropMint(
address indexed nftContract,
address indexed minter,
address indexed feeRecipient,
address payer,
uint256 quantityMinted,
uint256 unitMintPrice,
uint256 feeBps,
uint256 dropStageIndex
);
/**
* @dev An event with updated public drop data for an nft contract.
*/
event PublicDropUpdated(
address indexed nftContract,
PublicDrop publicDrop
);
/**
* @dev An event with updated token gated drop stage data
* for an nft contract.
*/
event TokenGatedDropStageUpdated(
address indexed nftContract,
address indexed allowedNftToken,
TokenGatedDropStage dropStage
);
/**
* @dev An event with updated allow list data for an nft contract.
*
* @param nftContract The nft contract.
* @param previousMerkleRoot The previous allow list merkle root.
* @param newMerkleRoot The new allow list merkle root.
* @param publicKeyURI If the allow list is encrypted, the public key
* URIs that can decrypt the list.
* Empty if unencrypted.
* @param allowListURI The URI for the allow list.
*/
event AllowListUpdated(
address indexed nftContract,
bytes32 indexed previousMerkleRoot,
bytes32 indexed newMerkleRoot,
string[] publicKeyURI,
string allowListURI
);
/**
* @dev An event with updated drop URI for an nft contract.
*/
event DropURIUpdated(address indexed nftContract, string newDropURI);
/**
* @dev An event with the updated creator payout address for an nft
* contract.
*/
event CreatorPayoutAddressUpdated(
address indexed nftContract,
address indexed newPayoutAddress
);
/**
* @dev An event with the updated allowed fee recipient for an nft
* contract.
*/
event AllowedFeeRecipientUpdated(
address indexed nftContract,
address indexed feeRecipient,
bool indexed allowed
);
/**
* @dev An event with the updated validation parameters for server-side
* signers.
*/
event SignedMintValidationParamsUpdated(
address indexed nftContract,
address indexed signer,
SignedMintValidationParams signedMintValidationParams
);
/**
* @dev An event with the updated payer for an nft contract.
*/
event PayerUpdated(
address indexed nftContract,
address indexed payer,
bool indexed allowed
);
}
// File: seadrop-main/src/interfaces/ISeaDrop.sol
pragma solidity ^0.8.17;
interface ISeaDrop is SeaDropErrorsAndEvents {
/**
* @notice Mint a public drop.
*
* @param nftContract The nft contract to mint.
* @param feeRecipient The fee recipient.
* @param minterIfNotPayer The mint recipient if different than the payer.
* @param quantity The number of tokens to mint.
*/
function mintPublic(
address nftContract,
address feeRecipient,
address minterIfNotPayer,
uint256 quantity
) external payable;
/**
* @notice Mint from an allow list.
*
* @param nftContract The nft contract to mint.
* @param feeRecipient The fee recipient.
* @param minterIfNotPayer The mint recipient if different than the payer.
* @param quantity The number of tokens to mint.
* @param mintParams The mint parameters.
* @param proof The proof for the leaf of the allow list.
*/
function mintAllowList(
address nftContract,
address feeRecipient,
address minterIfNotPayer,
uint256 quantity,
MintParams calldata mintParams,
bytes32[] calldata proof
) external payable;
/**
* @notice Mint with a server-side signature.
* Note that a signature can only be used once.
*
* @param nftContract The nft contract to mint.
* @param feeRecipient The fee recipient.
* @param minterIfNotPayer The mint recipient if different than the payer.
* @param quantity The number of tokens to mint.
* @param mintParams The mint parameters.
* @param salt The sale for the signed mint.
* @param signature The server-side signature, must be an allowed
* signer.
*/
function mintSigned(
address nftContract,
address feeRecipient,
address minterIfNotPayer,
uint256 quantity,
MintParams calldata mintParams,
uint256 salt,
bytes calldata signature
) external payable;
/**
* @notice Mint as an allowed token holder.
* This will mark the token id as redeemed and will revert if the
* same token id is attempted to be redeemed twice.
*
* @param nftContract The nft contract to mint.
* @param feeRecipient The fee recipient.
* @param minterIfNotPayer The mint recipient if different than the payer.
* @param mintParams The token gated mint params.
*/
function mintAllowedTokenHolder(
address nftContract,
address feeRecipient,
address minterIfNotPayer,
TokenGatedMintParams calldata mintParams
) external payable;
/**
* @notice Emits an event to notify update of the drop URI.
*
* This method assume msg.sender is an nft contract and its
* ERC165 interface id matches INonFungibleSeaDropToken.
*
* Note: Be sure only authorized users can call this from
* token contracts that implement INonFungibleSeaDropToken.
*
* @param dropURI The new drop URI.
*/
function updateDropURI(string calldata dropURI) external;
/**
* @notice Updates the public drop data for the nft contract
* and emits an event.
*
* This method assume msg.sender is an nft contract and its
* ERC165 interface id matches INonFungibleSeaDropToken.
*
* Note: Be sure only authorized users can call this from
* token contracts that implement INonFungibleSeaDropToken.
*
* @param publicDrop The public drop data.
*/
function updatePublicDrop(PublicDrop calldata publicDrop) external;
/**
* @notice Updates the allow list merkle root for the nft contract
* and emits an event.
*
* This method assume msg.sender is an nft contract and its
* ERC165 interface id matches INonFungibleSeaDropToken.
*
* Note: Be sure only authorized users can call this from
* token contracts that implement INonFungibleSeaDropToken.
*
* @param allowListData The allow list data.
*/
function updateAllowList(AllowListData calldata allowListData) external;
/**
* @notice Updates the token gated drop stage for the nft contract
* and emits an event.
*
* This method assume msg.sender is an nft contract and its
* ERC165 interface id matches INonFungibleSeaDropToken.
*
* Note: Be sure only authorized users can call this from
* token contracts that implement INonFungibleSeaDropToken.
*
* Note: If two INonFungibleSeaDropToken tokens are doing
* simultaneous token gated drop promotions for each other,
* they can be minted by the same actor until
* `maxTokenSupplyForStage` is reached. Please ensure the
* `allowedNftToken` is not running an active drop during
* the `dropStage` time period.
*
* @param allowedNftToken The token gated nft token.
* @param dropStage The token gated drop stage data.
*/
function updateTokenGatedDrop(
address allowedNftToken,
TokenGatedDropStage calldata dropStage
) external;
/**
* @notice Updates the creator payout address and emits an event.
*
* This method assume msg.sender is an nft contract and its
* ERC165 interface id matches INonFungibleSeaDropToken.
*
* Note: Be sure only authorized users can call this from
* token contracts that implement INonFungibleSeaDropToken.
*
* @param payoutAddress The creator payout address.
*/
function updateCreatorPayoutAddress(address payoutAddress) external;
/**
* @notice Updates the allowed fee recipient and emits an event.
*
* This method assume msg.sender is an nft contract and its
* ERC165 interface id matches INonFungibleSeaDropToken.
*
* Note: Be sure only authorized users can call this from
* token contracts that implement INonFungibleSeaDropToken.
*
* @param feeRecipient The fee recipient.
* @param allowed If the fee recipient is allowed.
*/
function updateAllowedFeeRecipient(address feeRecipient, bool allowed)
external;
/**
* @notice Updates the allowed server-side signers and emits an event.
*
* This method assume msg.sender is an nft contract and its
* ERC165 interface id matches INonFungibleSeaDropToken.
*
* Note: Be sure only authorized users can call this from
* token contracts that implement INonFungibleSeaDropToken.
*
* @param signer The signer to update.
* @param signedMintValidationParams Minimum and maximum parameters
* to enforce for signed mints.
*/
function updateSignedMintValidationParams(
address signer,
SignedMintValidationParams calldata signedMintValidationParams
) external;
/**
* @notice Updates the allowed payer and emits an event.
*
* This method assume msg.sender is an nft contract and its
* ERC165 interface id matches INonFungibleSeaDropToken.
*
* Note: Be sure only authorized users can call this from
* token contracts that implement INonFungibleSeaDropToken.
*
* @param payer The payer to add or remove.
* @param allowed Whether to add or remove the payer.
*/
function updatePayer(address payer, bool allowed) external;
/**
* @notice Returns the public drop data for the nft contract.
*
* @param nftContract The nft contract.
*/
function getPublicDrop(address nftContract)
external
view
returns (PublicDrop memory);
/**
* @notice Returns the creator payout address for the nft contract.
*
* @param nftContract The nft contract.
*/
function getCreatorPayoutAddress(address nftContract)
external
view
returns (address);
/**
* @notice Returns the allow list merkle root for the nft contract.
*
* @param nftContract The nft contract.
*/
function getAllowListMerkleRoot(address nftContract)
external
view
returns (bytes32);
/**
* @notice Returns if the specified fee recipient is allowed
* for the nft contract.
*
* @param nftContract The nft contract.
* @param feeRecipient The fee recipient.
*/
function getFeeRecipientIsAllowed(address nftContract, address feeRecipient)
external
view
returns (bool);
/**
* @notice Returns an enumeration of allowed fee recipients for an
* nft contract when fee recipients are enforced
*
* @param nftContract The nft contract.
*/
function getAllowedFeeRecipients(address nftContract)
external
view
returns (address[] memory);
/**
* @notice Returns the server-side signers for the nft contract.
*
* @param nftContract The nft contract.
*/
function getSigners(address nftContract)
external
view
returns (address[] memory);
/**
* @notice Returns the struct of SignedMintValidationParams for a signer.
*
* @param nftContract The nft contract.
* @param signer The signer.
*/
function getSignedMintValidationParams(address nftContract, address signer)
external
view
returns (SignedMintValidationParams memory);
/**
* @notice Returns the payers for the nft contract.
*
* @param nftContract The nft contract.
*/
function getPayers(address nftContract)
external
view
returns (address[] memory);
/**
* @notice Returns if the specified payer is allowed
* for the nft contract.
*
* @param nftContract The nft contract.
* @param payer The payer.
*/
function getPayerIsAllowed(address nftContract, address payer)
external
view
returns (bool);
/**
* @notice Returns the allowed token gated drop tokens for the nft contract.
*
* @param nftContract The nft contract.
*/
function getTokenGatedAllowedTokens(address nftContract)
external
view
returns (address[] memory);
/**
* @notice Returns the token gated drop data for the nft contract
* and token gated nft.
*
* @param nftContract The nft contract.
* @param allowedNftToken The token gated nft token.
*/
function getTokenGatedDrop(address nftContract, address allowedNftToken)
external
view
returns (TokenGatedDropStage memory);
/**
* @notice Returns whether the token id for a token gated drop has been
* redeemed.
*
* @param nftContract The nft contract.
* @param allowedNftToken The token gated nft token.
* @param allowedNftTokenId The token gated nft token id to check.
*/
function getAllowedNftTokenIdIsRedeemed(
address nftContract,
address allowedNftToken,
uint256 allowedNftTokenId
) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: erc721a/contracts/IERC721A.sol
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs
pragma solidity ^0.8.4;
/**
* @dev Interface of ERC721A.
*/
interface IERC721A {
/**
* The caller must own the token or be an approved operator.
*/
error ApprovalCallerNotOwnerNorApproved();
/**
* The token does not exist.
*/
error ApprovalQueryForNonexistentToken();
/**
* Cannot query the balance for the zero address.
*/
error BalanceQueryForZeroAddress();
/**
* Cannot mint to the zero address.
*/
error MintToZeroAddress();
/**
* The quantity of tokens minted must be more than zero.
*/
error MintZeroQuantity();
/**
* The token does not exist.
*/
error OwnerQueryForNonexistentToken();
/**
* The caller must own the token or be an approved operator.
*/
error TransferCallerNotOwnerNorApproved();
/**
* The token must be owned by `from`.
*/
error TransferFromIncorrectOwner();
/**
* Cannot safely transfer to a contract that does not implement the
* ERC721Receiver interface.
*/
error TransferToNonERC721ReceiverImplementer();
/**
* Cannot transfer to the zero address.
*/
error TransferToZeroAddress();
/**
* The token does not exist.
*/
error URIQueryForNonexistentToken();
/**
* The `quantity` minted with ERC2309 exceeds the safety limit.
*/
error MintERC2309QuantityExceedsLimit();
/**
* The `extraData` cannot be set on an unintialized ownership slot.
*/
error OwnershipNotInitializedForExtraData();
// =============================================================
// STRUCTS
// =============================================================
struct TokenOwnership {
// The address of the owner.
address addr;
// Stores the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
// Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.
uint24 extraData;
}
// =============================================================
// TOKEN COUNTERS
// =============================================================
/**
* @dev Returns the total number of tokens in existence.
* Burned tokens will reduce the count.
* To get the total number of tokens minted, please see {_totalMinted}.
*/
function totalSupply() external view returns (uint256);
// =============================================================
// IERC165
// =============================================================
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
* to learn more about how these ids are created.
*
* This function call must use less than 30000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
// =============================================================
// IERC721
// =============================================================
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables
* (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in `owner`'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`,
* checking first that contract recipients are aware of the ERC721 protocol
* to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move
* this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external payable;
/**
* @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external payable;
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom}
* whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external payable;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the
* zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external payable;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom}
* for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
// =============================================================
// IERC721Metadata
// =============================================================
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
// =============================================================
// IERC2309
// =============================================================
/**
* @dev Emitted when tokens in `fromTokenId` to `toTokenId`
* (inclusive) is transferred from `from` to `to`, as defined in the
* [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.
*
* See {_mintERC2309} for more details.
*/
event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);
}
// File: erc721a/contracts/ERC721A.sol
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs
pragma solidity ^0.8.4;
/**
* @dev Interface of ERC721 token receiver.
*/
interface ERC721A__IERC721Receiver {
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
/**
* @title ERC721A
*
* @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)
* Non-Fungible Token Standard, including the Metadata extension.
* Optimized for lower gas during batch mints.
*
* Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)
* starting from `_startTokenId()`.
*
* Assumptions:
*
* - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
* - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).
*/
contract ERC721A is IERC721A {
// Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).
struct TokenApprovalRef {
address value;
}
// =============================================================
// CONSTANTS
// =============================================================
// Mask of an entry in packed address data.
uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;
// The bit position of `numberMinted` in packed address data.
uint256 private constant _BITPOS_NUMBER_MINTED = 64;
// The bit position of `numberBurned` in packed address data.
uint256 private constant _BITPOS_NUMBER_BURNED = 128;
// The bit position of `aux` in packed address data.
uint256 private constant _BITPOS_AUX = 192;
// Mask of all 256 bits in packed address data except the 64 bits for `aux`.
uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;
// The bit position of `startTimestamp` in packed ownership.
uint256 private constant _BITPOS_START_TIMESTAMP = 160;
// The bit mask of the `burned` bit in packed ownership.
uint256 private constant _BITMASK_BURNED = 1 << 224;
// The bit position of the `nextInitialized` bit in packed ownership.
uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;
// The bit mask of the `nextInitialized` bit in packed ownership.
uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;
// The bit position of `extraData` in packed ownership.
uint256 private constant _BITPOS_EXTRA_DATA = 232;
// Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;
// The mask of the lower 160 bits for addresses.
uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;
// The maximum `quantity` that can be minted with {_mintERC2309}.
// This limit is to prevent overflows on the address data entries.
// For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}
// is required to cause an overflow, which is unrealistic.
uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;
// The `Transfer` event signature is given by:
// `keccak256(bytes("Transfer(address,address,uint256)"))`.
bytes32 private constant _TRANSFER_EVENT_SIGNATURE =
0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;
// =============================================================
// STORAGE
// =============================================================
// The next token ID to be minted.
uint256 private _currentIndex;
// The number of tokens burned.
uint256 private _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned.
// See {_packedOwnershipOf} implementation for details.
//
// Bits Layout:
// - [0..159] `addr`
// - [160..223] `startTimestamp`
// - [224] `burned`
// - [225] `nextInitialized`
// - [232..255] `extraData`
mapping(uint256 => uint256) private _packedOwnerships;
// Mapping owner address to address data.
//
// Bits Layout:
// - [0..63] `balance`
// - [64..127] `numberMinted`
// - [128..191] `numberBurned`
// - [192..255] `aux`
mapping(address => uint256) private _packedAddressData;
// Mapping from token ID to approved address.
mapping(uint256 => TokenApprovalRef) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// =============================================================
// CONSTRUCTOR
// =============================================================
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
// =============================================================
// TOKEN COUNTING OPERATIONS
// =============================================================
/**
* @dev Returns the starting token ID.
* To change the starting token ID, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev Returns the next token ID to be minted.
*/
function _nextTokenId() internal view virtual returns (uint256) {
return _currentIndex;
}
/**
* @dev Returns the total number of tokens in existence.
* Burned tokens will reduce the count.
* To get the total number of tokens minted, please see {_totalMinted}.
*/
function totalSupply() public view virtual override returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than `_currentIndex - _startTokenId()` times.
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* @dev Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view virtual returns (uint256) {
// Counter underflow is impossible as `_currentIndex` does not decrement,
// and it is initialized to `_startTokenId()`.
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev Returns the total number of tokens burned.
*/
function _totalBurned() internal view virtual returns (uint256) {
return _burnCounter;
}
// =============================================================
// ADDRESS DATA OPERATIONS
// =============================================================
/**
* @dev Returns the number of tokens in `owner`'s account.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
return uint64(_packedAddressData[owner] >> _BITPOS_AUX);
}
/**
* Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal virtual {
uint256 packed = _packedAddressData[owner];
uint256 auxCasted;
// Cast `aux` with assembly to avoid redundant masking.
assembly {
auxCasted := aux
}
packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);
_packedAddressData[owner] = packed;
}
// =============================================================
// IERC165
// =============================================================
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
* to learn more about how these ids are created.
*
* This function call must use less than 30000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
// The interface IDs are constants representing the first 4 bytes
// of the XOR of all function selectors in the interface.
// See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)
// (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)
return
interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
}
// =============================================================
// IERC721Metadata
// =============================================================
/**
* @dev Returns the token collection name.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the token collection symbol.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, it can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
// =============================================================
// OWNERSHIPS OPERATIONS
// =============================================================
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
return address(uint160(_packedOwnershipOf(tokenId)));
}
/**
* @dev Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around over time.
*/
function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnershipOf(tokenId));
}
/**
* @dev Returns the unpacked `TokenOwnership` struct at `index`.
*/
function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnerships[index]);
}
/**
* @dev Initializes the ownership slot minted at `index` for efficiency purposes.
*/
function _initializeOwnershipAt(uint256 index) internal virtual {
if (_packedOwnerships[index] == 0) {
_packedOwnerships[index] = _packedOwnershipOf(index);
}
}
/**
* Returns the packed ownership data of `tokenId`.
*/
function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr)
if (curr < _currentIndex) {
uint256 packed = _packedOwnerships[curr];
// If not burned.
if (packed & _BITMASK_BURNED == 0) {
// Invariant:
// There will always be an initialized ownership slot
// (i.e. `ownership.addr != address(0) && ownership.burned == false`)
// before an unintialized ownership slot
// (i.e. `ownership.addr == address(0) && ownership.burned == false`)
// Hence, `curr` will not underflow.
//
// We can directly compare the packed value.
// If the address is zero, packed will be zero.
while (packed == 0) {
packed = _packedOwnerships[--curr];
}
return packed;
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* @dev Returns the unpacked `TokenOwnership` struct from `packed`.
*/
function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
ownership.addr = address(uint160(packed));
ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);
ownership.burned = packed & _BITMASK_BURNED != 0;
ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);
}
/**
* @dev Packs ownership data into a single uint256.
*/
function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {
assembly {
// Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
owner := and(owner, _BITMASK_ADDRESS)
// `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.
result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))
}
}
/**
* @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
*/
function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {
// For branchless setting of the `nextInitialized` flag.
assembly {
// `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.
result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
}
}
// =============================================================
// APPROVAL OPERATIONS
// =============================================================
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the
* zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) public payable virtual override {
address owner = ownerOf(tokenId);
if (_msgSenderERC721A() != owner)
if (!isApprovedForAll(owner, _msgSenderERC721A())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_tokenApprovals[tokenId].value = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId].value;
}
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom}
* for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_operatorApprovals[_msgSenderERC721A()][operator] = approved;
emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
}
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted. See {_mint}.
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return
_startTokenId() <= tokenId &&
tokenId < _currentIndex && // If within bounds,
_packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.
}
/**
* @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.
*/
function _isSenderApprovedOrOwner(
address approvedAddress,
address owner,
address msgSender
) private pure returns (bool result) {
assembly {
// Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
owner := and(owner, _BITMASK_ADDRESS)
// Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
msgSender := and(msgSender, _BITMASK_ADDRESS)
// `msgSender == owner || msgSender == approvedAddress`.
result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))
}
}
/**
* @dev Returns the storage slot and value for the approved address of `tokenId`.
*/
function _getApprovedSlotAndAddress(uint256 tokenId)
private
view
returns (uint256 approvedAddressSlot, address approvedAddress)
{
TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];
// The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.
assembly {
approvedAddressSlot := tokenApproval.slot
approvedAddress := sload(approvedAddressSlot)
}
}
// =============================================================
// TRANSFER OPERATIONS
// =============================================================
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public payable virtual override {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();
(uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);
// The nested ifs save around 20+ gas over a compound boolean condition.
if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner.
assembly {
if approvedAddress {
// This is equivalent to `delete _tokenApprovals[tokenId]`.
sstore(approvedAddressSlot, 0)
}
}
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
unchecked {
// We can directly increment and decrement the balances.
--_packedAddressData[from]; // Updates: `balance -= 1`.
++_packedAddressData[to]; // Updates: `balance += 1`.
// Updates:
// - `address` to the next owner.
// - `startTimestamp` to the timestamp of transfering.
// - `burned` to `false`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] = _packOwnershipData(
to,
_BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)
);
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public payable virtual override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public payable virtual override {
transferFrom(from, to, tokenId);
if (to.code.length != 0)
if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Hook that is called before a set of serially-ordered token IDs
* are about to be transferred. This includes minting.
* And also called before burning one token.
*
* `startTokenId` - the first token ID to be transferred.
* `quantity` - the amount to be transferred.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token IDs
* have been transferred. This includes minting.
* And also called after one token has been burned.
*
* `startTokenId` - the first token ID to be transferred.
* `quantity` - the amount to be transferred.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* `from` - Previous owner of the given token ID.
* `to` - Target address that will receive the token.
* `tokenId` - Token ID to be transferred.
* `_data` - Optional data to send along with the call.
*
* Returns whether the call correctly returned the expected magic value.
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (
bytes4 retval
) {
return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
// =============================================================
// MINT OPERATIONS
// =============================================================
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event for each mint.
*/
function _mint(address to, uint256 quantity) internal virtual {
uint256 startTokenId = _currentIndex;
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// `balance` and `numberMinted` have a maximum limit of 2**64.
// `tokenId` has a maximum limit of 2**256.
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the `balance` and `numberMinted`.
_packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] = _packOwnershipData(
to,
_nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
);
uint256 toMasked;
uint256 end = startTokenId + quantity;
// Use assembly to loop and emit the `Transfer` event for gas savings.
// The duplicated `log4` removes an extra check and reduces stack juggling.
// The assembly, together with the surrounding Solidity code, have been
// delicately arranged to nudge the compiler into producing optimized opcodes.
assembly {
// Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
toMasked := and(to, _BITMASK_ADDRESS)
// Emit the `Transfer` event.
log4(
0, // Start of data (0, since no data).
0, // End of data (0, since no data).
_TRANSFER_EVENT_SIGNATURE, // Signature.
0, // `address(0)`.
toMasked, // `to`.
startTokenId // `tokenId`.
)
// The `iszero(eq(,))` check ensures that large values of `quantity`
// that overflows uint256 will make the loop run out of gas.
// The compiler will optimize the `iszero` away for performance.
for {
let tokenId := add(startTokenId, 1)
} iszero(eq(tokenId, end)) {
tokenId := add(tokenId, 1)
} {
// Emit the `Transfer` event. Similar to above.
log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)
}
}
if (toMasked == 0) revert MintToZeroAddress();
_currentIndex = end;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* This function is intended for efficient minting only during contract creation.
*
* It emits only one {ConsecutiveTransfer} as defined in
* [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
* instead of a sequence of {Transfer} event(s).
*
* Calling this function outside of contract creation WILL make your contract
* non-compliant with the ERC721 standard.
* For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
* {ConsecutiveTransfer} event is only permissible during contract creation.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {ConsecutiveTransfer} event.
*/
function _mintERC2309(address to, uint256 quantity) internal virtual {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are unrealistic due to the above check for `quantity` to be below the limit.
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the `balance` and `numberMinted`.
_packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] = _packOwnershipData(
to,
_nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
);
emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);
_currentIndex = startTokenId + quantity;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* See {_mint}.
*
* Emits a {Transfer} event for each mint.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal virtual {
_mint(to, quantity);
unchecked {
if (to.code.length != 0) {
uint256 end = _currentIndex;
uint256 index = end - quantity;
do {
if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
} while (index < end);
// Reentrancy protection.
if (_currentIndex != end) revert();
}
}
}
/**
* @dev Equivalent to `_safeMint(to, quantity, '')`.
*/
function _safeMint(address to, uint256 quantity) internal virtual {
_safeMint(to, quantity, '');
}
// =============================================================
// BURN OPERATIONS
// =============================================================
/**
* @dev Equivalent to `_burn(tokenId, false)`.
*/
function _burn(uint256 tokenId) internal virtual {
_burn(tokenId, false);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
address from = address(uint160(prevOwnershipPacked));
(uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);
if (approvalCheck) {
// The nested ifs save around 20+ gas over a compound boolean condition.
if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
}
_beforeTokenTransfers(from, address(0), tokenId, 1);
// Clear approvals from the previous owner.
assembly {
if approvedAddress {
// This is equivalent to `delete _tokenApprovals[tokenId]`.
sstore(approvedAddressSlot, 0)
}
}
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
unchecked {
// Updates:
// - `balance -= 1`.
// - `numberBurned += 1`.
//
// We can directly decrement the balance, and increment the number burned.
// This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.
_packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;
// Updates:
// - `address` to the last owner.
// - `startTimestamp` to the timestamp of burning.
// - `burned` to `true`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] = _packOwnershipData(
from,
(_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)
);
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, address(0), tokenId);
_afterTokenTransfers(from, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
// =============================================================
// EXTRA DATA OPERATIONS
// =============================================================
/**
* @dev Directly sets the extra data for the ownership data `index`.
*/
function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {
uint256 packed = _packedOwnerships[index];
if (packed == 0) revert OwnershipNotInitializedForExtraData();
uint256 extraDataCasted;
// Cast `extraData` with assembly to avoid redundant masking.
assembly {
extraDataCasted := extraData
}
packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);
_packedOwnerships[index] = packed;
}
/**
* @dev Called during each token transfer to set the 24bit `extraData` field.
* Intended to be overridden by the cosumer contract.
*
* `previousExtraData` - the value of `extraData` before transfer.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _extraData(
address from,
address to,
uint24 previousExtraData
) internal view virtual returns (uint24) {}
/**
* @dev Returns the next extra data for the packed ownership data.
* The returned result is shifted into position.
*/
function _nextExtraData(
address from,
address to,
uint256 prevOwnershipPacked
) private view returns (uint256) {
uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);
return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;
}
// =============================================================
// OTHER OPERATIONS
// =============================================================
/**
* @dev Returns the message sender (defaults to `msg.sender`).
*
* If you are writing GSN compatible contracts, you need to override this function.
*/
function _msgSenderERC721A() internal view virtual returns (address) {
return msg.sender;
}
/**
* @dev Converts a uint256 to its ASCII string decimal representation.
*/
function _toString(uint256 value) internal pure virtual returns (string memory str) {
assembly {
// The maximum value of a uint256 contains 78 digits (1 byte per digit), but
// we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.
// We will need 1 word for the trailing zeros padding, 1 word for the length,
// and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.
let m := add(mload(0x40), 0xa0)
// Update the free memory pointer to allocate.
mstore(0x40, m)
// Assign the `str` to the end.
str := sub(m, 0x20)
// Zeroize the slot after the string.
mstore(str, 0)
// Cache the end of the memory to calculate the length later.
let end := str
// We write the string from rightmost digit to leftmost digit.
// The following is essentially a do-while loop that also handles the zero case.
// prettier-ignore
for { let temp := value } 1 {} {
str := sub(str, 1)
// Write the character to the pointer.
// The ASCII index of the '0' character is 48.
mstore8(str, add(48, mod(temp, 10)))
// Keep dividing `temp` until zero.
temp := div(temp, 10)
// prettier-ignore
if iszero(temp) { break }
}
let length := sub(end, str)
// Move the pointer 32 bytes leftwards to make room for the length.
str := sub(str, 0x20)
// Store the length.
mstore(str, length)
}
}
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/interfaces/IERC2981.sol
// OpenZeppelin Contracts (last updated v4.6.0) (interfaces/IERC2981.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface for the NFT Royalty Standard.
*
* A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
* support for royalty payments across all NFT marketplaces and ecosystem participants.
*
* _Available since v4.5._
*/
interface IERC2981 is IERC165 {
/**
* @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
* exchange. The royalty amount is denominated and should be paid in that same unit of exchange.
*/
function royaltyInfo(uint256 tokenId, uint256 salePrice)
external
view
returns (address receiver, uint256 royaltyAmount);
}
// File: @openzeppelin/contracts/token/common/ERC2981.sol
// OpenZeppelin Contracts (last updated v4.7.0) (token/common/ERC2981.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.
*
* Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for
* specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.
*
* Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the
* fee is specified in basis points by default.
*
* IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See
* https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to
* voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.
*
* _Available since v4.5._
*/
abstract contract ERC2981 is IERC2981, ERC165 {
struct RoyaltyInfo {
address receiver;
uint96 royaltyFraction;
}
RoyaltyInfo private _defaultRoyaltyInfo;
mapping(uint256 => RoyaltyInfo) private _tokenRoyaltyInfo;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {
return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @inheritdoc IERC2981
*/
function royaltyInfo(uint256 _tokenId, uint256 _salePrice) public view virtual override returns (address, uint256) {
RoyaltyInfo memory royalty = _tokenRoyaltyInfo[_tokenId];
if (royalty.receiver == address(0)) {
royalty = _defaultRoyaltyInfo;
}
uint256 royaltyAmount = (_salePrice * royalty.royaltyFraction) / _feeDenominator();
return (royalty.receiver, royaltyAmount);
}
/**
* @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a
* fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an
* override.
*/
function _feeDenominator() internal pure virtual returns (uint96) {
return 10000;
}
/**
* @dev Sets the royalty information that all ids in this contract will default to.
*
* Requirements:
*
* - `receiver` cannot be the zero address.
* - `feeNumerator` cannot be greater than the fee denominator.
*/
function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {
require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
require(receiver != address(0), "ERC2981: invalid receiver");
_defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);
}
/**
* @dev Removes default royalty information.
*/
function _deleteDefaultRoyalty() internal virtual {
delete _defaultRoyaltyInfo;
}
/**
* @dev Sets the royalty information for a specific token id, overriding the global default.
*
* Requirements:
*
* - `receiver` cannot be the zero address.
* - `feeNumerator` cannot be greater than the fee denominator.
*/
function _setTokenRoyalty(
uint256 tokenId,
address receiver,
uint96 feeNumerator
) internal virtual {
require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
require(receiver != address(0), "ERC2981: Invalid parameters");
_tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);
}
/**
* @dev Resets royalty information for the token id back to the global default.
*/
function _resetTokenRoyalty(uint256 tokenId) internal virtual {
delete _tokenRoyaltyInfo[tokenId];
}
}
// File: seadrop-main/src/interfaces/ISeaDropTokenContractMetadata.sol
pragma solidity ^0.8.17;
interface ISeaDropTokenContractMetadata is IERC2981 {
/**
* @notice Throw if the max supply exceeds uint64, a limit
* due to the storage of bit-packed variables in ERC721A.
*/
error CannotExceedMaxSupplyOfUint64(uint256 newMaxSupply);
/**
* @dev Revert with an error when attempting to set the provenance
* hash after the mint has started.
*/
error ProvenanceHashCannotBeSetAfterMintStarted();
/**
* @dev Revert if the royalty basis points is greater than 10_000.
*/
error InvalidRoyaltyBasisPoints(uint256 basisPoints);
/**
* @dev Revert if the royalty address is being set to the zero address.
*/
error RoyaltyAddressCannotBeZeroAddress();
/**
* @dev Emit an event for token metadata reveals/updates,
* according to EIP-4906.
*
* @param _fromTokenId The start token id.
* @param _toTokenId The end token id.
*/
event BatchMetadataUpdate(uint256 _fromTokenId, uint256 _toTokenId);
/**
* @dev Emit an event when the URI for the collection-level metadata
* is updated.
*/
event ContractURIUpdated(string newContractURI);
/**
* @dev Emit an event when the max token supply is updated.
*/
event MaxSupplyUpdated(uint256 newMaxSupply);
/**
* @dev Emit an event with the previous and new provenance hash after
* being updated.
*/
event ProvenanceHashUpdated(bytes32 previousHash, bytes32 newHash);
/**
* @dev Emit an event when the royalties info is updated.
*/
event RoyaltyInfoUpdated(address receiver, uint256 bps);
/**
* @notice A struct defining royalty info for the contract.
*/
struct RoyaltyInfo {
address royaltyAddress;
uint96 royaltyBps;
}
/**
* @notice Sets the base URI for the token metadata and emits an event.
*
* @param tokenURI The new base URI to set.
*/
function setBaseURI(string calldata tokenURI) external;
/**
* @notice Sets the contract URI for contract metadata.
*
* @param newContractURI The new contract URI.
*/
function setContractURI(string calldata newContractURI) external;
/**
* @notice Sets the max supply and emits an event.
*
* @param newMaxSupply The new max supply to set.
*/
function setMaxSupply(uint256 newMaxSupply) external;
/**
* @notice Sets the provenance hash and emits an event.
*
* The provenance hash is used for random reveals, which
* is a hash of the ordered metadata to show it has not been
* modified after mint started.
*
* This function will revert after the first item has been minted.
*
* @param newProvenanceHash The new provenance hash to set.
*/
function setProvenanceHash(bytes32 newProvenanceHash) external;
/**
* @notice Sets the address and basis points for royalties.
*
* @param newInfo The struct to configure royalties.
*/
function setRoyaltyInfo(RoyaltyInfo calldata newInfo) external;
/**
* @notice Returns the base URI for token metadata.
*/
function baseURI() external view returns (string memory);
/**
* @notice Returns the contract URI.
*/
function contractURI() external view returns (string memory);
/**
* @notice Returns the max token supply.
*/
function maxSupply() external view returns (uint256);
/**
* @notice Returns the provenance hash.
* The provenance hash is used for random reveals, which
* is a hash of the ordered metadata to show it is unmodified
* after mint has started.
*/
function provenanceHash() external view returns (bytes32);
/**
* @notice Returns the address that receives royalties.
*/
function royaltyAddress() external view returns (address);
/**
* @notice Returns the royalty basis points out of 10_000.
*/
function royaltyBasisPoints() external view returns (uint256);
}
// File: seadrop-main/src/interfaces/INonFungibleSeaDropToken.sol
pragma solidity ^0.8.17;
interface INonFungibleSeaDropToken is ISeaDropTokenContractMetadata {
/**
* @dev Revert with an error if a contract is not an allowed
* SeaDrop address.
*/
error OnlyAllowedSeaDrop();
/**
* @dev Emit an event when allowed SeaDrop contracts are updated.
*/
event AllowedSeaDropUpdated(address[] allowedSeaDrop);
/**
* @notice Update the allowed SeaDrop contracts.
* Only the owner or administrator can use this function.
*
* @param allowedSeaDrop The allowed SeaDrop addresses.
*/
function updateAllowedSeaDrop(address[] calldata allowedSeaDrop) external;
/**
* @notice Mint tokens, restricted to the SeaDrop contract.
*
* @dev NOTE: If a token registers itself with multiple SeaDrop
* contracts, the implementation of this function should guard
* against reentrancy. If the implementing token uses
* _safeMint(), or a feeRecipient with a malicious receive() hook
* is specified, the token or fee recipients may be able to execute
* another mint in the same transaction via a separate SeaDrop
* contract.
* This is dangerous if an implementing token does not correctly
* update the minterNumMinted and currentTotalSupply values before
* transferring minted tokens, as SeaDrop references these values
* to enforce token limits on a per-wallet and per-stage basis.
*
* @param minter The address to mint to.
* @param quantity The number of tokens to mint.
*/
function mintSeaDrop(address minter, uint256 quantity) external;
/**
* @notice Returns a set of mint stats for the address.
* This assists SeaDrop in enforcing maxSupply,
* maxTotalMintableByWallet, and maxTokenSupplyForStage checks.
*
* @dev NOTE: Implementing contracts should always update these numbers
* before transferring any tokens with _safeMint() to mitigate
* consequences of malicious onERC721Received() hooks.
*
* @param minter The minter address.
*/
function getMintStats(address minter)
external
view
returns (
uint256 minterNumMinted,
uint256 currentTotalSupply,
uint256 maxSupply
);
/**
* @notice Update the public drop data for this nft contract on SeaDrop.
* Only the owner or administrator can use this function.
*
* The administrator can only update `feeBps`.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param publicDrop The public drop data.
*/
function updatePublicDrop(
address seaDropImpl,
PublicDrop calldata publicDrop
) external;
/**
* @notice Update the allow list data for this nft contract on SeaDrop.
* Only the owner or administrator can use this function.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param allowListData The allow list data.
*/
function updateAllowList(
address seaDropImpl,
AllowListData calldata allowListData
) external;
/**
* @notice Update the token gated drop stage data for this nft contract
* on SeaDrop.
* Only the owner or administrator can use this function.
*
* The administrator, when present, must first set `feeBps`.
*
* Note: If two INonFungibleSeaDropToken tokens are doing
* simultaneous token gated drop promotions for each other,
* they can be minted by the same actor until
* `maxTokenSupplyForStage` is reached. Please ensure the
* `allowedNftToken` is not running an active drop during the
* `dropStage` time period.
*
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param allowedNftToken The allowed nft token.
* @param dropStage The token gated drop stage data.
*/
function updateTokenGatedDrop(
address seaDropImpl,
address allowedNftToken,
TokenGatedDropStage calldata dropStage
) external;
/**
* @notice Update the drop URI for this nft contract on SeaDrop.
* Only the owner or administrator can use this function.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param dropURI The new drop URI.
*/
function updateDropURI(address seaDropImpl, string calldata dropURI)
external;
/**
* @notice Update the creator payout address for this nft contract on
* SeaDrop.
* Only the owner can set the creator payout address.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param payoutAddress The new payout address.
*/
function updateCreatorPayoutAddress(
address seaDropImpl,
address payoutAddress
) external;
/**
* @notice Update the allowed fee recipient for this nft contract
* on SeaDrop.
* Only the administrator can set the allowed fee recipient.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param feeRecipient The new fee recipient.
*/
function updateAllowedFeeRecipient(
address seaDropImpl,
address feeRecipient,
bool allowed
) external;
/**
* @notice Update the server-side signers for this nft contract
* on SeaDrop.
* Only the owner or administrator can use this function.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param signer The signer to update.
* @param signedMintValidationParams Minimum and maximum parameters
* to enforce for signed mints.
*/
function updateSignedMintValidationParams(
address seaDropImpl,
address signer,
SignedMintValidationParams memory signedMintValidationParams
) external;
/**
* @notice Update the allowed payers for this nft contract on SeaDrop.
* Only the owner or administrator can use this function.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param payer The payer to update.
* @param allowed Whether the payer is allowed.
*/
function updatePayer(
address seaDropImpl,
address payer,
bool allowed
) external;
}
// File: seadrop-main/src/ERC721ContractMetadata.sol
pragma solidity ^0.8.17;
/**
* @title ERC721ContractMetadata
* @author James Wenzel (emo.eth)
* @author Ryan Ghods (ralxz.eth)
* @author Stephan Min (stephanm.eth)
* @notice ERC721ContractMetadata is a token contract that extends ERC721A
* with additional metadata and ownership capabilities.
*/
contract ERC721ContractMetadata is
ERC721A,
Ownable,
ISeaDropTokenContractMetadata
{
/// @notice Track the max supply.
uint256 _maxSupply;
/// @notice Track the base URI for token metadata.
string _tokenBaseURI;
/// @notice Track the contract URI for contract metadata.
string _contractURI;
/// @notice Track the provenance hash for guaranteeing metadata order
/// for random reveals.
bytes32 _provenanceHash;
/// @notice Track the royalty info: address to receive royalties, and
/// royalty basis points.
RoyaltyInfo _royaltyInfo;
error OnlyOwner();
/**
* @dev Reverts if the sender is not the owner or the contract itself.
* This function is inlined instead of being a modifier
* to save contract space from being inlined N times.
*/
function _onlyOwnerOrSelf() internal view {
if (
_cast(msg.sender == owner()) | _cast(msg.sender == address(this)) ==
0
) {
revert OnlyOwner();
}
}
/**
* @notice Deploy the token contract with its name and symbol.
*/
constructor(string memory name, string memory symbol)
ERC721A(name, symbol)
{}
/**
* @notice Sets the base URI for the token metadata and emits an event.
*
* @param newBaseURI The new base URI to set.
*/
function setBaseURI(string calldata newBaseURI) external override {
// Ensure the sender is only the owner or contract itself.
_onlyOwnerOrSelf();
// Set the new base URI.
_tokenBaseURI = newBaseURI;
// Emit an event with the update.
if (totalSupply() != 0) {
emit BatchMetadataUpdate(1, _nextTokenId() - 1);
}
}
/**
* @notice Sets the contract URI for contract metadata.
*
* @param newContractURI The new contract URI.
*/
function setContractURI(string calldata newContractURI) external override {
// Ensure the sender is only the owner or contract itself.
_onlyOwnerOrSelf();
// Set the new contract URI.
_contractURI = newContractURI;
// Emit an event with the update.
emit ContractURIUpdated(newContractURI);
}
/**
* @notice Emit an event notifying metadata updates for
* a range of token ids, according to EIP-4906.
*
* @param fromTokenId The start token id.
* @param toTokenId The end token id.
*/
function emitBatchMetadataUpdate(uint256 fromTokenId, uint256 toTokenId)
external
{
// Ensure the sender is only the owner or contract itself.
_onlyOwnerOrSelf();
// Emit an event with the update.
emit BatchMetadataUpdate(fromTokenId, toTokenId);
}
/**
* @notice Sets the max token supply and emits an event.
*
* @param newMaxSupply The new max supply to set.
*/
function setMaxSupply(uint256 newMaxSupply) external {
// Ensure the sender is only the owner or contract itself.
_onlyOwnerOrSelf();
// Ensure the max supply does not exceed the maximum value of uint64.
if (newMaxSupply > 2**64 - 1) {
revert CannotExceedMaxSupplyOfUint64(newMaxSupply);
}
// Set the new max supply.
_maxSupply = newMaxSupply;
// Emit an event with the update.
emit MaxSupplyUpdated(newMaxSupply);
}
/**
* @notice Sets the provenance hash and emits an event.
*
* The provenance hash is used for random reveals, which
* is a hash of the ordered metadata to show it has not been
* modified after mint started.
*
* This function will revert after the first item has been minted.
*
* @param newProvenanceHash The new provenance hash to set.
*/
function setProvenanceHash(bytes32 newProvenanceHash) external {
// Ensure the sender is only the owner or contract itself.
_onlyOwnerOrSelf();
// Revert if any items have been minted.
if (_totalMinted() > 0) {
revert ProvenanceHashCannotBeSetAfterMintStarted();
}
// Keep track of the old provenance hash for emitting with the event.
bytes32 oldProvenanceHash = _provenanceHash;
// Set the new provenance hash.
_provenanceHash = newProvenanceHash;
// Emit an event with the update.
emit ProvenanceHashUpdated(oldProvenanceHash, newProvenanceHash);
}
/**
* @notice Sets the address and basis points for royalties.
*
* @param newInfo The struct to configure royalties.
*/
function setRoyaltyInfo(RoyaltyInfo calldata newInfo) external {
// Ensure the sender is only the owner or contract itself.
_onlyOwnerOrSelf();
// Revert if the new royalty address is the zero address.
if (newInfo.royaltyAddress == address(0)) {
revert RoyaltyAddressCannotBeZeroAddress();
}
// Revert if the new basis points is greater than 10_000.
if (newInfo.royaltyBps > 10_000) {
revert InvalidRoyaltyBasisPoints(newInfo.royaltyBps);
}
// Set the new royalty info.
_royaltyInfo = newInfo;
// Emit an event with the updated params.
emit RoyaltyInfoUpdated(newInfo.royaltyAddress, newInfo.royaltyBps);
}
/**
* @notice Returns the base URI for token metadata.
*/
function baseURI() external view override returns (string memory) {
return _baseURI();
}
/**
* @notice Returns the base URI for the contract, which ERC721A uses
* to return tokenURI.
*/
function _baseURI() internal view virtual override returns (string memory) {
return _tokenBaseURI;
}
/**
* @notice Returns the contract URI for contract metadata.
*/
function contractURI() external view override returns (string memory) {
return _contractURI;
}
/**
* @notice Returns the max token supply.
*/
function maxSupply() public view returns (uint256) {
return _maxSupply;
}
/**
* @notice Returns the provenance hash.
* The provenance hash is used for random reveals, which
* is a hash of the ordered metadata to show it is unmodified
* after mint has started.
*/
function provenanceHash() external view override returns (bytes32) {
return _provenanceHash;
}
/**
* @notice Returns the address that receives royalties.
*/
function royaltyAddress() external view returns (address) {
return _royaltyInfo.royaltyAddress;
}
/**
* @notice Returns the royalty basis points out of 10_000.
*/
function royaltyBasisPoints() external view returns (uint256) {
return _royaltyInfo.royaltyBps;
}
/**
* @notice Called with the sale price to determine how much royalty
* is owed and to whom.
*
* @ param _tokenId The NFT asset queried for royalty information.
* @param _salePrice The sale price of the NFT asset specified by
* _tokenId.
*
* @return receiver Address of who should be sent the royalty payment.
* @return royaltyAmount The royalty payment amount for _salePrice.
*/
function royaltyInfo(
uint256, /* _tokenId */
uint256 _salePrice
) external view returns (address receiver, uint256 royaltyAmount) {
// Put the royalty info on the stack for more efficient access.
RoyaltyInfo storage info = _royaltyInfo;
// Set the royalty amount to the sale price times the royalty basis
// points divided by 10_000.
royaltyAmount = (_salePrice * info.royaltyBps) / 10_000;
// Set the receiver of the royalty.
receiver = info.royaltyAddress;
}
/**
* @notice Returns whether the interface is supported.
*
* @param interfaceId The interface id to check against.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(IERC165, ERC721A)
returns (bool)
{
return
interfaceId == type(IERC2981).interfaceId ||
interfaceId == 0x49064906 || // ERC-4906
super.supportsInterface(interfaceId);
}
/**
* @dev Internal pure function to cast a `bool` value to a `uint256` value.
*
* @param b The `bool` value to cast.
*
* @return u The `uint256` value.
*/
function _cast(bool b) internal pure returns (uint256 u) {
assembly {
u := b
}
}
}
// File: seadrop-main/src/ERC721SeaDrop.sol
pragma solidity ^0.8.17;
/**
* @title ERC721SeaDrop
* @author James Wenzel (emo.eth)
* @author Ryan Ghods (ralxz.eth)
* @author Stephan Min (stephanm.eth)
* @author Michael Cohen (notmichael.eth)
* @notice ERC721SeaDrop is a token contract that contains methods
* to properly interact with SeaDrop.
*/
contract DinoTheDiamond is
ERC721ContractMetadata,
INonFungibleSeaDropToken,
ERC721SeaDropStructsErrorsAndEvents,
ReentrancyGuard,
DefaultOperatorFilterer
{
/// @notice Track the allowed SeaDrop addresses.
mapping(address => bool) internal _allowedSeaDrop;
/// @notice Track the enumerated allowed SeaDrop addresses.
address[] internal _enumeratedAllowedSeaDrop;
/// @notice Boolean used to pause and unpause public and whitelist minting.
bool public isPaused;
/**
* @dev Reverts if not an allowed SeaDrop contract.
* This function is inlined instead of being a modifier
* to save contract space from being inlined N times.
*
* @param seaDrop The SeaDrop address to check if allowed.
*/
function _onlyAllowedSeaDrop(address seaDrop) internal view {
if (_allowedSeaDrop[seaDrop] != true) {
revert OnlyAllowedSeaDrop();
}
}
/**
* @notice Deploy the token contract with its name, symbol,
* and allowed SeaDrop addresses.
*/
constructor(
string memory name,
string memory symbol,
address[] memory allowedSeaDrop
) ERC721ContractMetadata(name, symbol) {
// Put the length on the stack for more efficient access.
uint256 allowedSeaDropLength = allowedSeaDrop.length;
// Set the mapping for allowed SeaDrop contracts.
for (uint256 i = 0; i < allowedSeaDropLength; ) {
_allowedSeaDrop[allowedSeaDrop[i]] = true;
unchecked {
++i;
}
}
// Set the enumeration.
_enumeratedAllowedSeaDrop = allowedSeaDrop;
// Emit an event noting the contract deployment.
emit SeaDropTokenDeployed();
}
/**
* @notice Update the allowed SeaDrop contracts.
* Only the owner or administrator can use this function.
*
* @param allowedSeaDrop The allowed SeaDrop addresses.
*/
function updateAllowedSeaDrop(address[] calldata allowedSeaDrop)
external
virtual
override
onlyOwner
{
_updateAllowedSeaDrop(allowedSeaDrop);
}
/**
* @notice Internal function to update the allowed SeaDrop contracts.
*
* @param allowedSeaDrop The allowed SeaDrop addresses.
*/
function _updateAllowedSeaDrop(address[] calldata allowedSeaDrop) internal {
// Put the length on the stack for more efficient access.
uint256 enumeratedAllowedSeaDropLength = _enumeratedAllowedSeaDrop
.length;
uint256 allowedSeaDropLength = allowedSeaDrop.length;
// Reset the old mapping.
for (uint256 i = 0; i < enumeratedAllowedSeaDropLength; ) {
_allowedSeaDrop[_enumeratedAllowedSeaDrop[i]] = false;
unchecked {
++i;
}
}
// Set the new mapping for allowed SeaDrop contracts.
for (uint256 i = 0; i < allowedSeaDropLength; ) {
_allowedSeaDrop[allowedSeaDrop[i]] = true;
unchecked {
++i;
}
}
// Set the enumeration.
_enumeratedAllowedSeaDrop = allowedSeaDrop;
// Emit an event for the update.
emit AllowedSeaDropUpdated(allowedSeaDrop);
}
/**
* @dev Overrides the `_startTokenId` function from ERC721A
* to start at token id `1`.
*
* This is to avoid future possible problems since `0` is usually
* used to signal values that have not been set or have been removed.
*/
function _startTokenId() internal view virtual override returns (uint256) {
return 1;
}
/**
* @dev Overrides the `tokenURI()` function from ERC721A
* to return just the base URI if it is implied to not be a directory.
*
* This is to help with ERC721 contracts in which the same token URI
* is desired for each token, such as when the tokenURI is 'unrevealed'.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
// Exit early if the baseURI is empty.
if (bytes(baseURI).length == 0) {
return "";
}
// Check if the last character in baseURI is a slash.
if (bytes(baseURI)[bytes(baseURI).length - 1] != bytes("/")[0]) {
return baseURI;
}
return string(abi.encodePacked(baseURI, _toString(tokenId), ".json"));
}
/**
* @notice Smart contract owner function
* Pauses and unpauses mintSeadrop function.
*/
function toggleIsPaused() external onlyOwner {
isPaused = !isPaused;
}
/**
* @notice Mint tokens, restricted to the SeaDrop contract.
*
* @dev NOTE: If a token registers itself with multiple SeaDrop
* contracts, the implementation of this function should guard
* against reentrancy. If the implementing token uses
* _safeMint(), or a feeRecipient with a malicious receive() hook
* is specified, the token or fee recipients may be able to execute
* another mint in the same transaction via a separate SeaDrop
* contract.
* This is dangerous if an implementing token does not correctly
* update the minterNumMinted and currentTotalSupply values before
* transferring minted tokens, as SeaDrop references these values
* to enforce token limits on a per-wallet and per-stage basis.
*
* ERC721A tracks these values automatically, but this note and
* nonReentrant modifier are left here to encourage best-practices
* when referencing this contract.
*
* @param minter The address to mint to.
* @param quantity The number of tokens to mint.
*/
function mintSeaDrop(address minter, uint256 quantity)
external
virtual
override
nonReentrant
{
// Ensure the SeaDrop is allowed.
_onlyAllowedSeaDrop(msg.sender);
require(isPaused == false, "Public and whitelist minting is paused");
// Extra safety check to ensure the max supply is not exceeded.
if (_totalMinted() + quantity > maxSupply()) {
revert MintQuantityExceedsMaxSupply(
_totalMinted() + quantity,
maxSupply()
);
}
// Mint the quantity of tokens to the minter.
_safeMint(minter, quantity);
}
/**
* @notice Smart contract owner mint function.
*
* @param recipients The recipients of the nfts.
* @param quantities The quantities of nfts to be minted to the recipients.
*/
function airdrop(address[] calldata recipients, uint256[] calldata quantities) external onlyOwner {
require(recipients.length == quantities.length, "Both the recipients and quantities array sholud be equal in length");
for (uint256 i = 0; i < recipients.length; ++i) {
require(_totalMinted() + quantities[i] <= maxSupply(), "Exceeds maxSupply");
_safeMint(recipients[i], quantities[i]);
}
}
/**
* @notice Update the public drop data for this nft contract on SeaDrop.
* Only the owner can use this function.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param publicDrop The public drop data.
*/
function updatePublicDrop(
address seaDropImpl,
PublicDrop calldata publicDrop
) external virtual override {
// Ensure the sender is only the owner or contract itself.
_onlyOwnerOrSelf();
// Ensure the SeaDrop is allowed.
_onlyAllowedSeaDrop(seaDropImpl);
// Update the public drop data on SeaDrop.
ISeaDrop(seaDropImpl).updatePublicDrop(publicDrop);
}
/**
* @notice Update the allow list data for this nft contract on SeaDrop.
* Only the owner can use this function.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param allowListData The allow list data.
*/
function updateAllowList(
address seaDropImpl,
AllowListData calldata allowListData
) external virtual override {
// Ensure the sender is only the owner or contract itself.
_onlyOwnerOrSelf();
// Ensure the SeaDrop is allowed.
_onlyAllowedSeaDrop(seaDropImpl);
// Update the allow list on SeaDrop.
ISeaDrop(seaDropImpl).updateAllowList(allowListData);
}
/**
* @notice Update the token gated drop stage data for this nft contract
* on SeaDrop.
* Only the owner can use this function.
*
* Note: If two INonFungibleSeaDropToken tokens are doing
* simultaneous token gated drop promotions for each other,
* they can be minted by the same actor until
* `maxTokenSupplyForStage` is reached. Please ensure the
* `allowedNftToken` is not running an active drop during the
* `dropStage` time period.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param allowedNftToken The allowed nft token.
* @param dropStage The token gated drop stage data.
*/
function updateTokenGatedDrop(
address seaDropImpl,
address allowedNftToken,
TokenGatedDropStage calldata dropStage
) external virtual override {
// Ensure the sender is only the owner or contract itself.
_onlyOwnerOrSelf();
// Ensure the SeaDrop is allowed.
_onlyAllowedSeaDrop(seaDropImpl);
// Update the token gated drop stage.
ISeaDrop(seaDropImpl).updateTokenGatedDrop(allowedNftToken, dropStage);
}
/**
* @notice Update the drop URI for this nft contract on SeaDrop.
* Only the owner can use this function.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param dropURI The new drop URI.
*/
function updateDropURI(address seaDropImpl, string calldata dropURI)
external
virtual
override
{
// Ensure the sender is only the owner or contract itself.
_onlyOwnerOrSelf();
// Ensure the SeaDrop is allowed.
_onlyAllowedSeaDrop(seaDropImpl);
// Update the drop URI.
ISeaDrop(seaDropImpl).updateDropURI(dropURI);
}
/**
* @notice Update the creator payout address for this nft contract on
* SeaDrop.
* Only the owner can set the creator payout address.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param payoutAddress The new payout address.
*/
function updateCreatorPayoutAddress(
address seaDropImpl,
address payoutAddress
) external {
// Ensure the sender is only the owner or contract itself.
_onlyOwnerOrSelf();
// Ensure the SeaDrop is allowed.
_onlyAllowedSeaDrop(seaDropImpl);
// Update the creator payout address.
ISeaDrop(seaDropImpl).updateCreatorPayoutAddress(payoutAddress);
}
/**
* @notice Update the allowed fee recipient for this nft contract
* on SeaDrop.
* Only the owner can set the allowed fee recipient.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param feeRecipient The new fee recipient.
* @param allowed If the fee recipient is allowed.
*/
function updateAllowedFeeRecipient(
address seaDropImpl,
address feeRecipient,
bool allowed
) external virtual {
// Ensure the sender is only the owner or contract itself.
_onlyOwnerOrSelf();
// Ensure the SeaDrop is allowed.
_onlyAllowedSeaDrop(seaDropImpl);
// Update the allowed fee recipient.
ISeaDrop(seaDropImpl).updateAllowedFeeRecipient(feeRecipient, allowed);
}
/**
* @notice Update the server-side signers for this nft contract
* on SeaDrop.
* Only the owner can use this function.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param signer The signer to update.
* @param signedMintValidationParams Minimum and maximum parameters to
* enforce for signed mints.
*/
function updateSignedMintValidationParams(
address seaDropImpl,
address signer,
SignedMintValidationParams memory signedMintValidationParams
) external virtual override {
// Ensure the sender is only the owner or contract itself.
_onlyOwnerOrSelf();
// Ensure the SeaDrop is allowed.
_onlyAllowedSeaDrop(seaDropImpl);
// Update the signer.
ISeaDrop(seaDropImpl).updateSignedMintValidationParams(
signer,
signedMintValidationParams
);
}
/**
* @notice Update the allowed payers for this nft contract on SeaDrop.
* Only the owner can use this function.
*
* @param seaDropImpl The allowed SeaDrop contract.
* @param payer The payer to update.
* @param allowed Whether the payer is allowed.
*/
function updatePayer(
address seaDropImpl,
address payer,
bool allowed
) external virtual override {
// Ensure the sender is only the owner or contract itself.
_onlyOwnerOrSelf();
// Ensure the SeaDrop is allowed.
_onlyAllowedSeaDrop(seaDropImpl);
// Update the payer.
ISeaDrop(seaDropImpl).updatePayer(payer, allowed);
}
/**
* @notice Returns a set of mint stats for the address.
* This assists SeaDrop in enforcing maxSupply,
* maxTotalMintableByWallet, and maxTokenSupplyForStage checks.
*
* @dev NOTE: Implementing contracts should always update these numbers
* before transferring any tokens with _safeMint() to mitigate
* consequences of malicious onERC721Received() hooks.
*
* @param minter The minter address.
*/
function getMintStats(address minter)
external
view
override
returns (
uint256 minterNumMinted,
uint256 currentTotalSupply,
uint256 maxSupply
)
{
minterNumMinted = _numberMinted(minter);
currentTotalSupply = _totalMinted();
maxSupply = _maxSupply;
}
/**
* @notice Returns whether the interface is supported.
*
* @param interfaceId The interface id to check against.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(IERC165, ERC721ContractMetadata)
returns (bool)
{
return
interfaceId == type(INonFungibleSeaDropToken).interfaceId ||
interfaceId == type(ISeaDropTokenContractMetadata).interfaceId ||
// ERC721ContractMetadata returns supportsInterface true for
// EIP-2981
// ERC721A returns supportsInterface true for
// ERC165, ERC721, ERC721Metadata
super.supportsInterface(interfaceId);
}
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom}
* for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
* - The `operator` must be allowed.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool approved)
public
override
onlyAllowedOperatorApproval(operator)
{
super.setApprovalForAll(operator, approved);
}
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the
* zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
* - The `operator` mut be allowed.
*
* Emits an {Approval} event.
*/
function approve(address operator, uint256 tokenId)
public payable
override
onlyAllowedOperatorApproval(operator)
{
super.approve(operator, tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
* - The operator must be allowed.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public payable override onlyAllowedOperator(from) {
super.transferFrom(from, to, tokenId);
}
/**
* @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public payable override onlyAllowedOperator(from) {
super.safeTransferFrom(from, to, tokenId);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
* - The operator must be allowed.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory data
) public payable override onlyAllowedOperator(from) {
super.safeTransferFrom(from, to, tokenId, data);
}
/**
* @notice Configure multiple properties at a time.
*
* Note: The individual configure methods should be used
* to unset or reset any properties to zero, as this method
* will ignore zero-value properties in the config struct.
*
* @param config The configuration struct.
*/
function multiConfigure(MultiConfigureStruct calldata config)
external
onlyOwner
{
if (config.maxSupply > 0) {
this.setMaxSupply(config.maxSupply);
}
if (bytes(config.baseURI).length != 0) {
this.setBaseURI(config.baseURI);
}
if (bytes(config.contractURI).length != 0) {
this.setContractURI(config.contractURI);
}
if (
_cast(config.publicDrop.startTime != 0) |
_cast(config.publicDrop.endTime != 0) ==
1
) {
this.updatePublicDrop(config.seaDropImpl, config.publicDrop);
}
if (bytes(config.dropURI).length != 0) {
this.updateDropURI(config.seaDropImpl, config.dropURI);
}
if (config.allowListData.merkleRoot != bytes32(0)) {
this.updateAllowList(config.seaDropImpl, config.allowListData);
}
if (config.creatorPayoutAddress != address(0)) {
this.updateCreatorPayoutAddress(
config.seaDropImpl,
config.creatorPayoutAddress
);
}
if (config.provenanceHash != bytes32(0)) {
this.setProvenanceHash(config.provenanceHash);
}
if (config.allowedFeeRecipients.length > 0) {
for (uint256 i = 0; i < config.allowedFeeRecipients.length; ) {
this.updateAllowedFeeRecipient(
config.seaDropImpl,
config.allowedFeeRecipients[i],
true
);
unchecked {
++i;
}
}
}
if (config.disallowedFeeRecipients.length > 0) {
for (uint256 i = 0; i < config.disallowedFeeRecipients.length; ) {
this.updateAllowedFeeRecipient(
config.seaDropImpl,
config.disallowedFeeRecipients[i],
false
);
unchecked {
++i;
}
}
}
if (config.allowedPayers.length > 0) {
for (uint256 i = 0; i < config.allowedPayers.length; ) {
this.updatePayer(
config.seaDropImpl,
config.allowedPayers[i],
true
);
unchecked {
++i;
}
}
}
if (config.disallowedPayers.length > 0) {
for (uint256 i = 0; i < config.disallowedPayers.length; ) {
this.updatePayer(
config.seaDropImpl,
config.disallowedPayers[i],
false
);
unchecked {
++i;
}
}
}
if (config.tokenGatedDropStages.length > 0) {
if (
config.tokenGatedDropStages.length !=
config.tokenGatedAllowedNftTokens.length
) {
revert TokenGatedMismatch();
}
for (uint256 i = 0; i < config.tokenGatedDropStages.length; ) {
this.updateTokenGatedDrop(
config.seaDropImpl,
config.tokenGatedAllowedNftTokens[i],
config.tokenGatedDropStages[i]
);
unchecked {
++i;
}
}
}
if (config.disallowedTokenGatedAllowedNftTokens.length > 0) {
for (
uint256 i = 0;
i < config.disallowedTokenGatedAllowedNftTokens.length;
) {
TokenGatedDropStage memory emptyStage;
this.updateTokenGatedDrop(
config.seaDropImpl,
config.disallowedTokenGatedAllowedNftTokens[i],
emptyStage
);
unchecked {
++i;
}
}
}
if (config.signedMintValidationParams.length > 0) {
if (
config.signedMintValidationParams.length !=
config.signers.length
) {
revert SignersMismatch();
}
for (
uint256 i = 0;
i < config.signedMintValidationParams.length;
) {
this.updateSignedMintValidationParams(
config.seaDropImpl,
config.signers[i],
config.signedMintValidationParams[i]
);
unchecked {
++i;
}
}
}
if (config.disallowedSigners.length > 0) {
for (uint256 i = 0; i < config.disallowedSigners.length; ) {
SignedMintValidationParams memory emptyParams;
this.updateSignedMintValidationParams(
config.seaDropImpl,
config.disallowedSigners[i],
emptyParams
);
unchecked {
++i;
}
}
}
}
}
{
"compilationTarget": {
"DinoTheDiamond.sol": "DinoTheDiamond"
},
"evmVersion": "shanghai",
"libraries": {},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": true,
"runs": 200
},
"remappings": []
}
[{"inputs":[{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"symbol","type":"string"},{"internalType":"address[]","name":"allowedSeaDrop","type":"address[]"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"ApprovalCallerNotOwnerNorApproved","type":"error"},{"inputs":[],"name":"ApprovalQueryForNonexistentToken","type":"error"},{"inputs":[],"name":"BalanceQueryForZeroAddress","type":"error"},{"inputs":[{"internalType":"uint256","name":"newMaxSupply","type":"uint256"}],"name":"CannotExceedMaxSupplyOfUint64","type":"error"},{"inputs":[{"internalType":"uint256","name":"basisPoints","type":"uint256"}],"name":"InvalidRoyaltyBasisPoints","type":"error"},{"inputs":[],"name":"MintERC2309QuantityExceedsLimit","type":"error"},{"inputs":[{"internalType":"uint256","name":"total","type":"uint256"},{"internalType":"uint256","name":"maxSupply","type":"uint256"}],"name":"MintQuantityExceedsMaxSupply","type":"error"},{"inputs":[],"name":"MintToZeroAddress","type":"error"},{"inputs":[],"name":"MintZeroQuantity","type":"error"},{"inputs":[],"name":"OnlyAllowedSeaDrop","type":"error"},{"inputs":[],"name":"OnlyOwner","type":"error"},{"inputs":[{"internalType":"address","name":"operator","type":"address"}],"name":"OperatorNotAllowed","type":"error"},{"inputs":[],"name":"OwnerQueryForNonexistentToken","type":"error"},{"inputs":[],"name":"OwnershipNotInitializedForExtraData","type":"error"},{"inputs":[],"name":"ProvenanceHashCannotBeSetAfterMintStarted","type":"error"},{"inputs":[],"name":"RoyaltyAddressCannotBeZeroAddress","type":"error"},{"inputs":[],"name":"SignersMismatch","type":"error"},{"inputs":[],"name":"TokenGatedMismatch","type":"error"},{"inputs":[],"name":"TransferCallerNotOwnerNorApproved","type":"error"},{"inputs":[],"name":"TransferFromIncorrectOwner","type":"error"},{"inputs":[],"name":"TransferToNonERC721ReceiverImplementer","type":"error"},{"inputs":[],"name":"TransferToZeroAddress","type":"error"},{"inputs":[],"name":"URIQueryForNonexistentToken","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address[]","name":"allowedSeaDrop","type":"address[]"}],"name":"AllowedSeaDropUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"approved","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"_fromTokenId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_toTokenId","type":"uint256"}],"name":"BatchMetadataUpdate","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"fromTokenId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"toTokenId","type":"uint256"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"}],"name":"ConsecutiveTransfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"string","name":"newContractURI","type":"string"}],"name":"ContractURIUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"newMaxSupply","type":"uint256"}],"name":"MaxSupplyUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bytes32","name":"previousHash","type":"bytes32"},{"indexed":false,"internalType":"bytes32","name":"newHash","type":"bytes32"}],"name":"ProvenanceHashUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"bps","type":"uint256"}],"name":"RoyaltyInfoUpdated","type":"event"},{"anonymous":false,"inputs":[],"name":"SeaDropTokenDeployed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"OPERATOR_FILTER_REGISTRY","outputs":[{"internalType":"contract IOperatorFilterRegistry","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address[]","name":"recipients","type":"address[]"},{"internalType":"uint256[]","name":"quantities","type":"uint256[]"}],"name":"airdrop","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"baseURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"contractURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"fromTokenId","type":"uint256"},{"internalType":"uint256","name":"toTokenId","type":"uint256"}],"name":"emitBatchMetadataUpdate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"minter","type":"address"}],"name":"getMintStats","outputs":[{"internalType":"uint256","name":"minterNumMinted","type":"uint256"},{"internalType":"uint256","name":"currentTotalSupply","type":"uint256"},{"internalType":"uint256","name":"maxSupply","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isPaused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"minter","type":"address"},{"internalType":"uint256","name":"quantity","type":"uint256"}],"name":"mintSeaDrop","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint256","name":"maxSupply","type":"uint256"},{"internalType":"string","name":"baseURI","type":"string"},{"internalType":"string","name":"contractURI","type":"string"},{"internalType":"address","name":"seaDropImpl","type":"address"},{"components":[{"internalType":"uint80","name":"mintPrice","type":"uint80"},{"internalType":"uint48","name":"startTime","type":"uint48"},{"internalType":"uint48","name":"endTime","type":"uint48"},{"internalType":"uint16","name":"maxTotalMintableByWallet","type":"uint16"},{"internalType":"uint16","name":"feeBps","type":"uint16"},{"internalType":"bool","name":"restrictFeeRecipients","type":"bool"}],"internalType":"struct PublicDrop","name":"publicDrop","type":"tuple"},{"internalType":"string","name":"dropURI","type":"string"},{"components":[{"internalType":"bytes32","name":"merkleRoot","type":"bytes32"},{"internalType":"string[]","name":"publicKeyURIs","type":"string[]"},{"internalType":"string","name":"allowListURI","type":"string"}],"internalType":"struct AllowListData","name":"allowListData","type":"tuple"},{"internalType":"address","name":"creatorPayoutAddress","type":"address"},{"internalType":"bytes32","name":"provenanceHash","type":"bytes32"},{"internalType":"address[]","name":"allowedFeeRecipients","type":"address[]"},{"internalType":"address[]","name":"disallowedFeeRecipients","type":"address[]"},{"internalType":"address[]","name":"allowedPayers","type":"address[]"},{"internalType":"address[]","name":"disallowedPayers","type":"address[]"},{"internalType":"address[]","name":"tokenGatedAllowedNftTokens","type":"address[]"},{"components":[{"internalType":"uint80","name":"mintPrice","type":"uint80"},{"internalType":"uint16","name":"maxTotalMintableByWallet","type":"uint16"},{"internalType":"uint48","name":"startTime","type":"uint48"},{"internalType":"uint48","name":"endTime","type":"uint48"},{"internalType":"uint8","name":"dropStageIndex","type":"uint8"},{"internalType":"uint32","name":"maxTokenSupplyForStage","type":"uint32"},{"internalType":"uint16","name":"feeBps","type":"uint16"},{"internalType":"bool","name":"restrictFeeRecipients","type":"bool"}],"internalType":"struct TokenGatedDropStage[]","name":"tokenGatedDropStages","type":"tuple[]"},{"internalType":"address[]","name":"disallowedTokenGatedAllowedNftTokens","type":"address[]"},{"internalType":"address[]","name":"signers","type":"address[]"},{"components":[{"internalType":"uint80","name":"minMintPrice","type":"uint80"},{"internalType":"uint24","name":"maxMaxTotalMintableByWallet","type":"uint24"},{"internalType":"uint40","name":"minStartTime","type":"uint40"},{"internalType":"uint40","name":"maxEndTime","type":"uint40"},{"internalType":"uint40","name":"maxMaxTokenSupplyForStage","type":"uint40"},{"internalType":"uint16","name":"minFeeBps","type":"uint16"},{"internalType":"uint16","name":"maxFeeBps","type":"uint16"}],"internalType":"struct SignedMintValidationParams[]","name":"signedMintValidationParams","type":"tuple[]"},{"internalType":"address[]","name":"disallowedSigners","type":"address[]"}],"internalType":"struct ERC721SeaDropStructsErrorsAndEvents.MultiConfigureStruct","name":"config","type":"tuple"}],"name":"multiConfigure","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"provenanceHash","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"royaltyAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"royaltyBasisPoints","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"_salePrice","type":"uint256"}],"name":"royaltyInfo","outputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"royaltyAmount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"newBaseURI","type":"string"}],"name":"setBaseURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"newContractURI","type":"string"}],"name":"setContractURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newMaxSupply","type":"uint256"}],"name":"setMaxSupply","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"newProvenanceHash","type":"bytes32"}],"name":"setProvenanceHash","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"royaltyAddress","type":"address"},{"internalType":"uint96","name":"royaltyBps","type":"uint96"}],"internalType":"struct ISeaDropTokenContractMetadata.RoyaltyInfo","name":"newInfo","type":"tuple"}],"name":"setRoyaltyInfo","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"toggleIsPaused","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"seaDropImpl","type":"address"},{"components":[{"internalType":"bytes32","name":"merkleRoot","type":"bytes32"},{"internalType":"string[]","name":"publicKeyURIs","type":"string[]"},{"internalType":"string","name":"allowListURI","type":"string"}],"internalType":"struct AllowListData","name":"allowListData","type":"tuple"}],"name":"updateAllowList","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"seaDropImpl","type":"address"},{"internalType":"address","name":"feeRecipient","type":"address"},{"internalType":"bool","name":"allowed","type":"bool"}],"name":"updateAllowedFeeRecipient","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"allowedSeaDrop","type":"address[]"}],"name":"updateAllowedSeaDrop","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"seaDropImpl","type":"address"},{"internalType":"address","name":"payoutAddress","type":"address"}],"name":"updateCreatorPayoutAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"seaDropImpl","type":"address"},{"internalType":"string","name":"dropURI","type":"string"}],"name":"updateDropURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"seaDropImpl","type":"address"},{"internalType":"address","name":"payer","type":"address"},{"internalType":"bool","name":"allowed","type":"bool"}],"name":"updatePayer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"seaDropImpl","type":"address"},{"components":[{"internalType":"uint80","name":"mintPrice","type":"uint80"},{"internalType":"uint48","name":"startTime","type":"uint48"},{"internalType":"uint48","name":"endTime","type":"uint48"},{"internalType":"uint16","name":"maxTotalMintableByWallet","type":"uint16"},{"internalType":"uint16","name":"feeBps","type":"uint16"},{"internalType":"bool","name":"restrictFeeRecipients","type":"bool"}],"internalType":"struct PublicDrop","name":"publicDrop","type":"tuple"}],"name":"updatePublicDrop","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"seaDropImpl","type":"address"},{"internalType":"address","name":"signer","type":"address"},{"components":[{"internalType":"uint80","name":"minMintPrice","type":"uint80"},{"internalType":"uint24","name":"maxMaxTotalMintableByWallet","type":"uint24"},{"internalType":"uint40","name":"minStartTime","type":"uint40"},{"internalType":"uint40","name":"maxEndTime","type":"uint40"},{"internalType":"uint40","name":"maxMaxTokenSupplyForStage","type":"uint40"},{"internalType":"uint16","name":"minFeeBps","type":"uint16"},{"internalType":"uint16","name":"maxFeeBps","type":"uint16"}],"internalType":"struct SignedMintValidationParams","name":"signedMintValidationParams","type":"tuple"}],"name":"updateSignedMintValidationParams","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"seaDropImpl","type":"address"},{"internalType":"address","name":"allowedNftToken","type":"address"},{"components":[{"internalType":"uint80","name":"mintPrice","type":"uint80"},{"internalType":"uint16","name":"maxTotalMintableByWallet","type":"uint16"},{"internalType":"uint48","name":"startTime","type":"uint48"},{"internalType":"uint48","name":"endTime","type":"uint48"},{"internalType":"uint8","name":"dropStageIndex","type":"uint8"},{"internalType":"uint32","name":"maxTokenSupplyForStage","type":"uint32"},{"internalType":"uint16","name":"feeBps","type":"uint16"},{"internalType":"bool","name":"restrictFeeRecipients","type":"bool"}],"internalType":"struct TokenGatedDropStage","name":"dropStage","type":"tuple"}],"name":"updateTokenGatedDrop","outputs":[],"stateMutability":"nonpayable","type":"function"}]