// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/abstractcontractContext{
function_msgSender() internalviewvirtualreturns (address) {
returnmsg.sender;
}
function_msgData() internalviewvirtualreturns (bytescalldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691returnmsg.data;
}
}
Contract Source Code
File 4 of 8: ECDSA.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/libraryECDSA{
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/functionrecover(bytes32 hash, bytesmemory signature) internalpurereturns (address) {
// Divide the signature in r, s and v variablesbytes32 r;
bytes32 s;
uint8 v;
// Check the signature length// - case 65: r,s,v signature (standard)// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._if (signature.length==65) {
// ecrecover takes the signature parameters, and the only way to get them// currently is to use assembly.// solhint-disable-next-line no-inline-assemblyassembly {
r :=mload(add(signature, 0x20))
s :=mload(add(signature, 0x40))
v :=byte(0, mload(add(signature, 0x60)))
}
} elseif (signature.length==64) {
// ecrecover takes the signature parameters, and the only way to get them// currently is to use assembly.// solhint-disable-next-line no-inline-assemblyassembly {
let vs :=mload(add(signature, 0x40))
r :=mload(add(signature, 0x20))
s :=and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
v :=add(shr(255, vs), 27)
}
} else {
revert("ECDSA: invalid signature length");
}
return recover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/functionrecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internalpurereturns (address) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines// the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most// signatures from current libraries generate a unique signature with an s-value in the lower half order.//// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept// these malleable signatures as well.require(uint256(s) <=0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0, "ECDSA: invalid signature 's' value");
require(v ==27|| v ==28, "ECDSA: invalid signature 'v' value");
// If the signature is valid (and not malleable), return the signer addressaddress signer =ecrecover(hash, v, r, s);
require(signer !=address(0), "ECDSA: invalid signature");
return signer;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/functiontoEthSignedMessageHash(bytes32 hash) internalpurereturns (bytes32) {
// 32 is the length in bytes of hash,// enforced by the type signature abovereturnkeccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/functiontoTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internalpurereturns (bytes32) {
returnkeccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
Contract Source Code
File 5 of 8: EnumerableSet.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/libraryEnumerableSet{
// To implement this library for multiple types with as little code// repetition as possible, we write it in terms of a generic Set type with// bytes32 values.// The Set implementation uses private functions, and user-facing// implementations (such as AddressSet) are just wrappers around the// underlying Set.// This means that we can only create new EnumerableSets for types that fit// in bytes32.structSet {
// Storage of set valuesbytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0// means a value is not in the set.mapping (bytes32=>uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/function_add(Set storage set, bytes32 value) privatereturns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
returntrue;
} else {
returnfalse;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/function_remove(Set storage set, bytes32 value) privatereturns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slotuint256 valueIndex = set._indexes[value];
if (valueIndex !=0) { // Equivalent to contains(set, value)// To delete an element from the _values array in O(1), we swap the element to delete with the last one in// the array, and then remove the last element (sometimes called as 'swap and pop').// This modifies the order of the array, as noted in {at}.uint256 toDeleteIndex = valueIndex -1;
uint256 lastIndex = set._values.length-1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slotdelete set._indexes[value];
returntrue;
} else {
returnfalse;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/function_contains(Set storage set, bytes32 value) privateviewreturns (bool) {
return set._indexes[value] !=0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/function_length(Set storage set) privateviewreturns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/function_at(Set storage set, uint256 index) privateviewreturns (bytes32) {
require(set._values.length> index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// Bytes32SetstructBytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/functionadd(Bytes32Set storage set, bytes32 value) internalreturns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/functionremove(Bytes32Set storage set, bytes32 value) internalreturns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/functioncontains(Bytes32Set storage set, bytes32 value) internalviewreturns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/functionlength(Bytes32Set storage set) internalviewreturns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/functionat(Bytes32Set storage set, uint256 index) internalviewreturns (bytes32) {
return _at(set._inner, index);
}
// AddressSetstructAddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/functionadd(AddressSet storage set, address value) internalreturns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/functionremove(AddressSet storage set, address value) internalreturns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/functioncontains(AddressSet storage set, address value) internalviewreturns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/functionlength(AddressSet storage set) internalviewreturns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/functionat(AddressSet storage set, uint256 index) internalviewreturns (address) {
returnaddress(uint160(uint256(_at(set._inner, index))));
}
// UintSetstructUintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/functionadd(UintSet storage set, uint256 value) internalreturns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/functionremove(UintSet storage set, uint256 value) internalreturns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/functioncontains(UintSet storage set, uint256 value) internalviewreturns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/functionlength(UintSet storage set) internalviewreturns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/functionat(UintSet storage set, uint256 index) internalviewreturns (uint256) {
returnuint256(_at(set._inner, index));
}
}
Contract Source Code
File 6 of 8: Ownable.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/abstractcontractOwnableisContext{
addressprivate _owner;
eventOwnershipTransferred(addressindexed previousOwner, addressindexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/functionowner() publicviewvirtualreturns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/modifieronlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/functionrenounceOwnership() publicvirtualonlyOwner{
emit OwnershipTransferred(_owner, address(0));
_owner =address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/functiontransferOwnership(address newOwner) publicvirtualonlyOwner{
require(newOwner !=address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
Contract Source Code
File 7 of 8: Pausable.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"../utils/Context.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/abstractcontractPausableisContext{
/**
* @dev Emitted when the pause is triggered by `account`.
*/eventPaused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/eventUnpaused(address account);
boolprivate _paused;
/**
* @dev Initializes the contract in unpaused state.
*/constructor () {
_paused =false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/functionpaused() publicviewvirtualreturns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/modifierwhenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/modifierwhenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/function_pause() internalvirtualwhenNotPaused{
_paused =true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/function_unpause() internalvirtualwhenPaused{
_paused =false;
emit Unpaused(_msgSender());
}
}