pragma solidity ^0.5.11;


contract Context {
    // Empty internal constructor, to prevent people from mistakenly deploying
    // an instance of this contract, which should be used via inheritance.
    constructor () internal { }
    // solhint-disable-previous-line no-empty-blocks

    function _msgSender() internal view returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

contract IERC721 is IERC165 {
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of NFTs in `owner`'s account.
     */
    function balanceOf(address owner) public view returns (uint256 balance);

    /**
     * @dev Returns the owner of the NFT specified by `tokenId`.
     */
    function ownerOf(uint256 tokenId) public view returns (address owner);

    /**
     * @dev Transfers a specific NFT (`tokenId`) from one account (`from`) to
     * another (`to`).
     *
     *
     *
     * Requirements:
     * - `from`, `to` cannot be zero.
     * - `tokenId` must be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this
     * NFT by either {approve} or {setApprovalForAll}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public;
    /**
     * @dev Transfers a specific NFT (`tokenId`) from one account (`from`) to
     * another (`to`).
     *
     * Requirements:
     * - If the caller is not `from`, it must be approved to move this NFT by
     * either {approve} or {setApprovalForAll}.
     */
    function transferFrom(address from, address to, uint256 tokenId) public;
    function approve(address to, uint256 tokenId) public;
    function getApproved(uint256 tokenId) public view returns (address operator);

    function setApprovalForAll(address operator, bool _approved) public;
    function isApprovedForAll(address owner, address operator) public view returns (bool);


    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public;
}

contract IERC721Receiver {
    /**
     * @notice Handle the receipt of an NFT
     * @dev The ERC721 smart contract calls this function on the recipient
     * after a {IERC721-safeTransferFrom}. This function MUST return the function selector,
     * otherwise the caller will revert the transaction. The selector to be
     * returned can be obtained as `this.onERC721Received.selector`. This
     * function MAY throw to revert and reject the transfer.
     * Note: the ERC721 contract address is always the message sender.
     * @param operator The address which called `safeTransferFrom` function
     * @param from The address which previously owned the token
     * @param tokenId The NFT identifier which is being transferred
     * @param data Additional data with no specified format
     * @return bytes4 `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
     */
    function onERC721Received(address operator, address from, uint256 tokenId, bytes memory data)
    public returns (bytes4);
}

library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     *
     * _Available since v2.4.0._
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     *
     * _Available since v2.4.0._
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     *
     * _Available since v2.4.0._
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * This test is non-exhaustive, and there may be false-negatives: during the
     * execution of a contract's constructor, its address will be reported as
     * not containing a contract.
     *
     * IMPORTANT: It is unsafe to assume that an address for which this
     * function returns false is an externally-owned account (EOA) and not a
     * contract.
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != 0x0 && codehash != accountHash);
    }

    /**
     * @dev Converts an `address` into `address payable`. Note that this is
     * simply a type cast: the actual underlying value is not changed.
     *
     * _Available since v2.4.0._
     */
    function toPayable(address account) internal pure returns (address payable) {
        return address(uint160(account));
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     *
     * _Available since v2.4.0._
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-call-value
        (bool success, ) = recipient.call.value(amount)("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
}

library Counters {
    using SafeMath for uint256;

    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        counter._value += 1;
    }

    function decrement(Counter storage counter) internal {
        counter._value = counter._value.sub(1);
    }
}

contract ERC165 is IERC165 {
    /*
     * bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
     */
    bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;

    /**
     * @dev Mapping of interface ids to whether or not it's supported.
     */
    mapping(bytes4 => bool) private _supportedInterfaces;

    constructor () internal {
        // Derived contracts need only register support for their own interfaces,
        // we register support for ERC165 itself here
        _registerInterface(_INTERFACE_ID_ERC165);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     *
     * Time complexity O(1), guaranteed to always use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool) {
        return _supportedInterfaces[interfaceId];
    }

    /**
     * @dev Registers the contract as an implementer of the interface defined by
     * `interfaceId`. Support of the actual ERC165 interface is automatic and
     * registering its interface id is not required.
     *
     * See {IERC165-supportsInterface}.
     *
     * Requirements:
     *
     * - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
     */
    function _registerInterface(bytes4 interfaceId) internal {
        require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
        _supportedInterfaces[interfaceId] = true;
    }
}

contract ERC721 is Context, ERC165, IERC721 {
    using SafeMath for uint256;
    using Address for address;
    using Counters for Counters.Counter;

    // Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
    // which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
    bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;

    // Mapping from token ID to owner
    mapping (uint256 => address) private _tokenOwner;

    // Mapping from token ID to approved address
    mapping (uint256 => address) private _tokenApprovals;

    // Mapping from owner to number of owned token
    mapping (address => Counters.Counter) private _ownedTokensCount;

    // Mapping from owner to operator approvals
    mapping (address => mapping (address => bool)) private _operatorApprovals;

    /*
     *     bytes4(keccak256('balanceOf(address)')) == 0x70a08231
     *     bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
     *     bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
     *     bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
     *     bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
     *     bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
     *     bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
     *     bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
     *     bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
     *
     *     => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
     *        0xa22cb465 ^ 0xe985e9c ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
     */
    bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;

    constructor () public {
        // register the supported interfaces to conform to ERC721 via ERC165
        _registerInterface(_INTERFACE_ID_ERC721);
    }

    /**
     * @dev Gets the balance of the specified address.
     * @param owner address to query the balance of
     * @return uint256 representing the amount owned by the passed address
     */
    function balanceOf(address owner) public view returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");

        return _ownedTokensCount[owner].current();
    }

    /**
     * @dev Gets the owner of the specified token ID.
     * @param tokenId uint256 ID of the token to query the owner of
     * @return address currently marked as the owner of the given token ID
     */
    function ownerOf(uint256 tokenId) public view returns (address) {
        address owner = _tokenOwner[tokenId];
        require(owner != address(0), "ERC721: owner query for nonexistent token");

        return owner;
    }

    /**
     * @dev Approves another address to transfer the given token ID
     * The zero address indicates there is no approved address.
     * There can only be one approved address per token at a given time.
     * Can only be called by the token owner or an approved operator.
     * @param to address to be approved for the given token ID
     * @param tokenId uint256 ID of the token to be approved
     */
    function approve(address to, uint256 tokenId) public {
        address owner = ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not owner nor approved for all"
        );

        _tokenApprovals[tokenId] = to;
        emit Approval(owner, to, tokenId);
    }

    /**
     * @dev Gets the approved address for a token ID, or zero if no address set
     * Reverts if the token ID does not exist.
     * @param tokenId uint256 ID of the token to query the approval of
     * @return address currently approved for the given token ID
     */
    function getApproved(uint256 tokenId) public view returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev Sets or unsets the approval of a given operator
     * An operator is allowed to transfer all tokens of the sender on their behalf.
     * @param to operator address to set the approval
     * @param approved representing the status of the approval to be set
     */
    function setApprovalForAll(address to, bool approved) public {
        require(to != _msgSender(), "ERC721: approve to caller");

        _operatorApprovals[_msgSender()][to] = approved;
        emit ApprovalForAll(_msgSender(), to, approved);
    }

    /**
     * @dev Tells whether an operator is approved by a given owner.
     * @param owner owner address which you want to query the approval of
     * @param operator operator address which you want to query the approval of
     * @return bool whether the given operator is approved by the given owner
     */
    function isApprovedForAll(address owner, address operator) public view returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev Transfers the ownership of a given token ID to another address.
     * Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     * Requires the msg.sender to be the owner, approved, or operator.
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     */
    function transferFrom(address from, address to, uint256 tokenId) public {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");

        _transferFrom(from, to, tokenId);
    }

    /**
     * @dev Safely transfers the ownership of a given token ID to another address
     * If the target address is a contract, it must implement {IERC721Receiver-onERC721Received},
     * which is called upon a safe transfer, and return the magic value
     * `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
     * the transfer is reverted.
     * Requires the msg.sender to be the owner, approved, or operator
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev Safely transfers the ownership of a given token ID to another address
     * If the target address is a contract, it must implement {IERC721Receiver-onERC721Received},
     * which is called upon a safe transfer, and return the magic value
     * `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
     * the transfer is reverted.
     * Requires the _msgSender() to be the owner, approved, or operator
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes data to send along with a safe transfer check
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _safeTransferFrom(from, to, tokenId, _data);
    }

    /**
     * @dev Safely transfers the ownership of a given token ID to another address
     * If the target address is a contract, it must implement `onERC721Received`,
     * which is called upon a safe transfer, and return the magic value
     * `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
     * the transfer is reverted.
     * Requires the msg.sender to be the owner, approved, or operator
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes data to send along with a safe transfer check
     */
    function _safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) internal {
        _transferFrom(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns whether the specified token exists.
     * @param tokenId uint256 ID of the token to query the existence of
     * @return bool whether the token exists
     */
    function _exists(uint256 tokenId) internal view returns (bool) {
        address owner = _tokenOwner[tokenId];
        return owner != address(0);
    }

    /**
     * @dev Returns whether the given spender can transfer a given token ID.
     * @param spender address of the spender to query
     * @param tokenId uint256 ID of the token to be transferred
     * @return bool whether the msg.sender is approved for the given token ID,
     * is an operator of the owner, or is the owner of the token
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
    }

    /**
     * @dev Internal function to safely mint a new token.
     * Reverts if the given token ID already exists.
     * If the target address is a contract, it must implement `onERC721Received`,
     * which is called upon a safe transfer, and return the magic value
     * `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
     * the transfer is reverted.
     * @param to The address that will own the minted token
     * @param tokenId uint256 ID of the token to be minted
     */
    function _safeMint(address to, uint256 tokenId) internal {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Internal function to safely mint a new token.
     * Reverts if the given token ID already exists.
     * If the target address is a contract, it must implement `onERC721Received`,
     * which is called upon a safe transfer, and return the magic value
     * `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
     * the transfer is reverted.
     * @param to The address that will own the minted token
     * @param tokenId uint256 ID of the token to be minted
     * @param _data bytes data to send along with a safe transfer check
     */
    function _safeMint(address to, uint256 tokenId, bytes memory _data) internal {
        _mint(to, tokenId);
        require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Internal function to mint a new token.
     * Reverts if the given token ID already exists.
     * @param to The address that will own the minted token
     * @param tokenId uint256 ID of the token to be minted
     */
    function _mint(address to, uint256 tokenId) internal {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _tokenOwner[tokenId] = to;
        _ownedTokensCount[to].increment();

        emit Transfer(address(0), to, tokenId);
    }

    /**
     * @dev Internal function to burn a specific token.
     * Reverts if the token does not exist.
     * Deprecated, use {_burn} instead.
     * @param owner owner of the token to burn
     * @param tokenId uint256 ID of the token being burned
     */
    function _burn(address owner, uint256 tokenId) internal {
        require(ownerOf(tokenId) == owner, "ERC721: burn of token that is not own");

        _clearApproval(tokenId);

        _ownedTokensCount[owner].decrement();
        _tokenOwner[tokenId] = address(0);

        emit Transfer(owner, address(0), tokenId);
    }

    /**
     * @dev Internal function to burn a specific token.
     * Reverts if the token does not exist.
     * @param tokenId uint256 ID of the token being burned
     */
    function _burn(uint256 tokenId) internal {
        _burn(ownerOf(tokenId), tokenId);
    }

    /**
     * @dev Internal function to transfer ownership of a given token ID to another address.
     * As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     */
    function _transferFrom(address from, address to, uint256 tokenId) internal {
        require(ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
        require(to != address(0), "ERC721: transfer to the zero address");

        _clearApproval(tokenId);

        _ownedTokensCount[from].decrement();
        _ownedTokensCount[to].increment();

        _tokenOwner[tokenId] = to;

        emit Transfer(from, to, tokenId);
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * This function is deprecated.
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
        internal returns (bool)
    {
        if (!to.isContract()) {
            return true;
        }

        bytes4 retval = IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data);
        return (retval == _ERC721_RECEIVED);
    }

    /**
     * @dev Private function to clear current approval of a given token ID.
     * @param tokenId uint256 ID of the token to be transferred
     */
    function _clearApproval(uint256 tokenId) private {
        if (_tokenApprovals[tokenId] != address(0)) {
            _tokenApprovals[tokenId] = address(0);
        }
    }
}

contract IERC721Enumerable is IERC721 {
    function totalSupply() public view returns (uint256);
    function tokenOfOwnerByIndex(address owner, uint256 index) public view returns (uint256 tokenId);

    function tokenByIndex(uint256 index) public view returns (uint256);
}

contract ERC721Enumerable is Context, ERC165, ERC721, IERC721Enumerable {
    // Mapping from owner to list of owned token IDs
    mapping(address => uint256[]) private _ownedTokens;

    // Mapping from token ID to index of the owner tokens list
    mapping(uint256 => uint256) private _ownedTokensIndex;

    // Array with all token ids, used for enumeration
    uint256[] private _allTokens;

    // Mapping from token id to position in the allTokens array
    mapping(uint256 => uint256) private _allTokensIndex;

    /*
     *     bytes4(keccak256('totalSupply()')) == 0x18160ddd
     *     bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
     *     bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
     *
     *     => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
     */
    bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;

    /**
     * @dev Constructor function.
     */
    constructor () public {
        // register the supported interface to conform to ERC721Enumerable via ERC165
        _registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
    }

    /**
     * @dev Gets the token ID at a given index of the tokens list of the requested owner.
     * @param owner address owning the tokens list to be accessed
     * @param index uint256 representing the index to be accessed of the requested tokens list
     * @return uint256 token ID at the given index of the tokens list owned by the requested address
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) public view returns (uint256) {
        require(index < balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
        return _ownedTokens[owner][index];
    }

    /**
     * @dev Gets the total amount of tokens stored by the contract.
     * @return uint256 representing the total amount of tokens
     */
    function totalSupply() public view returns (uint256) {
        return _allTokens.length;
    }

    /**
     * @dev Gets the token ID at a given index of all the tokens in this contract
     * Reverts if the index is greater or equal to the total number of tokens.
     * @param index uint256 representing the index to be accessed of the tokens list
     * @return uint256 token ID at the given index of the tokens list
     */
    function tokenByIndex(uint256 index) public view returns (uint256) {
        require(index < totalSupply(), "ERC721Enumerable: global index out of bounds");
        return _allTokens[index];
    }

    /**
     * @dev Internal function to transfer ownership of a given token ID to another address.
     * As opposed to transferFrom, this imposes no restrictions on msg.sender.
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     */
    function _transferFrom(address from, address to, uint256 tokenId) internal {
        super._transferFrom(from, to, tokenId);

        _removeTokenFromOwnerEnumeration(from, tokenId);

        _addTokenToOwnerEnumeration(to, tokenId);
    }

    /**
     * @dev Internal function to mint a new token.
     * Reverts if the given token ID already exists.
     * @param to address the beneficiary that will own the minted token
     * @param tokenId uint256 ID of the token to be minted
     */
    function _mint(address to, uint256 tokenId) internal {
        super._mint(to, tokenId);

        _addTokenToOwnerEnumeration(to, tokenId);

        _addTokenToAllTokensEnumeration(tokenId);
    }

    /**
     * @dev Internal function to burn a specific token.
     * Reverts if the token does not exist.
     * Deprecated, use {ERC721-_burn} instead.
     * @param owner owner of the token to burn
     * @param tokenId uint256 ID of the token being burned
     */
    function _burn(address owner, uint256 tokenId) internal {
        super._burn(owner, tokenId);

        _removeTokenFromOwnerEnumeration(owner, tokenId);
        // Since tokenId will be deleted, we can clear its slot in _ownedTokensIndex to trigger a gas refund
        _ownedTokensIndex[tokenId] = 0;

        _removeTokenFromAllTokensEnumeration(tokenId);
    }

    /**
     * @dev Gets the list of token IDs of the requested owner.
     * @param owner address owning the tokens
     * @return uint256[] List of token IDs owned by the requested address
     */
    function _tokensOfOwner(address owner) internal view returns (uint256[] storage) {
        return _ownedTokens[owner];
    }

    /**
     * @dev Private function to add a token to this extension's ownership-tracking data structures.
     * @param to address representing the new owner of the given token ID
     * @param tokenId uint256 ID of the token to be added to the tokens list of the given address
     */
    function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
        _ownedTokensIndex[tokenId] = _ownedTokens[to].length;
        _ownedTokens[to].push(tokenId);
    }

    /**
     * @dev Private function to add a token to this extension's token tracking data structures.
     * @param tokenId uint256 ID of the token to be added to the tokens list
     */
    function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
        _allTokensIndex[tokenId] = _allTokens.length;
        _allTokens.push(tokenId);
    }

    /**
     * @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
     * while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
     * gas optimizations e.g. when performing a transfer operation (avoiding double writes).
     * This has O(1) time complexity, but alters the order of the _ownedTokens array.
     * @param from address representing the previous owner of the given token ID
     * @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
     */
    function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
        // To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).

        uint256 lastTokenIndex = _ownedTokens[from].length.sub(1);
        uint256 tokenIndex = _ownedTokensIndex[tokenId];

        // When the token to delete is the last token, the swap operation is unnecessary
        if (tokenIndex != lastTokenIndex) {
            uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];

            _ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
            _ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
        }

        // This also deletes the contents at the last position of the array
        _ownedTokens[from].length--;

        // Note that _ownedTokensIndex[tokenId] hasn't been cleared: it still points to the old slot (now occupied by
        // lastTokenId, or just over the end of the array if the token was the last one).
    }

    /**
     * @dev Private function to remove a token from this extension's token tracking data structures.
     * This has O(1) time complexity, but alters the order of the _allTokens array.
     * @param tokenId uint256 ID of the token to be removed from the tokens list
     */
    function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
        // To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).

        uint256 lastTokenIndex = _allTokens.length.sub(1);
        uint256 tokenIndex = _allTokensIndex[tokenId];

        // When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
        // rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
        // an 'if' statement (like in _removeTokenFromOwnerEnumeration)
        uint256 lastTokenId = _allTokens[lastTokenIndex];

        _allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
        _allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index

        // This also deletes the contents at the last position of the array
        _allTokens.length--;
        _allTokensIndex[tokenId] = 0;
    }
}

contract IERC721Metadata is IERC721 {
    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

contract ERC721Metadata is Context, ERC165, ERC721, IERC721Metadata {
    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Optional mapping for token URIs
    mapping(uint256 => string) private _tokenURIs;

    /*
     *     bytes4(keccak256('name()')) == 0x06fdde03
     *     bytes4(keccak256('symbol()')) == 0x95d89b41
     *     bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
     *
     *     => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
     */
    bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;

    /**
     * @dev Constructor function
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;

        // register the supported interfaces to conform to ERC721 via ERC165
        _registerInterface(_INTERFACE_ID_ERC721_METADATA);
    }

    /**
     * @dev Gets the token name.
     * @return string representing the token name
     */
    function name() external view returns (string memory) {
        return _name;
    }

    /**
     * @dev Gets the token symbol.
     * @return string representing the token symbol
     */
    function symbol() external view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns an URI for a given token ID.
     * Throws if the token ID does not exist. May return an empty string.
     * @param tokenId uint256 ID of the token to query
     */
    function tokenURI(uint256 tokenId) external view returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
        return _tokenURIs[tokenId];
    }

    /**
     * @dev Internal function to set the token URI for a given token.
     * Reverts if the token ID does not exist.
     * @param tokenId uint256 ID of the token to set its URI
     * @param uri string URI to assign
     */
    function _setTokenURI(uint256 tokenId, string memory uri) internal {
        require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
        _tokenURIs[tokenId] = uri;
    }

    /**
     * @dev Internal function to burn a specific token.
     * Reverts if the token does not exist.
     * Deprecated, use _burn(uint256) instead.
     * @param owner owner of the token to burn
     * @param tokenId uint256 ID of the token being burned by the msg.sender
     */
    function _burn(address owner, uint256 tokenId) internal {
        super._burn(owner, tokenId);

        // Clear metadata (if any)
        if (bytes(_tokenURIs[tokenId]).length != 0) {
            delete _tokenURIs[tokenId];
        }
    }
}

contract ERC721Full is ERC721, ERC721Enumerable, ERC721Metadata {
    constructor (string memory name, string memory symbol) public ERC721Metadata(name, symbol) {
        // solhint-disable-previous-line no-empty-blocks
    }
}

contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        _owner = _msgSender();
        emit OwnershipTransferred(address(0), _owner);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(isOwner(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Returns true if the caller is the current owner.
     */
    function isOwner() public view returns (bool) {
        return _msgSender() == _owner;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public onlyOwner {
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     */
    function _transferOwnership(address newOwner) internal {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

library String {

    /**
     * @dev Converts a `uint256` to a `string`.
     * via OraclizeAPI - MIT licence
     * https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
     */
    function fromUint(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        uint256 index = digits - 1;
        temp = value;
        while (temp != 0) {
            buffer[index--] = byte(uint8(48 + temp % 10));
            temp /= 10;
        }
        return string(buffer);
    }

    bytes constant alphabet = "0123456789abcdef";

    function fromAddress(address _addr) internal pure returns(string memory) {
        bytes32 value = bytes32(uint256(_addr));
        bytes memory str = new bytes(42);
        str[0] = '0';
        str[1] = 'x';
        for (uint i = 0; i < 20; i++) {
            str[2+i*2] = alphabet[uint(uint8(value[i + 12] >> 4))];
            str[3+i*2] = alphabet[uint(uint8(value[i + 12] & 0x0F))];
        }
        return string(str);
    }

}

contract GenericAsset is ERC721Full, Ownable {

    bool public isTradable;

    Counters.Counter public _tokenIds;

    mapping (address => bool) public approvedMinters;

    string public constant baseURI = "https://api.immutable.com/asset/";

    constructor(
        string memory _name,
        string memory _ticker
    )
        ERC721Full(_name, _ticker) 
        public 
    {
        setMinterStatus(msg.sender, true);
    }

    event MinterStatusChanged(
        address minter,
        bool status
    );

    event TradabilityStatusChanged(
        bool status
    );

    modifier onlyMinters(address _minter) {
        require(
            approvedMinters[_minter] == true,
            "Generic Asset: not an approved minter"
        );
        _;
    }

    /**
     * @dev Set the status of a minter
     *
     * @param _minter Address of the minter
     * @param _status Boolean whether they can or cannot mint assets
     */
    function setMinterStatus(
        address _minter,
        bool _status
    ) 
        public
        onlyOwner
    {
        approvedMinters[_minter] = _status;

        emit MinterStatusChanged(_minter, _status);
    }

    /**
     * @dev Set trading to be enabled or disabled.
     *
     * @param _status Pass true or false to enable/disable trading
     */
    function setTradabilityStatus(
        bool _status
    )  
        public
        onlyOwner
    {
        isTradable = _status;

        emit TradabilityStatusChanged(_status);
    }

    /**
     * @dev Transfer cards to another address. Trading must be unlocked to transfer.
     * Can be called by the owner or an approved spender.
     * 
     * @param from The owner of the card
     * @param to The recipient of the card to send to
     * @param tokenId The id of the card you'd like to transfer
     */
    function _transferFrom(
        address from,
        address to,
        uint256 tokenId
    )
        internal

    {
        require(
            isTradable == true,
            "Generic Asset: not yet tradable"
        );

        super._transferFrom(from, to, tokenId);
    }

    /**
     * @dev Get the URI scheme of the token
     *
     * @param _tokenId is the ID of the token to get the URI for
     */
    function tokenURI(
        uint256 _tokenId
    ) 
        external 
        view 
        returns (string memory) 
    {
        return string(abi.encodePacked(
            baseURI,
            String.fromAddress(address(this)),
            "/",
            String.fromUint(_tokenId)
        ));
    }

    function totalSupply() 
        public 
        view 
        returns (uint256) 
    {
        return _tokenIds.current();
    }
}

contract GenesisBoard is GenericAsset {

    mapping (uint256 => uint8) public boardToLevel;

    event GenesisBoardMinted(
        uint256 tokenId,
        address owner,
        uint8 level
    );

    constructor(
        string memory _name,
        string memory _ticker
    )
        GenericAsset(_name, _ticker)
        public 
    {
        setMinterStatus(msg.sender, true);
    }

    /**
     * @dev Mint multiple boards
     *
     * @param _to The owners to receive the assets
     * @param _level The level of each board
     */
    function mintMultiple(
        address[] memory _to,
        uint8[] memory _level
    )
        public
        onlyMinters(msg.sender)
    {
        for (uint i = 0; i < _to.length; i++) {
            mint(_to[i], _level[i]);
        }
    }

    /**
     * @dev Mint a single board
     *
     * @param _to The owner to receive the asset
     * @param _level The level of the board to mint
     */
    function mint(
        address _to,
        uint8 _level
    )
        public
        onlyMinters(msg.sender)
        returns (uint256 tokenId)
    {
        _tokenIds.increment();

        uint256 newItemId = _tokenIds.current();
        _mint(_to, newItemId);
        boardToLevel[newItemId] = _level;

        emit GenesisBoardMinted(newItemId, _to, _level);

        return newItemId;
    }

    /**
     * @dev Return the level of the board
     * 
     * @param _tokenId The token to query against
     */
    function getBoardLevel(
        uint256 _tokenId
    )
        public
        view
        returns (uint8)
    {
        return boardToLevel[_tokenId];
    }
}

{
  "compilationTarget": {
    "GenesisBoard.sol": "GenesisBoard"
  },
  "evmVersion": "petersburg",
  "libraries": {},
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}