// SPDX-License-Identifier: MITpragmasolidity >=0.6.2 <0.8.0;import"../LibPart.sol";
abstractcontractAbstractRoyalties{
mapping (uint256=> LibPart.Part[]) public royalties;
function_saveRoyalties(uint256 _id, LibPart.Part[] memory _royalties) internal{
for (uint i =0; i < _royalties.length; i++) {
require(_royalties[i].account !=address(0x0), "Recipient should be present");
require(_royalties[i].value!=0, "Royalty value should be positive");
royalties[_id].push(_royalties[i]);
}
_onRoyaltiesSet(_id, _royalties);
}
function_updateAccount(uint256 _id, address _from, address _to) internal{
uint length = royalties[_id].length;
for(uint i =0; i < length; i++) {
if (royalties[_id][i].account == _from) {
royalties[_id][i].account =address(uint160(_to));
}
}
}
function_onRoyaltiesSet(uint256 _id, LibPart.Part[] memory _royalties) virtualinternal;
}
Contract Source Code
File 2 of 32: AddressUpgradeable.sol
// SPDX-License-Identifier: MITpragmasolidity >=0.6.2 <0.8.0;/**
* @dev Collection of functions related to the address type
*/libraryAddressUpgradeable{
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/functionisContract(address account) internalviewreturns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in// construction, since the code is only stored at the end of the// constructor execution.uint256 size;
// solhint-disable-next-line no-inline-assemblyassembly { size :=extcodesize(account) }
return size >0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/functionsendValue(addresspayable recipient, uint256 amount) internal{
require(address(this).balance>= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/functionfunctionCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCall(address target, bytesmemory data, stringmemory errorMessage) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target, bytesmemory data, uint256 value) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target, bytesmemory data, uint256 value, stringmemory errorMessage) internalreturns (bytesmemory) {
require(address(this).balance>= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytesmemory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target, bytesmemory data) internalviewreturns (bytesmemory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target, bytesmemory data, stringmemory errorMessage) internalviewreturns (bytesmemory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytesmemory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function_verifyCallResult(bool success, bytesmemory returndata, stringmemory errorMessage) privatepurereturns(bytesmemory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if presentif (returndata.length>0) {
// The easiest way to bubble the revert reason is using memory via assembly// solhint-disable-next-line no-inline-assemblyassembly {
let returndata_size :=mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
Contract Source Code
File 3 of 32: ContextUpgradeable.sol
// SPDX-License-Identifier: MITpragmasolidity >=0.6.0 <0.8.0;import"../proxy/Initializable.sol";
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/abstractcontractContextUpgradeableisInitializable{
function__Context_init() internalinitializer{
__Context_init_unchained();
}
function__Context_init_unchained() internalinitializer{
}
function_msgSender() internalviewvirtualreturns (addresspayable) {
returnmsg.sender;
}
function_msgData() internalviewvirtualreturns (bytesmemory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691returnmsg.data;
}
uint256[50] private __gap;
}
Contract Source Code
File 4 of 32: ECDSAUpgradeable.sol
// SPDX-License-Identifier: MITpragmasolidity >=0.6.0 <0.8.0;/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/libraryECDSAUpgradeable{
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/functionrecover(bytes32 hash, bytesmemory signature) internalpurereturns (address) {
// Check the signature lengthif (signature.length!=65) {
revert("ECDSA: invalid signature length");
}
// Divide the signature in r, s and v variablesbytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them// currently is to use assembly.// solhint-disable-next-line no-inline-assemblyassembly {
r :=mload(add(signature, 0x20))
s :=mload(add(signature, 0x40))
v :=byte(0, mload(add(signature, 0x60)))
}
return recover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover-bytes32-bytes-} that receives the `v`,
* `r` and `s` signature fields separately.
*/functionrecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internalpurereturns (address) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines// the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most// signatures from current libraries generate a unique signature with an s-value in the lower half order.//// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept// these malleable signatures as well.require(uint256(s) <=0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0, "ECDSA: invalid signature 's' value");
require(v ==27|| v ==28, "ECDSA: invalid signature 'v' value");
// If the signature is valid (and not malleable), return the signer addressaddress signer =ecrecover(hash, v, r, s);
require(signer !=address(0), "ECDSA: invalid signature");
return signer;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* replicates the behavior of the
* https://github.com/ethereum/wiki/wiki/JSON-RPC#eth_sign[`eth_sign`]
* JSON-RPC method.
*
* See {recover}.
*/functiontoEthSignedMessageHash(bytes32 hash) internalpurereturns (bytes32) {
// 32 is the length in bytes of hash,// enforced by the type signature abovereturnkeccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
}
Contract Source Code
File 5 of 32: EIP712Upgradeable.sol
// SPDX-License-Identifier: MITpragmasolidity >=0.6.0 <0.8.0;import"../proxy/Initializable.sol";
/**
* @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
*
* The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
* thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
* they need in their contracts using a combination of `abi.encode` and `keccak256`.
*
* This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
* scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
* ({_hashTypedDataV4}).
*
* The implementation of the domain separator was designed to be as efficient as possible while still properly updating
* the chain id to protect against replay attacks on an eventual fork of the chain.
*
* NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
* https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
*
* _Available since v3.4._
*/abstractcontractEIP712UpgradeableisInitializable{
/* solhint-disable var-name-mixedcase */bytes32private _HASHED_NAME;
bytes32private _HASHED_VERSION;
bytes32privateconstant _TYPE_HASH =keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");
/* solhint-enable var-name-mixedcase *//**
* @dev Initializes the domain separator and parameter caches.
*
* The meaning of `name` and `version` is specified in
* https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
*
* - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
* - `version`: the current major version of the signing domain.
*
* NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
* contract upgrade].
*/function__EIP712_init(stringmemory name, stringmemory version) internalinitializer{
__EIP712_init_unchained(name, version);
}
function__EIP712_init_unchained(stringmemory name, stringmemory version) internalinitializer{
bytes32 hashedName =keccak256(bytes(name));
bytes32 hashedVersion =keccak256(bytes(version));
_HASHED_NAME = hashedName;
_HASHED_VERSION = hashedVersion;
}
/**
* @dev Returns the domain separator for the current chain.
*/function_domainSeparatorV4() internalviewreturns (bytes32) {
return _buildDomainSeparator(_TYPE_HASH, _EIP712NameHash(), _EIP712VersionHash());
}
function_buildDomainSeparator(bytes32 typeHash, bytes32 name, bytes32 version) privateviewreturns (bytes32) {
returnkeccak256(
abi.encode(
typeHash,
name,
version,
_getChainId(),
address(this)
)
);
}
/**
* @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
* function returns the hash of the fully encoded EIP712 message for this domain.
*
* This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
*
* ```solidity
* bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
* keccak256("Mail(address to,string contents)"),
* mailTo,
* keccak256(bytes(mailContents))
* )));
* address signer = ECDSA.recover(digest, signature);
* ```
*/function_hashTypedDataV4(bytes32 structHash) internalviewvirtualreturns (bytes32) {
returnkeccak256(abi.encodePacked("\x19\x01", _domainSeparatorV4(), structHash));
}
function_getChainId() privateviewreturns (uint256 chainId) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691// solhint-disable-next-line no-inline-assemblyassembly {
chainId :=chainid()
}
}
/**
* @dev The hash of the name parameter for the EIP712 domain.
*
* NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
* are a concern.
*/function_EIP712NameHash() internalvirtualviewreturns (bytes32) {
return _HASHED_NAME;
}
/**
* @dev The hash of the version parameter for the EIP712 domain.
*
* NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
* are a concern.
*/function_EIP712VersionHash() internalvirtualviewreturns (bytes32) {
return _HASHED_VERSION;
}
uint256[50] private __gap;
}
Contract Source Code
File 6 of 32: ERC1155Base.sol
Contract Source Code
File 7 of 32: ERC1155BaseURI.sol
Contract Source Code
File 8 of 32: ERC1155BurnableUpgradeable.sol
// SPDX-License-Identifier: MITpragmasolidity >=0.6.0 <0.8.0;import"./ERC1155Upgradeable.sol";
import"../../proxy/Initializable.sol";
/**
* @dev Extension of {ERC1155} that allows token holders to destroy both their
* own tokens and those that they have been approved to use.
*
* _Available since v3.1._
*/abstractcontractERC1155BurnableUpgradeableisInitializable, ERC1155Upgradeable{
function__ERC1155Burnable_init() internalinitializer{
__Context_init_unchained();
__ERC165_init_unchained();
__ERC1155Burnable_init_unchained();
}
function__ERC1155Burnable_init_unchained() internalinitializer{
}
functionburn(address account, uint256 id, uint256 value) publicvirtual{
require(
account == _msgSender() || isApprovedForAll(account, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
_burn(account, id, value);
}
functionburnBatch(address account, uint256[] memory ids, uint256[] memory values) publicvirtual{
require(
account == _msgSender() || isApprovedForAll(account, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
_burnBatch(account, ids, values);
}
uint256[50] private __gap;
}
Contract Source Code
File 9 of 32: ERC1155DefaultApproval.sol
Contract Source Code
File 10 of 32: ERC1155Lazy.sol
Contract Source Code
File 11 of 32: ERC1155Nfraction.sol
Contract Source Code
File 12 of 32: ERC1155Upgradeable.sol
// SPDX-License-Identifier: MITpragmasolidity >=0.6.0 <0.8.0;import"./IERC1155Upgradeable.sol";
import"./IERC1155MetadataURIUpgradeable.sol";
import"./IERC1155ReceiverUpgradeable.sol";
import"../../utils/ContextUpgradeable.sol";
import"../../introspection/ERC165Upgradeable.sol";
import"../../math/SafeMathUpgradeable.sol";
import"../../utils/AddressUpgradeable.sol";
import"../../proxy/Initializable.sol";
/**
*
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/contractERC1155UpgradeableisInitializable, ContextUpgradeable, ERC165Upgradeable, IERC1155Upgradeable, IERC1155MetadataURIUpgradeable{
usingSafeMathUpgradeableforuint256;
usingAddressUpgradeableforaddress;
// Mapping from token ID to account balancesmapping (uint256=>mapping(address=>uint256)) private _balances;
// Mapping from account to operator approvalsmapping (address=>mapping(address=>bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.jsonstringprivate _uri;
/*
* bytes4(keccak256('balanceOf(address,uint256)')) == 0x00fdd58e
* bytes4(keccak256('balanceOfBatch(address[],uint256[])')) == 0x4e1273f4
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('safeTransferFrom(address,address,uint256,uint256,bytes)')) == 0xf242432a
* bytes4(keccak256('safeBatchTransferFrom(address,address,uint256[],uint256[],bytes)')) == 0x2eb2c2d6
*
* => 0x00fdd58e ^ 0x4e1273f4 ^ 0xa22cb465 ^
* 0xe985e9c5 ^ 0xf242432a ^ 0x2eb2c2d6 == 0xd9b67a26
*/bytes4privateconstant _INTERFACE_ID_ERC1155 =0xd9b67a26;
/*
* bytes4(keccak256('uri(uint256)')) == 0x0e89341c
*/bytes4privateconstant _INTERFACE_ID_ERC1155_METADATA_URI =0x0e89341c;
/**
* @dev See {_setURI}.
*/function__ERC1155_init(stringmemory uri_) internalinitializer{
__Context_init_unchained();
__ERC165_init_unchained();
__ERC1155_init_unchained(uri_);
}
function__ERC1155_init_unchained(stringmemory uri_) internalinitializer{
_setURI(uri_);
// register the supported interfaces to conform to ERC1155 via ERC165
_registerInterface(_INTERFACE_ID_ERC1155);
// register the supported interfaces to conform to ERC1155MetadataURI via ERC165
_registerInterface(_INTERFACE_ID_ERC1155_METADATA_URI);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/functionuri(uint256) externalviewvirtualoverridereturns (stringmemory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/functionbalanceOf(address account, uint256 id) publicviewvirtualoverridereturns (uint256) {
require(account !=address(0), "ERC1155: balance query for the zero address");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/functionbalanceOfBatch(address[] memory accounts,
uint256[] memory ids
)
publicviewvirtualoverridereturns (uint256[] memory)
{
require(accounts.length== ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances =newuint256[](accounts.length);
for (uint256 i =0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/functionsetApprovalForAll(address operator, bool approved) publicvirtualoverride{
require(_msgSender() != operator, "ERC1155: setting approval status for self");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/functionisApprovedForAll(address account, address operator) publicviewvirtualoverridereturns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 id,
uint256 amount,
bytesmemory data
)
publicvirtualoverride{
require(to !=address(0), "ERC1155: transfer to the zero address");
require(
from== _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);
_balances[id][from] = _balances[id][from].sub(amount, "ERC1155: insufficient balance for transfer");
_balances[id][to] = _balances[id][to].add(amount);
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/functionsafeBatchTransferFrom(addressfrom,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
)
publicvirtualoverride{
require(ids.length== amounts.length, "ERC1155: ids and amounts length mismatch");
require(to !=address(0), "ERC1155: transfer to the zero address");
require(
from== _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: transfer caller is not owner nor approved"
);
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i =0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
_balances[id][from] = _balances[id][from].sub(
amount,
"ERC1155: insufficient balance for transfer"
);
_balances[id][to] = _balances[id][to].add(amount);
}
emit TransferBatch(operator, from, to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/function_setURI(stringmemory newuri) internalvirtual{
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `account`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - If `account` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/function_mint(address account, uint256 id, uint256 amount, bytesmemory data) internalvirtual{
require(account !=address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), account, _asSingletonArray(id), _asSingletonArray(amount), data);
_balances[id][account] = _balances[id][account].add(amount);
emit TransferSingle(operator, address(0), account, id, amount);
_doSafeTransferAcceptanceCheck(operator, address(0), account, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/function_mintBatch(address to, uint256[] memory ids, uint256[] memory amounts, bytesmemory data) internalvirtual{
require(to !=address(0), "ERC1155: mint to the zero address");
require(ids.length== amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint i =0; i < ids.length; i++) {
_balances[ids[i]][to] = amounts[i].add(_balances[ids[i]][to]);
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `account`
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens of token type `id`.
*/function_burn(address account, uint256 id, uint256 amount) internalvirtual{
require(account !=address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, account, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");
_balances[id][account] = _balances[id][account].sub(
amount,
"ERC1155: burn amount exceeds balance"
);
emit TransferSingle(operator, account, address(0), id, amount);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/function_burnBatch(address account, uint256[] memory ids, uint256[] memory amounts) internalvirtual{
require(account !=address(0), "ERC1155: burn from the zero address");
require(ids.length== amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, account, address(0), ids, amounts, "");
for (uint i =0; i < ids.length; i++) {
_balances[ids[i]][account] = _balances[ids[i]][account].sub(
amounts[i],
"ERC1155: burn amount exceeds balance"
);
}
emit TransferBatch(operator, account, address(0), ids, amounts);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/function_beforeTokenTransfer(address operator,
addressfrom,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
)
internalvirtual{ }
function_doSafeTransferAcceptanceCheck(address operator,
addressfrom,
address to,
uint256 id,
uint256 amount,
bytesmemory data
)
private{
if (to.isContract()) {
try IERC1155ReceiverUpgradeable(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155ReceiverUpgradeable(to).onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catchError(stringmemory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function_doSafeBatchTransferAcceptanceCheck(address operator,
addressfrom,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
)
private{
if (to.isContract()) {
try IERC1155ReceiverUpgradeable(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (bytes4 response) {
if (response != IERC1155ReceiverUpgradeable(to).onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catchError(stringmemory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function_asSingletonArray(uint256 element) privatepurereturns (uint256[] memory) {
uint256[] memory array =newuint256[](1);
array[0] = element;
return array;
}
uint256[47] private __gap;
}
Contract Source Code
File 13 of 32: ERC1271.sol
Contract Source Code
File 14 of 32: ERC1271Validator.sol
Contract Source Code
File 15 of 32: ERC165Upgradeable.sol
// SPDX-License-Identifier: MITpragmasolidity >=0.6.0 <0.8.0;import"./IERC165Upgradeable.sol";
import"../proxy/Initializable.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/abstractcontractERC165UpgradeableisInitializable, IERC165Upgradeable{
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/bytes4privateconstant _INTERFACE_ID_ERC165 =0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/mapping(bytes4=>bool) private _supportedInterfaces;
function__ERC165_init() internalinitializer{
__ERC165_init_unchained();
}
function__ERC165_init_unchained() internalinitializer{
// Derived contracts need only register support for their own interfaces,// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverridereturns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/function_registerInterface(bytes4 interfaceId) internalvirtual{
require(interfaceId !=0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] =true;
}
uint256[49] private __gap;
}
// SPDX-License-Identifier: MITpragmasolidity >=0.6.2 <0.8.0;import"./IERC1155Upgradeable.sol";
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/interfaceIERC1155MetadataURIUpgradeableisIERC1155Upgradeable{
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/functionuri(uint256 id) externalviewreturns (stringmemory);
}
Contract Source Code
File 19 of 32: IERC1155ReceiverUpgradeable.sol
// SPDX-License-Identifier: MITpragmasolidity >=0.6.0 <0.8.0;import"../../introspection/IERC165Upgradeable.sol";
/**
* _Available since v3.1._
*/interfaceIERC1155ReceiverUpgradeableisIERC165Upgradeable{
/**
@dev Handles the receipt of a single ERC1155 token type. This function is
called at the end of a `safeTransferFrom` after the balance has been updated.
To accept the transfer, this must return
`bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
(i.e. 0xf23a6e61, or its own function selector).
@param operator The address which initiated the transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param id The ID of the token being transferred
@param value The amount of tokens being transferred
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/functiononERC1155Received(address operator,
addressfrom,
uint256 id,
uint256 value,
bytescalldata data
)
externalreturns(bytes4);
/**
@dev Handles the receipt of a multiple ERC1155 token types. This function
is called at the end of a `safeBatchTransferFrom` after the balances have
been updated. To accept the transfer(s), this must return
`bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
(i.e. 0xbc197c81, or its own function selector).
@param operator The address which initiated the batch transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param ids An array containing ids of each token being transferred (order and length must match values array)
@param values An array containing amounts of each token being transferred (order and length must match ids array)
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/functiononERC1155BatchReceived(address operator,
addressfrom,
uint256[] calldata ids,
uint256[] calldata values,
bytescalldata data
)
externalreturns(bytes4);
}
Contract Source Code
File 20 of 32: IERC1155Upgradeable.sol
// SPDX-License-Identifier: MITpragmasolidity >=0.6.2 <0.8.0;import"../../introspection/IERC165Upgradeable.sol";
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/interfaceIERC1155UpgradeableisIERC165Upgradeable{
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/eventTransferSingle(addressindexed operator, addressindexedfrom, addressindexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/eventTransferBatch(addressindexed operator, addressindexedfrom, addressindexed to, uint256[] ids, uint256[] values);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/eventApprovalForAll(addressindexed account, addressindexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/eventURI(string value, uint256indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/functionbalanceOf(address account, uint256 id) externalviewreturns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/functionbalanceOfBatch(address[] calldata accounts, uint256[] calldata ids) externalviewreturns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/functionsetApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/functionisApprovedForAll(address account, address operator) externalviewreturns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/functionsafeTransferFrom(addressfrom, address to, uint256 id, uint256 amount, bytescalldata data) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/functionsafeBatchTransferFrom(addressfrom, address to, uint256[] calldata ids, uint256[] calldata amounts, bytescalldata data) external;
}
Contract Source Code
File 21 of 32: IERC165Upgradeable.sol
// SPDX-License-Identifier: MITpragmasolidity >=0.6.0 <0.8.0;/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/interfaceIERC165Upgradeable{
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/functionsupportsInterface(bytes4 interfaceId) externalviewreturns (bool);
}
Contract Source Code
File 22 of 32: Initializable.sol
// SPDX-License-Identifier: MIT// solhint-disable-next-line compiler-versionpragmasolidity >=0.4.24 <0.8.0;import"../utils/AddressUpgradeable.sol";
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*/abstractcontractInitializable{
/**
* @dev Indicates that the contract has been initialized.
*/boolprivate _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/boolprivate _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/modifierinitializer() {
require(_initializing || _isConstructor() ||!_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall =!_initializing;
if (isTopLevelCall) {
_initializing =true;
_initialized =true;
}
_;
if (isTopLevelCall) {
_initializing =false;
}
}
/// @dev Returns true if and only if the function is running in the constructorfunction_isConstructor() privateviewreturns (bool) {
return!AddressUpgradeable.isContract(address(this));
}
}
// SPDX-License-Identifier: MITpragmasolidity >=0.6.0 <0.8.0;import"../utils/ContextUpgradeable.sol";
import"../proxy/Initializable.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/abstractcontractOwnableUpgradeableisInitializable, ContextUpgradeable{
addressprivate _owner;
eventOwnershipTransferred(addressindexed previousOwner, addressindexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/function__Ownable_init() internalinitializer{
__Context_init_unchained();
__Ownable_init_unchained();
}
function__Ownable_init_unchained() internalinitializer{
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/functionowner() publicviewvirtualreturns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/modifieronlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/functionrenounceOwnership() publicvirtualonlyOwner{
emit OwnershipTransferred(_owner, address(0));
_owner =address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/functiontransferOwnership(address newOwner) publicvirtualonlyOwner{
require(newOwner !=address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
uint256[49] private __gap;
}
// SPDX-License-Identifier: MITpragmasolidity >=0.6.0 <0.8.0;/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/librarySafeMathUpgradeable{
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/functiontryAdd(uint256 a, uint256 b) internalpurereturns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/functiontrySub(uint256 a, uint256 b) internalpurereturns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/functiontryMul(uint256 a, uint256 b) internalpurereturns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the// benefit is lost if 'b' is also tested.// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522if (a ==0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/functiontryDiv(uint256 a, uint256 b) internalpurereturns (bool, uint256) {
if (b ==0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/functiontryMod(uint256 a, uint256 b) internalpurereturns (bool, uint256) {
if (b ==0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/functionadd(uint256 a, uint256 b) internalpurereturns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/functionsub(uint256 a, uint256 b) internalpurereturns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/functionmul(uint256 a, uint256 b) internalpurereturns (uint256) {
if (a ==0) return0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/functiondiv(uint256 a, uint256 b) internalpurereturns (uint256) {
require(b >0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/functionmod(uint256 a, uint256 b) internalpurereturns (uint256) {
require(b >0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/functionsub(uint256 a, uint256 b, stringmemory errorMessage) internalpurereturns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/functiondiv(uint256 a, uint256 b, stringmemory errorMessage) internalpurereturns (uint256) {
require(b >0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/functionmod(uint256 a, uint256 b, stringmemory errorMessage) internalpurereturns (uint256) {
require(b >0, errorMessage);
return a % b;
}
}
Contract Source Code
File 32 of 32: StringsUpgradeable.sol
// SPDX-License-Identifier: MITpragmasolidity >=0.6.0 <0.8.0;/**
* @dev String operations.
*/libraryStringsUpgradeable{
/**
* @dev Converts a `uint256` to its ASCII `string` representation.
*/functiontoString(uint256 value) internalpurereturns (stringmemory) {
// Inspired by OraclizeAPI's implementation - MIT licence// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.solif (value ==0) {
return"0";
}
uint256 temp = value;
uint256 digits;
while (temp !=0) {
digits++;
temp /=10;
}
bytesmemory buffer =newbytes(digits);
uint256 index = digits -1;
temp = value;
while (temp !=0) {
buffer[index--] =bytes1(uint8(48+ temp %10));
temp /=10;
}
returnstring(buffer);
}
}