// SPDX-License-Identifier: MIT
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/release-v4.9/contracts/token/ERC20/IERC20.sol

// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/release-v4.9/contracts/utils/Context.sol


// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/release-v4.9/contracts/access/Ownable.sol


// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/release-v4.9/contracts/security/ReentrancyGuard.sol


// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}

// File: bridge.sol

pragma solidity ^0.8.0;




contract PawBridgeV2 is Ownable, ReentrancyGuard {
    mapping(address => mapping(address => uint256)) private _deposits;
    mapping(address => bool) private _authorized; // Authorized addresses
    mapping(address => bool) private _whitelistedTokens; // Whitelisted tokens
    bool private _depositEnabled; // Variable to enable or disable deposits

    modifier onlyAuthorized() {
        require(_authorized[msg.sender], "Caller is not authorized");
        _;
    }

    modifier onlyWhitelistedToken(address token) {
        require(_whitelistedTokens[token], "Token is not whitelisted");
        _;
    }

    modifier whenDepositEnabled() {
        require(_depositEnabled, "Deposits are disabled");
        _;
    }

    constructor() {
        _authorized[msg.sender] = true; // Owner is authorized by default
        _depositEnabled = true; // Deposits are enabled by default
    }

    function authorizeAddress(address _addr, bool _status) external onlyOwner {
        _authorized[_addr] = _status; // Owner can add new authorizers
    }

    function whitelistToken(address token, bool status) external onlyOwner {
        _whitelistedTokens[token] = status; // Owner can change whitelist status of the tokens
    }

    function whitelistTokenbyAuthorized(address token, bool status) external onlyAuthorized {
        _whitelistedTokens[token] = status; // Authorized can change whitelist status of tokens
    }

    function enableDeposits() external onlyOwner {
        _depositEnabled = true;
    }

    function disableDeposits() external onlyOwner {
        _depositEnabled = false;
    }

    function depositToken(address token, uint256 amount) 
        external 
        payable 
        nonReentrant 
        onlyWhitelistedToken(token) 
        whenDepositEnabled 
    {
        if (token == address(0)) {
            require(msg.value == amount, "Incorrect native currency amount");
        } else {
            require(msg.value == 0, "Native currency not accepted for ERC20 token deposit");
            require(IERC20(token).transferFrom(msg.sender, address(this), amount), "Transfer failed");
        }
        _deposits[token][msg.sender] += amount;
    }

    function emergencyWithdraw(address token, uint256 amount) external onlyOwner nonReentrant {
        if (token == address(0)) {
            require(address(this).balance >= amount, "Insufficient native currency balance");
            payable(msg.sender).transfer(amount);
        } else {
            require(IERC20(token).balanceOf(address(this)) >= amount, "Insufficient token balance");
            require(IERC20(token).transfer(msg.sender, amount), "Transfer failed");
        }
    }

    function unlockToken(address token, address to, uint256 amount) 
        external 
        onlyAuthorized 
        nonReentrant 
        onlyWhitelistedToken(token) 
    {
        require(amount > 0, "Amount must be greater than zero");
        if (token == address(0)) {
            require(address(this).balance >= amount, "Insufficient native currency balance");
            payable(to).transfer(amount);
        } else {
            uint256 contractBalance = IERC20(token).balanceOf(address(this));
            require(contractBalance >= amount, "Insufficient token balance");
            require(IERC20(token).transfer(to, amount), "Transfer failed");
        }
    }

    function getDepositAmount(address token, address depositor) external view returns (uint256) {
        return _deposits[token][depositor];
    }

    // Function to receive Ether. msg.data must be empty
    receive() external payable {}

    // Fallback function is called when msg.data is not empty
    fallback() external payable {}
}

{
  "compilationTarget": {
    "PawBridgeV2.sol": "PawBridgeV2"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}