// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        } else if (error == RecoverError.InvalidSignatureV) {
            revert("ECDSA: invalid signature 'v' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        // Check the signature length
        // - case 65: r,s,v signature (standard)
        // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else if (signature.length == 64) {
            bytes32 r;
            bytes32 vs;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {
                r := mload(add(signature, 0x20))
                vs := mload(add(signature, 0x40))
            }
            return tryRecover(hash, r, vs);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s;
        uint8 v;
        assembly {
            s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
            v := add(shr(255, vs), 27)
        }
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }
        if (v != 27 && v != 28) {
            return (address(0), RecoverError.InvalidSignatureV);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);

        uint256 currentAllowance = _allowances[sender][_msgSender()];
        require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
        unchecked {
            _approve(sender, _msgSender(), currentAllowance - amount);
        }

        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        uint256 currentAllowance = _allowances[_msgSender()][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(_msgSender(), spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `sender` to `recipient`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        uint256 senderBalance = _balances[sender];
        require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[sender] = senderBalance - amount;
        }
        _balances[recipient] += amount;

        emit Transfer(sender, recipient, amount);

        _afterTokenTransfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
 *
 * Assumes serials are sequentially minted starting at 0 (e.g. 0, 1, 2, 3..).
 *
 * Assumes the number of issuable tokens (collection size) is capped and fits in a uint128.
 *
 * Does not support burning tokens to address(0).
 */
contract ERC721A is
  Context,
  ERC165,
  IERC721,
  IERC721Metadata,
  IERC721Enumerable
{
  using Address for address;
  using Strings for uint256;

  struct TokenOwnership {
    address addr;
    uint64 startTimestamp;
  }

  struct AddressData {
    uint128 balance;
    uint128 numberMinted;
  }

  uint256 private currentIndex = 0;

  uint256 internal immutable collectionSize;
  uint256 internal immutable maxBatchSize;

  // Token name
  string private _name;

  // Token symbol
  string private _symbol;

  // Mapping from token ID to ownership details
  // An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
  mapping(uint256 => TokenOwnership) private _ownerships;

  // Mapping owner address to address data
  mapping(address => AddressData) private _addressData;

  // Mapping from token ID to approved address
  mapping(uint256 => address) private _tokenApprovals;

  // Mapping from owner to operator approvals
  mapping(address => mapping(address => bool)) private _operatorApprovals;

  /**
   * @dev
   * `maxBatchSize` refers to how much a minter can mint at a time.
   * `collectionSize_` refers to how many tokens are in the collection.
   */
  constructor(
    string memory name_,
    string memory symbol_,
    uint256 maxBatchSize_,
    uint256 collectionSize_
  ) {
    require(
      collectionSize_ > 0,
      "ERC721A: collection must have a nonzero supply"
    );
    require(maxBatchSize_ > 0, "ERC721A: max batch size must be nonzero");
    _name = name_;
    _symbol = symbol_;
    maxBatchSize = maxBatchSize_;
    collectionSize = collectionSize_;
  }

  /**
   * @dev See {IERC721Enumerable-totalSupply}.
   */
  function totalSupply() public view override returns (uint256) {
    return currentIndex;
  }

  /**
   * @dev See {IERC721Enumerable-tokenByIndex}.
   */
  function tokenByIndex(uint256 index) public view override returns (uint256) {
    require(index < totalSupply(), "ERC721A: global index out of bounds");
    return index;
  }

  /**
   * @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
   * This read function is O(collectionSize). If calling from a separate contract, be sure to test gas first.
   * It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
   */
  function tokenOfOwnerByIndex(address owner, uint256 index)
    public
    view
    override
    returns (uint256)
  {
    require(index < balanceOf(owner), "ERC721A: owner index out of bounds");
    uint256 numMintedSoFar = totalSupply();
    uint256 tokenIdsIdx = 0;
    address currOwnershipAddr = address(0);
    for (uint256 i = 0; i < numMintedSoFar; i++) {
      TokenOwnership memory ownership = _ownerships[i];
      if (ownership.addr != address(0)) {
        currOwnershipAddr = ownership.addr;
      }
      if (currOwnershipAddr == owner) {
        if (tokenIdsIdx == index) {
          return i;
        }
        tokenIdsIdx++;
      }
    }
    revert("ERC721A: unable to get token of owner by index");
  }

  /**
   * @dev See {IERC165-supportsInterface}.
   */
  function supportsInterface(bytes4 interfaceId)
    public
    view
    virtual
    override(ERC165, IERC165)
    returns (bool)
  {
    return
      interfaceId == type(IERC721).interfaceId ||
      interfaceId == type(IERC721Metadata).interfaceId ||
      interfaceId == type(IERC721Enumerable).interfaceId ||
      super.supportsInterface(interfaceId);
  }

  /**
   * @dev See {IERC721-balanceOf}.
   */
  function balanceOf(address owner) public view override returns (uint256) {
    require(owner != address(0), "ERC721A: balance query for the zero address");
    return uint256(_addressData[owner].balance);
  }

  function _numberMinted(address owner) internal view returns (uint256) {
    require(
      owner != address(0),
      "ERC721A: number minted query for the zero address"
    );
    return uint256(_addressData[owner].numberMinted);
  }

  function ownershipOf(uint256 tokenId)
    internal
    view
    returns (TokenOwnership memory)
  {
    require(_exists(tokenId), "ERC721A: owner query for nonexistent token");

    uint256 lowestTokenToCheck;
    if (tokenId >= maxBatchSize) {
      lowestTokenToCheck = tokenId - maxBatchSize + 1;
    }

    for (uint256 curr = tokenId; curr >= lowestTokenToCheck; curr--) {
      TokenOwnership memory ownership = _ownerships[curr];
      if (ownership.addr != address(0)) {
        return ownership;
      }
    }

    revert("ERC721A: unable to determine the owner of token");
  }

  /**
   * @dev See {IERC721-ownerOf}.
   */
  function ownerOf(uint256 tokenId) public view override returns (address) {
    return ownershipOf(tokenId).addr;
  }

  /**
   * @dev See {IERC721Metadata-name}.
   */
  function name() public view virtual override returns (string memory) {
    return _name;
  }

  /**
   * @dev See {IERC721Metadata-symbol}.
   */
  function symbol() public view virtual override returns (string memory) {
    return _symbol;
  }

  /**
   * @dev See {IERC721Metadata-tokenURI}.
   */
  function tokenURI(uint256 tokenId)
    public
    view
    virtual
    override
    returns (string memory)
  {
    require(
      _exists(tokenId),
      "ERC721Metadata: URI query for nonexistent token"
    );

    string memory baseURI = _baseURI();
    return
      bytes(baseURI).length > 0
        ? string(abi.encodePacked(baseURI, tokenId.toString()))
        : "";
  }

  /**
   * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
   * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
   * by default, can be overriden in child contracts.
   */
  function _baseURI() internal view virtual returns (string memory) {
    return "";
  }

  /**
   * @dev See {IERC721-approve}.
   */
  function approve(address to, uint256 tokenId) public override {
    address owner = ERC721A.ownerOf(tokenId);
    require(to != owner, "ERC721A: approval to current owner");

    require(
      _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
      "ERC721A: approve caller is not owner nor approved for all"
    );

    _approve(to, tokenId, owner);
  }

  /**
   * @dev See {IERC721-getApproved}.
   */
  function getApproved(uint256 tokenId) public view override returns (address) {
    require(_exists(tokenId), "ERC721A: approved query for nonexistent token");

    return _tokenApprovals[tokenId];
  }

  /**
   * @dev See {IERC721-setApprovalForAll}.
   */
  function setApprovalForAll(address operator, bool approved) public override {
    require(operator != _msgSender(), "ERC721A: approve to caller");

    _operatorApprovals[_msgSender()][operator] = approved;
    emit ApprovalForAll(_msgSender(), operator, approved);
  }

  /**
   * @dev See {IERC721-isApprovedForAll}.
   */
  function isApprovedForAll(address owner, address operator)
    public
    view
    virtual
    override
    returns (bool)
  {
    return _operatorApprovals[owner][operator];
  }

  /**
   * @dev See {IERC721-transferFrom}.
   */
  function transferFrom(
    address from,
    address to,
    uint256 tokenId
  ) public override {
    _transfer(from, to, tokenId);
  }

  /**
   * @dev See {IERC721-safeTransferFrom}.
   */
  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId
  ) public override {
    safeTransferFrom(from, to, tokenId, "");
  }

  /**
   * @dev See {IERC721-safeTransferFrom}.
   */
  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId,
    bytes memory _data
  ) public override {
    _transfer(from, to, tokenId);
    require(
      _checkOnERC721Received(from, to, tokenId, _data),
      "ERC721A: transfer to non ERC721Receiver implementer"
    );
  }

  /**
   * @dev Returns whether `tokenId` exists.
   *
   * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
   *
   * Tokens start existing when they are minted (`_mint`),
   */
  function _exists(uint256 tokenId) internal view returns (bool) {
    return tokenId < currentIndex;
  }

  function _safeMint(address to, uint256 quantity) internal {
    _safeMint(to, quantity, "");
  }

  /**
   * @dev Mints `quantity` tokens and transfers them to `to`.
   *
   * Requirements:
   *
   * - there must be `quantity` tokens remaining unminted in the total collection.
   * - `to` cannot be the zero address.
   * - `quantity` cannot be larger than the max batch size.
   *
   * Emits a {Transfer} event.
   */
  function _safeMint(
    address to,
    uint256 quantity,
    bytes memory _data
  ) internal {
    uint256 startTokenId = currentIndex;
    require(to != address(0), "ERC721A: mint to the zero address");
    // We know if the first token in the batch doesn't exist, the other ones don't as well, because of serial ordering.
    require(!_exists(startTokenId), "ERC721A: token already minted");
    require(quantity <= maxBatchSize, "ERC721A: quantity to mint too high");

    _beforeTokenTransfers(address(0), to, startTokenId, quantity);

    AddressData memory addressData = _addressData[to];
    _addressData[to] = AddressData(
      addressData.balance + uint128(quantity),
      addressData.numberMinted + uint128(quantity)
    );
    _ownerships[startTokenId] = TokenOwnership(to, uint64(block.timestamp));

    uint256 updatedIndex = startTokenId;

    for (uint256 i = 0; i < quantity; i++) {
      emit Transfer(address(0), to, updatedIndex);
      require(
        _checkOnERC721Received(address(0), to, updatedIndex, _data),
        "ERC721A: transfer to non ERC721Receiver implementer"
      );
      updatedIndex++;
    }

    currentIndex = updatedIndex;
    _afterTokenTransfers(address(0), to, startTokenId, quantity);
  }

  /**
   * @dev Transfers `tokenId` from `from` to `to`.
   *
   * Requirements:
   *
   * - `to` cannot be the zero address.
   * - `tokenId` token must be owned by `from`.
   *
   * Emits a {Transfer} event.
   */
  function _transfer(
    address from,
    address to,
    uint256 tokenId
  ) private {
    TokenOwnership memory prevOwnership = ownershipOf(tokenId);

    bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
      getApproved(tokenId) == _msgSender() ||
      isApprovedForAll(prevOwnership.addr, _msgSender()));

    require(
      isApprovedOrOwner,
      "ERC721A: transfer caller is not owner nor approved"
    );

    require(
      prevOwnership.addr == from,
      "ERC721A: transfer from incorrect owner"
    );
    require(to != address(0), "ERC721A: transfer to the zero address");

    _beforeTokenTransfers(from, to, tokenId, 1);

    // Clear approvals from the previous owner
    _approve(address(0), tokenId, prevOwnership.addr);

    _addressData[from].balance -= 1;
    _addressData[to].balance += 1;
    _ownerships[tokenId] = TokenOwnership(to, uint64(block.timestamp));

    // If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
    // Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
    uint256 nextTokenId = tokenId + 1;
    if (_ownerships[nextTokenId].addr == address(0)) {
      if (_exists(nextTokenId)) {
        _ownerships[nextTokenId] = TokenOwnership(
          prevOwnership.addr,
          prevOwnership.startTimestamp
        );
      }
    }

    emit Transfer(from, to, tokenId);
    _afterTokenTransfers(from, to, tokenId, 1);
  }

  /**
   * @dev Approve `to` to operate on `tokenId`
   *
   * Emits a {Approval} event.
   */
  function _approve(
    address to,
    uint256 tokenId,
    address owner
  ) private {
    _tokenApprovals[tokenId] = to;
    emit Approval(owner, to, tokenId);
  }

  uint256 public nextOwnerToExplicitlySet = 0;

  /**
   * @dev Explicitly set `owners` to eliminate loops in future calls of ownerOf().
   */
  function _setOwnersExplicit(uint256 quantity) internal {
    uint256 oldNextOwnerToSet = nextOwnerToExplicitlySet;
    require(quantity > 0, "quantity must be nonzero");
    uint256 endIndex = oldNextOwnerToSet + quantity - 1;
    if (endIndex > collectionSize - 1) {
      endIndex = collectionSize - 1;
    }
    // We know if the last one in the group exists, all in the group exist, due to serial ordering.
    require(_exists(endIndex), "not enough minted yet for this cleanup");
    for (uint256 i = oldNextOwnerToSet; i <= endIndex; i++) {
      if (_ownerships[i].addr == address(0)) {
        TokenOwnership memory ownership = ownershipOf(i);
        _ownerships[i] = TokenOwnership(
          ownership.addr,
          ownership.startTimestamp
        );
      }
    }
    nextOwnerToExplicitlySet = endIndex + 1;
  }

  /**
   * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
   * The call is not executed if the target address is not a contract.
   *
   * @param from address representing the previous owner of the given token ID
   * @param to target address that will receive the tokens
   * @param tokenId uint256 ID of the token to be transferred
   * @param _data bytes optional data to send along with the call
   * @return bool whether the call correctly returned the expected magic value
   */
  function _checkOnERC721Received(
    address from,
    address to,
    uint256 tokenId,
    bytes memory _data
  ) private returns (bool) {
    if (to.isContract()) {
      try
        IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data)
      returns (bytes4 retval) {
        return retval == IERC721Receiver(to).onERC721Received.selector;
      } catch (bytes memory reason) {
        if (reason.length == 0) {
          revert("ERC721A: transfer to non ERC721Receiver implementer");
        } else {
          assembly {
            revert(add(32, reason), mload(reason))
          }
        }
      }
    } else {
      return true;
    }
  }

  /**
   * @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
   *
   * startTokenId - the first token id to be transferred
   * quantity - the amount to be transferred
   *
   * Calling conditions:
   *
   * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
   * transferred to `to`.
   * - When `from` is zero, `tokenId` will be minted for `to`.
   */
  function _beforeTokenTransfers(
    address from,
    address to,
    uint256 startTokenId,
    uint256 quantity
  ) internal virtual {}

  /**
   * @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
   * minting.
   *
   * startTokenId - the first token id to be transferred
   * quantity - the amount to be transferred
   *
   * Calling conditions:
   *
   * - when `from` and `to` are both non-zero.
   * - `from` and `to` are never both zero.
   */
  function _afterTokenTransfers(
    address from,
    address to,
    uint256 startTokenId,
    uint256 quantity
  ) internal virtual {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";

contract FrenshipToken is ERC20 {
    address private admin;
    mapping(address=>bool) private minters;
    uint256 maxSupply = 300000000;

    constructor () ERC20 ("FrenshipToken", "FST") {
       admin = msg.sender;
    }

    function setMaxSupply(uint256 newMaxSupply) public adminOnly{
        maxSupply = newMaxSupply;
    }

    function setMinter(address _minter) public adminOnly {
        minters[_minter] = true;
    }

    function devMint(address to, uint256 amount) public adminOnly {
        uint256 totalSupply = totalSupply();

        require(totalSupply + amount <= maxSupply, "reached max supply");

        _mint(to, amount);
    }

    function mint(address to, uint256 amount) public {
        require(minters[msg.sender], "minter only");
        
        uint256 totalSupply = totalSupply();

        require(totalSupply + amount <= maxSupply, "reached max supply");

        _mint(to, amount);
    }

    function burn(uint amount) external {
        _burn(msg.sender, amount);
    }
    
    function decimals() public view virtual override returns (uint8) {
        return 0;
    }

     modifier adminOnly() {
        require(admin == msg.sender, "not admin");
        _;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Enumerable.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Enumerable is IERC721 {
    /**
     * @dev Returns the total amount of tokens stored by the contract.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
     * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);

    /**
     * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
     * Use along with {totalSupply} to enumerate all tokens.
     */
    function tokenByIndex(uint256 index) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "./ERC721A.sol";
import "./FrenshipToken.sol";

contract ZooFrenzToken is ERC721A, Ownable, ReentrancyGuard {
    using Strings for uint256;
    using SafeMath for uint256;
    using ECDSA for bytes32;

    FrenshipToken FSToken;

    string public baseURI;
    string public unrevealURI;
    uint256 public price = 0.15 ether;
    uint256 public presaleEndDate;
    uint256 public claimStartTime;
    uint256 public claimCooldown = 1 days;
    uint256 public frenz3dNumber = 1;
    uint16 public claim3dModelCost = 400;
    bool public enableClaim;

    address private signer;

    mapping(uint256=>uint256) public randomResults;
    mapping(uint256=>uint8) public frenzRarities;
    mapping(uint256=>bool) public claimedFrenz3d;
    mapping(uint256=>uint256) public numberOf3dFrenz;
    mapping(uint8=>uint8) public FSTClaimNumber;
    mapping(uint256=>uint256) public tokenClaimedTime;
    mapping(address=>uint64) public whitelistMinted;
    mapping(address=>uint8) public allowlist;
    mapping(string => bool) private ticketUsed;

    constructor(address initSigner, address initFSTAddress, uint256 maxAmountPerMint, uint256 maxCollection) ERC721A("ZooFrenzToken", "ZFT", maxAmountPerMint, maxCollection) {

        signer = initSigner;
        
        FSToken = FrenshipToken(initFSTAddress);

        initFSTClaimNumber();
    }

    function initFSTClaimNumber () private {
        FSTClaimNumber[1] = 8;
        FSTClaimNumber[2] = 9;
        FSTClaimNumber[3] = 10;
        FSTClaimNumber[4] = 11;
        FSTClaimNumber[5] = 12;
    }

    function setPresaleEndDate(uint256 newDate) public onlyOwner {
        presaleEndDate = newDate;
    }

    function setEnableClaim(bool enable) public onlyOwner {
        enableClaim = enable;
        claimStartTime = block.timestamp;
    }

    function setClaimNumbers(uint8[] calldata rarities, uint8[] calldata amounts) public onlyOwner {
        require(rarities.length == amounts.length, "rarities does not match amounts length");
        
        for (uint256 i = 0; i < rarities.length; i++) {
            FSTClaimNumber[rarities[i]] = amounts[i];
        }
    }

    function setClaimCooldown(uint256 cooldown) public onlyOwner{
        claimCooldown = cooldown;
    }

    function setPrice(uint256 newPrice) public onlyOwner {
        price = newPrice;
    }

    function setClaim3dModelCost(uint16 newCost) public onlyOwner {
        claim3dModelCost = newCost;
    }

    function setRarities(uint256[] calldata tokenIds, uint8[] calldata ratities) external onlyOwner {
        require(tokenIds.length == ratities.length, "tokenIds does not match ratities length");
        
        for(uint256 i = 0; i < tokenIds.length; i++) {
            frenzRarities[tokenIds[i]] = ratities[i];
        }
    }

    function setSigner(address newSigner) external onlyOwner {
        signer = newSigner;
    }

    function setAllowlist(address[] calldata addresses, uint8[] calldata mintAmount) external onlyOwner
    {
        require(addresses.length == mintAmount.length, "addresses does not match numSlots length");
        
        for (uint256 i = 0; i < addresses.length; i++) {
            allowlist[addresses[i]] = mintAmount[i];
        }
    }

    function withdraw() external payable onlyOwner {
        (bool success, ) = payable(msg.sender).call{value: address(this).balance}("");
        require(success);
	}

    function recycleToken(address to, uint256 amount) external onlyOwner {
        FSToken.transfer(to, amount);
	}

    function isWhitelistAuthorized(
        address sender, 
        string memory ticket,
        uint8 allowAmount,
        uint64 exipreTime,
        bytes memory signature
    ) private view returns (bool) {
        bytes32 hashMsg = keccak256(abi.encodePacked(sender, ticket, allowAmount, exipreTime));
        bytes32 ethHashMessage = hashMsg.toEthSignedMessageHash();

        return ethHashMessage.recover(signature) == signer;
    }

    function isAuthorized(
        address sender, 
        string memory ticket,
        uint64 exipreTime,
        bytes memory signature
    ) private view returns (bool) {
        bytes32 hashMsg = keccak256(abi.encodePacked(sender, ticket, exipreTime));
        bytes32 ethHashMessage = hashMsg.toEthSignedMessageHash();

        return ethHashMessage.recover(signature) == signer;
    }

    function mint(uint8 amount, uint8 allowAmount, string calldata ticket, uint64 exipreTime, bytes calldata signature) external payable callerIsUser nonReentrant {
        
        require(amount > 0, "You can get no fewer than 1");

        require(amount <= maxBatchSize, "too much");
        
        uint256 supply = totalSupply();

        require(supply + amount <= collectionSize, "reached max supply");

        require(!ticketUsed[ticket], "ticket used");

        require(block.timestamp <= exipreTime, "ticket expired");
        
        if(block.timestamp <= presaleEndDate) {
            require(whitelistMinted[msg.sender] + amount <= allowAmount, "exceed mint number");
            require(isWhitelistAuthorized(msg.sender, ticket, allowAmount, exipreTime, signature), "auth failed");
            whitelistMinted[msg.sender] += amount;
        } else {
            require(isAuthorized(msg.sender, ticket, exipreTime, signature), "auth failed");
        }

        uint256 finalPrice = price.mul(amount);

        require(msg.value >= finalPrice, "not enough!");
        
        ticketUsed[ticket] = true;

        mintFrenz(amount, supply, ticket, msg.sender);
    }

    function devMint(uint256 amount, string calldata ticket, address to) external nonReentrant onlyOwner{
        uint256 supply = totalSupply();
        
        require(supply + amount <= collectionSize, "reached max supply");

        mintFrenz(amount, supply, ticket, to);
    }

    function allowlistMint(uint8 amount, string calldata ticket, uint64 exipreTime, bytes calldata signature) external nonReentrant callerIsUser {
        
        require(allowlist[msg.sender] >= amount, "not eligible for allowlist mint");

        require(totalSupply() + amount <= collectionSize, "reached max supply");

        require(isAuthorized(msg.sender, ticket, exipreTime, signature), "auth failed");

        require(block.timestamp <= exipreTime, "ticket expired");

        allowlist[msg.sender] -= amount;
        
        uint256 supply = totalSupply();

        mintFrenz(amount, supply, ticket, msg.sender);
    }

    function mintFrenz(uint256 _amount, uint256 lastTokenId, string calldata seed, address to) private {
        
        _safeMint(to, _amount);

        uint256 total = lastTokenId + _amount;

        for(; lastTokenId < total; lastTokenId++) {
            
            uint256 tokenId = lastTokenId;
            
            randomResults[tokenId] = uint256(keccak256(abi.encodePacked(seed, tokenId, blockhash(block.number - 1), block.timestamp))) % 10000000000000;
        }
    }

    function getRandomResult(uint256 tokenId) external view returns(uint256) {
        return randomResults[tokenId];
    }

    function claim(uint256 tokenId) external callerIsUser nonReentrant {

        require(enableClaim, "not started yet");

        uint256 claimAmount = getRewardCountOfOwner(tokenId);

        FSToken.mint(msg.sender, claimAmount);

        tokenClaimedTime[tokenId] = block.timestamp;
    }

    function getRewardCountOfOwner(uint256 tokenId) public view returns (uint256) {

        require(ownerOf(tokenId) == msg.sender, "not token owner");

        require (frenzRarities[tokenId] > 0, "not revealed");

        uint256 claimedTime = tokenClaimedTime[tokenId];
    
        if (claimedTime == 0) 
            claimedTime = claimStartTime;

        uint256 count = uint256((block.timestamp - claimedTime) / claimCooldown);
        
        require (count > 0, "no reward yet");

        return count * FSTClaimNumber[frenzRarities[tokenId]];
    }

    function getTokenClaimTime(uint256 tokenId) private view returns (uint256) {
        
        require(ownerOf(tokenId) == msg.sender, "not owner");

        return tokenClaimedTime[tokenId];
    }

    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
	    require(_exists(tokenId), "ERC721Metadata: Nonexistent token");

        if(frenzRarities[tokenId] == 0) {
            return unrevealURI;
        }

        string memory currentBaseURI = _baseURI();
        return bytes(currentBaseURI).length > 0	? string(abi.encodePacked(currentBaseURI, tokenId.toString(), ".json")) : "";
	}

    function setBaseURI(string calldata newURI) external onlyOwner {
        baseURI = newURI;
    }

    function setUnrevealURI(string calldata newURI) external onlyOwner {
        unrevealURI = newURI;
    }

    function _baseURI() internal view virtual override returns (string memory) {
        return baseURI;
    }
    
    function claim3DFrenz(uint256 tokenId) external callerIsUser nonReentrant {
        require(!claimedFrenz3d[tokenId], "3d model claimed");

        require(ownerOf(tokenId) == msg.sender, "not owner");

        require(FSToken.balanceOf(msg.sender) >= claim3dModelCost, "not enough");

        FSToken.transferFrom(msg.sender, address(this), claim3dModelCost);
        
        claimedFrenz3d[tokenId] = true;

        numberOf3dFrenz[tokenId] = frenz3dNumber;

        frenz3dNumber++;
    }
    
    modifier callerIsUser() {
        require(tx.origin == msg.sender, "The caller is another contract");
        _;
    }
}

{
  "compilationTarget": {
    "contracts/ZooFrenzToken.sol": "ZooFrenzToken"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}