CULTIVATE | STOCKPILE

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

address constant CANONICAL_OPERATOR_FILTER_REGISTRY_ADDRESS = 0x000000000000AAeB6D7670E522A718067333cd4E;
address constant CANONICAL_CORI_SUBSCRIPTION = 0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6;

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC1155/ERC1155.sol)

pragma solidity ^0.8.0;

import "./IERC1155.sol";
import "./IERC1155Receiver.sol";
import "./extensions/IERC1155MetadataURI.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of the basic standard multi-token.
 * See https://eips.ethereum.org/EIPS/eip-1155
 * Originally based on code by Enjin: https://github.com/enjin/erc-1155
 *
 * _Available since v3.1._
 */
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
    using Address for address;

    // Mapping from token ID to account balances
    mapping(uint256 => mapping(address => uint256)) private _balances;

    // Mapping from account to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
    string private _uri;

    /**
     * @dev See {_setURI}.
     */
    constructor(string memory uri_) {
        _setURI(uri_);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC1155).interfaceId ||
            interfaceId == type(IERC1155MetadataURI).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\{id\}` substring with the
     * actual token type ID.
     */
    function uri(uint256) public view virtual override returns (string memory) {
        return _uri;
    }

    /**
     * @dev See {IERC1155-balanceOf}.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
        require(account != address(0), "ERC1155: address zero is not a valid owner");
        return _balances[id][account];
    }

    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
        public
        view
        virtual
        override
        returns (uint256[] memory)
    {
        require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");

        uint256[] memory batchBalances = new uint256[](accounts.length);

        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts[i], ids[i]);
        }

        return batchBalances;
    }

    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[account][operator];
    }

    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not token owner or approved"
        );
        _safeTransferFrom(from, to, id, amount, data);
    }

    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not token owner or approved"
        );
        _safeBatchTransferFrom(from, to, ids, amounts, data);
    }

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }
        _balances[id][to] += amount;

        emit TransferSingle(operator, from, to, id, amount);

        _afterTokenTransfer(operator, from, to, ids, amounts, data);

        _doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
            _balances[id][to] += amount;
        }

        emit TransferBatch(operator, from, to, ids, amounts);

        _afterTokenTransfer(operator, from, to, ids, amounts, data);

        _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
    }

    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\{id\}` substring in either the
     * URI or any of the amounts in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\{id\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        _uri = newuri;
    }

    /**
     * @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        _balances[id][to] += amount;
        emit TransferSingle(operator, address(0), to, id, amount);

        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);

        _doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _mintBatch(
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; i++) {
            _balances[ids[i]][to] += amounts[i];
        }

        emit TransferBatch(operator, address(0), to, ids, amounts);

        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);

        _doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
    }

    /**
     * @dev Destroys `amount` tokens of token type `id` from `from`
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `amount` tokens of token type `id`.
     */
    function _burn(
        address from,
        uint256 id,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }

        emit TransferSingle(operator, from, address(0), id, amount);

        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     */
    function _burnBatch(
        address from,
        uint256[] memory ids,
        uint256[] memory amounts
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        for (uint256 i = 0; i < ids.length; i++) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
        }

        emit TransferBatch(operator, from, address(0), ids, amounts);

        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC1155: setting approval status for self");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `ids` and `amounts` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    /**
     * @dev Hook that is called after any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
                if (response != IERC1155Receiver.onERC1155Received.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non-ERC1155Receiver implementer");
            }
        }
    }

    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non-ERC1155Receiver implementer");
            }
        }
    }

    function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
        uint256[] memory array = new uint256[](1);
        array[0] = element;

        return array;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC1155/extensions/ERC1155Supply.sol)

pragma solidity ^0.8.0;

import "../ERC1155.sol";

/**
 * @dev Extension of ERC1155 that adds tracking of total supply per id.
 *
 * Useful for scenarios where Fungible and Non-fungible tokens have to be
 * clearly identified. Note: While a totalSupply of 1 might mean the
 * corresponding is an NFT, there is no guarantees that no other token with the
 * same id are not going to be minted.
 */
abstract contract ERC1155Supply is ERC1155 {
    mapping(uint256 => uint256) private _totalSupply;

    /**
     * @dev Total amount of tokens in with a given id.
     */
    function totalSupply(uint256 id) public view virtual returns (uint256) {
        return _totalSupply[id];
    }

    /**
     * @dev Indicates whether any token exist with a given id, or not.
     */
    function exists(uint256 id) public view virtual returns (bool) {
        return ERC1155Supply.totalSupply(id) > 0;
    }

    /**
     * @dev See {ERC1155-_beforeTokenTransfer}.
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual override {
        super._beforeTokenTransfer(operator, from, to, ids, amounts, data);

        if (from == address(0)) {
            for (uint256 i = 0; i < ids.length; ++i) {
                _totalSupply[ids[i]] += amounts[i];
            }
        }

        if (to == address(0)) {
            for (uint256 i = 0; i < ids.length; ++i) {
                uint256 id = ids[i];
                uint256 amount = amounts[i];
                uint256 supply = _totalSupply[id];
                require(supply >= amount, "ERC1155: burn amount exceeds totalSupply");
                unchecked {
                    _totalSupply[id] = supply - amount;
                }
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// Creator: twitter.com/0xNox_ETH

pragma solidity ^0.8.17;

interface IClaimable {
    function mintClaim(address to, uint256 tokenId, uint256 count) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC1155/IERC1155.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)

pragma solidity ^0.8.0;

import "../IERC1155.sol";

/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155MetadataURI is IERC1155 {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\{id\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

interface IOperatorFilterRegistry {
    /**
     * @notice Returns true if operator is not filtered for a given token, either by address or codeHash. Also returns
     *         true if supplied registrant address is not registered.
     */
    function isOperatorAllowed(address registrant, address operator) external view returns (bool);

    /**
     * @notice Registers an address with the registry. May be called by address itself or by EIP-173 owner.
     */
    function register(address registrant) external;

    /**
     * @notice Registers an address with the registry and "subscribes" to another address's filtered operators and codeHashes.
     */
    function registerAndSubscribe(address registrant, address subscription) external;

    /**
     * @notice Registers an address with the registry and copies the filtered operators and codeHashes from another
     *         address without subscribing.
     */
    function registerAndCopyEntries(address registrant, address registrantToCopy) external;

    /**
     * @notice Unregisters an address with the registry and removes its subscription. May be called by address itself or by EIP-173 owner.
     *         Note that this does not remove any filtered addresses or codeHashes.
     *         Also note that any subscriptions to this registrant will still be active and follow the existing filtered addresses and codehashes.
     */
    function unregister(address addr) external;

    /**
     * @notice Update an operator address for a registered address - when filtered is true, the operator is filtered.
     */
    function updateOperator(address registrant, address operator, bool filtered) external;

    /**
     * @notice Update multiple operators for a registered address - when filtered is true, the operators will be filtered. Reverts on duplicates.
     */
    function updateOperators(address registrant, address[] calldata operators, bool filtered) external;

    /**
     * @notice Update a codeHash for a registered address - when filtered is true, the codeHash is filtered.
     */
    function updateCodeHash(address registrant, bytes32 codehash, bool filtered) external;

    /**
     * @notice Update multiple codeHashes for a registered address - when filtered is true, the codeHashes will be filtered. Reverts on duplicates.
     */
    function updateCodeHashes(address registrant, bytes32[] calldata codeHashes, bool filtered) external;

    /**
     * @notice Subscribe an address to another registrant's filtered operators and codeHashes. Will remove previous
     *         subscription if present.
     *         Note that accounts with subscriptions may go on to subscribe to other accounts - in this case,
     *         subscriptions will not be forwarded. Instead the former subscription's existing entries will still be
     *         used.
     */
    function subscribe(address registrant, address registrantToSubscribe) external;

    /**
     * @notice Unsubscribe an address from its current subscribed registrant, and optionally copy its filtered operators and codeHashes.
     */
    function unsubscribe(address registrant, bool copyExistingEntries) external;

    /**
     * @notice Get the subscription address of a given registrant, if any.
     */
    function subscriptionOf(address addr) external returns (address registrant);

    /**
     * @notice Get the set of addresses subscribed to a given registrant.
     *         Note that order is not guaranteed as updates are made.
     */
    function subscribers(address registrant) external returns (address[] memory);

    /**
     * @notice Get the subscriber at a given index in the set of addresses subscribed to a given registrant.
     *         Note that order is not guaranteed as updates are made.
     */
    function subscriberAt(address registrant, uint256 index) external returns (address);

    /**
     * @notice Copy filtered operators and codeHashes from a different registrantToCopy to addr.
     */
    function copyEntriesOf(address registrant, address registrantToCopy) external;

    /**
     * @notice Returns true if operator is filtered by a given address or its subscription.
     */
    function isOperatorFiltered(address registrant, address operator) external returns (bool);

    /**
     * @notice Returns true if the hash of an address's code is filtered by a given address or its subscription.
     */
    function isCodeHashOfFiltered(address registrant, address operatorWithCode) external returns (bool);

    /**
     * @notice Returns true if a codeHash is filtered by a given address or its subscription.
     */
    function isCodeHashFiltered(address registrant, bytes32 codeHash) external returns (bool);

    /**
     * @notice Returns a list of filtered operators for a given address or its subscription.
     */
    function filteredOperators(address addr) external returns (address[] memory);

    /**
     * @notice Returns the set of filtered codeHashes for a given address or its subscription.
     *         Note that order is not guaranteed as updates are made.
     */
    function filteredCodeHashes(address addr) external returns (bytes32[] memory);

    /**
     * @notice Returns the filtered operator at the given index of the set of filtered operators for a given address or
     *         its subscription.
     *         Note that order is not guaranteed as updates are made.
     */
    function filteredOperatorAt(address registrant, uint256 index) external returns (address);

    /**
     * @notice Returns the filtered codeHash at the given index of the list of filtered codeHashes for a given address or
     *         its subscription.
     *         Note that order is not guaranteed as updates are made.
     */
    function filteredCodeHashAt(address registrant, uint256 index) external returns (bytes32);

    /**
     * @notice Returns true if an address has registered
     */
    function isRegistered(address addr) external returns (bool);

    /**
     * @dev Convenience method to compute the code hash of an arbitrary contract
     */
    function codeHashOf(address addr) external returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {RevokableOperatorFilterer} from "./RevokableOperatorFilterer.sol";
import {CANONICAL_CORI_SUBSCRIPTION, CANONICAL_OPERATOR_FILTER_REGISTRY_ADDRESS} from "./lib/Constants.sol";
/**
 * @title  RevokableDefaultOperatorFilterer
 * @notice Inherits from RevokableOperatorFilterer and automatically subscribes to the default OpenSea subscription.
 *         Note that OpenSea will disable creator earnings enforcement if filtered operators begin fulfilling orders
 *         on-chain, eg, if the registry is revoked or bypassed.
 */

abstract contract RevokableDefaultOperatorFilterer is RevokableOperatorFilterer {
    /// @dev The constructor that is called when the contract is being deployed.
    constructor()
        RevokableOperatorFilterer(CANONICAL_OPERATOR_FILTER_REGISTRY_ADDRESS, CANONICAL_CORI_SUBSCRIPTION, true)
    {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {UpdatableOperatorFilterer} from "./UpdatableOperatorFilterer.sol";
import {IOperatorFilterRegistry} from "./IOperatorFilterRegistry.sol";

/**
 * @title  RevokableOperatorFilterer
 * @notice This contract is meant to allow contracts to permanently skip OperatorFilterRegistry checks if desired. The
 *         Registry itself has an "unregister" function, but if the contract is ownable, the owner can re-register at
 *         any point. As implemented, this abstract contract allows the contract owner to permanently skip the
 *         OperatorFilterRegistry checks by calling revokeOperatorFilterRegistry. Once done, the registry
 *         address cannot be further updated.
 *         Note that OpenSea will still disable creator earnings enforcement if filtered operators begin fulfilling orders
 *         on-chain, eg, if the registry is revoked or bypassed.
 */
abstract contract RevokableOperatorFilterer is UpdatableOperatorFilterer {
    /// @dev Emitted when the registry has already been revoked.
    error RegistryHasBeenRevoked();
    /// @dev Emitted when the initial registry address is attempted to be set to the zero address.
    error InitialRegistryAddressCannotBeZeroAddress();

    event OperatorFilterRegistryRevoked();

    bool public isOperatorFilterRegistryRevoked;

    /// @dev The constructor that is called when the contract is being deployed.
    constructor(address _registry, address subscriptionOrRegistrantToCopy, bool subscribe)
        UpdatableOperatorFilterer(_registry, subscriptionOrRegistrantToCopy, subscribe)
    {
        // don't allow creating a contract with a permanently revoked registry
        if (_registry == address(0)) {
            revert InitialRegistryAddressCannotBeZeroAddress();
        }
    }

    /**
     * @notice Update the address that the contract will make OperatorFilter checks against. When set to the zero
     *         address, checks will be permanently bypassed, and the address cannot be updated again. OnlyOwner.
     */
    function updateOperatorFilterRegistryAddress(address newRegistry) public override {
        if (msg.sender != owner()) {
            revert OnlyOwner();
        }
        // if registry has been revoked, do not allow further updates
        if (isOperatorFilterRegistryRevoked) {
            revert RegistryHasBeenRevoked();
        }

        operatorFilterRegistry = IOperatorFilterRegistry(newRegistry);
        emit OperatorFilterRegistryAddressUpdated(newRegistry);
    }

    /**
     * @notice Revoke the OperatorFilterRegistry address, permanently bypassing checks. OnlyOwner.
     */
    function revokeOperatorFilterRegistry() public {
        if (msg.sender != owner()) {
            revert OnlyOwner();
        }
        // if registry has been revoked, do not allow further updates
        if (isOperatorFilterRegistryRevoked) {
            revert RegistryHasBeenRevoked();
        }

        // set to zero address to bypass checks
        operatorFilterRegistry = IOperatorFilterRegistry(address(0));
        isOperatorFilterRegistryRevoked = true;
        emit OperatorFilterRegistryRevoked();
    }
}

// SPDX-License-Identifier: MIT
// Creator: twitter.com/0xNox_ETH

pragma solidity ^0.8.17;

import "./IClaimable.sol";
import "./Strings.sol";
import "./UpdatableOperatorFilterer.sol";
import "./RevokableDefaultOperatorFilterer.sol";
import "@openzeppelin/contracts/token/ERC1155/extensions/ERC1155Supply.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";

contract Stockpile is
    ERC1155Supply,
    RevokableDefaultOperatorFilterer,
    Ownable,
    ReentrancyGuard,
    IClaimable
{
    address private _airdropManagerContract;
    string private _baseTokenURI;
    string private _contractURI;
    address private _admin;
    mapping(address => bool) private _burnAuthorizedContracts;

    bool public contractPaused;

    constructor(
        string memory contractURI_,
        string memory baseTokenURI,
        address signatureKey,
        address admin
    ) ERC1155("") {
        _admin = admin;
        _signatureKey = signatureKey;
        _contractURI = contractURI_;
        _baseTokenURI = baseTokenURI;
    }

    modifier onlyOwnerOrAdmin() {
        require(msg.sender == owner() || msg.sender == _admin, "Not owner or admin");
        _;
    }

    function mintClaim(address to, uint256 tokenId, uint256 count) external override {
        require(msg.sender == _airdropManagerContract, "You cannot call this function");
        _mint(to, tokenId, count, "");
    }

    function uri(uint256 _id) public view virtual override returns (string memory) {
        return string.concat(_baseTokenURI, Strings.toString(_id));
    }

    function setAirdropManagerContract(address airdropManagerContract) external onlyOwnerOrAdmin {
        _airdropManagerContract = airdropManagerContract;
    }

    function mint(address to, uint256 tokenId, uint256 count) external onlyOwnerOrAdmin {
        _mint(to, tokenId, count, "");
    }

    function mintBatch(
        address[] calldata to,
        uint256 tokenId,
        uint256[] calldata counts
    ) external onlyOwnerOrAdmin {
        unchecked {
            for (uint256 i = 0; i < to.length; i++) {
                _mint(to[i], tokenId, counts[i], "");
            }
        }
    }

    function pauseContract(bool paused) external onlyOwnerOrAdmin {
        contractPaused = paused;
    }

    function setAdmin(address admin) external onlyOwner {
        _admin = admin;
    }

    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual override {
        super._beforeTokenTransfer(operator, from, to, ids, amounts, data);
        require(!contractPaused, "Contract is paused");
    }

    // Burn functions

    function burn(address from, uint256 id, uint256 amount) external virtual {
        require(
            _burnAuthorizedContracts[msg.sender] ||
                from == msg.sender ||
                isApprovedForAll(from, msg.sender),
            "ERC1155: caller is not token owner nor approved"
        );

        _burn(from, id, amount);
    }

    function burnBatch(
        address from,
        uint256[] memory ids,
        uint256[] memory amounts
    ) external virtual {
        require(
            _burnAuthorizedContracts[msg.sender] ||
                from == msg.sender ||
                isApprovedForAll(from, msg.sender),
            "ERC1155: caller is not token owner nor approved"
        );

        _burnBatch(from, ids, amounts);
    }

    function setBurnAuthorizedContract(
        address authorizedContract,
        bool isAuthorized
    ) external onlyOwnerOrAdmin {
        _burnAuthorizedContracts[authorizedContract] = isAuthorized;
    }

    // Claim logic
    address private _signatureKey;
    mapping(string => bool) private _usedNonces;

    function _claimTokens(
        address to,
        uint256 tokenId,
        uint256 amount,
        uint256 price,
        string calldata nonce,
        bytes memory signature
    ) private {
        require(!_usedNonces[nonce], "Nonce already used");

        bytes32 r;
        bytes32 s;
        uint8 v;
        assembly {
            r := mload(add(signature, 32))
            s := mload(add(signature, 64))
            v := byte(0, mload(add(signature, 96)))
        }
        bytes32 _hash = keccak256(
            abi.encodePacked(
                "\x19Ethereum Signed Message:\n32",
                keccak256(abi.encodePacked(to, tokenId, amount, price, nonce))
            )
        );
        require(ecrecover(_hash, v, r, s) == _signatureKey, "Invalid signature");

        // mint the tokens
        _usedNonces[nonce] = true;
        _mint(to, tokenId, amount, "");
    }

    function claimTokens(
        address to,
        uint256 tokenId,
        uint256 amount,
        uint256 price,
        string calldata nonce,
        bytes memory signature
    ) external payable nonReentrant {
        _claimTokens(to, tokenId, amount, price, nonce, signature);

        // check if the price is correct
        if (price > 0) {
            require(msg.value >= price, "Insufficient funds");
        }

        // refund excess ETH
        if (msg.value - price > 0.0001 ether) {
            payable(msg.sender).transfer(msg.value - price);
        }
    }

    function claimTokensBatch(
        address[] calldata to,
        uint256[] calldata tokenIds,
        uint256[] calldata amounts,
        uint256[] calldata prices,
        string[] calldata nonces,
        bytes[] memory signatures
    ) external payable nonReentrant {
        require(to.length == tokenIds.length, "Invalid input");
        require(to.length == amounts.length, "Invalid input");
        require(to.length == prices.length, "Invalid input");
        require(to.length == nonces.length, "Invalid input");
        require(to.length == signatures.length, "Invalid input");

        uint256 totalPrice = 0;
        for (uint256 i = 0; i < to.length; i++) {
            _claimTokens(to[i], tokenIds[i], amounts[i], prices[i], nonces[i], signatures[i]);
            totalPrice += prices[i];
        }

        // check if the price is correct
        if (totalPrice > 0) {
            require(msg.value >= totalPrice, "Insufficient funds");
        }

        // refund excess ETH
        if (msg.value - totalPrice > 0.0001 ether) {
            payable(msg.sender).transfer(msg.value - totalPrice);
        }
    }

    function areNoncesUsed(string[] calldata nonces) external view returns (bool[] memory) {
        bool[] memory isUsed = new bool[](nonces.length);
        for (uint256 i = 0; i < nonces.length; i++) {
            isUsed[i] = _usedNonces[nonces[i]];
        }
        return isUsed;
    }

    function setSignatureKey(address sigKey) external onlyOwnerOrAdmin {
        _signatureKey = sigKey;
    }

    function setContractURI(string calldata contractURI_) external onlyOwnerOrAdmin {
        _contractURI = contractURI_;
    }

    function setBaseTokenURI(string calldata baseTokenURI_) external onlyOwnerOrAdmin {
        _baseTokenURI = baseTokenURI_;
    }

    // OpenSea metadata initialization
    function contractURI() public view returns (string memory) {
        return _contractURI;
    }

    // OpenSea operator filtering
    function setApprovalForAll(
        address operator,
        bool approved
    ) public override onlyAllowedOperatorApproval(operator) {
        super.setApprovalForAll(operator, approved);
    }

    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        uint256 amount,
        bytes memory data
    ) public override onlyAllowedOperator(from) {
        super.safeTransferFrom(from, to, tokenId, amount, data);
    }

    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override onlyAllowedOperator(from) {
        super.safeBatchTransferFrom(from, to, ids, amounts, data);
    }

    function owner()
        public
        view
        virtual
        override(Ownable, UpdatableOperatorFilterer)
        returns (address)
    {
        return Ownable.owner();
    }

    // Withdraw ETH from contract
    function withdrawMoney(address to) external onlyOwnerOrAdmin {
        (bool success, ) = to.call{value: address(this).balance}("");
        require(success, "Transfer failed.");
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {IOperatorFilterRegistry} from "./IOperatorFilterRegistry.sol";

/**
 * @title  UpdatableOperatorFilterer
 * @notice Abstract contract whose constructor automatically registers and optionally subscribes to or copies another
 *         registrant's entries in the OperatorFilterRegistry. This contract allows the Owner to update the
 *         OperatorFilterRegistry address via updateOperatorFilterRegistryAddress, including to the zero address,
 *         which will bypass registry checks.
 *         Note that OpenSea will still disable creator earnings enforcement if filtered operators begin fulfilling orders
 *         on-chain, eg, if the registry is revoked or bypassed.
 * @dev    This smart contract is meant to be inherited by token contracts so they can use the following:
 *         - `onlyAllowedOperator` modifier for `transferFrom` and `safeTransferFrom` methods.
 *         - `onlyAllowedOperatorApproval` modifier for `approve` and `setApprovalForAll` methods.
 */
abstract contract UpdatableOperatorFilterer {
    /// @dev Emitted when an operator is not allowed.
    error OperatorNotAllowed(address operator);
    /// @dev Emitted when someone other than the owner is trying to call an only owner function.
    error OnlyOwner();

    event OperatorFilterRegistryAddressUpdated(address newRegistry);

    IOperatorFilterRegistry public operatorFilterRegistry;

    /// @dev The constructor that is called when the contract is being deployed.
    constructor(address _registry, address subscriptionOrRegistrantToCopy, bool subscribe) {
        IOperatorFilterRegistry registry = IOperatorFilterRegistry(_registry);
        operatorFilterRegistry = registry;
        // If an inheriting token contract is deployed to a network without the registry deployed, the modifier
        // will not revert, but the contract will need to be registered with the registry once it is deployed in
        // order for the modifier to filter addresses.
        if (address(registry).code.length > 0) {
            if (subscribe) {
                registry.registerAndSubscribe(address(this), subscriptionOrRegistrantToCopy);
            } else {
                if (subscriptionOrRegistrantToCopy != address(0)) {
                    registry.registerAndCopyEntries(address(this), subscriptionOrRegistrantToCopy);
                } else {
                    registry.register(address(this));
                }
            }
        }
    }

    /**
     * @dev A helper function to check if the operator is allowed.
     */
    modifier onlyAllowedOperator(address from) virtual {
        // Allow spending tokens from addresses with balance
        // Note that this still allows listings and marketplaces with escrow to transfer tokens if transferred
        // from an EOA.
        if (from != msg.sender) {
            _checkFilterOperator(msg.sender);
        }
        _;
    }

    /**
     * @dev A helper function to check if the operator approval is allowed.
     */
    modifier onlyAllowedOperatorApproval(address operator) virtual {
        _checkFilterOperator(operator);
        _;
    }

    /**
     * @notice Update the address that the contract will make OperatorFilter checks against. When set to the zero
     *         address, checks will be bypassed. OnlyOwner.
     */
    function updateOperatorFilterRegistryAddress(address newRegistry) public virtual {
        if (msg.sender != owner()) {
            revert OnlyOwner();
        }
        operatorFilterRegistry = IOperatorFilterRegistry(newRegistry);
        emit OperatorFilterRegistryAddressUpdated(newRegistry);
    }

    /**
     * @dev Assume the contract has an owner, but leave specific Ownable implementation up to inheriting contract.
     */
    function owner() public view virtual returns (address);

    /**
     * @dev A helper function to check if the operator is allowed.
     */
    function _checkFilterOperator(address operator) internal view virtual {
        IOperatorFilterRegistry registry = operatorFilterRegistry;
        // Check registry code length to facilitate testing in environments without a deployed registry.
        if (address(registry) != address(0) && address(registry).code.length > 0) {
            // under normal circumstances, this function will revert rather than return false, but inheriting contracts
            // may specify their own OperatorFilterRegistry implementations, which may behave differently
            if (!registry.isOperatorAllowed(address(this), operator)) {
                revert OperatorNotAllowed(operator);
            }
        }
    }
}

{
  "compilationTarget": {
    "contracts/Stockpile.sol": "Stockpile"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 600
  },
  "remappings": []
}