// SPDX-License-Identifier: GPL-3.0-or-later Or MIT
// File: contracts\SafeMath.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: contracts\IBEP20.sol

pragma solidity >=0.6.4;

interface IBEP20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the token decimals.
     */
    function decimals() external view returns (uint8);

    /**
     * @dev Returns the token symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the token name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the bep token owner.
     */
    function getOwner() external view returns (address);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address _owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: contracts\Address.sol



pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: contracts\SafeBEP20.sol



pragma solidity >=0.6.0 <0.8.0;




/**
 * @title SafeBEP20
 * @dev Wrappers around BEP20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeBEP20 for IBEP20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeBEP20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IBEP20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IBEP20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IBEP20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IBEP20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeBEP20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IBEP20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IBEP20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeBEP20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IBEP20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeBEP20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeBEP20: BEP20 operation did not succeed");
        }
    }
}

// File: contracts\Context.sol



pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: contracts\Ownable.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: contracts\IWukongReferral.sol



pragma solidity 0.6.12;

interface IWukongReferral {
    /**
     * @dev Record referral.
     */
    function recordReferral(address user, address referrer) external;

    /**
     * @dev Record referral commission.
     */
    function recordReferralCommission(address referrer, uint256 commission) external;

    /**
     * @dev Get the referrer address that referred the user.
     */
    function getReferrer(address user) external view returns (address);
}

// File: @openzeppelin\contracts\utils\ReentrancyGuard.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// File: contracts\BEP20.sol



pragma solidity >=0.4.0;





/**
 * @dev Implementation of the {IBEP20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {BEP20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-BEP20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of BEP20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IBEP20-approve}.
 */
contract BEP20 is Context, IBEP20, Ownable {
    using SafeMath for uint256;

    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the bep token owner.
     */
    function getOwner() external override view returns (address) {
        return owner();
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public override view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public override view returns (string memory) {
        return _symbol;
    }

    /**
    * @dev Returns the number of decimals used to get its user representation.
    */
    function decimals() public override view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {BEP20-totalSupply}.
     */
    function totalSupply() public override view returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {BEP20-balanceOf}.
     */
    function balanceOf(address account) public override view returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {BEP20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {BEP20-allowance}.
     */
    function allowance(address owner, address spender) public override view returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {BEP20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {BEP20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {BEP20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for `sender`'s tokens of at least
     * `amount`.
     */
    function transferFrom (address sender, address recipient, uint256 amount) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            _msgSender(),
            _allowances[sender][_msgSender()].sub(amount, 'BEP20: transfer amount exceeds allowance')
        );
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {BEP20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {BEP20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, 'BEP20: decreased allowance below zero'));
        return true;
    }

    /**
     * @dev Creates `amount` tokens and assigns them to `msg.sender`, increasing
     * the total supply.
     *
     * Requirements
     *
     * - `msg.sender` must be the token owner
     */
    function mint(uint256 amount) public onlyOwner returns (bool) {
        _mint(_msgSender(), amount);
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer (address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), 'BEP20: transfer from the zero address');
        require(recipient != address(0), 'BEP20: transfer to the zero address');

        _balances[sender] = _balances[sender].sub(amount, 'BEP20: transfer amount exceeds balance');
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal {
        require(account != address(0), 'BEP20: mint to the zero address');

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal {
        require(account != address(0), 'BEP20: burn from the zero address');

        _balances[account] = _balances[account].sub(amount, 'BEP20: burn amount exceeds balance');
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve (address owner, address spender, uint256 amount) internal {
        require(owner != address(0), 'BEP20: approve from the zero address');
        require(spender != address(0), 'BEP20: approve to the zero address');

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`.`amount` is then deducted
     * from the caller's allowance.
     *
     * See {_burn} and {_approve}.
     */
    function _burnFrom(address account, uint256 amount) internal {
        _burn(account, amount);
        _approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, 'BEP20: burn amount exceeds allowance'));
    }
}

// File: contracts\IUniswapV2Router01.sol

pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}

// File: contracts\IUniswapV2Router02.sol

pragma solidity >=0.6.2;


interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

// File: contracts\IUniswapV2Pair.sol

pragma solidity >=0.5.0;

interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}

// File: contracts\IUniswapV2Factory.sol

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}

// File: contracts\WUKONGToken.sol

pragma solidity 0.6.12;





library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            bytes32 lastvalue = set._values[lastIndex];

            // Move the last value to the index where the value to delete is
            set._values[toDeleteIndex] = lastvalue;
            // Update the index for the moved value
            set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        require(set._values.length > index, 'EnumerableSet: index out of bounds');
        return set._values[index];
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint256(_at(set._inner, index)));
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}

// MonkeyKing with Governance.
contract MonkeyKing is BEP20 {
    // Transfer tax rate in basis points. (default 1%)
    uint16 public transferTaxRate = 100;

    // Burn rate % of transfer tax. (default 20% x 1% = 0.2% of total amount).
    uint16 public burnRate = 20;
    // Max transfer tax rate: 10%.
    uint16 public constant MAXIMUM_TRANSFER_TAX_RATE = 1000;
    // Burn address
    address public constant BURN_ADDRESS = 0x000000000000000000000000000000000000dEaD;

    // Max transfer amount rate in basis points. (default is 0.00012% of total supply)
    uint16 public maxTransferAmountRate = 12;
    // Addresses that excluded from antiWhale
    mapping(address => bool) private _excludedFromAntiWhale;
    // Automatic swap and liquify enabled
    bool public swapAndLiquifyEnabled = false;    
    // Min amount to liquify. (default 500 WUKONGs)
    uint256 public minAmountToLiquify = 500 ether;
    // The swap router, modifiable. Will be changed to Wukong's router when our own AMM release
    IUniswapV2Router02 public wukongRouter;
    // The trading pair
    address public wukongPair;
    // In swap and liquify
    bool private _inSwapAndLiquify;

    // The operator can only update the transfer tax rate
    address private _operator;

    EnumerableSet.AddressSet private _minters;
    EnumerableSet.AddressSet private _blockAddrs;

    // Open Trade
    bool public tradingOpen;
    // Max Wallet Size
    uint256 public _maxWalletSize = 1000000*10**18; //1M

    // Events
    event OperatorTransferred(address indexed previousOperator, address indexed newOperator);
    event TransferTaxRateUpdated(address indexed operator, uint256 previousRate, uint256 newRate);
    event BurnRateUpdated(address indexed operator, uint256 previousRate, uint256 newRate);
    event MaxTransferAmountRateUpdated(address indexed operator, uint256 previousRate, uint256 newRate);
    event SwapAndLiquifyEnabledUpdated(address indexed operator, bool enabled);
    event MinAmountToLiquifyUpdated(address indexed operator, uint256 previousAmount, uint256 newAmount);
    event WukongRouterUpdated(address indexed operator, address indexed router, address indexed pair);
    event SwapAndLiquify(uint256 tokensSwapped, uint256 ethReceived, uint256 tokensIntoLiqudity);

    modifier onlyOperator() {
        require(_operator == msg.sender, "operator: caller is not the operator");
        _;
    }

    //Check all wale activity here
    modifier antiWhale(address sender, address recipient, uint256 amount) {
        if (
            _excludedFromAntiWhale[sender] == false
            && _excludedFromAntiWhale[recipient] == false
        ) {
            //Check Max Transfer
            require(amount <= maxTransferAmount(), "WUKONG::antiWhale: Transfer amount exceeds the maxTransferAmount");
            
            //Check Max Wallet at buy
            if(sender == wukongPair && recipient != address(wukongRouter)) {
                require(balanceOf(recipient) + amount < _maxWalletSize, "Balance exceeds wallet size!");
            }

            //Check open trade
            require(tradingOpen, "Trading is not open");
        }
        _;
    }

    modifier lockTheSwap {
        _inSwapAndLiquify = true;
        _;
        _inSwapAndLiquify = false;
    }

    modifier transferTaxFree {
        uint16 _transferTaxRate = transferTaxRate;
        transferTaxRate = 0;
        _;
        transferTaxRate = _transferTaxRate;
    }

    /**
     * @notice Constructs the WUKONG Token contract.
     */
    constructor() public BEP20("Monkey King", "WUKONG") {
        _operator = _msgSender();
        emit OperatorTransferred(address(0), _operator);

        _excludedFromAntiWhale[msg.sender] = true;
        _excludedFromAntiWhale[address(0)] = true;
        _excludedFromAntiWhale[address(this)] = true;
        _excludedFromAntiWhale[BURN_ADDRESS] = true;
    }

    /// @notice Creates `_amount` token to `_to`. Must only be called by the owner (MasterChef).
    function mint(address _to, uint256 _amount) public onlyMinter returns(bool) {
        _mint(_to, _amount);
        _moveDelegates(address(0), _delegates[_to], _amount);
        return true;
    }

    /// @dev overrides transfer function to meet tokenomics of WUKONG
    function _transfer(address sender, address recipient, uint256 amount) internal virtual override antiWhale(sender, recipient, amount) {
        require(sender != address(0), "WUKONG::sender is not valid");

        //Check Block Addr
        require(!isBlockAddr(sender), "sender can't be blockaddr");
        require(!isBlockAddr(recipient), "recipient can't be blockaddr");

        // swap and liquify
        if (
            swapAndLiquifyEnabled == true
            && _inSwapAndLiquify == false
            && address(wukongRouter) != address(0)
            && wukongPair != address(0)
            && sender != wukongPair
            && sender != owner()
        ) {
            swapAndLiquify();
        }

        if (recipient == BURN_ADDRESS || transferTaxRate == 0) {
            super._transfer(sender, recipient, amount);
            if (recipient != BURN_ADDRESS) {
                _moveDelegates(_delegates[sender], _delegates[recipient], amount);
            }
        } else {
            // default tax is 5% of every transfer
            uint256 taxAmount = amount.mul(transferTaxRate).div(10000);
            uint256 burnAmount = taxAmount.mul(burnRate).div(100);
            uint256 liquidityAmount = taxAmount.sub(burnAmount);
            require(taxAmount == burnAmount + liquidityAmount, "WUKONG::transfer: Burn value invalid");

            // default 95% of transfer sent to recipient
            uint256 sendAmount = amount.sub(taxAmount);
            require(amount == sendAmount + taxAmount, "WUKONG::transfer: Tax value invalid");

            super._transfer(sender, BURN_ADDRESS, burnAmount);
            super._transfer(sender, address(this), liquidityAmount);
            super._transfer(sender, recipient, sendAmount);
            _moveDelegates(_delegates[sender], _delegates[recipient], sendAmount);
            amount = sendAmount;
        }
    }

    /// @dev Swap and liquify
    function swapAndLiquify() private lockTheSwap transferTaxFree {
        uint256 contractTokenBalance = balanceOf(address(this));
        uint256 maxTransferAmount = maxTransferAmount();
        contractTokenBalance = contractTokenBalance > maxTransferAmount ? maxTransferAmount : contractTokenBalance;

        if (contractTokenBalance >= minAmountToLiquify) {
            // only min amount to liquify
            uint256 liquifyAmount = minAmountToLiquify;

            // split the liquify amount into halves
            uint256 half = liquifyAmount.div(2);
            uint256 otherHalf = liquifyAmount.sub(half);

            // capture the contract's current ETH balance.
            // this is so that we can capture exactly the amount of ETH that the
            // swap creates, and not make the liquidity event include any ETH that
            // has been manually sent to the contract
            uint256 initialBalance = address(this).balance;

            // swap tokens for ETH
            swapTokensForEth(half);

            // how much ETH did we just swap into?
            uint256 newBalance = address(this).balance.sub(initialBalance);

            // add liquidity
            addLiquidity(otherHalf, newBalance);

            emit SwapAndLiquify(half, newBalance, otherHalf);
        }
    }

    /// @dev Swap tokens for eth
    function swapTokensForEth(uint256 tokenAmount) private {
        // generate the wukong pair path of token -> weth
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = wukongRouter.WETH();

        _approve(address(this), address(wukongRouter), tokenAmount);

        // make the swap
        wukongRouter.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0, // accept any amount of ETH
            path,
            address(this),
            block.timestamp
        );
    }

    /// @dev Add liquidity
    function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
        // approve token transfer to cover all possible scenarios
        _approve(address(this), address(wukongRouter), tokenAmount);

        // add the liquidity
        wukongRouter.addLiquidityETH{value: ethAmount}(
            address(this),
            tokenAmount,
            0, // slippage is unavoidable
            0, // slippage is unavoidable
            operator(),
            block.timestamp
        );
    }

    /**
     * @dev Returns the max transfer amount.
     */
    function maxTransferAmount() public view returns (uint256) {
        return totalSupply().mul(maxTransferAmountRate).div(10000000);
    }

    /**
     * @dev Returns the address is excluded from antiWhale or not.
     */
    function isExcludedFromAntiWhale(address _account) public view returns (bool) {
        return _excludedFromAntiWhale[_account];
    }

    // To receive BNB from wukongRouter when swapping
    receive() external payable {}

    /**
     * @dev Update the transfer tax rate.
     * Can only be called by the current operator.
     */
    function updateTransferTaxRate(uint16 _transferTaxRate) public onlyOperator {
        require(_transferTaxRate <= MAXIMUM_TRANSFER_TAX_RATE, "WUKONG::updateTransferTaxRate: Transfer tax rate must not exceed the maximum rate.");
        emit TransferTaxRateUpdated(msg.sender, transferTaxRate, _transferTaxRate);
        transferTaxRate = _transferTaxRate;
    }

    /**
     * @dev Update the burn rate.
     * Can only be called by the current operator.
     */
    function updateBurnRate(uint16 _burnRate) public onlyOperator {
        require(_burnRate <= 100, "WUKONG::updateBurnRate: Burn rate must not exceed the maximum rate.");
        emit BurnRateUpdated(msg.sender, burnRate, _burnRate);
        burnRate = _burnRate;
    }

    /**
     * @dev Update the max transfer amount rate.
     * Can only be called by the current operator.
     */
    function updateMaxTransferAmountRate(uint16 _maxTransferAmountRate) public onlyOperator {
        require(_maxTransferAmountRate <= 10000, "WUKONG::updateMaxTransferAmountRate: Max transfer amount rate must not exceed the maximum rate.");
        emit MaxTransferAmountRateUpdated(msg.sender, maxTransferAmountRate, _maxTransferAmountRate);
        maxTransferAmountRate = _maxTransferAmountRate;
    }

    /**
     * @dev Update the min amount to liquify.
     * Can only be called by the current operator.
     */
    function updateMinAmountToLiquify(uint256 _minAmount) public onlyOperator {
        emit MinAmountToLiquifyUpdated(msg.sender, minAmountToLiquify, _minAmount);
        minAmountToLiquify = _minAmount;
    }

    /**
     * @dev Exclude or include an address from antiWhale.
     * Can only be called by the current operator.
     */
    function setExcludedFromAntiWhale(address _account, bool _excluded) public onlyOperator {
        _excludedFromAntiWhale[_account] = _excluded;
    }

    /**
     * @dev Update the swapAndLiquifyEnabled.
     * Can only be called by the current operator.
     */
    function updateSwapAndLiquifyEnabled(bool _enabled) public onlyOperator {
        emit SwapAndLiquifyEnabledUpdated(msg.sender, _enabled);
        swapAndLiquifyEnabled = _enabled;
    }

    /**
     * @dev Update the swap router.
     * Can only be called by the current operator.
     */
    function updateWukongRouter(address _router) public onlyOperator {
        wukongRouter = IUniswapV2Router02(_router);
        wukongPair = IUniswapV2Factory(wukongRouter.factory()).getPair(address(this), wukongRouter.WETH());
        require(wukongPair != address(0), "WUKONG::updateWukongRouter: Invalid pair address.");
        emit WukongRouterUpdated(msg.sender, address(wukongRouter), wukongPair);
    }

    /**
     * @dev Returns the address of the current operator.
     */
    function operator() public view returns (address) {
        return _operator;
    }

    /**
     * @dev Transfers operator of the contract to a new account (`newOperator`).
     * Can only be called by the current operator.
     */
    function transferOperator(address newOperator) public onlyOperator {
        require(newOperator != address(0), "WUKONG::transferOperator: new operator is the zero address");
        emit OperatorTransferred(_operator, newOperator);
        _operator = newOperator;
    }

    // Copied and modified from YAM code:
    // https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernanceStorage.sol
    // https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernance.sol
    // Which is copied and modified from COMPOUND:
    // https://github.com/compound-finance/compound-protocol/blob/master/contracts/Governance/Comp.sol

    /// @dev A record of each accounts delegate
    mapping (address => address) internal _delegates;

    /// @notice A checkpoint for marking number of votes from a given block
    struct Checkpoint {
        uint32 fromBlock;
        uint256 votes;
    }

    /// @notice A record of votes checkpoints for each account, by index
    mapping (address => mapping (uint32 => Checkpoint)) public checkpoints;

    /// @notice The number of checkpoints for each account
    mapping (address => uint32) public numCheckpoints;

    /// @notice The EIP-712 typehash for the contract's domain
    bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)");

    /// @notice The EIP-712 typehash for the delegation struct used by the contract
    bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");

    /// @notice A record of states for signing / validating signatures
    mapping (address => uint) public nonces;

      /// @notice An event thats emitted when an account changes its delegate
    event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);

    /// @notice An event thats emitted when a delegate account's vote balance changes
    event DelegateVotesChanged(address indexed delegate, uint previousBalance, uint newBalance);

    /**
     * @notice Delegate votes from `msg.sender` to `delegatee`
     * @param delegator The address to get delegatee for
     */
    function delegates(address delegator)
        external
        view
        returns (address)
    {
        return _delegates[delegator];
    }

   /**
    * @notice Delegate votes from `msg.sender` to `delegatee`
    * @param delegatee The address to delegate votes to
    */
    function delegate(address delegatee) external {
        return _delegate(msg.sender, delegatee);
    }

    /**
     * @notice Delegates votes from signatory to `delegatee`
     * @param delegatee The address to delegate votes to
     * @param nonce The contract state required to match the signature
     * @param expiry The time at which to expire the signature
     * @param v The recovery byte of the signature
     * @param r Half of the ECDSA signature pair
     * @param s Half of the ECDSA signature pair
     */
    function delegateBySig(
        address delegatee,
        uint nonce,
        uint expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    )
        external
    {
        bytes32 domainSeparator = keccak256(
            abi.encode(
                DOMAIN_TYPEHASH,
                keccak256(bytes(name())),
                getChainId(),
                address(this)
            )
        );

        bytes32 structHash = keccak256(
            abi.encode(
                DELEGATION_TYPEHASH,
                delegatee,
                nonce,
                expiry
            )
        );

        bytes32 digest = keccak256(
            abi.encodePacked(
                "\x19\x01",
                domainSeparator,
                structHash
            )
        );

        address signatory = ecrecover(digest, v, r, s);
        require(signatory != address(0), "WUKONG::delegateBySig: invalid signature");
        require(nonce == nonces[signatory]++, "WUKONG::delegateBySig: invalid nonce");
        require(now <= expiry, "WUKONG::delegateBySig: signature expired");
        return _delegate(signatory, delegatee);
    }

    /**
     * @notice Gets the current votes balance for `account`
     * @param account The address to get votes balance
     * @return The number of current votes for `account`
     */
    function getCurrentVotes(address account)
        external
        view
        returns (uint256)
    {
        uint32 nCheckpoints = numCheckpoints[account];
        return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0;
    }

    /**
     * @notice Determine the prior number of votes for an account as of a block number
     * @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
     * @param account The address of the account to check
     * @param blockNumber The block number to get the vote balance at
     * @return The number of votes the account had as of the given block
     */
    function getPriorVotes(address account, uint blockNumber)
        external
        view
        returns (uint256)
    {
        require(blockNumber < block.number, "WUKONG::getPriorVotes: not yet determined");

        uint32 nCheckpoints = numCheckpoints[account];
        if (nCheckpoints == 0) {
            return 0;
        }

        // First check most recent balance
        if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) {
            return checkpoints[account][nCheckpoints - 1].votes;
        }

        // Next check implicit zero balance
        if (checkpoints[account][0].fromBlock > blockNumber) {
            return 0;
        }

        uint32 lower = 0;
        uint32 upper = nCheckpoints - 1;
        while (upper > lower) {
            uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow
            Checkpoint memory cp = checkpoints[account][center];
            if (cp.fromBlock == blockNumber) {
                return cp.votes;
            } else if (cp.fromBlock < blockNumber) {
                lower = center;
            } else {
                upper = center - 1;
            }
        }
        return checkpoints[account][lower].votes;
    }

    function _delegate(address delegator, address delegatee)
        internal
    {
        address currentDelegate = _delegates[delegator];
        uint256 delegatorBalance = balanceOf(delegator); // balance of underlying WUKONGs (not scaled);
        _delegates[delegator] = delegatee;

        emit DelegateChanged(delegator, currentDelegate, delegatee);

        _moveDelegates(currentDelegate, delegatee, delegatorBalance);
    }

    function _moveDelegates(address srcRep, address dstRep, uint256 amount) internal {
        if (srcRep != dstRep && amount > 0) {
            if (srcRep != address(0)) {
                // decrease old representative
                uint32 srcRepNum = numCheckpoints[srcRep];
                uint256 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0;
                uint256 srcRepNew = srcRepOld.sub(amount);
                _writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew);
            }

            if (dstRep != address(0)) {
                // increase new representative
                uint32 dstRepNum = numCheckpoints[dstRep];
                uint256 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0;
                uint256 dstRepNew = dstRepOld.add(amount);
                _writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew);
            }
        }
    }

    function _writeCheckpoint(
        address delegatee,
        uint32 nCheckpoints,
        uint256 oldVotes,
        uint256 newVotes
    )
        internal
    {
        uint32 blockNumber = safe32(block.number, "WUKONG::_writeCheckpoint: block number exceeds 32 bits");

        if (nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber) {
            checkpoints[delegatee][nCheckpoints - 1].votes = newVotes;
        } else {
            checkpoints[delegatee][nCheckpoints] = Checkpoint(blockNumber, newVotes);
            numCheckpoints[delegatee] = nCheckpoints + 1;
        }

        emit DelegateVotesChanged(delegatee, oldVotes, newVotes);
    }

    function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
        require(n < 2**32, errorMessage);
        return uint32(n);
    }

    function getChainId() internal pure returns (uint) {
        uint256 chainId;
        assembly { chainId := chainid() }
        return chainId;
    }

    function addMinter(address _addMinter) public onlyOwner returns (bool) {
        require(_addMinter != address(0), "WUKONG: _addMinter is the zero address");
        return EnumerableSet.add(_minters, _addMinter);
    }

    function delMinter(address _delMinter) public onlyOwner returns (bool) {
        require(_delMinter != address(0), "WUKONG: _delMinter is the zero address");
        return EnumerableSet.remove(_minters, _delMinter);
    }

    function getMinterLength() public view returns (uint256) {
        return EnumerableSet.length(_minters);
    }

    function isMinter(address account) public view returns (bool) {
        return EnumerableSet.contains(_minters, account);
    }

    function getMinter(uint256 _index) public view onlyOwner returns (address){
        require(_index <= getMinterLength() - 1, "WUKONG: index out of bounds");
        return EnumerableSet.at(_minters, _index);
    }

    // modifier for mint function
    modifier onlyMinter() {
        require(isMinter(msg.sender), "caller is not the minter");
        _;
    }
    
    function addBlockAddr(address _addBlockAddr) public onlyOwner returns (bool) {
        require(_addBlockAddr != address(0), "WUKONG: _addBlockAddr is the zero address");
        return EnumerableSet.add(_blockAddrs, _addBlockAddr);
    }

    function delBlockAddr(address _delblockAddr) public onlyOwner returns (bool) {
        require(_delblockAddr != address(0), "WUKONG: _delblockAddr is the zero address");
        return EnumerableSet.remove(_blockAddrs, _delblockAddr);
    }

    function getBlockAddrLength() public view returns (uint256) {
        return EnumerableSet.length(_blockAddrs);
    }

    function isBlockAddr(address account) public view returns (bool) {
        return EnumerableSet.contains(_blockAddrs, account);
    }

    function getBlockAddr(uint256 _index) public view onlyOwner returns (address){
        require(_index <= getBlockAddrLength() - 1, "WUKONG: index out of bounds");
        return EnumerableSet.at(_blockAddrs, _index);
    }

    // Set trading
    function setTrading(bool _tradingOpen) public onlyOwner {
        tradingOpen = _tradingOpen;
    }

    function setMaxWalletAmount(uint256 maxWalletSize) public onlyOwner() {
        _maxWalletSize = maxWalletSize;
    }

    // Airdrop
    function multiSend(address[] calldata addresses, uint256[] calldata amounts) external {
        require(addresses.length == amounts.length, "Must be the same length");
        for(uint256 i = 0; i < addresses.length; i++){
            _transfer(_msgSender(), addresses[i], amounts[i] * 10**18);
        }
    }

}

// File: contracts\WUKONGMasterChefV2.sol



pragma solidity 0.6.12;








// MasterChef is the master of Wukong. He can make Wukong and he is a fair guy.
//
// Note that it's ownable and the owner wields tremendous power. The ownership
// will be transferred to a governance smart contract once WUKONG is sufficiently
// distributed and the community can show to govern itself.
//
// Have fun reading it. Hopefully it's bug-free. God bless.
contract MasterChefV2 is Ownable, ReentrancyGuard {
    using SafeMath for uint256;
    using SafeBEP20 for IBEP20;

    // Info of each user.
    struct UserInfo {
        uint256 amount;         // How many LP tokens the user has provided.
        uint256 rewardDebt;     // Reward debt. See explanation below.
        uint256 rewardLockedUp;  // Reward locked up.
        uint256 nextHarvestUntil; // When can the user harvest again.
        //
        // We do some fancy math here. Basically, any point in time, the amount of WUKONGs
        // entitled to a user but is pending to be distributed is:
        //
        //   pending reward = (user.amount * pool.accWukongPerShare) - user.rewardDebt
        //
        // Whenever a user deposits or withdraws LP tokens to a pool. Here's what happens:
        //   1. The pool's `accWukongPerShare` (and `lastRewardBlock`) gets updated.
        //   2. User receives the pending reward sent to his/her address.
        //   3. User's `amount` gets updated.
        //   4. User's `rewardDebt` gets updated.
    }

    // Info of each pool.
    struct PoolInfo {
        IBEP20 lpToken;           // Address of LP token contract.
        uint256 allocPoint;       // How many allocation points assigned to this pool. WUKONGs to distribute per block.
        uint256 lastRewardBlock;  // Last block number that WUKONGs distribution occurs.
        uint256 accWukongPerShare;   // Accumulated WUKONGs per share, times 1e12. See below.
        uint16 depositFeeBP;      // Deposit fee in basis points
        uint256 harvestInterval;  // Harvest interval in seconds
    }

    // The WUKONG TOKEN!
    MonkeyKing public wukong;
    // Team address.
    address public teamAddr;
    // Team reward.
    uint256 public teamReward = 10;
    // Deposit Fee address
    address public feeAddress;
    // WUKONG tokens created per block.
    uint256 public wukongPerBlock;
    // Bonus muliplier for early wukong makers.
    uint256 public constant BONUS_MULTIPLIER = 1;
    // Max harvest interval: 14 days.
    uint256 public constant MAXIMUM_HARVEST_INTERVAL = 14 days;

    // Info of each pool.
    PoolInfo[] public poolInfo;
    // Info of each user that stakes LP tokens.
    mapping (uint256 => mapping (address => UserInfo)) public userInfo;
    // Total allocation points. Must be the sum of all allocation points in all pools.
    uint256 public totalAllocPoint = 0;
    // The block number when WUKONG mining starts.
    uint256 public startBlock;
    // Deposited amount WUKONG in MasterChef
    uint256 public depositedWukong;
    // Total locked up rewards
    uint256 public totalLockedUpRewards;

    // Wukong referral contract address.
    IWukongReferral public wukongReferral;
    // Referral commission rate in basis points.
    uint16 public referralCommissionRate = 100;
    // Max referral commission rate: 10%.
    uint16 public constant MAXIMUM_REFERRAL_COMMISSION_RATE = 1000;

    event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
    event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event EmissionRateUpdated(address indexed caller, uint256 previousAmount, uint256 newAmount);
    event ReferralCommissionPaid(address indexed user, address indexed referrer, uint256 commissionAmount);
    event RewardLockedUp(address indexed user, uint256 indexed pid, uint256 amountLockedUp);

    constructor(
        MonkeyKing _wukong,
        address _teamAddr,
        address _feeAddress,
        uint256 _wukongPerBlock,
        uint256 _startBlock
    ) public {
        wukong = _wukong;
        teamAddr = _teamAddr;
        feeAddress = _feeAddress;
        wukongPerBlock = _wukongPerBlock;
        startBlock = _startBlock;
    }

    function poolLength() external view returns (uint256) {
        return poolInfo.length;
    }

    // Add a new lp to the pool. Can only be called by the owner.
    // XXX DO NOT add the same LP token more than once. Rewards will be messed up if you do.
    function add(uint256 _allocPoint, IBEP20 _lpToken, uint16 _depositFeeBP, uint256 _harvestInterval, bool _withUpdate) public onlyOwner {
        require(_depositFeeBP <= 10000, "add: invalid deposit fee basis points");
        if (_withUpdate) {
            massUpdatePools();
        }
        uint256 lastRewardBlock = block.number > startBlock ? block.number : startBlock;
        totalAllocPoint = totalAllocPoint.add(_allocPoint);
        poolInfo.push(PoolInfo({
            lpToken: _lpToken,
            allocPoint: _allocPoint,
            lastRewardBlock: lastRewardBlock,
            accWukongPerShare: 0,
            depositFeeBP: _depositFeeBP,
            harvestInterval: _harvestInterval
        }));
    }

    // Update the given pool's WUKONG allocation point and deposit fee. Can only be called by the owner.
    function set(uint256 _pid, uint256 _allocPoint, uint16 _depositFeeBP, uint256 _harvestInterval, bool _withUpdate) public onlyOwner {
        require(_depositFeeBP <= 10000, "set: invalid deposit fee basis points");
        if (_withUpdate) {
            massUpdatePools();
        }
        totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(_allocPoint);
        poolInfo[_pid].allocPoint = _allocPoint;
        poolInfo[_pid].depositFeeBP = _depositFeeBP;
        poolInfo[_pid].harvestInterval = _harvestInterval;
    }

    // Return reward multiplier over the given _from to _to block.
    function getMultiplier(uint256 _from, uint256 _to) public pure returns (uint256) {
        return _to.sub(_from).mul(BONUS_MULTIPLIER);
    }

    // View function to see pending WUKONGs on frontend.
    function pendingWukong(uint256 _pid, address _user) external view returns (uint256) {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][_user];
        uint256 accWukongPerShare = pool.accWukongPerShare;
        uint256 lpSupply = pool.lpToken.balanceOf(address(this));
        if (_pid == 0){
            lpSupply = depositedWukong;
        }
        if (block.number > pool.lastRewardBlock && lpSupply != 0) {
            uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
            uint256 wukongReward = multiplier.mul(wukongPerBlock).mul(pool.allocPoint).div(totalAllocPoint);
            accWukongPerShare = accWukongPerShare.add(wukongReward.mul(1e12).div(lpSupply));
        }
        uint256 pending = user.amount.mul(accWukongPerShare).div(1e12).sub(user.rewardDebt);
        return pending.add(user.rewardLockedUp);
    }

    // View function to see if user can harvest WUKONGs.
    function canHarvest(uint256 _pid, address _user) public view returns (bool) {
        UserInfo storage user = userInfo[_pid][_user];
        return block.timestamp >= user.nextHarvestUntil;
    }

    // Update reward variables for all pools. Be careful of gas spending!
    function massUpdatePools() public {
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {
            updatePool(pid);
        }
    }

    // Update reward variables of the given pool to be up-to-date.
    function updatePool(uint256 _pid) public {
        PoolInfo storage pool = poolInfo[_pid];
        if (block.number <= pool.lastRewardBlock) {
            return;
        }
        uint256 lpSupply = pool.lpToken.balanceOf(address(this));        
        if (_pid == 0){
            lpSupply = depositedWukong;
        }
        if (lpSupply <= 0 || pool.allocPoint == 0) {
            pool.lastRewardBlock = block.number;
            return;
        }
        uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
        uint256 wukongReward = multiplier.mul(wukongPerBlock).mul(pool.allocPoint).div(totalAllocPoint);
        wukong.mint(teamAddr, wukongReward.div(teamReward));
        wukong.mint(address(this), wukongReward);
        pool.accWukongPerShare = pool.accWukongPerShare.add(wukongReward.mul(1e12).div(lpSupply));
        pool.lastRewardBlock = block.number;
    }

    // Deposit LP tokens to MasterChef for WUKONG allocation.
    function deposit(uint256 _pid, uint256 _amount, address _referrer) public nonReentrant {
        require (_pid != 0, 'deposit WUKONG by staking');

        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        updatePool(_pid);
        if (_amount > 0 && address(wukongReferral) != address(0) && _referrer != address(0) && _referrer != msg.sender) {
            wukongReferral.recordReferral(msg.sender, _referrer);
        }
        payOrLockupPendingWukong(_pid);
        if (_amount > 0) {
            pool.lpToken.safeTransferFrom(address(msg.sender), address(this), _amount);
            if (address(pool.lpToken) == address(wukong)) {
                uint256 transferTax = _amount.mul(wukong.transferTaxRate()).div(10000);
                _amount = _amount.sub(transferTax);
            }
            if (pool.depositFeeBP > 0) {
                uint256 depositFee = _amount.mul(pool.depositFeeBP).div(10000);
                pool.lpToken.safeTransfer(feeAddress, depositFee);
                user.amount = user.amount.add(_amount).sub(depositFee);
            }else{
                user.amount = user.amount.add(_amount);
            }
        }
        user.rewardDebt = user.amount.mul(pool.accWukongPerShare).div(1e12);
        emit Deposit(msg.sender, _pid, _amount);
    }

    // Withdraw LP tokens from MasterChef.
    function withdraw(uint256 _pid, uint256 _amount) public nonReentrant {
        require (_pid != 0, 'withdraw WUKONG by unstaking');

        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        require(user.amount >= _amount, "withdraw: not good");
        updatePool(_pid);
        payOrLockupPendingWukong(_pid);
        if (_amount > 0) {
            user.amount = user.amount.sub(_amount);
            pool.lpToken.safeTransfer(address(msg.sender), _amount);
        }
        user.rewardDebt = user.amount.mul(pool.accWukongPerShare).div(1e12);
        emit Withdraw(msg.sender, _pid, _amount);
    }

    // Deposit LP tokens to MasterChef for WUKONG allocation.
    function enterStaking(uint256 _amount, address _referrer) public nonReentrant {
        PoolInfo storage pool = poolInfo[0];
        UserInfo storage user = userInfo[0][msg.sender];
        updatePool(0);
        if (_amount > 0 && address(wukongReferral) != address(0) && _referrer != address(0) && _referrer != msg.sender) {
            wukongReferral.recordReferral(msg.sender, _referrer);
        }
        payOrLockupPendingWukong(0);
        if (_amount > 0) {
            pool.lpToken.safeTransferFrom(address(msg.sender), address(this), _amount);
            if (address(pool.lpToken) == address(wukong)) {
                uint256 transferTax = _amount.mul(wukong.transferTaxRate()).div(10000);
                _amount = _amount.sub(transferTax);
            }
            if (pool.depositFeeBP > 0) {
                uint256 depositFee = _amount.mul(pool.depositFeeBP).div(10000);
                pool.lpToken.safeTransfer(feeAddress, depositFee);
                user.amount = user.amount.add(_amount).sub(depositFee);
                depositedWukong = depositedWukong.add(_amount).sub(depositFee);
            }else{
                user.amount = user.amount.add(_amount);
                depositedWukong = depositedWukong.add(_amount);
            }
        }
        user.rewardDebt = user.amount.mul(pool.accWukongPerShare).div(1e12);
        emit Deposit(msg.sender, 0, _amount);
    }

    // Withdraw LP tokens from MasterChef.
    function leaveStaking(uint256 _amount) public nonReentrant {
        PoolInfo storage pool = poolInfo[0];
        UserInfo storage user = userInfo[0][msg.sender];
        require(user.amount >= _amount, "withdraw: not good");
        updatePool(0);
        payOrLockupPendingWukong(0);
        if (_amount > 0) {
            user.amount = user.amount.sub(_amount);
            pool.lpToken.safeTransfer(address(msg.sender), _amount);
            depositedWukong = depositedWukong.sub(_amount);
        }
        user.rewardDebt = user.amount.mul(pool.accWukongPerShare).div(1e12);
        emit Withdraw(msg.sender, 0, _amount);
    }

    // Withdraw without caring about rewards. EMERGENCY ONLY.
    function emergencyWithdraw(uint256 _pid) public nonReentrant {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        pool.lpToken.safeTransfer(address(msg.sender), user.amount);
        emit EmergencyWithdraw(msg.sender, _pid, user.amount);
        user.amount = 0;
        user.rewardDebt = 0;
        user.rewardLockedUp = 0;
        user.nextHarvestUntil = 0;
    }

    // Pay or lockup pending WUKONGs.
    function payOrLockupPendingWukong(uint256 _pid) internal {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];

        uint256 diffBlocks = 0;
        uint256 diffTime = 0;
        if( startBlock > block.number ){
            diffBlocks = startBlock-block.number;
            diffTime = diffBlocks.mul(3);
        } else {
            diffBlocks = block.number - startBlock;
            diffTime = diffBlocks.mul(3);
        }

        if (user.nextHarvestUntil == 0) {
            if (startBlock > block.number) {
                user.nextHarvestUntil = block.timestamp.add(diffTime).add(pool.harvestInterval);
            } else {
                user.nextHarvestUntil = block.timestamp.add(pool.harvestInterval);
            }
        }

        uint256 pending = user.amount.mul(pool.accWukongPerShare).div(1e12).sub(user.rewardDebt);
        if (canHarvest(_pid, msg.sender)) {
            if (pending > 0 || user.rewardLockedUp > 0) {
                uint256 totalRewards = pending.add(user.rewardLockedUp);

                // reset lockup
                totalLockedUpRewards = totalLockedUpRewards.sub(user.rewardLockedUp);
                user.rewardLockedUp = 0;
                if (startBlock > block.number) {
                    user.nextHarvestUntil = block.timestamp.add(diffTime).add(pool.harvestInterval);
                } else {
                    user.nextHarvestUntil = block.timestamp.add(pool.harvestInterval);
                }

                // send rewards
                safeWukongTransfer(msg.sender, totalRewards);
                payReferralCommission(msg.sender, totalRewards);
            }
        } else if (pending > 0) {
            user.rewardLockedUp = user.rewardLockedUp.add(pending);
            totalLockedUpRewards = totalLockedUpRewards.add(pending);
            emit RewardLockedUp(msg.sender, _pid, pending);
        }
    }
    // Safe wukong transfer function, just in case if rounding error causes pool to not have enough WUKONGs.
    function safeWukongTransfer(address _to, uint256 _amount) internal {
        uint256 wukongBal = wukong.balanceOf(address(this));
        if (_amount > wukongBal) {
            wukong.transfer(_to, wukongBal);
        } else {
            wukong.transfer(_to, _amount);
        }
    }

    // Update team address by the previous team address.
    function setTeamAddress(address _teamAddress) public onlyOwner{
        require(_teamAddress != address(0), "team: ZERO");
        teamAddr = _teamAddress;
    }

    function setTeamReward(uint256 _teamReward) public onlyOwner{
        teamReward = _teamReward;
    }

    function setFeeAddress(address _feeAddress) public onlyOwner{
        require(_feeAddress != address(0), "setFeeAddress: ZERO");
        feeAddress = _feeAddress;
    }

    //Pancake has to add hidden dummy pools inorder to alter the emission, here we make it simple and transparent to all.
    function updateEmissionRate(uint256 _wukongPerBlock) public onlyOwner {
        massUpdatePools();
        emit EmissionRateUpdated(msg.sender, wukongPerBlock, _wukongPerBlock);
        wukongPerBlock = _wukongPerBlock;
    }

    // Update the wukong referral contract address by the owner
    function setWukongReferral(IWukongReferral _wukongReferral) public onlyOwner {
        wukongReferral = _wukongReferral;
    }

    // Update referral commission rate by the owner
    function setReferralCommissionRate(uint16 _referralCommissionRate) public onlyOwner {
        require(_referralCommissionRate <= MAXIMUM_REFERRAL_COMMISSION_RATE, "setReferralCommissionRate: invalid referral commission rate basis points");
        referralCommissionRate = _referralCommissionRate;
    }

    function setStartBlock(uint256 _startBlock) public onlyOwner {
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {            
            PoolInfo storage pool = poolInfo[pid];
            if (pool.lastRewardBlock <= _startBlock) {
                pool.lastRewardBlock = _startBlock;
            }
        }

        startBlock = _startBlock;
    }

    // Pay referral commission to the referrer who referred this user.
    function payReferralCommission(address _user, uint256 _pending) internal {
        if (address(wukongReferral) != address(0) && referralCommissionRate > 0) {
            address referrer = wukongReferral.getReferrer(_user);
            uint256 commissionAmount = _pending.mul(referralCommissionRate).div(10000);

            if (referrer != address(0) && commissionAmount > 0) {
                wukong.mint(referrer, commissionAmount);
                wukongReferral.recordReferralCommission(referrer, commissionAmount);
                emit ReferralCommissionPaid(_user, referrer, commissionAmount);
            }
        }
    }
}

{
  "compilationTarget": {
    "MasterChefV2.sol": "MasterChefV2"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}