// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "./IAdminControl.sol";

abstract contract AdminControl is Ownable, IAdminControl, ERC165 {
    using EnumerableSet for EnumerableSet.AddressSet;

    // Track registered admins
    EnumerableSet.AddressSet private _admins;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IAdminControl).interfaceId
            || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Only allows approved admins to call the specified function
     */
    modifier adminRequired() {
        require(owner() == msg.sender || _admins.contains(msg.sender), "AdminControl: Must be owner or admin");
        _;
    }   

    /**
     * @dev See {IAdminControl-getAdmins}.
     */
    function getAdmins() external view override returns (address[] memory admins) {
        admins = new address[](_admins.length());
        for (uint i = 0; i < _admins.length(); i++) {
            admins[i] = _admins.at(i);
        }
        return admins;
    }

    /**
     * @dev See {IAdminControl-approveAdmin}.
     */
    function approveAdmin(address admin) external override onlyOwner {
        if (!_admins.contains(admin)) {
            emit AdminApproved(admin, msg.sender);
            _admins.add(admin);
        }
    }

    /**
     * @dev See {IAdminControl-revokeAdmin}.
     */
    function revokeAdmin(address admin) external override onlyOwner {
        if (_admins.contains(admin)) {
            emit AdminRevoked(admin, msg.sender);
            _admins.remove(admin);
        }
    }

    /**
     * @dev See {IAdminControl-isAdmin}.
     */
    function isAdmin(address admin) public override view returns (bool) {
        return (owner() == admin || _admins.contains(admin));
    }

}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165Checker.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";

import "../extensions/ICreatorExtensionTokenURI.sol";

import "./ICreatorCore.sol";

/**
 * @dev Core creator implementation
 */
abstract contract CreatorCore is ReentrancyGuard, ICreatorCore, ERC165 {
    using Strings for uint256;
    using EnumerableSet for EnumerableSet.AddressSet;
    using AddressUpgradeable for address;

    uint256 _tokenCount = 0;

    // Track registered extensions data
    EnumerableSet.AddressSet internal _extensions;
    EnumerableSet.AddressSet internal _blacklistedExtensions;
    mapping (address => address) internal _extensionPermissions;
    mapping (address => bool) internal _extensionApproveTransfers;
    
    // For tracking which extension a token was minted by
    mapping (uint256 => address) internal _tokensExtension;

    // The baseURI for a given extension
    mapping (address => string) private _extensionBaseURI;
    mapping (address => bool) private _extensionBaseURIIdentical;

    // The prefix for any tokens with a uri configured
    mapping (address => string) private _extensionURIPrefix;

    // Mapping for individual token URIs
    mapping (uint256 => string) internal _tokenURIs;

    
    // Royalty configurations
    mapping (address => address payable[]) internal _extensionRoyaltyReceivers;
    mapping (address => uint256[]) internal _extensionRoyaltyBPS;
    mapping (uint256 => address payable[]) internal _tokenRoyaltyReceivers;
    mapping (uint256 => uint256[]) internal _tokenRoyaltyBPS;

    /**
     * External interface identifiers for royalties
     */

    /**
     *  @dev CreatorCore
     *
     *  bytes4(keccak256('getRoyalties(uint256)')) == 0xbb3bafd6
     *
     *  => 0xbb3bafd6 = 0xbb3bafd6
     */
    bytes4 private constant _INTERFACE_ID_ROYALTIES_CREATORCORE = 0xbb3bafd6;

    /**
     *  @dev Rarible: RoyaltiesV1
     *
     *  bytes4(keccak256('getFeeRecipients(uint256)')) == 0xb9c4d9fb
     *  bytes4(keccak256('getFeeBps(uint256)')) == 0x0ebd4c7f
     *
     *  => 0xb9c4d9fb ^ 0x0ebd4c7f = 0xb7799584
     */
    bytes4 private constant _INTERFACE_ID_ROYALTIES_RARIBLE = 0xb7799584;

    /**
     *  @dev Foundation
     *
     *  bytes4(keccak256('getFees(uint256)')) == 0xd5a06d4c
     *
     *  => 0xd5a06d4c = 0xd5a06d4c
     */
    bytes4 private constant _INTERFACE_ID_ROYALTIES_FOUNDATION = 0xd5a06d4c;

    /**
     *  @dev EIP-2981
     *
     * bytes4(keccak256("royaltyInfo(uint256,uint256)")) == 0x2a55205a
     *
     * => 0x2a55205a = 0x2a55205a
     */
    bytes4 private constant _INTERFACE_ID_ROYALTIES_EIP2981 = 0x2a55205a;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(ICreatorCore).interfaceId || super.supportsInterface(interfaceId)
            || interfaceId == _INTERFACE_ID_ROYALTIES_CREATORCORE || interfaceId == _INTERFACE_ID_ROYALTIES_RARIBLE
            || interfaceId == _INTERFACE_ID_ROYALTIES_FOUNDATION || interfaceId == _INTERFACE_ID_ROYALTIES_EIP2981;
    }

    /**
     * @dev Only allows registered extensions to call the specified function
     */
    modifier extensionRequired() {
        require(_extensions.contains(msg.sender), "Must be registered extension");
        _;
    }

    /**
     * @dev Only allows non-blacklisted extensions
     */
    modifier nonBlacklistRequired(address extension) {
        require(!_blacklistedExtensions.contains(extension), "Extension blacklisted");
        _;
    }   

    /**
     * @dev See {ICreatorCore-getExtensions}.
     */
    function getExtensions() external view override returns (address[] memory extensions) {
        extensions = new address[](_extensions.length());
        for (uint i = 0; i < _extensions.length(); i++) {
            extensions[i] = _extensions.at(i);
        }
        return extensions;
    }

    /**
     * @dev Register an extension
     */
    function _registerExtension(address extension, string calldata baseURI, bool baseURIIdentical) internal {
        require(extension != address(this), "Creator: Invalid");
        require(extension.isContract(), "Creator: Extension must be a contract");
        if (!_extensions.contains(extension)) {
            _extensionBaseURI[extension] = baseURI;
            _extensionBaseURIIdentical[extension] = baseURIIdentical;
            emit ExtensionRegistered(extension, msg.sender);
            _extensions.add(extension);
        }
    }

    /**
     * @dev Unregister an extension
     */
    function _unregisterExtension(address extension) internal {
       if (_extensions.contains(extension)) {
           emit ExtensionUnregistered(extension, msg.sender);
           _extensions.remove(extension);
       }
    }

    /**
     * @dev Blacklist an extension
     */
    function _blacklistExtension(address extension) internal {
       require(extension != address(this), "Cannot blacklist yourself");
       if (_extensions.contains(extension)) {
           emit ExtensionUnregistered(extension, msg.sender);
           _extensions.remove(extension);
       }
       if (!_blacklistedExtensions.contains(extension)) {
           emit ExtensionBlacklisted(extension, msg.sender);
           _blacklistedExtensions.add(extension);
       }
    }

    /**
     * @dev Set base token uri for an extension
     */
    function _setBaseTokenURIExtension(string calldata uri, bool identical) internal {
        _extensionBaseURI[msg.sender] = uri;
        _extensionBaseURIIdentical[msg.sender] = identical;
    }

    /**
     * @dev Set token uri prefix for an extension
     */
    function _setTokenURIPrefixExtension(string calldata prefix) internal {
        _extensionURIPrefix[msg.sender] = prefix;
    }

    /**
     * @dev Set token uri for a token of an extension
     */
    function _setTokenURIExtension(uint256 tokenId, string calldata uri) internal {
        require(_tokensExtension[tokenId] == msg.sender, "Invalid token");
        _tokenURIs[tokenId] = uri;
    }

    /**
     * @dev Set base token uri for tokens with no extension
     */
    function _setBaseTokenURI(string memory uri) internal {
        _extensionBaseURI[address(this)] = uri;
    }

    /**
     * @dev Set token uri prefix for tokens with no extension
     */
    function _setTokenURIPrefix(string calldata prefix) internal {
        _extensionURIPrefix[address(this)] = prefix;
    }


    /**
     * @dev Set token uri for a token with no extension
     */
    function _setTokenURI(uint256 tokenId, string calldata uri) internal {
        require(_tokensExtension[tokenId] == address(this), "Invalid token");
        _tokenURIs[tokenId] = uri;
    }

    /**
     * @dev Retrieve a token's URI
     */
    function _tokenURI(uint256 tokenId) internal view returns (string memory) {
        address extension = _tokensExtension[tokenId];
        require(!_blacklistedExtensions.contains(extension), "Extension blacklisted");

        if (bytes(_tokenURIs[tokenId]).length != 0) {
            if (bytes(_extensionURIPrefix[extension]).length != 0) {
                return string(abi.encodePacked(_extensionURIPrefix[extension],_tokenURIs[tokenId]));
            }
            return _tokenURIs[tokenId];
        }

        if (ERC165Checker.supportsInterface(extension, type(ICreatorExtensionTokenURI).interfaceId)) {
            return ICreatorExtensionTokenURI(extension).tokenURI(address(this), tokenId);
        }

        if (!_extensionBaseURIIdentical[extension]) {
            return string(abi.encodePacked(_extensionBaseURI[extension], tokenId.toString()));
        } else {
            return _extensionBaseURI[extension];
        }
    }

    /**
     * Get token extension
     */
    function _tokenExtension(uint256 tokenId) internal view returns (address extension) {
        extension = _tokensExtension[tokenId];

        require(extension != address(this), "No extension for token");
        require(!_blacklistedExtensions.contains(extension), "Extension blacklisted");

        return extension;
    }

    /**
     * Helper to get royalties for a token
     */
    function _getRoyalties(uint256 tokenId) view internal returns (address payable[] storage, uint256[] storage) {
        return (_getRoyaltyReceivers(tokenId), _getRoyaltyBPS(tokenId));
    }

    /**
     * Helper to get royalty receivers for a token
     */
    function _getRoyaltyReceivers(uint256 tokenId) view internal returns (address payable[] storage) {
        if (_tokenRoyaltyReceivers[tokenId].length > 0) {
            return _tokenRoyaltyReceivers[tokenId];
        } else if (_extensionRoyaltyReceivers[_tokensExtension[tokenId]].length > 0) {
            return _extensionRoyaltyReceivers[_tokensExtension[tokenId]];
        }
        return _extensionRoyaltyReceivers[address(this)];        
    }

    /**
     * Helper to get royalty basis points for a token
     */
    function _getRoyaltyBPS(uint256 tokenId) view internal returns (uint256[] storage) {
        if (_tokenRoyaltyBPS[tokenId].length > 0) {
            return _tokenRoyaltyBPS[tokenId];
        } else if (_extensionRoyaltyBPS[_tokensExtension[tokenId]].length > 0) {
            return _extensionRoyaltyBPS[_tokensExtension[tokenId]];
        }
        return _extensionRoyaltyBPS[address(this)];        
    }

    function _getRoyaltyInfo(uint256 tokenId, uint256 value) view internal returns (address receiver, uint256 amount){
        address payable[] storage receivers = _getRoyaltyReceivers(tokenId);
        require(receivers.length <= 1, "More than 1 royalty receiver");
        
        if (receivers.length == 0) {
            return (address(this), 0);
        }
        return (receivers[0], _getRoyaltyBPS(tokenId)[0]*value/10000);
    }

    /**
     * Set royalties for a token
     */
    function _setRoyalties(uint256 tokenId, address payable[] calldata receivers, uint256[] calldata basisPoints) internal {
        require(receivers.length == basisPoints.length, "Invalid input");
        uint256 totalBasisPoints;
        for (uint i = 0; i < basisPoints.length; i++) {
            totalBasisPoints += basisPoints[i];
        }
        require(totalBasisPoints < 10000, "Invalid total royalties");
        _tokenRoyaltyReceivers[tokenId] = receivers;
        _tokenRoyaltyBPS[tokenId] = basisPoints;
        emit RoyaltiesUpdated(tokenId, receivers, basisPoints);
    }

    /**
     * Set royalties for all tokens of an extension
     */
    function _setRoyaltiesExtension(address extension, address payable[] calldata receivers, uint256[] calldata basisPoints) internal {
        require(receivers.length == basisPoints.length, "Invalid input");
        uint256 totalBasisPoints;
        for (uint i = 0; i < basisPoints.length; i++) {
            totalBasisPoints += basisPoints[i];
        }
        require(totalBasisPoints < 10000, "Invalid total royalties");
        _extensionRoyaltyReceivers[extension] = receivers;
        _extensionRoyaltyBPS[extension] = basisPoints;
        if (extension == address(this)) {
            emit DefaultRoyaltiesUpdated(receivers, basisPoints);
        } else {
            emit ExtensionRoyaltiesUpdated(extension, receivers, basisPoints);
        }
    }


}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "@manifoldxyz/creator-core-solidity/contracts/core/IERC1155CreatorCore.sol";
import "@manifoldxyz/libraries-solidity/contracts/access/AdminControl.sol";
import "@manifoldxyz/creator-core-solidity/contracts/extensions/ICreatorExtensionTokenURI.sol";

import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";
import "@openzeppelin/contracts/interfaces/IERC165.sol";
import "@openzeppelin/contracts/utils/Strings.sol";

import "./IERC1155LazyPayableClaim.sol";

/**
 * @title Lazy Payable Claim
 * @author manifold.xyz
 * @notice Lazy claim with optional whitelist ERC1155 tokens
 */
contract ERC1155LazyPayableClaim is IERC165, IERC1155LazyPayableClaim, ICreatorExtensionTokenURI, ReentrancyGuard {
    using Strings for uint256;

    string private constant ARWEAVE_PREFIX = "https://arweave.net/";
    string private constant IPFS_PREFIX = "ipfs://";
    uint256 private constant MINT_INDEX_BITMASK = 0xFF;

    // stores the number of claim instances made by a given creator contract
    // used to determine the next claimIndex for a creator contract
    // { contractAddress => claimCount }
    mapping(address => uint224) private _claimCounts;

    // stores mapping from tokenId to the claim it represents
    // { contractAddress => { tokenId => Claim } }
    mapping(address => mapping(uint256 => Claim)) private _claims;

    // ONLY USED FOR NON-MERKLE MINTS: stores the number of tokens minted per wallet per claim, in order to limit maximum
    // { contractAddress => { claimIndex => { walletAddress => walletMints } } }
    mapping(address => mapping(uint256 => mapping(address => uint256))) private _mintsPerWallet;

    // ONLY USED FOR MERKLE MINTS: stores mapping from claim to indices minted
    // { contractAddress => { claimIndex => { claimIndexOffset => index } } }
    mapping(address => mapping(uint256 => mapping(uint256 => uint256))) private _claimMintIndices;

    // { contractAddress => { tokenId => { claimIndex } }
    mapping(address => mapping(uint256 => uint256)) private _claimTokenIds;

    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165) returns (bool) {
        return interfaceId == type(IERC1155LazyPayableClaim).interfaceId ||
            interfaceId == type(ICreatorExtensionTokenURI).interfaceId ||
            interfaceId == type(IERC165).interfaceId;
    }

    /**
     * @notice This extension is shared, not single-creator. So we must ensure
     * that a claim's initializer is an admin on the creator contract
     * @param creatorContractAddress    the address of the creator contract to check the admin against
     */
    modifier creatorAdminRequired(address creatorContractAddress) {
        AdminControl creatorCoreContract = AdminControl(creatorContractAddress);
        require(creatorCoreContract.isAdmin(msg.sender), "Wallet is not an administrator for contract");
        _;
    }

    /**
     * See {IERC1155LazyClaim-initializeClaim}.
     */
    function initializeClaim(
        address creatorContractAddress,
        ClaimParameters calldata claimParameters
    ) external override creatorAdminRequired(creatorContractAddress) returns (uint256) {
        // Sanity checks
        require(claimParameters.storageProtocol != StorageProtocol.INVALID, "Cannot initialize with invalid storage protocol");
        require(claimParameters.endDate == 0 || claimParameters.startDate < claimParameters.endDate, "Cannot have startDate greater than or equal to endDate");
        require(claimParameters.merkleRoot == "" || claimParameters.walletMax == 0, "Cannot provide both mintsPerWallet and merkleRoot");
    
        // Get the index for the new claim
        _claimCounts[creatorContractAddress]++;
        uint224 newIndex = _claimCounts[creatorContractAddress];

        // Mint one copy of token to self
        address[] memory minterAddress = new address[](1);
        minterAddress[0] = msg.sender;
        uint[] memory amount = new uint[](1);
        amount[0] = 1;
        string[] memory uris = new string[](1);
        uris[0] = "";

        // Mint new token on base contract, save which token that is for given claim.
        uint[] memory tokenIds = IERC1155CreatorCore(creatorContractAddress).mintExtensionNew(minterAddress, amount, uris);
        _claimTokenIds[creatorContractAddress][tokenIds[0]] = newIndex;

         // Create the claim
        _claims[creatorContractAddress][newIndex] = Claim({
            total: 0,
            totalMax: claimParameters.totalMax,
            walletMax: claimParameters.walletMax,
            startDate: claimParameters.startDate,
            endDate: claimParameters.endDate,
            storageProtocol: claimParameters.storageProtocol,
            merkleRoot: claimParameters.merkleRoot,
            location: claimParameters.location,
            tokenId: tokenIds[0],
            cost: claimParameters.cost,
            paymentReceiver: claimParameters.paymentReceiver
        });
        
        emit ClaimInitialized(creatorContractAddress, newIndex, msg.sender);
        return newIndex;
    }

    /**
     * See {IERC1155LazyClaim-updateClaim}.
     */
    function updateClaim(
        address creatorContractAddress,
        uint256 claimIndex,
        ClaimParameters calldata claimParameters
    ) external override creatorAdminRequired(creatorContractAddress) {
        // Sanity checks
        require(_claims[creatorContractAddress][claimIndex].storageProtocol != StorageProtocol.INVALID, "Claim not initialized");
        require(claimParameters.storageProtocol != StorageProtocol.INVALID, "Cannot set invalid storage protocol");
        require(_claims[creatorContractAddress][claimIndex].totalMax == 0 ||  _claims[creatorContractAddress][claimIndex].totalMax <= claimParameters.totalMax, "Cannot decrease totalMax");
        require(_claims[creatorContractAddress][claimIndex].walletMax == 0 || _claims[creatorContractAddress][claimIndex].walletMax <= claimParameters.walletMax, "Cannot decrease walletMax");
        require(claimParameters.endDate == 0 || claimParameters.startDate < claimParameters.endDate, "Cannot have startDate greater than or equal to endDate");

        // Overwrite the existing claim
        _claims[creatorContractAddress][claimIndex] = Claim({
            total: _claims[creatorContractAddress][claimIndex].total,
            totalMax: claimParameters.totalMax,
            walletMax: claimParameters.walletMax,
            startDate: claimParameters.startDate,
            endDate: claimParameters.endDate,
            storageProtocol: claimParameters.storageProtocol,
            merkleRoot: claimParameters.merkleRoot,
            location: claimParameters.location,
            tokenId: _claims[creatorContractAddress][claimIndex].tokenId,
            cost: claimParameters.cost,
            paymentReceiver: claimParameters.paymentReceiver
        });
    }

    /**
     * See {IERC1155LazyClaim-getClaimCount}.
     */
    function getClaimCount(address creatorContractAddress) external override view returns(uint256) {
        return _claimCounts[creatorContractAddress];
    }

    /**
     * See {IERC1155LazyClaim-getClaim}.
     */
    function getClaim(address creatorContractAddress, uint256 claimIndex) external override view returns(Claim memory) {
        require(_claims[creatorContractAddress][claimIndex].storageProtocol != StorageProtocol.INVALID, "Claim not initialized");
        return _claims[creatorContractAddress][claimIndex];
    }

    /**
     * See {IERC1155LazyClaim-checkMintIndex}.
     */
    function checkMintIndex(address creatorContractAddress, uint256 claimIndex, uint32 mintIndex) public override view returns(bool) {
        Claim storage claim = _claims[creatorContractAddress][claimIndex];
        require(claim.storageProtocol != StorageProtocol.INVALID, "Claim not initialized");
        require(claim.merkleRoot != "", "Can only check merkle claims");
        uint256 claimMintIndex = mintIndex >> 8;
        uint256 claimMintTracking = _claimMintIndices[creatorContractAddress][claimIndex][claimMintIndex];
        uint256 mintBitmask = 1 << (mintIndex & MINT_INDEX_BITMASK);
        return mintBitmask & claimMintTracking != 0;
    }

    /**
     * See {IERC1155LazyClaim-checkMintIndices}.
     */
    function checkMintIndices(address creatorContractAddress, uint256 claimIndex, uint32[] calldata mintIndices) external override view returns(bool[] memory minted) {
        minted = new bool[](mintIndices.length);
        for (uint i = 0; i < mintIndices.length; i++) {
            minted[i] = checkMintIndex(creatorContractAddress, claimIndex, mintIndices[i]);
        }
    }

    /**
     * See {IERC1155LazyClaim-getTotalMints}.
     */
    function getTotalMints(address minter, address creatorContractAddress, uint256 claimIndex) external override view returns(uint32) {
        Claim storage claim = _claims[creatorContractAddress][claimIndex];
        require(claim.storageProtocol != StorageProtocol.INVALID, "Claim not initialized");
        require(claim.walletMax != 0, "Can only retrieve for non-merkle claims with walletMax");
        return  uint32(_mintsPerWallet[creatorContractAddress][claimIndex][minter]);
    }

    /**
     * See {IERC1155LazyClaim-mint}.
     */
    function mint(address creatorContractAddress, uint256 claimIndex, uint32 mintIndex, bytes32[] calldata merkleProof) external payable override {
        Claim storage claim = _claims[creatorContractAddress][claimIndex];
        
        // Safely retrieve the claim
        require(claim.storageProtocol != StorageProtocol.INVALID, "Claim not initialized");

        // Check price
        require(msg.value == claim.cost, "Must pay more.");

        // Check timestamps
        require(claim.startDate == 0 || claim.startDate < block.timestamp, "Transaction before start date");
        require(claim.endDate == 0 || claim.endDate >= block.timestamp, "Transaction after end date");

        // Check totalMax
        require(claim.totalMax == 0 || claim.total < claim.totalMax, "Maximum tokens already minted for this claim");

        if (claim.merkleRoot != "") {
            // Merkle mint
            _checkMerkleAndUpdate(claim, creatorContractAddress, claimIndex, mintIndex, merkleProof);
        } else {
            // Non-merkle mint
            if (claim.walletMax != 0) {
                require(_mintsPerWallet[creatorContractAddress][claimIndex][msg.sender] < claim.walletMax, "Maximum tokens already minted for this wallet");
                unchecked{ _mintsPerWallet[creatorContractAddress][claimIndex][msg.sender]++; }
            }
        }
        unchecked{ claim.total++; }

        address[] memory minterAddress = new address[](1);
        minterAddress[0] = msg.sender;
        uint[] memory amount = new uint[](1);
        amount[0] = 1; // Default 1 for `mint` function.
        uint[] memory tokenIds = new uint[](1);
        tokenIds[0] = claim.tokenId;

        // Do mint
        IERC1155CreatorCore(creatorContractAddress).mintExtensionExisting(minterAddress, tokenIds, amount);
        payable(claim.paymentReceiver).transfer(msg.value);

        emit ClaimMint(creatorContractAddress, _claimTokenIds[creatorContractAddress][claimIndex]);
    }

    /**
     * See {IERC1155LazyClaim-mintBatch}.
     */
    function mintBatch(address creatorContractAddress, uint256 claimIndex, uint16 mintCount, uint32[] calldata mintIndices, bytes32[][] calldata merkleProofs) external payable override {
        Claim storage claim = _claims[creatorContractAddress][claimIndex];
        
        // Safely retrieve the claim
        require(claim.storageProtocol != StorageProtocol.INVALID, "Claim not initialized");

        // Check price
        require(msg.value == claim.cost * mintCount, "Must pay more.");

        // Check timestamps
        require(claim.startDate == 0 || claim.startDate < block.timestamp, "Transaction before start date");
        require(claim.endDate == 0 || claim.endDate >= block.timestamp, "Transaction after end date");

        // Check totalMax
        require(claim.totalMax == 0 || claim.total+mintCount <= claim.totalMax, "Too many requested for this claim");
        
        unchecked{ claim.total += mintCount; }

        if (claim.merkleRoot != "") {
            require(mintCount == mintIndices.length && mintCount == merkleProofs.length, "Invalid input");
            // Merkle mint
            for (uint i = 0; i < mintCount; ) {
                uint32 mintIndex = mintIndices[i];
                bytes32[] memory merkleProof = merkleProofs[i];
                
                _checkMerkleAndUpdate(claim, creatorContractAddress, claimIndex, mintIndex, merkleProof);
                unchecked { i++; }
            }
        } else {
            // Non-merkle mint
            if (claim.walletMax != 0) {
                require(_mintsPerWallet[creatorContractAddress][claimIndex][msg.sender]+mintCount <= claim.walletMax, "Too many requested for this wallet");
                unchecked{ _mintsPerWallet[creatorContractAddress][claimIndex][msg.sender] += mintCount; }
            }
            
        }
        address[] memory minterAddress = new address[](1);
        minterAddress[0] = msg.sender;
        uint[] memory amount = new uint[](1);
        amount[0] = mintCount;
        uint[] memory tokenIds = new uint[](1);
        tokenIds[0] = claim.tokenId;

        // Do mint
        IERC1155CreatorCore(creatorContractAddress).mintExtensionExisting(minterAddress, tokenIds, amount);
        payable(claim.paymentReceiver).transfer(msg.value);

        emit ClaimMintBatch(creatorContractAddress, claimIndex, mintCount);
    }

    /**
     * Helper to check merkle proof and whether or not the mintIndex was consumed. Also updates the consumed counts
     */
    function _checkMerkleAndUpdate(Claim storage claim, address creatorContractAddress, uint256 claimIndex, uint32 mintIndex, bytes32[] memory merkleProof) private {
        // Merkle mint
        bytes32 leaf = keccak256(abi.encodePacked(msg.sender, mintIndex));
        require(MerkleProof.verify(merkleProof, claim.merkleRoot, leaf), "Could not verify merkle proof");

        // Check if mintIndex has been minted
        uint256 claimMintIndex = mintIndex >> 8;
        uint256 claimMintTracking = _claimMintIndices[creatorContractAddress][claimIndex][claimMintIndex];
        uint256 mintBitmask = 1 << (mintIndex & MINT_INDEX_BITMASK);
        require(mintBitmask & claimMintTracking == 0, "Already minted");
        _claimMintIndices[creatorContractAddress][claimIndex][claimMintIndex] = claimMintTracking | mintBitmask;
    }

    /**
     * See {ICreatorExtensionTokenURI-tokenURI}.
     */
    function tokenURI(address creatorContractAddress, uint256 tokenId) external override view returns(string memory uri) {
        uint224 tokenClaim = uint224(_claimTokenIds[creatorContractAddress][tokenId]);
        require(tokenClaim > 0, "Token does not exist");
        Claim memory claim = _claims[creatorContractAddress][tokenClaim];

        string memory prefix = "";
        if (claim.storageProtocol == StorageProtocol.ARWEAVE) {
            prefix = ARWEAVE_PREFIX;
        } else if (claim.storageProtocol == StorageProtocol.IPFS) {
            prefix = IPFS_PREFIX;
        }
        uri = string(abi.encodePacked(prefix, claim.location));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165Checker.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Library used to query support of an interface declared via {IERC165}.
 *
 * Note that these functions return the actual result of the query: they do not
 * `revert` if an interface is not supported. It is up to the caller to decide
 * what to do in these cases.
 */
library ERC165Checker {
    // As per the EIP-165 spec, no interface should ever match 0xffffffff
    bytes4 private constant _INTERFACE_ID_INVALID = 0xffffffff;

    /**
     * @dev Returns true if `account` supports the {IERC165} interface,
     */
    function supportsERC165(address account) internal view returns (bool) {
        // Any contract that implements ERC165 must explicitly indicate support of
        // InterfaceId_ERC165 and explicitly indicate non-support of InterfaceId_Invalid
        return
            _supportsERC165Interface(account, type(IERC165).interfaceId) &&
            !_supportsERC165Interface(account, _INTERFACE_ID_INVALID);
    }

    /**
     * @dev Returns true if `account` supports the interface defined by
     * `interfaceId`. Support for {IERC165} itself is queried automatically.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsInterface(address account, bytes4 interfaceId) internal view returns (bool) {
        // query support of both ERC165 as per the spec and support of _interfaceId
        return supportsERC165(account) && _supportsERC165Interface(account, interfaceId);
    }

    /**
     * @dev Returns a boolean array where each value corresponds to the
     * interfaces passed in and whether they're supported or not. This allows
     * you to batch check interfaces for a contract where your expectation
     * is that some interfaces may not be supported.
     *
     * See {IERC165-supportsInterface}.
     *
     * _Available since v3.4._
     */
    function getSupportedInterfaces(address account, bytes4[] memory interfaceIds)
        internal
        view
        returns (bool[] memory)
    {
        // an array of booleans corresponding to interfaceIds and whether they're supported or not
        bool[] memory interfaceIdsSupported = new bool[](interfaceIds.length);

        // query support of ERC165 itself
        if (supportsERC165(account)) {
            // query support of each interface in interfaceIds
            for (uint256 i = 0; i < interfaceIds.length; i++) {
                interfaceIdsSupported[i] = _supportsERC165Interface(account, interfaceIds[i]);
            }
        }

        return interfaceIdsSupported;
    }

    /**
     * @dev Returns true if `account` supports all the interfaces defined in
     * `interfaceIds`. Support for {IERC165} itself is queried automatically.
     *
     * Batch-querying can lead to gas savings by skipping repeated checks for
     * {IERC165} support.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsAllInterfaces(address account, bytes4[] memory interfaceIds) internal view returns (bool) {
        // query support of ERC165 itself
        if (!supportsERC165(account)) {
            return false;
        }

        // query support of each interface in _interfaceIds
        for (uint256 i = 0; i < interfaceIds.length; i++) {
            if (!_supportsERC165Interface(account, interfaceIds[i])) {
                return false;
            }
        }

        // all interfaces supported
        return true;
    }

    /**
     * @notice Query if a contract implements an interface, does not check ERC165 support
     * @param account The address of the contract to query for support of an interface
     * @param interfaceId The interface identifier, as specified in ERC-165
     * @return true if the contract at account indicates support of the interface with
     * identifier interfaceId, false otherwise
     * @dev Assumes that account contains a contract that supports ERC165, otherwise
     * the behavior of this method is undefined. This precondition can be checked
     * with {supportsERC165}.
     * Interface identification is specified in ERC-165.
     */
    function _supportsERC165Interface(address account, bytes4 interfaceId) private view returns (bool) {
        bytes memory encodedParams = abi.encodeWithSelector(IERC165.supportsInterface.selector, interfaceId);
        (bool success, bytes memory result) = account.staticcall{gas: 30000}(encodedParams);
        if (result.length < 32) return false;
        return success && abi.decode(result, (bool));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/structs/EnumerableSet.sol)

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastvalue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastvalue;
                // Update the index for the moved value
                set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";

/**
 * @dev Interface for admin control
 */
interface IAdminControl is IERC165 {

    event AdminApproved(address indexed account, address indexed sender);
    event AdminRevoked(address indexed account, address indexed sender);

    /**
     * @dev gets address of all admins
     */
    function getAdmins() external view returns (address[] memory);

    /**
     * @dev add an admin.  Can only be called by contract owner.
     */
    function approveAdmin(address admin) external;

    /**
     * @dev remove an admin.  Can only be called by contract owner.
     */
    function revokeAdmin(address admin) external;

    /**
     * @dev checks whether or not given address is an admin
     * Returns True if they are
     */
    function isAdmin(address admin) external view returns (bool);

}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";

/**
 * @dev Core creator interface
 */
interface ICreatorCore is IERC165 {

    event ExtensionRegistered(address indexed extension, address indexed sender);
    event ExtensionUnregistered(address indexed extension, address indexed sender);
    event ExtensionBlacklisted(address indexed extension, address indexed sender);
    event MintPermissionsUpdated(address indexed extension, address indexed permissions, address indexed sender);
    event RoyaltiesUpdated(uint256 indexed tokenId, address payable[] receivers, uint256[] basisPoints);
    event DefaultRoyaltiesUpdated(address payable[] receivers, uint256[] basisPoints);
    event ExtensionRoyaltiesUpdated(address indexed extension, address payable[] receivers, uint256[] basisPoints);
    event ExtensionApproveTransferUpdated(address indexed extension, bool enabled);

    /**
     * @dev gets address of all extensions
     */
    function getExtensions() external view returns (address[] memory);

    /**
     * @dev add an extension.  Can only be called by contract owner or admin.
     * extension address must point to a contract implementing ICreatorExtension.
     * Returns True if newly added, False if already added.
     */
    function registerExtension(address extension, string calldata baseURI) external;

    /**
     * @dev add an extension.  Can only be called by contract owner or admin.
     * extension address must point to a contract implementing ICreatorExtension.
     * Returns True if newly added, False if already added.
     */
    function registerExtension(address extension, string calldata baseURI, bool baseURIIdentical) external;

    /**
     * @dev add an extension.  Can only be called by contract owner or admin.
     * Returns True if removed, False if already removed.
     */
    function unregisterExtension(address extension) external;

    /**
     * @dev blacklist an extension.  Can only be called by contract owner or admin.
     * This function will destroy all ability to reference the metadata of any tokens created
     * by the specified extension. It will also unregister the extension if needed.
     * Returns True if removed, False if already removed.
     */
    function blacklistExtension(address extension) external;

    /**
     * @dev set the baseTokenURI of an extension.  Can only be called by extension.
     */
    function setBaseTokenURIExtension(string calldata uri) external;

    /**
     * @dev set the baseTokenURI of an extension.  Can only be called by extension.
     * For tokens with no uri configured, tokenURI will return "uri+tokenId"
     */
    function setBaseTokenURIExtension(string calldata uri, bool identical) external;

    /**
     * @dev set the common prefix of an extension.  Can only be called by extension.
     * If configured, and a token has a uri set, tokenURI will return "prefixURI+tokenURI"
     * Useful if you want to use ipfs/arweave
     */
    function setTokenURIPrefixExtension(string calldata prefix) external;

    /**
     * @dev set the tokenURI of a token extension.  Can only be called by extension that minted token.
     */
    function setTokenURIExtension(uint256 tokenId, string calldata uri) external;

    /**
     * @dev set the tokenURI of a token extension for multiple tokens.  Can only be called by extension that minted token.
     */
    function setTokenURIExtension(uint256[] memory tokenId, string[] calldata uri) external;

    /**
     * @dev set the baseTokenURI for tokens with no extension.  Can only be called by owner/admin.
     * For tokens with no uri configured, tokenURI will return "uri+tokenId"
     */
    function setBaseTokenURI(string calldata uri) external;

    /**
     * @dev set the common prefix for tokens with no extension.  Can only be called by owner/admin.
     * If configured, and a token has a uri set, tokenURI will return "prefixURI+tokenURI"
     * Useful if you want to use ipfs/arweave
     */
    function setTokenURIPrefix(string calldata prefix) external;

    /**
     * @dev set the tokenURI of a token with no extension.  Can only be called by owner/admin.
     */
    function setTokenURI(uint256 tokenId, string calldata uri) external;

    /**
     * @dev set the tokenURI of multiple tokens with no extension.  Can only be called by owner/admin.
     */
    function setTokenURI(uint256[] memory tokenIds, string[] calldata uris) external;

    /**
     * @dev set a permissions contract for an extension.  Used to control minting.
     */
    function setMintPermissions(address extension, address permissions) external;

    /**
     * @dev Configure so transfers of tokens created by the caller (must be extension) gets approval
     * from the extension before transferring
     */
    function setApproveTransferExtension(bool enabled) external;

    /**
     * @dev get the extension of a given token
     */
    function tokenExtension(uint256 tokenId) external view returns (address);

    /**
     * @dev Set default royalties
     */
    function setRoyalties(address payable[] calldata receivers, uint256[] calldata basisPoints) external;

    /**
     * @dev Set royalties of a token
     */
    function setRoyalties(uint256 tokenId, address payable[] calldata receivers, uint256[] calldata basisPoints) external;

    /**
     * @dev Set royalties of an extension
     */
    function setRoyaltiesExtension(address extension, address payable[] calldata receivers, uint256[] calldata basisPoints) external;

    /**
     * @dev Get royalites of a token.  Returns list of receivers and basisPoints
     */
    function getRoyalties(uint256 tokenId) external view returns (address payable[] memory, uint256[] memory);
    
    // Royalty support for various other standards
    function getFeeRecipients(uint256 tokenId) external view returns (address payable[] memory);
    function getFeeBps(uint256 tokenId) external view returns (uint[] memory);
    function getFees(uint256 tokenId) external view returns (address payable[] memory, uint256[] memory);
    function royaltyInfo(uint256 tokenId, uint256 value) external view returns (address, uint256);

}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";

/**
 * @dev Implement this if you want your extension to have overloadable URI's
 */
interface ICreatorExtensionTokenURI is IERC165 {

    /**
     * Get the uri for a given creator/tokenId
     */
    function tokenURI(address creator, uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "./CreatorCore.sol";

/**
 * @dev Core ERC1155 creator interface
 */
interface IERC1155CreatorCore is ICreatorCore {

    /**
     * @dev mint a token with no extension. Can only be called by an admin.
     *
     * @param to       - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
     * @param amounts  - Can be a single element array (all recipients get the same amount) or a multi-element array
     * @param uris     - If no elements, all tokens use the default uri.
     *                   If any element is an empty string, the corresponding token uses the default uri.
     *
     *
     * Requirements: If to is a multi-element array, then uris must be empty or single element array
     *               If to is a multi-element array, then amounts must be a single element array or a multi-element array of the same size
     *               If to is a single element array, uris must be empty or the same length as amounts
     *
     * Examples:
     *    mintBaseNew(['0x....1', '0x....2'], [1], [])
     *        Mints a single new token, and gives 1 each to '0x....1' and '0x....2'.  Token uses default uri.
     *    
     *    mintBaseNew(['0x....1', '0x....2'], [1, 2], [])
     *        Mints a single new token, and gives 1 to '0x....1' and 2 to '0x....2'.  Token uses default uri.
     *    
     *    mintBaseNew(['0x....1'], [1, 2], ["", "http://token2.com"])
     *        Mints two new tokens to '0x....1'. 1 of the first token, 2 of the second.  1st token uses default uri, second uses "http://token2.com".
     *    
     * @return Returns list of tokenIds minted
     */
    function mintBaseNew(address[] calldata to, uint256[] calldata amounts, string[] calldata uris) external returns (uint256[] memory);

    /**
     * @dev batch mint existing token with no extension. Can only be called by an admin.
     *
     * @param to        - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
     * @param tokenIds  - Can be a single element array (all recipients get the same token) or a multi-element array
     * @param amounts   - Can be a single element array (all recipients get the same amount) or a multi-element array
     *
     * Requirements: If any of the parameters are multi-element arrays, they need to be the same length as other multi-element arrays
     *
     * Examples:
     *    mintBaseExisting(['0x....1', '0x....2'], [1], [10])
     *        Mints 10 of tokenId 1 to each of '0x....1' and '0x....2'.
     *    
     *    mintBaseExisting(['0x....1', '0x....2'], [1, 2], [10, 20])
     *        Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 2 to '0x....2'.
     *    
     *    mintBaseExisting(['0x....1'], [1, 2], [10, 20])
     *        Mints 10 of tokenId 1 and 20 of tokenId 2 to '0x....1'.
     *    
     *    mintBaseExisting(['0x....1', '0x....2'], [1], [10, 20])
     *        Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 1 to '0x....2'.
     *    
     */
    function mintBaseExisting(address[] calldata to, uint256[] calldata tokenIds, uint256[] calldata amounts) external;

    /**
     * @dev mint a token from an extension. Can only be called by a registered extension.
     *
     * @param to       - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
     * @param amounts  - Can be a single element array (all recipients get the same amount) or a multi-element array
     * @param uris     - If no elements, all tokens use the default uri.
     *                   If any element is an empty string, the corresponding token uses the default uri.
     *
     *
     * Requirements: If to is a multi-element array, then uris must be empty or single element array
     *               If to is a multi-element array, then amounts must be a single element array or a multi-element array of the same size
     *               If to is a single element array, uris must be empty or the same length as amounts
     *
     * Examples:
     *    mintExtensionNew(['0x....1', '0x....2'], [1], [])
     *        Mints a single new token, and gives 1 each to '0x....1' and '0x....2'.  Token uses default uri.
     *    
     *    mintExtensionNew(['0x....1', '0x....2'], [1, 2], [])
     *        Mints a single new token, and gives 1 to '0x....1' and 2 to '0x....2'.  Token uses default uri.
     *    
     *    mintExtensionNew(['0x....1'], [1, 2], ["", "http://token2.com"])
     *        Mints two new tokens to '0x....1'. 1 of the first token, 2 of the second.  1st token uses default uri, second uses "http://token2.com".
     *    
     * @return Returns list of tokenIds minted
     */
    function mintExtensionNew(address[] calldata to, uint256[] calldata amounts, string[] calldata uris) external returns (uint256[] memory);

    /**
     * @dev batch mint existing token from extension. Can only be called by a registered extension.
     *
     * @param to        - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
     * @param tokenIds  - Can be a single element array (all recipients get the same token) or a multi-element array
     * @param amounts   - Can be a single element array (all recipients get the same amount) or a multi-element array
     *
     * Requirements: If any of the parameters are multi-element arrays, they need to be the same length as other multi-element arrays
     *
     * Examples:
     *    mintExtensionExisting(['0x....1', '0x....2'], [1], [10])
     *        Mints 10 of tokenId 1 to each of '0x....1' and '0x....2'.
     *    
     *    mintExtensionExisting(['0x....1', '0x....2'], [1, 2], [10, 20])
     *        Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 2 to '0x....2'.
     *    
     *    mintExtensionExisting(['0x....1'], [1, 2], [10, 20])
     *        Mints 10 of tokenId 1 and 20 of tokenId 2 to '0x....1'.
     *    
     *    mintExtensionExisting(['0x....1', '0x....2'], [1], [10, 20])
     *        Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 1 to '0x....2'.
     *    
     */
    function mintExtensionExisting(address[] calldata to, uint256[] calldata tokenIds, uint256[] calldata amounts) external;

    /**
     * @dev burn tokens. Can only be called by token owner or approved address.
     * On burn, calls back to the registered extension's onBurn method
     */
    function burn(address account, uint256[] calldata tokenIds, uint256[] calldata amounts) external;

    /**
     * @dev Total amount of tokens in with a given tokenId.
     */
    function totalSupply(uint256 tokenId) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

/**
 * Lazy Claim interface
 */
interface IERC1155LazyPayableClaim {
    enum StorageProtocol { INVALID, NONE, ARWEAVE, IPFS }

    struct ClaimParameters {
        uint32 totalMax;
        uint32 walletMax;
        uint48 startDate;
        uint48 endDate;
        StorageProtocol storageProtocol;
        bytes32 merkleRoot;
        string location;
        uint cost;
        address paymentReceiver;
    }

    struct Claim {
        uint32 total;
        uint32 totalMax;
        uint32 walletMax;
        uint48 startDate;
        uint48 endDate;
        StorageProtocol storageProtocol;
        bytes32 merkleRoot;
        string location;
        uint tokenId;
        uint cost;
        address paymentReceiver;
    }

    event ClaimInitialized(address indexed creatorContract, uint224 indexed claimIndex, address initializer);
    event ClaimMint(address indexed creatorContract, uint256 indexed claimIndex);
    event ClaimMintBatch(address indexed creatorContract, uint256 indexed claimIndex, uint16 mintCount);

    /**
     * @notice initialize a new claim, emit initialize event, and return the newly created index
     * @param creatorContractAddress    the creator contract the claim will mint tokens for
     * @param claimParameters           the parameters which will affect the minting behavior of the claim
     * @return                          the index of the newly created claim
     */
    function initializeClaim(address creatorContractAddress, ClaimParameters calldata claimParameters) external returns(uint256);

    /**
     * @notice update an existing claim at claimIndex
     * @param creatorContractAddress    the creator contract corresponding to the claim
     * @param claimIndex                the index of the claim in the list of creatorContractAddress' _claims
     * @param claimParameters           the parameters which will affect the minting behavior of the claim
     */
    function updateClaim(address creatorContractAddress, uint256 claimIndex, ClaimParameters calldata claimParameters) external;

/**
     * @notice get the number of _claims initialized for a given creator contract
     * @param creatorContractAddress    the address of the creator contract
     * @return                          the number of _claims initialized for this creator contract
     */
    function getClaimCount(address creatorContractAddress) external view returns(uint256);

    /**
     * @notice get a claim corresponding to a creator contract and index
     * @param creatorContractAddress    the address of the creator contract
     * @param claimIndex                the index of the claim
     * @return                          the claim object
     */
    function getClaim(address creatorContractAddress, uint256 claimIndex) external view returns(Claim memory);

    /**
     * @notice check if a mint index has been consumed or not (only for merkle claims)
     *
     * @param creatorContractAddress    the address of the creator contract for the claim
     * @param claimIndex                the index of the claim
     * @param mintIndex                 the mint index of the claim
     * @return                          whether or not the mint index was consumed
     */
    function checkMintIndex(address creatorContractAddress, uint256 claimIndex, uint32 mintIndex) external view returns(bool);

    /**
     * @notice check if multiple mint indices has been consumed or not (only for merkle claims)
     *
     * @param creatorContractAddress    the address of the creator contract for the claim
     * @param claimIndex                the index of the claim
     * @param mintIndices               the mint index of the claim
     * @return                          whether or not the mint index was consumed
     */
    function checkMintIndices(address creatorContractAddress, uint256 claimIndex, uint32[] calldata mintIndices) external view returns(bool[] memory);

    /**
     * @notice get mints made for a wallet (only for non-merkle claims with walletMax)
     *
     * @param minter                    the address of the minting address
     * @param creatorContractAddress    the address of the creator contract for the claim
     * @param claimIndex                the index of the claim
     * @return                          how many mints the minter has made
     */
    function getTotalMints(address minter, address creatorContractAddress, uint256 claimIndex) external view returns(uint32);

    /**
     * @notice allow a wallet to lazily claim a token according to parameters
     * @param creatorContractAddress    the creator contract address
     * @param claimIndex                the index of the claim for which we will mint
     * @param mintIndex                 the mint index (only needed for merkle claims)
     * @param merkleProof               if the claim has a merkleRoot, verifying merkleProof ensures that address + minterValue was used to construct it  (only needed for merkle claims)
     */
    function mint(address creatorContractAddress, uint256 claimIndex, uint32 mintIndex, bytes32[] calldata merkleProof) external payable;

    /**
     * @notice allow a wallet to lazily claim a token according to parameters
     * @param creatorContractAddress    the creator contract address
     * @param claimIndex                the index of the claim for which we will mint
     * @param mintCount                 the number of claims to mint
     * @param mintIndices               the mint index (only needed for merkle claims)
     * @param merkleProofs              if the claim has a merkleRoot, verifying merkleProof ensures that address + minterValue was used to construct it  (only needed for merkle claims)
     */
    function mintBatch(address creatorContractAddress, uint256 claimIndex, uint16 mintCount, uint32[] calldata mintIndices, bytes32[][] calldata merkleProofs) external payable;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC165.sol)

pragma solidity ^0.8.0;

import "../utils/introspection/IERC165.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.0;

/**
 * @dev These functions deal with verification of Merkle Trees proofs.
 *
 * The proofs can be generated using the JavaScript library
 * https://github.com/miguelmota/merkletreejs[merkletreejs].
 * Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
 *
 * See `test/utils/cryptography/MerkleProof.test.js` for some examples.
 */
library MerkleProof {
    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(
        bytes32[] memory proof,
        bytes32 root,
        bytes32 leaf
    ) internal pure returns (bool) {
        return processProof(proof, leaf) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. When processing the proof, the pairs
     * of leafs & pre-images are assumed to be sorted.
     *
     * _Available since v4.4._
     */
    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            bytes32 proofElement = proof[i];
            if (computedHash <= proofElement) {
                // Hash(current computed hash + current element of the proof)
                computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
            } else {
                // Hash(current element of the proof + current computed hash)
                computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
            }
        }
        return computedHash;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

{
  "compilationTarget": {
    "contracts/manifold/lazyclaim/ERC1155LazyPayableClaim.sol": "ERC1155LazyPayableClaim"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 1000
  },
  "remappings": []
}