Gauntlet USDT Prime

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

/// @title ConstantsLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Library exposing constants.
library ConstantsLib {
    /// @dev The maximum delay of a timelock.
    uint256 internal constant MAX_TIMELOCK = 2 weeks;

    /// @dev The minimum delay of a timelock.
    uint256 internal constant MIN_TIMELOCK = 1 days;

    /// @dev The maximum number of markets in the supply/withdraw queue.
    uint256 internal constant MAX_QUEUE_LENGTH = 30;

    /// @dev The maximum fee the vault can have (50%).
    uint256 internal constant MAX_FEE = 0.5e18;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError, bytes32) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError, bytes32) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError, bytes32) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.20;

import {MessageHashUtils} from "./MessageHashUtils.sol";
import {ShortStrings, ShortString} from "../ShortStrings.sol";
import {IERC5267} from "../../interfaces/IERC5267.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;

    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;

    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;

    ShortString private immutable _name;
    ShortString private immutable _version;
    string private _nameFallback;
    string private _versionFallback;

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));

        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {IERC-5267}.
     */
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }

    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _name which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Name() internal view returns (string memory) {
        return _name.toStringWithFallback(_nameFallback);
    }

    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _version which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Version() internal view returns (string memory) {
        return _version.toStringWithFallback(_versionFallback);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.20;

import {IERC20Permit} from "./IERC20Permit.sol";
import {ERC20} from "../ERC20.sol";
import {ECDSA} from "../../../utils/cryptography/ECDSA.sol";
import {EIP712} from "../../../utils/cryptography/EIP712.sol";
import {Nonces} from "../../../utils/Nonces.sol";

/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712, Nonces {
    bytes32 private constant PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    /**
     * @dev Permit deadline has expired.
     */
    error ERC2612ExpiredSignature(uint256 deadline);

    /**
     * @dev Mismatched signature.
     */
    error ERC2612InvalidSigner(address signer, address owner);

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}

    /**
     * @inheritdoc IERC20Permit
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        if (block.timestamp > deadline) {
            revert ERC2612ExpiredSignature(deadline);
        }

        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        if (signer != owner) {
            revert ERC2612InvalidSigner(signer, owner);
        }

        _approve(owner, spender, value);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    function nonces(address owner) public view virtual override(IERC20Permit, Nonces) returns (uint256) {
        return super.nonces(owner);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view virtual returns (bytes32) {
        return _domainSeparatorV4();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC4626.sol)

pragma solidity ^0.8.20;

import {IERC20, IERC20Metadata, ERC20} from "../ERC20.sol";
import {SafeERC20} from "../utils/SafeERC20.sol";
import {IERC4626} from "../../../interfaces/IERC4626.sol";
import {Math} from "../../../utils/math/Math.sol";

/**
 * @dev Implementation of the ERC4626 "Tokenized Vault Standard" as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[EIP-4626].
 *
 * This extension allows the minting and burning of "shares" (represented using the ERC20 inheritance) in exchange for
 * underlying "assets" through standardized {deposit}, {mint}, {redeem} and {burn} workflows. This contract extends
 * the ERC20 standard. Any additional extensions included along it would affect the "shares" token represented by this
 * contract and not the "assets" token which is an independent contract.
 *
 * [CAUTION]
 * ====
 * In empty (or nearly empty) ERC-4626 vaults, deposits are at high risk of being stolen through frontrunning
 * with a "donation" to the vault that inflates the price of a share. This is variously known as a donation or inflation
 * attack and is essentially a problem of slippage. Vault deployers can protect against this attack by making an initial
 * deposit of a non-trivial amount of the asset, such that price manipulation becomes infeasible. Withdrawals may
 * similarly be affected by slippage. Users can protect against this attack as well as unexpected slippage in general by
 * verifying the amount received is as expected, using a wrapper that performs these checks such as
 * https://github.com/fei-protocol/ERC4626#erc4626router-and-base[ERC4626Router].
 *
 * Since v4.9, this implementation uses virtual assets and shares to mitigate that risk. The `_decimalsOffset()`
 * corresponds to an offset in the decimal representation between the underlying asset's decimals and the vault
 * decimals. This offset also determines the rate of virtual shares to virtual assets in the vault, which itself
 * determines the initial exchange rate. While not fully preventing the attack, analysis shows that the default offset
 * (0) makes it non-profitable, as a result of the value being captured by the virtual shares (out of the attacker's
 * donation) matching the attacker's expected gains. With a larger offset, the attack becomes orders of magnitude more
 * expensive than it is profitable. More details about the underlying math can be found
 * xref:erc4626.adoc#inflation-attack[here].
 *
 * The drawback of this approach is that the virtual shares do capture (a very small) part of the value being accrued
 * to the vault. Also, if the vault experiences losses, the users try to exit the vault, the virtual shares and assets
 * will cause the first user to exit to experience reduced losses in detriment to the last users that will experience
 * bigger losses. Developers willing to revert back to the pre-v4.9 behavior just need to override the
 * `_convertToShares` and `_convertToAssets` functions.
 *
 * To learn more, check out our xref:ROOT:erc4626.adoc[ERC-4626 guide].
 * ====
 */
abstract contract ERC4626 is ERC20, IERC4626 {
    using Math for uint256;

    IERC20 private immutable _asset;
    uint8 private immutable _underlyingDecimals;

    /**
     * @dev Attempted to deposit more assets than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxDeposit(address receiver, uint256 assets, uint256 max);

    /**
     * @dev Attempted to mint more shares than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxMint(address receiver, uint256 shares, uint256 max);

    /**
     * @dev Attempted to withdraw more assets than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxWithdraw(address owner, uint256 assets, uint256 max);

    /**
     * @dev Attempted to redeem more shares than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxRedeem(address owner, uint256 shares, uint256 max);

    /**
     * @dev Set the underlying asset contract. This must be an ERC20-compatible contract (ERC20 or ERC777).
     */
    constructor(IERC20 asset_) {
        (bool success, uint8 assetDecimals) = _tryGetAssetDecimals(asset_);
        _underlyingDecimals = success ? assetDecimals : 18;
        _asset = asset_;
    }

    /**
     * @dev Attempts to fetch the asset decimals. A return value of false indicates that the attempt failed in some way.
     */
    function _tryGetAssetDecimals(IERC20 asset_) private view returns (bool, uint8) {
        (bool success, bytes memory encodedDecimals) = address(asset_).staticcall(
            abi.encodeCall(IERC20Metadata.decimals, ())
        );
        if (success && encodedDecimals.length >= 32) {
            uint256 returnedDecimals = abi.decode(encodedDecimals, (uint256));
            if (returnedDecimals <= type(uint8).max) {
                return (true, uint8(returnedDecimals));
            }
        }
        return (false, 0);
    }

    /**
     * @dev Decimals are computed by adding the decimal offset on top of the underlying asset's decimals. This
     * "original" value is cached during construction of the vault contract. If this read operation fails (e.g., the
     * asset has not been created yet), a default of 18 is used to represent the underlying asset's decimals.
     *
     * See {IERC20Metadata-decimals}.
     */
    function decimals() public view virtual override(IERC20Metadata, ERC20) returns (uint8) {
        return _underlyingDecimals + _decimalsOffset();
    }

    /** @dev See {IERC4626-asset}. */
    function asset() public view virtual returns (address) {
        return address(_asset);
    }

    /** @dev See {IERC4626-totalAssets}. */
    function totalAssets() public view virtual returns (uint256) {
        return _asset.balanceOf(address(this));
    }

    /** @dev See {IERC4626-convertToShares}. */
    function convertToShares(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-convertToAssets}. */
    function convertToAssets(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-maxDeposit}. */
    function maxDeposit(address) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /** @dev See {IERC4626-maxMint}. */
    function maxMint(address) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /** @dev See {IERC4626-maxWithdraw}. */
    function maxWithdraw(address owner) public view virtual returns (uint256) {
        return _convertToAssets(balanceOf(owner), Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-maxRedeem}. */
    function maxRedeem(address owner) public view virtual returns (uint256) {
        return balanceOf(owner);
    }

    /** @dev See {IERC4626-previewDeposit}. */
    function previewDeposit(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-previewMint}. */
    function previewMint(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Ceil);
    }

    /** @dev See {IERC4626-previewWithdraw}. */
    function previewWithdraw(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Ceil);
    }

    /** @dev See {IERC4626-previewRedeem}. */
    function previewRedeem(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-deposit}. */
    function deposit(uint256 assets, address receiver) public virtual returns (uint256) {
        uint256 maxAssets = maxDeposit(receiver);
        if (assets > maxAssets) {
            revert ERC4626ExceededMaxDeposit(receiver, assets, maxAssets);
        }

        uint256 shares = previewDeposit(assets);
        _deposit(_msgSender(), receiver, assets, shares);

        return shares;
    }

    /** @dev See {IERC4626-mint}.
     *
     * As opposed to {deposit}, minting is allowed even if the vault is in a state where the price of a share is zero.
     * In this case, the shares will be minted without requiring any assets to be deposited.
     */
    function mint(uint256 shares, address receiver) public virtual returns (uint256) {
        uint256 maxShares = maxMint(receiver);
        if (shares > maxShares) {
            revert ERC4626ExceededMaxMint(receiver, shares, maxShares);
        }

        uint256 assets = previewMint(shares);
        _deposit(_msgSender(), receiver, assets, shares);

        return assets;
    }

    /** @dev See {IERC4626-withdraw}. */
    function withdraw(uint256 assets, address receiver, address owner) public virtual returns (uint256) {
        uint256 maxAssets = maxWithdraw(owner);
        if (assets > maxAssets) {
            revert ERC4626ExceededMaxWithdraw(owner, assets, maxAssets);
        }

        uint256 shares = previewWithdraw(assets);
        _withdraw(_msgSender(), receiver, owner, assets, shares);

        return shares;
    }

    /** @dev See {IERC4626-redeem}. */
    function redeem(uint256 shares, address receiver, address owner) public virtual returns (uint256) {
        uint256 maxShares = maxRedeem(owner);
        if (shares > maxShares) {
            revert ERC4626ExceededMaxRedeem(owner, shares, maxShares);
        }

        uint256 assets = previewRedeem(shares);
        _withdraw(_msgSender(), receiver, owner, assets, shares);

        return assets;
    }

    /**
     * @dev Internal conversion function (from assets to shares) with support for rounding direction.
     */
    function _convertToShares(uint256 assets, Math.Rounding rounding) internal view virtual returns (uint256) {
        return assets.mulDiv(totalSupply() + 10 ** _decimalsOffset(), totalAssets() + 1, rounding);
    }

    /**
     * @dev Internal conversion function (from shares to assets) with support for rounding direction.
     */
    function _convertToAssets(uint256 shares, Math.Rounding rounding) internal view virtual returns (uint256) {
        return shares.mulDiv(totalAssets() + 1, totalSupply() + 10 ** _decimalsOffset(), rounding);
    }

    /**
     * @dev Deposit/mint common workflow.
     */
    function _deposit(address caller, address receiver, uint256 assets, uint256 shares) internal virtual {
        // If _asset is ERC777, `transferFrom` can trigger a reentrancy BEFORE the transfer happens through the
        // `tokensToSend` hook. On the other hand, the `tokenReceived` hook, that is triggered after the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer before we mint so that any reentrancy would happen before the
        // assets are transferred and before the shares are minted, which is a valid state.
        // slither-disable-next-line reentrancy-no-eth
        SafeERC20.safeTransferFrom(_asset, caller, address(this), assets);
        _mint(receiver, shares);

        emit Deposit(caller, receiver, assets, shares);
    }

    /**
     * @dev Withdraw/redeem common workflow.
     */
    function _withdraw(
        address caller,
        address receiver,
        address owner,
        uint256 assets,
        uint256 shares
    ) internal virtual {
        if (caller != owner) {
            _spendAllowance(owner, caller, shares);
        }

        // If _asset is ERC777, `transfer` can trigger a reentrancy AFTER the transfer happens through the
        // `tokensReceived` hook. On the other hand, the `tokensToSend` hook, that is triggered before the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer after the burn so that any reentrancy would happen after the
        // shares are burned and after the assets are transferred, which is a valid state.
        _burn(owner, shares);
        SafeERC20.safeTransfer(_asset, receiver, assets);

        emit Withdraw(caller, receiver, owner, assets, shares);
    }

    function _decimalsOffset() internal view virtual returns (uint8) {
        return 0;
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

/// @title ErrorsLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Library exposing error messages.
library ErrorsLib {
    /// @notice Thrown when the caller is not the owner.
    string internal constant NOT_OWNER = "not owner";

    /// @notice Thrown when the LLTV to enable exceeds the maximum LLTV.
    string internal constant MAX_LLTV_EXCEEDED = "max LLTV exceeded";

    /// @notice Thrown when the fee to set exceeds the maximum fee.
    string internal constant MAX_FEE_EXCEEDED = "max fee exceeded";

    /// @notice Thrown when the value is already set.
    string internal constant ALREADY_SET = "already set";

    /// @notice Thrown when the IRM is not enabled at market creation.
    string internal constant IRM_NOT_ENABLED = "IRM not enabled";

    /// @notice Thrown when the LLTV is not enabled at market creation.
    string internal constant LLTV_NOT_ENABLED = "LLTV not enabled";

    /// @notice Thrown when the market is already created.
    string internal constant MARKET_ALREADY_CREATED = "market already created";

    /// @notice Thrown when a token to transfer doesn't have code.
    string internal constant NO_CODE = "no code";

    /// @notice Thrown when the market is not created.
    string internal constant MARKET_NOT_CREATED = "market not created";

    /// @notice Thrown when not exactly one of the input amount is zero.
    string internal constant INCONSISTENT_INPUT = "inconsistent input";

    /// @notice Thrown when zero assets is passed as input.
    string internal constant ZERO_ASSETS = "zero assets";

    /// @notice Thrown when a zero address is passed as input.
    string internal constant ZERO_ADDRESS = "zero address";

    /// @notice Thrown when the caller is not authorized to conduct an action.
    string internal constant UNAUTHORIZED = "unauthorized";

    /// @notice Thrown when the collateral is insufficient to `borrow` or `withdrawCollateral`.
    string internal constant INSUFFICIENT_COLLATERAL = "insufficient collateral";

    /// @notice Thrown when the liquidity is insufficient to `withdraw` or `borrow`.
    string internal constant INSUFFICIENT_LIQUIDITY = "insufficient liquidity";

    /// @notice Thrown when the position to liquidate is healthy.
    string internal constant HEALTHY_POSITION = "position is healthy";

    /// @notice Thrown when the authorization signature is invalid.
    string internal constant INVALID_SIGNATURE = "invalid signature";

    /// @notice Thrown when the authorization signature is expired.
    string internal constant SIGNATURE_EXPIRED = "signature expired";

    /// @notice Thrown when the nonce is invalid.
    string internal constant INVALID_NONCE = "invalid nonce";

    /// @notice Thrown when a token transfer reverted.
    string internal constant TRANSFER_REVERTED = "transfer reverted";

    /// @notice Thrown when a token transfer returned false.
    string internal constant TRANSFER_RETURNED_FALSE = "transfer returned false";

    /// @notice Thrown when a token transferFrom reverted.
    string internal constant TRANSFER_FROM_REVERTED = "transferFrom reverted";

    /// @notice Thrown when a token transferFrom returned false
    string internal constant TRANSFER_FROM_RETURNED_FALSE = "transferFrom returned false";

    /// @notice Thrown when the maximum uint128 is exceeded.
    string internal constant MAX_UINT128_EXCEEDED = "max uint128 exceeded";
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {Id} from "../../lib/morpho-blue/src/interfaces/IMorpho.sol";

import {PendingAddress} from "./PendingLib.sol";

/// @title EventsLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Library exposing events.
library EventsLib {
    /// @notice Emitted when a pending `newTimelock` is submitted.
    event SubmitTimelock(uint256 newTimelock);

    /// @notice Emitted when `timelock` is set to `newTimelock`.
    event SetTimelock(address indexed caller, uint256 newTimelock);

    /// @notice Emitted when `skimRecipient` is set to `newSkimRecipient`.
    event SetSkimRecipient(address indexed newSkimRecipient);

    /// @notice Emitted `fee` is set to `newFee`.
    event SetFee(address indexed caller, uint256 newFee);

    /// @notice Emitted when a new `newFeeRecipient` is set.
    event SetFeeRecipient(address indexed newFeeRecipient);

    /// @notice Emitted when a pending `newGuardian` is submitted.
    event SubmitGuardian(address indexed newGuardian);

    /// @notice Emitted when `guardian` is set to `newGuardian`.
    event SetGuardian(address indexed caller, address indexed guardian);

    /// @notice Emitted when a pending `cap` is submitted for market identified by `id`.
    event SubmitCap(address indexed caller, Id indexed id, uint256 cap);

    /// @notice Emitted when a new `cap` is set for market identified by `id`.
    event SetCap(address indexed caller, Id indexed id, uint256 cap);

    /// @notice Emitted when the vault's last total assets is updated to `updatedTotalAssets`.
    event UpdateLastTotalAssets(uint256 updatedTotalAssets);

    /// @notice Emitted when the market identified by `id` is submitted for removal.
    event SubmitMarketRemoval(address indexed caller, Id indexed id);

    /// @notice Emitted when `curator` is set to `newCurator`.
    event SetCurator(address indexed newCurator);

    /// @notice Emitted when an `allocator` is set to `isAllocator`.
    event SetIsAllocator(address indexed allocator, bool isAllocator);

    /// @notice Emitted when a `pendingTimelock` is revoked.
    event RevokePendingTimelock(address indexed caller);

    /// @notice Emitted when a `pendingCap` for the market identified by `id` is revoked.
    event RevokePendingCap(address indexed caller, Id indexed id);

    /// @notice Emitted when a `pendingGuardian` is revoked.
    event RevokePendingGuardian(address indexed caller);

    /// @notice Emitted when a pending market removal is revoked.
    event RevokePendingMarketRemoval(address indexed caller, Id indexed id);

    /// @notice Emitted when the `supplyQueue` is set to `newSupplyQueue`.
    event SetSupplyQueue(address indexed caller, Id[] newSupplyQueue);

    /// @notice Emitted when the `withdrawQueue` is set to `newWithdrawQueue`.
    event SetWithdrawQueue(address indexed caller, Id[] newWithdrawQueue);

    /// @notice Emitted when a reallocation supplies assets to the market identified by `id`.
    /// @param id The id of the market.
    /// @param suppliedAssets The amount of assets supplied to the market.
    /// @param suppliedShares The amount of shares minted.
    event ReallocateSupply(address indexed caller, Id indexed id, uint256 suppliedAssets, uint256 suppliedShares);

    /// @notice Emitted when a reallocation withdraws assets from the market identified by `id`.
    /// @param id The id of the market.
    /// @param withdrawnAssets The amount of assets withdrawn from the market.
    /// @param withdrawnShares The amount of shares burned.
    event ReallocateWithdraw(address indexed caller, Id indexed id, uint256 withdrawnAssets, uint256 withdrawnShares);

    /// @notice Emitted when interest are accrued.
    /// @param newTotalAssets The assets of the vault after accruing the interest but before the interaction.
    /// @param feeShares The shares minted to the fee recipient.
    event AccrueInterest(uint256 newTotalAssets, uint256 feeShares);

    /// @notice Emitted when an `amount` of `token` is transferred to the skim recipient by `caller`.
    event Skim(address indexed caller, address indexed token, uint256 amount);

    /// @notice Emitted when a new MetaMorpho vault is created.
    /// @param metaMorpho The address of the MetaMorpho vault.
    /// @param caller The caller of the function.
    /// @param initialOwner The initial owner of the MetaMorpho vault.
    /// @param initialTimelock The initial timelock of the MetaMorpho vault.
    /// @param asset The address of the underlying asset.
    /// @param name The name of the MetaMorpho vault.
    /// @param symbol The symbol of the MetaMorpho vault.
    /// @param salt The salt used for the MetaMorpho vault's CREATE2 address.
    event CreateMetaMorpho(
        address indexed metaMorpho,
        address indexed caller,
        address initialOwner,
        uint256 initialTimelock,
        address indexed asset,
        string name,
        string symbol,
        bytes32 salt
    );
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";
import {IERC20Metadata} from "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.20;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

import {MarketParams, Market} from "./IMorpho.sol";

/// @title IIrm
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Interface that Interest Rate Models (IRMs) used by Morpho must implement.
interface IIrm {
    /// @notice Returns the borrow rate per second (scaled by WAD) of the market `marketParams`.
    /// @dev Assumes that `market` corresponds to `marketParams`.
    function borrowRate(MarketParams memory marketParams, Market memory market) external returns (uint256);

    /// @notice Returns the borrow rate per second (scaled by WAD) of the market `marketParams` without modifying any
    /// storage.
    /// @dev Assumes that `market` corresponds to `marketParams`.
    function borrowRateView(MarketParams memory marketParams, Market memory market) external view returns (uint256);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

import {IMorpho, Id, MarketParams} from "../../lib/morpho-blue/src/interfaces/IMorpho.sol";
import {IERC4626} from "../../lib/openzeppelin-contracts/contracts/interfaces/IERC4626.sol";
import {IERC20Permit} from "../../lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Permit.sol";

import {MarketConfig, PendingUint192, PendingAddress} from "../libraries/PendingLib.sol";

struct MarketAllocation {
    /// @notice The market to allocate.
    MarketParams marketParams;
    /// @notice The amount of assets to allocate.
    uint256 assets;
}

interface IMulticall {
    function multicall(bytes[] calldata) external returns (bytes[] memory);
}

interface IOwnable {
    function owner() external view returns (address);
    function transferOwnership(address) external;
    function renounceOwnership() external;
    function acceptOwnership() external;
    function pendingOwner() external view returns (address);
}

/// @dev This interface is used for factorizing IMetaMorphoStaticTyping and IMetaMorpho.
/// @dev Consider using the IMetaMorpho interface instead of this one.
interface IMetaMorphoBase {
    /// @notice The address of the Morpho contract.
    function MORPHO() external view returns (IMorpho);
    function DECIMALS_OFFSET() external view returns (uint8);

    /// @notice The address of the curator.
    function curator() external view returns (address);

    /// @notice Stores whether an address is an allocator or not.
    function isAllocator(address target) external view returns (bool);

    /// @notice The current guardian. Can be set even without the timelock set.
    function guardian() external view returns (address);

    /// @notice The current fee.
    function fee() external view returns (uint96);

    /// @notice The fee recipient.
    function feeRecipient() external view returns (address);

    /// @notice The skim recipient.
    function skimRecipient() external view returns (address);

    /// @notice The current timelock.
    function timelock() external view returns (uint256);

    /// @dev Stores the order of markets on which liquidity is supplied upon deposit.
    /// @dev Can contain any market. A market is skipped as soon as its supply cap is reached.
    function supplyQueue(uint256) external view returns (Id);

    /// @notice Returns the length of the supply queue.
    function supplyQueueLength() external view returns (uint256);

    /// @dev Stores the order of markets from which liquidity is withdrawn upon withdrawal.
    /// @dev Always contain all non-zero cap markets as well as all markets on which the vault supplies liquidity,
    /// without duplicate.
    function withdrawQueue(uint256) external view returns (Id);

    /// @notice Returns the length of the withdraw queue.
    function withdrawQueueLength() external view returns (uint256);

    /// @notice Stores the total assets managed by this vault when the fee was last accrued.
    /// @dev May be greater than `totalAssets()` due to removal of markets with non-zero supply or socialized bad debt.
    /// This difference will decrease the fee accrued until one of the functions updating `lastTotalAssets` is
    /// triggered (deposit/mint/withdraw/redeem/setFee/setFeeRecipient).
    function lastTotalAssets() external view returns (uint256);

    /// @notice Submits a `newTimelock`.
    /// @dev Warning: Reverts if a timelock is already pending. Revoke the pending timelock to overwrite it.
    /// @dev In case the new timelock is higher than the current one, the timelock is set immediately.
    function submitTimelock(uint256 newTimelock) external;

    /// @notice Accepts the pending timelock.
    function acceptTimelock() external;

    /// @notice Revokes the pending timelock.
    /// @dev Does not revert if there is no pending timelock.
    function revokePendingTimelock() external;

    /// @notice Submits a `newSupplyCap` for the market defined by `marketParams`.
    /// @dev Warning: Reverts if a cap is already pending. Revoke the pending cap to overwrite it.
    /// @dev Warning: Reverts if a market removal is pending.
    /// @dev In case the new cap is lower than the current one, the cap is set immediately.
    function submitCap(MarketParams memory marketParams, uint256 newSupplyCap) external;

    /// @notice Accepts the pending cap of the market defined by `marketParams`.
    function acceptCap(MarketParams memory marketParams) external;

    /// @notice Revokes the pending cap of the market defined by `id`.
    /// @dev Does not revert if there is no pending cap.
    function revokePendingCap(Id id) external;

    /// @notice Submits a forced market removal from the vault, eventually losing all funds supplied to the market.
    /// @notice Funds can be recovered by enabling this market again and withdrawing from it (using `reallocate`),
    /// but funds will be distributed pro-rata to the shares at the time of withdrawal, not at the time of removal.
    /// @notice This forced removal is expected to be used as an emergency process in case a market constantly reverts.
    /// To softly remove a sane market, the curator role is expected to bundle a reallocation that empties the market
    /// first (using `reallocate`), followed by the removal of the market (using `updateWithdrawQueue`).
    /// @dev Warning: Removing a market with non-zero supply will instantly impact the vault's price per share.
    /// @dev Warning: Reverts for non-zero cap or if there is a pending cap. Successfully submitting a zero cap will
    /// prevent such reverts.
    function submitMarketRemoval(MarketParams memory marketParams) external;

    /// @notice Revokes the pending removal of the market defined by `id`.
    /// @dev Does not revert if there is no pending market removal.
    function revokePendingMarketRemoval(Id id) external;

    /// @notice Submits a `newGuardian`.
    /// @notice Warning: a malicious guardian could disrupt the vault's operation, and would have the power to revoke
    /// any pending guardian.
    /// @dev In case there is no guardian, the gardian is set immediately.
    /// @dev Warning: Submitting a gardian will overwrite the current pending gardian.
    function submitGuardian(address newGuardian) external;

    /// @notice Accepts the pending guardian.
    function acceptGuardian() external;

    /// @notice Revokes the pending guardian.
    function revokePendingGuardian() external;

    /// @notice Skims the vault `token` balance to `skimRecipient`.
    function skim(address) external;

    /// @notice Sets `newAllocator` as an allocator or not (`newIsAllocator`).
    function setIsAllocator(address newAllocator, bool newIsAllocator) external;

    /// @notice Sets `curator` to `newCurator`.
    function setCurator(address newCurator) external;

    /// @notice Sets the `fee` to `newFee`.
    function setFee(uint256 newFee) external;

    /// @notice Sets `feeRecipient` to `newFeeRecipient`.
    function setFeeRecipient(address newFeeRecipient) external;

    /// @notice Sets `skimRecipient` to `newSkimRecipient`.
    function setSkimRecipient(address newSkimRecipient) external;

    /// @notice Sets `supplyQueue` to `newSupplyQueue`.
    /// @param newSupplyQueue is an array of enabled markets, and can contain duplicate markets, but it would only
    /// increase the cost of depositing to the vault.
    function setSupplyQueue(Id[] calldata newSupplyQueue) external;

    /// @notice Updates the withdraw queue. Some markets can be removed, but no market can be added.
    /// @notice Removing a market requires the vault to have 0 supply on it, or to have previously submitted a removal
    /// for this market (with the function `submitMarketRemoval`).
    /// @notice Warning: Anyone can supply on behalf of the vault so the call to `updateWithdrawQueue` that expects a
    /// market to be empty can be griefed by a front-run. To circumvent this, the allocator can simply bundle a
    /// reallocation that withdraws max from this market with a call to `updateWithdrawQueue`.
    /// @dev Warning: Removing a market with supply will decrease the fee accrued until one of the functions updating
    /// `lastTotalAssets` is triggered (deposit/mint/withdraw/redeem/setFee/setFeeRecipient).
    /// @dev Warning: `updateWithdrawQueue` is not idempotent. Submitting twice the same tx will change the queue twice.
    /// @param indexes The indexes of each market in the previous withdraw queue, in the new withdraw queue's order.
    function updateWithdrawQueue(uint256[] calldata indexes) external;

    /// @notice Reallocates the vault's liquidity so as to reach a given allocation of assets on each given market.
    /// @notice The allocator can withdraw from any market, even if it's not in the withdraw queue, as long as the loan
    /// token of the market is the same as the vault's asset.
    /// @dev The behavior of the reallocation can be altered by state changes, including:
    /// - Deposits on the vault that supplies to markets that are expected to be supplied to during reallocation.
    /// - Withdrawals from the vault that withdraws from markets that are expected to be withdrawn from during
    /// reallocation.
    /// - Donations to the vault on markets that are expected to be supplied to during reallocation.
    /// - Withdrawals from markets that are expected to be withdrawn from during reallocation.
    /// @dev Sender is expected to pass `assets = type(uint256).max` with the last MarketAllocation of `allocations` to
    /// supply all the remaining withdrawn liquidity, which would ensure that `totalWithdrawn` = `totalSupplied`.
    function reallocate(MarketAllocation[] calldata allocations) external;
}

/// @dev This interface is inherited by MetaMorpho so that function signatures are checked by the compiler.
/// @dev Consider using the IMetaMorpho interface instead of this one.
interface IMetaMorphoStaticTyping is IMetaMorphoBase {
    /// @notice Returns the current configuration of each market.
    function config(Id) external view returns (uint184 cap, bool enabled, uint64 removableAt);

    /// @notice Returns the pending guardian.
    function pendingGuardian() external view returns (address guardian, uint64 validAt);

    /// @notice Returns the pending cap for each market.
    function pendingCap(Id) external view returns (uint192 value, uint64 validAt);

    /// @notice Returns the pending timelock.
    function pendingTimelock() external view returns (uint192 value, uint64 validAt);
}

/// @title IMetaMorpho
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @dev Use this interface for MetaMorpho to have access to all the functions with the appropriate function signatures.
interface IMetaMorpho is IMetaMorphoBase, IERC4626, IERC20Permit, IOwnable, IMulticall {
    /// @notice Returns the current configuration of each market.
    function config(Id) external view returns (MarketConfig memory);

    /// @notice Returns the pending guardian.
    function pendingGuardian() external view returns (PendingAddress memory);

    /// @notice Returns the pending cap for each market.
    function pendingCap(Id) external view returns (PendingUint192 memory);

    /// @notice Returns the pending timelock.
    function pendingTimelock() external view returns (PendingUint192 memory);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

type Id is bytes32;

struct MarketParams {
    address loanToken;
    address collateralToken;
    address oracle;
    address irm;
    uint256 lltv;
}

/// @dev Warning: For `feeRecipient`, `supplyShares` does not contain the accrued shares since the last interest
/// accrual.
struct Position {
    uint256 supplyShares;
    uint128 borrowShares;
    uint128 collateral;
}

/// @dev Warning: `totalSupplyAssets` does not contain the accrued interest since the last interest accrual.
/// @dev Warning: `totalBorrowAssets` does not contain the accrued interest since the last interest accrual.
/// @dev Warning: `totalSupplyShares` does not contain the additional shares accrued by `feeRecipient` since the last
/// interest accrual.
struct Market {
    uint128 totalSupplyAssets;
    uint128 totalSupplyShares;
    uint128 totalBorrowAssets;
    uint128 totalBorrowShares;
    uint128 lastUpdate;
    uint128 fee;
}

struct Authorization {
    address authorizer;
    address authorized;
    bool isAuthorized;
    uint256 nonce;
    uint256 deadline;
}

struct Signature {
    uint8 v;
    bytes32 r;
    bytes32 s;
}

/// @dev This interface is used for factorizing IMorphoStaticTyping and IMorpho.
/// @dev Consider using the IMorpho interface instead of this one.
interface IMorphoBase {
    /// @notice The EIP-712 domain separator.
    /// @dev Warning: Every EIP-712 signed message based on this domain separator can be reused on another chain sharing
    /// the same chain id because the domain separator would be the same.
    function DOMAIN_SEPARATOR() external view returns (bytes32);

    /// @notice The owner of the contract.
    /// @dev It has the power to change the owner.
    /// @dev It has the power to set fees on markets and set the fee recipient.
    /// @dev It has the power to enable but not disable IRMs and LLTVs.
    function owner() external view returns (address);

    /// @notice The fee recipient of all markets.
    /// @dev The recipient receives the fees of a given market through a supply position on that market.
    function feeRecipient() external view returns (address);

    /// @notice Whether the `irm` is enabled.
    function isIrmEnabled(address irm) external view returns (bool);

    /// @notice Whether the `lltv` is enabled.
    function isLltvEnabled(uint256 lltv) external view returns (bool);

    /// @notice Whether `authorized` is authorized to modify `authorizer`'s position on all markets.
    /// @dev Anyone is authorized to modify their own positions, regardless of this variable.
    function isAuthorized(address authorizer, address authorized) external view returns (bool);

    /// @notice The `authorizer`'s current nonce. Used to prevent replay attacks with EIP-712 signatures.
    function nonce(address authorizer) external view returns (uint256);

    /// @notice Sets `newOwner` as `owner` of the contract.
    /// @dev Warning: No two-step transfer ownership.
    /// @dev Warning: The owner can be set to the zero address.
    function setOwner(address newOwner) external;

    /// @notice Enables `irm` as a possible IRM for market creation.
    /// @dev Warning: It is not possible to disable an IRM.
    function enableIrm(address irm) external;

    /// @notice Enables `lltv` as a possible LLTV for market creation.
    /// @dev Warning: It is not possible to disable a LLTV.
    function enableLltv(uint256 lltv) external;

    /// @notice Sets the `newFee` for the given market `marketParams`.
    /// @param newFee The new fee, scaled by WAD.
    /// @dev Warning: The recipient can be the zero address.
    function setFee(MarketParams memory marketParams, uint256 newFee) external;

    /// @notice Sets `newFeeRecipient` as `feeRecipient` of the fee.
    /// @dev Warning: If the fee recipient is set to the zero address, fees will accrue there and will be lost.
    /// @dev Modifying the fee recipient will allow the new recipient to claim any pending fees not yet accrued. To
    /// ensure that the current recipient receives all due fees, accrue interest manually prior to making any changes.
    function setFeeRecipient(address newFeeRecipient) external;

    /// @notice Creates the market `marketParams`.
    /// @dev Here is the list of assumptions on the market's dependencies (tokens, IRM and oracle) that guarantees
    /// Morpho behaves as expected:
    /// - The token should be ERC-20 compliant, except that it can omit return values on `transfer` and `transferFrom`.
    /// - The token balance of Morpho should only decrease on `transfer` and `transferFrom`. In particular, tokens with
    /// burn functions are not supported.
    /// - The token should not re-enter Morpho on `transfer` nor `transferFrom`.
    /// - The token balance of the sender (resp. receiver) should decrease (resp. increase) by exactly the given amount
    /// on `transfer` and `transferFrom`. In particular, tokens with fees on transfer are not supported.
    /// - The IRM should not re-enter Morpho.
    /// - The oracle should return a price with the correct scaling.
    /// @dev Here is a list of properties on the market's dependencies that could break Morpho's liveness properties
    /// (funds could get stuck):
    /// - The token can revert on `transfer` and `transferFrom` for a reason other than an approval or balance issue.
    /// - A very high amount of assets (~1e35) supplied or borrowed can make the computation of `toSharesUp` and
    /// `toSharesDown` overflow.
    /// - The IRM can revert on `borrowRate`.
    /// - A very high borrow rate returned by the IRM can make the computation of `interest` in `_accrueInterest`
    /// overflow.
    /// - The oracle can revert on `price`. Note that this can be used to prevent `borrow`, `withdrawCollateral` and
    /// `liquidate` from being used under certain market conditions.
    /// - A very high price returned by the oracle can make the computation of `maxBorrow` in `_isHealthy` overflow, or
    /// the computation of `assetsRepaid` in `liquidate` overflow.
    /// @dev The borrow share price of a market with less than 1e4 assets borrowed can be decreased by manipulations, to
    /// the point where `totalBorrowShares` is very large and borrowing overflows.
    function createMarket(MarketParams memory marketParams) external;

    /// @notice Supplies `assets` or `shares` on behalf of `onBehalf`, optionally calling back the caller's
    /// `onMorphoSupply` function with the given `data`.
    /// @dev Either `assets` or `shares` should be zero. Most use cases should rely on `assets` as an input so the
    /// caller is guaranteed to have `assets` tokens pulled from their balance, but the possibility to mint a specific
    /// amount of shares is given for full compatibility and precision.
    /// @dev Supplying a large amount can revert for overflow.
    /// @dev Supplying an amount of shares may lead to supply more or fewer assets than expected due to slippage.
    /// Consider using the `assets` parameter to avoid this.
    /// @param marketParams The market to supply assets to.
    /// @param assets The amount of assets to supply.
    /// @param shares The amount of shares to mint.
    /// @param onBehalf The address that will own the increased supply position.
    /// @param data Arbitrary data to pass to the `onMorphoSupply` callback. Pass empty data if not needed.
    /// @return assetsSupplied The amount of assets supplied.
    /// @return sharesSupplied The amount of shares minted.
    function supply(
        MarketParams memory marketParams,
        uint256 assets,
        uint256 shares,
        address onBehalf,
        bytes memory data
    ) external returns (uint256 assetsSupplied, uint256 sharesSupplied);

    /// @notice Withdraws `assets` or `shares` on behalf of `onBehalf` and sends the assets to `receiver`.
    /// @dev Either `assets` or `shares` should be zero. To withdraw max, pass the `shares`'s balance of `onBehalf`.
    /// @dev `msg.sender` must be authorized to manage `onBehalf`'s positions.
    /// @dev Withdrawing an amount corresponding to more shares than supplied will revert for underflow.
    /// @dev It is advised to use the `shares` input when withdrawing the full position to avoid reverts due to
    /// conversion roundings between shares and assets.
    /// @param marketParams The market to withdraw assets from.
    /// @param assets The amount of assets to withdraw.
    /// @param shares The amount of shares to burn.
    /// @param onBehalf The address of the owner of the supply position.
    /// @param receiver The address that will receive the withdrawn assets.
    /// @return assetsWithdrawn The amount of assets withdrawn.
    /// @return sharesWithdrawn The amount of shares burned.
    function withdraw(
        MarketParams memory marketParams,
        uint256 assets,
        uint256 shares,
        address onBehalf,
        address receiver
    ) external returns (uint256 assetsWithdrawn, uint256 sharesWithdrawn);

    /// @notice Borrows `assets` or `shares` on behalf of `onBehalf` and sends the assets to `receiver`.
    /// @dev Either `assets` or `shares` should be zero. Most use cases should rely on `assets` as an input so the
    /// caller is guaranteed to borrow `assets` of tokens, but the possibility to mint a specific amount of shares is
    /// given for full compatibility and precision.
    /// @dev `msg.sender` must be authorized to manage `onBehalf`'s positions.
    /// @dev Borrowing a large amount can revert for overflow.
    /// @dev Borrowing an amount of shares may lead to borrow fewer assets than expected due to slippage.
    /// Consider using the `assets` parameter to avoid this.
    /// @param marketParams The market to borrow assets from.
    /// @param assets The amount of assets to borrow.
    /// @param shares The amount of shares to mint.
    /// @param onBehalf The address that will own the increased borrow position.
    /// @param receiver The address that will receive the borrowed assets.
    /// @return assetsBorrowed The amount of assets borrowed.
    /// @return sharesBorrowed The amount of shares minted.
    function borrow(
        MarketParams memory marketParams,
        uint256 assets,
        uint256 shares,
        address onBehalf,
        address receiver
    ) external returns (uint256 assetsBorrowed, uint256 sharesBorrowed);

    /// @notice Repays `assets` or `shares` on behalf of `onBehalf`, optionally calling back the caller's
    /// `onMorphoReplay` function with the given `data`.
    /// @dev Either `assets` or `shares` should be zero. To repay max, pass the `shares`'s balance of `onBehalf`.
    /// @dev Repaying an amount corresponding to more shares than borrowed will revert for underflow.
    /// @dev It is advised to use the `shares` input when repaying the full position to avoid reverts due to conversion
    /// roundings between shares and assets.
    /// @dev An attacker can front-run a repay with a small repay making the transaction revert for underflow.
    /// @param marketParams The market to repay assets to.
    /// @param assets The amount of assets to repay.
    /// @param shares The amount of shares to burn.
    /// @param onBehalf The address of the owner of the debt position.
    /// @param data Arbitrary data to pass to the `onMorphoRepay` callback. Pass empty data if not needed.
    /// @return assetsRepaid The amount of assets repaid.
    /// @return sharesRepaid The amount of shares burned.
    function repay(
        MarketParams memory marketParams,
        uint256 assets,
        uint256 shares,
        address onBehalf,
        bytes memory data
    ) external returns (uint256 assetsRepaid, uint256 sharesRepaid);

    /// @notice Supplies `assets` of collateral on behalf of `onBehalf`, optionally calling back the caller's
    /// `onMorphoSupplyCollateral` function with the given `data`.
    /// @dev Interest are not accrued since it's not required and it saves gas.
    /// @dev Supplying a large amount can revert for overflow.
    /// @param marketParams The market to supply collateral to.
    /// @param assets The amount of collateral to supply.
    /// @param onBehalf The address that will own the increased collateral position.
    /// @param data Arbitrary data to pass to the `onMorphoSupplyCollateral` callback. Pass empty data if not needed.
    function supplyCollateral(MarketParams memory marketParams, uint256 assets, address onBehalf, bytes memory data)
        external;

    /// @notice Withdraws `assets` of collateral on behalf of `onBehalf` and sends the assets to `receiver`.
    /// @dev `msg.sender` must be authorized to manage `onBehalf`'s positions.
    /// @dev Withdrawing an amount corresponding to more collateral than supplied will revert for underflow.
    /// @param marketParams The market to withdraw collateral from.
    /// @param assets The amount of collateral to withdraw.
    /// @param onBehalf The address of the owner of the collateral position.
    /// @param receiver The address that will receive the collateral assets.
    function withdrawCollateral(MarketParams memory marketParams, uint256 assets, address onBehalf, address receiver)
        external;

    /// @notice Liquidates the given `repaidShares` of debt asset or seize the given `seizedAssets` of collateral on the
    /// given market `marketParams` of the given `borrower`'s position, optionally calling back the caller's
    /// `onMorphoLiquidate` function with the given `data`.
    /// @dev Either `seizedAssets` or `repaidShares` should be zero.
    /// @dev Seizing more than the collateral balance will underflow and revert without any error message.
    /// @dev Repaying more than the borrow balance will underflow and revert without any error message.
    /// @dev An attacker can front-run a liquidation with a small repay making the transaction revert for underflow.
    /// @param marketParams The market of the position.
    /// @param borrower The owner of the position.
    /// @param seizedAssets The amount of collateral to seize.
    /// @param repaidShares The amount of shares to repay.
    /// @param data Arbitrary data to pass to the `onMorphoLiquidate` callback. Pass empty data if not needed.
    /// @return The amount of assets seized.
    /// @return The amount of assets repaid.
    function liquidate(
        MarketParams memory marketParams,
        address borrower,
        uint256 seizedAssets,
        uint256 repaidShares,
        bytes memory data
    ) external returns (uint256, uint256);

    /// @notice Executes a flash loan.
    /// @dev Flash loans have access to the whole balance of the contract (the liquidity and deposited collateral of all
    /// markets combined, plus donations).
    /// @dev Warning: Not ERC-3156 compliant but compatibility is easily reached:
    /// - `flashFee` is zero.
    /// - `maxFlashLoan` is the token's balance of this contract.
    /// - The receiver of `assets` is the caller.
    /// @param token The token to flash loan.
    /// @param assets The amount of assets to flash loan.
    /// @param data Arbitrary data to pass to the `onMorphoFlashLoan` callback.
    function flashLoan(address token, uint256 assets, bytes calldata data) external;

    /// @notice Sets the authorization for `authorized` to manage `msg.sender`'s positions.
    /// @param authorized The authorized address.
    /// @param newIsAuthorized The new authorization status.
    function setAuthorization(address authorized, bool newIsAuthorized) external;

    /// @notice Sets the authorization for `authorization.authorized` to manage `authorization.authorizer`'s positions.
    /// @dev Warning: Reverts if the signature has already been submitted.
    /// @dev The signature is malleable, but it has no impact on the security here.
    /// @dev The nonce is passed as argument to be able to revert with a different error message.
    /// @param authorization The `Authorization` struct.
    /// @param signature The signature.
    function setAuthorizationWithSig(Authorization calldata authorization, Signature calldata signature) external;

    /// @notice Accrues interest for the given market `marketParams`.
    function accrueInterest(MarketParams memory marketParams) external;

    /// @notice Returns the data stored on the different `slots`.
    function extSloads(bytes32[] memory slots) external view returns (bytes32[] memory);
}

/// @dev This interface is inherited by Morpho so that function signatures are checked by the compiler.
/// @dev Consider using the IMorpho interface instead of this one.
interface IMorphoStaticTyping is IMorphoBase {
    /// @notice The state of the position of `user` on the market corresponding to `id`.
    /// @dev Warning: For `feeRecipient`, `supplyShares` does not contain the accrued shares since the last interest
    /// accrual.
    function position(Id id, address user)
        external
        view
        returns (uint256 supplyShares, uint128 borrowShares, uint128 collateral);

    /// @notice The state of the market corresponding to `id`.
    /// @dev Warning: `totalSupplyAssets` does not contain the accrued interest since the last interest accrual.
    /// @dev Warning: `totalBorrowAssets` does not contain the accrued interest since the last interest accrual.
    /// @dev Warning: `totalSupplyShares` does not contain the accrued shares by `feeRecipient` since the last interest
    /// accrual.
    function market(Id id)
        external
        view
        returns (
            uint128 totalSupplyAssets,
            uint128 totalSupplyShares,
            uint128 totalBorrowAssets,
            uint128 totalBorrowShares,
            uint128 lastUpdate,
            uint128 fee
        );

    /// @notice The market params corresponding to `id`.
    /// @dev This mapping is not used in Morpho. It is there to enable reducing the cost associated to calldata on layer
    /// 2s by creating a wrapper contract with functions that take `id` as input instead of `marketParams`.
    function idToMarketParams(Id id)
        external
        view
        returns (address loanToken, address collateralToken, address oracle, address irm, uint256 lltv);
}

/// @title IMorpho
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @dev Use this interface for Morpho to have access to all the functions with the appropriate function signatures.
interface IMorpho is IMorphoBase {
    /// @notice The state of the position of `user` on the market corresponding to `id`.
    /// @dev Warning: For `feeRecipient`, `p.supplyShares` does not contain the accrued shares since the last interest
    /// accrual.
    function position(Id id, address user) external view returns (Position memory p);

    /// @notice The state of the market corresponding to `id`.
    /// @dev Warning: `m.totalSupplyAssets` does not contain the accrued interest since the last interest accrual.
    /// @dev Warning: `m.totalBorrowAssets` does not contain the accrued interest since the last interest accrual.
    /// @dev Warning: `m.totalSupplyShares` does not contain the accrued shares by `feeRecipient` since the last
    /// interest accrual.
    function market(Id id) external view returns (Market memory m);

    /// @notice The market params corresponding to `id`.
    /// @dev This mapping is not used in Morpho. It is there to enable reducing the cost associated to calldata on layer
    /// 2s by creating a wrapper contract with functions that take `id` as input instead of `marketParams`.
    function idToMarketParams(Id id) external view returns (MarketParams memory);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {Id, MarketParams} from "../interfaces/IMorpho.sol";

/// @title MarketParamsLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Library to convert a market to its id.
library MarketParamsLib {
    /// @notice The length of the data used to compute the id of a market.
    /// @dev The length is 5 * 32 because `MarketParams` has 5 variables of 32 bytes each.
    uint256 internal constant MARKET_PARAMS_BYTES_LENGTH = 5 * 32;

    /// @notice Returns the id of the market `marketParams`.
    function id(MarketParams memory marketParams) internal pure returns (Id marketParamsId) {
        assembly ("memory-safe") {
            marketParamsId := keccak256(marketParams, MARKET_PARAMS_BYTES_LENGTH)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

uint256 constant WAD = 1e18;

/// @title MathLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Library to manage fixed-point arithmetic.
library MathLib {
    /// @dev Returns (`x` * `y`) / `WAD` rounded down.
    function wMulDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, y, WAD);
    }

    /// @dev Returns (`x` * `WAD`) / `y` rounded down.
    function wDivDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, WAD, y);
    }

    /// @dev Returns (`x` * `WAD`) / `y` rounded up.
    function wDivUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, WAD, y);
    }

    /// @dev Returns (`x` * `y`) / `d` rounded down.
    function mulDivDown(uint256 x, uint256 y, uint256 d) internal pure returns (uint256) {
        return (x * y) / d;
    }

    /// @dev Returns (`x` * `y`) / `d` rounded up.
    function mulDivUp(uint256 x, uint256 y, uint256 d) internal pure returns (uint256) {
        return (x * y + (d - 1)) / d;
    }

    /// @dev Returns the sum of the first three non-zero terms of a Taylor expansion of e^(nx) - 1, to approximate a
    /// continuous compound interest rate.
    function wTaylorCompounded(uint256 x, uint256 n) internal pure returns (uint256) {
        uint256 firstTerm = x * n;
        uint256 secondTerm = mulDivDown(firstTerm, firstTerm, 2 * WAD);
        uint256 thirdTerm = mulDivDown(secondTerm, firstTerm, 3 * WAD);

        return firstTerm + secondTerm + thirdTerm;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.20;

import {Strings} from "../Strings.sol";

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity 0.8.21;

import {
    MarketConfig,
    PendingUint192,
    PendingAddress,
    MarketAllocation,
    IMetaMorphoBase,
    IMetaMorphoStaticTyping
} from "./interfaces/IMetaMorpho.sol";
import {Id, MarketParams, Market, IMorpho} from "../lib/morpho-blue/src/interfaces/IMorpho.sol";

import {PendingUint192, PendingAddress, PendingLib} from "./libraries/PendingLib.sol";
import {ConstantsLib} from "./libraries/ConstantsLib.sol";
import {ErrorsLib} from "./libraries/ErrorsLib.sol";
import {EventsLib} from "./libraries/EventsLib.sol";
import {WAD} from "../lib/morpho-blue/src/libraries/MathLib.sol";
import {UtilsLib} from "../lib/morpho-blue/src/libraries/UtilsLib.sol";
import {SafeCast} from "../lib/openzeppelin-contracts/contracts/utils/math/SafeCast.sol";
import {SharesMathLib} from "../lib/morpho-blue/src/libraries/SharesMathLib.sol";
import {MorphoLib} from "../lib/morpho-blue/src/libraries/periphery/MorphoLib.sol";
import {MarketParamsLib} from "../lib/morpho-blue/src/libraries/MarketParamsLib.sol";
import {IERC20Metadata} from "../lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {MorphoBalancesLib} from "../lib/morpho-blue/src/libraries/periphery/MorphoBalancesLib.sol";

import {Multicall} from "../lib/openzeppelin-contracts/contracts/utils/Multicall.sol";
import {Ownable2Step, Ownable} from "../lib/openzeppelin-contracts/contracts/access/Ownable2Step.sol";
import {ERC20Permit} from "../lib/openzeppelin-contracts/contracts/token/ERC20/extensions/ERC20Permit.sol";
import {
    IERC20,
    IERC4626,
    ERC20,
    ERC4626,
    Math,
    SafeERC20
} from "../lib/openzeppelin-contracts/contracts/token/ERC20/extensions/ERC4626.sol";

/// @title MetaMorpho
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice ERC4626 compliant vault allowing users to deposit assets to Morpho.
contract MetaMorpho is ERC4626, ERC20Permit, Ownable2Step, Multicall, IMetaMorphoStaticTyping {
    using Math for uint256;
    using UtilsLib for uint256;
    using SafeCast for uint256;
    using SafeERC20 for IERC20;
    using MorphoLib for IMorpho;
    using SharesMathLib for uint256;
    using MorphoBalancesLib for IMorpho;
    using MarketParamsLib for MarketParams;
    using PendingLib for MarketConfig;
    using PendingLib for PendingUint192;
    using PendingLib for PendingAddress;

    /* IMMUTABLES */

    /// @inheritdoc IMetaMorphoBase
    IMorpho public immutable MORPHO;

    /// @notice OpenZeppelin decimals offset used by the ERC4626 implementation.
    /// @dev Calculated to be max(0, 18 - underlyingDecimals) at construction, so the initial conversion rate maximizes
    /// precision between shares and assets.
    uint8 public immutable DECIMALS_OFFSET;

    /* STORAGE */

    /// @inheritdoc IMetaMorphoBase
    address public curator;

    /// @inheritdoc IMetaMorphoBase
    mapping(address => bool) public isAllocator;

    /// @inheritdoc IMetaMorphoBase
    address public guardian;

    /// @inheritdoc IMetaMorphoStaticTyping
    mapping(Id => MarketConfig) public config;

    /// @inheritdoc IMetaMorphoBase
    uint256 public timelock;

    /// @inheritdoc IMetaMorphoStaticTyping
    PendingAddress public pendingGuardian;

    /// @inheritdoc IMetaMorphoStaticTyping
    mapping(Id => PendingUint192) public pendingCap;

    /// @inheritdoc IMetaMorphoStaticTyping
    PendingUint192 public pendingTimelock;

    /// @inheritdoc IMetaMorphoBase
    uint96 public fee;

    /// @inheritdoc IMetaMorphoBase
    address public feeRecipient;

    /// @inheritdoc IMetaMorphoBase
    address public skimRecipient;

    /// @inheritdoc IMetaMorphoBase
    Id[] public supplyQueue;

    /// @inheritdoc IMetaMorphoBase
    Id[] public withdrawQueue;

    /// @inheritdoc IMetaMorphoBase
    uint256 public lastTotalAssets;

    /* CONSTRUCTOR */

    /// @dev Initializes the contract.
    /// @param owner The owner of the contract.
    /// @param morpho The address of the Morpho contract.
    /// @param initialTimelock The initial timelock.
    /// @param _asset The address of the underlying asset.
    /// @param _name The name of the vault.
    /// @param _symbol The symbol of the vault.
    constructor(
        address owner,
        address morpho,
        uint256 initialTimelock,
        address _asset,
        string memory _name,
        string memory _symbol
    ) ERC4626(IERC20(_asset)) ERC20Permit(_name) ERC20(_name, _symbol) Ownable(owner) {
        if (morpho == address(0)) revert ErrorsLib.ZeroAddress();

        MORPHO = IMorpho(morpho);
        DECIMALS_OFFSET = uint8(uint256(18).zeroFloorSub(IERC20Metadata(_asset).decimals()));

        _checkTimelockBounds(initialTimelock);
        _setTimelock(initialTimelock);

        IERC20(_asset).forceApprove(morpho, type(uint256).max);
    }

    /* MODIFIERS */

    /// @dev Reverts if the caller doesn't have the curator role.
    modifier onlyCuratorRole() {
        address sender = _msgSender();
        if (sender != curator && sender != owner()) revert ErrorsLib.NotCuratorRole();

        _;
    }

    /// @dev Reverts if the caller doesn't have the allocator role.
    modifier onlyAllocatorRole() {
        address sender = _msgSender();
        if (!isAllocator[sender] && sender != curator && sender != owner()) {
            revert ErrorsLib.NotAllocatorRole();
        }

        _;
    }

    /// @dev Reverts if the caller doesn't have the guardian role.
    modifier onlyGuardianRole() {
        if (_msgSender() != owner() && _msgSender() != guardian) revert ErrorsLib.NotGuardianRole();

        _;
    }

    /// @dev Reverts if the caller doesn't have the curator nor the guardian role.
    modifier onlyCuratorOrGuardianRole() {
        if (_msgSender() != guardian && _msgSender() != curator && _msgSender() != owner()) {
            revert ErrorsLib.NotCuratorNorGuardianRole();
        }

        _;
    }

    /// @dev Makes sure conditions are met to accept a pending value.
    /// @dev Reverts if:
    /// - there's no pending value;
    /// - the timelock has not elapsed since the pending value has been submitted.
    modifier afterTimelock(uint256 validAt) {
        if (validAt == 0) revert ErrorsLib.NoPendingValue();
        if (block.timestamp < validAt) revert ErrorsLib.TimelockNotElapsed();

        _;
    }

    /* ONLY OWNER FUNCTIONS */

    /// @inheritdoc IMetaMorphoBase
    function setCurator(address newCurator) external onlyOwner {
        if (newCurator == curator) revert ErrorsLib.AlreadySet();

        curator = newCurator;

        emit EventsLib.SetCurator(newCurator);
    }

    /// @inheritdoc IMetaMorphoBase
    function setIsAllocator(address newAllocator, bool newIsAllocator) external onlyOwner {
        if (isAllocator[newAllocator] == newIsAllocator) revert ErrorsLib.AlreadySet();

        isAllocator[newAllocator] = newIsAllocator;

        emit EventsLib.SetIsAllocator(newAllocator, newIsAllocator);
    }

    /// @inheritdoc IMetaMorphoBase
    function setSkimRecipient(address newSkimRecipient) external onlyOwner {
        if (newSkimRecipient == skimRecipient) revert ErrorsLib.AlreadySet();

        skimRecipient = newSkimRecipient;

        emit EventsLib.SetSkimRecipient(newSkimRecipient);
    }

    /// @inheritdoc IMetaMorphoBase
    function submitTimelock(uint256 newTimelock) external onlyOwner {
        if (newTimelock == timelock) revert ErrorsLib.AlreadySet();
        if (pendingTimelock.validAt != 0) revert ErrorsLib.AlreadyPending();
        _checkTimelockBounds(newTimelock);

        if (newTimelock > timelock) {
            _setTimelock(newTimelock);
        } else {
            // Safe "unchecked" cast because newTimelock <= MAX_TIMELOCK.
            pendingTimelock.update(uint184(newTimelock), timelock);

            emit EventsLib.SubmitTimelock(newTimelock);
        }
    }

    /// @inheritdoc IMetaMorphoBase
    function setFee(uint256 newFee) external onlyOwner {
        if (newFee == fee) revert ErrorsLib.AlreadySet();
        if (newFee > ConstantsLib.MAX_FEE) revert ErrorsLib.MaxFeeExceeded();
        if (newFee != 0 && feeRecipient == address(0)) revert ErrorsLib.ZeroFeeRecipient();

        // Accrue fee using the previous fee set before changing it.
        _updateLastTotalAssets(_accrueFee());

        // Safe "unchecked" cast because newFee <= MAX_FEE.
        fee = uint96(newFee);

        emit EventsLib.SetFee(_msgSender(), fee);
    }

    /// @inheritdoc IMetaMorphoBase
    function setFeeRecipient(address newFeeRecipient) external onlyOwner {
        if (newFeeRecipient == feeRecipient) revert ErrorsLib.AlreadySet();
        if (newFeeRecipient == address(0) && fee != 0) revert ErrorsLib.ZeroFeeRecipient();

        // Accrue fee to the previous fee recipient set before changing it.
        _updateLastTotalAssets(_accrueFee());

        feeRecipient = newFeeRecipient;

        emit EventsLib.SetFeeRecipient(newFeeRecipient);
    }

    /// @inheritdoc IMetaMorphoBase
    function submitGuardian(address newGuardian) external onlyOwner {
        if (newGuardian == guardian) revert ErrorsLib.AlreadySet();
        if (pendingGuardian.validAt != 0) revert ErrorsLib.AlreadyPending();

        if (guardian == address(0)) {
            _setGuardian(newGuardian);
        } else {
            pendingGuardian.update(newGuardian, timelock);

            emit EventsLib.SubmitGuardian(newGuardian);
        }
    }

    /* ONLY CURATOR FUNCTIONS */

    /// @inheritdoc IMetaMorphoBase
    function submitCap(MarketParams memory marketParams, uint256 newSupplyCap) external onlyCuratorRole {
        Id id = marketParams.id();
        if (marketParams.loanToken != asset()) revert ErrorsLib.InconsistentAsset(id);
        if (MORPHO.lastUpdate(id) == 0) revert ErrorsLib.MarketNotCreated();
        if (pendingCap[id].validAt != 0) revert ErrorsLib.AlreadyPending();
        if (config[id].removableAt != 0) revert ErrorsLib.PendingRemoval();
        uint256 supplyCap = config[id].cap;
        if (newSupplyCap == supplyCap) revert ErrorsLib.AlreadySet();

        if (newSupplyCap < supplyCap) {
            _setCap(marketParams, id, newSupplyCap.toUint184());
        } else {
            pendingCap[id].update(newSupplyCap.toUint184(), timelock);

            emit EventsLib.SubmitCap(_msgSender(), id, newSupplyCap);
        }
    }

    /// @inheritdoc IMetaMorphoBase
    function submitMarketRemoval(MarketParams memory marketParams) external onlyCuratorRole {
        Id id = marketParams.id();
        if (config[id].removableAt != 0) revert ErrorsLib.AlreadyPending();
        if (config[id].cap != 0) revert ErrorsLib.NonZeroCap();
        if (!config[id].enabled) revert ErrorsLib.MarketNotEnabled(id);
        if (pendingCap[id].validAt != 0) revert ErrorsLib.PendingCap(id);

        // Safe "unchecked" cast because timelock <= MAX_TIMELOCK.
        config[id].removableAt = uint64(block.timestamp + timelock);

        emit EventsLib.SubmitMarketRemoval(_msgSender(), id);
    }

    /* ONLY ALLOCATOR FUNCTIONS */

    /// @inheritdoc IMetaMorphoBase
    function setSupplyQueue(Id[] calldata newSupplyQueue) external onlyAllocatorRole {
        uint256 length = newSupplyQueue.length;

        if (length > ConstantsLib.MAX_QUEUE_LENGTH) revert ErrorsLib.MaxQueueLengthExceeded();

        for (uint256 i; i < length; ++i) {
            if (config[newSupplyQueue[i]].cap == 0) revert ErrorsLib.UnauthorizedMarket(newSupplyQueue[i]);
        }

        supplyQueue = newSupplyQueue;

        emit EventsLib.SetSupplyQueue(_msgSender(), newSupplyQueue);
    }

    /// @inheritdoc IMetaMorphoBase
    function updateWithdrawQueue(uint256[] calldata indexes) external onlyAllocatorRole {
        uint256 newLength = indexes.length;
        uint256 currLength = withdrawQueue.length;

        bool[] memory seen = new bool[](currLength);
        Id[] memory newWithdrawQueue = new Id[](newLength);

        for (uint256 i; i < newLength; ++i) {
            uint256 prevIndex = indexes[i];

            // If prevIndex >= currLength, it will revert with native "Index out of bounds".
            Id id = withdrawQueue[prevIndex];
            if (seen[prevIndex]) revert ErrorsLib.DuplicateMarket(id);
            seen[prevIndex] = true;

            newWithdrawQueue[i] = id;
        }

        for (uint256 i; i < currLength; ++i) {
            if (!seen[i]) {
                Id id = withdrawQueue[i];

                if (config[id].cap != 0) revert ErrorsLib.InvalidMarketRemovalNonZeroCap(id);
                if (pendingCap[id].validAt != 0) revert ErrorsLib.PendingCap(id);

                if (MORPHO.supplyShares(id, address(this)) != 0) {
                    if (config[id].removableAt == 0) revert ErrorsLib.InvalidMarketRemovalNonZeroSupply(id);

                    if (block.timestamp < config[id].removableAt) {
                        revert ErrorsLib.InvalidMarketRemovalTimelockNotElapsed(id);
                    }
                }

                delete config[id];
            }
        }

        withdrawQueue = newWithdrawQueue;

        emit EventsLib.SetWithdrawQueue(_msgSender(), newWithdrawQueue);
    }

    /// @inheritdoc IMetaMorphoBase
    function reallocate(MarketAllocation[] calldata allocations) external onlyAllocatorRole {
        uint256 totalSupplied;
        uint256 totalWithdrawn;
        for (uint256 i; i < allocations.length; ++i) {
            MarketAllocation memory allocation = allocations[i];
            Id id = allocation.marketParams.id();

            (uint256 supplyAssets, uint256 supplyShares,) = _accruedSupplyBalance(allocation.marketParams, id);
            uint256 withdrawn = supplyAssets.zeroFloorSub(allocation.assets);

            if (withdrawn > 0) {
                if (!config[id].enabled) revert ErrorsLib.MarketNotEnabled(id);

                // Guarantees that unknown frontrunning donations can be withdrawn, in order to disable a market.
                uint256 shares;
                if (allocation.assets == 0) {
                    shares = supplyShares;
                    withdrawn = 0;
                }

                (uint256 withdrawnAssets, uint256 withdrawnShares) =
                    MORPHO.withdraw(allocation.marketParams, withdrawn, shares, address(this), address(this));

                emit EventsLib.ReallocateWithdraw(_msgSender(), id, withdrawnAssets, withdrawnShares);

                totalWithdrawn += withdrawnAssets;
            } else {
                uint256 suppliedAssets = allocation.assets == type(uint256).max
                    ? totalWithdrawn.zeroFloorSub(totalSupplied)
                    : allocation.assets.zeroFloorSub(supplyAssets);

                if (suppliedAssets == 0) continue;

                uint256 supplyCap = config[id].cap;
                if (supplyCap == 0) revert ErrorsLib.UnauthorizedMarket(id);

                if (supplyAssets + suppliedAssets > supplyCap) revert ErrorsLib.SupplyCapExceeded(id);

                // The market's loan asset is guaranteed to be the vault's asset because it has a non-zero supply cap.
                (, uint256 suppliedShares) =
                    MORPHO.supply(allocation.marketParams, suppliedAssets, 0, address(this), hex"");

                emit EventsLib.ReallocateSupply(_msgSender(), id, suppliedAssets, suppliedShares);

                totalSupplied += suppliedAssets;
            }
        }

        if (totalWithdrawn != totalSupplied) revert ErrorsLib.InconsistentReallocation();
    }

    /* REVOKE FUNCTIONS */

    /// @inheritdoc IMetaMorphoBase
    function revokePendingTimelock() external onlyGuardianRole {
        delete pendingTimelock;

        emit EventsLib.RevokePendingTimelock(_msgSender());
    }

    /// @inheritdoc IMetaMorphoBase
    function revokePendingGuardian() external onlyGuardianRole {
        delete pendingGuardian;

        emit EventsLib.RevokePendingGuardian(_msgSender());
    }

    /// @inheritdoc IMetaMorphoBase
    function revokePendingCap(Id id) external onlyCuratorOrGuardianRole {
        delete pendingCap[id];

        emit EventsLib.RevokePendingCap(_msgSender(), id);
    }

    /// @inheritdoc IMetaMorphoBase
    function revokePendingMarketRemoval(Id id) external onlyCuratorOrGuardianRole {
        delete config[id].removableAt;

        emit EventsLib.RevokePendingMarketRemoval(_msgSender(), id);
    }

    /* EXTERNAL */

    /// @inheritdoc IMetaMorphoBase
    function supplyQueueLength() external view returns (uint256) {
        return supplyQueue.length;
    }

    /// @inheritdoc IMetaMorphoBase
    function withdrawQueueLength() external view returns (uint256) {
        return withdrawQueue.length;
    }

    /// @inheritdoc IMetaMorphoBase
    function acceptTimelock() external afterTimelock(pendingTimelock.validAt) {
        _setTimelock(pendingTimelock.value);
    }

    /// @inheritdoc IMetaMorphoBase
    function acceptGuardian() external afterTimelock(pendingGuardian.validAt) {
        _setGuardian(pendingGuardian.value);
    }

    /// @inheritdoc IMetaMorphoBase
    function acceptCap(MarketParams memory marketParams)
        external
        afterTimelock(pendingCap[marketParams.id()].validAt)
    {
        Id id = marketParams.id();

        // Safe "unchecked" cast because pendingCap <= type(uint184).max.
        _setCap(marketParams, id, uint184(pendingCap[id].value));
    }

    /// @inheritdoc IMetaMorphoBase
    function skim(address token) external {
        if (skimRecipient == address(0)) revert ErrorsLib.ZeroAddress();

        uint256 amount = IERC20(token).balanceOf(address(this));

        IERC20(token).safeTransfer(skimRecipient, amount);

        emit EventsLib.Skim(_msgSender(), token, amount);
    }

    /* ERC4626 (PUBLIC) */

    /// @inheritdoc IERC20Metadata
    function decimals() public view override(ERC20, ERC4626) returns (uint8) {
        return ERC4626.decimals();
    }

    /// @inheritdoc IERC4626
    /// @dev Warning: May be higher than the actual max deposit due to duplicate markets in the supplyQueue.
    function maxDeposit(address) public view override returns (uint256) {
        return _maxDeposit();
    }

    /// @inheritdoc IERC4626
    /// @dev Warning: May be higher than the actual max mint due to duplicate markets in the supplyQueue.
    function maxMint(address) public view override returns (uint256) {
        uint256 suppliable = _maxDeposit();

        return _convertToShares(suppliable, Math.Rounding.Floor);
    }

    /// @inheritdoc IERC4626
    /// @dev Warning: May be lower than the actual amount of assets that can be withdrawn by `owner` due to conversion
    /// roundings between shares and assets.
    function maxWithdraw(address owner) public view override returns (uint256 assets) {
        (assets,,) = _maxWithdraw(owner);
    }

    /// @inheritdoc IERC4626
    /// @dev Warning: May be lower than the actual amount of shares that can be redeemed by `owner` due to conversion
    /// roundings between shares and assets.
    function maxRedeem(address owner) public view override returns (uint256) {
        (uint256 assets, uint256 newTotalSupply, uint256 newTotalAssets) = _maxWithdraw(owner);

        return _convertToSharesWithTotals(assets, newTotalSupply, newTotalAssets, Math.Rounding.Floor);
    }

    /// @inheritdoc IERC4626
    function deposit(uint256 assets, address receiver) public override returns (uint256 shares) {
        uint256 newTotalAssets = _accrueFee();

        // Update `lastTotalAssets` to avoid an inconsistent state in a re-entrant context.
        // It is updated again in `_deposit`.
        lastTotalAssets = newTotalAssets;

        shares = _convertToSharesWithTotals(assets, totalSupply(), newTotalAssets, Math.Rounding.Floor);

        _deposit(_msgSender(), receiver, assets, shares);
    }

    /// @inheritdoc IERC4626
    function mint(uint256 shares, address receiver) public override returns (uint256 assets) {
        uint256 newTotalAssets = _accrueFee();

        // Update `lastTotalAssets` to avoid an inconsistent state in a re-entrant context.
        // It is updated again in `_deposit`.
        lastTotalAssets = newTotalAssets;

        assets = _convertToAssetsWithTotals(shares, totalSupply(), newTotalAssets, Math.Rounding.Ceil);

        _deposit(_msgSender(), receiver, assets, shares);
    }

    /// @inheritdoc IERC4626
    function withdraw(uint256 assets, address receiver, address owner) public override returns (uint256 shares) {
        uint256 newTotalAssets = _accrueFee();

        // Do not call expensive `maxWithdraw` and optimistically withdraw assets.

        shares = _convertToSharesWithTotals(assets, totalSupply(), newTotalAssets, Math.Rounding.Ceil);

        // `newTotalAssets - assets` may be a little off from `totalAssets()`.
        _updateLastTotalAssets(newTotalAssets.zeroFloorSub(assets));

        _withdraw(_msgSender(), receiver, owner, assets, shares);
    }

    /// @inheritdoc IERC4626
    function redeem(uint256 shares, address receiver, address owner) public override returns (uint256 assets) {
        uint256 newTotalAssets = _accrueFee();

        // Do not call expensive `maxRedeem` and optimistically redeem shares.

        assets = _convertToAssetsWithTotals(shares, totalSupply(), newTotalAssets, Math.Rounding.Floor);

        // `newTotalAssets - assets` may be a little off from `totalAssets()`.
        _updateLastTotalAssets(newTotalAssets.zeroFloorSub(assets));

        _withdraw(_msgSender(), receiver, owner, assets, shares);
    }

    /// @inheritdoc IERC4626
    function totalAssets() public view override returns (uint256 assets) {
        for (uint256 i; i < withdrawQueue.length; ++i) {
            assets += MORPHO.expectedSupplyAssets(_marketParams(withdrawQueue[i]), address(this));
        }
    }

    /* ERC4626 (INTERNAL) */

    /// @inheritdoc ERC4626
    function _decimalsOffset() internal view override returns (uint8) {
        return DECIMALS_OFFSET;
    }

    /// @dev Returns the maximum amount of asset (`assets`) that the `owner` can withdraw from the vault, as well as the
    /// new vault's total supply (`newTotalSupply`) and total assets (`newTotalAssets`).
    function _maxWithdraw(address owner)
        internal
        view
        returns (uint256 assets, uint256 newTotalSupply, uint256 newTotalAssets)
    {
        uint256 feeShares;
        (feeShares, newTotalAssets) = _accruedFeeShares();
        newTotalSupply = totalSupply() + feeShares;

        assets = _convertToAssetsWithTotals(balanceOf(owner), newTotalSupply, newTotalAssets, Math.Rounding.Floor);
        assets -= _simulateWithdrawMorpho(assets);
    }

    /// @dev Returns the maximum amount of assets that the vault can supply on Morpho.
    function _maxDeposit() internal view returns (uint256 totalSuppliable) {
        for (uint256 i; i < supplyQueue.length; ++i) {
            Id id = supplyQueue[i];

            uint256 supplyCap = config[id].cap;
            if (supplyCap == 0) continue;

            uint256 supplyShares = MORPHO.supplyShares(id, address(this));
            (uint256 totalSupplyAssets, uint256 totalSupplyShares,,) = MORPHO.expectedMarketBalances(_marketParams(id));
            // `supplyAssets` needs to be rounded up for `totalSuppliable` to be rounded down.
            uint256 supplyAssets = supplyShares.toAssetsUp(totalSupplyAssets, totalSupplyShares);

            totalSuppliable += supplyCap.zeroFloorSub(supplyAssets);
        }
    }

    /// @inheritdoc ERC4626
    /// @dev The accrual of performance fees is taken into account in the conversion.
    function _convertToShares(uint256 assets, Math.Rounding rounding) internal view override returns (uint256) {
        (uint256 feeShares, uint256 newTotalAssets) = _accruedFeeShares();

        return _convertToSharesWithTotals(assets, totalSupply() + feeShares, newTotalAssets, rounding);
    }

    /// @inheritdoc ERC4626
    /// @dev The accrual of performance fees is taken into account in the conversion.
    function _convertToAssets(uint256 shares, Math.Rounding rounding) internal view override returns (uint256) {
        (uint256 feeShares, uint256 newTotalAssets) = _accruedFeeShares();

        return _convertToAssetsWithTotals(shares, totalSupply() + feeShares, newTotalAssets, rounding);
    }

    /// @dev Returns the amount of shares that the vault would exchange for the amount of `assets` provided.
    /// @dev It assumes that the arguments `newTotalSupply` and `newTotalAssets` are up to date.
    function _convertToSharesWithTotals(
        uint256 assets,
        uint256 newTotalSupply,
        uint256 newTotalAssets,
        Math.Rounding rounding
    ) internal view returns (uint256) {
        return assets.mulDiv(newTotalSupply + 10 ** _decimalsOffset(), newTotalAssets + 1, rounding);
    }

    /// @dev Returns the amount of assets that the vault would exchange for the amount of `shares` provided.
    /// @dev It assumes that the arguments `newTotalSupply` and `newTotalAssets` are up to date.
    function _convertToAssetsWithTotals(
        uint256 shares,
        uint256 newTotalSupply,
        uint256 newTotalAssets,
        Math.Rounding rounding
    ) internal view returns (uint256) {
        return shares.mulDiv(newTotalAssets + 1, newTotalSupply + 10 ** _decimalsOffset(), rounding);
    }

    /// @inheritdoc ERC4626
    /// @dev Used in mint or deposit to deposit the underlying asset to Morpho markets.
    function _deposit(address caller, address receiver, uint256 assets, uint256 shares) internal override {
        super._deposit(caller, receiver, assets, shares);

        _supplyMorpho(assets);

        // `lastTotalAssets + assets` may be a little off from `totalAssets()`.
        _updateLastTotalAssets(lastTotalAssets + assets);
    }

    /// @inheritdoc ERC4626
    /// @dev Used in redeem or withdraw to withdraw the underlying asset from Morpho markets.
    /// @dev Depending on 3 cases, reverts when withdrawing "too much" with:
    /// 1. NotEnoughLiquidity when withdrawing more than available liquidity.
    /// 2. ERC20InsufficientAllowance when withdrawing more than `caller`'s allowance.
    /// 3. ERC20InsufficientBalance when withdrawing more than `owner`'s balance.
    function _withdraw(address caller, address receiver, address owner, uint256 assets, uint256 shares)
        internal
        override
    {
        _withdrawMorpho(assets);

        super._withdraw(caller, receiver, owner, assets, shares);
    }

    /* INTERNAL */

    /// @dev Returns the market params of the market defined by `id`.
    function _marketParams(Id id) internal view returns (MarketParams memory) {
        return MORPHO.idToMarketParams(id);
    }

    /// @dev Accrues interest on Morpho Blue and returns the vault's assets & corresponding shares supplied on the
    /// market defined by `marketParams`, as well as the market's state.
    /// @dev Assumes that the inputs `marketParams` and `id` match.
    function _accruedSupplyBalance(MarketParams memory marketParams, Id id)
        internal
        returns (uint256 assets, uint256 shares, Market memory market)
    {
        MORPHO.accrueInterest(marketParams);

        market = MORPHO.market(id);
        shares = MORPHO.supplyShares(id, address(this));
        assets = shares.toAssetsDown(market.totalSupplyAssets, market.totalSupplyShares);
    }

    /// @dev Reverts if `newTimelock` is not within the bounds.
    function _checkTimelockBounds(uint256 newTimelock) internal pure {
        if (newTimelock > ConstantsLib.MAX_TIMELOCK) revert ErrorsLib.AboveMaxTimelock();
        if (newTimelock < ConstantsLib.MIN_TIMELOCK) revert ErrorsLib.BelowMinTimelock();
    }

    /// @dev Sets `timelock` to `newTimelock`.
    function _setTimelock(uint256 newTimelock) internal {
        timelock = newTimelock;

        emit EventsLib.SetTimelock(_msgSender(), newTimelock);

        delete pendingTimelock;
    }

    /// @dev Sets `guardian` to `newGuardian`.
    function _setGuardian(address newGuardian) internal {
        guardian = newGuardian;

        emit EventsLib.SetGuardian(_msgSender(), newGuardian);

        delete pendingGuardian;
    }

    /// @dev Sets the cap of the market defined by `id` to `supplyCap`.
    /// @dev Assumes that the inputs `marketParams` and `id` match.
    function _setCap(MarketParams memory marketParams, Id id, uint184 supplyCap) internal {
        MarketConfig storage marketConfig = config[id];

        if (supplyCap > 0) {
            if (!marketConfig.enabled) {
                withdrawQueue.push(id);

                if (withdrawQueue.length > ConstantsLib.MAX_QUEUE_LENGTH) revert ErrorsLib.MaxQueueLengthExceeded();

                marketConfig.enabled = true;

                // Take into account assets of the new market without applying a fee.
                _updateLastTotalAssets(lastTotalAssets + MORPHO.expectedSupplyAssets(marketParams, address(this)));

                emit EventsLib.SetWithdrawQueue(msg.sender, withdrawQueue);
            }

            marketConfig.removableAt = 0;
        }

        marketConfig.cap = supplyCap;

        emit EventsLib.SetCap(_msgSender(), id, supplyCap);

        delete pendingCap[id];
    }

    /* LIQUIDITY ALLOCATION */

    /// @dev Supplies `assets` to Morpho.
    function _supplyMorpho(uint256 assets) internal {
        for (uint256 i; i < supplyQueue.length; ++i) {
            Id id = supplyQueue[i];

            uint256 supplyCap = config[id].cap;
            if (supplyCap == 0) continue;

            MarketParams memory marketParams = _marketParams(id);

            MORPHO.accrueInterest(marketParams);

            Market memory market = MORPHO.market(id);
            uint256 supplyShares = MORPHO.supplyShares(id, address(this));
            // `supplyAssets` needs to be rounded up for `toSupply` to be rounded down.
            uint256 supplyAssets = supplyShares.toAssetsUp(market.totalSupplyAssets, market.totalSupplyShares);

            uint256 toSupply = UtilsLib.min(supplyCap.zeroFloorSub(supplyAssets), assets);

            if (toSupply > 0) {
                // Using try/catch to skip markets that revert.
                try MORPHO.supply(marketParams, toSupply, 0, address(this), hex"") {
                    assets -= toSupply;
                } catch {}
            }

            if (assets == 0) return;
        }

        if (assets != 0) revert ErrorsLib.AllCapsReached();
    }

    /// @dev Withdraws `assets` from Morpho.
    function _withdrawMorpho(uint256 assets) internal {
        for (uint256 i; i < withdrawQueue.length; ++i) {
            Id id = withdrawQueue[i];
            MarketParams memory marketParams = _marketParams(id);
            (uint256 supplyAssets,, Market memory market) = _accruedSupplyBalance(marketParams, id);

            uint256 toWithdraw = UtilsLib.min(
                _withdrawable(marketParams, market.totalSupplyAssets, market.totalBorrowAssets, supplyAssets), assets
            );

            if (toWithdraw > 0) {
                // Using try/catch to skip markets that revert.
                try MORPHO.withdraw(marketParams, toWithdraw, 0, address(this), address(this)) {
                    assets -= toWithdraw;
                } catch {}
            }

            if (assets == 0) return;
        }

        if (assets != 0) revert ErrorsLib.NotEnoughLiquidity();
    }

    /// @dev Simulates a withdraw of `assets` from Morpho.
    /// @return The remaining assets to be withdrawn.
    function _simulateWithdrawMorpho(uint256 assets) internal view returns (uint256) {
        for (uint256 i; i < withdrawQueue.length; ++i) {
            Id id = withdrawQueue[i];
            MarketParams memory marketParams = _marketParams(id);

            uint256 supplyShares = MORPHO.supplyShares(id, address(this));
            (uint256 totalSupplyAssets, uint256 totalSupplyShares, uint256 totalBorrowAssets,) =
                MORPHO.expectedMarketBalances(marketParams);

            // The vault withdrawing from Morpho cannot fail because:
            // 1. oracle.price() is never called (the vault doesn't borrow)
            // 2. the amount is capped to the liquidity available on Morpho
            // 3. virtually accruing interest didn't fail
            assets = assets.zeroFloorSub(
                _withdrawable(
                    marketParams,
                    totalSupplyAssets,
                    totalBorrowAssets,
                    supplyShares.toAssetsDown(totalSupplyAssets, totalSupplyShares)
                )
            );

            if (assets == 0) break;
        }

        return assets;
    }

    /// @dev Returns the withdrawable amount of assets from the market defined by `marketParams`, given the market's
    /// total supply and borrow assets and the vault's assets supplied.
    function _withdrawable(
        MarketParams memory marketParams,
        uint256 totalSupplyAssets,
        uint256 totalBorrowAssets,
        uint256 supplyAssets
    ) internal view returns (uint256) {
        // Inside a flashloan callback, liquidity on Morpho Blue may be limited to the singleton's balance.
        uint256 availableLiquidity = UtilsLib.min(
            totalSupplyAssets - totalBorrowAssets, ERC20(marketParams.loanToken).balanceOf(address(MORPHO))
        );

        return UtilsLib.min(supplyAssets, availableLiquidity);
    }

    /* FEE MANAGEMENT */

    /// @dev Updates `lastTotalAssets` to `updatedTotalAssets`.
    function _updateLastTotalAssets(uint256 updatedTotalAssets) internal {
        lastTotalAssets = updatedTotalAssets;

        emit EventsLib.UpdateLastTotalAssets(updatedTotalAssets);
    }

    /// @dev Accrues the fee and mints the fee shares to the fee recipient.
    /// @return newTotalAssets The vaults total assets after accruing the interest.
    function _accrueFee() internal returns (uint256 newTotalAssets) {
        uint256 feeShares;
        (feeShares, newTotalAssets) = _accruedFeeShares();

        if (feeShares != 0) _mint(feeRecipient, feeShares);

        emit EventsLib.AccrueInterest(newTotalAssets, feeShares);
    }

    /// @dev Computes and returns the fee shares (`feeShares`) to mint and the new vault's total assets
    /// (`newTotalAssets`).
    function _accruedFeeShares() internal view returns (uint256 feeShares, uint256 newTotalAssets) {
        newTotalAssets = totalAssets();

        uint256 totalInterest = newTotalAssets.zeroFloorSub(lastTotalAssets);
        if (totalInterest != 0 && fee != 0) {
            // It is acknowledged that `feeAssets` may be rounded down to 0 if `totalInterest * fee < WAD`.
            uint256 feeAssets = totalInterest.mulDiv(fee, WAD);
            // The fee assets is subtracted from the total assets in this calculation to compensate for the fact
            // that total assets is already increased by the total interest (including the fee assets).
            feeShares =
                _convertToSharesWithTotals(feeAssets, totalSupply(), newTotalAssets - feeAssets, Math.Rounding.Floor);
        }
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {Id, MarketParams, Market, IMorpho} from "../../interfaces/IMorpho.sol";
import {IIrm} from "../../interfaces/IIrm.sol";

import {MathLib} from "../MathLib.sol";
import {UtilsLib} from "../UtilsLib.sol";
import {MorphoLib} from "./MorphoLib.sol";
import {SharesMathLib} from "../SharesMathLib.sol";
import {MarketParamsLib} from "../MarketParamsLib.sol";

/// @title MorphoBalancesLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Helper library exposing getters with the expected value after interest accrual.
/// @dev This library is not used in Morpho itself and is intended to be used by integrators.
/// @dev The getter to retrieve the expected total borrow shares is not exposed because interest accrual does not apply
/// to it. The value can be queried directly on Morpho using `totalBorrowShares`.
library MorphoBalancesLib {
    using MathLib for uint256;
    using MathLib for uint128;
    using UtilsLib for uint256;
    using MorphoLib for IMorpho;
    using SharesMathLib for uint256;
    using MarketParamsLib for MarketParams;

    /// @notice Returns the expected market balances of a market after having accrued interest.
    /// @return The expected total supply assets.
    /// @return The expected total supply shares.
    /// @return The expected total borrow assets.
    /// @return The expected total borrow shares.
    function expectedMarketBalances(IMorpho morpho, MarketParams memory marketParams)
        internal
        view
        returns (uint256, uint256, uint256, uint256)
    {
        Id id = marketParams.id();
        Market memory market = morpho.market(id);

        uint256 elapsed = block.timestamp - market.lastUpdate;

        // Skipped if elapsed == 0 or totalBorrowAssets == 0 because interest would be null, or if irm == address(0).
        if (elapsed != 0 && market.totalBorrowAssets != 0 && marketParams.irm != address(0)) {
            uint256 borrowRate = IIrm(marketParams.irm).borrowRateView(marketParams, market);
            uint256 interest = market.totalBorrowAssets.wMulDown(borrowRate.wTaylorCompounded(elapsed));
            market.totalBorrowAssets += interest.toUint128();
            market.totalSupplyAssets += interest.toUint128();

            if (market.fee != 0) {
                uint256 feeAmount = interest.wMulDown(market.fee);
                // The fee amount is subtracted from the total supply in this calculation to compensate for the fact
                // that total supply is already updated.
                uint256 feeShares =
                    feeAmount.toSharesDown(market.totalSupplyAssets - feeAmount, market.totalSupplyShares);
                market.totalSupplyShares += feeShares.toUint128();
            }
        }

        return (market.totalSupplyAssets, market.totalSupplyShares, market.totalBorrowAssets, market.totalBorrowShares);
    }

    /// @notice Returns the expected total supply assets of a market after having accrued interest.
    function expectedTotalSupplyAssets(IMorpho morpho, MarketParams memory marketParams)
        internal
        view
        returns (uint256 totalSupplyAssets)
    {
        (totalSupplyAssets,,,) = expectedMarketBalances(morpho, marketParams);
    }

    /// @notice Returns the expected total borrow assets of a market after having accrued interest.
    function expectedTotalBorrowAssets(IMorpho morpho, MarketParams memory marketParams)
        internal
        view
        returns (uint256 totalBorrowAssets)
    {
        (,, totalBorrowAssets,) = expectedMarketBalances(morpho, marketParams);
    }

    /// @notice Returns the expected total supply shares of a market after having accrued interest.
    function expectedTotalSupplyShares(IMorpho morpho, MarketParams memory marketParams)
        internal
        view
        returns (uint256 totalSupplyShares)
    {
        (, totalSupplyShares,,) = expectedMarketBalances(morpho, marketParams);
    }

    /// @notice Returns the expected supply assets balance of `user` on a market after having accrued interest.
    /// @dev Warning: Wrong for `feeRecipient` because their supply shares increase is not taken into account.
    /// @dev Warning: Withdrawing using the expected supply assets can lead to a revert due to conversion roundings from
    /// assets to shares.
    function expectedSupplyAssets(IMorpho morpho, MarketParams memory marketParams, address user)
        internal
        view
        returns (uint256)
    {
        Id id = marketParams.id();
        uint256 supplyShares = morpho.supplyShares(id, user);
        (uint256 totalSupplyAssets, uint256 totalSupplyShares,,) = expectedMarketBalances(morpho, marketParams);

        return supplyShares.toAssetsDown(totalSupplyAssets, totalSupplyShares);
    }

    /// @notice Returns the expected borrow assets balance of `user` on a market after having accrued interest.
    /// @dev Warning: The expected balance is rounded up, so it may be greater than the market's expected total borrow
    /// assets.
    function expectedBorrowAssets(IMorpho morpho, MarketParams memory marketParams, address user)
        internal
        view
        returns (uint256)
    {
        Id id = marketParams.id();
        uint256 borrowShares = morpho.borrowShares(id, user);
        (,, uint256 totalBorrowAssets, uint256 totalBorrowShares) = expectedMarketBalances(morpho, marketParams);

        return borrowShares.toAssetsUp(totalBorrowAssets, totalBorrowShares);
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {IMorpho, Id} from "../../interfaces/IMorpho.sol";
import {MorphoStorageLib} from "./MorphoStorageLib.sol";

/// @title MorphoLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Helper library to access Morpho storage variables.
/// @dev Warning: Supply and borrow getters may return outdated values that do not include accrued interest.
library MorphoLib {
    function supplyShares(IMorpho morpho, Id id, address user) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.positionSupplySharesSlot(id, user));
        return uint256(morpho.extSloads(slot)[0]);
    }

    function borrowShares(IMorpho morpho, Id id, address user) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.positionBorrowSharesAndCollateralSlot(id, user));
        return uint128(uint256(morpho.extSloads(slot)[0]));
    }

    function collateral(IMorpho morpho, Id id, address user) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.positionBorrowSharesAndCollateralSlot(id, user));
        return uint256(morpho.extSloads(slot)[0] >> 128);
    }

    function totalSupplyAssets(IMorpho morpho, Id id) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.marketTotalSupplyAssetsAndSharesSlot(id));
        return uint128(uint256(morpho.extSloads(slot)[0]));
    }

    function totalSupplyShares(IMorpho morpho, Id id) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.marketTotalSupplyAssetsAndSharesSlot(id));
        return uint256(morpho.extSloads(slot)[0] >> 128);
    }

    function totalBorrowAssets(IMorpho morpho, Id id) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.marketTotalBorrowAssetsAndSharesSlot(id));
        return uint128(uint256(morpho.extSloads(slot)[0]));
    }

    function totalBorrowShares(IMorpho morpho, Id id) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.marketTotalBorrowAssetsAndSharesSlot(id));
        return uint256(morpho.extSloads(slot)[0] >> 128);
    }

    function lastUpdate(IMorpho morpho, Id id) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.marketLastUpdateAndFeeSlot(id));
        return uint128(uint256(morpho.extSloads(slot)[0]));
    }

    function fee(IMorpho morpho, Id id) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.marketLastUpdateAndFeeSlot(id));
        return uint256(morpho.extSloads(slot)[0] >> 128);
    }

    function _array(bytes32 x) private pure returns (bytes32[] memory) {
        bytes32[] memory res = new bytes32[](1);
        res[0] = x;
        return res;
    }
}