// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.8.0;

import { iL1ChugSplashDeployer } from "./interfaces/iL1ChugSplashDeployer.sol";

/**
 * @title L1ChugSplashProxy
 * @dev Basic ChugSplash proxy contract for L1. Very close to being a normal proxy but has added
 * functions `setCode` and `setStorage` for changing the code or storage of the contract. Nifty!
 *
 * Note for future developers: do NOT make anything in this contract 'public' unless you know what
 * you're doing. Anything public can potentially have a function signature that conflicts with a
 * signature attached to the implementation contract. Public functions SHOULD always have the
 * 'proxyCallIfNotOwner' modifier unless there's some *really* good reason not to have that
 * modifier. And there almost certainly is not a good reason to not have that modifier. Beware!
 */
contract L1ChugSplashProxy {

    /*************
     * Constants *
     *************/

    // "Magic" prefix. When prepended to some arbitrary bytecode and used to create a contract, the
    // appended bytecode will be deployed as given.
    bytes13 constant internal DEPLOY_CODE_PREFIX = 0x600D380380600D6000396000f3;

    // bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)
    bytes32 constant internal IMPLEMENTATION_KEY = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    // bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1)
    bytes32 constant internal OWNER_KEY = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;


    /***************
     * Constructor *
     ***************/
    
    /**
     * @param _owner Address of the initial contract owner.
     */
    constructor(
        address _owner
    ) {
        _setOwner(_owner);
    }


    /**********************
     * Function Modifiers *
     **********************/

    /**
     * Blocks a function from being called when the parent signals that the system should be paused
     * via an isUpgrading function.
     */
    modifier onlyWhenNotPaused() {
        address owner = _getOwner();

        // We do a low-level call because there's no guarantee that the owner actually *is* an
        // L1ChugSplashDeployer contract and Solidity will throw errors if we do a normal call and
        // it turns out that it isn't the right type of contract.
        (bool success, bytes memory returndata) = owner.staticcall(
            abi.encodeWithSelector(
                iL1ChugSplashDeployer.isUpgrading.selector
            )
        );

        // If the call was unsuccessful then we assume that there's no "isUpgrading" method and we
        // can just continue as normal. We also expect that the return value is exactly 32 bytes
        // long. If this isn't the case then we can safely ignore the result.
        if (success && returndata.length == 32) {
            // Although the expected value is a *boolean*, it's safer to decode as a uint256 in the
            // case that the isUpgrading function returned something other than 0 or 1. But we only
            // really care about the case where this value is 0 (= false).
            uint256 ret = abi.decode(returndata, (uint256));
            require(
                ret == 0,
                "L1ChugSplashProxy: system is currently being upgraded"
            );
        }

        _;
    }

    /**
     * Makes a proxy call instead of triggering the given function when the caller is either the
     * owner or the zero address. Caller can only ever be the zero address if this function is
     * being called off-chain via eth_call, which is totally fine and can be convenient for
     * client-side tooling. Avoids situations where the proxy and implementation share a sighash
     * and the proxy function ends up being called instead of the implementation one.
     *
     * Note: msg.sender == address(0) can ONLY be triggered off-chain via eth_call. If there's a
     * way for someone to send a transaction with msg.sender == address(0) in any real context then
     * we have much bigger problems. Primary reason to include this additional allowed sender is
     * because the owner address can be changed dynamically and we do not want clients to have to
     * keep track of the current owner in order to make an eth_call that doesn't trigger the
     * proxied contract.
     */
    modifier proxyCallIfNotOwner() {
        if (msg.sender == _getOwner() || msg.sender == address(0)) {
            _;
        } else {
            // This WILL halt the call frame on completion.
            _doProxyCall();
        }
    }


    /*********************
     * Fallback Function *
     *********************/

    fallback()
        external
        payable
    {
        // Proxy call by default.
        _doProxyCall();
    }


    /********************
     * Public Functions *
     ********************/

    /**
     * Sets the code that should be running behind this proxy. Note that this scheme is a bit
     * different from the standard proxy scheme where one would typically deploy the code
     * separately and then set the implementation address. We're doing it this way because it gives
     * us a lot more freedom on the client side. Can only be triggered by the contract owner.
     * @param _code New contract code to run inside this contract.
     */
    function setCode(
        bytes memory _code
    )
        proxyCallIfNotOwner
        public
    {
        // Get the code hash of the current implementation.
        address implementation = _getImplementation();

        // If the code hash matches the new implementation then we return early.
        if (keccak256(_code) == _getAccountCodeHash(implementation)) {
            return;
        }

        // Create the deploycode by appending the magic prefix.
        bytes memory deploycode = abi.encodePacked(
            DEPLOY_CODE_PREFIX,
            _code
        );

        // Deploy the code and set the new implementation address.
        address newImplementation;
        assembly {
            newImplementation := create(0x0, add(deploycode, 0x20), mload(deploycode))
        }

        // Check that the code was actually deployed correctly. I'm not sure if you can ever
        // actually fail this check. Should only happen if the contract creation from above runs
        // out of gas but this parent execution thread does NOT run out of gas. Seems like we
        // should be doing this check anyway though.
        require(
            _getAccountCodeHash(newImplementation) == keccak256(_code),
            "L1ChugSplashProxy: code was not correctly deployed."
        );

        _setImplementation(newImplementation);
    }

    /**
     * Modifies some storage slot within the proxy contract. Gives us a lot of power to perform
     * upgrades in a more transparent way. Only callable by the owner.
     * @param _key Storage key to modify.
     * @param _value New value for the storage key.
     */
    function setStorage(
        bytes32 _key,
        bytes32 _value
    )
        proxyCallIfNotOwner
        public
    {
        assembly {
            sstore(_key, _value)
        }
    }

    /**
     * Changes the owner of the proxy contract. Only callable by the owner.
     * @param _owner New owner of the proxy contract.
     */
    function setOwner(
        address _owner
    )
        proxyCallIfNotOwner
        public
    {
        _setOwner(_owner);
    }

    /**
     * Queries the owner of the proxy contract. Can only be called by the owner OR by making an
     * eth_call and setting the "from" address to address(0).
     * @return Owner address.
     */
    function getOwner()
        proxyCallIfNotOwner
        public
        returns (
            address
        )
    {
        return _getOwner();
    }

    /**
     * Queries the implementation address. Can only be called by the owner OR by making an
     * eth_call and setting the "from" address to address(0).
     * @return Implementation address.
     */
    function getImplementation()
        proxyCallIfNotOwner
        public
        returns (
            address
        )
    {
        return _getImplementation();
    }


    /**********************
     * Internal Functions *
     **********************/

    /**
     * Sets the implementation address.
     * @param _implementation New implementation address.
     */
    function _setImplementation(
        address _implementation
    )
        internal
    {
        assembly {
            sstore(IMPLEMENTATION_KEY, _implementation)
        }
    }

    /**
     * Queries the implementation address.
     * @return Implementation address.
     */
    function _getImplementation()
        internal
        view
        returns (
            address
        )
    {
        address implementation;
        assembly {
            implementation := sload(IMPLEMENTATION_KEY)
        }
        return implementation;
    }

    /**
     * Changes the owner of the proxy contract.
     * @param _owner New owner of the proxy contract.
     */
    function _setOwner(
        address _owner
    )
        internal
    {
        assembly {
            sstore(OWNER_KEY, _owner)
        }
    }

    /**
     * Queries the owner of the proxy contract.
     * @return Owner address.
     */
    function _getOwner()
        internal
        view 
        returns (
            address
        )
    {
        address owner;
        assembly {
            owner := sload(OWNER_KEY)
        }
        return owner;
    }

    /**
     * Gets the code hash for a given account.
     * @param _account Address of the account to get a code hash for.
     * @return Code hash for the account.
     */
    function _getAccountCodeHash(
        address _account
    )
        internal
        view
        returns (
            bytes32
        )
    {
        bytes32 codeHash;
        assembly {
            codeHash := extcodehash(_account)
        }
        return codeHash;
    }

    /**
     * Performs the proxy call via a delegatecall.
     */
    function _doProxyCall()
        onlyWhenNotPaused
        internal
    {
        address implementation = _getImplementation();

        require(
            implementation != address(0),
            "L1ChugSplashProxy: implementation is not set yet"
        );

        assembly {
            // Copy calldata into memory at 0x0....calldatasize.
            calldatacopy(0x0, 0x0, calldatasize())

            // Perform the delegatecall, make sure to pass all available gas.
            let success := delegatecall(gas(), implementation, 0x0, calldatasize(), 0x0, 0x0)

            // Copy returndata into memory at 0x0....returndatasize. Note that this *will*
            // overwrite the calldata that we just copied into memory but that doesn't really
            // matter because we'll be returning in a second anyway.
            returndatacopy(0x0, 0x0, returndatasize())
            
            // Success == 0 means a revert. We'll revert too and pass the data up.
            if iszero(success) {
                revert(0x0, returndatasize())
            }

            // Otherwise we'll just return and pass the data up.
            return(0x0, returndatasize())
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.8.0;

/**
 * @title iL1ChugSplashDeployer
 */
interface iL1ChugSplashDeployer {
    function isUpgrading()
        external
        view
        returns (
            bool
        );
}

{
  "compilationTarget": {
    "contracts/chugsplash/L1ChugSplashProxy.sol": "L1ChugSplashProxy"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}