IBTC Blockchain

pragma solidity 0.5.15;


library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, "SafeMath: division by zero");
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "SafeMath: modulo by zero");
        return a % b;
    }
}

contract ERC20 {
    using SafeMath for uint256;

    string public name;
    string public symbol;
    string public desc;
    uint8 public decimals;

    mapping (address => uint256) _balances;

    mapping (address => mapping (address => uint256)) _allowances;

    uint256 _totalSupply;

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `TokenOwner` is set by
     * a call to `approve`. `value` is the new allowance.
     */
    event Approval(address indexed TokenOwner, address indexed spender, uint256 value);

    /**
     * @dev See `IERC20.totalSupply`.
     */
    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See `IERC20.balanceOf`.
     */
    function balanceOf(address account) public view returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See `IERC20.transfer`.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public returns (bool) {
        _transfer(msg.sender, recipient, amount);
        return true;
    }

    /**
     * @dev See `IERC20.allowance`.
     */
    function allowance(address TokenOwner, address spender) public view returns (uint256) {
        return _allowances[TokenOwner][spender];
    }

    /**
     * @dev See `IERC20.approve`.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public returns (bool) {
        _approve(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev See `IERC20.transferFrom`.
     *
     * Emits an `Approval` event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of `ERC20`;
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `value`.
     * - the caller must have allowance for `sender`'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
        require(_allowances[sender][msg.sender] >= amount, "ERC20: Not enough in deligation");
        _transfer(sender, recipient, amount);
        _approve(sender, msg.sender, _allowances[sender][msg.sender].sub(amount));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to `approve` that can be used as a mitigation for
     * problems described in `IERC20.approve`.
     *
     * Emits an `Approval` event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        _approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to `approve` that can be used as a mitigation for
     * problems described in `IERC20.approve`.
     *
     * Emits an `Approval` event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        _approve(msg.sender, spender, _allowances[msg.sender][spender].sub(subtractedValue));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to `transfer`, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a `Transfer` event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        require(_balances[sender] >= amount, "ERC20: Not Enough balance");

        _balances[sender] = _balances[sender].sub(amount);
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a `Transfer` event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal {
        require(account != address(0), "ERC20: mint to the zero address");

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
    * @dev Destroys `amount` tokens from `account`, reducing the
    * total supply.
    *
    * Emits a `Transfer` event with `to` set to the zero address.
    *
    * Requirements
    *
    * - `account` cannot be the zero address.
    * - `account` must have at least `amount` tokens.
    */
    function _burn(address account, uint256 value) internal {
        require(account != address(0), "ERC20: burn from the zero address");

        _totalSupply = _totalSupply.sub(value);
        _balances[account] = _balances[account].sub(value);
        emit Transfer(account, address(0), value);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `TokenOwner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an `Approval` event.
     *
     * Requirements:
     *
     * - `TokenOwner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address TokenOwner, address spender, uint256 value) internal {
        require(TokenOwner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[TokenOwner][spender] = value;
        emit Approval(TokenOwner, spender, value);
    }

    /**
     * @dev Destroys `amount` tokens from `account`.`amount` is then deducted
     * from the caller's allowance.
     *
     * See `_burn` and `_approve`.
     */
    function _burnFrom(address account, uint256 amount) internal {
        _burn(account, amount);
        _approve(account, msg.sender, _allowances[account][msg.sender].sub(amount));
    }
}

contract Owner {

    address public OwnerAddress;

    modifier isOwner(){
        require( msg.sender == OwnerAddress);
        _;
    }

    function changeOwner ( address _newAddress )
        isOwner
        public
        returns ( bool )
    {
        OwnerAddress = _newAddress;
        return true;
    }

}

contract IBTCToken is ERC20 , Owner{

    address public TAddr;

    modifier isTreasury(){
        require(msg.sender == TAddr);
        _;
    }

    constructor(  )
        public
    {
        name = "IBTC Blockchain";
        symbol = "IBTC";
        desc = "IBTC Blockchain";
        decimals = 18;
        OwnerAddress = msg.sender;
    }

    function setTreasury ( address _TAddres )
        isOwner
        public
        returns ( bool )
    {
        TAddr = _TAddres;
        return true;
    }

    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    function balanceOf(address account) public view returns (uint256) {
        return _balances[account];
    }

    function mint(address recipient, uint256 amount)
        isTreasury
        public
        returns (bool result )
    {
        _mint( recipient , amount );
        result = true;
    }

    function transfer(address recipient, uint256 amount)
        public
        returns (bool result )
    {
        _transfer(msg.sender, recipient , amount );
        result = true;
    }

    function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
        require(_allowances[sender][msg.sender] >= amount, "ERC20: Not enough in deligation");
        _transfer(msg.sender, recipient , amount );
        _approve(sender, msg.sender, _allowances[sender][msg.sender].sub(amount));
        return true;
    }


    function allowance(address TokenOwner, address spender) public view returns (uint256) {
        return _allowances[TokenOwner][spender];
    }

    function approve(address spender, uint256 value) public returns (bool) {
        _approve(msg.sender, spender, value);
        return true;
    }

    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        _approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
        return true;
    }

    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        _approve(msg.sender, spender, _allowances[msg.sender][spender].sub(subtractedValue));
        return true;
    }

}

{
  "compilationTarget": {
    "IBTCToken.sol": "IBTCToken"
  },
  "evmVersion": "byzantium",
  "libraries": {},
  "optimizer": {
    "enabled": true,
    "runs": 500
  },
  "remappings": []
}