// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.19;

import {ERC1967Proxy} from "openzeppelin/proxy/ERC1967/ERC1967Proxy.sol";
import {
    OwnableAccessControlUpgradeable,
    NotRoleOrOwner
} from "tl-sol-tools/upgradeable/access/OwnableAccessControlUpgradeable.sol";
import {IERC721} from "openzeppelin/interfaces/IERC721.sol";

/*//////////////////////////////////////////////////////////////////////////
                            Doppelganger
//////////////////////////////////////////////////////////////////////////*/

/// @title Doppelganger.sol
/// @notice contract where each owner can set their metadata from an array of choices that is set at the contract level
/// @dev this works for only ERC721TL contracts, implementation contract should reflect that
/// @author transientlabs.xyz
/// @custom:version 2.6.0
contract Doppelganger is ERC1967Proxy {
    /*//////////////////////////////////////////////////////////////////////////
                                    Constants
    //////////////////////////////////////////////////////////////////////////*/

    bytes32 public constant ADMIN_ROLE = keccak256("ADMIN_ROLE");

    // bytes32(uint256(keccak256('erc721.tl.doppelganger')) - 1);
    bytes32 public constant METADATA_STORAGE_SLOT = 0xe8e107277cf2bf4ca5b1c80e072dc96f1981a6e70d5a59566b0c646a780d487b;

    /*//////////////////////////////////////////////////////////////////////////
                                    Events
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Event emitted when a new doppelganger is added
    event NewURIAdded(address indexed sender, string newUri, uint256 index);

    /// @notice ERC-4906 event for when metadata is changed
    event MetadataUpdate(uint256 tokenId);

    /*//////////////////////////////////////////////////////////////////////////
                                    Errors
    //////////////////////////////////////////////////////////////////////////*/

    error Unauthorized();

    error MetadataSelectionDoesNotExist(uint256 selection);

    /*//////////////////////////////////////////////////////////////////////////
                                    Structs
    //////////////////////////////////////////////////////////////////////////*/

    struct DoppelgangerStorage {
        mapping(uint256 => uint256) tokens;
        string[] uris;
    }

    /*//////////////////////////////////////////////////////////////////////////
                                    Constructor
    //////////////////////////////////////////////////////////////////////////*/

    /// @param name: the name of the contract
    /// @param symbol: the symbol of the contract
    /// @param defaultRoyaltyRecipient: the default address for royalty payments
    /// @param defaultRoyaltyPercentage: the default royalty percentage of basis points (out of 10,000)
    /// @param initOwner: initial owner of the contract
    /// @param admins: array of admin addresses to add to the contract
    /// @param enableStory: a bool deciding whether to add story fuctionality or not
    /// @param blockListRegistry: address of the blocklist registry to use
    constructor(
        address implementation,
        string memory name,
        string memory symbol,
        address defaultRoyaltyRecipient,
        uint256 defaultRoyaltyPercentage,
        address initOwner,
        address[] memory admins,
        bool enableStory,
        address blockListRegistry
    )
        ERC1967Proxy(
            implementation,
            abi.encodeWithSelector(
                0x1fbd2402, // selector for "initialize(string,string,address,uint256,address,address[],bool,address)"
                name,
                symbol,
                defaultRoyaltyRecipient,
                defaultRoyaltyPercentage,
                initOwner,
                admins,
                enableStory,
                blockListRegistry
            )
        )
    {}

    /*//////////////////////////////////////////////////////////////////////////
                                Admin Write Functions
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice function to add URIs to the URI array
    /// @dev requires contract admin or owner
    /// @param _newURIs: string array of URIs
    function addNewURIs(string[] calldata _newURIs) external {
        if (
            msg.sender != OwnableAccessControlUpgradeable(address(this)).owner()
                && !OwnableAccessControlUpgradeable(address(this)).hasRole(ADMIN_ROLE, msg.sender)
        ) {
            revert Unauthorized();
        }

        DoppelgangerStorage storage store;

        assembly {
            store.slot := METADATA_STORAGE_SLOT
        }

        for (uint256 i = 0; i < _newURIs.length; i++) {
            store.uris.push(_newURIs[i]);

            emit NewURIAdded(msg.sender, _newURIs[i], store.uris.length);
        }
    }

    /*//////////////////////////////////////////////////////////////////////////
                                Public Write Functions
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice function for token owners to change URI for their token
    /// @dev requires msg.sender is the owner of tokenId
    /// @dev cannot change the URI after the uri change cutoff timestamp
    /// @param tokenId: token id of the token to change the URI for
    /// @param tokenUriIndex: index in the the array of the URI to point the token to
    function changeURI(uint256 tokenId, uint256 tokenUriIndex) external {
        if (IERC721(address(this)).ownerOf(tokenId) != msg.sender) revert Unauthorized();

        DoppelgangerStorage storage store;

        assembly {
            store.slot := METADATA_STORAGE_SLOT
        }

        if (tokenUriIndex >= store.uris.length) revert MetadataSelectionDoesNotExist(tokenUriIndex);

        store.tokens[tokenId] = tokenUriIndex;

        emit MetadataUpdate(tokenId);
    }

    /*//////////////////////////////////////////////////////////////////////////
                                External View Functions
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice function to override the ERC-721 tokenURI function
    function tokenURI(uint256 tokenId) external view returns (string memory) {
        IERC721(address(this)).ownerOf(tokenId);

        DoppelgangerStorage storage store;

        assembly {
            store.slot := METADATA_STORAGE_SLOT
        }

        uint256 uri_index = store.tokens[tokenId];

        return store.uris[uri_index];
    }

    /// @notice function to return how many URIs are on the contract
    /// @return uint256 with that number
    function numURIs() external view returns (uint256) {
        DoppelgangerStorage storage store;

        assembly {
            store.slot := METADATA_STORAGE_SLOT
        }

        return store.uris.length;
    }

    /// @notice function to get an array of all available URIs on the contract
    /// @return string array of URIs
    function viewURIOptions() external view returns (string[] memory) {
        DoppelgangerStorage storage store;

        assembly {
            store.slot := METADATA_STORAGE_SLOT
        }

        string[] memory options = new string[](store.uris.length);

        for (uint256 i = 0; i < store.uris.length; i++) {
            options[i] = store.uris[i];
        }

        return options;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/ERC1967/ERC1967Proxy.sol)

pragma solidity ^0.8.0;

import "../Proxy.sol";
import "./ERC1967Upgrade.sol";

/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializing the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        _upgradeToAndCall(_logic, _data, false);
    }

    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        return ERC1967Upgrade._getImplementation();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.3) (proxy/ERC1967/ERC1967Upgrade.sol)

pragma solidity ^0.8.2;

import "../beacon/IBeacon.sol";
import "../../interfaces/IERC1967.sol";
import "../../interfaces/draft-IERC1822.sol";
import "../../utils/Address.sol";
import "../../utils/StorageSlot.sol";

/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 *
 * @custom:oz-upgrades-unsafe-allow delegatecall
 */
abstract contract ERC1967Upgrade is IERC1967 {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;

    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }

    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }

    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        _upgradeTo(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }

    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallUUPS(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        // Upgrades from old implementations will perform a rollback test. This test requires the new
        // implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing
        // this special case will break upgrade paths from old UUPS implementation to new ones.
        if (StorageSlot.getBooleanSlot(_ROLLBACK_SLOT).value) {
            _setImplementation(newImplementation);
        } else {
            try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
                require(slot == _IMPLEMENTATION_SLOT, "ERC1967Upgrade: unsupported proxiableUUID");
            } catch {
                revert("ERC1967Upgrade: new implementation is not UUPS");
            }
            _upgradeToAndCall(newImplementation, data, forceCall);
        }
    }

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }

    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(Address.isContract(newBeacon), "ERC1967: new beacon is not a contract");
        require(
            Address.isContract(IBeacon(newBeacon).implementation()),
            "ERC1967: beacon implementation is not a contract"
        );
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }

    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(
        address newBeacon,
        bytes memory data,
        bool forceCall
    ) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSetUpgradeable {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)

pragma solidity ^0.8.0;

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.3) (interfaces/IERC1967.sol)

pragma solidity ^0.8.0;

/**
 * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.
 *
 * _Available since v4.9._
 */
interface IERC1967 {
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Emitted when the beacon is changed.
     */
    event BeaconUpgraded(address indexed beacon);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC721.sol)

pragma solidity ^0.8.0;

import "../token/ERC721/IERC721.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.1) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
     * constructor.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: setting the version to 255 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint8) {
        return _initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _initializing;
    }
}

// SPDX-License-Identifier: MIT

/// @title NORTH STAR by Jake Fried
/// @author transientlabs.xyz

/*◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺
◹◺                                                                                    ◹◺
◹◺    ***%(/#(///************#/*#/***************#/*%*#/********,***#/**,**,,***.     ◹◺
◹◺    @@@&##(@@@@@(#(@@@@@@#,  ./@@@@@&#(((((((%&&&&%(((((((((((&&(((@@@@@(##@@@%     ◹◺
◹◺    @@@/    @@@@   @@@(    ,*    .&&&,          #&/           @@   @@@@@   @@@#,    ◹◺
◹◺    @@@/  ,  /@@   @@%   @@@@@@,   &&,  *(&&%/   %&&&&%   @@@@@@   @@@@@   @@@&     ◹◺
◹◺    @@@/  (@   @   @@.  *@@@@@@&   @@.         &%&&@@@&   @@@@@@           @@@@     ◹◺
◹◺    @@@/  (@@,     @@@   @@@@@@   *&%.  *@%&&   &@@@@@&   @@@@@@   @@@@@   @@@@     ◹◺
◹◺    @@@/  (@@@@    @@@@          &@@%.  /@&&@   %@@@@@&   @@@@@@   @@@@@   @@@@     ◹◺
◹◺    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&@@&@@&@&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@     ◹◺
◹◺    @@@@@@@@@@@@@@@@@@@@@@@@@@@%%(%@@%&@@(/(%%((&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@     ◹◺
◹◺    @@@@@@@@@@@@@&@@@@@@@@@@##%(&(&(%@@%%@#%%(#%(%%(@@@@@@@@@@@@@@@@@@@@@@@@@@@     ◹◺
◹◺    @&&@#&&@&@@@@@@@@@@@@@(#(#(%#%&%#@@@@%(&%%&&%#(##(@@@@@@@@@@@&@@@@@@@@@@@@@     ◹◺
◹◺    @@@%&&@(@@@@@@@@@@@@##(###&#(&(/,......#/%@#%####%#(@@&@@&&@@@&@@@@@@&@@@@@     ◹◺
◹◺    @@@@@&@@@@@@@@@@@@@(#(###%%@...............%@(%###((%&@@@@@@@@@@&#&@@@@@@@@*    ◹◺
◹◺    @@@@@@@@@@@@@@@@@@##(#%#(@@*.,*##@@...@@##*.*@%&(%(#(@@@@@@@@@@@@@@@@@@@@@@     ◹◺
◹◺    @@@@@@@@@@@@@@@@@@#(((#%#&@./@@@@@@..@&@@@@&.@@###(##%@@@@@@@@@@@@@@@@@@@@@     ◹◺
◹◺    @@@@@@@@@@@@@@@@@@#%#%%%%@&...,#*#...,,.*....@%###%(#%@@@@@@@@@@@@@@@@@@@@@.    ◹◺
◹◺    @@@@@@@@@@@@@@@@@@#%##&##%%/(...,.#&*#@,...,/#%##%#(#&@@@@@@@@@@@@@@@@@@@@@     ◹◺
◹◺    @@@@@@@@@@@@@@@@@@@#((%##%%&@&*....,#/(#.,&@%&%##((#%@@@@@@@@@@@@@@@@@@@@@@     ◹◺
◹◺    @@@@@@@@@@@@@@@@@@@@((((%###(%#(@@@&(@@@&@%#&%##%###@@@@@@@@@@@@@@@@@@@@@@@     ◹◺
◹◺    @@@@@@@@@@#//@@@@@@@@@(%%(%(%@#&@&##&#@/#%&#/&&##(@@@@@@@@@@@@@@@@@@@@@@@@@     ◹◺
◹◺    @@@@@@@@@@@@@@@@@@@@@@@@@/%&(@#((@@&&#@((&##(%%@&&&@@@@@@@%@@@@@@@@@@@@@#@@,    ◹◺
◹◺    @@@@@@@@@@@@@@@@@@@@@&%@@%@@&%(#&@/&&@(@(@(@@@&@%@#%#@@@@@@@/@@@@@@@@@@@@@@     ◹◺
◹◺    @@@@@/%@@@@@@@@@@@@((%&%%&&%&@(&&@@&#@%@@@@##(@#%@%%(%&@@&@@@@@@@@@@@@@@@@@     ◹◺
◹◺    @@@@@          &@##@@*            /&#@((@/     /##%#%(##(%            (@@@@     ◹◺
◹◺    @@@@   @%#@@@   #%%&@((##%    ((&%//#((@&.      @#/%(%&#%%   #@@@@@    @@@#     ◹◺
◹◺    @@@@.      .(%#((&##((%(#%    @(&@(&#((%*   %(   @%(&((%@#   /%&&&,   &@@@@     ◹◺
◹◺    @@@@@@@%*       /%##(#//#%    (%&@@%%(@/   @&%.   &@#(((##           ,@&@@@     ◹◺
◹◺    @@@@   &(%##%,   #//(/#(//    (@@/#@/%(            %%@##&@   #/%(#%   @@@@&     ◹◺
◹◺    /@@@%           (@/%(%#(&%    (/@@&&/&   /&#/@#(    #(##%&   #(@#&%   &@@@%     ◹◺
◹◺    @@@###@(&%(#%#%#((/%(((&/&%#@(##/#@//@(&(%(((##&####&(@%#%&((&&#/@@%%@&%@@(     ◹◺
◹◺                                                                                    ◹◺
◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺◹◺*/

pragma solidity 0.8.19;

import {Doppelganger} from "tl-creator-contracts/doppelganger/Doppelganger.sol";

contract NorthStar is Doppelganger {

    constructor(
        string memory name,
        string memory symbol,
        address defaultRoyaltyRecipient,
        uint256 defaultRoyaltyPercentage,
        address initOwner,
        address[] memory admins,
        bool enableStory,
        address blockListRegistry
    ) Doppelganger(
        0x154DAc76755d2A372804a9C409683F2eeFa9e5e9, // ETH
        // 0x403201aC548dba0e889148137dab984b71230F6c, // GOERLI
        // 0x0E841ae8f9CCDa3bDC14780216B974a477978Fec, // ARBITRUM ONE
        // 0x00059878282ec217c761F20e668932D1A7f3bb97, // ARBITRUM GOERLI
        name,
        symbol,
        defaultRoyaltyRecipient,
        defaultRoyaltyPercentage,
        initOwner,
        admins,
        enableStory,
        blockListRegistry
    ) {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;

import {Initializable} from "openzeppelin-upgradeable/proxy/utils/Initializable.sol";
import {EnumerableSetUpgradeable} from "openzeppelin-upgradeable/utils/structs/EnumerableSetUpgradeable.sol";
import {OwnableUpgradeable} from "openzeppelin-upgradeable/access/OwnableUpgradeable.sol";

/*//////////////////////////////////////////////////////////////////////////
                            Custom Errors
//////////////////////////////////////////////////////////////////////////*/

/// @dev does not have specified role
error NotSpecifiedRole(bytes32 role);

/// @dev is not specified role or owner
error NotRoleOrOwner(bytes32 role);

/*//////////////////////////////////////////////////////////////////////////
                        OwnableAccessControlUpgradeable
//////////////////////////////////////////////////////////////////////////*/

/// @title OwnableAccessControl.sol
/// @notice single owner, flexible access control mechanics
/// @dev can easily be extended by inheriting and applying additional roles
/// @dev by default, only the owner can grant roles but by inheriting, but you
///      may allow other roles to grant roles by using the internal helper.
/// @author transientlabs.xyz
/// @custom:version 2.2.2
abstract contract OwnableAccessControlUpgradeable is Initializable, OwnableUpgradeable {
    /*//////////////////////////////////////////////////////////////////////////
                                State Variables
    //////////////////////////////////////////////////////////////////////////*/

    using EnumerableSetUpgradeable for EnumerableSetUpgradeable.AddressSet;

    uint256 private _c; // counter to be able to revoke all priviledges
    mapping(uint256 => mapping(bytes32 => mapping(address => bool))) private _roleStatus;
    mapping(uint256 => mapping(bytes32 => EnumerableSetUpgradeable.AddressSet)) private _roleMembers;

    /*//////////////////////////////////////////////////////////////////////////
                                Events
    //////////////////////////////////////////////////////////////////////////*/

    /// @param from - address that authorized the role change
    /// @param user - the address who's role has been changed
    /// @param approved - boolean indicating the user's status in role
    /// @param role - the bytes32 role created in the inheriting contract
    event RoleChange(address indexed from, address indexed user, bool indexed approved, bytes32 role);

    /// @param from - address that authorized the revoke
    event AllRolesRevoked(address indexed from);

    /*//////////////////////////////////////////////////////////////////////////
                                Modifiers
    //////////////////////////////////////////////////////////////////////////*/

    modifier onlyRole(bytes32 role) {
        if (!hasRole(role, msg.sender)) {
            revert NotSpecifiedRole(role);
        }
        _;
    }

    modifier onlyRoleOrOwner(bytes32 role) {
        if (!hasRole(role, msg.sender) && owner() != msg.sender) {
            revert NotRoleOrOwner(role);
        }
        _;
    }

    /*//////////////////////////////////////////////////////////////////////////
                                Initializer
    //////////////////////////////////////////////////////////////////////////*/

    /// @param initOwner - the address of the initial owner
    function __OwnableAccessControl_init(address initOwner) internal onlyInitializing {
        __Ownable_init();
        _transferOwnership(initOwner);
        __OwnableAccessControl_init_unchained();
    }

    function __OwnableAccessControl_init_unchained() internal onlyInitializing {}

    /*//////////////////////////////////////////////////////////////////////////
                                External Role Functions
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice function to revoke all roles currently present
    /// @dev increments the `_c` variables
    /// @dev requires owner privileges
    function revokeAllRoles() external onlyOwner {
        _c++;
        emit AllRolesRevoked(msg.sender);
    }

    /// @notice function to renounce role
    /// @param role - bytes32 role created in inheriting contracts
    function renounceRole(bytes32 role) external {
        address[] memory members = new address[](1);
        members[0] = msg.sender;
        _setRole(role, members, false);
    }

    /// @notice function to grant/revoke a role to an address
    /// @dev requires owner to call this function but this may be further
    ///      extended using the internal helper function in inheriting contracts
    /// @param role - bytes32 role created in inheriting contracts
    /// @param roleMembers - list of addresses that should have roles attached to them based on `status`
    /// @param status - bool whether to remove or add `roleMembers` to the `role`
    function setRole(bytes32 role, address[] memory roleMembers, bool status) external onlyOwner {
        _setRole(role, roleMembers, status);
    }

    /*//////////////////////////////////////////////////////////////////////////
                                External View Functions
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice function to see if an address is the owner
    /// @param role - bytes32 role created in inheriting contracts
    /// @param potentialRoleMember - address to check for role membership
    function hasRole(bytes32 role, address potentialRoleMember) public view returns (bool) {
        return _roleStatus[_c][role][potentialRoleMember];
    }

    /// @notice function to get role members
    /// @param role - bytes32 role created in inheriting contracts
    function getRoleMembers(bytes32 role) public view returns (address[] memory) {
        return _roleMembers[_c][role].values();
    }

    /*//////////////////////////////////////////////////////////////////////////
                                Internal Helper Functions
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice helper function to set addresses for a role
    /// @param role - bytes32 role created in inheriting contracts
    /// @param roleMembers - list of addresses that should have roles attached to them based on `status`
    /// @param status - bool whether to remove or add `roleMembers` to the `role`
    function _setRole(bytes32 role, address[] memory roleMembers, bool status) internal {
        for (uint256 i = 0; i < roleMembers.length; i++) {
            _roleStatus[_c][role][roleMembers[i]] = status;
            if (status) {
                _roleMembers[_c][role].add(roleMembers[i]);
            } else {
                _roleMembers[_c][role].remove(roleMembers[i]);
            }
            emit RoleChange(msg.sender, roleMembers[i], status, role);
        }
    }

    /*//////////////////////////////////////////////////////////////////////////
                                Upgradeability Gap
    //////////////////////////////////////////////////////////////////////////*/

    /// @dev gap variable - see https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
    uint256[50] private _gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)

pragma solidity ^0.8.0;

/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())

            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())

            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }

    /**
     * @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);

    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive() external payable virtual {
        _fallback();
    }

    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overridden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)

pragma solidity ^0.8.0;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)

pragma solidity ^0.8.0;

/**
 * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}

{
  "compilationTarget": {
    "src/NorthStar.sol": "NorthStar"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 20000
  },
  "remappings": [
    ":blocklist/=lib/tl-creator-contracts/lib/blocklist/",
    ":ds-test/=lib/forge-std/lib/ds-test/src/",
    ":forge-std/=lib/forge-std/src/",
    ":openzeppelin-contracts-upgradeable/=lib/tl-creator-contracts/lib/openzeppelin-contracts-upgradeable/",
    ":openzeppelin-contracts/=lib/tl-creator-contracts/lib/openzeppelin-contracts/",
    ":openzeppelin-upgradeable/=lib/tl-creator-contracts/lib/openzeppelin-contracts-upgradeable/contracts/",
    ":openzeppelin/=lib/tl-creator-contracts/lib/openzeppelin-contracts/contracts/",
    ":sstore2/=lib/tl-creator-contracts/lib/sstore2/contracts/",
    ":story-contract/=lib/tl-creator-contracts/lib/story-contract/src/",
    ":tl-blocklist/=lib/tl-creator-contracts/lib/blocklist/src/",
    ":tl-creator-contracts/=lib/tl-creator-contracts/src/",
    ":tl-creator/=lib/tl-creator-contracts/src/",
    ":tl-sol-tools/=lib/tl-creator-contracts/lib/tl-sol-tools/src/",
    ":tl-story/=lib/tl-creator-contracts/lib/story-contract/src/",
    "lib/forge-std:ds-test/=lib/forge-std/lib/ds-test/src/",
    "lib/tl-creator-contracts:blocklist/=lib/tl-creator-contracts/lib/blocklist/src/",
    "lib/tl-creator-contracts:ds-test/=lib/tl-creator-contracts/lib/forge-std/lib/ds-test/src/",
    "lib/tl-creator-contracts:forge-std/=lib/tl-creator-contracts/lib/forge-std/src/",
    "lib/tl-creator-contracts:openzeppelin-contracts-upgradeable/=lib/tl-creator-contracts/lib/openzeppelin-contracts-upgradeable/",
    "lib/tl-creator-contracts:openzeppelin-contracts/=lib/tl-creator-contracts/lib/openzeppelin-contracts/",
    "lib/tl-creator-contracts:openzeppelin-upgradeable/=lib/tl-creator-contracts/lib/openzeppelin-contracts-upgradeable/contracts/",
    "lib/tl-creator-contracts:openzeppelin/=lib/tl-creator-contracts/lib/openzeppelin-contracts/contracts/",
    "lib/tl-creator-contracts:sstore2/=lib/tl-creator-contracts/lib/sstore2/contracts/",
    "lib/tl-creator-contracts:story-contract/=lib/tl-creator-contracts/lib/story-contract/src/",
    "lib/tl-creator-contracts:tl-blocklist/=lib/tl-creator-contracts/lib/blocklist/src/",
    "lib/tl-creator-contracts:tl-creator-contracts/=lib/tl-creator-contracts/src/",
    "lib/tl-creator-contracts:tl-sol-tools/=lib/tl-creator-contracts/lib/tl-sol-tools/src/",
    "lib/tl-creator-contracts:tl-story/=lib/tl-creator-contracts/lib/story-contract/src/"
  ]
}