MIMO Parallel Governance Token

// SPDX-License-Identifier: MIT

pragma experimental ABIEncoderV2;
pragma solidity 0.6.12;


// 
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// 
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// 
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// 
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// 
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// 
interface IGovernorAlpha {
    /// @notice Possible states that a proposal may be in
    enum ProposalState {
        Active,
        Canceled,
        Defeated,
        Succeeded,
        Queued,
        Expired,
        Executed
    }

    struct Proposal {
        // Unique id for looking up a proposal
        uint256 id;

        // Creator of the proposal
        address proposer;

        // The timestamp that the proposal will be available for execution, set once the vote succeeds
        uint256 eta;

        // the ordered list of target addresses for calls to be made
        address[] targets;

        // The ordered list of values (i.e. msg.value) to be passed to the calls to be made
        uint256[] values;

        // The ordered list of function signatures to be called
        string[] signatures;

        // The ordered list of calldata to be passed to each call
        bytes[] calldatas;

        // The timestamp at which voting begins: holders must delegate their votes prior to this timestamp
        uint256 startTime;

        // The timestamp at which voting ends: votes must be cast prior to this timestamp
        uint endTime;

        // Current number of votes in favor of this proposal
        uint256 forVotes;

        // Current number of votes in opposition to this proposal
        uint256 againstVotes;

        // Flag marking whether the proposal has been canceled
        bool canceled;

        // Flag marking whether the proposal has been executed
        bool executed;

        // Receipts of ballots for the entire set of voters
        mapping (address => Receipt) receipts;
    }

    /// @notice Ballot receipt record for a voter
    struct Receipt {
        // Whether or not a vote has been cast
        bool hasVoted;

        // Whether or not the voter supports the proposal
        bool support;

        // The number of votes the voter had, which were cast
        uint votes;
    }

    /// @notice An event emitted when a new proposal is created
    event ProposalCreated(uint256 id, address proposer, address[] targets, uint256[] values, string[] signatures, bytes[] calldatas, uint startTime, uint endTime, string description);

    /// @notice An event emitted when a vote has been cast on a proposal
    event VoteCast(address voter, uint256 proposalId, bool support, uint256 votes);

    /// @notice An event emitted when a proposal has been canceled
    event ProposalCanceled(uint256 id);

    /// @notice An event emitted when a proposal has been queued in the Timelock
    event ProposalQueued(uint256 id, uint256 eta);

    /// @notice An event emitted when a proposal has been executed in the Timelock
    event ProposalExecuted(uint256 id);

    function propose(address[] memory targets, uint256[] memory values, string[] memory signatures, bytes[] memory calldatas, string memory description, uint256 endTime) external returns (uint);

    function queue(uint256 proposalId) external;

    function execute(uint256 proposalId) external payable;

    function cancel(uint256 proposalId) external;

    function castVote(uint256 proposalId, bool support) external;

    function getActions(uint256 proposalId) external view returns (address[] memory targets, uint256[] memory values, string[] memory signatures, bytes[] memory calldatas);

    function getReceipt(uint256 proposalId, address voter) external view returns (Receipt memory);

    function state(uint proposalId) external view returns (ProposalState);

    function quorumVotes() external view returns (uint256);

    function proposalThreshold() external view returns (uint256);
}

// 
interface ITimelock {
  event NewAdmin(address indexed newAdmin);
  event NewPendingAdmin(address indexed newPendingAdmin);
  event NewDelay(uint256 indexed newDelay);
  event CancelTransaction(
    bytes32 indexed txHash,
    address indexed target,
    uint256 value,
    string signature,
    bytes data,
    uint256 eta
  );
  event ExecuteTransaction(
    bytes32 indexed txHash,
    address indexed target,
    uint256 value,
    string signature,
    bytes data,
    uint256 eta
  );
  event QueueTransaction(
    bytes32 indexed txHash,
    address indexed target,
    uint256 value,
    string signature,
    bytes data,
    uint256 eta
  );

  function acceptAdmin() external;

  function queueTransaction(
    address target,
    uint256 value,
    string calldata signature,
    bytes calldata data,
    uint256 eta
  ) external returns (bytes32);

  function cancelTransaction(
    address target,
    uint256 value,
    string calldata signature,
    bytes calldata data,
    uint256 eta
  ) external;

  function executeTransaction(
    address target,
    uint256 value,
    string calldata signature,
    bytes calldata data,
    uint256 eta
  ) external payable returns (bytes memory);

  function delay() external view returns (uint256);

  function GRACE_PERIOD() external view returns (uint256);

  function queuedTransactions(bytes32 hash) external view returns (bool);
}

// 
interface IVotingEscrow {
  enum LockAction { CREATE_LOCK, INCREASE_LOCK_AMOUNT, INCREASE_LOCK_TIME }

  struct LockedBalance {
    uint256 amount;
    uint256 end;
  }

  /** Shared Events */
  event Deposit(address indexed provider, uint256 value, uint256 locktime, LockAction indexed action, uint256 ts);
  event Withdraw(address indexed provider, uint256 value, uint256 ts);
  event Expired();

  function createLock(uint256 _value, uint256 _unlockTime) external;

  function increaseLockAmount(uint256 _value) external;

  function increaseLockLength(uint256 _unlockTime) external;

  function withdraw() external;

  function expireContract() external;

  function name() external view returns (string memory);

  function symbol() external view returns (string memory);

  function decimals() external view returns (uint256);

  function balanceOf(address _owner) external view returns (uint256);

  function balanceOfAt(address _owner, uint256 _blockTime) external view returns (uint256);

  function stakingToken() external view returns (IERC20);
}

// 
interface IAccessController {
  event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
  event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
  event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

  function grantRole(bytes32 role, address account) external;

  function revokeRole(bytes32 role, address account) external;

  function renounceRole(bytes32 role, address account) external;

  function MANAGER_ROLE() external view returns (bytes32);

  function MINTER_ROLE() external view returns (bytes32);

  function hasRole(bytes32 role, address account) external view returns (bool);

  function getRoleMemberCount(bytes32 role) external view returns (uint256);

  function getRoleMember(bytes32 role, uint256 index) external view returns (address);

  function getRoleAdmin(bytes32 role) external view returns (bytes32);
}

// 
interface ISTABLEX is IERC20 {
  function mint(address account, uint256 amount) external;

  function burn(address account, uint256 amount) external;

  function a() external view returns (IAddressProvider);
}

// 
interface AggregatorV3Interface {
  function decimals() external view returns (uint8);

  function description() external view returns (string memory);

  function version() external view returns (uint256);

  function getRoundData(uint80 _roundId)
    external
    view
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    );

  function latestRoundData()
    external
    view
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    );
}

// 
interface IPriceFeed {
  event OracleUpdated(address indexed asset, address oracle, address sender);
  event EurOracleUpdated(address oracle, address sender);

  function setAssetOracle(address _asset, address _oracle) external;

  function setEurOracle(address _oracle) external;

  function a() external view returns (IAddressProvider);

  function assetOracles(address _asset) external view returns (AggregatorV3Interface);

  function eurOracle() external view returns (AggregatorV3Interface);

  function getAssetPrice(address _asset) external view returns (uint256);

  function convertFrom(address _asset, uint256 _amount) external view returns (uint256);

  function convertTo(address _asset, uint256 _amount) external view returns (uint256);
}

// 
interface IRatesManager {
  function a() external view returns (IAddressProvider);

  //current annualized borrow rate
  function annualizedBorrowRate(uint256 _currentBorrowRate) external pure returns (uint256);

  //uses current cumulative rate to calculate totalDebt based on baseDebt at time T0
  function calculateDebt(uint256 _baseDebt, uint256 _cumulativeRate) external pure returns (uint256);

  //uses current cumulative rate to calculate baseDebt at time T0
  function calculateBaseDebt(uint256 _debt, uint256 _cumulativeRate) external pure returns (uint256);

  //calculate a new cumulative rate
  function calculateCumulativeRate(
    uint256 _borrowRate,
    uint256 _cumulativeRate,
    uint256 _timeElapsed
  ) external view returns (uint256);
}

// 
interface ILiquidationManager {
  function a() external view returns (IAddressProvider);

  function calculateHealthFactor(
    uint256 _collateralValue,
    uint256 _vaultDebt,
    uint256 _minRatio
  ) external view returns (uint256 healthFactor);

  function liquidationBonus(address _collateralType, uint256 _amount) external view returns (uint256 bonus);

  function applyLiquidationDiscount(address _collateralType, uint256 _amount)
    external
    view
    returns (uint256 discountedAmount);

  function isHealthy(
    uint256 _collateralValue,
    uint256 _vaultDebt,
    uint256 _minRatio
  ) external view returns (bool);
}

// 
interface IVaultsDataProvider {
  struct Vault {
    // borrowedType support USDX / PAR
    address collateralType;
    address owner;
    uint256 collateralBalance;
    uint256 baseDebt;
    uint256 createdAt;
  }

  //Write
  function createVault(address _collateralType, address _owner) external returns (uint256);

  function setCollateralBalance(uint256 _id, uint256 _balance) external;

  function setBaseDebt(uint256 _id, uint256 _newBaseDebt) external;

  // Read
  function a() external view returns (IAddressProvider);

  function baseDebt(address _collateralType) external view returns (uint256);

  function vaultCount() external view returns (uint256);

  function vaults(uint256 _id) external view returns (Vault memory);

  function vaultOwner(uint256 _id) external view returns (address);

  function vaultCollateralType(uint256 _id) external view returns (address);

  function vaultCollateralBalance(uint256 _id) external view returns (uint256);

  function vaultBaseDebt(uint256 _id) external view returns (uint256);

  function vaultId(address _collateralType, address _owner) external view returns (uint256);

  function vaultExists(uint256 _id) external view returns (bool);

  function vaultDebt(uint256 _vaultId) external view returns (uint256);

  function debt() external view returns (uint256);

  function collateralDebt(address _collateralType) external view returns (uint256);
}

// 
interface IFeeDistributor {
  event PayeeAdded(address indexed account, uint256 shares);
  event FeeReleased(uint256 income, uint256 releasedAt);

  function release() external;

  function changePayees(address[] memory _payees, uint256[] memory _shares) external;

  function a() external view returns (IAddressProvider);

  function lastReleasedAt() external view returns (uint256);

  function getPayees() external view returns (address[] memory);

  function totalShares() external view returns (uint256);

  function shares(address payee) external view returns (uint256);
}

// 
interface IAddressProvider {
  function setAccessController(IAccessController _controller) external;

  function setConfigProvider(IConfigProvider _config) external;

  function setVaultsCore(IVaultsCore _core) external;

  function setStableX(ISTABLEX _stablex) external;

  function setRatesManager(IRatesManager _ratesManager) external;

  function setPriceFeed(IPriceFeed _priceFeed) external;

  function setLiquidationManager(ILiquidationManager _liquidationManager) external;

  function setVaultsDataProvider(IVaultsDataProvider _vaultsData) external;

  function setFeeDistributor(IFeeDistributor _feeDistributor) external;

  function controller() external view returns (IAccessController);

  function config() external view returns (IConfigProvider);

  function core() external view returns (IVaultsCore);

  function stablex() external view returns (ISTABLEX);

  function ratesManager() external view returns (IRatesManager);

  function priceFeed() external view returns (IPriceFeed);

  function liquidationManager() external view returns (ILiquidationManager);

  function vaultsData() external view returns (IVaultsDataProvider);

  function feeDistributor() external view returns (IFeeDistributor);
}

// 
interface IConfigProviderV1 {
  struct CollateralConfig {
    address collateralType;
    uint256 debtLimit;
    uint256 minCollateralRatio;
    uint256 borrowRate;
    uint256 originationFee;
  }

  event CollateralUpdated(
    address indexed collateralType,
    uint256 debtLimit,
    uint256 minCollateralRatio,
    uint256 borrowRate,
    uint256 originationFee
  );
  event CollateralRemoved(address indexed collateralType);

  function setCollateralConfig(
    address _collateralType,
    uint256 _debtLimit,
    uint256 _minCollateralRatio,
    uint256 _borrowRate,
    uint256 _originationFee
  ) external;

  function removeCollateral(address _collateralType) external;

  function setCollateralDebtLimit(address _collateralType, uint256 _debtLimit) external;

  function setCollateralMinCollateralRatio(address _collateralType, uint256 _minCollateralRatio) external;

  function setCollateralBorrowRate(address _collateralType, uint256 _borrowRate) external;

  function setCollateralOriginationFee(address _collateralType, uint256 _originationFee) external;

  function setLiquidationBonus(uint256 _bonus) external;

  function a() external view returns (IAddressProviderV1);

  function collateralConfigs(uint256 _id) external view returns (CollateralConfig memory);

  function collateralIds(address _collateralType) external view returns (uint256);

  function numCollateralConfigs() external view returns (uint256);

  function liquidationBonus() external view returns (uint256);

  function collateralDebtLimit(address _collateralType) external view returns (uint256);

  function collateralMinCollateralRatio(address _collateralType) external view returns (uint256);

  function collateralBorrowRate(address _collateralType) external view returns (uint256);

  function collateralOriginationFee(address _collateralType) external view returns (uint256);
}

// 
interface ILiquidationManagerV1 {
  function a() external view returns (IAddressProviderV1);

  function calculateHealthFactor(
    address _collateralType,
    uint256 _collateralValue,
    uint256 _vaultDebt
  ) external view returns (uint256 healthFactor);

  function liquidationBonus(uint256 _amount) external view returns (uint256 bonus);

  function applyLiquidationDiscount(uint256 _amount) external view returns (uint256 discountedAmount);

  function isHealthy(
    address _collateralType,
    uint256 _collateralValue,
    uint256 _vaultDebt
  ) external view returns (bool);
}

// 
interface IVaultsCoreV1 {
  event Opened(uint256 indexed vaultId, address indexed collateralType, address indexed owner);
  event Deposited(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Withdrawn(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Borrowed(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Repaid(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Liquidated(
    uint256 indexed vaultId,
    uint256 debtRepaid,
    uint256 collateralLiquidated,
    address indexed owner,
    address indexed sender
  );

  event CumulativeRateUpdated(address indexed collateralType, uint256 elapsedTime, uint256 newCumulativeRate); //cumulative interest rate from deployment time T0

  event InsurancePaid(uint256 indexed vaultId, uint256 insuranceAmount, address indexed sender);

  function deposit(address _collateralType, uint256 _amount) external;

  function withdraw(uint256 _vaultId, uint256 _amount) external;

  function withdrawAll(uint256 _vaultId) external;

  function borrow(uint256 _vaultId, uint256 _amount) external;

  function repayAll(uint256 _vaultId) external;

  function repay(uint256 _vaultId, uint256 _amount) external;

  function liquidate(uint256 _vaultId) external;

  //Refresh
  function initializeRates(address _collateralType) external;

  function refresh() external;

  function refreshCollateral(address collateralType) external;

  //upgrade
  function upgrade(address _newVaultsCore) external;

  //Read only

  function a() external view returns (IAddressProviderV1);

  function availableIncome() external view returns (uint256);

  function cumulativeRates(address _collateralType) external view returns (uint256);

  function lastRefresh(address _collateralType) external view returns (uint256);
}

// 
interface IWETH {
  function deposit() external payable;

  function transfer(address to, uint256 value) external returns (bool);

  function withdraw(uint256 wad) external;
}

// 
interface IMIMO is IERC20 {

  function burn(address account, uint256 amount) external;
  
  function mint(address account, uint256 amount) external;

}

// 
interface ISupplyMiner {

  function baseDebtChanged(address user, uint256 newBaseDebt) external;
}

// 
interface IDebtNotifier {

  function debtChanged(uint256 _vaultId) external;

  function setCollateralSupplyMiner(address collateral, ISupplyMiner supplyMiner) external;

  function a() external view returns (IGovernanceAddressProvider);

	function collateralSupplyMinerMapping(address collateral) external view returns (ISupplyMiner);
}

// 
interface IGovernanceAddressProvider {
  function setParallelAddressProvider(IAddressProvider _parallel) external;

  function setMIMO(IMIMO _mimo) external;

  function setDebtNotifier(IDebtNotifier _debtNotifier) external;

  function setGovernorAlpha(IGovernorAlpha _governorAlpha) external;

  function setTimelock(ITimelock _timelock) external;

  function setVotingEscrow(IVotingEscrow _votingEscrow) external;

  function controller() external view returns (IAccessController);

  function parallel() external view returns (IAddressProvider);

  function mimo() external view returns (IMIMO);

  function debtNotifier() external view returns (IDebtNotifier);

  function governorAlpha() external view returns (IGovernorAlpha);

  function timelock() external view returns (ITimelock);

  function votingEscrow() external view returns (IVotingEscrow);
}

// 
interface IVaultsCore {
  event Opened(uint256 indexed vaultId, address indexed collateralType, address indexed owner);
  event Deposited(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Withdrawn(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Borrowed(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Repaid(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Liquidated(
    uint256 indexed vaultId,
    uint256 debtRepaid,
    uint256 collateralLiquidated,
    address indexed owner,
    address indexed sender
  );

  event InsurancePaid(uint256 indexed vaultId, uint256 insuranceAmount, address indexed sender);

  function deposit(address _collateralType, uint256 _amount) external;

  function depositETH() external payable;

  function depositByVaultId(uint256 _vaultId, uint256 _amount) external;

  function depositETHByVaultId(uint256 _vaultId) external payable;

  function depositAndBorrow(
    address _collateralType,
    uint256 _depositAmount,
    uint256 _borrowAmount
  ) external;

  function depositETHAndBorrow(uint256 _borrowAmount) external payable;

  function withdraw(uint256 _vaultId, uint256 _amount) external;

  function withdrawETH(uint256 _vaultId, uint256 _amount) external;

  function borrow(uint256 _vaultId, uint256 _amount) external;

  function repayAll(uint256 _vaultId) external;

  function repay(uint256 _vaultId, uint256 _amount) external;

  function liquidate(uint256 _vaultId) external;

  function liquidatePartial(uint256 _vaultId, uint256 _amount) external;

  function upgrade(address payable _newVaultsCore) external;

  function acceptUpgrade(address payable _oldVaultsCore) external;

  function setDebtNotifier(IDebtNotifier _debtNotifier) external;

  //Read only
  function a() external view returns (IAddressProvider);

  function WETH() external view returns (IWETH);

  function debtNotifier() external view returns (IDebtNotifier);

  function state() external view returns (IVaultsCoreState);

  function cumulativeRates(address _collateralType) external view returns (uint256);
}

// 
interface IAddressProviderV1 {
  function setAccessController(IAccessController _controller) external;

  function setConfigProvider(IConfigProviderV1 _config) external;

  function setVaultsCore(IVaultsCoreV1 _core) external;

  function setStableX(ISTABLEX _stablex) external;

  function setRatesManager(IRatesManager _ratesManager) external;

  function setPriceFeed(IPriceFeed _priceFeed) external;

  function setLiquidationManager(ILiquidationManagerV1 _liquidationManager) external;

  function setVaultsDataProvider(IVaultsDataProvider _vaultsData) external;

  function setFeeDistributor(IFeeDistributor _feeDistributor) external;

  function controller() external view returns (IAccessController);

  function config() external view returns (IConfigProviderV1);

  function core() external view returns (IVaultsCoreV1);

  function stablex() external view returns (ISTABLEX);

  function ratesManager() external view returns (IRatesManager);

  function priceFeed() external view returns (IPriceFeed);

  function liquidationManager() external view returns (ILiquidationManagerV1);

  function vaultsData() external view returns (IVaultsDataProvider);

  function feeDistributor() external view returns (IFeeDistributor);
}

// 
interface IVaultsCoreState {
  event CumulativeRateUpdated(address indexed collateralType, uint256 elapsedTime, uint256 newCumulativeRate); //cumulative interest rate from deployment time T0

  function initializeRates(address _collateralType) external;

  function refresh() external;

  function refreshCollateral(address collateralType) external;

  function syncState(IVaultsCoreState _stateAddress) external;

  function syncStateFromV1(IVaultsCoreV1 _core) external;

  //Read only
  function a() external view returns (IAddressProvider);

  function availableIncome() external view returns (uint256);

  function cumulativeRates(address _collateralType) external view returns (uint256);

  function lastRefresh(address _collateralType) external view returns (uint256);

  function synced() external view returns (bool);
}

// 
interface IConfigProvider {
  struct CollateralConfig {
    address collateralType;
    uint256 debtLimit;
    uint256 liquidationRatio;
    uint256 minCollateralRatio;
    uint256 borrowRate;
    uint256 originationFee;
    uint256 liquidationBonus;
    uint256 liquidationFee;
  }

  event CollateralUpdated(
    address indexed collateralType,
    uint256 debtLimit,
    uint256 liquidationRatio,
    uint256 minCollateralRatio,
    uint256 borrowRate,
    uint256 originationFee,
    uint256 liquidationBonus,
    uint256 liquidationFee
  );
  event CollateralRemoved(address indexed collateralType);

  function setCollateralConfig(
    address _collateralType,
    uint256 _debtLimit,
    uint256 _liquidationRatio,
    uint256 _minCollateralRatio,
    uint256 _borrowRate,
    uint256 _originationFee,
    uint256 _liquidationBonus,
    uint256 _liquidationFee
  ) external;

  function removeCollateral(address _collateralType) external;

  function setCollateralDebtLimit(address _collateralType, uint256 _debtLimit) external;

  function setCollateralLiquidationRatio(address _collateralType, uint256 _liquidationRatio) external;

  function setCollateralMinCollateralRatio(address _collateralType, uint256 _minCollateralRatio) external;

  function setCollateralBorrowRate(address _collateralType, uint256 _borrowRate) external;

  function setCollateralOriginationFee(address _collateralType, uint256 _originationFee) external;

  function setCollateralLiquidationBonus(address _collateralType, uint256 _liquidationBonus) external;

  function setCollateralLiquidationFee(address _collateralType, uint256 _liquidationFee) external;

  function setMinVotingPeriod(uint256 _minVotingPeriod) external;

  function setMaxVotingPeriod(uint256 _maxVotingPeriod) external;

  function setVotingQuorum(uint256 _votingQuorum) external;

  function setProposalThreshold(uint256 _proposalThreshold) external;

  function a() external view returns (IAddressProvider);

  function collateralConfigs(uint256 _id) external view returns (CollateralConfig memory);

  function collateralIds(address _collateralType) external view returns (uint256);

  function numCollateralConfigs() external view returns (uint256);

  function minVotingPeriod() external view returns (uint256);

  function maxVotingPeriod() external view returns (uint256);

  function votingQuorum() external view returns (uint256);

  function proposalThreshold() external view returns (uint256);

  function collateralDebtLimit(address _collateralType) external view returns (uint256);

  function collateralLiquidationRatio(address _collateralType) external view returns (uint256);

  function collateralMinCollateralRatio(address _collateralType) external view returns (uint256);

  function collateralBorrowRate(address _collateralType) external view returns (uint256);

  function collateralOriginationFee(address _collateralType) external view returns (uint256);

  function collateralLiquidationBonus(address _collateralType) external view returns (uint256);

  function collateralLiquidationFee(address _collateralType) external view returns (uint256);
}

// solium-disable security/no-block-members
// 
/**
 * @title  MIMO
 * @notice  MIMO Governance token
 */
contract MIMO is ERC20("MIMO Parallel Governance Token", "MIMO") {
  IGovernanceAddressProvider public a;

  bytes32 public constant MIMO_MINTER_ROLE = keccak256("MIMO_MINTER_ROLE");

  constructor(IGovernanceAddressProvider _a) public {
    require(address(_a) != address(0));

    a = _a;
  }

  modifier onlyMIMOMinter() {
    require(a.controller().hasRole(MIMO_MINTER_ROLE, msg.sender), "Caller is not MIMO Minter");
    _;
  }

  function mint(address account, uint256 amount) public onlyMIMOMinter {
    _mint(account, amount);
  }

  function burn(address account, uint256 amount) public onlyMIMOMinter {
    _burn(account, amount);
  }
}

{
  "compilationTarget": {
    "MIMO.sol": "MIMO"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}