// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)pragmasolidity ^0.8.0;/**
* @dev Collection of functions related to the address type
*/libraryAddress{
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/functionisContract(address account) internalviewreturns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in// construction, since the code is only stored at the end of the// constructor execution.uint256 size;
assembly {
size :=extcodesize(account)
}
return size >0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/functionsendValue(addresspayable recipient, uint256 amount) internal{
require(address(this).balance>= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/functionfunctionCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target,
bytesmemory data,
uint256 value
) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target,
bytesmemory data,
uint256 value,
stringmemory errorMessage
) internalreturns (bytesmemory) {
require(address(this).balance>= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytesmemory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target, bytesmemory data) internalviewreturns (bytesmemory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalviewreturns (bytesmemory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytesmemory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/functionfunctionDelegateCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/functionfunctionDelegateCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalreturns (bytesmemory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytesmemory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/functionverifyCallResult(bool success,
bytesmemory returndata,
stringmemory errorMessage
) internalpurereturns (bytesmemory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if presentif (returndata.length>0) {
// The easiest way to bubble the revert reason is using memory via assemblyassembly {
let returndata_size :=mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
Contract Source Code
File 3 of 19: AdminControl.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/// @author: manifold.xyzimport"@openzeppelin/contracts/utils/introspection/ERC165.sol";
import"@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import"@openzeppelin/contracts/access/Ownable.sol";
import"./IAdminControl.sol";
abstractcontractAdminControlisOwnable, IAdminControl, ERC165{
usingEnumerableSetforEnumerableSet.AddressSet;
// Track registered admins
EnumerableSet.AddressSet private _admins;
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverride(ERC165, IERC165) returns (bool) {
return interfaceId ==type(IAdminControl).interfaceId||super.supportsInterface(interfaceId);
}
/**
* @dev Only allows approved admins to call the specified function
*/modifieradminRequired() {
require(owner() ==msg.sender|| _admins.contains(msg.sender), "AdminControl: Must be owner or admin");
_;
}
/**
* @dev See {IAdminControl-getAdmins}.
*/functiongetAdmins() externalviewoverridereturns (address[] memory admins) {
admins =newaddress[](_admins.length());
for (uint i =0; i < _admins.length(); i++) {
admins[i] = _admins.at(i);
}
return admins;
}
/**
* @dev See {IAdminControl-approveAdmin}.
*/functionapproveAdmin(address admin) externaloverrideonlyOwner{
if (!_admins.contains(admin)) {
emit AdminApproved(admin, msg.sender);
_admins.add(admin);
}
}
/**
* @dev See {IAdminControl-revokeAdmin}.
*/functionrevokeAdmin(address admin) externaloverrideonlyOwner{
if (_admins.contains(admin)) {
emit AdminRevoked(admin, msg.sender);
_admins.remove(admin);
}
}
/**
* @dev See {IAdminControl-isAdmin}.
*/functionisAdmin(address admin) publicoverrideviewreturns (bool) {
return (owner() == admin || _admins.contains(admin));
}
}
Contract Source Code
File 4 of 19: CollectionBase.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/// @author: manifold.xyzimport"@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import"@openzeppelin/contracts/utils/Strings.sol";
import"./ICollectionBase.sol";
/**
* Collection Drop Contract (Base)
*/abstractcontractCollectionBaseisICollectionBase{
usingECDSAforbytes32;
usingStringsforuint256;
// Immutable variables that should only be set by the constructor or initializeraddressinternal _signingAddress;
// Message noncesmapping(string=>bool) private _usedNonces;
// Sale start/end controlboolpublic active;
uint256public startTime;
uint256public endTime;
uint256public presaleInterval;
// Claim period start/end controluint256public claimStartTime;
uint256public claimEndTime;
/**
* Withdraw funds
*/function_withdraw(addresspayable recipient, uint256 amount) internal{
(bool success,) = recipient.call{value:amount}("");
require(success);
}
/**
* Activate the sale
*/function_activate(uint256 startTime_, uint256 duration, uint256 presaleInterval_, uint256 claimStartTime_, uint256 claimEndTime_) internalvirtual{
require(!active, "Already active");
require(startTime_ >block.timestamp, "Cannot activate in the past");
require(presaleInterval_ < duration, "Presale Interval cannot be longer than the sale");
require(claimStartTime_ <= claimEndTime_ && claimEndTime_ <= startTime_, "Invalid claim times");
startTime = startTime_;
endTime = startTime + duration;
presaleInterval = presaleInterval_;
claimStartTime = claimStartTime_;
claimEndTime = claimEndTime_;
active =true;
emit CollectionActivated(startTime, endTime, presaleInterval, claimStartTime, claimEndTime);
}
/**
* Deactivate the sale
*/function_deactivate() internalvirtual{
startTime =0;
endTime =0;
active =false;
claimStartTime =0;
claimEndTime =0;
emit CollectionDeactivated();
}
/**
* Validate claim signature
*/function_validateClaimRequest(bytes32 message, bytescalldata signature, stringcalldata nonce, uint16 amount) internalvirtual{
// Verify nonce usage/re-userequire(!_usedNonces[nonce], "Cannot replay transaction");
// Verify valid message based on input variablesbytes32 expectedMessage =keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", (20+bytes(nonce).length+bytes(uint256(amount).toString()).length).toString(), msg.sender, nonce, uint256(amount).toString()));
require(message == expectedMessage, "Malformed message");
// Verify signature was performed by the expected signing addressaddress signer = message.recover(signature);
require(signer == _signingAddress, "Invalid signature");
_usedNonces[nonce] =true;
}
/**
* Validate claim restrictions
*/function_validateClaimRestrictions() internalvirtual{
require(active, "Inactive");
require(block.timestamp>= claimStartTime &&block.timestamp<= claimEndTime, "Outside claim period.");
}
/**
* Validate purchase signature
*/function_validatePurchaseRequest(bytes32 message, bytescalldata signature, stringcalldata nonce) internalvirtual{
// Verify nonce usage/re-userequire(!_usedNonces[nonce], "Cannot replay transaction");
// Verify valid message based on input variablesbytes32 expectedMessage =keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", (20+bytes(nonce).length).toString(), msg.sender, nonce));
require(message == expectedMessage, "Malformed message");
// Verify signature was performed by the expected signing addressaddress signer = message.recover(signature);
require(signer == _signingAddress, "Invalid signature");
_usedNonces[nonce] =true;
}
/**
* Perform purchase restriciton checks. Override if more logic is needed
*/function_validatePurchaseRestrictions() internalvirtual{
require(active, "Inactive");
require(block.timestamp>= startTime, "Purchasing not active");
}
/**
* @dev See {ICollectionBase-nonceUsed}.
*/functionnonceUsed(stringmemory nonce) externalviewoverridereturns(bool) {
return _usedNonces[nonce];
}
}
Contract Source Code
File 5 of 19: Context.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)pragmasolidity ^0.8.0;/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/abstractcontractContext{
function_msgSender() internalviewvirtualreturns (address) {
returnmsg.sender;
}
function_msgData() internalviewvirtualreturns (bytescalldata) {
returnmsg.data;
}
}
Contract Source Code
File 6 of 19: ECDSA.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/cryptography/ECDSA.sol)pragmasolidity ^0.8.0;import"../Strings.sol";
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/libraryECDSA{
enumRecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV
}
function_throwError(RecoverError error) privatepure{
if (error == RecoverError.NoError) {
return; // no error: do nothing
} elseif (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} elseif (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} elseif (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
} elseif (error == RecoverError.InvalidSignatureV) {
revert("ECDSA: invalid signature 'v' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/functiontryRecover(bytes32 hash, bytesmemory signature) internalpurereturns (address, RecoverError) {
// Check the signature length// - case 65: r,s,v signature (standard)// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._if (signature.length==65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them// currently is to use assembly.assembly {
r :=mload(add(signature, 0x20))
s :=mload(add(signature, 0x40))
v :=byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} elseif (signature.length==64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them// currently is to use assembly.assembly {
r :=mload(add(signature, 0x20))
vs :=mload(add(signature, 0x40))
}
return tryRecover(hash, r, vs);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/functionrecover(bytes32 hash, bytesmemory signature) internalpurereturns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/functiontryRecover(bytes32 hash,
bytes32 r,
bytes32 vs
) internalpurereturns (address, RecoverError) {
bytes32 s;
uint8 v;
assembly {
s :=and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
v :=add(shr(255, vs), 27)
}
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/functionrecover(bytes32 hash,
bytes32 r,
bytes32 vs
) internalpurereturns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/functiontryRecover(bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internalpurereturns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most// signatures from current libraries generate a unique signature with an s-value in the lower half order.//// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept// these malleable signatures as well.if (uint256(s) >0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
if (v !=27&& v !=28) {
return (address(0), RecoverError.InvalidSignatureV);
}
// If the signature is valid (and not malleable), return the signer addressaddress signer =ecrecover(hash, v, r, s);
if (signer ==address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/functionrecover(bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internalpurereturns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/functiontoEthSignedMessageHash(bytes32 hash) internalpurereturns (bytes32) {
// 32 is the length in bytes of hash,// enforced by the type signature abovereturnkeccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/functiontoEthSignedMessageHash(bytesmemory s) internalpurereturns (bytes32) {
returnkeccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/functiontoTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internalpurereturns (bytes32) {
returnkeccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
Contract Source Code
File 7 of 19: ERC1155.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (token/ERC1155/ERC1155.sol)pragmasolidity ^0.8.0;import"./IERC1155.sol";
import"./IERC1155Receiver.sol";
import"./extensions/IERC1155MetadataURI.sol";
import"../../utils/Address.sol";
import"../../utils/Context.sol";
import"../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/contractERC1155isContext, ERC165, IERC1155, IERC1155MetadataURI{
usingAddressforaddress;
// Mapping from token ID to account balancesmapping(uint256=>mapping(address=>uint256)) private _balances;
// Mapping from account to operator approvalsmapping(address=>mapping(address=>bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.jsonstringprivate _uri;
/**
* @dev See {_setURI}.
*/constructor(stringmemory uri_) {
_setURI(uri_);
}
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverride(ERC165, IERC165) returns (bool) {
return
interfaceId ==type(IERC1155).interfaceId||
interfaceId ==type(IERC1155MetadataURI).interfaceId||super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/functionuri(uint256) publicviewvirtualoverridereturns (stringmemory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/functionbalanceOf(address account, uint256 id) publicviewvirtualoverridereturns (uint256) {
require(account !=address(0), "ERC1155: balance query for the zero address");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/functionbalanceOfBatch(address[] memory accounts, uint256[] memory ids)
publicviewvirtualoverridereturns (uint256[] memory)
{
require(accounts.length== ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances =newuint256[](accounts.length);
for (uint256 i =0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/functionsetApprovalForAll(address operator, bool approved) publicvirtualoverride{
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/functionisApprovedForAll(address account, address operator) publicviewvirtualoverridereturns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 id,
uint256 amount,
bytesmemory data
) publicvirtualoverride{
require(
from== _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/functionsafeBatchTransferFrom(addressfrom,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
) publicvirtualoverride{
require(
from== _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: transfer caller is not owner nor approved"
);
_safeBatchTransferFrom(from, to, ids, amounts, data);
}
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/function_safeTransferFrom(addressfrom,
address to,
uint256 id,
uint256 amount,
bytesmemory data
) internalvirtual{
require(to !=address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/function_safeBatchTransferFrom(addressfrom,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
) internalvirtual{
require(ids.length== amounts.length, "ERC1155: ids and amounts length mismatch");
require(to !=address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i =0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/function_setURI(stringmemory newuri) internalvirtual{
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/function_mint(address to,
uint256 id,
uint256 amount,
bytesmemory data
) internalvirtual{
require(to !=address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, _asSingletonArray(id), _asSingletonArray(amount), data);
_balances[id][to] += amount;
emit TransferSingle(operator, address(0), to, id, amount);
_doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/function_mintBatch(address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
) internalvirtual{
require(to !=address(0), "ERC1155: mint to the zero address");
require(ids.length== amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint256 i =0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `from`
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `from` must have at least `amount` tokens of token type `id`.
*/function_burn(addressfrom,
uint256 id,
uint256 amount
) internalvirtual{
require(from!=address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
emit TransferSingle(operator, from, address(0), id, amount);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/function_burnBatch(addressfrom,
uint256[] memory ids,
uint256[] memory amounts
) internalvirtual{
require(from!=address(0), "ERC1155: burn from the zero address");
require(ids.length== amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
for (uint256 i =0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
}
emit TransferBatch(operator, from, address(0), ids, amounts);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/function_setApprovalForAll(address owner,
address operator,
bool approved
) internalvirtual{
require(owner != operator, "ERC1155: setting approval status for self");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/function_beforeTokenTransfer(address operator,
addressfrom,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
) internalvirtual{}
function_doSafeTransferAcceptanceCheck(address operator,
addressfrom,
address to,
uint256 id,
uint256 amount,
bytesmemory data
) private{
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155Receiver.onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catchError(stringmemory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function_doSafeBatchTransferAcceptanceCheck(address operator,
addressfrom,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
) private{
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
bytes4 response
) {
if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catchError(stringmemory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function_asSingletonArray(uint256 element) privatepurereturns (uint256[] memory) {
uint256[] memory array =newuint256[](1);
array[0] = element;
return array;
}
}
Contract Source Code
File 8 of 19: ERC1155CollectionBase.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/// @author: manifold.xyzimport"@openzeppelin/contracts/utils/Strings.sol";
import"./IERC1155Collection.sol";
import"./CollectionBase.sol";
/**
* ERC721 Collection Drop Contract (Base)
*/abstractcontractERC1155CollectionBaseisCollectionBase, IERC1155Collection{
// Token ID to mintuint16internalconstant TOKEN_ID =1;
// Immutable variables that should only be set by the constructor or initializeruint16public transactionLimit;
uint16public purchaseMax;
uint16public purchaseLimit;
uint256public purchasePrice;
uint16public presalePurchaseLimit;
uint256public presalePurchasePrice;
uint16public maxSupply;
// Mutable mint stateuint16public purchaseCount;
uint16public reserveCount;
mapping(address=>uint16) private _mintCount;
// Royaltyaddresspayableprivate _royaltyRecipient;
uint256private _royaltyBps;
// Transfer lockboolpublic transferLocked;
/**
* Initializer
*/function_initialize(uint16 maxSupply_, uint16 purchaseMax_, uint256 purchasePrice_, uint16 purchaseLimit_, uint16 transactionLimit_, uint256 presalePurchasePrice_, uint16 presalePurchaseLimit_, address signingAddress_) internal{
require(_signingAddress ==address(0), "Already initialized");
require(maxSupply_ >= purchaseMax_, "Invalid input");
maxSupply = maxSupply_;
purchaseMax = purchaseMax_;
purchasePrice = purchasePrice_;
purchaseLimit = purchaseLimit_;
transactionLimit = transactionLimit_;
presalePurchaseLimit = presalePurchaseLimit_;
presalePurchasePrice = presalePurchasePrice_;
_signingAddress = signingAddress_;
}
/**
* @dev See {IERC1155Collection-claim}.
*/functionclaim(uint16 amount, bytes32 message, bytescalldata signature, stringcalldata nonce) externalvirtualoverride{
_validateClaimRestrictions();
_validateClaimRequest(message, signature, nonce, amount);
_mint(msg.sender, amount, true);
}
/**
* @dev See {IERC1155Collection-purchase}.
*/functionpurchase(uint16 amount, bytes32 message, bytescalldata signature, stringcalldata nonce) externalvirtualoverridepayable{
_validatePurchaseRestrictions();
// Check purchase amountsrequire(amount <= purchaseRemaining() && (transactionLimit ==0|| amount <= transactionLimit), "Too many requested");
uint256 balance;
if (!transferLocked && (presalePurchaseLimit >0|| purchaseLimit >0)) {
balance = _mintCount[msg.sender];
} else {
balance = balanceOf(msg.sender);
}
bool presale;
if (block.timestamp- startTime < presaleInterval) {
require((presalePurchaseLimit ==0|| amount <= (presalePurchaseLimit - balance)) && (purchaseLimit ==0|| amount <= (purchaseLimit - balance)), "Too many requested");
_validatePresalePrice(amount);
presale =true;
} else {
require(purchaseLimit ==0|| amount <= (purchaseLimit - balance), "Too many requested");
_validatePrice(amount);
}
_validatePurchaseRequest(message, signature, nonce);
_mint(msg.sender, amount, presale);
}
/**
* @dev See {IERC1155Collection-state}
*/functionstate() externaloverrideviewreturns (CollectionState memory) {
if (msg.sender==address(0)) {
// No message sender, no purchase balancereturn CollectionState(transactionLimit, purchaseMax, purchaseRemaining(), purchasePrice, purchaseLimit, presalePurchasePrice, presalePurchaseLimit, 0, active, startTime, endTime, presaleInterval, claimStartTime, claimEndTime);
} else {
if (!transferLocked && (presalePurchaseLimit >0|| purchaseLimit >0)) {
return CollectionState(transactionLimit, purchaseMax, purchaseRemaining(), purchasePrice, purchaseLimit, presalePurchasePrice, presalePurchaseLimit, _mintCount[msg.sender], active, startTime, endTime, presaleInterval, claimStartTime, claimEndTime);
} else {
return CollectionState(transactionLimit, purchaseMax, purchaseRemaining(), purchasePrice, purchaseLimit, presalePurchasePrice, presalePurchaseLimit, uint16(balanceOf(msg.sender)), active, startTime, endTime, presaleInterval, claimStartTime, claimEndTime);
}
}
}
/**
* @dev Get balance of address. Similar to IERC1155-balanceOf, but doesn't require token ID
* @param owner The address to get the token balance of
*/functionbalanceOf(address owner) publicvirtualoverrideviewreturns (uint256);
/**
* @dev See {IERC1155Collection-purchaseRemaining}.
*/functionpurchaseRemaining() publicvirtualoverrideviewreturns (uint16) {
return purchaseMax - purchaseCount;
}
/**
* @dev See {IERC1155Collection-getRoyalties}.
*/functiongetRoyalties(uint256) externaloverrideviewreturns (addresspayable, uint256) {
return (_royaltyRecipient, _royaltyBps);
}
/**
* @dev See {IERC1155Collection-royaltyInfo}.
*/functionroyaltyInfo(uint256, uint256 salePrice) externaloverrideviewreturns (address, uint256) {
return (_royaltyRecipient, (salePrice * _royaltyBps) /10000);
}
/**
* Premint tokens to the owner. Purchase must not be active.
*/function_premint(uint16 amount, address owner) internalvirtual{
require(!active, "Already active");
_mint(owner, amount, true);
}
/**
* Premint tokens to the list of addresses. Purchase must not be active.
*/function_premint(uint16[] calldata amounts, address[] calldata addresses) internalvirtual{
require(!active, "Already active");
for (uint256 i =0; i < addresses.length; i++) {
_mint(addresses[i], amounts[i], true);
}
}
/**
* Mint reserve tokens. Purchase must be completed.
*/function_mintReserve(uint16 amount, address owner) internalvirtual{
require(endTime !=0&& endTime <=block.timestamp, "Cannot mint reserve until after sale complete");
require(purchaseCount + reserveCount + amount <= maxSupply, "Too many requested");
reserveCount += amount;
_mintERC1155(owner, amount);
}
/**
* Mint reserve tokens. Purchase must be completed.
*/function_mintReserve(uint16[] calldata amounts, address[] calldata addresses) internalvirtual{
require(endTime !=0&& endTime <=block.timestamp, "Cannot mint reserve until after sale complete");
uint16 totalAmount;
for (uint256 i =0; i < addresses.length; i++) {
totalAmount += amounts[i];
}
require(purchaseCount + reserveCount + totalAmount <= maxSupply, "Too many requested");
reserveCount += totalAmount;
for (uint256 i =0; i < addresses.length; i++) {
_mintERC1155(addresses[i], amounts[i]);
}
}
/**
* Mint function internal to ERC1155CollectionBase to keep track of state
*/function_mint(address to, uint16 amount, bool presale) internal{
purchaseCount += amount;
// Track total mints per address only if necessaryif (!transferLocked && ((presalePurchaseLimit >0&& presale) || purchaseLimit >0)) {
_mintCount[msg.sender] += amount;
}
_mintERC1155(to, amount);
}
/**
* @dev A _mint function is required that calls the underlying ERC1155 mint.
*/function_mintERC1155(address to, uint16 amount) internalvirtual;
/**
* Validate price (override for custom pricing mechanics)
*/function_validatePrice(uint16 amount) internal{
require(msg.value== amount * purchasePrice, "Invalid purchase amount sent");
}
/**
* Validate price (override for custom pricing mechanics)
*/function_validatePresalePrice(uint16 amount) internalvirtual{
require(msg.value== amount * presalePurchasePrice, "Invalid purchase amount sent");
}
/**
* If enabled, lock token transfers until after the sale has ended.
*
* This helps enforce purchase limits, so someone can't buy -> transfer -> buy again
* while the token is minting.
*/function_validateTokenTransferability(addressfrom) internalview{
require(!transferLocked || purchaseRemaining() ==0|| (active &&block.timestamp>= endTime) ||from==address(0), "Transfer locked until sale ends");
}
/**
* Set whether or not token transfers are locked till end of sale
*/function_setTransferLocked(bool locked) internal{
transferLocked = locked;
}
/**
* @dev See {IERC1155Collection-updateRoyalties}.
*/function_updateRoyalties(addresspayable recipient, uint256 bps) internal{
_royaltyRecipient = recipient;
_royaltyBps = bps;
}
}
Contract Source Code
File 9 of 19: ERC165.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)pragmasolidity ^0.8.0;import"./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/abstractcontractERC165isIERC165{
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverridereturns (bool) {
return interfaceId ==type(IERC165).interfaceId;
}
}
Contract Source Code
File 10 of 19: EnumerableSet.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/structs/EnumerableSet.sol)pragmasolidity ^0.8.0;/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/libraryEnumerableSet{
// To implement this library for multiple types with as little code// repetition as possible, we write it in terms of a generic Set type with// bytes32 values.// The Set implementation uses private functions, and user-facing// implementations (such as AddressSet) are just wrappers around the// underlying Set.// This means that we can only create new EnumerableSets for types that fit// in bytes32.structSet {
// Storage of set valuesbytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0// means a value is not in the set.mapping(bytes32=>uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/function_add(Set storage set, bytes32 value) privatereturns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
returntrue;
} else {
returnfalse;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/function_remove(Set storage set, bytes32 value) privatereturns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slotuint256 valueIndex = set._indexes[value];
if (valueIndex !=0) {
// Equivalent to contains(set, value)// To delete an element from the _values array in O(1), we swap the element to delete with the last one in// the array, and then remove the last element (sometimes called as 'swap and pop').// This modifies the order of the array, as noted in {at}.uint256 toDeleteIndex = valueIndex -1;
uint256 lastIndex = set._values.length-1;
if (lastIndex != toDeleteIndex) {
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slotdelete set._indexes[value];
returntrue;
} else {
returnfalse;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/function_contains(Set storage set, bytes32 value) privateviewreturns (bool) {
return set._indexes[value] !=0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/function_length(Set storage set) privateviewreturns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/function_at(Set storage set, uint256 index) privateviewreturns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/function_values(Set storage set) privateviewreturns (bytes32[] memory) {
return set._values;
}
// Bytes32SetstructBytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/functionadd(Bytes32Set storage set, bytes32 value) internalreturns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/functionremove(Bytes32Set storage set, bytes32 value) internalreturns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/functioncontains(Bytes32Set storage set, bytes32 value) internalviewreturns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/functionlength(Bytes32Set storage set) internalviewreturns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/functionat(Bytes32Set storage set, uint256 index) internalviewreturns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/functionvalues(Bytes32Set storage set) internalviewreturns (bytes32[] memory) {
return _values(set._inner);
}
// AddressSetstructAddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/functionadd(AddressSet storage set, address value) internalreturns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/functionremove(AddressSet storage set, address value) internalreturns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/functioncontains(AddressSet storage set, address value) internalviewreturns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/functionlength(AddressSet storage set) internalviewreturns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/functionat(AddressSet storage set, uint256 index) internalviewreturns (address) {
returnaddress(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/functionvalues(AddressSet storage set) internalviewreturns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
assembly {
result := store
}
return result;
}
// UintSetstructUintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/functionadd(UintSet storage set, uint256 value) internalreturns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/functionremove(UintSet storage set, uint256 value) internalreturns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/functioncontains(UintSet storage set, uint256 value) internalviewreturns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/functionlength(UintSet storage set) internalviewreturns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/functionat(UintSet storage set, uint256 index) internalviewreturns (uint256) {
returnuint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/functionvalues(UintSet storage set) internalviewreturns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
assembly {
result := store
}
return result;
}
}
Contract Source Code
File 11 of 19: IAdminControl.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/// @author: manifold.xyzimport"@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
* @dev Interface for admin control
*/interfaceIAdminControlisIERC165{
eventAdminApproved(addressindexed account, addressindexed sender);
eventAdminRevoked(addressindexed account, addressindexed sender);
/**
* @dev gets address of all admins
*/functiongetAdmins() externalviewreturns (address[] memory);
/**
* @dev add an admin. Can only be called by contract owner.
*/functionapproveAdmin(address admin) external;
/**
* @dev remove an admin. Can only be called by contract owner.
*/functionrevokeAdmin(address admin) external;
/**
* @dev checks whether or not given address is an admin
* Returns True if they are
*/functionisAdmin(address admin) externalviewreturns (bool);
}
Contract Source Code
File 12 of 19: ICollectionBase.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/// @author: manifold.xyz/**
* @dev Collection Interface
*/interfaceICollectionBase{
eventCollectionActivated(uint256 startTime, uint256 endTime, uint256 presaleInterval, uint256 claimStartTime, uint256 claimEndTime);
eventCollectionDeactivated();
/**
* @dev Check if nonce has been used
*/functionnonceUsed(stringmemory nonce) externalviewreturns(bool);
}
Contract Source Code
File 13 of 19: IERC1155.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155.sol)pragmasolidity ^0.8.0;import"../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/interfaceIERC1155isIERC165{
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/eventTransferSingle(addressindexed operator, addressindexedfrom, addressindexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/eventTransferBatch(addressindexed operator,
addressindexedfrom,
addressindexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/eventApprovalForAll(addressindexed account, addressindexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/eventURI(string value, uint256indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/functionbalanceOf(address account, uint256 id) externalviewreturns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/functionbalanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
externalviewreturns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/functionsetApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/functionisApprovedForAll(address account, address operator) externalviewreturns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 id,
uint256 amount,
bytescalldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/functionsafeBatchTransferFrom(addressfrom,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytescalldata data
) external;
}
Contract Source Code
File 14 of 19: IERC1155Collection.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;// @author: manifold.xyzimport"./ICollectionBase.sol";
/**
* @dev ERC1155 Collection Interface
*/interfaceIERC1155CollectionisICollectionBase{
structCollectionState {
uint16 transactionLimit;
uint16 purchaseMax;
uint16 purchaseRemaining;
uint256 purchasePrice;
uint16 purchaseLimit;
uint256 presalePurchasePrice;
uint16 presalePurchaseLimit;
uint16 purchaseCount;
bool active;
uint256 startTime;
uint256 endTime;
uint256 presaleInterval;
uint256 claimStartTime;
uint256 claimEndTime;
}
/**
* @dev Activates the contract.
* @param startTime_ The UNIX timestamp in seconds the sale should start at.
* @param duration The number of seconds the sale should remain active.
* @param presaleInterval_ The period of time the contract should only be active for presale.
*/functionactivate(uint256 startTime_, uint256 duration, uint256 presaleInterval_, uint256 claimStartTime_, uint256 claimEndTime_) external;
/**
* @dev Deactivate the contract
*/functiondeactivate() external;
/**
* @dev Pre-mint tokens to the owner. Sale must not be active.
* @param amount The number of tokens to mint.
*/functionpremint(uint16 amount) external;
/**
* @dev Pre-mint tokens to the list of addresses. Sale must not be active.
* @param amounts The amount of tokens to mint per address.
* @param addresses The list of addresses to mint a token to.
*/functionpremint(uint16[] calldata amounts, address[] calldata addresses) external;
/**
* @dev Claim - mint with validation.
* @param amount The number of tokens to mint.
* @param message Signed message to validate input args.
* @param signature Signature of the signer to recover from signed message.
* @param nonce Manifold-generated nonce.
*/functionclaim(uint16 amount, bytes32 message, bytescalldata signature, stringcalldata nonce) external;
/**
* @dev Purchase - mint with validation.
* @param amount The number of tokens to mint.
* @param message Signed message to validate input args.
* @param signature Signature of the signer to recover from signed message.
* @param nonce Manifold-generated nonce.
*/functionpurchase(uint16 amount, bytes32 message, bytescalldata signature, stringcalldata nonce) externalpayable;
/**
* @dev Mint reserve tokens to the owner. Sale must be complete.
* @param amount The number of tokens to mint.
*/functionmintReserve(uint16 amount) external;
/**
* @dev Mint reserve tokens to the list of addresses. Sale must be complete.
* @param amounts The amount of tokens to mint per address.
* @param addresses The list of addresses to mint a token to.
*/functionmintReserve(uint16[] calldata amounts, address[] calldata addresses) external;
/**
* @dev Set the URI for the metadata for the collection.
* @param uri The metadata URI.
*/functionsetCollectionURI(stringcalldata uri) external;
/**
* @dev returns the collection state
*/functionstate() externalviewreturns (CollectionState memory);
/**
* @dev Total amount of tokens remaining for the given token id.
*/functionpurchaseRemaining() externalviewreturns (uint16);
/**
* @dev Withdraw funds (requires contract admin).
* @param recipient The address to withdraw funds to
* @param amount The amount to withdraw
*/functionwithdraw(addresspayable recipient, uint256 amount) external;
/**
* @dev Set whether or not token transfers are locked until end of sale.
* @param locked Whether or not transfers are locked
*/functionsetTransferLocked(bool locked) external;
/**
* @dev Update royalties
* @param recipient The address to set as the royalty recipient
* @param bps The basis points to set as the royalty
*/functionupdateRoyalties(addresspayable recipient, uint256 bps) external;
/**
* @dev Get the current royalty recipient and amount
*/functiongetRoyalties(uint256) externalviewreturns (addresspayable recipient, uint256 bps);
/**
* @dev EIP-2981 compatibility to determine royalty info on sale
*/functionroyaltyInfo(uint256, uint256 salePrice) externalviewreturns (address receiver, uint256 royaltyAmount);
/**
* @dev Get balance of address. Similar to IERC1155-balanceOf, but doesn't require token ID
* @param owner The address to get the token balance of
*/functionbalanceOf(address owner) externalviewreturns (uint256);
/**
* @dev Destroys `amount` tokens from `from`
* @param from The address to remove tokens from
* @param amount The amount of tokens to remove
*/functionburn(addressfrom, uint16 amount) external;
}
Contract Source Code
File 15 of 19: IERC1155MetadataURI.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)pragmasolidity ^0.8.0;import"../IERC1155.sol";
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/interfaceIERC1155MetadataURIisIERC1155{
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/functionuri(uint256 id) externalviewreturns (stringmemory);
}
Contract Source Code
File 16 of 19: IERC1155Receiver.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155Receiver.sol)pragmasolidity ^0.8.0;import"../../utils/introspection/IERC165.sol";
/**
* @dev _Available since v3.1._
*/interfaceIERC1155ReceiverisIERC165{
/**
@dev Handles the receipt of a single ERC1155 token type. This function is
called at the end of a `safeTransferFrom` after the balance has been updated.
To accept the transfer, this must return
`bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
(i.e. 0xf23a6e61, or its own function selector).
@param operator The address which initiated the transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param id The ID of the token being transferred
@param value The amount of tokens being transferred
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/functiononERC1155Received(address operator,
addressfrom,
uint256 id,
uint256 value,
bytescalldata data
) externalreturns (bytes4);
/**
@dev Handles the receipt of a multiple ERC1155 token types. This function
is called at the end of a `safeBatchTransferFrom` after the balances have
been updated. To accept the transfer(s), this must return
`bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
(i.e. 0xbc197c81, or its own function selector).
@param operator The address which initiated the batch transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param ids An array containing ids of each token being transferred (order and length must match values array)
@param values An array containing amounts of each token being transferred (order and length must match ids array)
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/functiononERC1155BatchReceived(address operator,
addressfrom,
uint256[] calldata ids,
uint256[] calldata values,
bytescalldata data
) externalreturns (bytes4);
}
Contract Source Code
File 17 of 19: IERC165.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)pragmasolidity ^0.8.0;/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/interfaceIERC165{
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/functionsupportsInterface(bytes4 interfaceId) externalviewreturns (bool);
}
Contract Source Code
File 18 of 19: Ownable.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)pragmasolidity ^0.8.0;import"../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/abstractcontractOwnableisContext{
addressprivate _owner;
eventOwnershipTransferred(addressindexed previousOwner, addressindexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/functionowner() publicviewvirtualreturns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/modifieronlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/functionrenounceOwnership() publicvirtualonlyOwner{
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/functiontransferOwnership(address newOwner) publicvirtualonlyOwner{
require(newOwner !=address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/function_transferOwnership(address newOwner) internalvirtual{
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
Contract Source Code
File 19 of 19: Strings.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)pragmasolidity ^0.8.0;/**
* @dev String operations.
*/libraryStrings{
bytes16privateconstant _HEX_SYMBOLS ="0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/functiontoString(uint256 value) internalpurereturns (stringmemory) {
// Inspired by OraclizeAPI's implementation - MIT licence// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.solif (value ==0) {
return"0";
}
uint256 temp = value;
uint256 digits;
while (temp !=0) {
digits++;
temp /=10;
}
bytesmemory buffer =newbytes(digits);
while (value !=0) {
digits -=1;
buffer[digits] =bytes1(uint8(48+uint256(value %10)));
value /=10;
}
returnstring(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/functiontoHexString(uint256 value) internalpurereturns (stringmemory) {
if (value ==0) {
return"0x00";
}
uint256 temp = value;
uint256 length =0;
while (temp !=0) {
length++;
temp >>=8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/functiontoHexString(uint256 value, uint256 length) internalpurereturns (stringmemory) {
bytesmemory buffer =newbytes(2* length +2);
buffer[0] ="0";
buffer[1] ="x";
for (uint256 i =2* length +1; i >1; --i) {
buffer[i] = _HEX_SYMBOLS[value &0xf];
value >>=4;
}
require(value ==0, "Strings: hex length insufficient");
returnstring(buffer);
}
}