// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.9.0;

// ----------------------------------------------------------------------------
// BokkyPooBah's DateTime Library v1.01
//
// A gas-efficient Solidity date and time library
//
// https://github.com/bokkypoobah/BokkyPooBahsDateTimeLibrary
//
// Tested date range 1970/01/01 to 2345/12/31
//
// Conventions:
// Unit      | Range         | Notes
// :-------- |:-------------:|:-----
// timestamp | >= 0          | Unix timestamp, number of seconds since 1970/01/01 00:00:00 UTC
// year      | 1970 ... 2345 |
// month     | 1 ... 12      |
// day       | 1 ... 31      |
// hour      | 0 ... 23      |
// minute    | 0 ... 59      |
// second    | 0 ... 59      |
// dayOfWeek | 1 ... 7       | 1 = Monday, ..., 7 = Sunday
//
//
// Enjoy. (c) BokkyPooBah / Bok Consulting Pty Ltd 2018-2019. The MIT Licence.
// ----------------------------------------------------------------------------

library BokkyPooBahsDateTimeLibrary {

    uint constant SECONDS_PER_DAY = 24 * 60 * 60;
    uint constant SECONDS_PER_HOUR = 60 * 60;
    uint constant SECONDS_PER_MINUTE = 60;
    int constant OFFSET19700101 = 2440588;

    uint constant DOW_MON = 1;
    uint constant DOW_TUE = 2;
    uint constant DOW_WED = 3;
    uint constant DOW_THU = 4;
    uint constant DOW_FRI = 5;
    uint constant DOW_SAT = 6;
    uint constant DOW_SUN = 7;

    // ------------------------------------------------------------------------
    // Calculate the number of days from 1970/01/01 to year/month/day using
    // the date conversion algorithm from
    //   http://aa.usno.navy.mil/faq/docs/JD_Formula.php
    // and subtracting the offset 2440588 so that 1970/01/01 is day 0
    //
    // days = day
    //      - 32075
    //      + 1461 * (year + 4800 + (month - 14) / 12) / 4
    //      + 367 * (month - 2 - (month - 14) / 12 * 12) / 12
    //      - 3 * ((year + 4900 + (month - 14) / 12) / 100) / 4
    //      - offset
    // ------------------------------------------------------------------------
    function _daysFromDate(uint year, uint month, uint day) internal pure returns (uint _days) {
        require(year >= 1970);
        int _year = int(year);
        int _month = int(month);
        int _day = int(day);

        int __days = _day
          - 32075
          + 1461 * (_year + 4800 + (_month - 14) / 12) / 4
          + 367 * (_month - 2 - (_month - 14) / 12 * 12) / 12
          - 3 * ((_year + 4900 + (_month - 14) / 12) / 100) / 4
          - OFFSET19700101;

        _days = uint(__days);
    }

    // ------------------------------------------------------------------------
    // Calculate year/month/day from the number of days since 1970/01/01 using
    // the date conversion algorithm from
    //   http://aa.usno.navy.mil/faq/docs/JD_Formula.php
    // and adding the offset 2440588 so that 1970/01/01 is day 0
    //
    // int L = days + 68569 + offset
    // int N = 4 * L / 146097
    // L = L - (146097 * N + 3) / 4
    // year = 4000 * (L + 1) / 1461001
    // L = L - 1461 * year / 4 + 31
    // month = 80 * L / 2447
    // dd = L - 2447 * month / 80
    // L = month / 11
    // month = month + 2 - 12 * L
    // year = 100 * (N - 49) + year + L
    // ------------------------------------------------------------------------
    function _daysToDate(uint _days) internal pure returns (uint year, uint month, uint day) {
        int __days = int(_days);

        int L = __days + 68569 + OFFSET19700101;
        int N = 4 * L / 146097;
        L = L - (146097 * N + 3) / 4;
        int _year = 4000 * (L + 1) / 1461001;
        L = L - 1461 * _year / 4 + 31;
        int _month = 80 * L / 2447;
        int _day = L - 2447 * _month / 80;
        L = _month / 11;
        _month = _month + 2 - 12 * L;
        _year = 100 * (N - 49) + _year + L;

        year = uint(_year);
        month = uint(_month);
        day = uint(_day);
    }

    function timestampFromDate(uint year, uint month, uint day) internal pure returns (uint timestamp) {
        timestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY;
    }
    function timestampFromDateTime(uint year, uint month, uint day, uint hour, uint minute, uint second) internal pure returns (uint timestamp) {
        timestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY + hour * SECONDS_PER_HOUR + minute * SECONDS_PER_MINUTE + second;
    }
    function timestampToDate(uint timestamp) internal pure returns (uint year, uint month, uint day) {
        (year, month, day) = _daysToDate(timestamp / SECONDS_PER_DAY);
    }
    function timestampToDateTime(uint timestamp) internal pure returns (uint year, uint month, uint day, uint hour, uint minute, uint second) {
        (year, month, day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        uint secs = timestamp % SECONDS_PER_DAY;
        hour = secs / SECONDS_PER_HOUR;
        secs = secs % SECONDS_PER_HOUR;
        minute = secs / SECONDS_PER_MINUTE;
        second = secs % SECONDS_PER_MINUTE;
    }

    function isValidDate(uint year, uint month, uint day) internal pure returns (bool valid) {
        if (year >= 1970 && month > 0 && month <= 12) {
            uint daysInMonth = _getDaysInMonth(year, month);
            if (day > 0 && day <= daysInMonth) {
                valid = true;
            }
        }
    }
    function isValidDateTime(uint year, uint month, uint day, uint hour, uint minute, uint second) internal pure returns (bool valid) {
        if (isValidDate(year, month, day)) {
            if (hour < 24 && minute < 60 && second < 60) {
                valid = true;
            }
        }
    }
    function isLeapYear(uint timestamp) internal pure returns (bool leapYear) {
        (uint year,,) = _daysToDate(timestamp / SECONDS_PER_DAY);
        leapYear = _isLeapYear(year);
    }
    function _isLeapYear(uint year) internal pure returns (bool leapYear) {
        leapYear = ((year % 4 == 0) && (year % 100 != 0)) || (year % 400 == 0);
    }
    function isWeekDay(uint timestamp) internal pure returns (bool weekDay) {
        weekDay = getDayOfWeek(timestamp) <= DOW_FRI;
    }
    function isWeekEnd(uint timestamp) internal pure returns (bool weekEnd) {
        weekEnd = getDayOfWeek(timestamp) >= DOW_SAT;
    }
    function getDaysInMonth(uint timestamp) internal pure returns (uint daysInMonth) {
        (uint year, uint month,) = _daysToDate(timestamp / SECONDS_PER_DAY);
        daysInMonth = _getDaysInMonth(year, month);
    }
    function _getDaysInMonth(uint year, uint month) internal pure returns (uint daysInMonth) {
        if (month == 1 || month == 3 || month == 5 || month == 7 || month == 8 || month == 10 || month == 12) {
            daysInMonth = 31;
        } else if (month != 2) {
            daysInMonth = 30;
        } else {
            daysInMonth = _isLeapYear(year) ? 29 : 28;
        }
    }
    // 1 = Monday, 7 = Sunday
    function getDayOfWeek(uint timestamp) internal pure returns (uint dayOfWeek) {
        uint _days = timestamp / SECONDS_PER_DAY;
        dayOfWeek = (_days + 3) % 7 + 1;
    }

    function getYear(uint timestamp) internal pure returns (uint year) {
        (year,,) = _daysToDate(timestamp / SECONDS_PER_DAY);
    }
    function getMonth(uint timestamp) internal pure returns (uint month) {
        (,month,) = _daysToDate(timestamp / SECONDS_PER_DAY);
    }
    function getDay(uint timestamp) internal pure returns (uint day) {
        (,,day) = _daysToDate(timestamp / SECONDS_PER_DAY);
    }
    function getHour(uint timestamp) internal pure returns (uint hour) {
        uint secs = timestamp % SECONDS_PER_DAY;
        hour = secs / SECONDS_PER_HOUR;
    }
    function getMinute(uint timestamp) internal pure returns (uint minute) {
        uint secs = timestamp % SECONDS_PER_HOUR;
        minute = secs / SECONDS_PER_MINUTE;
    }
    function getSecond(uint timestamp) internal pure returns (uint second) {
        second = timestamp % SECONDS_PER_MINUTE;
    }

    function addYears(uint timestamp, uint _years) internal pure returns (uint newTimestamp) {
        (uint year, uint month, uint day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        year += _years;
        uint daysInMonth = _getDaysInMonth(year, month);
        if (day > daysInMonth) {
            day = daysInMonth;
        }
        newTimestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY + timestamp % SECONDS_PER_DAY;
        require(newTimestamp >= timestamp);
    }
    function addMonths(uint timestamp, uint _months) internal pure returns (uint newTimestamp) {
        (uint year, uint month, uint day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        month += _months;
        year += (month - 1) / 12;
        month = (month - 1) % 12 + 1;
        uint daysInMonth = _getDaysInMonth(year, month);
        if (day > daysInMonth) {
            day = daysInMonth;
        }
        newTimestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY + timestamp % SECONDS_PER_DAY;
        require(newTimestamp >= timestamp);
    }
    function addDays(uint timestamp, uint _days) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp + _days * SECONDS_PER_DAY;
        require(newTimestamp >= timestamp);
    }
    function addHours(uint timestamp, uint _hours) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp + _hours * SECONDS_PER_HOUR;
        require(newTimestamp >= timestamp);
    }
    function addMinutes(uint timestamp, uint _minutes) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp + _minutes * SECONDS_PER_MINUTE;
        require(newTimestamp >= timestamp);
    }
    function addSeconds(uint timestamp, uint _seconds) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp + _seconds;
        require(newTimestamp >= timestamp);
    }

    function subYears(uint timestamp, uint _years) internal pure returns (uint newTimestamp) {
        (uint year, uint month, uint day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        year -= _years;
        uint daysInMonth = _getDaysInMonth(year, month);
        if (day > daysInMonth) {
            day = daysInMonth;
        }
        newTimestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY + timestamp % SECONDS_PER_DAY;
        require(newTimestamp <= timestamp);
    }
    function subMonths(uint timestamp, uint _months) internal pure returns (uint newTimestamp) {
        (uint year, uint month, uint day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        uint yearMonth = year * 12 + (month - 1) - _months;
        year = yearMonth / 12;
        month = yearMonth % 12 + 1;
        uint daysInMonth = _getDaysInMonth(year, month);
        if (day > daysInMonth) {
            day = daysInMonth;
        }
        newTimestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY + timestamp % SECONDS_PER_DAY;
        require(newTimestamp <= timestamp);
    }
    function subDays(uint timestamp, uint _days) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp - _days * SECONDS_PER_DAY;
        require(newTimestamp <= timestamp);
    }
    function subHours(uint timestamp, uint _hours) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp - _hours * SECONDS_PER_HOUR;
        require(newTimestamp <= timestamp);
    }
    function subMinutes(uint timestamp, uint _minutes) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp - _minutes * SECONDS_PER_MINUTE;
        require(newTimestamp <= timestamp);
    }
    function subSeconds(uint timestamp, uint _seconds) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp - _seconds;
        require(newTimestamp <= timestamp);
    }

    function diffYears(uint fromTimestamp, uint toTimestamp) internal pure returns (uint _years) {
        require(fromTimestamp <= toTimestamp);
        (uint fromYear,,) = _daysToDate(fromTimestamp / SECONDS_PER_DAY);
        (uint toYear,,) = _daysToDate(toTimestamp / SECONDS_PER_DAY);
        _years = toYear - fromYear;
    }
    function diffMonths(uint fromTimestamp, uint toTimestamp) internal pure returns (uint _months) {
        require(fromTimestamp <= toTimestamp);
        (uint fromYear, uint fromMonth,) = _daysToDate(fromTimestamp / SECONDS_PER_DAY);
        (uint toYear, uint toMonth,) = _daysToDate(toTimestamp / SECONDS_PER_DAY);
        _months = toYear * 12 + toMonth - fromYear * 12 - fromMonth;
    }
    function diffDays(uint fromTimestamp, uint toTimestamp) internal pure returns (uint _days) {
        require(fromTimestamp <= toTimestamp);
        _days = (toTimestamp - fromTimestamp) / SECONDS_PER_DAY;
    }
    function diffHours(uint fromTimestamp, uint toTimestamp) internal pure returns (uint _hours) {
        require(fromTimestamp <= toTimestamp);
        _hours = (toTimestamp - fromTimestamp) / SECONDS_PER_HOUR;
    }
    function diffMinutes(uint fromTimestamp, uint toTimestamp) internal pure returns (uint _minutes) {
        require(fromTimestamp <= toTimestamp);
        _minutes = (toTimestamp - fromTimestamp) / SECONDS_PER_MINUTE;
    }
    function diffSeconds(uint fromTimestamp, uint toTimestamp) internal pure returns (uint _seconds) {
        require(fromTimestamp <= toTimestamp);
        _seconds = toTimestamp - fromTimestamp;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/ERC1155.sol)

pragma solidity ^0.8.0;

import "./IERC1155.sol";
import "./IERC1155Receiver.sol";
import "./extensions/IERC1155MetadataURI.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of the basic standard multi-token.
 * See https://eips.ethereum.org/EIPS/eip-1155
 * Originally based on code by Enjin: https://github.com/enjin/erc-1155
 *
 * _Available since v3.1._
 */
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
    using Address for address;

    // Mapping from token ID to account balances
    mapping(uint256 => mapping(address => uint256)) private _balances;

    // Mapping from account to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
    string private _uri;

    /**
     * @dev See {_setURI}.
     */
    constructor(string memory uri_) {
        _setURI(uri_);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC1155).interfaceId ||
            interfaceId == type(IERC1155MetadataURI).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\{id\}` substring with the
     * actual token type ID.
     */
    function uri(uint256) public view virtual override returns (string memory) {
        return _uri;
    }

    /**
     * @dev See {IERC1155-balanceOf}.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
        require(account != address(0), "ERC1155: balance query for the zero address");
        return _balances[id][account];
    }

    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
        public
        view
        virtual
        override
        returns (uint256[] memory)
    {
        require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");

        uint256[] memory batchBalances = new uint256[](accounts.length);

        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts[i], ids[i]);
        }

        return batchBalances;
    }

    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[account][operator];
    }

    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not owner nor approved"
        );
        _safeTransferFrom(from, to, id, amount, data);
    }

    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: transfer caller is not owner nor approved"
        );
        _safeBatchTransferFrom(from, to, ids, amounts, data);
    }

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }
        _balances[id][to] += amount;

        emit TransferSingle(operator, from, to, id, amount);

        _doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
            _balances[id][to] += amount;
        }

        emit TransferBatch(operator, from, to, ids, amounts);

        _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
    }

    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\{id\}` substring in either the
     * URI or any of the amounts in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\{id\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        _uri = newuri;
    }

    /**
     * @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, address(0), to, _asSingletonArray(id), _asSingletonArray(amount), data);

        _balances[id][to] += amount;
        emit TransferSingle(operator, address(0), to, id, amount);

        _doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _mintBatch(
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; i++) {
            _balances[ids[i]][to] += amounts[i];
        }

        emit TransferBatch(operator, address(0), to, ids, amounts);

        _doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
    }

    /**
     * @dev Destroys `amount` tokens of token type `id` from `from`
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `amount` tokens of token type `id`.
     */
    function _burn(
        address from,
        uint256 id,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }

        emit TransferSingle(operator, from, address(0), id, amount);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     */
    function _burnBatch(
        address from,
        uint256[] memory ids,
        uint256[] memory amounts
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        for (uint256 i = 0; i < ids.length; i++) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
        }

        emit TransferBatch(operator, from, address(0), ids, amounts);
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits a {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC1155: setting approval status for self");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
                if (response != IERC1155Receiver.onERC1155Received.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non ERC1155Receiver implementer");
            }
        }
    }

    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non ERC1155Receiver implementer");
            }
        }
    }

    function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
        uint256[] memory array = new uint256[](1);
        array[0] = element;

        return array;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/ERC1155Supply.sol)

pragma solidity ^0.8.0;

import "../ERC1155.sol";

/**
 * @dev Extension of ERC1155 that adds tracking of total supply per id.
 *
 * Useful for scenarios where Fungible and Non-fungible tokens have to be
 * clearly identified. Note: While a totalSupply of 1 might mean the
 * corresponding is an NFT, there is no guarantees that no other token with the
 * same id are not going to be minted.
 */
abstract contract ERC1155Supply is ERC1155 {
    mapping(uint256 => uint256) private _totalSupply;

    /**
     * @dev Total amount of tokens in with a given id.
     */
    function totalSupply(uint256 id) public view virtual returns (uint256) {
        return _totalSupply[id];
    }

    /**
     * @dev Indicates whether any token exist with a given id, or not.
     */
    function exists(uint256 id) public view virtual returns (bool) {
        return ERC1155Supply.totalSupply(id) > 0;
    }

    /**
     * @dev See {ERC1155-_beforeTokenTransfer}.
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual override {
        super._beforeTokenTransfer(operator, from, to, ids, amounts, data);

        if (from == address(0)) {
            for (uint256 i = 0; i < ids.length; ++i) {
                _totalSupply[ids[i]] += amounts[i];
            }
        }

        if (to == address(0)) {
            for (uint256 i = 0; i < ids.length; ++i) {
                _totalSupply[ids[i]] -= amounts[i];
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)

pragma solidity ^0.8.0;

import "../IERC1155.sol";

/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155MetadataURI is IERC1155 {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\{id\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
        @dev Handles the receipt of a single ERC1155 token type. This function is
        called at the end of a `safeTransferFrom` after the balance has been updated.
        To accept the transfer, this must return
        `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
        (i.e. 0xf23a6e61, or its own function selector).
        @param operator The address which initiated the transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param id The ID of the token being transferred
        @param value The amount of tokens being transferred
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
    */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
        @dev Handles the receipt of a multiple ERC1155 token types. This function
        is called at the end of a `safeBatchTransferFrom` after the balances have
        been updated. To accept the transfer(s), this must return
        `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
        (i.e. 0xbc197c81, or its own function selector).
        @param operator The address which initiated the batch transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param ids An array containing ids of each token being transferred (order and length must match values array)
        @param values An array containing amounts of each token being transferred (order and length must match ids array)
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
    */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// SPDX-License-Identifier: GPL-3.0

pragma solidity ^0.8.6;

import "@openzeppelin/contracts/token/ERC1155/extensions/ERC1155Supply.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "../libraries/DateTime.sol";
import { Base64 } from "base64-sol/base64.sol";

/// @title Unix Days
/// @author Jake Allen
contract UnixDays is ERC1155Supply, Ownable {
    using Strings for uint256;

    // SVG elements
    string private svgPart1 = '<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 800 800"><rect width="100%" height="100%" fill="#';
    string private svgPart2 = '"/></svg>';

    constructor() ERC1155("") {}
    
    /// @notice return token metadata
    function uri(uint256 tokenId) public view virtual override returns (string memory) {
        require(exists(tokenId), "Nonexistent token");

        string memory name = string(abi.encodePacked('Day ', tokenId.toString()));
        string memory description = '';
        string memory color = getHexColor(tokenId);
        string memory encodedSVG = getEncodedSVG(color);

        string memory base64 = Base64.encode(abi.encodePacked(
            '{"name":"', name, '", "description":"', description, '", "image":"data:image/svg+xml;base64,', encodedSVG, '", "attributes":[{"trait_type":"Color","value":"#', color,'"}]''}'
        ));

        return string(abi.encodePacked('data:application/json;base64,', base64));
    }

    /// @notice mint today's color
    function mint() external {
        uint256 daysSinceEpoch = getDaysSinceEpoch();
        // receiving address, tokenId, quantity, data (none)
        _mint(msg.sender, daysSinceEpoch, 1, "");
    }

    /// @notice number of days since unix epoch in UTC
    function getDaysSinceEpoch() public view returns (uint256) {
        (uint256 year, uint256 month, uint256 day) = BokkyPooBahsDateTimeLibrary
            .timestampToDate(block.timestamp);
        return BokkyPooBahsDateTimeLibrary._daysFromDate(year, month, day);
    }

    /// @notice get base64 encoded svg for a given color
    function getEncodedSVG(string memory color) public view returns (string memory) {
        return Base64.encode(abi.encodePacked(
            svgPart1,
            color,
            svgPart2
        ));
    }

    /// @notice get a hex color for a given day
    function getHexColor(uint256 day) public pure returns (string memory) {
        // get deterministic bytes
        bytes32 hashBytes = keccak256((abi.encodePacked(day)));
        // return string of first 3 bytes
        return string(bytes32ToHexString(hashBytes));
    }

    /// @notice get literal string representation of first 6 bytes of bytes32 string
    function bytes32ToHexString(bytes32 data) public pure returns (string memory) {
        bytes memory temp = new bytes(6);
        uint256 count;

        for (uint256 i = 0; i < 3; i++) {
            bytes1 currentByte = bytes1(data << (i * 8));
            
            uint8 c1 = uint8(
                bytes1((currentByte << 4) >> 4)
            );
            
            uint8 c2 = uint8(
                bytes1((currentByte >> 4))
            );
        
            if (c2 >= 0 && c2 <= 9) temp[count++] = bytes1(c2 + 48);
            else temp[count++] = bytes1(c2 + 87);
            
            if (c1 >= 0 && c1 <= 9) temp[count++] = bytes1(c1 + 48);
            else temp[count++] = bytes1(c1 + 87);
        }

        return string(temp);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0;

/// @title Base64
/// @author Brecht Devos - <brecht@loopring.org>
/// @notice Provides functions for encoding/decoding base64
library Base64 {
    string internal constant TABLE_ENCODE = 'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/';
    bytes  internal constant TABLE_DECODE = hex"0000000000000000000000000000000000000000000000000000000000000000"
                                            hex"00000000000000000000003e0000003f3435363738393a3b3c3d000000000000"
                                            hex"00000102030405060708090a0b0c0d0e0f101112131415161718190000000000"
                                            hex"001a1b1c1d1e1f202122232425262728292a2b2c2d2e2f303132330000000000";

    function encode(bytes memory data) internal pure returns (string memory) {
        if (data.length == 0) return '';

        // load the table into memory
        string memory table = TABLE_ENCODE;

        // multiply by 4/3 rounded up
        uint256 encodedLen = 4 * ((data.length + 2) / 3);

        // add some extra buffer at the end required for the writing
        string memory result = new string(encodedLen + 32);

        assembly {
            // set the actual output length
            mstore(result, encodedLen)

            // prepare the lookup table
            let tablePtr := add(table, 1)

            // input ptr
            let dataPtr := data
            let endPtr := add(dataPtr, mload(data))

            // result ptr, jump over length
            let resultPtr := add(result, 32)

            // run over the input, 3 bytes at a time
            for {} lt(dataPtr, endPtr) {}
            {
                // read 3 bytes
                dataPtr := add(dataPtr, 3)
                let input := mload(dataPtr)

                // write 4 characters
                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))
                resultPtr := add(resultPtr, 1)
                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))
                resultPtr := add(resultPtr, 1)
                mstore8(resultPtr, mload(add(tablePtr, and(shr( 6, input), 0x3F))))
                resultPtr := add(resultPtr, 1)
                mstore8(resultPtr, mload(add(tablePtr, and(        input,  0x3F))))
                resultPtr := add(resultPtr, 1)
            }

            // padding with '='
            switch mod(mload(data), 3)
            case 1 { mstore(sub(resultPtr, 2), shl(240, 0x3d3d)) }
            case 2 { mstore(sub(resultPtr, 1), shl(248, 0x3d)) }
        }

        return result;
    }

    function decode(string memory _data) internal pure returns (bytes memory) {
        bytes memory data = bytes(_data);

        if (data.length == 0) return new bytes(0);
        require(data.length % 4 == 0, "invalid base64 decoder input");

        // load the table into memory
        bytes memory table = TABLE_DECODE;

        // every 4 characters represent 3 bytes
        uint256 decodedLen = (data.length / 4) * 3;

        // add some extra buffer at the end required for the writing
        bytes memory result = new bytes(decodedLen + 32);

        assembly {
            // padding with '='
            let lastBytes := mload(add(data, mload(data)))
            if eq(and(lastBytes, 0xFF), 0x3d) {
                decodedLen := sub(decodedLen, 1)
                if eq(and(lastBytes, 0xFFFF), 0x3d3d) {
                    decodedLen := sub(decodedLen, 1)
                }
            }

            // set the actual output length
            mstore(result, decodedLen)

            // prepare the lookup table
            let tablePtr := add(table, 1)

            // input ptr
            let dataPtr := data
            let endPtr := add(dataPtr, mload(data))

            // result ptr, jump over length
            let resultPtr := add(result, 32)

            // run over the input, 4 characters at a time
            for {} lt(dataPtr, endPtr) {}
            {
               // read 4 characters
               dataPtr := add(dataPtr, 4)
               let input := mload(dataPtr)

               // write 3 bytes
               let output := add(
                   add(
                       shl(18, and(mload(add(tablePtr, and(shr(24, input), 0xFF))), 0xFF)),
                       shl(12, and(mload(add(tablePtr, and(shr(16, input), 0xFF))), 0xFF))),
                   add(
                       shl( 6, and(mload(add(tablePtr, and(shr( 8, input), 0xFF))), 0xFF)),
                               and(mload(add(tablePtr, and(        input , 0xFF))), 0xFF)
                    )
                )
                mstore(resultPtr, shl(232, output))
                resultPtr := add(resultPtr, 3)
            }
        }

        return result;
    }
}

{
  "compilationTarget": {
    "contracts/UnixDays.sol": "UnixDays"
  },
  "evmVersion": "berlin",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "remappings": []
}