// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Arrays.sol)

pragma solidity ^0.8.20;

import {StorageSlot} from "./StorageSlot.sol";
import {Math} from "./math/Math.sol";

/**
 * @dev Collection of functions related to array types.
 */
library Arrays {
    using StorageSlot for bytes32;

    /**
     * @dev Searches a sorted `array` and returns the first index that contains
     * a value greater or equal to `element`. If no such index exists (i.e. all
     * values in the array are strictly less than `element`), the array length is
     * returned. Time complexity O(log n).
     *
     * `array` is expected to be sorted in ascending order, and to contain no
     * repeated elements.
     */
    function findUpperBound(uint256[] storage array, uint256 element) internal view returns (uint256) {
        uint256 low = 0;
        uint256 high = array.length;

        if (high == 0) {
            return 0;
        }

        while (low < high) {
            uint256 mid = Math.average(low, high);

            // Note that mid will always be strictly less than high (i.e. it will be a valid array index)
            // because Math.average rounds towards zero (it does integer division with truncation).
            if (unsafeAccess(array, mid).value > element) {
                high = mid;
            } else {
                low = mid + 1;
            }
        }

        // At this point `low` is the exclusive upper bound. We will return the inclusive upper bound.
        if (low > 0 && unsafeAccess(array, low - 1).value == element) {
            return low - 1;
        } else {
            return low;
        }
    }

    /**
     * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
     *
     * WARNING: Only use if you are certain `pos` is lower than the array length.
     */
    function unsafeAccess(address[] storage arr, uint256 pos) internal pure returns (StorageSlot.AddressSlot storage) {
        bytes32 slot;
        // We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr`
        // following https://docs.soliditylang.org/en/v0.8.20/internals/layout_in_storage.html#mappings-and-dynamic-arrays.

        /// @solidity memory-safe-assembly
        assembly {
            mstore(0, arr.slot)
            slot := add(keccak256(0, 0x20), pos)
        }
        return slot.getAddressSlot();
    }

    /**
     * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
     *
     * WARNING: Only use if you are certain `pos` is lower than the array length.
     */
    function unsafeAccess(bytes32[] storage arr, uint256 pos) internal pure returns (StorageSlot.Bytes32Slot storage) {
        bytes32 slot;
        // We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr`
        // following https://docs.soliditylang.org/en/v0.8.20/internals/layout_in_storage.html#mappings-and-dynamic-arrays.

        /// @solidity memory-safe-assembly
        assembly {
            mstore(0, arr.slot)
            slot := add(keccak256(0, 0x20), pos)
        }
        return slot.getBytes32Slot();
    }

    /**
     * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
     *
     * WARNING: Only use if you are certain `pos` is lower than the array length.
     */
    function unsafeAccess(uint256[] storage arr, uint256 pos) internal pure returns (StorageSlot.Uint256Slot storage) {
        bytes32 slot;
        // We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr`
        // following https://docs.soliditylang.org/en/v0.8.20/internals/layout_in_storage.html#mappings-and-dynamic-arrays.

        /// @solidity memory-safe-assembly
        assembly {
            mstore(0, arr.slot)
            slot := add(keccak256(0, 0x20), pos)
        }
        return slot.getUint256Slot();
    }

    /**
     * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
     *
     * WARNING: Only use if you are certain `pos` is lower than the array length.
     */
    function unsafeMemoryAccess(uint256[] memory arr, uint256 pos) internal pure returns (uint256 res) {
        assembly {
            res := mload(add(add(arr, 0x20), mul(pos, 0x20)))
        }
    }

    /**
     * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
     *
     * WARNING: Only use if you are certain `pos` is lower than the array length.
     */
    function unsafeMemoryAccess(address[] memory arr, uint256 pos) internal pure returns (address res) {
        assembly {
            res := mload(add(add(arr, 0x20), mul(pos, 0x20)))
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

import {ERC721ShipyardRedeemableMintable} from "./ERC721ShipyardRedeemableMintable.sol";

contract BurnieTheFlame is ERC721ShipyardRedeemableMintable {
    /// @dev Store the token URI number for each token id.
    mapping(uint256 => uint256) internal tokenURINumbers;

    constructor() ERC721ShipyardRedeemableMintable("Burnie The Flame: OpenSea Redeemable Example", "BRNIE") {}

    /**
     * @notice Hook to set tokenURINumber on mint.
     */
    function _beforeTokenTransfer(address from, address, /* to */ uint256 id) internal virtual override {
        // Set tokenURINumbers on mint.
        if (from == address(0)) {
            // 60% chance of tokenURI 1
            // 30% chance of tokenURI 2
            // 10% chance of tokenURI 3
            uint256 randomness = (uint256(keccak256(abi.encode(block.prevrandao))) % 100) + 1;

            uint256 tokenURINumber = 1;
            if (randomness >= 60 && randomness < 90) {
                tokenURINumber = 2;
            } else if (randomness >= 90) {
                tokenURINumber = 3;
            }

            tokenURINumbers[id] = tokenURINumber;
        }
    }

    /*
     * @notice Overrides the `tokenURI()` function to return baseURI + 1, 2, or 3
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        if (!_exists(tokenId)) revert TokenDoesNotExist();
        uint256 tokenURINumber = tokenURINumbers[tokenId];
        return string(abi.encodePacked(baseURI, _toString(tokenURINumber)));
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

enum OrderType {
    // 0: no partial fills, anyone can execute
    FULL_OPEN,

    // 1: partial fills supported, anyone can execute
    PARTIAL_OPEN,

    // 2: no partial fills, only offerer or zone can execute
    FULL_RESTRICTED,

    // 3: partial fills supported, only offerer or zone can execute
    PARTIAL_RESTRICTED,

    // 4: contract order type
    CONTRACT
}

enum BasicOrderType {
    // 0: no partial fills, anyone can execute
    ETH_TO_ERC721_FULL_OPEN,

    // 1: partial fills supported, anyone can execute
    ETH_TO_ERC721_PARTIAL_OPEN,

    // 2: no partial fills, only offerer or zone can execute
    ETH_TO_ERC721_FULL_RESTRICTED,

    // 3: partial fills supported, only offerer or zone can execute
    ETH_TO_ERC721_PARTIAL_RESTRICTED,

    // 4: no partial fills, anyone can execute
    ETH_TO_ERC1155_FULL_OPEN,

    // 5: partial fills supported, anyone can execute
    ETH_TO_ERC1155_PARTIAL_OPEN,

    // 6: no partial fills, only offerer or zone can execute
    ETH_TO_ERC1155_FULL_RESTRICTED,

    // 7: partial fills supported, only offerer or zone can execute
    ETH_TO_ERC1155_PARTIAL_RESTRICTED,

    // 8: no partial fills, anyone can execute
    ERC20_TO_ERC721_FULL_OPEN,

    // 9: partial fills supported, anyone can execute
    ERC20_TO_ERC721_PARTIAL_OPEN,

    // 10: no partial fills, only offerer or zone can execute
    ERC20_TO_ERC721_FULL_RESTRICTED,

    // 11: partial fills supported, only offerer or zone can execute
    ERC20_TO_ERC721_PARTIAL_RESTRICTED,

    // 12: no partial fills, anyone can execute
    ERC20_TO_ERC1155_FULL_OPEN,

    // 13: partial fills supported, anyone can execute
    ERC20_TO_ERC1155_PARTIAL_OPEN,

    // 14: no partial fills, only offerer or zone can execute
    ERC20_TO_ERC1155_FULL_RESTRICTED,

    // 15: partial fills supported, only offerer or zone can execute
    ERC20_TO_ERC1155_PARTIAL_RESTRICTED,

    // 16: no partial fills, anyone can execute
    ERC721_TO_ERC20_FULL_OPEN,

    // 17: partial fills supported, anyone can execute
    ERC721_TO_ERC20_PARTIAL_OPEN,

    // 18: no partial fills, only offerer or zone can execute
    ERC721_TO_ERC20_FULL_RESTRICTED,

    // 19: partial fills supported, only offerer or zone can execute
    ERC721_TO_ERC20_PARTIAL_RESTRICTED,

    // 20: no partial fills, anyone can execute
    ERC1155_TO_ERC20_FULL_OPEN,

    // 21: partial fills supported, anyone can execute
    ERC1155_TO_ERC20_PARTIAL_OPEN,

    // 22: no partial fills, only offerer or zone can execute
    ERC1155_TO_ERC20_FULL_RESTRICTED,

    // 23: partial fills supported, only offerer or zone can execute
    ERC1155_TO_ERC20_PARTIAL_RESTRICTED
}

enum BasicOrderRouteType {
    // 0: provide Ether (or other native token) to receive offered ERC721 item.
    ETH_TO_ERC721,

    // 1: provide Ether (or other native token) to receive offered ERC1155 item.
    ETH_TO_ERC1155,

    // 2: provide ERC20 item to receive offered ERC721 item.
    ERC20_TO_ERC721,

    // 3: provide ERC20 item to receive offered ERC1155 item.
    ERC20_TO_ERC1155,

    // 4: provide ERC721 item to receive offered ERC20 item.
    ERC721_TO_ERC20,

    // 5: provide ERC1155 item to receive offered ERC20 item.
    ERC1155_TO_ERC20
}

enum ItemType {
    // 0: ETH on mainnet, MATIC on polygon, etc.
    NATIVE,

    // 1: ERC20 items (ERC777 and ERC20 analogues could also technically work)
    ERC20,

    // 2: ERC721 items
    ERC721,

    // 3: ERC1155 items
    ERC1155,

    // 4: ERC721 items where a number of tokenIds are supported
    ERC721_WITH_CRITERIA,

    // 5: ERC1155 items where a number of ids are supported
    ERC1155_WITH_CRITERIA
}

enum Side {
    // 0: Items that can be spent
    OFFER,

    // 1: Items that must be received
    CONSIDERATION
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {
    BasicOrderType,
    ItemType,
    OrderType,
    Side
} from "./ConsiderationEnums.sol";

import {
    CalldataPointer,
    MemoryPointer
} from "../helpers/PointerLibraries.sol";

/**
 * @dev An order contains eleven components: an offerer, a zone (or account that
 *      can cancel the order or restrict who can fulfill the order depending on
 *      the type), the order type (specifying partial fill support as well as
 *      restricted order status), the start and end time, a hash that will be
 *      provided to the zone when validating restricted orders, a salt, a key
 *      corresponding to a given conduit, a counter, and an arbitrary number of
 *      offer items that can be spent along with consideration items that must
 *      be received by their respective recipient.
 */
struct OrderComponents {
    address offerer;
    address zone;
    OfferItem[] offer;
    ConsiderationItem[] consideration;
    OrderType orderType;
    uint256 startTime;
    uint256 endTime;
    bytes32 zoneHash;
    uint256 salt;
    bytes32 conduitKey;
    uint256 counter;
}

/**
 * @dev An offer item has five components: an item type (ETH or other native
 *      tokens, ERC20, ERC721, and ERC1155, as well as criteria-based ERC721 and
 *      ERC1155), a token address, a dual-purpose "identifierOrCriteria"
 *      component that will either represent a tokenId or a merkle root
 *      depending on the item type, and a start and end amount that support
 *      increasing or decreasing amounts over the duration of the respective
 *      order.
 */
struct OfferItem {
    ItemType itemType;
    address token;
    uint256 identifierOrCriteria;
    uint256 startAmount;
    uint256 endAmount;
}

/**
 * @dev A consideration item has the same five components as an offer item and
 *      an additional sixth component designating the required recipient of the
 *      item.
 */
struct ConsiderationItem {
    ItemType itemType;
    address token;
    uint256 identifierOrCriteria;
    uint256 startAmount;
    uint256 endAmount;
    address payable recipient;
}

/**
 * @dev A spent item is translated from a utilized offer item and has four
 *      components: an item type (ETH or other native tokens, ERC20, ERC721, and
 *      ERC1155), a token address, a tokenId, and an amount.
 */
struct SpentItem {
    ItemType itemType;
    address token;
    uint256 identifier;
    uint256 amount;
}

/**
 * @dev A received item is translated from a utilized consideration item and has
 *      the same four components as a spent item, as well as an additional fifth
 *      component designating the required recipient of the item.
 */
struct ReceivedItem {
    ItemType itemType;
    address token;
    uint256 identifier;
    uint256 amount;
    address payable recipient;
}

/**
 * @dev For basic orders involving ETH / native / ERC20 <=> ERC721 / ERC1155
 *      matching, a group of six functions may be called that only requires a
 *      subset of the usual order arguments. Note the use of a "basicOrderType"
 *      enum; this represents both the usual order type as well as the "route"
 *      of the basic order (a simple derivation function for the basic order
 *      type is `basicOrderType = orderType + (4 * basicOrderRoute)`.)
 */
struct BasicOrderParameters {
    // calldata offset
    address considerationToken; // 0x24
    uint256 considerationIdentifier; // 0x44
    uint256 considerationAmount; // 0x64
    address payable offerer; // 0x84
    address zone; // 0xa4
    address offerToken; // 0xc4
    uint256 offerIdentifier; // 0xe4
    uint256 offerAmount; // 0x104
    BasicOrderType basicOrderType; // 0x124
    uint256 startTime; // 0x144
    uint256 endTime; // 0x164
    bytes32 zoneHash; // 0x184
    uint256 salt; // 0x1a4
    bytes32 offererConduitKey; // 0x1c4
    bytes32 fulfillerConduitKey; // 0x1e4
    uint256 totalOriginalAdditionalRecipients; // 0x204
    AdditionalRecipient[] additionalRecipients; // 0x224
    bytes signature; // 0x244
    // Total length, excluding dynamic array data: 0x264 (580)
}

/**
 * @dev Basic orders can supply any number of additional recipients, with the
 *      implied assumption that they are supplied from the offered ETH (or other
 *      native token) or ERC20 token for the order.
 */
struct AdditionalRecipient {
    uint256 amount;
    address payable recipient;
}

/**
 * @dev The full set of order components, with the exception of the counter,
 *      must be supplied when fulfilling more sophisticated orders or groups of
 *      orders. The total number of original consideration items must also be
 *      supplied, as the caller may specify additional consideration items.
 */
struct OrderParameters {
    address offerer; // 0x00
    address zone; // 0x20
    OfferItem[] offer; // 0x40
    ConsiderationItem[] consideration; // 0x60
    OrderType orderType; // 0x80
    uint256 startTime; // 0xa0
    uint256 endTime; // 0xc0
    bytes32 zoneHash; // 0xe0
    uint256 salt; // 0x100
    bytes32 conduitKey; // 0x120
    uint256 totalOriginalConsiderationItems; // 0x140
    // offer.length                          // 0x160
}

/**
 * @dev Orders require a signature in addition to the other order parameters.
 */
struct Order {
    OrderParameters parameters;
    bytes signature;
}

/**
 * @dev Advanced orders include a numerator (i.e. a fraction to attempt to fill)
 *      and a denominator (the total size of the order) in addition to the
 *      signature and other order parameters. It also supports an optional field
 *      for supplying extra data; this data will be provided to the zone if the
 *      order type is restricted and the zone is not the caller, or will be
 *      provided to the offerer as context for contract order types.
 */
struct AdvancedOrder {
    OrderParameters parameters;
    uint120 numerator;
    uint120 denominator;
    bytes signature;
    bytes extraData;
}

/**
 * @dev Orders can be validated (either explicitly via `validate`, or as a
 *      consequence of a full or partial fill), specifically cancelled (they can
 *      also be cancelled in bulk via incrementing a per-zone counter), and
 *      partially or fully filled (with the fraction filled represented by a
 *      numerator and denominator).
 */
struct OrderStatus {
    bool isValidated;
    bool isCancelled;
    uint120 numerator;
    uint120 denominator;
}

/**
 * @dev A criteria resolver specifies an order, side (offer vs. consideration),
 *      and item index. It then provides a chosen identifier (i.e. tokenId)
 *      alongside a merkle proof demonstrating the identifier meets the required
 *      criteria.
 */
struct CriteriaResolver {
    uint256 orderIndex;
    Side side;
    uint256 index;
    uint256 identifier;
    bytes32[] criteriaProof;
}

/**
 * @dev A fulfillment is applied to a group of orders. It decrements a series of
 *      offer and consideration items, then generates a single execution
 *      element. A given fulfillment can be applied to as many offer and
 *      consideration items as desired, but must contain at least one offer and
 *      at least one consideration that match. The fulfillment must also remain
 *      consistent on all key parameters across all offer items (same offerer,
 *      token, type, tokenId, and conduit preference) as well as across all
 *      consideration items (token, type, tokenId, and recipient).
 */
struct Fulfillment {
    FulfillmentComponent[] offerComponents;
    FulfillmentComponent[] considerationComponents;
}

/**
 * @dev Each fulfillment component contains one index referencing a specific
 *      order and another referencing a specific offer or consideration item.
 */
struct FulfillmentComponent {
    uint256 orderIndex;
    uint256 itemIndex;
}

/**
 * @dev An execution is triggered once all consideration items have been zeroed
 *      out. It sends the item in question from the offerer to the item's
 *      recipient, optionally sourcing approvals from either this contract
 *      directly or from the offerer's chosen conduit if one is specified. An
 *      execution is not provided as an argument, but rather is derived via
 *      orders, criteria resolvers, and fulfillments (where the total number of
 *      executions will be less than or equal to the total number of indicated
 *      fulfillments) and returned as part of `matchOrders`.
 */
struct Execution {
    ReceivedItem item;
    address offerer;
    bytes32 conduitKey;
}

/**
 * @dev Restricted orders are validated post-execution by calling validateOrder
 *      on the zone. This struct provides context about the order fulfillment
 *      and any supplied extraData, as well as all order hashes fulfilled in a
 *      call to a match or fulfillAvailable method.
 */
struct ZoneParameters {
    bytes32 orderHash;
    address fulfiller;
    address offerer;
    SpentItem[] offer;
    ReceivedItem[] consideration;
    bytes extraData;
    bytes32[] orderHashes;
    uint256 startTime;
    uint256 endTime;
    bytes32 zoneHash;
}

/**
 * @dev Zones and contract offerers can communicate which schemas they implement
 *      along with any associated metadata related to each schema.
 */
struct Schema {
    uint256 id;
    bytes metadata;
}

using StructPointers for OrderComponents global;
using StructPointers for OfferItem global;
using StructPointers for ConsiderationItem global;
using StructPointers for SpentItem global;
using StructPointers for ReceivedItem global;
using StructPointers for BasicOrderParameters global;
using StructPointers for AdditionalRecipient global;
using StructPointers for OrderParameters global;
using StructPointers for Order global;
using StructPointers for AdvancedOrder global;
using StructPointers for OrderStatus global;
using StructPointers for CriteriaResolver global;
using StructPointers for Fulfillment global;
using StructPointers for FulfillmentComponent global;
using StructPointers for Execution global;
using StructPointers for ZoneParameters global;

/**
 * @dev This library provides a set of functions for converting structs to
 *      pointers.
 */
library StructPointers {
    /**
     * @dev Get a MemoryPointer from OrderComponents.
     *
     * @param obj The OrderComponents object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        OrderComponents memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from OrderComponents.
     *
     * @param obj The OrderComponents object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        OrderComponents calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from OfferItem.
     *
     * @param obj The OfferItem object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        OfferItem memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from OfferItem.
     *
     * @param obj The OfferItem object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        OfferItem calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from ConsiderationItem.
     *
     * @param obj The ConsiderationItem object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        ConsiderationItem memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from ConsiderationItem.
     *
     * @param obj The ConsiderationItem object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        ConsiderationItem calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from SpentItem.
     *
     * @param obj The SpentItem object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        SpentItem memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from SpentItem.
     *
     * @param obj The SpentItem object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        SpentItem calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from ReceivedItem.
     *
     * @param obj The ReceivedItem object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        ReceivedItem memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from ReceivedItem.
     *
     * @param obj The ReceivedItem object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        ReceivedItem calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from BasicOrderParameters.
     *
     * @param obj The BasicOrderParameters object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        BasicOrderParameters memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from BasicOrderParameters.
     *
     * @param obj The BasicOrderParameters object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        BasicOrderParameters calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from AdditionalRecipient.
     *
     * @param obj The AdditionalRecipient object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        AdditionalRecipient memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from AdditionalRecipient.
     *
     * @param obj The AdditionalRecipient object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        AdditionalRecipient calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from OrderParameters.
     *
     * @param obj The OrderParameters object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        OrderParameters memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from OrderParameters.
     *
     * @param obj The OrderParameters object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        OrderParameters calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from Order.
     *
     * @param obj The Order object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        Order memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from Order.
     *
     * @param obj The Order object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        Order calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from AdvancedOrder.
     *
     * @param obj The AdvancedOrder object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        AdvancedOrder memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from AdvancedOrder.
     *
     * @param obj The AdvancedOrder object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        AdvancedOrder calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from OrderStatus.
     *
     * @param obj The OrderStatus object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        OrderStatus memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from OrderStatus.
     *
     * @param obj The OrderStatus object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        OrderStatus calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from CriteriaResolver.
     *
     * @param obj The CriteriaResolver object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        CriteriaResolver memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from CriteriaResolver.
     *
     * @param obj The CriteriaResolver object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        CriteriaResolver calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from Fulfillment.
     *
     * @param obj The Fulfillment object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        Fulfillment memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from Fulfillment.
     *
     * @param obj The Fulfillment object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        Fulfillment calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from FulfillmentComponent.
     *
     * @param obj The FulfillmentComponent object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        FulfillmentComponent memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from FulfillmentComponent.
     *
     * @param obj The FulfillmentComponent object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        FulfillmentComponent calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from Execution.
     *
     * @param obj The Execution object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        Execution memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from Execution.
     *
     * @param obj The Execution object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        Execution calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a MemoryPointer from ZoneParameters.
     *
     * @param obj The ZoneParameters object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        ZoneParameters memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }

    /**
     * @dev Get a CalldataPointer from ZoneParameters.
     *
     * @param obj The ZoneParameters object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        ZoneParameters calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;

/// @dev The canonical OpenSea conduit.
address constant CONDUIT = 0x1E0049783F008A0085193E00003D00cd54003c71;
/// @dev `keccak256(bytes("ApprovalForAll(address,address,bool)"))`.
uint256 constant _APPROVAL_FOR_ALL_EVENT_SIGNATURE = 0x17307eab39ab6107e8899845ad3d59bd9653f200f220920489ca2b5937696c31;
/// @dev Pre-shifted and pre-masked constant.
uint256 constant SOLADY_ERC721_MASTER_SLOT_SEED_MASKED = 0x0a5a2e7a00000000;
/// @dev Solady ERC1155 master slot seed.
uint256 constant SOLADY_ERC1155_MASTER_SLOT_SEED = 0x9a31110384e0b0c9;
/// @dev `keccak256(bytes("TransferSingle(address,address,address,uint256,uint256)"))`.
uint256 constant SOLADY_TRANSFER_SINGLE_EVENT_SIGNATURE =
    0xc3d58168c5ae7397731d063d5bbf3d657854427343f4c083240f7aacaa2d0f62;

/// @dev `keccak256(bytes("TransferBatch(address,address,address,uint256[],uint256[])"))`.
uint256 constant SOLADY_TRANSFER_BATCH_EVENT_SIGNATURE =
    0x4a39dc06d4c0dbc64b70af90fd698a233a518aa5d07e595d983b8c0526c8f7fb;

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

import {EnumerableSet} from "openzeppelin-contracts/contracts/utils/structs/EnumerableSet.sol";
import {IERC7496} from "./interfaces/IERC7496.sol";

contract DynamicTraits is IERC7496 {
    using EnumerableSet for EnumerableSet.Bytes32Set;

    /// @notice Thrown when a new trait value is not different from the existing value
    error TraitValueUnchanged();

    /// @notice An enumerable set of all trait keys that have been set
    EnumerableSet.Bytes32Set internal _traitKeys;

    /// @notice A mapping of token ID to a mapping of trait key to trait value
    mapping(uint256 tokenId => mapping(bytes32 traitKey => bytes32 traitValue)) internal _traits;

    /// @notice An offchain string URI that points to a JSON file containing trait metadata
    string internal _traitMetadataURI;

    /**
     * @notice Get the value of a trait for a given token ID.
     * @param tokenId The token ID to get the trait value for
     * @param traitKey The trait key to get the value of
     */
    function getTraitValue(uint256 tokenId, bytes32 traitKey) public view virtual returns (bytes32 traitValue) {
        traitValue = _traits[tokenId][traitKey];
    }

    /**
     * @notice Get the values of traits for a given token ID.
     * @param tokenId The token ID to get the trait values for
     * @param traitKeys The trait keys to get the values of
     */
    function getTraitValues(uint256 tokenId, bytes32[] calldata traitKeys)
        public
        view
        virtual
        returns (bytes32[] memory traitValues)
    {
        uint256 length = traitKeys.length;
        traitValues = new bytes32[](length);
        for (uint256 i = 0; i < length;) {
            bytes32 traitKey = traitKeys[i];
            traitValues[i] = getTraitValue(tokenId, traitKey);
            unchecked {
                ++i;
            }
        }
    }

    /**
     * @notice Get the URI for the trait metadata
     */
    function getTraitMetadataURI() external view virtual returns (string memory labelsURI) {
        return _traitMetadataURI;
    }

    /**
     * @notice Set the value of a trait for a given token ID.
     *         Reverts if the trait value is unchanged.
     * @dev    IMPORTANT: Override this method with access role restriction.
     * @param tokenId The token ID to set the trait value for
     * @param traitKey The trait key to set the value of
     * @param newValue The new trait value to set
     */
    function setTrait(uint256 tokenId, bytes32 traitKey, bytes32 newValue) public virtual {
        bytes32 existingValue = _traits[tokenId][traitKey];

        if (existingValue == newValue) {
            revert TraitValueUnchanged();
        }

        // no-op if exists
        _traitKeys.add(traitKey);

        _traits[tokenId][traitKey] = newValue;

        emit TraitUpdated(traitKey, tokenId, newValue);
    }

    /**
     * @notice Set the URI for the trait metadata
     * @param uri The new URI to set
     */
    function _setTraitMetadataURI(string calldata uri) internal virtual {
        _traitMetadataURI = uri;
        emit TraitMetadataURIUpdated();
    }

    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC7496).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC1155/ERC1155.sol)

pragma solidity ^0.8.20;

import {IERC1155} from "./IERC1155.sol";
import {IERC1155Receiver} from "./IERC1155Receiver.sol";
import {IERC1155MetadataURI} from "./extensions/IERC1155MetadataURI.sol";
import {Context} from "../../utils/Context.sol";
import {IERC165, ERC165} from "../../utils/introspection/ERC165.sol";
import {Arrays} from "../../utils/Arrays.sol";
import {IERC1155Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of the basic standard multi-token.
 * See https://eips.ethereum.org/EIPS/eip-1155
 * Originally based on code by Enjin: https://github.com/enjin/erc-1155
 */
abstract contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI, IERC1155Errors {
    using Arrays for uint256[];
    using Arrays for address[];

    mapping(uint256 id => mapping(address account => uint256)) private _balances;

    mapping(address account => mapping(address operator => bool)) private _operatorApprovals;

    // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
    string private _uri;

    /**
     * @dev See {_setURI}.
     */
    constructor(string memory uri_) {
        _setURI(uri_);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC1155).interfaceId ||
            interfaceId == type(IERC1155MetadataURI).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\{id\}` substring with the
     * actual token type ID.
     */
    function uri(uint256 /* id */) public view virtual returns (string memory) {
        return _uri;
    }

    /**
     * @dev See {IERC1155-balanceOf}.
     */
    function balanceOf(address account, uint256 id) public view virtual returns (uint256) {
        return _balances[id][account];
    }

    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(
        address[] memory accounts,
        uint256[] memory ids
    ) public view virtual returns (uint256[] memory) {
        if (accounts.length != ids.length) {
            revert ERC1155InvalidArrayLength(ids.length, accounts.length);
        }

        uint256[] memory batchBalances = new uint256[](accounts.length);

        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts.unsafeMemoryAccess(i), ids.unsafeMemoryAccess(i));
        }

        return batchBalances;
    }

    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual returns (bool) {
        return _operatorApprovals[account][operator];
    }

    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 id, uint256 value, bytes memory data) public virtual {
        address sender = _msgSender();
        if (from != sender && !isApprovedForAll(from, sender)) {
            revert ERC1155MissingApprovalForAll(sender, from);
        }
        _safeTransferFrom(from, to, id, value, data);
    }

    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory values,
        bytes memory data
    ) public virtual {
        address sender = _msgSender();
        if (from != sender && !isApprovedForAll(from, sender)) {
            revert ERC1155MissingApprovalForAll(sender, from);
        }
        _safeBatchTransferFrom(from, to, ids, values, data);
    }

    /**
     * @dev Transfers a `value` amount of tokens of type `id` from `from` to `to`. Will mint (or burn) if `from`
     * (or `to`) is the zero address.
     *
     * Emits a {TransferSingle} event if the arrays contain one element, and {TransferBatch} otherwise.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement either {IERC1155Receiver-onERC1155Received}
     *   or {IERC1155Receiver-onERC1155BatchReceived} and return the acceptance magic value.
     * - `ids` and `values` must have the same length.
     *
     * NOTE: The ERC-1155 acceptance check is not performed in this function. See {_updateWithAcceptanceCheck} instead.
     */
    function _update(address from, address to, uint256[] memory ids, uint256[] memory values) internal virtual {
        if (ids.length != values.length) {
            revert ERC1155InvalidArrayLength(ids.length, values.length);
        }

        address operator = _msgSender();

        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids.unsafeMemoryAccess(i);
            uint256 value = values.unsafeMemoryAccess(i);

            if (from != address(0)) {
                uint256 fromBalance = _balances[id][from];
                if (fromBalance < value) {
                    revert ERC1155InsufficientBalance(from, fromBalance, value, id);
                }
                unchecked {
                    // Overflow not possible: value <= fromBalance
                    _balances[id][from] = fromBalance - value;
                }
            }

            if (to != address(0)) {
                _balances[id][to] += value;
            }
        }

        if (ids.length == 1) {
            uint256 id = ids.unsafeMemoryAccess(0);
            uint256 value = values.unsafeMemoryAccess(0);
            emit TransferSingle(operator, from, to, id, value);
        } else {
            emit TransferBatch(operator, from, to, ids, values);
        }
    }

    /**
     * @dev Version of {_update} that performs the token acceptance check by calling
     * {IERC1155Receiver-onERC1155Received} or {IERC1155Receiver-onERC1155BatchReceived} on the receiver address if it
     * contains code (eg. is a smart contract at the moment of execution).
     *
     * IMPORTANT: Overriding this function is discouraged because it poses a reentrancy risk from the receiver. So any
     * update to the contract state after this function would break the check-effect-interaction pattern. Consider
     * overriding {_update} instead.
     */
    function _updateWithAcceptanceCheck(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory values,
        bytes memory data
    ) internal virtual {
        _update(from, to, ids, values);
        if (to != address(0)) {
            address operator = _msgSender();
            if (ids.length == 1) {
                uint256 id = ids.unsafeMemoryAccess(0);
                uint256 value = values.unsafeMemoryAccess(0);
                _doSafeTransferAcceptanceCheck(operator, from, to, id, value, data);
            } else {
                _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, values, data);
            }
        }
    }

    /**
     * @dev Transfers a `value` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `from` must have a balance of tokens of type `id` of at least `value` amount.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(address from, address to, uint256 id, uint256 value, bytes memory data) internal {
        if (to == address(0)) {
            revert ERC1155InvalidReceiver(address(0));
        }
        if (from == address(0)) {
            revert ERC1155InvalidSender(address(0));
        }
        (uint256[] memory ids, uint256[] memory values) = _asSingletonArrays(id, value);
        _updateWithAcceptanceCheck(from, to, ids, values, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     * - `ids` and `values` must have the same length.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory values,
        bytes memory data
    ) internal {
        if (to == address(0)) {
            revert ERC1155InvalidReceiver(address(0));
        }
        if (from == address(0)) {
            revert ERC1155InvalidSender(address(0));
        }
        _updateWithAcceptanceCheck(from, to, ids, values, data);
    }

    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\{id\}` substring in either the
     * URI or any of the values in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\{id\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        _uri = newuri;
    }

    /**
     * @dev Creates a `value` amount of tokens of type `id`, and assigns them to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(address to, uint256 id, uint256 value, bytes memory data) internal {
        if (to == address(0)) {
            revert ERC1155InvalidReceiver(address(0));
        }
        (uint256[] memory ids, uint256[] memory values) = _asSingletonArrays(id, value);
        _updateWithAcceptanceCheck(address(0), to, ids, values, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `values` must have the same length.
     * - `to` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _mintBatch(address to, uint256[] memory ids, uint256[] memory values, bytes memory data) internal {
        if (to == address(0)) {
            revert ERC1155InvalidReceiver(address(0));
        }
        _updateWithAcceptanceCheck(address(0), to, ids, values, data);
    }

    /**
     * @dev Destroys a `value` amount of tokens of type `id` from `from`
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `value` amount of tokens of type `id`.
     */
    function _burn(address from, uint256 id, uint256 value) internal {
        if (from == address(0)) {
            revert ERC1155InvalidSender(address(0));
        }
        (uint256[] memory ids, uint256[] memory values) = _asSingletonArrays(id, value);
        _updateWithAcceptanceCheck(from, address(0), ids, values, "");
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `value` amount of tokens of type `id`.
     * - `ids` and `values` must have the same length.
     */
    function _burnBatch(address from, uint256[] memory ids, uint256[] memory values) internal {
        if (from == address(0)) {
            revert ERC1155InvalidSender(address(0));
        }
        _updateWithAcceptanceCheck(from, address(0), ids, values, "");
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the zero address.
     */
    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {
        if (operator == address(0)) {
            revert ERC1155InvalidOperator(address(0));
        }
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Performs an acceptance check by calling {IERC1155-onERC1155Received} on the `to` address
     * if it contains code at the moment of execution.
     */
    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 value,
        bytes memory data
    ) private {
        if (to.code.length > 0) {
            try IERC1155Receiver(to).onERC1155Received(operator, from, id, value, data) returns (bytes4 response) {
                if (response != IERC1155Receiver.onERC1155Received.selector) {
                    // Tokens rejected
                    revert ERC1155InvalidReceiver(to);
                }
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    // non-ERC1155Receiver implementer
                    revert ERC1155InvalidReceiver(to);
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        }
    }

    /**
     * @dev Performs a batch acceptance check by calling {IERC1155-onERC1155BatchReceived} on the `to` address
     * if it contains code at the moment of execution.
     */
    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory values,
        bytes memory data
    ) private {
        if (to.code.length > 0) {
            try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, values, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
                    // Tokens rejected
                    revert ERC1155InvalidReceiver(to);
                }
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    // non-ERC1155Receiver implementer
                    revert ERC1155InvalidReceiver(to);
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        }
    }

    /**
     * @dev Creates an array in memory with only one value for each of the elements provided.
     */
    function _asSingletonArrays(
        uint256 element1,
        uint256 element2
    ) private pure returns (uint256[] memory array1, uint256[] memory array2) {
        /// @solidity memory-safe-assembly
        assembly {
            // Load the free memory pointer
            array1 := mload(0x40)
            // Set array length to 1
            mstore(array1, 1)
            // Store the single element at the next word after the length (where content starts)
            mstore(add(array1, 0x20), element1)

            // Repeat for next array locating it right after the first array
            array2 := add(array1, 0x40)
            mstore(array2, 1)
            mstore(add(array2, 0x20), element2)

            // Update the free memory pointer by pointing after the second array
            mstore(0x40, add(array2, 0x40))
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC1155/extensions/ERC1155Burnable.sol)

pragma solidity ^0.8.20;

import {ERC1155} from "../ERC1155.sol";

/**
 * @dev Extension of {ERC1155} that allows token holders to destroy both their
 * own tokens and those that they have been approved to use.
 */
abstract contract ERC1155Burnable is ERC1155 {
    function burn(address account, uint256 id, uint256 value) public virtual {
        if (account != _msgSender() && !isApprovedForAll(account, _msgSender())) {
            revert ERC1155MissingApprovalForAll(_msgSender(), account);
        }

        _burn(account, id, value);
    }

    function burnBatch(address account, uint256[] memory ids, uint256[] memory values) public virtual {
        if (account != _msgSender() && !isApprovedForAll(account, _msgSender())) {
            revert ERC1155MissingApprovalForAll(_msgSender(), account);
        }

        _burnBatch(account, ids, values);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Burnable.sol)

pragma solidity ^0.8.20;

import {ERC20} from "../ERC20.sol";
import {Context} from "../../../utils/Context.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys a `value` amount of tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 value) public virtual {
        _burn(_msgSender(), value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, deducting from
     * the caller's allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `value`.
     */
    function burnFrom(address account, uint256 value) public virtual {
        _spendAllowance(account, _msgSender(), value);
        _burn(account, value);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

/// @notice Simple ERC2981 NFT Royalty Standard implementation.
/// @author Solady (https://github.com/vectorized/solady/blob/main/src/tokens/ERC2981.sol)
/// @author Modified from OpenZeppelin (https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/common/ERC2981.sol)
abstract contract ERC2981 {
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                       CUSTOM ERRORS                        */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The royalty fee numerator exceeds the fee denominator.
    error RoyaltyOverflow();

    /// @dev The royalty receiver cannot be the zero address.
    error RoyaltyReceiverIsZeroAddress();

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                          STORAGE                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The default royalty info is given by:
    /// ```
    ///     let packed := sload(_ERC2981_MASTER_SLOT_SEED)
    ///     let receiver := shr(96, packed)
    ///     let royaltyFraction := xor(packed, shl(96, receiver))
    /// ```
    ///
    /// The per token royalty info is given by.
    /// ```
    ///     mstore(0x00, tokenId)
    ///     mstore(0x20, _ERC2981_MASTER_SLOT_SEED)
    ///     let packed := sload(keccak256(0x00, 0x40))
    ///     let receiver := shr(96, packed)
    ///     let royaltyFraction := xor(packed, shl(96, receiver))
    /// ```
    uint256 private constant _ERC2981_MASTER_SLOT_SEED = 0xaa4ec00224afccfdb7;

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                          ERC2981                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Checks that `_feeDenominator` is non-zero.
    constructor() {
        require(_feeDenominator() != 0, "Fee denominator cannot be zero.");
    }

    /// @dev Returns the denominator for the royalty amount.
    /// Defaults to 10000, which represents fees in basis points.
    /// Override this function to return a custom amount if needed.
    function _feeDenominator() internal pure virtual returns (uint96) {
        return 10000;
    }

    /// @dev Returns true if this contract implements the interface defined by `interfaceId`.
    /// See: https://eips.ethereum.org/EIPS/eip-165
    /// This function call must use less than 30000 gas.
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool result) {
        /// @solidity memory-safe-assembly
        assembly {
            let s := shr(224, interfaceId)
            // ERC165: 0x01ffc9a7, ERC2981: 0x2a55205a.
            result := or(eq(s, 0x01ffc9a7), eq(s, 0x2a55205a))
        }
    }

    /// @dev Returns the `receiver` and `royaltyAmount` for `tokenId` sold at `salePrice`.
    function royaltyInfo(uint256 tokenId, uint256 salePrice)
        public
        view
        virtual
        returns (address receiver, uint256 royaltyAmount)
    {
        uint256 feeDenominator = _feeDenominator();
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, tokenId)
            mstore(0x20, _ERC2981_MASTER_SLOT_SEED)
            let packed := sload(keccak256(0x00, 0x40))
            receiver := shr(96, packed)
            if iszero(receiver) {
                packed := sload(mload(0x20))
                receiver := shr(96, packed)
            }
            let x := salePrice
            let y := xor(packed, shl(96, receiver)) // `feeNumerator`.
            // Overflow check, equivalent to `require(y == 0 || x <= type(uint256).max / y)`.
            // Out-of-gas revert. Should not be triggered in practice, but included for safety.
            returndatacopy(returndatasize(), returndatasize(), mul(y, gt(x, div(not(0), y))))
            royaltyAmount := div(mul(x, y), feeDenominator)
        }
    }

    /// @dev Sets the default royalty `receiver` and `feeNumerator`.
    ///
    /// Requirements:
    /// - `receiver` must not be the zero address.
    /// - `feeNumerator` must not be greater than the fee denominator.
    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {
        uint256 feeDenominator = _feeDenominator();
        /// @solidity memory-safe-assembly
        assembly {
            feeNumerator := shr(160, shl(160, feeNumerator))
            if gt(feeNumerator, feeDenominator) {
                mstore(0x00, 0x350a88b3) // `RoyaltyOverflow()`.
                revert(0x1c, 0x04)
            }
            let packed := shl(96, receiver)
            if iszero(packed) {
                mstore(0x00, 0xb4457eaa) // `RoyaltyReceiverIsZeroAddress()`.
                revert(0x1c, 0x04)
            }
            sstore(_ERC2981_MASTER_SLOT_SEED, or(packed, feeNumerator))
        }
    }

    /// @dev Sets the default royalty `receiver` and `feeNumerator` to zero.
    function _deleteDefaultRoyalty() internal virtual {
        /// @solidity memory-safe-assembly
        assembly {
            sstore(_ERC2981_MASTER_SLOT_SEED, 0)
        }
    }

    /// @dev Sets the royalty `receiver` and `feeNumerator` for `tokenId`.
    ///
    /// Requirements:
    /// - `receiver` must not be the zero address.
    /// - `feeNumerator` must not be greater than the fee denominator.
    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator)
        internal
        virtual
    {
        uint256 feeDenominator = _feeDenominator();
        /// @solidity memory-safe-assembly
        assembly {
            feeNumerator := shr(160, shl(160, feeNumerator))
            if gt(feeNumerator, feeDenominator) {
                mstore(0x00, 0x350a88b3) // `RoyaltyOverflow()`.
                revert(0x1c, 0x04)
            }
            let packed := shl(96, receiver)
            if iszero(packed) {
                mstore(0x00, 0xb4457eaa) // `RoyaltyReceiverIsZeroAddress()`.
                revert(0x1c, 0x04)
            }
            mstore(0x00, tokenId)
            mstore(0x20, _ERC2981_MASTER_SLOT_SEED)
            sstore(keccak256(0x00, 0x40), or(packed, feeNumerator))
        }
    }

    /// @dev Sets the royalty `receiver` and `feeNumerator` for `tokenId` to zero.
    function _resetTokenRoyalty(uint256 tokenId) internal virtual {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, tokenId)
            mstore(0x20, _ERC2981_MASTER_SLOT_SEED)
            sstore(keccak256(0x00, 0x40), 0)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.20;

import {IERC721} from "./IERC721.sol";
import {IERC721Receiver} from "./IERC721Receiver.sol";
import {IERC721Metadata} from "./extensions/IERC721Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {Strings} from "../../utils/Strings.sol";
import {IERC165, ERC165} from "../../utils/introspection/ERC165.sol";
import {IERC721Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
abstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    mapping(uint256 tokenId => address) private _owners;

    mapping(address owner => uint256) private _balances;

    mapping(uint256 tokenId => address) private _tokenApprovals;

    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual returns (uint256) {
        if (owner == address(0)) {
            revert ERC721InvalidOwner(address(0));
        }
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual returns (address) {
        return _requireOwned(tokenId);
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {
        _requireOwned(tokenId);

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual {
        _approve(to, tokenId, _msgSender());
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual returns (address) {
        _requireOwned(tokenId);

        return _getApproved(tokenId);
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(address from, address to, uint256 tokenId) public virtual {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        // Setting an "auth" arguments enables the `_isAuthorized` check which verifies that the token exists
        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.
        address previousOwner = _update(to, tokenId, _msgSender());
        if (previousOwner != from) {
            revert ERC721IncorrectOwner(from, tokenId, previousOwner);
        }
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {
        transferFrom(from, to, tokenId);
        _checkOnERC721Received(from, to, tokenId, data);
    }

    /**
     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
     *
     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the
     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances
     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by
     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.
     */
    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
        return _owners[tokenId];
    }

    /**
     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.
     */
    function _getApproved(uint256 tokenId) internal view virtual returns (address) {
        return _tokenApprovals[tokenId];
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in
     * particular (ignoring whether it is owned by `owner`).
     *
     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this
     * assumption.
     */
    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {
        return
            spender != address(0) &&
            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);
    }

    /**
     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.
     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets
     * the `spender` for the specific `tokenId`.
     *
     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this
     * assumption.
     */
    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {
        if (!_isAuthorized(owner, spender, tokenId)) {
            if (owner == address(0)) {
                revert ERC721NonexistentToken(tokenId);
            } else {
                revert ERC721InsufficientApproval(spender, tokenId);
            }
        }
    }

    /**
     * @dev Unsafe write access to the balances, used by extensions that "mint" tokens using an {ownerOf} override.
     *
     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that
     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.
     *
     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the
     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership
     * remain consistent with one another.
     */
    function _increaseBalance(address account, uint128 value) internal virtual {
        unchecked {
            _balances[account] += value;
        }
    }

    /**
     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner
     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.
     *
     * The `auth` argument is optional. If the value passed is non 0, then this function will check that
     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).
     *
     * Emits a {Transfer} event.
     *
     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.
     */
    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {
        address from = _ownerOf(tokenId);

        // Perform (optional) operator check
        if (auth != address(0)) {
            _checkAuthorized(from, auth, tokenId);
        }

        // Execute the update
        if (from != address(0)) {
            // Clear approval. No need to re-authorize or emit the Approval event
            _approve(address(0), tokenId, address(0), false);

            unchecked {
                _balances[from] -= 1;
            }
        }

        if (to != address(0)) {
            unchecked {
                _balances[to] += 1;
            }
        }

        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);

        return from;
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        address previousOwner = _update(to, tokenId, address(0));
        if (previousOwner != address(0)) {
            revert ERC721InvalidSender(address(0));
        }
    }

    /**
     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {
        _mint(to, tokenId);
        _checkOnERC721Received(address(0), to, tokenId, data);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     * This is an internal function that does not check if the sender is authorized to operate on the token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal {
        address previousOwner = _update(address(0), tokenId, address(0));
        if (previousOwner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        }
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(address from, address to, uint256 tokenId) internal {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        address previousOwner = _update(to, tokenId, address(0));
        if (previousOwner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        } else if (previousOwner != from) {
            revert ERC721IncorrectOwner(from, tokenId, previousOwner);
        }
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients
     * are aware of the ERC721 standard to prevent tokens from being forever locked.
     *
     * `data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is like {safeTransferFrom} in the sense that it invokes
     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `tokenId` token must exist and be owned by `from`.
     * - `to` cannot be the zero address.
     * - `from` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(address from, address to, uint256 tokenId) internal {
        _safeTransfer(from, to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {
        _transfer(from, to, tokenId);
        _checkOnERC721Received(from, to, tokenId, data);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is
     * either the owner of the token, or approved to operate on all tokens held by this owner.
     *
     * Emits an {Approval} event.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address to, uint256 tokenId, address auth) internal {
        _approve(to, tokenId, auth, true);
    }

    /**
     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not
     * emitted in the context of transfers.
     */
    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {
        // Avoid reading the owner unless necessary
        if (emitEvent || auth != address(0)) {
            address owner = _requireOwned(tokenId);

            // We do not use _isAuthorized because single-token approvals should not be able to call approve
            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {
                revert ERC721InvalidApprover(auth);
            }

            if (emitEvent) {
                emit Approval(owner, to, tokenId);
            }
        }

        _tokenApprovals[tokenId] = to;
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Requirements:
     * - operator can't be the address zero.
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {
        if (operator == address(0)) {
            revert ERC721InvalidOperator(operator);
        }
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).
     * Returns the owner.
     *
     * Overrides to ownership logic should be done to {_ownerOf}.
     */
    function _requireOwned(uint256 tokenId) internal view returns (address) {
        address owner = _ownerOf(tokenId);
        if (owner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        }
        return owner;
    }

    /**
     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the
     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param data bytes optional data to send along with the call
     */
    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {
        if (to.code.length > 0) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
                if (retval != IERC721Receiver.onERC721Received.selector) {
                    revert ERC721InvalidReceiver(to);
                }
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert ERC721InvalidReceiver(to);
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/extensions/ERC721Burnable.sol)

pragma solidity ^0.8.20;

import {ERC721} from "../ERC721.sol";
import {Context} from "../../../utils/Context.sol";

/**
 * @title ERC721 Burnable Token
 * @dev ERC721 Token that can be burned (destroyed).
 */
abstract contract ERC721Burnable is Context, ERC721 {
    /**
     * @dev Burns `tokenId`. See {ERC721-_burn}.
     *
     * Requirements:
     *
     * - The caller must own `tokenId` or be an approved operator.
     */
    function burn(uint256 tokenId) public virtual {
        // Setting an "auth" arguments enables the `_isAuthorized` check which verifies that the token exists
        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.
        _update(address(0), tokenId, _msgSender());
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;

import {ERC721} from "solady/src/tokens/ERC721.sol";
import {
    CONDUIT, _APPROVAL_FOR_ALL_EVENT_SIGNATURE, SOLADY_ERC721_MASTER_SLOT_SEED_MASKED
} from "../../lib/Constants.sol";
import {IPreapprovalForAll} from "../../interfaces/IPreapprovalForAll.sol";

abstract contract ERC721ConduitPreapproved_Solady is ERC721, IPreapprovalForAll {
    constructor() {
        emit PreapprovalForAll(CONDUIT, true);
    }

    function transferFrom(address from, address to, uint256 id) public payable virtual override {
        _transfer(_by(from), from, to, id);
    }

    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        bool approved = super.isApprovedForAll(owner, operator);
        return (operator == CONDUIT) ? !approved : approved;
    }

    function setApprovalForAll(address operator, bool isApproved) public virtual override {
        /// @solidity memory-safe-assembly
        assembly {
            // Convert to 0 or 1.
            isApproved := iszero(iszero(isApproved))
            let isConduit := eq(operator, CONDUIT)
            // if isConduit, flip isApproved, otherwise leave as is
            let storedValue :=
                or(
                    // isConduit && !isApproved
                    and(isConduit, iszero(isApproved)),
                    // !isConduit && isApproved
                    and(iszero(isConduit), isApproved)
                )
            // Update the `isApproved` for (`msg.sender`, `operator`).
            mstore(0x1c, operator)
            mstore(0x08, SOLADY_ERC721_MASTER_SLOT_SEED_MASKED)
            mstore(0x00, caller())
            sstore(keccak256(0x0c, 0x30), storedValue)
            // Emit the {ApprovalForAll} event.
            mstore(0x00, isApproved)
            log3(0x00, 0x20, _APPROVAL_FOR_ALL_EVENT_SIGNATURE, caller(), shr(96, shl(96, operator)))
        }
    }

    function _by(address from) internal view virtual returns (address result) {
        if (msg.sender == CONDUIT) {
            if (isApprovedForAll(from, CONDUIT)) {
                return address(0);
            }
        }
        return msg.sender;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

import {ERC721ConduitPreapproved_Solady} from "shipyard-core/src/tokens/erc721/ERC721ConduitPreapproved_Solady.sol";
import {ERC721} from "solady/src/tokens/ERC721.sol";
import {ERC2981} from "solady/src/tokens/ERC2981.sol";
import {Ownable} from "solady/src/auth/Ownable.sol";
import {IShipyardContractMetadata} from "../interfaces/IShipyardContractMetadata.sol";

contract ERC721ShipyardContractMetadata is
    ERC721ConduitPreapproved_Solady,
    IShipyardContractMetadata,
    ERC2981,
    Ownable
{
    /// @dev The token name
    string internal _name;

    /// @dev The token symbol
    string internal _symbol;

    /// @dev The base URI.
    string public baseURI;

    /// @dev The contract URI.
    string public contractURI;

    /// @dev The provenance hash for guaranteeing metadata order for random reveals.
    bytes32 public provenanceHash;

    constructor(string memory name_, string memory symbol_) ERC721ConduitPreapproved_Solady() {
        // Set the token name and symbol.
        _name = name_;
        _symbol = symbol_;

        // Initialize the owner of the contract.
        _initializeOwner(msg.sender);
    }

    /**
     * @notice Returns the name of this token contract.
     */
    function name() public view override(ERC721, IShipyardContractMetadata) returns (string memory) {
        return _name;
    }

    /**
     * @notice Returns the symbol of this token contract.
     */
    function symbol() public view override(ERC721, IShipyardContractMetadata) returns (string memory) {
        return _symbol;
    }

    /**
     * @notice Sets the base URI for the token metadata and emits an event.
     *
     * @param newURI The new base URI to set.
     */
    function setBaseURI(string calldata newURI) external onlyOwner {
        baseURI = newURI;

        // Emit an event with the update.
        emit BatchMetadataUpdate(0, type(uint256).max);
    }

    /**
     * @notice Sets the contract URI for contract metadata.
     *
     * @param newURI The new contract URI.
     */
    function setContractURI(string calldata newURI) external onlyOwner {
        // Set the new contract URI.
        contractURI = newURI;

        // Emit an event with the update.
        emit ContractURIUpdated(newURI);
    }

    /**
     * @notice Sets the provenance hash and emits an event.
     *
     *         The provenance hash is used for random reveals, which
     *         is a hash of the ordered metadata to show it has not been
     *         modified after mint started.
     *
     *         This function will revert if the provenance hash has already
     *         been set, so be sure to carefully set it only once.
     *
     * @param newProvenanceHash The new provenance hash to set.
     */
    function setProvenanceHash(bytes32 newProvenanceHash) external onlyOwner {
        // Keep track of the old provenance hash for emitting with the event.
        bytes32 oldProvenanceHash = provenanceHash;

        // Revert if the provenance hash has already been set.
        if (oldProvenanceHash != bytes32(0)) {
            revert ProvenanceHashCannotBeSetAfterAlreadyBeingSet();
        }

        // Set the new provenance hash.
        provenanceHash = newProvenanceHash;

        // Emit an event with the update.
        emit ProvenanceHashUpdated(oldProvenanceHash, newProvenanceHash);
    }

    /**
     * @notice Returns the token URI for token metadata.
     *
     * @param tokenId The token id to get the token URI for.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory uri) {
        // Revert if the tokenId doesn't exist.
        if (!_exists(tokenId)) revert TokenDoesNotExist();

        // Put the baseURI on the stack.
        uri = baseURI;

        // Return empty if baseURI is empty.
        if (bytes(uri).length == 0) {
            return "";
        }

        // If the last character of the baseURI is not a slash, then return
        // the baseURI to signal the same metadata for all tokens, such as
        // for a prereveal state.
        if (bytes(uri)[bytes(uri).length - 1] != bytes("/")[0]) {
            return uri;
        }

        // Append the tokenId to the baseURI and return.
        uri = string.concat(uri, _toString(tokenId));
    }

    /**
     * @notice Sets the default royalty information.
     *
     * Requirements:
     *
     * - `receiver` cannot be the zero address.
     * - `feeNumerator` cannot be greater than the fee denominator of 10_000 basis points.
     */
    function setDefaultRoyalty(address receiver, uint96 feeNumerator) external onlyOwner {
        // Set the default royalty.
        // ERC2981 implementation ensures feeNumerator <= feeDenominator
        // and receiver != address(0).
        _setDefaultRoyalty(receiver, feeNumerator);

        // Emit an event with the updated params.
        emit RoyaltyInfoUpdated(receiver, feeNumerator);
    }

    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721, ERC2981) returns (bool) {
        return ERC721.supportsInterface(interfaceId) || ERC2981.supportsInterface(interfaceId);
    }

    /**
     * @dev Converts a uint256 to its ASCII string decimal representation.
     */
    function _toString(uint256 value) internal pure virtual returns (string memory str) {
        assembly {
            // The maximum value of a uint256 contains 78 digits (1 byte per digit), but
            // we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.
            // We will need 1 word for the trailing zeros padding, 1 word for the length,
            // and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.
            let m := add(mload(0x40), 0xa0)
            // Update the free memory pointer to allocate.
            mstore(0x40, m)
            // Assign the `str` to the end.
            str := sub(m, 0x20)
            // Zeroize the slot after the string.
            mstore(str, 0)

            // Cache the end of the memory to calculate the length later.
            let end := str

            // We write the string from rightmost digit to leftmost digit.
            // The following is essentially a do-while loop that also handles the zero case.
            // prettier-ignore
            for { let temp := value } 1 {} {
                str := sub(str, 1)
                // Write the character to the pointer.
                // The ASCII index of the '0' character is 48.
                mstore8(str, add(48, mod(temp, 10)))
                // Keep dividing `temp` until zero.
                temp := div(temp, 10)
                // prettier-ignore
                if iszero(temp) { break }
            }

            let length := sub(end, str)
            // Move the pointer 32 bytes leftwards to make room for the length.
            str := sub(str, 0x20)
            // Store the length.
            mstore(str, length)
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

import {ERC721ShipyardContractMetadata} from "./lib/ERC721ShipyardContractMetadata.sol";
import {ERC7498NFTRedeemables} from "./lib/ERC7498NFTRedeemables.sol";
import {DynamicTraits} from "shipyard-core/src/dynamic-traits/DynamicTraits.sol";
import {Campaign} from "./lib/RedeemablesStructs.sol";

contract ERC721ShipyardRedeemable is ERC721ShipyardContractMetadata, ERC7498NFTRedeemables {
    constructor(string memory name_, string memory symbol_) ERC721ShipyardContractMetadata(name_, symbol_) {}

    function createCampaign(Campaign calldata campaign, string calldata metadataURI)
        public
        override
        onlyOwner
        returns (uint256 campaignId)
    {
        campaignId = ERC7498NFTRedeemables.createCampaign(campaign, metadataURI);
    }

    function setTrait(uint256 tokenId, bytes32 traitKey, bytes32 value) public virtual override onlyOwner {
        if (!_exists(tokenId)) revert TokenDoesNotExist();

        DynamicTraits.setTrait(tokenId, traitKey, value);
    }

    function getTraitValue(uint256 tokenId, bytes32 traitKey)
        public
        view
        virtual
        override
        returns (bytes32 traitValue)
    {
        if (!_exists(tokenId)) revert TokenDoesNotExist();

        traitValue = DynamicTraits.getTraitValue(tokenId, traitKey);
    }

    function getTraitValues(uint256 tokenId, bytes32[] calldata traitKeys)
        public
        view
        virtual
        override
        returns (bytes32[] memory traitValues)
    {
        if (!_exists(tokenId)) revert TokenDoesNotExist();

        traitValues = DynamicTraits.getTraitValues(tokenId, traitKeys);
    }

    function burn(uint256 tokenId) public {
        _burn(msg.sender, tokenId);
    }

    function _useInternalBurn() internal pure virtual override returns (bool) {
        return true;
    }

    function _internalBurn(
        address,
        /* from */
        uint256 id,
        uint256 /* amount */
    ) internal virtual override {
        _burn(id);
    }

    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override(ERC721ShipyardContractMetadata, ERC7498NFTRedeemables)
        returns (bool)
    {
        return ERC721ShipyardContractMetadata.supportsInterface(interfaceId)
            || ERC7498NFTRedeemables.supportsInterface(interfaceId);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

import {IERC165} from "openzeppelin-contracts/contracts/interfaces/IERC165.sol";
import {ERC721ConduitPreapproved_Solady} from "shipyard-core/src/tokens/erc721/ERC721ConduitPreapproved_Solady.sol";
import {ConsiderationItem, OfferItem} from "seaport-types/src/lib/ConsiderationStructs.sol";
import {Ownable} from "solady/src/auth/Ownable.sol";
import {ERC7498NFTRedeemables} from "../lib/ERC7498NFTRedeemables.sol";
import {CampaignParams} from "../lib/RedeemablesStructs.sol";
import {IRedemptionMintable} from "../interfaces/IRedemptionMintable.sol";
import {ERC721ShipyardRedeemable} from "../ERC721ShipyardRedeemable.sol";
import {IRedemptionMintable} from "../interfaces/IRedemptionMintable.sol";
import {TraitRedemption} from "../lib/RedeemablesStructs.sol";

contract ERC721ShipyardRedeemableMintable is ERC721ShipyardRedeemable, IRedemptionMintable {
    /// @dev The ERC-7498 redeemables contracts.
    address[] internal _erc7498RedeemablesContracts;

    /// @dev The next token id to mint.
    uint256 _nextTokenId = 1;

    constructor(string memory name_, string memory symbol_) ERC721ShipyardRedeemable(name_, symbol_) {}

    function mintRedemption(
        uint256, /* campaignId */
        address recipient,
        OfferItem calldata, /* offer */
        ConsiderationItem[] calldata, /* consideration */
        TraitRedemption[] calldata /* traitRedemptions */
    ) external virtual {
        // Require that msg.sender is valid.
        _requireValidRedeemablesCaller();

        // Increment nextTokenId first so more of the same token id cannot be minted through reentrancy.
        ++_nextTokenId;

        _mint(recipient, _nextTokenId - 1);
    }

    function getRedeemablesContracts() external view returns (address[] memory) {
        return _erc7498RedeemablesContracts;
    }

    function setRedeemablesContracts(address[] calldata redeemablesContracts) external onlyOwner {
        _erc7498RedeemablesContracts = redeemablesContracts;
    }

    function _requireValidRedeemablesCaller() internal view {
        // Allow the contract to call itself.
        if (msg.sender == address(this)) return;

        bool validCaller;
        for (uint256 i; i < _erc7498RedeemablesContracts.length; i++) {
            if (msg.sender == _erc7498RedeemablesContracts[i]) {
                validCaller = true;
            }
        }
        if (!validCaller) revert InvalidCaller(msg.sender);
    }

    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override(ERC721ShipyardRedeemable)
        returns (bool)
    {
        return interfaceId == type(IRedemptionMintable).interfaceId
            || ERC721ShipyardRedeemable.supportsInterface(interfaceId);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

import {IERC20} from "openzeppelin-contracts/contracts/interfaces/IERC20.sol";
import {IERC165} from "openzeppelin-contracts/contracts/interfaces/IERC165.sol";
import {IERC721} from "openzeppelin-contracts/contracts/interfaces/IERC721.sol";
import {IERC1155} from "openzeppelin-contracts/contracts/interfaces/IERC1155.sol";
import {ERC20Burnable} from "openzeppelin-contracts/contracts/token/ERC20/extensions/ERC20Burnable.sol";
import {ERC721Burnable} from "openzeppelin-contracts/contracts/token/ERC721/extensions/ERC721Burnable.sol";
import {ERC1155Burnable} from "openzeppelin-contracts/contracts/token/ERC1155/extensions/ERC1155Burnable.sol";
import {OfferItem, ConsiderationItem, SpentItem} from "seaport-types/src/lib/ConsiderationStructs.sol";
import {ItemType} from "seaport-types/src/lib/ConsiderationEnums.sol";
import {DynamicTraits} from "shipyard-core/src/dynamic-traits/DynamicTraits.sol";
import {IERC7496} from "shipyard-core/src/dynamic-traits/interfaces/IERC7496.sol";
import {IERC7498} from "../interfaces/IERC7498.sol";
import {IRedemptionMintable} from "../interfaces/IRedemptionMintable.sol";
import {RedeemablesErrors} from "./RedeemablesErrors.sol";
import {Campaign, CampaignParams, CampaignRequirements, TraitRedemption} from "./RedeemablesStructs.sol";
import {BURN_ADDRESS} from "./RedeemablesConstants.sol";

contract ERC7498NFTRedeemables is IERC165, IERC7498, DynamicTraits, RedeemablesErrors {
    /// @dev Counter for next campaign id.
    uint256 private _nextCampaignId = 1;

    /// @dev The campaign by campaign id.
    mapping(uint256 campaignId => Campaign campaign) private _campaigns;

    /// @dev The campaign metadata URI.
    string private _campaignMetadataURI;

    /// @dev The total current redemptions by campaign id.
    mapping(uint256 campaignId => uint256 count) private _totalRedemptions;

    function redeem(uint256[] calldata considerationTokenIds, address recipient, bytes calldata extraData)
        public
        payable
    {
        // If the recipient is the null address, set to msg.sender.
        if (recipient == address(0)) {
            recipient = msg.sender;
        }

        // Get the values from extraData.
        (
            uint256 campaignId,
            uint256 requirementsIndex,
            /* bytes32 redemptionHash */
            ,
            uint256[] memory traitRedemptionTokenIds,
            /* uint256 salt */
            ,
            /*bytes memory signature */
        ) = abi.decode(extraData, (uint256, uint256, bytes32, uint256[], uint256, bytes));

        // Get the campaign.
        Campaign storage campaign = _campaigns[campaignId];

        // Validate the requirements index is valid.
        if (requirementsIndex >= campaign.requirements.length) {
            revert RequirementsIndexOutOfBounds();
        }

        // Validate the campaign time and total redemptions.
        _validateRedemption(campaignId, campaign);

        // Process the redemption.
        _processRedemption(
            campaignId,
            campaign.requirements[requirementsIndex],
            considerationTokenIds,
            traitRedemptionTokenIds,
            recipient
        );

        // Emit the Redemption event.
        emit Redemption(
            campaignId, requirementsIndex, bytes32(0), considerationTokenIds, traitRedemptionTokenIds, msg.sender
        );
    }

    function getCampaign(uint256 campaignId)
        public
        view
        override
        returns (Campaign memory campaign, string memory metadataURI, uint256 totalRedemptions)
    {
        // Revert if campaign id is invalid.
        if (campaignId == 0 || campaignId >= _nextCampaignId) {
            revert InvalidCampaignId();
        }

        // Get the campaign.
        campaign = _campaigns[campaignId];

        // Get the campaign metadata uri.
        metadataURI = _campaignMetadataURI;

        // Get the total redemptions.
        totalRedemptions = _totalRedemptions[campaignId];
    }

    /**
     * @notice Create a new redeemable campaign.
     * @dev    IMPORTANT: Override this method with access role restriction.
     * @param campaign The campaign.
     * @param metadataURI The campaign metadata uri.
     */
    function createCampaign(Campaign calldata campaign, string calldata metadataURI)
        public
        virtual
        returns (uint256 campaignId)
    {
        // Validate the campaign params, reverts if invalid.
        _validateCampaign(campaign);

        // Set the campaignId and increment the next one.
        campaignId = _nextCampaignId;
        ++_nextCampaignId;

        // Set the campaign params.
        _campaigns[campaignId] = campaign;

        // Set the campaign metadata uri if provided.
        if (bytes(metadataURI).length != 0) {
            _campaignMetadataURI = metadataURI;
        }

        emit CampaignUpdated(campaignId, campaign, _campaignMetadataURI);
    }

    function updateCampaign(uint256 campaignId, Campaign calldata campaign, string calldata metadataURI) external {
        // Revert if the campaign id is invalid.
        if (campaignId == 0 || campaignId >= _nextCampaignId) {
            revert InvalidCampaignId();
        }

        // Revert if msg.sender is not the manager.
        address existingManager = _campaigns[campaignId].params.manager;
        if (existingManager != msg.sender) {
            revert NotManager();
        }

        // Validate the campaign params and revert if invalid.
        _validateCampaign(campaign);

        // Set the campaign.
        _campaigns[campaignId] = campaign;

        // Update the campaign metadataURI if it was provided.
        if (bytes(metadataURI).length != 0) {
            _campaignMetadataURI = metadataURI;
        }

        emit CampaignUpdated(campaignId, campaign, _campaignMetadataURI);
    }

    function _validateCampaign(Campaign memory campaign) internal pure {
        // Revert if startTime is past endTime.
        if (campaign.params.startTime > campaign.params.endTime) {
            revert InvalidTime();
        }

        // Iterate over the requirements.
        for (uint256 i; i < campaign.requirements.length;) {
            CampaignRequirements memory requirement = campaign.requirements[i];

            // Validate each consideration item.
            for (uint256 j = 0; j < requirement.consideration.length;) {
                ConsiderationItem memory c = requirement.consideration[j];

                // Revert if any of the consideration item recipients is the zero address.
                // 0xdead address should be used instead.
                // For internal burn, override _internalBurn and set _useInternalBurn to true.
                if (c.recipient == address(0)) {
                    revert ConsiderationItemRecipientCannotBeZeroAddress();
                }

                if (c.startAmount == 0) {
                    revert ConsiderationItemAmountCannotBeZero();
                }

                // Revert if startAmount != endAmount, as this requires more complex logic.
                if (c.startAmount != c.endAmount) {
                    revert NonMatchingConsiderationItemAmounts(i, c.startAmount, c.endAmount);
                }
                unchecked {
                    ++j;
                }
            }
            unchecked {
                ++i;
            }
        }
    }

    function _validateRedemption(uint256 campaignId, Campaign storage campaign) internal view {
        if (_isInactive(campaign.params.startTime, campaign.params.endTime)) {
            revert NotActive_(block.timestamp, campaign.params.startTime, campaign.params.endTime);
        }

        // Revert if max total redemptions would be exceeded.
        if (_totalRedemptions[campaignId] + 1 > campaign.params.maxCampaignRedemptions) {
            revert MaxCampaignRedemptionsReached(
                _totalRedemptions[campaignId] + 1, campaign.params.maxCampaignRedemptions
            );
        }
    }

    function _transferConsiderationItem(uint256 id, ConsiderationItem memory c) internal {
        // WITH_CRITERIA with identifier 0 is wildcard: any id is valid.
        // Criteria is not yet implemented, for that functionality use the contract offerer.
        if (
            id != c.identifierOrCriteria && c.identifierOrCriteria != 0
                && (c.itemType != ItemType.ERC721_WITH_CRITERIA || c.itemType != ItemType.ERC1155_WITH_CRITERIA)
        ) {
            revert InvalidConsiderationTokenIdSupplied(c.token, id, c.identifierOrCriteria);
        }

        // If consideration item is this contract, recipient is burn address, and _useInternalBurn() fn returns true,
        // call the internal burn function and return.
        if (c.token == address(this) && c.recipient == payable(BURN_ADDRESS) && _useInternalBurn()) {
            _internalBurn(msg.sender, id, c.startAmount);
        } else {
            // Transfer the token to the consideration recipient.
            if (c.itemType == ItemType.ERC721 || c.itemType == ItemType.ERC721_WITH_CRITERIA) {
                // If recipient is the burn address, try burning the token first, if that doesn't work use transfer.
                if (c.recipient == payable(BURN_ADDRESS)) {
                    try ERC721Burnable(c.token).burn(id) {
                        // If the burn worked, return.
                        return;
                    } catch {
                        // If the burn failed, transfer the token.
                        IERC721(c.token).safeTransferFrom(msg.sender, c.recipient, id);
                    }
                } else {
                    IERC721(c.token).safeTransferFrom(msg.sender, c.recipient, id);
                }
            } else if ((c.itemType == ItemType.ERC1155 || c.itemType == ItemType.ERC1155_WITH_CRITERIA)) {
                if (c.recipient == payable(BURN_ADDRESS)) {
                    // If recipient is the burn address, try burning the token first, if that doesn't work use transfer.
                    try ERC1155Burnable(c.token).burn(msg.sender, id, c.startAmount) {
                        // If the burn worked, return.
                        return;
                    } catch {
                        // If the burn failed, transfer the token.
                        IERC1155(c.token).safeTransferFrom(msg.sender, c.recipient, id, c.startAmount, "");
                    }
                } else {
                    IERC1155(c.token).safeTransferFrom(msg.sender, c.recipient, id, c.startAmount, "");
                }
            } else if (c.itemType == ItemType.ERC20) {
                if (c.recipient == payable(BURN_ADDRESS)) {
                    // If recipient is the burn address, try burning the token first, if that doesn't work use transfer.
                    try ERC20Burnable(c.token).burnFrom(msg.sender, c.startAmount) {
                        // If the burn worked, return.
                        return;
                    } catch {
                        // If the burn failed, transfer the token.
                        IERC20(c.token).transferFrom(msg.sender, c.recipient, c.startAmount);
                    }
                } else {
                    IERC20(c.token).transferFrom(msg.sender, c.recipient, c.startAmount);
                }
            } else {
                // ItemType.NATIVE
                (bool success,) = c.recipient.call{value: msg.value}("");
                if (!success) revert EtherTransferFailed();
            }
        }
    }

    /// @dev Override this function to return true if `_internalBurn` is used.
    function _useInternalBurn() internal pure virtual returns (bool) {
        return false;
    }

    /// @dev Function that is called to burn amounts of a token internal to this inherited contract.
    ///      Override with token implementation calling internal burn.
    function _internalBurn(address from, uint256 id, uint256 amount) internal virtual {
        // Override with your token implementation calling internal burn.
    }

    function _isInactive(uint256 startTime, uint256 endTime) internal view returns (bool inactive) {
        // Using the same check for time boundary from Seaport.
        // startTime <= block.timestamp < endTime
        assembly {
            inactive := or(iszero(gt(endTime, timestamp())), gt(startTime, timestamp()))
        }
    }

    function _processRedemption(
        uint256 campaignId,
        CampaignRequirements memory requirements,
        uint256[] memory considerationTokenIds,
        uint256[] memory traitRedemptionTokenIds,
        address recipient
    ) internal {
        // Increment the campaign's total redemptions.
        ++_totalRedemptions[campaignId];

        if (requirements.traitRedemptions.length > 0) {
            // Process the trait redemptions.
            _processTraitRedemptions(requirements.traitRedemptions, traitRedemptionTokenIds);
        }

        if (requirements.consideration.length > 0) {
            // Process the consideration items.
            _processConsiderationItems(requirements.consideration, considerationTokenIds);
        }

        if (requirements.offer.length > 0) {
            // Process the offer items.
            _processOfferItems(
                campaignId, requirements.consideration, requirements.offer, requirements.traitRedemptions, recipient
            );
        }
    }

    function _processConsiderationItems(
        ConsiderationItem[] memory consideration,
        uint256[] memory considerationTokenIds
    ) internal {
        // Revert if the tokenIds length does not match the consideration length.
        if (consideration.length != considerationTokenIds.length) {
            revert ConsiderationTokenIdsDontMatchConsiderationLength(consideration.length, considerationTokenIds.length);
        }

        // Keep track of the total native value to validate.
        uint256 totalNativeValue;

        // Iterate over the consideration items.
        for (uint256 i; i < consideration.length;) {
            // Get the consideration item.
            ConsiderationItem memory c = consideration[i];

            // Get the identifier.
            uint256 id = considerationTokenIds[i];

            // Get the token balance.
            uint256 balance;
            if (c.itemType == ItemType.ERC721 || c.itemType == ItemType.ERC721_WITH_CRITERIA) {
                balance = IERC721(c.token).ownerOf(id) == msg.sender ? 1 : 0;
            } else if (c.itemType == ItemType.ERC1155 || c.itemType == ItemType.ERC1155_WITH_CRITERIA) {
                balance = IERC1155(c.token).balanceOf(msg.sender, id);
            } else if (c.itemType == ItemType.ERC20) {
                balance = IERC20(c.token).balanceOf(msg.sender);
            } else {
                // ItemType.NATIVE
                totalNativeValue += c.startAmount;
                // Total native value is validated after the loop.
            }

            // Ensure the balance is sufficient.
            if (c.itemType != ItemType.NATIVE && balance < c.startAmount) {
                revert ConsiderationItemInsufficientBalance(c.token, balance, c.startAmount);
            }

            // Transfer the consideration item.
            _transferConsiderationItem(id, c);

            unchecked {
                ++i;
            }
        }

        // Validate the correct native value is sent with the transaction.
        if (msg.value != totalNativeValue) {
            revert InvalidTxValue(msg.value, totalNativeValue);
        }
    }

    function _processTraitRedemptions(
        TraitRedemption[] memory traitRedemptions,
        uint256[] memory traitRedemptionTokenIds
    ) internal {
        if (traitRedemptions.length != traitRedemptionTokenIds.length) {
            revert TraitRedemptionTokenIdsDontMatchTraitRedemptionsLength(
                traitRedemptions.length, traitRedemptionTokenIds.length
            );
        }

        _setTraits(traitRedemptions, traitRedemptionTokenIds);
    }

    function _processOfferItems(
        uint256 campaignId,
        ConsiderationItem[] memory consideration,
        OfferItem[] memory offer,
        TraitRedemption[] memory traitRedemptions,
        address recipient
    ) internal {
        // Mint the new tokens.
        for (uint256 i; i < offer.length;) {
            OfferItem memory offerItem = offer[i];
            IRedemptionMintable(offerItem.token).mintRedemption(
                campaignId, recipient, offerItem, consideration, traitRedemptions
            );
            unchecked {
                ++i;
            }
        }
    }

    function _setTraits(TraitRedemption[] memory traitRedemptions, uint256[] memory traitRedemptionTokenIds) internal {
        // Iterate over the trait redemptions and set traits on the tokens.
        for (uint256 i; i < traitRedemptions.length;) {
            // Get the trait redemption identifier and place on the stack.
            uint256 identifier = traitRedemptionTokenIds[i];

            // Declare a new block to manage stack depth.
            {
                // Get the substandard and place on the stack.
                uint8 substandard = traitRedemptions[i].substandard;

                // Get the substandard value and place on the stack.
                bytes32 substandardValue = traitRedemptions[i].substandardValue;

                // Get the token and place on the stack.
                address token = traitRedemptions[i].token;

                // Get the trait key and place on the stack.
                bytes32 traitKey = traitRedemptions[i].traitKey;

                // Get the trait value and place on the stack.
                bytes32 traitValue = traitRedemptions[i].traitValue;

                // Get the current trait value and place on the stack.
                bytes32 currentTraitValue = IERC7496(token).getTraitValue(identifier, traitKey);

                // If substandard is 1, set trait to traitValue.
                if (substandard == 1) {
                    // Revert if the current trait value does not match the substandard value.
                    if (currentTraitValue != substandardValue) {
                        revert InvalidRequiredTraitValue(
                            token, identifier, traitKey, currentTraitValue, substandardValue
                        );
                    }

                    // Set the trait to the trait value.
                    IERC7496(token).setTrait(identifier, traitRedemptions[i].traitKey, traitValue);
                    // If substandard is 2, increment trait by traitValue.
                } else if (substandard == 2) {
                    // Revert if the current trait value is greater than the substandard value.
                    if (currentTraitValue > substandardValue) {
                        revert InvalidRequiredTraitValue(
                            token, identifier, traitKey, currentTraitValue, substandardValue
                        );
                    }

                    // Increment the trait by the trait value.
                    uint256 newTraitValue = uint256(currentTraitValue) + uint256(traitValue);

                    IERC7496(token).setTrait(identifier, traitRedemptions[i].traitKey, bytes32(newTraitValue));
                } else if (substandard == 3) {
                    // Revert if the current trait value is less than the substandard value.
                    if (currentTraitValue < substandardValue) {
                        revert InvalidRequiredTraitValue(
                            token, identifier, traitKey, currentTraitValue, substandardValue
                        );
                    }

                    uint256 newTraitValue = uint256(currentTraitValue) - uint256(traitValue);

                    // Decrement the trait by the trait value.
                    IERC7496(token).setTrait(identifier, traitRedemptions[i].traitKey, bytes32(newTraitValue));
                } else if (substandard == 4) {
                    // Revert if the current trait value is not equal to the trait value.
                    if (currentTraitValue != traitValue) {
                        revert InvalidRequiredTraitValue(
                            token, identifier, traitKey, currentTraitValue, substandardValue
                        );
                    }
                    // No-op: substandard 4 has no set trait action.
                }
            }

            unchecked {
                ++i;
            }
        }
    }

    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override(IERC165, DynamicTraits)
        returns (bool)
    {
        return interfaceId == type(IERC7498).interfaceId || interfaceId == type(IERC165).interfaceId
            || interfaceId == type(IERC7496).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position is the index of the value in the `values` array plus 1.
        // Position 0 is used to mean a value is not in the set.
        mapping(bytes32 value => uint256) _positions;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._positions[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We cache the value's position to prevent multiple reads from the same storage slot
        uint256 position = set._positions[value];

        if (position != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 valueIndex = position - 1;
            uint256 lastIndex = set._values.length - 1;

            if (valueIndex != lastIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the lastValue to the index where the value to delete is
                set._values[valueIndex] = lastValue;
                // Update the tracked position of the lastValue (that was just moved)
                set._positions[lastValue] = position;
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the tracked position for the deleted slot
            delete set._positions[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._positions[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC1155/IERC1155.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` amount of tokens of type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the value of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(
        address[] calldata accounts,
        uint256[] calldata ids
    ) external view returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers a `value` amount of tokens of type `id` from `from` to `to`.
     *
     * WARNING: This function can potentially allow a reentrancy attack when transferring tokens
     * to an untrusted contract, when invoking {onERC1155Received} on the receiver.
     * Ensure to follow the checks-effects-interactions pattern and consider employing
     * reentrancy guards when interacting with untrusted contracts.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `value` amount.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(address from, address to, uint256 id, uint256 value, bytes calldata data) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     *
     * WARNING: This function can potentially allow a reentrancy attack when transferring tokens
     * to an untrusted contract, when invoking {onERC1155BatchReceived} on the receiver.
     * Ensure to follow the checks-effects-interactions pattern and consider employing
     * reentrancy guards when interacting with untrusted contracts.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `values` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)

pragma solidity ^0.8.20;

import {IERC1155} from "../IERC1155.sol";

/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 */
interface IERC1155MetadataURI is IERC1155 {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\{id\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../../utils/introspection/IERC165.sol";

/**
 * @dev Interface that must be implemented by smart contracts in order to receive
 * ERC-1155 token transfers.
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2;

interface IERC165 {
    /// @notice Query if a contract implements an interface
    /// @param interfaceID The interface identifier, as specified in ERC-165
    /// @dev Interface identification is specified in ERC-165. This function
    /// uses less than 30,000 gas.
    /// @return `true` if the contract implements `interfaceID` and
    /// `interfaceID` is not 0xffffffff, `false` otherwise
    function supportsInterface(bytes4 interfaceID) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
     *   a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or
     *   {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
     *   a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the address zero.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.20;

import {IERC721} from "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.20;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be
     * reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

import {IERC165} from "forge-std/interfaces/IERC165.sol";

interface IERC7496 is IERC165 {
    /* Events */
    event TraitUpdated(bytes32 indexed traitKey, uint256 tokenId, bytes32 trait);
    event TraitUpdatedBulkRange(bytes32 indexed traitKey, uint256 fromTokenId, uint256 toTokenId, bytes32 traitValue);
    event TraitUpdatedBulkList(bytes32 indexed traitKey, uint256[] tokenIds, bytes32 traitValue);
    event TraitMetadataURIUpdated();

    /* Getters */
    function getTraitValue(uint256 tokenId, bytes32 traitKey) external view returns (bytes32 traitValue);
    function getTraitValues(uint256 tokenId, bytes32[] calldata traitKeys)
        external
        view
        returns (bytes32[] memory traitValues);
    function getTraitMetadataURI() external view returns (string memory uri);

    /* Setters */
    function setTrait(uint256 tokenId, bytes32 traitKey, bytes32 value) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

import {OfferItem, ConsiderationItem, SpentItem} from "seaport-types/src/lib/ConsiderationStructs.sol";
import {Campaign, TraitRedemption} from "../lib/RedeemablesStructs.sol";

interface IERC7498 {
    event CampaignUpdated(uint256 indexed campaignId, Campaign campaign, string metadataURI);
    event Redemption(
        uint256 indexed campaignId,
        uint256 requirementsIndex,
        bytes32 redemptionHash,
        uint256[] considerationTokenIds,
        uint256[] traitRedemptionTokenIds,
        address redeemedBy
    );

    function createCampaign(Campaign calldata campaign, string calldata metadataURI)
        external
        returns (uint256 campaignId);

    function updateCampaign(uint256 campaignId, Campaign calldata campaign, string calldata metadataURI) external;

    function getCampaign(uint256 campaignId)
        external
        view
        returns (Campaign memory campaign, string memory metadataURI, uint256 totalRedemptions);

    function redeem(uint256[] calldata considerationTokenIds, address recipient, bytes calldata extraData)
        external
        payable;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;

interface IPreapprovalForAll {
    /// @notice Emitted when a token contract preapproves (or revokes) all token transfers from a specific address, if
    ///         the preapproval is configurable. This allows offchain indexers to correctly reflect token approvals
    ///         which can later be revoked.
    event PreapprovalForAll(address indexed operator, bool indexed approved);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

import {ConsiderationItem, OfferItem} from "seaport-types/src/lib/ConsiderationStructs.sol";
import {TraitRedemption} from "../lib/RedeemablesStructs.sol";

interface IRedemptionMintable {
    function mintRedemption(
        uint256 campaignId,
        address recipient,
        OfferItem calldata offer,
        ConsiderationItem[] calldata consideration,
        TraitRedemption[] calldata traitRedemptions
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

interface IShipyardContractMetadata {
    /// @dev Emit an event for token metadata reveals/updates, according to EIP-4906.
    event BatchMetadataUpdate(uint256 _fromTokenId, uint256 _toTokenId);

    /// @dev Emit an event when the URI for the collection-level metadata is updated.
    event ContractURIUpdated(string uri);

    /// @dev Emit an event when the provenance hash is updated.
    event ProvenanceHashUpdated(bytes32 oldProvenanceHash, bytes32 newProvenanceHash);

    /// @dev Emit an event when the royalties info is updated.
    event RoyaltyInfoUpdated(address receiver, uint256 basisPoints);

    /// @dev Revert with an error when attempting to set the provenance hash after it has already been set.
    error ProvenanceHashCannotBeSetAfterAlreadyBeingSet();

    function name() external view returns (string memory);

    function symbol() external view returns (string memory);

    function baseURI() external view returns (string memory);

    function contractURI() external view returns (string memory);

    function provenanceHash() external view returns (bytes32);

    function setBaseURI(string calldata newURI) external;

    function setContractURI(string calldata newURI) external;

    function setProvenanceHash(bytes32 newProvenanceHash) external;

    function setDefaultRoyalty(address receiver, uint96 feeNumerator) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}