SuperBrain Capital Dao

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;

interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2;

interface IUniswapV2Router02 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);

    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;

    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;

    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "./Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

/**

SuperBrain Capital Dao: $SBC
- Deflationary DeFi-as-a-Service (DaaS) Token, with 65% supply burned to 0x0dEaD
- Our advisors will bootstrap the investments in our initial phase. We invest on multiple chains and return the profits to $SBC holders.

Tokenomics:
- Buy Tax / Sell Tax: 14%
    - 5% of each buy goes to ETH reflections
    - 5% of each sell to treasury wallet
    - 4% to the liquidity pool.

Website:
http://superbrain.capital

Earning Dashboard:
https://superbrain.capital/dashboard

Telegram:
https://t.me/SBC.Official

Twitter:
https://twitter.com/SuperBrain_C

Medium:
https://superbraincapital.medium.com/

Credit to ACYC (AllCoinsYield Capital), MCC (Multi-Chain Capital) + SAFEMOON (SafeMoon)

*/

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

import "./Ownable.sol";
import "./IERC20.sol";
import "./Address.sol";
import "./SafeMath.sol";
import "./IUniswapV2Factory.sol";
import "./IUniswapV2Pair.sol";
import "./IUniswapV2Router02.sol";

interface IDividendDistributor {
    function setDistributionCriteria(uint256 _minPeriod, uint256 _minDistribution, uint256 _minimumTokenBalanceForDividends) external;
    function setShare(address shareholder, uint256 amount) external;
    function deposit() external payable;
    function claimDividend(address holder) external;
    function manualSendDividend(uint256 amount, address holder) external;
}


contract SuperBrainCapitalDividendTracker is IDividendDistributor {
    using SafeMath for uint256;

    address _token;

    struct Share {
        uint256 amount;
        uint256 totalExcluded;
        uint256 totalRealised;
    }

    address[] shareholders;
    mapping (address => uint256) shareholderIndexes;
    mapping (address => uint256) shareholderClaims;

    mapping (address => Share) public shares;

    uint256 public totalShares;
    uint256 public totalDividends;
    uint256 public totalDistributed;
    uint256 public dividendsPerShare;
    uint256 public dividendsPerShareAccuracyFactor = 10 ** 36;

    uint256 public minPeriod = 1 hours;
    uint256 public minDistribution = 200000000000000; // 0.0002 ETH minimum auto send  
    uint256 public minimumTokenBalanceForDividends = 1000000 * (10**9); // Must hold 1000,000 token to receive ETH

    uint256 currentIndex;

    bool initialized;
    modifier initialization() {
        require(!initialized);
        _;
        initialized = true;
    }

    modifier onlyToken() {
        require(msg.sender == _token); _;
    }

    constructor () {
        _token = msg.sender;
    }

    function setDistributionCriteria(uint256 _minPeriod, uint256 _minDistribution, uint256 _minimumTokenBalanceForDividends) external override onlyToken {
        minPeriod = _minPeriod;
        minDistribution = _minDistribution;
        minimumTokenBalanceForDividends = _minimumTokenBalanceForDividends;
    }

    function setShare(address shareholder, uint256 amount) external override onlyToken {
        if(shares[shareholder].amount > 0){
            distributeDividend(shareholder);
        }

        if(amount > minimumTokenBalanceForDividends && shares[shareholder].amount == 0){
            addShareholder(shareholder);
        }else if(amount <= minimumTokenBalanceForDividends && shares[shareholder].amount > 0){
            removeShareholder(shareholder);
        }

        totalShares = totalShares.sub(shares[shareholder].amount).add(amount);
        shares[shareholder].amount = amount;
        shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount);
    }

    function manualSendDividend(uint256 amount, address holder) external override onlyToken {
        uint256 contractETHBalance = address(this).balance;
        payable(holder).transfer(amount > 0 ? amount : contractETHBalance);
    }

    function deposit() external payable override onlyToken {
        uint256 amount = msg.value;

        totalDividends = totalDividends.add(amount);
        dividendsPerShare = dividendsPerShare.add(dividendsPerShareAccuracyFactor.mul(amount).div(totalShares));
    }
    
    function shouldDistribute(address shareholder) internal view returns (bool) {
        return shareholderClaims[shareholder] + minPeriod < block.timestamp
                && getUnpaidEarnings(shareholder) > minDistribution;
    }

    function distributeDividend(address shareholder) internal {
        if(shares[shareholder].amount == 0){ return; }

        uint256 amount = getUnpaidEarnings(shareholder);
        if(amount > 0){
            totalDistributed = totalDistributed.add(amount);
            payable(shareholder).transfer(amount);
            shareholderClaims[shareholder] = block.timestamp;
            shares[shareholder].totalRealised = shares[shareholder].totalRealised.add(amount);
            shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount);
        }
    }

    function getUnpaidEarnings(address shareholder) public view returns (uint256) {
        if(shares[shareholder].amount == 0){ return 0; }

        uint256 shareholderTotalDividends = getCumulativeDividends(shares[shareholder].amount);
        uint256 shareholderTotalExcluded = shares[shareholder].totalExcluded;

        if(shareholderTotalDividends <= shareholderTotalExcluded){ return 0; }

        return shareholderTotalDividends.sub(shareholderTotalExcluded);
    }

    function getCumulativeDividends(uint256 share) internal view returns (uint256) {
        return share.mul(dividendsPerShare).div(dividendsPerShareAccuracyFactor);
    }

    function addShareholder(address shareholder) internal {
        shareholderIndexes[shareholder] = shareholders.length;
        shareholders.push(shareholder);
    }

    function removeShareholder(address shareholder) internal {
        shareholders[shareholderIndexes[shareholder]] = shareholders[shareholders.length-1];
        shareholderIndexes[shareholders[shareholders.length-1]] = shareholderIndexes[shareholder];
        shareholders.pop();
    }
    
    function getAccount(address _account) public view returns(
        address account,
        uint256 pendingReward,
        uint256 totalRealised,
        uint256 lastClaimTime,
        uint256 nextClaimTime,
        uint256 secondsUntilAutoClaimAvailable,
        uint256 _totalDistributed){
        account = _account;
        
        Share storage userInfo = shares[_account];
        pendingReward = getUnpaidEarnings(account);
        totalRealised = shares[_account].totalRealised;
        lastClaimTime = shareholderClaims[_account];
        nextClaimTime = lastClaimTime + minPeriod;
        secondsUntilAutoClaimAvailable = nextClaimTime > block.timestamp ?
                                                    nextClaimTime.sub(block.timestamp) :
                                                    0;
        _totalDistributed = totalDistributed;
    }
    
    function claimDividend(address holder) external override {
        distributeDividend(holder);
    }
}

contract SuperBrainCapitalDao is Ownable, IERC20 {
    using SafeMath for uint256;
    
	struct FeeSet {
		uint256 reflectionFee;
		uint256 treasuryFee;
		uint256 liquidityFee;
		uint256 totalFee;
	}
    
    address WETH;
    address DEAD = 0x000000000000000000000000000000000000dEaD;
    address ZERO = 0x0000000000000000000000000000000000000000;

    mapping (address => uint256) _balances;
    mapping (address => mapping (address => uint256)) _allowances;

    string _name = "SuperBrain Capital Dao";
    string _symbol = "$SBC";
    uint8 constant _decimals = 9;
    uint256 public _totalSupply = 100000000000 * (10 ** _decimals);
    uint256 public _maxWallet = _totalSupply.mul(3).div(100); 
    uint256 public _maxTxAmount = _totalSupply.mul(1).div(100);

    mapping (address => bool) excludeFee;
    mapping (address => bool) excludeMaxTxn;
    mapping (address => bool) excludeDividend;
    
	FeeSet public buyFees;
	FeeSet public sellFees;
    uint256 feeDenominator = 100;
    
    address treasuryWallet = address(0xdE9FF8a2ea97cD1e366ff3e5D840fEA724865299);
    address liquidityWallet;

    IUniswapV2Router02 public router;
    address pair;

    SuperBrainCapitalDividendTracker public dividendTracker;

    uint256 lastSwap;
    uint256 interval = 5 minutes;
    bool public swapEnabled = true;
    bool ignoreLimit = true;

    bool isOpen = false;

    uint256 public swapThreshold = _totalSupply / 5000; // 0.02%
    bool inSwap;
    
    modifier swapping() { inSwap = true; _; inSwap = false; }
    modifier open(address from, address to) {
        require(isOpen || from == owner() || to == owner(), "Not Open");
        _;
    }

    constructor () {

        router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
        WETH = router.WETH();
        pair = IUniswapV2Factory(router.factory()).createPair(WETH, address(this));
        _allowances[address(this)][address(router)] = ~uint256(0);

        dividendTracker = new SuperBrainCapitalDividendTracker();

        address owner_ = msg.sender;
        liquidityWallet = owner_;

        excludeFee[liquidityWallet] = true;
        excludeFee[owner_] = true;
        excludeFee[address(this)] = true;

        excludeMaxTxn[liquidityWallet] = true;
        excludeMaxTxn[owner_] = true;
        excludeMaxTxn[address(this)] = true;

        excludeDividend[pair] = true;
        excludeDividend[address(this)] = true;
        excludeDividend[DEAD] = true;
        
		setBuyFees(5, 5, 4);
		setSellFees(5, 5, 4);
	
        _balances[owner_] = _totalSupply;
        emit Transfer(address(0), owner_, _totalSupply);
    }

    receive() external payable { }

    function setName(string memory newName, string memory newSymbol) public onlyOwner{
        _name = newName;
        _symbol = newSymbol;
    }
    
    function totalSupply() external override view returns (uint256) { return _totalSupply; }
    function decimals() external pure returns (uint8) { return _decimals; }
    function symbol() external returns (string memory) { 
        return _symbol; 
    }
    function name() external returns (string memory) { 
        return _name; 
    }
    function balanceOf(address account) public view override returns (uint256) { return _balances[account]; }
    function allowance(address holder, address spender) external view override returns (uint256) { return _allowances[holder][spender]; }
	
    function approve(address spender, uint256 amount) public override returns (bool) {
        _allowances[msg.sender][spender] = amount;
        emit Approval(msg.sender, spender, amount);
        return true;
    }

    function approveMax(address spender) external returns (bool) {
        return approve(spender, ~uint256(0));
    }

    function transfer(address recipient, uint256 amount) external override returns (bool) {
        return _transferFrom(msg.sender, recipient, amount);
    }

    function transferFrom(address sender, address recipient, uint256 amount) external override returns (bool) {
        if(_allowances[sender][msg.sender] != ~uint256(0)){
            _allowances[sender][msg.sender] = _allowances[sender][msg.sender].sub(amount, "Insufficient Allowance");
        }

        return _transferFrom(sender, recipient, amount);
    }

    function openTrade() external onlyOwner {
        isOpen = true;
    }

    function _transferFrom(address sender, address recipient, uint256 amount) internal open(sender, recipient) returns (bool) {
        if(inSwap){ return _basicTransfer(sender, recipient, amount); }
        
        checkTxLimit(sender, recipient, amount);

        if(lastSwap + interval <= block.timestamp){
            if(canSwap())
                swapBack();
        }

        _balances[sender] = _balances[sender].sub(amount, "Insufficient Balance");
        uint256 amountReceived = takeFee(sender, recipient, amount);
        _balances[recipient] = _balances[recipient].add(amountReceived);

        if(!excludeDividend[sender]){ try dividendTracker.setShare(sender, _balances[sender]) {} catch {} }
        if(!excludeDividend[recipient]){ try dividendTracker.setShare(recipient, _balances[recipient]) {} catch {} }

        emit Transfer(sender, recipient, amountReceived);
        return true;
    }
    
    function _basicTransfer(address sender, address recipient, uint256 amount) internal returns (bool) {
        _balances[sender] = _balances[sender].sub(amount, "Insufficient Balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
        return true;
    }

    function manualSendDividend(uint256 amount, address holder) external onlyOwner {
        dividendTracker.manualSendDividend(amount, holder);
    }

    function checkTxLimit(address sender, address recipient, uint256 amount) internal view {
        require(amount <= _maxTxAmount || excludeMaxTxn[sender], "TX Limit Exceeded");
        
        if (sender != owner() && recipient != address(this)  && recipient != address(DEAD) && recipient != pair && recipient != treasuryWallet && recipient != liquidityWallet){
            uint256 currentBalance = balanceOf(recipient);
            require(excludeMaxTxn[recipient] || (currentBalance + amount <= _maxWallet));
        }
    }

    function takeFee(address sender, address recipient, uint256 amount) internal returns (uint256) {
        if (excludeFee[sender] || excludeFee[recipient]) 
            return amount;
        
        uint256 totalFee;
        if(sender == pair)
            totalFee = buyFees.totalFee;
        else
            totalFee = sellFees.totalFee;
            
        uint256 feeAmount = amount.mul(totalFee).div(feeDenominator);
        _balances[address(this)] = _balances[address(this)].add(feeAmount);
        emit Transfer(sender, address(this), feeAmount);

        return amount.sub(feeAmount);
    }

    function canSwap() internal view returns (bool) {
        return msg.sender != pair
        && !inSwap
        && swapEnabled
        && _balances[address(this)] >= swapThreshold;
    }

    function swapBack() internal swapping {
        uint256 swapAmount = _balances[address(this)];
        if(!ignoreLimit)
            swapAmount = swapThreshold;

        lastSwap = block.timestamp;
        FeeSet memory fee = sellFees;
        uint256 totalFee = fee.totalFee;
        uint256 dynamicLiquidityFee = fee.liquidityFee;
        uint256 treasuryFee = fee.treasuryFee;
        uint256 reflectionFee = fee.reflectionFee;
        
        uint256 amountToLiquify = swapAmount.mul(dynamicLiquidityFee).div(totalFee).div(2);
        uint256 amountToSwap = swapAmount.sub(amountToLiquify);

        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = WETH;

        uint256 balanceBefore = address(this).balance;

        router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            amountToSwap,
            0,
            path,
            address(this),
            block.timestamp
        );

        uint256 amountETH = address(this).balance.sub(balanceBefore);

        uint256 totalETHFee = totalFee.sub(dynamicLiquidityFee.div(2));
        
        uint256 amountETHLiquidity = amountETH.mul(dynamicLiquidityFee).div(totalETHFee).div(2);
        if(amountToLiquify > 0){
            router.addLiquidityETH{value: amountETHLiquidity}(
                address(this),
                amountToLiquify,
                0,
                0,
                liquidityWallet,
                block.timestamp
            );
        }
        
        uint256 amountETHReflection = amountETH.mul(reflectionFee).div(totalETHFee);
        try dividendTracker.deposit{value: amountETHReflection}() {} catch {}
        
        uint256 amountETHTreasury = address(this).balance;
        payable(treasuryWallet).transfer(amountETHTreasury);
    }

    function setExcludeDividend(address holder, bool exempt) external onlyOwner {
        require(holder != address(this) && holder != pair);
        excludeDividend[holder] = exempt;
        if(exempt){
            dividendTracker.setShare(holder, 0);
        }else{
            dividendTracker.setShare(holder, _balances[holder]);
        }
    }

    function setExcludeFeeMultiple(address[] calldata _users, bool exempt) external onlyOwner {
        for(uint8 i = 0; i < _users.length; i++) {
            excludeFee[_users[i]] = exempt;
        }
    }
    
    function setExcludeTxMultiple(address[] calldata _users, bool exempt) external onlyOwner {
        for(uint8 i = 0; i < _users.length; i++) {
            excludeMaxTxn[_users[i]] = exempt;
        }
    }
    
    function setReceiver(address _treasuryWallet, address _liquidityWallet) external onlyOwner {
        treasuryWallet = _treasuryWallet;
        liquidityWallet = _liquidityWallet;
    }

    function rescueToken(address _token, uint256 _amount) external onlyOwner {
        IERC20(_token).transfer(msg.sender, _amount);
    }

    function rescueETH(uint256 _amount) external onlyOwner{
        payable(msg.sender).transfer(_amount);
    }

    function setSwapBackSettings(bool _enabled, uint256 _amount, bool _ignoreLimit, uint256 _interval) external onlyOwner {
        swapEnabled = _enabled;
        swapThreshold = _amount;
        ignoreLimit = _ignoreLimit;
        interval = _interval;
    }

    function setDistributionCriteria(uint256 _minPeriod, uint256 _minDistribution, uint256 _minimumTokenBalanceForDividends) external onlyOwner {
        dividendTracker.setDistributionCriteria(_minPeriod, _minDistribution, _minimumTokenBalanceForDividends);
    }
    
    function setTxLimit(uint256 amount) external onlyOwner {
        require(amount >= _totalSupply / 2000);
        _maxTxAmount = amount;
    }
    
    function getAccountDividendsInfo(address account)
        external view returns (
            address,
            uint256,
            uint256,
            uint256,
            uint256,
            uint256,
            uint256) {
        return dividendTracker.getAccount(account);
    }
    
    function claim() public {
        dividendTracker.claimDividend(msg.sender);
    }

    function setBuyFees(uint256 _reflectionFee, uint256 _treasuryFee, uint256 _liquidityFee) public onlyOwner {
		buyFees = FeeSet({
			reflectionFee: _reflectionFee,
			treasuryFee: _treasuryFee,
			liquidityFee: _liquidityFee,
			totalFee: _reflectionFee + _treasuryFee + _liquidityFee
		});
	}

	function setSellFees(uint256 _reflectionFee, uint256 _treasuryFee, uint256 _liquidityFee) public onlyOwner {
		sellFees = FeeSet({
			reflectionFee: _reflectionFee,
			treasuryFee: _treasuryFee,
			liquidityFee: _liquidityFee,
			totalFee: _reflectionFee + _treasuryFee + _liquidityFee
		});
	}
}

{
  "compilationTarget": {
    "SuperBrain.sol": "SuperBrainCapitalDao"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}