// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./Ownable.sol";
import "./ReentrancyGuard.sol";
import "./SafeMath.sol";
import "./TransferHelper.sol";


contract Bridgers is ReentrancyGuard, Ownable {
    using SafeMath for uint256;

    string public name;

    string public symbol;

    event Swap(
        address fromToken,
        string toToken,
        address sender,
        string destination,
        uint256 fromAmount,
        uint256 minReturnAmount
    );


    event SwapEth(
        string toToken,
        address sender,
        string destination,
        uint256 fromAmount,
        uint256 minReturnAmount
    );

    event WithdrawETH(uint256 amount);

    event Withdtraw(address token, uint256 amount);

    constructor() {
        name = "Bridgers1.1";
        symbol = "Bridgers";
    }


    function swap(
        address fromToken,
        string memory toToken,
        string memory destination,
        uint256 fromAmount,
        uint256 minReturnAmount
    ) external nonReentrant {
        require(fromToken != address(0), "FROMTOKEN_CANT_T_BE_0");
        require(fromAmount > 0, "FROM_TOKEN_AMOUNT_MUST_BE_MORE_THAN_0");
        uint256 _inputAmount;
        uint256 _fromTokenBalanceOrigin = IERC20(fromToken).balanceOf(address(this));
        TransferHelper.safeTransferFrom(fromToken, msg.sender, address(this), fromAmount);
        uint256 _fromTokenBalanceNew = IERC20(fromToken).balanceOf(address(this));
        _inputAmount = _fromTokenBalanceNew.sub(_fromTokenBalanceOrigin);
        require(_inputAmount > 0, "NO_FROM_TOKEN_TRANSFER_TO_THIS_CONTRACT");
        emit Swap(fromToken, toToken, msg.sender, destination, fromAmount, minReturnAmount);
    }


    function swapEth(string memory toToken, string memory destination, uint256 minReturnAmount
    ) external payable nonReentrant {
        uint256 _ethAmount = msg.value;
        require(_ethAmount > 0, "ETH_AMOUNT_MUST_BE_MORE_THAN_0");
        emit SwapEth(toToken, msg.sender, destination, _ethAmount, minReturnAmount);
    }

    function withdrawETH(address destination, uint256 amount) external onlyOwner {
        require(destination != address(0), "DESTINATION_CANNT_BE_0_ADDRESS");
        uint256 balance = address(this).balance;
        require(balance >= amount, "AMOUNT_CANNT_MORE_THAN_BALANCE");
        TransferHelper.safeTransferETH(destination, amount);
        emit WithdrawETH(amount);
    }

    function withdraw(address token, address destination, uint256 amount) external onlyOwner {
        require(destination != address(0), "DESTINATION_CANNT_BE_0_ADDRESS");
        require(token != address(0), "TOKEN_MUST_NOT_BE_0");
        uint256 balance = IERC20(token).balanceOf(address(this));
        require(balance >= amount, "AMOUNT_CANNT_MORE_THAN_BALANCE");
        TransferHelper.safeTransfer(token, destination, amount);
        emit Withdtraw(token, amount);
    }

    receive() external payable {}
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address) {
    return msg.sender;
  }

  function _msgData() internal view virtual returns (bytes calldata) {
    return msg.data;
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
  address private _owner;

  event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

  /**
   * @dev Initializes the contract setting the deployer as the initial owner.
     */
  constructor() {
    _setOwner(_msgSender());
  }

  /**
   * @dev Returns the address of the current owner.
     */
  function owner() public view virtual returns (address) {
    return _owner;
  }

  /**
   * @dev Throws if called by any account other than the owner.
     */
  modifier onlyOwner() {
    require(owner() == _msgSender(), "Ownable: caller is not the owner");
    _;
  }

  /**
   * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
  function renounceOwnership() public virtual onlyOwner {
    _setOwner(address(0));
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
  function transferOwnership(address newOwner) public virtual onlyOwner {
    require(newOwner != address(0), "Ownable: new owner is the zero address");
    _setOwner(newOwner);
  }

  function _setOwner(address newOwner) private {
    address oldOwner = _owner;
    _owner = newOwner;
    emit OwnershipTransferred(oldOwner, newOwner);
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
  // Booleans are more expensive than uint256 or any type that takes up a full
  // word because each write operation emits an extra SLOAD to first read the
  // slot's contents, replace the bits taken up by the boolean, and then write
  // back. This is the compiler's defense against contract upgrades and
  // pointer aliasing, and it cannot be disabled.

  // The values being non-zero value makes deployment a bit more expensive,
  // but in exchange the refund on every call to nonReentrant will be lower in
  // amount. Since refunds are capped to a percentage of the total
  // transaction's gas, it is best to keep them low in cases like this one, to
  // increase the likelihood of the full refund coming into effect.
  uint256 private constant _NOT_ENTERED = 1;
  uint256 private constant _ENTERED = 2;

  uint256 private _status;

  constructor() {
    _status = _NOT_ENTERED;
  }

  /**
   * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
  modifier nonReentrant() {
    // On the first call to nonReentrant, _notEntered will be true
    require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

    // Any calls to nonReentrant after this point will fail
    _status = _ENTERED;

    _;

    // By storing the original value once again, a refund is triggered (see
    // https://eips.ethereum.org/EIPS/eip-2200)
    _status = _NOT_ENTERED;
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
 * now has built in overflow checking.
 */
library SafeMath {
  /**
   * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
  function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
  unchecked {
    uint256 c = a + b;
    if (c < a) return (false, 0);
    return (true, c);
  }
  }

  /**
   * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
  function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
  unchecked {
    if (b > a) return (false, 0);
    return (true, a - b);
  }
  }

  /**
   * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
  function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
  unchecked {
    // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
    // benefit is lost if 'b' is also tested.
    // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
    if (a == 0) return (true, 0);
    uint256 c = a * b;
    if (c / a != b) return (false, 0);
    return (true, c);
  }
  }

  /**
   * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
  function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
  unchecked {
    if (b == 0) return (false, 0);
    return (true, a / b);
  }
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
  function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
  unchecked {
    if (b == 0) return (false, 0);
    return (true, a % b);
  }
  }

  /**
   * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
  function add(uint256 a, uint256 b) internal pure returns (uint256) {
    return a + b;
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    return a - b;
  }

  /**
   * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
  function mul(uint256 a, uint256 b) internal pure returns (uint256) {
    return a * b;
  }

  /**
   * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    return a / b;
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
  function mod(uint256 a, uint256 b) internal pure returns (uint256) {
    return a % b;
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
  function sub(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
  unchecked {
    require(b <= a, errorMessage);
    return a - b;
  }
  }

  /**
   * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
  function div(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
  unchecked {
    require(b > 0, errorMessage);
    return a / b;
  }
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
  function mod(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
  unchecked {
    require(b > 0, errorMessage);
    return a % b;
  }
  }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

library TransferHelper {
    function safeApprove(address token, address to, uint value) internal {
        // bytes4(keccak256(bytes('approve(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x095ea7b3, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: APPROVE_FAILED');
    }

    function safeTransfer(address token, address to, uint value) internal {
        // bytes4(keccak256(bytes('transfer(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0xa9059cbb, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: TRANSFER_FAILED');
    }

    function safeTransferFrom(address token, address from, address to, uint value) internal {
        // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x23b872dd, from, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: TRANSFER_FROM_FAILED');
    }

    function safeTransferETH(address to, uint value) internal {
        (bool success,) = to.call{value:value}(new bytes(0));
        require(success, 'TransferHelper: ETH_TRANSFER_FAILED');
    }
}

{
  "compilationTarget": {
    "Bridgers.sol": "Bridgers"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}