BlankFace

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './ERC721Enumerable.sol';
import './Ownable.sol';
import './Strings.sol';
import './Functions.sol';
import './Metadata.sol';

contract BlankFace is ERC721Enumerable, Ownable, Functions, Metadata {
  using Strings for uint256;

  uint256 public constant RESERVE = 100;
  uint256 public constant PUBLIC = 9900;
  uint256 public constant NFT_MAX = RESERVE + PUBLIC;
  uint256 public constant PURCHASE_LIMIT = 5;
  uint256 public constant PRICE = 0.0888 ether;

  bool public isTier1Active = false;
  bool public isTier2Active = false;
  bool public isTier3Active = false;
  bool public isTier4Active = false;
  bool public isTier5Active = false;
  bool public isTier6Active = false;

  bool public isMasterActive = false;
  bool public isPublicActive = false;
  
  string public message;

  uint256 public Tier1MaxMint = 1;
  uint256 public Tier2MaxMint = 2;
  uint256 public Tier3MaxMint = 3;
  uint256 public Tier4MaxMint = 4;
  uint256 public Tier5MaxMint = 5;
  uint256 public Tier6MaxMint = 6;

  /// @dev We will use these to be able to calculate remaining correctly.
  uint256 public totalReserveSupply;
  uint256 public totalPublicSupply;

  mapping(address => bool) private _Tier1;
  mapping(address => uint256) private _Tier1Claimed;
  mapping(address => bool) private _Tier2;
  mapping(address => uint256) private _Tier2Claimed;
  mapping(address => bool) private _Tier3;
  mapping(address => uint256) private _Tier3Claimed;
  mapping(address => bool) private _Tier4;
  mapping(address => uint256) private _Tier4Claimed;
  mapping(address => bool) private _Tier5;
  mapping(address => uint256) private _Tier5Claimed;
  mapping(address => bool) private _Tier6;
  mapping(address => uint256) private _Tier6Claimed;

  string private _contractURI = '';
  string private _tokenBaseURI = '';
  string private _tokenRevealedBaseURI = '';

  constructor(string memory name, string memory symbol) ERC721(name, symbol) {}


//tier1
  function addToTier1(address[] calldata addresses) external override onlyOwner {
    for (uint256 i = 0; i < addresses.length; i++) {
      require(addresses[i] != address(0), "Can't add the null address");
      _Tier1[addresses[i]] = true;
      _Tier1Claimed[addresses[i]] > 0 ? _Tier1Claimed[addresses[i]] : 0;
    }
  }
  
  function onTier1(address addr) external view override returns (bool) {
    return _Tier1[addr];
  }
  
  function removeFromTier1(address[] calldata addresses) external override onlyOwner {
    for (uint256 i = 0; i < addresses.length; i++) {
      require(addresses[i] != address(0), "Can't add the null address");
      _Tier1[addresses[i]] = false;
    }
  }
  
  function Tier1ClaimedBy(address owner) external view override returns (uint256){
    require(owner != address(0), 'Zero address');
    return _Tier1Claimed[owner];
  }


//tier2
  function addToTier2(address[] calldata addresses) external override onlyOwner {
    for (uint256 i = 0; i < addresses.length; i++) {
      require(addresses[i] != address(0), "Can't add the null address");
      _Tier2[addresses[i]] = true;
      _Tier2Claimed[addresses[i]] > 0 ? _Tier2Claimed[addresses[i]] : 0;
    }
  }
  
  function onTier2(address addr) external view override returns (bool) {
    return _Tier2[addr];
  }
  
  function removeFromTier2(address[] calldata addresses) external override onlyOwner {
    for (uint256 i = 0; i < addresses.length; i++) {
      require(addresses[i] != address(0), "Can't add the null address");
      _Tier2[addresses[i]] = false;
    }
  }

  function Tier2ClaimedBy(address owner) external view override returns (uint256){
    require(owner != address(0), 'Zero address');
    return _Tier2Claimed[owner];
  }


//tier3
  function addToTier3(address[] calldata addresses) external override onlyOwner {
    for (uint256 i = 0; i < addresses.length; i++) {
      require(addresses[i] != address(0), "Can't add the null address");
      _Tier3[addresses[i]] = true;
      _Tier3Claimed[addresses[i]] > 0 ? _Tier3Claimed[addresses[i]] : 0;
    }
  }
  
  function onTier3(address addr) external view override returns (bool) {
    return _Tier3[addr];
  }
  
  function removeFromTier3(address[] calldata addresses) external override onlyOwner {
    for (uint256 i = 0; i < addresses.length; i++) {
      require(addresses[i] != address(0), "Can't add the null address");
      _Tier3[addresses[i]] = false;
    }
  }
  
  function Tier3ClaimedBy(address owner) external view override returns (uint256){
    require(owner != address(0), 'Zero address');
    return _Tier3Claimed[owner];
  }


//tier4
  function addToTier4(address[] calldata addresses) external override onlyOwner {
    for (uint256 i = 0; i < addresses.length; i++) {
      require(addresses[i] != address(0), "Can't add the null address");
      _Tier4[addresses[i]] = true;
      _Tier4Claimed[addresses[i]] > 0 ? _Tier4Claimed[addresses[i]] : 0;
    }
  }
  
  function onTier4(address addr) external view override returns (bool) {
    return _Tier4[addr];
  }
  
  function removeFromTier4(address[] calldata addresses) external override onlyOwner {
    for (uint256 i = 0; i < addresses.length; i++) {
      require(addresses[i] != address(0), "Can't add the null address");
      _Tier4[addresses[i]] = false;
    }
  }
  
 function Tier4ClaimedBy(address owner) external view override returns (uint256){
    require(owner != address(0), 'Zero address');
    return _Tier4Claimed[owner];
  }


//tier5
 function addToTier5(address[] calldata addresses) external override onlyOwner {
    for (uint256 i = 0; i < addresses.length; i++) {
      require(addresses[i] != address(0), "Can't add the null address");
      _Tier5[addresses[i]] = true;
      _Tier5Claimed[addresses[i]] > 0 ? _Tier5Claimed[addresses[i]] : 0;
    }
  }
  
  function onTier5(address addr) external view override returns (bool) {
    return _Tier5[addr];
  }
  
  function removeFromTier5(address[] calldata addresses) external override onlyOwner {
    for (uint256 i = 0; i < addresses.length; i++) {
      require(addresses[i] != address(0), "Can't add the null address");
      _Tier5[addresses[i]] = false;
    }
  }
  
  
 function Tier5ClaimedBy(address owner) external view override returns (uint256){
    require(owner != address(0), 'Zero address');

    return _Tier5Claimed[owner];
  }
  
//Tier6
 function addToTier6(address[] calldata addresses) external override onlyOwner {
    for (uint256 i = 0; i < addresses.length; i++) {
      require(addresses[i] != address(0), "Can't add the null address");
      _Tier6[addresses[i]] = true;
      _Tier6Claimed[addresses[i]] > 0 ? _Tier4Claimed[addresses[i]] : 0;
    }
  }
  
  function onTier6(address addr) external view override returns (bool) {
    return _Tier6[addr];
  }
  
  function removeFromTier6(address[] calldata addresses) external override onlyOwner {
    for (uint256 i = 0; i < addresses.length; i++) {
      require(addresses[i] != address(0), "Can't add the null address");
      _Tier6[addresses[i]] = false;
    }
  }
  
 function Tier6ClaimedBy(address owner) external view override returns (uint256){
    require(owner != address(0), 'Zero address');

    return _Tier6Claimed[owner];
  }


  function mintTier1(uint256 numberOfTokens) external override payable {


    require(isMasterActive, 'Contract is not active');
    require(isTier1Active, 'Tier is not active');
    require(_Tier1[msg.sender]);
    require(totalSupply() < NFT_MAX, 'All tokens have been minted');
    require(numberOfTokens <= Tier1MaxMint, 'Cannot purchase this many tokens');
    require(totalPublicSupply + numberOfTokens <= PUBLIC, 'Purchase would exceed max supply');
    require(_Tier1Claimed[msg.sender] + numberOfTokens <= Tier1MaxMint, 'Purchase exceeds max allowed');
    require(PRICE * numberOfTokens <= msg.value, 'ETH amount is not sufficient');

    for (uint256 i = 0; i < numberOfTokens; i++) {

      uint256 tokenId = RESERVE + totalPublicSupply + 1;

      totalPublicSupply += 1;
      _Tier1Claimed[msg.sender] += 1;
      _safeMint(msg.sender, tokenId);
    }

  
  }
  
    function mintTier2(uint256 numberOfTokens) external override payable {


    require(isMasterActive, 'Contract is not active');
    require(isTier2Active, 'Tier is not active');
    require(_Tier2[msg.sender]);
    require(totalSupply() < NFT_MAX, 'All tokens have been minted');
    require(numberOfTokens <= Tier2MaxMint, 'Cannot purchase this many tokens');
    require(totalPublicSupply + numberOfTokens <= PUBLIC, 'Purchase would exceed max supply');
    require(_Tier2Claimed[msg.sender] + numberOfTokens <= Tier2MaxMint, 'Purchase exceeds max allowed');
    require(PRICE * numberOfTokens <= msg.value, 'ETH amount is not sufficient');

    for (uint256 i = 0; i < numberOfTokens; i++) {

      uint256 tokenId = RESERVE + totalPublicSupply + 1;

      totalPublicSupply += 1;
      _Tier2Claimed[msg.sender] += 1;
      _safeMint(msg.sender, tokenId);
    }

  
  }
  
function mintTier3(uint256 numberOfTokens) external override payable {


    require(isMasterActive, 'Contract is not active');
    require(isTier3Active, 'Tier is not active');
    require(_Tier3[msg.sender]);
    require(totalSupply() < NFT_MAX, 'All tokens have been minted');
    require(numberOfTokens <= Tier3MaxMint, 'Cannot purchase this many tokens');
    require(totalPublicSupply + numberOfTokens <= PUBLIC, 'Purchase would exceed max supply');
    require(_Tier3Claimed[msg.sender] + numberOfTokens <= Tier3MaxMint, 'Purchase exceeds max allowed');
    require(PRICE * numberOfTokens <= msg.value, 'ETH amount is not sufficient');

    for (uint256 i = 0; i < numberOfTokens; i++) {

      uint256 tokenId = RESERVE + totalPublicSupply + 1;

      totalPublicSupply += 1;
      _Tier3Claimed[msg.sender] += 1;
      _safeMint(msg.sender, tokenId);
    }

  
  }
  
function mintTier4(uint256 numberOfTokens) external override payable {


    require(isMasterActive, 'Contract is not active');
    require(isTier4Active, 'Tier is not active');
    require(_Tier4[msg.sender]);
    require(totalSupply() < NFT_MAX, 'All tokens have been minted');
    require(numberOfTokens <= Tier4MaxMint, 'Cannot purchase this many tokens');
    require(totalPublicSupply + numberOfTokens <= PUBLIC, 'Purchase would exceed max supply');
    require(_Tier4Claimed[msg.sender] + numberOfTokens <= Tier4MaxMint, 'Purchase exceeds max allowed');
    require(PRICE * numberOfTokens <= msg.value, 'ETH amount is not sufficient');

    for (uint256 i = 0; i < numberOfTokens; i++) {

      uint256 tokenId = RESERVE + totalPublicSupply + 1;

      totalPublicSupply += 1;
      _Tier4Claimed[msg.sender] += 1;
      _safeMint(msg.sender, tokenId);
    }

  
  }
  
  
function mintTier5(uint256 numberOfTokens) external override payable {


    require(isMasterActive, 'Contract is not active');
    require(isTier5Active, 'Tier is not active');
    require(_Tier5[msg.sender]);
    require(totalSupply() < NFT_MAX, 'All tokens have been minted');
    require(numberOfTokens <= Tier5MaxMint, 'Cannot purchase this many tokens');
    require(totalPublicSupply + numberOfTokens <= PUBLIC, 'Purchase would exceed max supply');
    require(_Tier5Claimed[msg.sender] + numberOfTokens <= Tier5MaxMint, 'Purchase exceeds max allowed');
    require(PRICE * numberOfTokens <= msg.value, 'ETH amount is not sufficient');

    for (uint256 i = 0; i < numberOfTokens; i++) {

      uint256 tokenId = RESERVE + totalPublicSupply + 1;

      totalPublicSupply += 1;
      _Tier5Claimed[msg.sender] += 1;
      _safeMint(msg.sender, tokenId);
    }

  }
  
function mintTier6(uint256 numberOfTokens) external override payable {


    require(isMasterActive, 'Contract is not active');
    require(isTier6Active, 'Tier is not active');
    require(_Tier6[msg.sender]);
    require(totalSupply() < NFT_MAX, 'All tokens have been minted');
    require(numberOfTokens <= Tier6MaxMint, 'Cannot purchase this many tokens');
    require(totalPublicSupply + numberOfTokens <= PUBLIC, 'Purchase would exceed max supply');
    require(_Tier6Claimed[msg.sender] + numberOfTokens <= Tier6MaxMint, 'Purchase exceeds max allowed');
    require(PRICE * numberOfTokens <= msg.value, 'ETH amount is not sufficient');

    for (uint256 i = 0; i < numberOfTokens; i++) {

      uint256 tokenId = RESERVE + totalPublicSupply + 1;

      totalPublicSupply += 1;
      _Tier6Claimed[msg.sender] += 1;
      _safeMint(msg.sender, tokenId);
    }

  
  }
  
function mintPublic(uint256 numberOfTokens) external override payable {

    require(isMasterActive, 'Contract is not active');
    require(isPublicActive, 'Public is not active');
    
    require(totalSupply() < NFT_MAX, 'All tokens have been minted');
    require(numberOfTokens <= PURCHASE_LIMIT, 'Cannot purchase this many tokens');
    require(totalPublicSupply + numberOfTokens <= PUBLIC, 'Purchase would exceed max supply');
    require(PRICE * numberOfTokens <= msg.value, 'ETH amount is not sufficient');

    for (uint256 i = 0; i < numberOfTokens; i++) {

      uint256 tokenId = RESERVE + totalPublicSupply + 1;

      totalPublicSupply += 1;
      _safeMint(msg.sender, tokenId);
    }

  }

  function reserve(address[] calldata to) external override onlyOwner {
    require(totalSupply() < NFT_MAX, 'All tokens have been minted');
    require(totalReserveSupply + to.length <= RESERVE, 'Not enough tokens left to reserve');

    for(uint256 i = 0; i < to.length; i++) {
      uint256 tokenId = totalReserveSupply + 1;

      totalReserveSupply += 1;
      _safeMint(to[i], tokenId);
    }
  }

  function MasterActive(bool _isMasterActive) external override onlyOwner {
    isMasterActive = _isMasterActive;
  }
  
  function PublicActive(bool _isPublicActive) external override onlyOwner {
    isPublicActive = _isPublicActive;
  }

  function Tier1Active(bool _isTier1Active) external override onlyOwner {
    isTier1Active = _isTier1Active;
  }
  
  function Tier2Active(bool _isTier2Active) external override onlyOwner {
    isTier2Active = _isTier2Active;
  }
  
  function Tier3Active(bool _isTier3Active) external override onlyOwner {
    isTier3Active = _isTier3Active;
  }

  function Tier4Active(bool _isTier4Active) external override onlyOwner {
    isTier4Active = _isTier4Active;
  }

  function Tier5Active(bool _isTier5Active) external override onlyOwner {
    isTier5Active = _isTier5Active;
  }

  function Tier6Active(bool _isTier6Active) external override onlyOwner {
    isTier6Active = _isTier6Active;
  }

  function setMessage(string calldata messageString) external override onlyOwner {
    message = messageString;
  }

  function withdraw() external override onlyOwner {
    uint256 balance = address(this).balance;
    payable(msg.sender).transfer(balance);
  }

  function setContractURI(string calldata URI) external override onlyOwner {
    _contractURI = URI;
  }

  function setBaseURI(string calldata URI) external override onlyOwner {
    _tokenBaseURI = URI;
  }

  function setRevealedBaseURI(string calldata revealedBaseURI) external override onlyOwner {
    _tokenRevealedBaseURI = revealedBaseURI;
  }

  function contractURI() public view override returns (string memory) {
    return _contractURI;
  }

  function tokenURI(uint256 tokenId) public view override(ERC721) returns (string memory) {
    require(_exists(tokenId), 'Token does not exist');

    /// @dev Convert string to bytes so we can check if it's empty or not.
    string memory revealedBaseURI = _tokenRevealedBaseURI;
    return bytes(revealedBaseURI).length > 0 ?
      string(abi.encodePacked(revealedBaseURI, tokenId.toString())) :
      _tokenBaseURI;
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./IERC721Metadata.sol";
import "./Address.sol";
import "./Context.sol";
import "./Strings.sol";
import "./ERC165.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _owners[tokenId];
        require(owner != address(0), "ERC721: owner query for nonexistent token");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overriden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not owner nor approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        require(operator != _msgSender(), "ERC721: approve to caller");

        _operatorApprovals[_msgSender()][operator] = approved;
        emit ApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _safeTransfer(from, to, tokenId, _data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `_data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _owners[tokenId] != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, _data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId);

        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(address(0), to, tokenId);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId);

        // Clear approvals
        _approve(address(0), tokenId);

        _balances[owner] -= 1;
        delete _owners[tokenId];

        emit Transfer(owner, address(0), tokenId);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId);

        _balances[from] -= 1;
        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits a {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
                return retval == IERC721Receiver(to).onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./ERC721.sol";
import "./IERC721Enumerable.sol";

/**
 * @dev This implements an optional extension of {ERC721} defined in the EIP that adds
 * enumerability of all the token ids in the contract as well as all token ids owned by each
 * account.
 */
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
    // Mapping from owner to list of owned token IDs
    mapping(address => mapping(uint256 => uint256)) private _ownedTokens;

    // Mapping from token ID to index of the owner tokens list
    mapping(uint256 => uint256) private _ownedTokensIndex;

    // Array with all token ids, used for enumeration
    uint256[] private _allTokens;

    // Mapping from token id to position in the allTokens array
    mapping(uint256 => uint256) private _allTokensIndex;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
        return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
        require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
        return _ownedTokens[owner][index];
    }

    /**
     * @dev See {IERC721Enumerable-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _allTokens.length;
    }

    /**
     * @dev See {IERC721Enumerable-tokenByIndex}.
     */
    function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
        require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
        return _allTokens[index];
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual override {
        super._beforeTokenTransfer(from, to, tokenId);

        if (from == address(0)) {
            _addTokenToAllTokensEnumeration(tokenId);
        } else if (from != to) {
            _removeTokenFromOwnerEnumeration(from, tokenId);
        }
        if (to == address(0)) {
            _removeTokenFromAllTokensEnumeration(tokenId);
        } else if (to != from) {
            _addTokenToOwnerEnumeration(to, tokenId);
        }
    }

    /**
     * @dev Private function to add a token to this extension's ownership-tracking data structures.
     * @param to address representing the new owner of the given token ID
     * @param tokenId uint256 ID of the token to be added to the tokens list of the given address
     */
    function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
        uint256 length = ERC721.balanceOf(to);
        _ownedTokens[to][length] = tokenId;
        _ownedTokensIndex[tokenId] = length;
    }

    /**
     * @dev Private function to add a token to this extension's token tracking data structures.
     * @param tokenId uint256 ID of the token to be added to the tokens list
     */
    function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
        _allTokensIndex[tokenId] = _allTokens.length;
        _allTokens.push(tokenId);
    }

    /**
     * @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
     * while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
     * gas optimizations e.g. when performing a transfer operation (avoiding double writes).
     * This has O(1) time complexity, but alters the order of the _ownedTokens array.
     * @param from address representing the previous owner of the given token ID
     * @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
     */
    function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
        // To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).

        uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
        uint256 tokenIndex = _ownedTokensIndex[tokenId];

        // When the token to delete is the last token, the swap operation is unnecessary
        if (tokenIndex != lastTokenIndex) {
            uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];

            _ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
            _ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
        }

        // This also deletes the contents at the last position of the array
        delete _ownedTokensIndex[tokenId];
        delete _ownedTokens[from][lastTokenIndex];
    }

    /**
     * @dev Private function to remove a token from this extension's token tracking data structures.
     * This has O(1) time complexity, but alters the order of the _allTokens array.
     * @param tokenId uint256 ID of the token to be removed from the tokens list
     */
    function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
        // To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).

        uint256 lastTokenIndex = _allTokens.length - 1;
        uint256 tokenIndex = _allTokensIndex[tokenId];

        // When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
        // rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
        // an 'if' statement (like in _removeTokenFromOwnerEnumeration)
        uint256 lastTokenId = _allTokens[lastTokenIndex];

        _allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
        _allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index

        // This also deletes the contents at the last position of the array
        delete _allTokensIndex[tokenId];
        _allTokens.pop();
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface Functions {
  function addToTier1(address[] calldata addresses) external;

  function onTier1(address addr) external returns (bool);

  function removeFromTier1(address[] calldata addresses) external;
  
  function addToTier2(address[] calldata addresses) external;

  function onTier2(address addr) external returns (bool);

  function removeFromTier2(address[] calldata addresses) external;

  function addToTier3(address[] calldata addresses) external;

  function onTier3(address addr) external returns (bool);

  function removeFromTier3(address[] calldata addresses) external;

  function addToTier4(address[] calldata addresses) external;

  function onTier4(address addr) external returns (bool);

  function removeFromTier4(address[] calldata addresses) external;
  
  function addToTier5(address[] calldata addresses) external;

  function onTier5(address addr) external returns (bool);

  function removeFromTier5(address[] calldata addresses) external;
  
  function addToTier6(address[] calldata addresses) external;

  function onTier6(address addr) external returns (bool);

  function removeFromTier6(address[] calldata addresses) external;
  
  function Tier1ClaimedBy(address owner) external returns (uint256);
  
  function Tier2ClaimedBy(address owner) external returns (uint256);

  function Tier3ClaimedBy(address owner) external returns (uint256);

  function Tier4ClaimedBy(address owner) external returns (uint256);

  function Tier5ClaimedBy(address owner) external returns (uint256);

  function Tier6ClaimedBy(address owner) external returns (uint256);

  function mintTier1(uint256 numberOfTokens) external payable;

  function mintTier2(uint256 numberOfTokens) external payable;

  function mintTier3(uint256 numberOfTokens) external payable;

  function mintTier4(uint256 numberOfTokens) external payable;

  function mintTier5(uint256 numberOfTokens) external payable;

  function mintTier6(uint256 numberOfTokens) external payable;

  function mintPublic(uint256 numberOfTokens) external payable;

  function reserve(address[] calldata to) external;

  function MasterActive(bool isMasterActive) external;
  
  function PublicActive(bool isPublicActive) external;

  function Tier1Active(bool isTier1Active) external;

  function Tier2Active(bool isTier2Active) external;

  function Tier3Active(bool isTier3Active) external;

  function Tier4Active(bool isTier4Active) external;

  function Tier5Active(bool isTier5Active) external;

  function Tier6Active(bool isTier6Active) external;

  function setMessage(string memory messageString) external;

  function withdraw() external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Enumerable is IERC721 {
    /**
     * @dev Returns the total amount of tokens stored by the contract.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
     * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);

    /**
     * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
     * Use along with {totalSupply} to enumerate all tokens.
     */
    function tokenByIndex(uint256 index) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface Metadata {
  function setContractURI(string calldata URI) external;

  function setBaseURI(string calldata URI) external;

  function setRevealedBaseURI(string calldata revealedBaseURI) external;

  function contractURI() external view returns(string memory);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

{
  "compilationTarget": {
    "BlankFace.sol": "BlankFace"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}