// SPDX-License-Identifier: MIT
// Thanks to ultrasecr.eth
pragma solidity ^0.8.19;

import { Registry } from "src/Registry.sol";

import { IPool } from "./interfaces/IPool.sol";
import { IPoolDataProvider } from "./interfaces/IPoolDataProvider.sol";
import { IFlashLoanReceiverV2V3 } from "./interfaces/IFlashLoanReceiverV2V3.sol";

import { Math } from "@openzeppelin/contracts/utils/math/Math.sol";

import { BaseWrapper, IERC7399, IERC20 } from "../BaseWrapper.sol";
import { Arrays } from "../utils/Arrays.sol";
import { WAD } from "../utils/constants.sol";

/// @dev Aave Flash Lender that uses the Aave Pool as source of liquidity.
/// Aave doesn't allow flow splitting or pushing repayments, so this wrapper is completely vanilla.
contract AaveWrapper is BaseWrapper, IFlashLoanReceiverV2V3 {
    using Arrays for *;

    error NotPool();
    error NotInitiator();

    // solhint-disable-next-line var-name-mixedcase
    address public immutable ADDRESSES_PROVIDER;
    // solhint-disable-next-line var-name-mixedcase
    address public immutable POOL;
    // solhint-disable-next-line var-name-mixedcase
    address public immutable LENDING_POOL;

    IPoolDataProvider public immutable dataProvider;
    bool public immutable isV2;

    constructor(Registry reg, string memory name) {
        address pool;
        (pool, ADDRESSES_PROVIDER, dataProvider, isV2) =
            abi.decode(reg.getSafe(string.concat(name, "Wrapper")), (address, address, IPoolDataProvider, bool));
        POOL = pool;
        LENDING_POOL = pool;
    }

    /// @inheritdoc IERC7399
    function maxFlashLoan(address asset) external view returns (uint256) {
        return _maxFlashLoan(asset);
    }

    /// @inheritdoc IERC7399
    function flashFee(address asset, uint256 amount) external view returns (uint256) {
        uint256 max = _maxFlashLoan(asset);
        require(max > 0, "Unsupported currency");
        return amount >= max ? type(uint256).max : _flashFee(amount);
    }

    /// @inheritdoc IFlashLoanReceiverV2V3
    function executeOperation(
        address[] calldata assets,
        uint256[] calldata amounts,
        uint256[] calldata fees,
        address initiator,
        bytes calldata params
    )
        external
        override
        returns (bool)
    {
        if (msg.sender != address(POOL)) revert NotPool();
        if (initiator != address(this)) revert NotInitiator();

        _bridgeToCallback(assets[0], amounts[0], fees[0], params);

        return true;
    }

    function _flashLoan(address asset, uint256 amount, bytes memory data) internal virtual override {
        IPool(POOL).flashLoan({
            receiverAddress: address(this),
            assets: asset.toArray(),
            amounts: amount.toArray(),
            interestRateModes: 0.toArray(), // NONE
            onBehalfOf: address(this),
            params: data,
            referralCode: 0
        });
    }

    function _maxFlashLoan(address asset) internal view returns (uint256 max) {
        (,,,,,,,, bool isActive, bool isFrozen) = dataProvider.getReserveConfigurationData(asset);
        (address aTokenAddress,,) = dataProvider.getReserveTokensAddresses(asset);
        bool isFlashLoanEnabled = isV2 ? true : dataProvider.getFlashLoanEnabled(asset);

        max = !isFrozen && isActive && isFlashLoanEnabled ? IERC20(asset).balanceOf(aTokenAddress) : 0;
    }

    function _flashFee(uint256 amount) internal view virtual returns (uint256) {
        return Math.mulDiv(amount, IPool(POOL).FLASHLOAN_PREMIUM_TOTAL() * 0.0001e18, WAD, Math.Rounding.Ceil);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/AccessControl.sol)

pragma solidity ^0.8.20;

import {IAccessControl} from "./IAccessControl.sol";
import {Context} from "../utils/Context.sol";
import {ERC165} from "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```solidity
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```solidity
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
 * to enforce additional security measures for this role.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address account => bool) hasRole;
        bytes32 adminRole;
    }

    mapping(bytes32 role => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with an {AccessControlUnauthorizedAccount} error including the required role.
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual returns (bool) {
        return _roles[role].hasRole[account];
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`
     * is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`
     * is missing `role`.
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert AccessControlUnauthorizedAccount(account, role);
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address callerConfirmation) public virtual {
        if (callerConfirmation != _msgSender()) {
            revert AccessControlBadConfirmation();
        }

        _revokeRole(role, callerConfirmation);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual returns (bool) {
        if (!hasRole(role, account)) {
            _roles[role].hasRole[account] = true;
            emit RoleGranted(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Attempts to revoke `role` to `account` and returns a boolean indicating if `role` was revoked.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {
        if (hasRole(role, account)) {
            _roles[role].hasRole[account] = false;
            emit RoleRevoked(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// Thanks to ultrasecr.eth
pragma solidity ^0.8.19;

library Arrays {
    function toArray(uint256 n) internal pure returns (uint256[] memory arr) {
        arr = new uint256[](1);
        arr[0] = n;
    }

    function toArray(address a) internal pure returns (address[] memory arr) {
        arr = new address[](1);
        arr[0] = a;
    }

    function toArray(address a, address b) internal pure returns (address[] memory arr) {
        arr = new address[](2);
        arr[0] = a;
        arr[1] = b;
    }
}

// SPDX-License-Identifier: MIT
// Thanks to ultrasecr.eth
pragma solidity ^0.8.19;

import "erc7399/IERC7399.sol";

import { IERC20Metadata as IERC20 } from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { FunctionCodec } from "./utils/FunctionCodec.sol";

/// @dev All ERC7399 flash loan wrappers have the same general structure.
/// - The ERC7399 `flash` function is the entry point for the flash loan.
/// - The wrapper calls the underlying lender flash lender on their non-ERC7399 flash lending call to borrow the funds.
/// -     The lender sends the funds to the wrapper.
/// -         The wrapper receives the callback from the lender.
/// -         The wrapper sends the funds to the loan receiver.
/// -         The wrapper calls the callback supplied by the original borrower.
/// -             The callback from the original borrower executes.
/// -         Depending on the lender, the wrapper may have to approve it to pull the repayment.
/// -         If there is any data to return, it is kept in a storage variable.
/// -         The wrapper exits the callback.
/// -     The lender verifies or pulls the repayment.
/// - The wrapper returns to the original borrower the stored result of its callback.
abstract contract BaseWrapper is IERC7399 {
    using SafeERC20 for IERC20;

    struct Data {
        address loanReceiver;
        address initiator;
        function(address, address, address, uint256, uint256, bytes memory) external returns (bytes memory) callback;
        bytes initiatorData;
    }

    bytes internal _callbackResult;

    /// @inheritdoc IERC7399
    /// @dev The entry point for the ERC7399 flash loan. Packs data to convert the legacy flash loan into an ERC7399
    /// flash loan. Then it calls the legacy flash loan. Once the flash loan is done, checks if there is any return
    /// data and returns it.
    function flash(
        address loanReceiver,
        address asset,
        uint256 amount,
        bytes calldata initiatorData,
        function(address, address, address, uint256, uint256, bytes memory) external returns (bytes memory) callback
    )
        external
        returns (bytes memory result)
    {
        Data memory data = Data({
            loanReceiver: loanReceiver,
            initiator: msg.sender,
            callback: callback,
            initiatorData: initiatorData
        });

        return _flash(asset, amount, data);
    }

    /// @dev Alternative entry point for the ERC7399 flash loan, without function pointers. Packs data to convert the
    /// legacy flash loan into an ERC7399 flash loan. Then it calls the legacy flash loan. Once the flash loan is done,
    /// checks if there is any return data and returns it.
    function flash(
        address loanReceiver,
        address asset,
        uint256 amount,
        bytes calldata initiatorData,
        address callbackTarget,
        bytes4 callbackSelector
    )
        external
        returns (bytes memory result)
    {
        Data memory data = Data({
            loanReceiver: loanReceiver,
            initiator: msg.sender,
            callback: FunctionCodec.decodeFunction(callbackTarget, callbackSelector),
            initiatorData: initiatorData
        });

        return _flash(asset, amount, data);
    }

    function _flash(address asset, uint256 amount, Data memory data) internal virtual returns (bytes memory result) {
        _flashLoan(asset, amount, abi.encode(data));

        result = _callbackResult;
        // Avoid storage write if not needed
        if (result.length > 0) {
            delete _callbackResult;
        }
        return result;
    }

    /// @dev Call the legacy flashloan function in the child contract. This is where we borrow from Aave, Uniswap, etc.
    function _flashLoan(address asset, uint256 amount, bytes memory data) internal virtual;

    /// @dev Handle the common parts of bridging the callback from legacy to ERC7399. Transfer the funds to the loan
    /// receiver. Call the callback supplied by the original borrower. Approve the repayment if necessary. If there is
    /// any result, it is kept in a storage variable to be retrieved on `flash` after the legacy flash loan is finished.
    function _bridgeToCallback(address asset, uint256 amount, uint256 fee, bytes memory params) internal {
        Data memory data = abi.decode(params, (Data));
        _transferAssets(asset, amount, data.loanReceiver);

        // call the callback and tell the callback receiver to repay the loan to this contract
        bytes memory result = data.callback(data.initiator, _repayTo(), address(asset), amount, fee, data.initiatorData);

        _approveRepayment(asset, amount, fee);

        if (result.length > 0) {
            // if there's any result, it is kept in a storage variable to be retrieved later in this tx
            _callbackResult = result;
        }
    }

    /// @dev Transfer the assets to the loan receiver.
    /// Override it if the provider can send the funds directly
    function _transferAssets(address asset, uint256 amount, address loanReceiver) internal virtual {
        IERC20(asset).safeTransfer(loanReceiver, amount);
    }

    /// @dev Approve the repayment of the loan to the provider if needed.
    /// Override it if the provider can receive the funds directly and you want to avoid the if condition
    function _approveRepayment(address asset, uint256 amount, uint256 fee) internal virtual {
        if (_repayTo() == address(this)) {
            IERC20(asset).forceApprove(msg.sender, amount + fee);
        }
    }

    /// @dev Where should the end client send the funds to repay the loan
    /// Override it if the provider can receive the funds directly
    function _repayTo() internal view virtual returns (address) {
        return address(this);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// Thanks to ultrasecr.eth
pragma solidity ^0.8.19;

library FunctionCodec {
    function encodeParams(address contractAddr, bytes4 selector) internal pure returns (bytes24) {
        return bytes24(bytes20(contractAddr)) | bytes24(selector) >> 160;
    }

    function decodeParams(bytes24 encoded) internal pure returns (address contractAddr, bytes4 selector) {
        contractAddr = address(bytes20(encoded));
        selector = bytes4(encoded << 160);
    }

    function encodeFunction(
        function(address, address, address, uint256, uint256, bytes memory) external returns (bytes memory) f
    )
        internal
        pure
        returns (bytes24)
    {
        return encodeParams(f.address, f.selector);
    }

    function decodeFunction(
        address contractAddr,
        bytes4 selector
    )
        internal
        pure
        returns (function(address, address, address, uint256, uint256, bytes memory) external returns (bytes memory) f)
    {
        uint32 s = uint32(selector);
        // solhint-disable-next-line no-inline-assembly
        assembly {
            f.address := contractAddr
            f.selector := s
        }
    }

    function decodeFunction(bytes24 encoded)
        internal
        pure
        returns (function(address, address, address, uint256, uint256, bytes memory) external returns (bytes memory) f)
    {
        (address contractAddr, bytes4 selector) = decodeParams(encoded);
        return decodeFunction(contractAddr, selector);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/IAccessControl.sol)

pragma solidity ^0.8.20;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev The `account` is missing a role.
     */
    error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);

    /**
     * @dev The caller of a function is not the expected one.
     *
     * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.
     */
    error AccessControlBadConfirmation();

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     */
    function renounceRole(bytes32 role, address callerConfirmation) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: CC0
pragma solidity >=0.6.4;

/// @dev Specification for flash lenders compatible with ERC-7399
interface IERC7399 {
    /// @dev The amount of currency available to be lent.
    /// @param asset The loan currency.
    /// @return The amount of `asset` that can be borrowed.
    function maxFlashLoan(address asset) external view returns (uint256);

    /// @dev The fee to be charged for a given loan.
    /// @param asset The loan currency.
    /// @param amount The amount of assets lent.
    /// @return The amount of `asset` to be charged for the loan, on top of the returned principal.
    function flashFee(address asset, uint256 amount) external view returns (uint256);

    /// @dev Initiate a flash loan.
    /// @param loanReceiver The address receiving the flash loan
    /// @param asset The asset to be loaned
    /// @param amount The amount to loaned
    /// @param data The ABI encoded user data
    /// @param callback The address and signature of the callback function
    /// @return result ABI encoded result of the callback
    function flash(
        address loanReceiver,
        address asset,
        uint256 amount,
        bytes calldata data,
        /// @dev callback. This is a combination of the callback receiver address, and the signature of callback
        /// function. It is encoded packed as 20 bytes + 4 bytes.
        /// @dev the return of the callback function is not encoded in the parameter, but must be `returns (bytes
        /// memory)` for compliance with the standard.
        /// @param initiator The address that called this function
        /// @param paymentReceiver The address that needs to receive the amount plus fee at the end of the callback
        /// @param asset The asset to be loaned
        /// @param amount The amount to loaned
        /// @param fee The fee to be paid
        /// @param data The ABI encoded data to be passed to the callback
        /// @return result ABI encoded result of the callback
        function(address, address, address, uint256, uint256, bytes memory) external returns (bytes memory) callback
    ) external returns (bytes memory);
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.19;

/**
 * @title IFlashLoanReceiver interface
 * @notice Interface for the Aave fee IFlashLoanReceiver (V2/V3 compatible).
 * @author Aave
 * @dev implement this interface to develop a flashloan-compatible flashLoanReceiver contract
 *
 */
interface IFlashLoanReceiverV2V3 {
    function executeOperation(
        address[] calldata assets,
        uint256[] calldata amounts,
        uint256[] calldata premiums,
        address initiator,
        bytes calldata params
    )
        external
        returns (bool);

    function ADDRESSES_PROVIDER() external view returns (address);

    function LENDING_POOL() external view returns (address);

    function POOL() external view returns (address);
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.19;

/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
    /**
     * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
     * as long as the amount taken plus a fee is returned.
     * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
     * into consideration. For further details please visit https://docs.aave.com/developers/
     * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
     * @param assets The addresses of the assets being flash-borrowed
     * @param amounts The amounts of the assets being flash-borrowed
     * @param interestRateModes Types of the debt to open if the flash loan is not returned:
     *   0 -> Don"t open any debt, just revert if funds can"t be transferred from the receiver
     *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
     *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
     * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
     * @param params Variadic packed params to pass to the receiver as extra information
     * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
     *   0 if the action is executed directly by the user, without any middle-man
     */
    function flashLoan(
        address receiverAddress,
        address[] calldata assets,
        uint256[] calldata amounts,
        uint256[] calldata interestRateModes,
        address onBehalfOf,
        bytes calldata params,
        uint16 referralCode
    )
        external;

    /**
     * @notice Returns the total fee on flash loans
     * @return The total fee on flashloans
     */
    function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.19;

/**
 * @title IPoolDataProvider
 * @author Aave
 * @notice Defines the basic interface of a PoolDataProvider
 */
interface IPoolDataProvider {
    /**
     * @notice Returns the configuration data of the reserve
     * @dev Not returning borrow and supply caps for compatibility, nor pause flag
     * @param asset The address of the underlying asset of the reserve
     * @return decimals The number of decimals of the reserve
     * @return ltv The ltv of the reserve
     * @return liquidationThreshold The liquidationThreshold of the reserve
     * @return liquidationBonus The liquidationBonus of the reserve
     * @return reserveFactor The reserveFactor of the reserve
     * @return usageAsCollateralEnabled True if the usage as collateral is enabled, false otherwise
     * @return borrowingEnabled True if borrowing is enabled, false otherwise
     * @return stableBorrowRateEnabled True if stable rate borrowing is enabled, false otherwise
     * @return isActive True if it is active, false otherwise
     * @return isFrozen True if it is frozen, false otherwise
     */
    function getReserveConfigurationData(address asset)
        external
        view
        returns (
            uint256 decimals,
            uint256 ltv,
            uint256 liquidationThreshold,
            uint256 liquidationBonus,
            uint256 reserveFactor,
            bool usageAsCollateralEnabled,
            bool borrowingEnabled,
            bool stableBorrowRateEnabled,
            bool isActive,
            bool isFrozen
        );

    /**
     * @notice Returns the token addresses of the reserve
     * @param asset The address of the underlying asset of the reserve
     * @return aTokenAddress The AToken address of the reserve
     * @return stableDebtTokenAddress The StableDebtToken address of the reserve
     * @return variableDebtTokenAddress The VariableDebtToken address of the reserve
     */
    function getReserveTokensAddresses(address asset)
        external
        view
        returns (address aTokenAddress, address stableDebtTokenAddress, address variableDebtTokenAddress);

    /**
     * @notice Returns whether the reserve has FlashLoans enabled or disabled
     * @param asset The address of the underlying asset of the reserve
     * @return True if FlashLoans are enabled, false otherwise
     */
    function getFlashLoanEnabled(address asset) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// Thanks to ultrasecr.eth
pragma solidity ^0.8.19;

import { Registry } from "../Registry.sol";
import { AccessControl } from "@openzeppelin/contracts/access/AccessControl.sol";
import { AaveWrapper } from "./AaveWrapper.sol";

contract PermissionedAaveWrapper is AaveWrapper, AccessControl {
    bytes32 public constant BORROWER = keccak256("BORROWER");

    constructor(address owner, address borrower, Registry reg, string memory name) AaveWrapper(reg, name) {
        _grantRole(DEFAULT_ADMIN_ROLE, owner);
        _grantRole(BORROWER, borrower);
    }

    function _flashLoan(address asset, uint256 amount, bytes memory data) internal override onlyRole(BORROWER) {
        super._flashLoan(asset, amount, data);
    }

    // This contract will be whitelisted in Aave so it pays 0 fees
    function _flashFee(uint256) internal pure override returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { AccessControl } from "@openzeppelin/contracts/access/AccessControl.sol";

contract Registry is AccessControl {
    bytes32 public constant USER = keccak256("USER");

    event Registered(string key, bytes value);

    error NotFound();

    mapping(string key => bytes value) public get;

    constructor(address[] memory owners, address[] memory users) {
        for (uint256 i = 0; i < owners.length; i++) {
            _grantRole(DEFAULT_ADMIN_ROLE, owners[i]);
        }
        for (uint256 i = 0; i < users.length; i++) {
            _grantRole(USER, users[i]);
        }
    }

    function set(string memory key, bytes memory value) external onlyRole(USER) {
        get[key] = value;
        emit Registered(key, value);
    }

    function getSafe(string calldata key) external view returns (bytes memory result) {
        result = get[key];
        if (result.length == 0) {
            revert NotFound();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

uint256 constant WAD = 1e18;

{
  "compilationTarget": {
    "src/aave/PermissionedAaveWrapper.sol": "PermissionedAaveWrapper"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "appendCBOR": false,
    "bytecodeHash": "none"
  },
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "remappings": [
    ":@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    ":@prb/test/=lib/prb-test/src/",
    ":ds-test/=lib/forge-std/lib/ds-test/src/",
    ":erc3156/=lib/erc3156/contracts/",
    ":erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    ":erc7399/=lib/erc7399/src/",
    ":forge-std/=lib/forge-std/src/",
    ":openzeppelin-contracts/=lib/openzeppelin-contracts/",
    ":prb-test/=lib/prb-test/src/"
  ]
}