// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/**
* @dev Collection of functions related to the address type
*/libraryAddress{
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/functionisContract(address account) internalviewreturns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in// construction, since the code is only stored at the end of the// constructor execution.uint256 size;
// solhint-disable-next-line no-inline-assemblyassembly { size :=extcodesize(account) }
return size >0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/functionsendValue(addresspayable recipient, uint256 amount) internal{
require(address(this).balance>= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/functionfunctionCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCall(address target, bytesmemory data, stringmemory errorMessage) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target, bytesmemory data, uint256 value) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target, bytesmemory data, uint256 value, stringmemory errorMessage) internalreturns (bytesmemory) {
require(address(this).balance>= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytesmemory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target, bytesmemory data) internalviewreturns (bytesmemory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target, bytesmemory data, stringmemory errorMessage) internalviewreturns (bytesmemory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytesmemory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/functionfunctionDelegateCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/functionfunctionDelegateCall(address target, bytesmemory data, stringmemory errorMessage) internalreturns (bytesmemory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytesmemory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function_verifyCallResult(bool success, bytesmemory returndata, stringmemory errorMessage) privatepurereturns(bytesmemory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if presentif (returndata.length>0) {
// The easiest way to bubble the revert reason is using memory via assembly// solhint-disable-next-line no-inline-assemblyassembly {
let returndata_size :=mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
Contract Source Code
File 2 of 13: Context.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/abstractcontractContext{
function_msgSender() internalviewvirtualreturns (address) {
returnmsg.sender;
}
function_msgData() internalviewvirtualreturns (bytescalldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691returnmsg.data;
}
}
Contract Source Code
File 3 of 13: Dao_Robotto.sol
// SPDX-License-Identifier: GPL-3.0pragmasolidity ^0.8.0;import"./ERC721Enumerable.sol";
import"./Ownable.sol";
contractDaoRobottoisERC721Enumerable, Ownable{
usingStringsforuint256;
stringprivate _name;
stringprivate _symbol;
uint256internal MaxMintedtokenId =0;
stringpublic baseURI;
stringpublic baseExtension =".json";
uint256public cost =0.08ether;
uint256public maxSupply =1000;
uint256public maxMintAmount =20;
uint256public maxSupplyPerWallet =10000;
boolpublic paused =false;
uint256public NonOpenedTokenFromId =0;
boolpublic presale =true;
boolpublic whitelistedAndMint =true;
uint256public whitelistMinCost =0.08ether;
stringpublic presaleURI ="http://23.254.217.117:5555/Dao_Robotto/DefaultFile.json";
mapping(address=>bool) public whitelisted;
mapping(uint256=>string) public tokenPresaleURI;
mapping(uint256=>bool) public TokenSaleBlacklist;
boolpublic WhitelistOnlyFromOwner =true;
// address of Associated Contractsmapping(address=>bool) public AssociatedContracts;
uint256public FusionCost =0.0ether;
address Hito =0xe3577D975F1359dF3dd186Cf4D2bB73FFFC2074c; // Community Wallet address Seiiku =0x7A4CF0CE8170421f5cc70F1102fCA9F0fe2aa28D; // Project developmentaddress Kifu =0xa86BF12898Aea8Da994ba2903a86e5a9ee2F4232; // Team contributionconstructor(stringmemory _initBaseURI
) ERC721("Dao Robotto", "Dao Robotto") {
_symbol ="Dao Robotto";
_name ="Dao Robotto";
setBaseURI(_initBaseURI);
}
functiontransferFrom(addressfrom, address to, uint256 tokenId) publicvirtualoverride{
//solhint-disable-next-line max-line-lengthrequire(TokenSaleBlacklist[tokenId] ==false, "Token in the Blacklist...");
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner or approved");
_transfer(from, to, tokenId);
}
functionsafeTransferFrom(addressfrom, address to, uint256 tokenId, bytesmemory _data) publicvirtualoverride{
require(TokenSaleBlacklist[tokenId] ==false, "Token in the Blacklist...");
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner or approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @return the name of the token.
*/functionname() publicoverrideviewreturns (stringmemory) {
return _name;
}
/**
* @return the symbol of the token.
*/functionsymbol() publicoverrideviewreturns (stringmemory) {
return _symbol;
}
// internalfunction_baseURI() internalviewvirtualoverridereturns (stringmemory) {
return baseURI;
}
// publicfunctionmint(address _to, uint256 _mintAmount) publicpayable{
require(!paused);
require(_mintAmount >0);
require(MaxMintedtokenId + _mintAmount <= maxSupply);
if (msg.sender!= owner()) {
uint256 WalletTokenCount = balanceOf(_to);
require(WalletTokenCount + _mintAmount <= maxSupplyPerWallet);
if(whitelisted[msg.sender] ==true) {
require(_mintAmount <= maxMintAmount);
require(msg.value>= whitelistMinCost * _mintAmount);
}
else
{
require(_mintAmount <= maxMintAmount);
require(msg.value>= cost * _mintAmount);
}
}
for (uint256 i =1; i <= _mintAmount; i++) {
_safeMint(_to, MaxMintedtokenId +1);
MaxMintedtokenId++;
tokenPresaleURI[MaxMintedtokenId] = presaleURI;
}
}
functionmintWithwhitelisted(address _to, uint256 _mintAmount) publicpayable{
if(whitelistedAndMint ==true)
whitelisted[msg.sender] =true;
mint(_to, _mintAmount);
}
functionwalletOfOwner(address _owner)
publicviewreturns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds =newuint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
functiontokenURI(uint256 tokenId)
publicviewvirtualoverridereturns (stringmemory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(presale){
return tokenPresaleURI[tokenId];
}
elseif(NonOpenedTokenFromId >0&& NonOpenedTokenFromId < tokenId){
return tokenPresaleURI[tokenId];
}
else
{
stringmemory currentBaseURI = _baseURI();
returnbytes(currentBaseURI).length>0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
}
//Burn and Fusion Functionsfunctionburn(uint256 tokenId) publicpayable{
if (msg.sender!= owner()) {
require(_isApprovedOrOwner(_msgSender(), tokenId) || AssociatedContracts[_msgSender()] ==true, "Fusion: caller is not owner or approved");
}
_burn(tokenId);
}
functionExternalFusion(uint256 tokenId, uint256 AttributeID) publicpayable{
if (msg.sender!= owner()) {
require(_isApprovedOrOwner(_msgSender(), tokenId) || AssociatedContracts[_msgSender()] ==true, "Fusion: caller is not owner or approved");
}
}
functionFusion(uint256 tokenId, uint256 AttributeID) publicpayable{
if (msg.sender!= owner()) {
require(_isApprovedOrOwner(_msgSender(), tokenId), "Fusion: caller is not owner or approved");
require(_isApprovedOrOwner(_msgSender(), AttributeID), "Fusion: caller is not owner or approved");
require(msg.value>= FusionCost);
}
elseif (msg.sender== owner()){
address tokrnOwner = ownerOf(tokenId);
address AttributeOwner = ownerOf(AttributeID);
require(tokrnOwner == AttributeOwner);
}
burn(AttributeID);
}
functionFusion(uint256 tokenId, uint256 Attribute1ID, uint256 Attribute2ID) publicpayable{
if (msg.sender!= owner()) {
require(_isApprovedOrOwner(_msgSender(), tokenId), "Fusion: caller is not owner or approved");
require(_isApprovedOrOwner(_msgSender(), Attribute1ID), "Fusion: caller is not owner or approved");
require(_isApprovedOrOwner(_msgSender(), Attribute2ID), "Fusion: caller is not owner or approved");
require(msg.value>= FusionCost);
}
elseif (msg.sender== owner()){
address tokrnOwner = ownerOf(tokenId);
address Attribute1Owner = ownerOf(Attribute1ID);
address Attribute2Owner = ownerOf(Attribute2ID);
require(tokrnOwner == Attribute1Owner && tokrnOwner == Attribute2Owner);
}
burn(Attribute1ID);
burn(Attribute2ID);
}
functionAssociatedFunktion(address Contract, uint256 tokenId, uint256 AttributeID) publicpayable{
require(AssociatedContracts[Contract] ==true, "Contract is not available");
if (msg.sender!= owner()) {
require(_isApprovedOrOwner(_msgSender(), tokenId), "Fusion: caller is not owner or approved (TokenID)");
address ContractAttributeIDOwner = ERC721(Contract).ownerOf(AttributeID);
require(_msgSender() == ContractAttributeIDOwner, "Fusion: caller is not owner or approved (AttributeID)");
require(msg.value>= FusionCost);
}
DaoRobotto(payable(Contract)).AssociatedFunktion(address(this), tokenId, AttributeID);
}
//only ownerfunctionsetBlackList(uint256[] memory newTokenSaleBlacklist) publiconlyOwner() {
for (uint256 i; i < MaxMintedtokenId+1; i++) {
TokenSaleBlacklist[i] =false;
}
for (uint256 i; i < newTokenSaleBlacklist.length+1; i++) {
TokenSaleBlacklist[newTokenSaleBlacklist[i]] =true;
}
}
functionsetName(stringmemory _newName) publiconlyOwner() {
_name = _newName;
}
functionsetSymbol(stringmemory newSymbol) publiconlyOwner() {
_symbol = newSymbol;
}
functionsetCost(uint256 _newCost) publiconlyOwner() {
cost = _newCost;
}
functionsetwhitelistMinCost(uint256 _newCost) publiconlyOwner() {
whitelistMinCost = _newCost;
}
functionsetFusionCost(uint256 _newCost) publiconlyOwner() {
FusionCost = _newCost;
}
functionsetmaxSupply(uint256 _newMaxSupply) publiconlyOwner() {
maxSupply = _newMaxSupply;
}
functionsetNonOpenedTokenFromId(uint256 _newNonOpenedTokenFromId) publiconlyOwner() {
NonOpenedTokenFromId = _newNonOpenedTokenFromId;
}
functionsetmaxMintAmount(uint256 _newmaxMintAmount) publiconlyOwner() {
maxMintAmount = _newmaxMintAmount;
}
functionsetmaxSupplyPerWallet(uint256 _newmaxSupplyPerWallet) publiconlyOwner() {
maxSupplyPerWallet = _newmaxSupplyPerWallet;
}
functionsetBaseURI(stringmemory _newBaseURI) publiconlyOwner{
baseURI = _newBaseURI;
}
functionsetpresaleURI(stringmemory _newPresaleURI) publiconlyOwner{
presaleURI = _newPresaleURI;
}
functionsetTokenPresaleURI(uint256 TokenId, stringmemory _newPresaleURI) publiconlyOwner{
tokenPresaleURI[TokenId] = _newPresaleURI;
}
functionsetBaseExtension(stringmemory _newBaseExtension) publiconlyOwner{
baseExtension = _newBaseExtension;
}
functionpause(bool _state) publiconlyOwner{
paused = _state;
}
functionsetpresale(bool _state) publiconlyOwner{
presale = _state;
}
functionwhitelistUser(address _user) public{
if(WhitelistOnlyFromOwner ==true)
require(msg.sender== owner());
elseif(msg.sender!= owner())
require(msg.sender== _user);
whitelisted[_user] =true;
}
functionremoveWhitelistUser(address _user) public{
if(WhitelistOnlyFromOwner ==true)
require(msg.sender== owner());
elseif(msg.sender!= owner())
require(msg.sender== _user);
whitelisted[_user] =false;
}
functionAddAssociatedContracts(address Contract) publiconlyOwner{
require(msg.sender== owner());
AssociatedContracts[Contract] =true;
}
functionremoveAssociatedContracts(address Contract) publiconlyOwner{
require(msg.sender== owner());
AssociatedContracts[Contract] =false;
}
functionsetwhitelistedAndMint(bool _state) publiconlyOwner{
whitelistedAndMint = _state;
}
functionsetWhitelistOnlyFromOwner(bool _state) publiconlyOwner{
WhitelistOnlyFromOwner = _state;
}
receive () externalpayable{
}
functionwithdraw() publiconlyOwner{
uint bal =address(this).balance;
uint _1_Percent = bal /100 ; // 1/100 = 1%uint _33_ = _1_Percent *33;
uint _34_ = _1_Percent *34;
require(payable(Hito).send(_34_));
require(payable(Seiiku).send(_33_));
require(payable(Kifu).send(_33_));
}
}
Contract Source Code
File 4 of 13: ERC165.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/abstractcontractERC165isIERC165{
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverridereturns (bool) {
return interfaceId ==type(IERC165).interfaceId;
}
}
Contract Source Code
File 5 of 13: ERC721.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"./IERC721.sol";
import"./IERC721Receiver.sol";
import"./IERC721Metadata.sol";
import"./Address.sol";
import"./Context.sol";
import"./Strings.sol";
import"./ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/contractERC721isContext, ERC165, IERC721, IERC721Metadata{
usingAddressforaddress;
usingStringsforuint256;
// Token namestringprivate _name;
// Token symbolstringprivate _symbol;
// Mapping from token ID to owner addressmapping (uint256=>address) private _owners;
// Mapping owner address to token countmapping (address=>uint256) private _balances;
// Mapping from token ID to approved addressmapping (uint256=>address) private _tokenApprovals;
// Mapping from owner to operator approvalsmapping (address=>mapping (address=>bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/constructor (stringmemory name_, stringmemory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverride(ERC165, IERC165) returns (bool) {
return interfaceId ==type(IERC721).interfaceId|| interfaceId ==type(IERC721Metadata).interfaceId||super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/functionbalanceOf(address owner) publicviewvirtualoverridereturns (uint256) {
require(owner !=address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/functionownerOf(uint256 tokenId) publicviewvirtualoverridereturns (address) {
address owner = _owners[tokenId];
require(owner !=address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/functionname() publicviewvirtualoverridereturns (stringmemory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/functionsymbol() publicviewvirtualoverridereturns (stringmemory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/functiontokenURI(uint256 tokenId) publicviewvirtualoverridereturns (stringmemory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
stringmemory baseURI = _baseURI();
returnbytes(baseURI).length>0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: '';
}
/**
* @dev Base URI for computing {tokenURI}. Empty by default, can be overriden
* in child contracts.
*/function_baseURI() internalviewvirtualreturns (stringmemory) {
return"";
}
/**
* @dev See {IERC721-approve}.
*/functionapprove(address to, uint256 tokenId) publicvirtualoverride{
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/functiongetApproved(uint256 tokenId) publicviewvirtualoverridereturns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/functionsetApprovalForAll(address operator, bool approved) publicvirtualoverride{
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/functionisApprovedForAll(address owner, address operator) publicviewvirtualoverridereturns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/functiontransferFrom(addressfrom, address to, uint256 tokenId) publicvirtualoverride{
//solhint-disable-next-line max-line-lengthrequire(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/functionsafeTransferFrom(addressfrom, address to, uint256 tokenId) publicvirtualoverride{
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/functionsafeTransferFrom(addressfrom, address to, uint256 tokenId, bytesmemory _data) publicvirtualoverride{
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/function_safeTransfer(addressfrom, address to, uint256 tokenId, bytesmemory _data) internalvirtual{
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/function_exists(uint256 tokenId) internalviewvirtualreturns (bool) {
return _owners[tokenId] !=address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/function_isApprovedOrOwner(address spender, uint256 tokenId) internalviewvirtualreturns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/function_safeMint(address to, uint256 tokenId) internalvirtual{
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/function_safeMint(address to, uint256 tokenId, bytesmemory _data) internalvirtual{
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/function_mint(address to, uint256 tokenId) internalvirtual{
require(to !=address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] +=1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/function_burn(uint256 tokenId) internalvirtual{
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -=1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/function_transfer(addressfrom, address to, uint256 tokenId) internalvirtual{
require(ERC721.ownerOf(tokenId) ==from, "ERC721: transfer of token that is not own");
require(to !=address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -=1;
_balances[to] +=1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/function_approve(address to, uint256 tokenId) internalvirtual{
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/function_checkOnERC721Received(addressfrom, address to, uint256 tokenId, bytesmemory _data)
privatereturns (bool)
{
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytesmemory reason) {
if (reason.length==0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
// solhint-disable-next-line no-inline-assemblyassembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
returntrue;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/function_beforeTokenTransfer(addressfrom, address to, uint256 tokenId) internalvirtual{ }
}
Contract Source Code
File 6 of 13: ERC721Enumerable.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"../ERC721.sol";
import"./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/abstractcontractERC721EnumerableisERC721, IERC721Enumerable{
// Mapping from owner to list of owned token IDsmapping(address=>mapping(uint256=>uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens listmapping(uint256=>uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumerationuint256[] private _allTokens;
// Mapping from token id to position in the allTokens arraymapping(uint256=>uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverride(IERC165, ERC721) returns (bool) {
return interfaceId ==type(IERC721Enumerable).interfaceId||super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/functiontokenOfOwnerByIndex(address owner, uint256 index) publicviewvirtualoverridereturns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/functiontotalSupply() publicviewvirtualoverridereturns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/functiontokenByIndex(uint256 index) publicviewvirtualoverridereturns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/function_beforeTokenTransfer(addressfrom, address to, uint256 tokenId) internalvirtualoverride{
super._beforeTokenTransfer(from, to, tokenId);
if (from==address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} elseif (from!= to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to ==address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} elseif (to !=from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/function_addTokenToOwnerEnumeration(address to, uint256 tokenId) private{
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/function_addTokenToAllTokensEnumeration(uint256 tokenId) private{
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/function_removeTokenFromOwnerEnumeration(addressfrom, uint256 tokenId) private{
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and// then delete the last slot (swap and pop).uint256 lastTokenIndex = ERC721.balanceOf(from) -1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessaryif (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the arraydelete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/function_removeTokenFromAllTokensEnumeration(uint256 tokenId) private{
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and// then delete the last slot (swap and pop).uint256 lastTokenIndex = _allTokens.length-1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding// an 'if' statement (like in _removeTokenFromOwnerEnumeration)uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index// This also deletes the contents at the last position of the arraydelete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
Contract Source Code
File 7 of 13: IERC165.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/interfaceIERC165{
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/functionsupportsInterface(bytes4 interfaceId) externalviewreturns (bool);
}
Contract Source Code
File 8 of 13: IERC721.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"./IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/interfaceIERC721isIERC165{
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/eventTransfer(addressindexedfrom, addressindexed to, uint256indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/eventApproval(addressindexed owner, addressindexed approved, uint256indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/eventApprovalForAll(addressindexed owner, addressindexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/functionbalanceOf(address owner) externalviewreturns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/functionownerOf(uint256 tokenId) externalviewreturns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/functionsafeTransferFrom(addressfrom, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/functiontransferFrom(addressfrom, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/functionapprove(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/functiongetApproved(uint256 tokenId) externalviewreturns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/functionsetApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/functionisApprovedForAll(address owner, address operator) externalviewreturns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/functionsafeTransferFrom(addressfrom, address to, uint256 tokenId, bytescalldata data) external;
}
Contract Source Code
File 9 of 13: IERC721Enumerable.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/interfaceIERC721EnumerableisIERC721{
/**
* @dev Returns the total amount of tokens stored by the contract.
*/functiontotalSupply() externalviewreturns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/functiontokenOfOwnerByIndex(address owner, uint256 index) externalviewreturns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/functiontokenByIndex(uint256 index) externalviewreturns (uint256);
}
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/interfaceIERC721Receiver{
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/functiononERC721Received(address operator, addressfrom, uint256 tokenId, bytescalldata data) externalreturns (bytes4);
}
Contract Source Code
File 12 of 13: Ownable.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"./Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/abstractcontractOwnableisContext{
addressprivate _owner;
eventOwnershipTransferred(addressindexed previousOwner, addressindexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/functionowner() publicviewvirtualreturns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/modifieronlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/functionrenounceOwnership() publicvirtualonlyOwner{
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/functiontransferOwnership(address newOwner) publicvirtualonlyOwner{
require(newOwner !=address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function_setOwner(address newOwner) private{
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
Contract Source Code
File 13 of 13: Strings.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/**
* @dev String operations.
*/libraryStrings{
bytes16privateconstant _HEX_SYMBOLS ="0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/functiontoString(uint256 value) internalpurereturns (stringmemory) {
// Inspired by OraclizeAPI's implementation - MIT licence// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.solif (value ==0) {
return"0";
}
uint256 temp = value;
uint256 digits;
while (temp !=0) {
digits++;
temp /=10;
}
bytesmemory buffer =newbytes(digits);
while (value !=0) {
digits -=1;
buffer[digits] =bytes1(uint8(48+uint256(value %10)));
value /=10;
}
returnstring(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/functiontoHexString(uint256 value) internalpurereturns (stringmemory) {
if (value ==0) {
return"0x00";
}
uint256 temp = value;
uint256 length =0;
while (temp !=0) {
length++;
temp >>=8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/functiontoHexString(uint256 value, uint256 length) internalpurereturns (stringmemory) {
bytesmemory buffer =newbytes(2* length +2);
buffer[0] ="0";
buffer[1] ="x";
for (uint256 i =2* length +1; i >1; --i) {
buffer[i] = _HEX_SYMBOLS[value &0xf];
value >>=4;
}
require(value ==0, "Strings: hex length insufficient");
returnstring(buffer);
}
}