// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)pragmasolidity ^0.8.1;/**
* @dev Collection of functions related to the address type
*/libraryAddress{
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/functionisContract(address account) internalviewreturns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0// for contracts in construction, since the code is only stored at the end// of the constructor execution.return account.code.length>0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/functionsendValue(addresspayable recipient, uint256 amount) internal{
require(address(this).balance>= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/functionfunctionCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target, bytesmemory data, uint256 value) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target,
bytesmemory data,
uint256 value,
stringmemory errorMessage
) internalreturns (bytesmemory) {
require(address(this).balance>= value, "Address: insufficient balance for call");
(bool success, bytesmemory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target, bytesmemory data) internalviewreturns (bytesmemory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalviewreturns (bytesmemory) {
(bool success, bytesmemory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/functionfunctionDelegateCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/functionfunctionDelegateCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalreturns (bytesmemory) {
(bool success, bytesmemory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/functionverifyCallResultFromTarget(address target,
bool success,
bytesmemory returndata,
stringmemory errorMessage
) internalviewreturns (bytesmemory) {
if (success) {
if (returndata.length==0) {
// only check isContract if the call was successful and the return data is empty// otherwise we already know that it was a contractrequire(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/functionverifyCallResult(bool success,
bytesmemory returndata,
stringmemory errorMessage
) internalpurereturns (bytesmemory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function_revert(bytesmemory returndata, stringmemory errorMessage) privatepure{
// Look for revert reason and bubble it up if presentif (returndata.length>0) {
// The easiest way to bubble the revert reason is using memory via assembly/// @solidity memory-safe-assemblyassembly {
let returndata_size :=mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
Contract Source Code
File 2 of 15: Arrays.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (utils/Arrays.sol)pragmasolidity ^0.8.0;import"./StorageSlot.sol";
import"./math/Math.sol";
/**
* @dev Collection of functions related to array types.
*/libraryArrays{
usingStorageSlotforbytes32;
/**
* @dev Searches a sorted `array` and returns the first index that contains
* a value greater or equal to `element`. If no such index exists (i.e. all
* values in the array are strictly less than `element`), the array length is
* returned. Time complexity O(log n).
*
* `array` is expected to be sorted in ascending order, and to contain no
* repeated elements.
*/functionfindUpperBound(uint256[] storage array, uint256 element) internalviewreturns (uint256) {
if (array.length==0) {
return0;
}
uint256 low =0;
uint256 high = array.length;
while (low < high) {
uint256 mid = Math.average(low, high);
// Note that mid will always be strictly less than high (i.e. it will be a valid array index)// because Math.average rounds down (it does integer division with truncation).if (unsafeAccess(array, mid).value> element) {
high = mid;
} else {
low = mid +1;
}
}
// At this point `low` is the exclusive upper bound. We will return the inclusive upper bound.if (low >0&& unsafeAccess(array, low -1).value== element) {
return low -1;
} else {
return low;
}
}
/**
* @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
*
* WARNING: Only use if you are certain `pos` is lower than the array length.
*/functionunsafeAccess(address[] storage arr, uint256 pos) internalpurereturns (StorageSlot.AddressSlot storage) {
bytes32 slot;
// We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr`// following https://docs.soliditylang.org/en/v0.8.17/internals/layout_in_storage.html#mappings-and-dynamic-arrays./// @solidity memory-safe-assemblyassembly {
mstore(0, arr.slot)
slot :=add(keccak256(0, 0x20), pos)
}
return slot.getAddressSlot();
}
/**
* @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
*
* WARNING: Only use if you are certain `pos` is lower than the array length.
*/functionunsafeAccess(bytes32[] storage arr, uint256 pos) internalpurereturns (StorageSlot.Bytes32Slot storage) {
bytes32 slot;
// We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr`// following https://docs.soliditylang.org/en/v0.8.17/internals/layout_in_storage.html#mappings-and-dynamic-arrays./// @solidity memory-safe-assemblyassembly {
mstore(0, arr.slot)
slot :=add(keccak256(0, 0x20), pos)
}
return slot.getBytes32Slot();
}
/**
* @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
*
* WARNING: Only use if you are certain `pos` is lower than the array length.
*/functionunsafeAccess(uint256[] storage arr, uint256 pos) internalpurereturns (StorageSlot.Uint256Slot storage) {
bytes32 slot;
// We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr`// following https://docs.soliditylang.org/en/v0.8.17/internals/layout_in_storage.html#mappings-and-dynamic-arrays./// @solidity memory-safe-assemblyassembly {
mstore(0, arr.slot)
slot :=add(keccak256(0, 0x20), pos)
}
return slot.getUint256Slot();
}
}
Contract Source Code
File 3 of 15: Context.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)pragmasolidity ^0.8.0;/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/abstractcontractContext{
function_msgSender() internalviewvirtualreturns (address) {
returnmsg.sender;
}
function_msgData() internalviewvirtualreturns (bytescalldata) {
returnmsg.data;
}
function_contextSuffixLength() internalviewvirtualreturns (uint256) {
return0;
}
}
Contract Source Code
File 4 of 15: Counters.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)pragmasolidity ^0.8.0;/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/libraryCounters{
structCounter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add// this feature: see https://github.com/ethereum/solidity/issues/4637uint256 _value; // default: 0
}
functioncurrent(Counter storage counter) internalviewreturns (uint256) {
return counter._value;
}
functionincrement(Counter storage counter) internal{
unchecked {
counter._value +=1;
}
}
functiondecrement(Counter storage counter) internal{
uint256 value = counter._value;
require(value >0, "Counter: decrement overflow");
unchecked {
counter._value = value -1;
}
}
functionreset(Counter storage counter) internal{
counter._value =0;
}
}
Contract Source Code
File 5 of 15: ERC20.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)pragmasolidity ^0.8.0;import"./IERC20.sol";
import"./extensions/IERC20Metadata.sol";
import"../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* The default value of {decimals} is 18. To change this, you should override
* this function so it returns a different value.
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/contractERC20isContext, IERC20, IERC20Metadata{
mapping(address=>uint256) private _balances;
mapping(address=>mapping(address=>uint256)) private _allowances;
uint256private _totalSupply;
stringprivate _name;
stringprivate _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/constructor(stringmemory name_, stringmemory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/functionname() publicviewvirtualoverridereturns (stringmemory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/functionsymbol() publicviewvirtualoverridereturns (stringmemory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the default value returned by this function, unless
* it's overridden.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/functiondecimals() publicviewvirtualoverridereturns (uint8) {
return18;
}
/**
* @dev See {IERC20-totalSupply}.
*/functiontotalSupply() publicviewvirtualoverridereturns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/functionbalanceOf(address account) publicviewvirtualoverridereturns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/functiontransfer(address to, uint256 amount) publicvirtualoverridereturns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
returntrue;
}
/**
* @dev See {IERC20-allowance}.
*/functionallowance(address owner, address spender) publicviewvirtualoverridereturns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/functionapprove(address spender, uint256 amount) publicvirtualoverridereturns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
returntrue;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/functiontransferFrom(addressfrom, address to, uint256 amount) publicvirtualoverridereturns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
returntrue;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/functionincreaseAllowance(address spender, uint256 addedValue) publicvirtualreturns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
returntrue;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/functiondecreaseAllowance(address spender, uint256 subtractedValue) publicvirtualreturns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
returntrue;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/function_transfer(addressfrom, address to, uint256 amount) internalvirtual{
require(from!=address(0), "ERC20: transfer from the zero address");
require(to !=address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/function_mint(address account, uint256 amount) internalvirtual{
require(account !=address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/function_burn(address account, uint256 amount) internalvirtual{
require(account !=address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/function_approve(address owner, address spender, uint256 amount) internalvirtual{
require(owner !=address(0), "ERC20: approve from the zero address");
require(spender !=address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/function_spendAllowance(address owner, address spender, uint256 amount) internalvirtual{
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance !=type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/function_beforeTokenTransfer(addressfrom, address to, uint256 amount) internalvirtual{}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/function_afterTokenTransfer(addressfrom, address to, uint256 amount) internalvirtual{}
}
Contract Source Code
File 6 of 15: IERC20.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)pragmasolidity ^0.8.0;/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/interfaceIERC20{
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/eventTransfer(addressindexedfrom, addressindexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/eventApproval(addressindexed owner, addressindexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/functiontotalSupply() externalviewreturns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/functionbalanceOf(address account) externalviewreturns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/functiontransfer(address to, uint256 amount) externalreturns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/functionallowance(address owner, address spender) externalviewreturns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/functionapprove(address spender, uint256 amount) externalreturns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/functiontransferFrom(addressfrom, address to, uint256 amount) externalreturns (bool);
}
Contract Source Code
File 7 of 15: IERC20Metadata.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)pragmasolidity ^0.8.0;import"../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/interfaceIERC20MetadataisIERC20{
/**
* @dev Returns the name of the token.
*/functionname() externalviewreturns (stringmemory);
/**
* @dev Returns the symbol of the token.
*/functionsymbol() externalviewreturns (stringmemory);
/**
* @dev Returns the decimals places of the token.
*/functiondecimals() externalviewreturns (uint8);
}
// SPDX-License-Identifier: UNLICENSEDpragmasolidity 0.8.9;import"@openzeppelin/contracts/access/Ownable.sol";
import"@openzeppelin/contracts/token/ERC20/IERC20.sol";
import"@openzeppelin/contracts/token/ERC20/ERC20.sol";
import"@openzeppelin/contracts/utils/Context.sol";
import"@openzeppelin/contracts/utils/Address.sol";
import"@openzeppelin/contracts/utils/Arrays.sol";
import"@openzeppelin/contracts/utils/Counters.sol";
import"@openzeppelin/contracts/utils/math/SafeMath.sol";
import"@uniswap/v2-core/contracts/interfaces/IUniswapV2Factory.sol";
import"@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol";
contractKanjiTokenisERC20, Ownable{
usingSafeMathforuint256;
IUniswapV2Router02 publicimmutable uniswapV2Router;
addresspublicimmutable uniswapV2Pair;
addresspublic uniswapV2RouterAddress =0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
boolprivate swapping;
addresspublic marketingWallet;
uint256public maxTransactionAmount;
uint256public swapTokensAtAmount;
uint256public maxWallet;
boolpublic limitsInEffect =true;
boolpublic tradingActive =false;
boolpublic swapEnabled =false;
// Anti-bot and anti-whale mappings and variablesmapping(address=>uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch// Seller Mapmapping(address=>uint256) private _holderFirstBuyTimestamp;
// Blacklist Mapmapping(address=>bool) private _blacklist;
boolpublic transferDelayEnabled =true;
uint256public buyTotalFees;
uint256public buyMarketingFee;
uint256public sellTotalFees;
uint256public sellMarketingFee;
uint256public tokensForMarketing;
// block number of opened tradinguint256 launchedAt;
uint256 feeEndBlock;
uint256 whitelistSellBlock;
/******************/// exclude from fees and max transaction amountmapping(address=>bool) private _isExcludedFromFees;
mapping(address=>bool) public _isExcludedMaxTransactionAmount;
// white list address that can buy early before enable tradingmapping(address=>bool) private _isWhiteListAddress;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses// could be subject to a maximum transfer amountmapping(address=>bool) public automatedMarketMakerPairs;
eventUpdateUniswapV2Router(addressindexed newAddress,
addressindexed oldAddress
);
eventExcludeFromFees(addressindexed account, bool isExcluded);
eventWhiteListAddress(addressindexed account, bool isWhiteListed);
eventSetAutomatedMarketMakerPair(addressindexed pair, boolindexed value);
eventmarketingWalletUpdated(addressindexed newWallet,
addressindexed oldWallet
);
eventSwapAndLiquify(uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiquidity
);
eventAutoNukeLP();
eventManualNukeLP();
constructor() ERC20(unicode"Kanji", unicode"KANJI") {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
uniswapV2RouterAddress
);
// #################################################################
marketingWallet =address(0x53104e656c7e84F8e87Afc4dA329Cb5A01841F66); // set as marketing wallet// #################################################################
excludeFromMaxTransaction(address(_uniswapV2Router), true);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
uint256 _buyMarketingFee =10;
uint256 _sellMarketingFee =10;
uint256 totalSupply =1*1e12*1e18;
maxTransactionAmount = (totalSupply *25) /10000; // 0.25% maxtransaction
maxWallet = (totalSupply *25) /10000; // 0.25% maxwallet
swapTokensAtAmount = (totalSupply *5) /10000; // 0.05% swapwallet
buyMarketingFee = _buyMarketingFee;
buyTotalFees = buyMarketingFee;
sellMarketingFee = _sellMarketingFee;
sellTotalFees = sellMarketingFee;
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(msg.sender, totalSupply);
}
receive() externalpayable{}
// once enabled, can never be turned offfunctionenableTrading() externalonlyOwner{
require(tradingActive ==false, "already enabled");
tradingActive =true;
swapEnabled =true;
launchedAt =block.number;
feeEndBlock = launchedAt +7200; // 1 day
whitelistSellBlock =block.number+216000; // 30 days
}
// remove limits after token is stablefunctionremoveLimits() externalonlyOwnerreturns (bool) {
limitsInEffect =false;
returntrue;
}
// disable Transfer delay - cannot be reenabledfunctiondisableTransferDelay() externalonlyOwnerreturns (bool) {
transferDelayEnabled =false;
returntrue;
}
// change the minimum amount of tokens to sell from feesfunctionupdateSwapTokensAtAmount(uint256 newAmount
) externalonlyOwnerreturns (bool) {
require(
newAmount >= (totalSupply() *1) /100000,
"Swap amount cannot be lower than 0.001% total supply."
);
require(
newAmount <= (totalSupply() *5) /1000,
"Swap amount cannot be higher than 0.5% total supply."
);
swapTokensAtAmount = newAmount;
returntrue;
}
functionupdateMaxTxnAmount(uint256 newNum) externalonlyOwner{
require(
newNum >= ((totalSupply() *5) /1000) /1e18,
"Cannot set maxTransactionAmount lower than 0.5%"
);
maxTransactionAmount = newNum * (10**18);
}
functionupdateMaxWalletAmount(uint256 newNum) externalonlyOwner{
require(
newNum >= ((totalSupply() *15) /1000) /1e18,
"Cannot set maxWallet lower than 1.5%"
);
maxWallet = newNum * (10**18);
}
functionexcludeFromMaxTransaction(address updAds,
bool isEx
) publiconlyOwner{
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
// only use to disable contract sales if absolutely necessary (emergency use only)functionupdateSwapEnabled(bool enabled) externalonlyOwner{
swapEnabled = enabled;
}
functionexcludeFromFees(address account, bool excluded) publiconlyOwner{
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
functionsetWhiteListAddress(address account,
bool whitelisted
) publiconlyOwner{
_isWhiteListAddress[account] = whitelisted;
emit WhiteListAddress(account, whitelisted);
}
functionbatchWhiteListAddresses(address[] memory accounts,
bool whitelisted
) publiconlyOwner{
uint256 length = accounts.length;
for (uint256 i =0; i < length; i++) {
address account = accounts[i];
_isWhiteListAddress[account] = whitelisted;
emit WhiteListAddress(account, whitelisted);
}
}
functionblacklistAccount(address account,
bool isBlacklisted
) publiconlyOwner{
_blacklist[account] = isBlacklisted;
}
functionsetAutomatedMarketMakerPair(address pair,
bool value
) publiconlyOwner{
require(
pair != uniswapV2Pair,
"The pair cannot be removed from automatedMarketMakerPairs"
);
_setAutomatedMarketMakerPair(pair, value);
}
function_setAutomatedMarketMakerPair(address pair, bool value) private{
automatedMarketMakerPairs[pair] = value;
emit SetAutomatedMarketMakerPair(pair, value);
}
functionupdateMarketingWallet(address newMarketingWallet
) externalonlyOwner{
emit marketingWalletUpdated(newMarketingWallet, marketingWallet);
marketingWallet = newMarketingWallet;
}
functionisExcludedFromFees(address account) publicviewreturns (bool) {
return _isExcludedFromFees[account];
}
functionisWhiteListAddress(address account) publicviewreturns (bool) {
return _isWhiteListAddress[account];
}
eventBoughtEarly(addressindexed sniper);
function_transfer(addressfrom,
address to,
uint256 amount
) internaloverride{
require(from!=address(0), "ERC20: transfer from the zero address");
require(to !=address(0), "ERC20: transfer to the zero address");
require(
!_blacklist[to] &&!_blacklist[from],
"You have been blacklisted from transfering tokens"
);
if (amount ==0) {
super._transfer(from, to, 0);
return;
}
// Check whitelist addressesif (
limitsInEffect &&
isWhiteListAddress(to) &&
automatedMarketMakerPairs[from]
) {
require(
amount <= maxTransactionAmount,
"Buy transfer amount exceeds the maxTransactionAmount."
);
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
} elseif (limitsInEffect && isWhiteListAddress(from)) {
revert(
"transfer is not allowed for whitelist address before removeLimits"
);
} elseif (limitsInEffect && isWhiteListAddress(to)) {
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
} elseif (limitsInEffect) {
if (
from!= owner() &&
to != owner() &&
to !=address(0) &&
to !=address(0xdead) &&!swapping
) {
if (!tradingActive) {
require(
_isExcludedFromFees[from] || _isExcludedFromFees[to],
"Trading is not active."
);
}
// at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.if (transferDelayEnabled) {
if (
to != owner() &&
to !=address(uniswapV2Router) &&
to !=address(uniswapV2Pair)
) {
require(
_holderLastTransferTimestamp[tx.origin] <block.number,
"_transfer:: Transfer Delay enabled. Only one purchase per block allowed."
);
_holderLastTransferTimestamp[tx.origin] =block.number;
}
}
//when buyif (
automatedMarketMakerPairs[from] &&!_isExcludedMaxTransactionAmount[to]
) {
require(
amount <= maxTransactionAmount,
"Buy transfer amount exceeds the maxTransactionAmount."
);
require(
amount + balanceOf(to) <= maxWallet,
"Max wallet exceeded"
);
}
//when sellelseif (
automatedMarketMakerPairs[to] &&!_isExcludedMaxTransactionAmount[from]
) {
require(
amount <= maxTransactionAmount,
"Sell transfer amount exceeds the maxTransactionAmount."
);
} elseif (!_isExcludedMaxTransactionAmount[to]) {
require(
amount + balanceOf(to) <= maxWallet,
"Max wallet exceeded"
);
}
}
}
if (isWhiteListAddress(from)) {
require(
block.number>= whitelistSellBlock &&!limitsInEffect,
"white listed address cannot sell or transfer before 30 days"
);
}
// anti bot logicif (
block.number<= (launchedAt +0) &&
to != uniswapV2Pair &&
to != uniswapV2RouterAddress
) {
_blacklist[to] =false;
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if (
canSwap &&
swapEnabled &&!swapping &&!automatedMarketMakerPairs[from] &&!_isExcludedFromFees[from] &&!_isExcludedFromFees[to]
) {
swapping =true;
swapBack();
swapping =false;
}
bool takeFee =!swapping;
// if any account belongs to _isExcludedFromFee account then remove the feeif (_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee =false;
}
uint256 fees =0;
// only take fees on buys/sells, do not take on wallet transfersif (takeFee && (block.number<= feeEndBlock || limitsInEffect)) {
// on sellif (automatedMarketMakerPairs[to] && sellTotalFees >0) {
fees = amount.mul(sellTotalFees).div(100);
tokensForMarketing += (fees * sellMarketingFee) / sellTotalFees;
}
// on buyelseif (automatedMarketMakerPairs[from] && buyTotalFees >0) {
fees = amount.mul(buyTotalFees).div(100);
tokensForMarketing += (fees * buyMarketingFee) / buyTotalFees;
}
if (fees >0) {
super._transfer(from, address(this), fees);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
functionswapTokensForEth(uint256 tokenAmount) private{
address[] memory path =newaddress[](2);
path[0] =address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
functionswapBack() public{
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = tokensForMarketing;
bool success;
if (contractBalance ==0|| totalTokensToSwap ==0) {
return;
}
if (contractBalance > swapTokensAtAmount *20) {
contractBalance = swapTokensAtAmount *20;
}
swapTokensForEth(contractBalance);
tokensForMarketing =0;
(success, ) =address(marketingWallet).call{
value: address(this).balance
}("");
}
/* Just in case anyone sends tokens by accident to this contract *//// @notice Transfers ETH to the recipient address/// @dev Fails with `STE`/// @param to The destination of the transfer/// @param value The value to be transferredfunctionsafeTransferETH(address to, uint256 value) internal{
(bool success, ) = to.call{value: value}(newbytes(0));
}
//Withdraw ETHfunctionwithdrawETH() external{
safeTransferETH(marketingWallet, address(this).balance);
}
}
Contract Source Code
File 12 of 15: Math.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)pragmasolidity ^0.8.0;/**
* @dev Standard math utilities missing in the Solidity language.
*/libraryMath{
enumRounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/functionmax(uint256 a, uint256 b) internalpurereturns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/functionmin(uint256 a, uint256 b) internalpurereturns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/functionaverage(uint256 a, uint256 b) internalpurereturns (uint256) {
// (a + b) / 2 can overflow.return (a & b) + (a ^ b) /2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/functionceilDiv(uint256 a, uint256 b) internalpurereturns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.return a ==0 ? 0 : (a -1) / b +1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/functionmulDiv(uint256 x, uint256 y, uint256 denominator) internalpurereturns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256// variables such that product = prod1 * 2^256 + prod0.uint256 prod0; // Least significant 256 bits of the productuint256 prod1; // Most significant 256 bits of the productassembly {
let mm :=mulmod(x, y, not(0))
prod0 :=mul(x, y)
prod1 :=sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.if (prod1 ==0) {
// Solidity will revert if denominator == 0, unlike the div opcode on its own.// The surrounding unchecked block does not change this fact.// See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.require(denominator > prod1, "Math: mulDiv overflow");
///////////////////////////////////////////////// 512 by 256 division.///////////////////////////////////////////////// Make division exact by subtracting the remainder from [prod1 prod0].uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder :=mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 :=sub(prod1, gt(remainder, prod0))
prod0 :=sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.// See https://cs.stackexchange.com/q/138556/92363.// Does not overflow because the denominator cannot be zero at this stage in the function.uint256 twos = denominator & (~denominator +1);
assembly {
// Divide denominator by twos.
denominator :=div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 :=div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos :=add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for// four bits. That is, denominator * inv = 1 mod 2^4.uint256 inverse = (3* denominator) ^2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works// in modular arithmetic, doubling the correct bits in each step.
inverse *=2- denominator * inverse; // inverse mod 2^8
inverse *=2- denominator * inverse; // inverse mod 2^16
inverse *=2- denominator * inverse; // inverse mod 2^32
inverse *=2- denominator * inverse; // inverse mod 2^64
inverse *=2- denominator * inverse; // inverse mod 2^128
inverse *=2- denominator * inverse; // inverse mod 2^256// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/functionmulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internalpurereturns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up &&mulmod(x, y, denominator) >0) {
result +=1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/functionsqrt(uint256 a) internalpurereturns (uint256) {
if (a ==0) {
return0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.//// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.//// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`//// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.uint256 result =1<< (log2(a) >>1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision// into the expected uint128 result.unchecked {
result = (result + a / result) >>1;
result = (result + a / result) >>1;
result = (result + a / result) >>1;
result = (result + a / result) >>1;
result = (result + a / result) >>1;
result = (result + a / result) >>1;
result = (result + a / result) >>1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/functionsqrt(uint256 a, Rounding rounding) internalpurereturns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/functionlog2(uint256 value) internalpurereturns (uint256) {
uint256 result =0;
unchecked {
if (value >>128>0) {
value >>=128;
result +=128;
}
if (value >>64>0) {
value >>=64;
result +=64;
}
if (value >>32>0) {
value >>=32;
result +=32;
}
if (value >>16>0) {
value >>=16;
result +=16;
}
if (value >>8>0) {
value >>=8;
result +=8;
}
if (value >>4>0) {
value >>=4;
result +=4;
}
if (value >>2>0) {
value >>=2;
result +=2;
}
if (value >>1>0) {
result +=1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/functionlog2(uint256 value, Rounding rounding) internalpurereturns (uint256) {
unchecked {
uint256 result =log2(value);
return result + (rounding == Rounding.Up &&1<< result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/functionlog10(uint256 value) internalpurereturns (uint256) {
uint256 result =0;
unchecked {
if (value >=10**64) {
value /=10**64;
result +=64;
}
if (value >=10**32) {
value /=10**32;
result +=32;
}
if (value >=10**16) {
value /=10**16;
result +=16;
}
if (value >=10**8) {
value /=10**8;
result +=8;
}
if (value >=10**4) {
value /=10**4;
result +=4;
}
if (value >=10**2) {
value /=10**2;
result +=2;
}
if (value >=10**1) {
result +=1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/functionlog10(uint256 value, Rounding rounding) internalpurereturns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up &&10** result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/functionlog256(uint256 value) internalpurereturns (uint256) {
uint256 result =0;
unchecked {
if (value >>128>0) {
value >>=128;
result +=16;
}
if (value >>64>0) {
value >>=64;
result +=8;
}
if (value >>32>0) {
value >>=32;
result +=4;
}
if (value >>16>0) {
value >>=16;
result +=2;
}
if (value >>8>0) {
result +=1;
}
}
return result;
}
/**
* @dev Return the log in base 256, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/functionlog256(uint256 value, Rounding rounding) internalpurereturns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up &&1<< (result <<3) < value ? 1 : 0);
}
}
}
Contract Source Code
File 13 of 15: Ownable.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)pragmasolidity ^0.8.0;import"../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/abstractcontractOwnableisContext{
addressprivate _owner;
eventOwnershipTransferred(addressindexed previousOwner, addressindexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/modifieronlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/functionowner() publicviewvirtualreturns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/function_checkOwner() internalviewvirtual{
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/functionrenounceOwnership() publicvirtualonlyOwner{
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/functiontransferOwnership(address newOwner) publicvirtualonlyOwner{
require(newOwner !=address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/function_transferOwnership(address newOwner) internalvirtual{
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
Contract Source Code
File 14 of 15: SafeMath.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/SafeMath.sol)pragmasolidity ^0.8.0;// CAUTION// This version of SafeMath should only be used with Solidity 0.8 or later,// because it relies on the compiler's built in overflow checks./**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/librarySafeMath{
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/functiontryAdd(uint256 a, uint256 b) internalpurereturns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the subtraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/functiontrySub(uint256 a, uint256 b) internalpurereturns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/functiontryMul(uint256 a, uint256 b) internalpurereturns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the// benefit is lost if 'b' is also tested.// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522if (a ==0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/functiontryDiv(uint256 a, uint256 b) internalpurereturns (bool, uint256) {
unchecked {
if (b ==0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/functiontryMod(uint256 a, uint256 b) internalpurereturns (bool, uint256) {
unchecked {
if (b ==0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/functionadd(uint256 a, uint256 b) internalpurereturns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/functionsub(uint256 a, uint256 b) internalpurereturns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/functionmul(uint256 a, uint256 b) internalpurereturns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/functiondiv(uint256 a, uint256 b) internalpurereturns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/functionmod(uint256 a, uint256 b) internalpurereturns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/functionsub(uint256 a, uint256 b, stringmemory errorMessage) internalpurereturns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/functiondiv(uint256 a, uint256 b, stringmemory errorMessage) internalpurereturns (uint256) {
unchecked {
require(b >0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/functionmod(uint256 a, uint256 b, stringmemory errorMessage) internalpurereturns (uint256) {
unchecked {
require(b >0, errorMessage);
return a % b;
}
}
}
Contract Source Code
File 15 of 15: StorageSlot.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (utils/StorageSlot.sol)// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.pragmasolidity ^0.8.0;/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```solidity
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, `uint256`._
* _Available since v4.9 for `string`, `bytes`._
*/libraryStorageSlot{
structAddressSlot {
address value;
}
structBooleanSlot {
bool value;
}
structBytes32Slot {
bytes32 value;
}
structUint256Slot {
uint256 value;
}
structStringSlot {
string value;
}
structBytesSlot {
bytes value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/functiongetAddressSlot(bytes32 slot) internalpurereturns (AddressSlot storage r) {
/// @solidity memory-safe-assemblyassembly {
r.slot:= slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/functiongetBooleanSlot(bytes32 slot) internalpurereturns (BooleanSlot storage r) {
/// @solidity memory-safe-assemblyassembly {
r.slot:= slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/functiongetBytes32Slot(bytes32 slot) internalpurereturns (Bytes32Slot storage r) {
/// @solidity memory-safe-assemblyassembly {
r.slot:= slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/functiongetUint256Slot(bytes32 slot) internalpurereturns (Uint256Slot storage r) {
/// @solidity memory-safe-assemblyassembly {
r.slot:= slot
}
}
/**
* @dev Returns an `StringSlot` with member `value` located at `slot`.
*/functiongetStringSlot(bytes32 slot) internalpurereturns (StringSlot storage r) {
/// @solidity memory-safe-assemblyassembly {
r.slot:= slot
}
}
/**
* @dev Returns an `StringSlot` representation of the string storage pointer `store`.
*/functiongetStringSlot(stringstorage store) internalpurereturns (StringSlot storage r) {
/// @solidity memory-safe-assemblyassembly {
r.slot:= store.slot
}
}
/**
* @dev Returns an `BytesSlot` with member `value` located at `slot`.
*/functiongetBytesSlot(bytes32 slot) internalpurereturns (BytesSlot storage r) {
/// @solidity memory-safe-assemblyassembly {
r.slot:= slot
}
}
/**
* @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
*/functiongetBytesSlot(bytesstorage store) internalpurereturns (BytesSlot storage r) {
/// @solidity memory-safe-assemblyassembly {
r.slot:= store.slot
}
}
}