// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "./Errors.sol" as CastingErrors;
import { MAX_UINT128, MAX_UINT40 } from "../Common.sol";
import { uMAX_SD1x18 } from "../sd1x18/Constants.sol";
import { SD1x18 } from "../sd1x18/ValueType.sol";
import { uMAX_SD59x18 } from "../sd59x18/Constants.sol";
import { SD59x18 } from "../sd59x18/ValueType.sol";
import { uMAX_UD2x18 } from "../ud2x18/Constants.sol";
import { UD2x18 } from "../ud2x18/ValueType.sol";
import { UD60x18 } from "./ValueType.sol";

/// @notice Casts a UD60x18 number into SD1x18.
/// @dev Requirements:
/// - x must be less than or equal to `uMAX_SD1x18`.
function intoSD1x18(UD60x18 x) pure returns (SD1x18 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > uint256(int256(uMAX_SD1x18))) {
        revert CastingErrors.PRBMath_UD60x18_IntoSD1x18_Overflow(x);
    }
    result = SD1x18.wrap(int64(uint64(xUint)));
}

/// @notice Casts a UD60x18 number into UD2x18.
/// @dev Requirements:
/// - x must be less than or equal to `uMAX_UD2x18`.
function intoUD2x18(UD60x18 x) pure returns (UD2x18 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > uMAX_UD2x18) {
        revert CastingErrors.PRBMath_UD60x18_IntoUD2x18_Overflow(x);
    }
    result = UD2x18.wrap(uint64(xUint));
}

/// @notice Casts a UD60x18 number into SD59x18.
/// @dev Requirements:
/// - x must be less than or equal to `uMAX_SD59x18`.
function intoSD59x18(UD60x18 x) pure returns (SD59x18 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > uint256(uMAX_SD59x18)) {
        revert CastingErrors.PRBMath_UD60x18_IntoSD59x18_Overflow(x);
    }
    result = SD59x18.wrap(int256(xUint));
}

/// @notice Casts a UD60x18 number into uint128.
/// @dev This is basically an alias for {unwrap}.
function intoUint256(UD60x18 x) pure returns (uint256 result) {
    result = UD60x18.unwrap(x);
}

/// @notice Casts a UD60x18 number into uint128.
/// @dev Requirements:
/// - x must be less than or equal to `MAX_UINT128`.
function intoUint128(UD60x18 x) pure returns (uint128 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > MAX_UINT128) {
        revert CastingErrors.PRBMath_UD60x18_IntoUint128_Overflow(x);
    }
    result = uint128(xUint);
}

/// @notice Casts a UD60x18 number into uint40.
/// @dev Requirements:
/// - x must be less than or equal to `MAX_UINT40`.
function intoUint40(UD60x18 x) pure returns (uint40 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > MAX_UINT40) {
        revert CastingErrors.PRBMath_UD60x18_IntoUint40_Overflow(x);
    }
    result = uint40(xUint);
}

/// @notice Alias for {wrap}.
function ud(uint256 x) pure returns (UD60x18 result) {
    result = UD60x18.wrap(x);
}

/// @notice Alias for {wrap}.
function ud60x18(uint256 x) pure returns (UD60x18 result) {
    result = UD60x18.wrap(x);
}

/// @notice Unwraps a UD60x18 number into uint256.
function unwrap(UD60x18 x) pure returns (uint256 result) {
    result = UD60x18.unwrap(x);
}

/// @notice Wraps a uint256 number into the UD60x18 value type.
function wrap(uint256 x) pure returns (UD60x18 result) {
    result = UD60x18.wrap(x);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;

import { IClaimable } from "pt-v5-claimable-interface/interfaces/IClaimable.sol";
import { PrizePool } from "pt-v5-prize-pool/PrizePool.sol";

import { HookManager } from "./HookManager.sol";

/// @title  PoolTogether V5 Claimable Vault Extension
/// @author G9 Software Inc.
/// @notice Provides an interface for Claimer contracts to interact with a vault in PoolTogether
/// V5 while allowing each account to set and manage prize hooks that are called when they win.
abstract contract Claimable is HookManager, IClaimable {

    ////////////////////////////////////////////////////////////////////////////////
    // Public Constants and Variables
    ////////////////////////////////////////////////////////////////////////////////

    /// @notice The gas to give to each of the before and after prize claim hooks.
    /// @dev This should be enough gas to mint an NFT if needed.
    uint24 public constant HOOK_GAS = 150_000;

    /// @notice Address of the PrizePool that computes prizes.
    PrizePool public immutable prizePool;

    /// @notice Address of the claimer.
    address public claimer;

    ////////////////////////////////////////////////////////////////////////////////
    // Errors
    ////////////////////////////////////////////////////////////////////////////////

    /// @notice Thrown when the Prize Pool is set to the zero address.
    error PrizePoolZeroAddress();

    /// @notice Thrown when the Claimer is set to the zero address.
    error ClaimerZeroAddress();

    /// @notice Thrown when a prize is claimed for the zero address.
    error ClaimRecipientZeroAddress();

    /// @notice Thrown when the caller is not the prize claimer.
    /// @param caller The caller address
    /// @param claimer The claimer address
    error CallerNotClaimer(address caller, address claimer);

    ////////////////////////////////////////////////////////////////////////////////
    // Modifiers
    ////////////////////////////////////////////////////////////////////////////////

    /// @notice Requires the caller to be the claimer.
    modifier onlyClaimer() {
        if (msg.sender != claimer) revert CallerNotClaimer(msg.sender, claimer);
        _;
    }

    ////////////////////////////////////////////////////////////////////////////////
    // Constructor
    ////////////////////////////////////////////////////////////////////////////////

    /// @notice Claimable constructor
    /// @param prizePool_ The prize pool to claim prizes from
    /// @param claimer_ The address allowed to claim prizes on behalf of winners
    constructor(PrizePool prizePool_, address claimer_) {
        if (address(prizePool_) == address(0)) revert PrizePoolZeroAddress();
        prizePool = prizePool_;
        _setClaimer(claimer_);
    }

    ////////////////////////////////////////////////////////////////////////////////
    // IClaimable Implementation
    ////////////////////////////////////////////////////////////////////////////////

    /// @inheritdoc IClaimable
    /// @dev Also calls the before and after claim hooks if set by the winner.
    function claimPrize(
        address _winner,
        uint8 _tier,
        uint32 _prizeIndex,
        uint96 _reward,
        address _rewardRecipient
    ) external onlyClaimer returns (uint256) {
        address _prizeRecipient;
        bytes memory _hookData;

        if (_hooks[_winner].useBeforeClaimPrize) {
            (_prizeRecipient, _hookData) = _hooks[_winner].implementation.beforeClaimPrize{ gas: HOOK_GAS }(
                _winner,
                _tier,
                _prizeIndex,
                _reward,
                _rewardRecipient
            );
        } else {
            _prizeRecipient = _winner;
        }

        if (_prizeRecipient == address(0)) revert ClaimRecipientZeroAddress();

        uint256 _prizeTotal = prizePool.claimPrize(
            _winner,
            _tier,
            _prizeIndex,
            _prizeRecipient,
            _reward,
            _rewardRecipient
        );

        if (_hooks[_winner].useAfterClaimPrize) {
            _hooks[_winner].implementation.afterClaimPrize{ gas: HOOK_GAS }(
                _winner,
                _tier,
                _prizeIndex,
                _prizeTotal - _reward,
                _prizeRecipient,
                _hookData
            );
        }

        return _prizeTotal;
    }

    ////////////////////////////////////////////////////////////////////////////////
    // Internal Helpers
    ////////////////////////////////////////////////////////////////////////////////

    /// @notice Set claimer address.
    /// @dev Will revert if `_claimer` is address zero.
    /// @param _claimer Address of the claimer
    function _setClaimer(address _claimer) internal {
        if (_claimer == address(0)) revert ClaimerZeroAddress();
        claimer = _claimer;
        emit ClaimerSet(_claimer);
    }
    
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

// Common.sol
//
// Common mathematical functions used in both SD59x18 and UD60x18. Note that these global functions do not
// always operate with SD59x18 and UD60x18 numbers.

/*//////////////////////////////////////////////////////////////////////////
                                CUSTOM ERRORS
//////////////////////////////////////////////////////////////////////////*/

/// @notice Thrown when the resultant value in {mulDiv} overflows uint256.
error PRBMath_MulDiv_Overflow(uint256 x, uint256 y, uint256 denominator);

/// @notice Thrown when the resultant value in {mulDiv18} overflows uint256.
error PRBMath_MulDiv18_Overflow(uint256 x, uint256 y);

/// @notice Thrown when one of the inputs passed to {mulDivSigned} is `type(int256).min`.
error PRBMath_MulDivSigned_InputTooSmall();

/// @notice Thrown when the resultant value in {mulDivSigned} overflows int256.
error PRBMath_MulDivSigned_Overflow(int256 x, int256 y);

/*//////////////////////////////////////////////////////////////////////////
                                    CONSTANTS
//////////////////////////////////////////////////////////////////////////*/

/// @dev The maximum value a uint128 number can have.
uint128 constant MAX_UINT128 = type(uint128).max;

/// @dev The maximum value a uint40 number can have.
uint40 constant MAX_UINT40 = type(uint40).max;

/// @dev The unit number, which the decimal precision of the fixed-point types.
uint256 constant UNIT = 1e18;

/// @dev The unit number inverted mod 2^256.
uint256 constant UNIT_INVERSE = 78156646155174841979727994598816262306175212592076161876661_508869554232690281;

/// @dev The the largest power of two that divides the decimal value of `UNIT`. The logarithm of this value is the least significant
/// bit in the binary representation of `UNIT`.
uint256 constant UNIT_LPOTD = 262144;

/*//////////////////////////////////////////////////////////////////////////
                                    FUNCTIONS
//////////////////////////////////////////////////////////////////////////*/

/// @notice Calculates the binary exponent of x using the binary fraction method.
/// @dev Has to use 192.64-bit fixed-point numbers. See https://ethereum.stackexchange.com/a/96594/24693.
/// @param x The exponent as an unsigned 192.64-bit fixed-point number.
/// @return result The result as an unsigned 60.18-decimal fixed-point number.
/// @custom:smtchecker abstract-function-nondet
function exp2(uint256 x) pure returns (uint256 result) {
    unchecked {
        // Start from 0.5 in the 192.64-bit fixed-point format.
        result = 0x800000000000000000000000000000000000000000000000;

        // The following logic multiplies the result by $\sqrt{2^{-i}}$ when the bit at position i is 1. Key points:
        //
        // 1. Intermediate results will not overflow, as the starting point is 2^191 and all magic factors are under 2^65.
        // 2. The rationale for organizing the if statements into groups of 8 is gas savings. If the result of performing
        // a bitwise AND operation between x and any value in the array [0x80; 0x40; 0x20; 0x10; 0x08; 0x04; 0x02; 0x01] is 1,
        // we know that `x & 0xFF` is also 1.
        if (x & 0xFF00000000000000 > 0) {
            if (x & 0x8000000000000000 > 0) {
                result = (result * 0x16A09E667F3BCC909) >> 64;
            }
            if (x & 0x4000000000000000 > 0) {
                result = (result * 0x1306FE0A31B7152DF) >> 64;
            }
            if (x & 0x2000000000000000 > 0) {
                result = (result * 0x1172B83C7D517ADCE) >> 64;
            }
            if (x & 0x1000000000000000 > 0) {
                result = (result * 0x10B5586CF9890F62A) >> 64;
            }
            if (x & 0x800000000000000 > 0) {
                result = (result * 0x1059B0D31585743AE) >> 64;
            }
            if (x & 0x400000000000000 > 0) {
                result = (result * 0x102C9A3E778060EE7) >> 64;
            }
            if (x & 0x200000000000000 > 0) {
                result = (result * 0x10163DA9FB33356D8) >> 64;
            }
            if (x & 0x100000000000000 > 0) {
                result = (result * 0x100B1AFA5ABCBED61) >> 64;
            }
        }

        if (x & 0xFF000000000000 > 0) {
            if (x & 0x80000000000000 > 0) {
                result = (result * 0x10058C86DA1C09EA2) >> 64;
            }
            if (x & 0x40000000000000 > 0) {
                result = (result * 0x1002C605E2E8CEC50) >> 64;
            }
            if (x & 0x20000000000000 > 0) {
                result = (result * 0x100162F3904051FA1) >> 64;
            }
            if (x & 0x10000000000000 > 0) {
                result = (result * 0x1000B175EFFDC76BA) >> 64;
            }
            if (x & 0x8000000000000 > 0) {
                result = (result * 0x100058BA01FB9F96D) >> 64;
            }
            if (x & 0x4000000000000 > 0) {
                result = (result * 0x10002C5CC37DA9492) >> 64;
            }
            if (x & 0x2000000000000 > 0) {
                result = (result * 0x1000162E525EE0547) >> 64;
            }
            if (x & 0x1000000000000 > 0) {
                result = (result * 0x10000B17255775C04) >> 64;
            }
        }

        if (x & 0xFF0000000000 > 0) {
            if (x & 0x800000000000 > 0) {
                result = (result * 0x1000058B91B5BC9AE) >> 64;
            }
            if (x & 0x400000000000 > 0) {
                result = (result * 0x100002C5C89D5EC6D) >> 64;
            }
            if (x & 0x200000000000 > 0) {
                result = (result * 0x10000162E43F4F831) >> 64;
            }
            if (x & 0x100000000000 > 0) {
                result = (result * 0x100000B1721BCFC9A) >> 64;
            }
            if (x & 0x80000000000 > 0) {
                result = (result * 0x10000058B90CF1E6E) >> 64;
            }
            if (x & 0x40000000000 > 0) {
                result = (result * 0x1000002C5C863B73F) >> 64;
            }
            if (x & 0x20000000000 > 0) {
                result = (result * 0x100000162E430E5A2) >> 64;
            }
            if (x & 0x10000000000 > 0) {
                result = (result * 0x1000000B172183551) >> 64;
            }
        }

        if (x & 0xFF00000000 > 0) {
            if (x & 0x8000000000 > 0) {
                result = (result * 0x100000058B90C0B49) >> 64;
            }
            if (x & 0x4000000000 > 0) {
                result = (result * 0x10000002C5C8601CC) >> 64;
            }
            if (x & 0x2000000000 > 0) {
                result = (result * 0x1000000162E42FFF0) >> 64;
            }
            if (x & 0x1000000000 > 0) {
                result = (result * 0x10000000B17217FBB) >> 64;
            }
            if (x & 0x800000000 > 0) {
                result = (result * 0x1000000058B90BFCE) >> 64;
            }
            if (x & 0x400000000 > 0) {
                result = (result * 0x100000002C5C85FE3) >> 64;
            }
            if (x & 0x200000000 > 0) {
                result = (result * 0x10000000162E42FF1) >> 64;
            }
            if (x & 0x100000000 > 0) {
                result = (result * 0x100000000B17217F8) >> 64;
            }
        }

        if (x & 0xFF000000 > 0) {
            if (x & 0x80000000 > 0) {
                result = (result * 0x10000000058B90BFC) >> 64;
            }
            if (x & 0x40000000 > 0) {
                result = (result * 0x1000000002C5C85FE) >> 64;
            }
            if (x & 0x20000000 > 0) {
                result = (result * 0x100000000162E42FF) >> 64;
            }
            if (x & 0x10000000 > 0) {
                result = (result * 0x1000000000B17217F) >> 64;
            }
            if (x & 0x8000000 > 0) {
                result = (result * 0x100000000058B90C0) >> 64;
            }
            if (x & 0x4000000 > 0) {
                result = (result * 0x10000000002C5C860) >> 64;
            }
            if (x & 0x2000000 > 0) {
                result = (result * 0x1000000000162E430) >> 64;
            }
            if (x & 0x1000000 > 0) {
                result = (result * 0x10000000000B17218) >> 64;
            }
        }

        if (x & 0xFF0000 > 0) {
            if (x & 0x800000 > 0) {
                result = (result * 0x1000000000058B90C) >> 64;
            }
            if (x & 0x400000 > 0) {
                result = (result * 0x100000000002C5C86) >> 64;
            }
            if (x & 0x200000 > 0) {
                result = (result * 0x10000000000162E43) >> 64;
            }
            if (x & 0x100000 > 0) {
                result = (result * 0x100000000000B1721) >> 64;
            }
            if (x & 0x80000 > 0) {
                result = (result * 0x10000000000058B91) >> 64;
            }
            if (x & 0x40000 > 0) {
                result = (result * 0x1000000000002C5C8) >> 64;
            }
            if (x & 0x20000 > 0) {
                result = (result * 0x100000000000162E4) >> 64;
            }
            if (x & 0x10000 > 0) {
                result = (result * 0x1000000000000B172) >> 64;
            }
        }

        if (x & 0xFF00 > 0) {
            if (x & 0x8000 > 0) {
                result = (result * 0x100000000000058B9) >> 64;
            }
            if (x & 0x4000 > 0) {
                result = (result * 0x10000000000002C5D) >> 64;
            }
            if (x & 0x2000 > 0) {
                result = (result * 0x1000000000000162E) >> 64;
            }
            if (x & 0x1000 > 0) {
                result = (result * 0x10000000000000B17) >> 64;
            }
            if (x & 0x800 > 0) {
                result = (result * 0x1000000000000058C) >> 64;
            }
            if (x & 0x400 > 0) {
                result = (result * 0x100000000000002C6) >> 64;
            }
            if (x & 0x200 > 0) {
                result = (result * 0x10000000000000163) >> 64;
            }
            if (x & 0x100 > 0) {
                result = (result * 0x100000000000000B1) >> 64;
            }
        }

        if (x & 0xFF > 0) {
            if (x & 0x80 > 0) {
                result = (result * 0x10000000000000059) >> 64;
            }
            if (x & 0x40 > 0) {
                result = (result * 0x1000000000000002C) >> 64;
            }
            if (x & 0x20 > 0) {
                result = (result * 0x10000000000000016) >> 64;
            }
            if (x & 0x10 > 0) {
                result = (result * 0x1000000000000000B) >> 64;
            }
            if (x & 0x8 > 0) {
                result = (result * 0x10000000000000006) >> 64;
            }
            if (x & 0x4 > 0) {
                result = (result * 0x10000000000000003) >> 64;
            }
            if (x & 0x2 > 0) {
                result = (result * 0x10000000000000001) >> 64;
            }
            if (x & 0x1 > 0) {
                result = (result * 0x10000000000000001) >> 64;
            }
        }

        // In the code snippet below, two operations are executed simultaneously:
        //
        // 1. The result is multiplied by $(2^n + 1)$, where $2^n$ represents the integer part, and the additional 1
        // accounts for the initial guess of 0.5. This is achieved by subtracting from 191 instead of 192.
        // 2. The result is then converted to an unsigned 60.18-decimal fixed-point format.
        //
        // The underlying logic is based on the relationship $2^{191-ip} = 2^{ip} / 2^{191}$, where $ip$ denotes the,
        // integer part, $2^n$.
        result *= UNIT;
        result >>= (191 - (x >> 64));
    }
}

/// @notice Finds the zero-based index of the first 1 in the binary representation of x.
///
/// @dev See the note on "msb" in this Wikipedia article: https://en.wikipedia.org/wiki/Find_first_set
///
/// Each step in this implementation is equivalent to this high-level code:
///
/// ```solidity
/// if (x >= 2 ** 128) {
///     x >>= 128;
///     result += 128;
/// }
/// ```
///
/// Where 128 is replaced with each respective power of two factor. See the full high-level implementation here:
/// https://gist.github.com/PaulRBerg/f932f8693f2733e30c4d479e8e980948
///
/// The Yul instructions used below are:
///
/// - "gt" is "greater than"
/// - "or" is the OR bitwise operator
/// - "shl" is "shift left"
/// - "shr" is "shift right"
///
/// @param x The uint256 number for which to find the index of the most significant bit.
/// @return result The index of the most significant bit as a uint256.
/// @custom:smtchecker abstract-function-nondet
function msb(uint256 x) pure returns (uint256 result) {
    // 2^128
    assembly ("memory-safe") {
        let factor := shl(7, gt(x, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^64
    assembly ("memory-safe") {
        let factor := shl(6, gt(x, 0xFFFFFFFFFFFFFFFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^32
    assembly ("memory-safe") {
        let factor := shl(5, gt(x, 0xFFFFFFFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^16
    assembly ("memory-safe") {
        let factor := shl(4, gt(x, 0xFFFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^8
    assembly ("memory-safe") {
        let factor := shl(3, gt(x, 0xFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^4
    assembly ("memory-safe") {
        let factor := shl(2, gt(x, 0xF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^2
    assembly ("memory-safe") {
        let factor := shl(1, gt(x, 0x3))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^1
    // No need to shift x any more.
    assembly ("memory-safe") {
        let factor := gt(x, 0x1)
        result := or(result, factor)
    }
}

/// @notice Calculates x*y÷denominator with 512-bit precision.
///
/// @dev Credits to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv.
///
/// Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - The denominator must not be zero.
/// - The result must fit in uint256.
///
/// @param x The multiplicand as a uint256.
/// @param y The multiplier as a uint256.
/// @param denominator The divisor as a uint256.
/// @return result The result as a uint256.
/// @custom:smtchecker abstract-function-nondet
function mulDiv(uint256 x, uint256 y, uint256 denominator) pure returns (uint256 result) {
    // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
    // use the Chinese Remainder Theorem to reconstruct the 512-bit result. The result is stored in two 256
    // variables such that product = prod1 * 2^256 + prod0.
    uint256 prod0; // Least significant 256 bits of the product
    uint256 prod1; // Most significant 256 bits of the product
    assembly ("memory-safe") {
        let mm := mulmod(x, y, not(0))
        prod0 := mul(x, y)
        prod1 := sub(sub(mm, prod0), lt(mm, prod0))
    }

    // Handle non-overflow cases, 256 by 256 division.
    if (prod1 == 0) {
        unchecked {
            return prod0 / denominator;
        }
    }

    // Make sure the result is less than 2^256. Also prevents denominator == 0.
    if (prod1 >= denominator) {
        revert PRBMath_MulDiv_Overflow(x, y, denominator);
    }

    ////////////////////////////////////////////////////////////////////////////
    // 512 by 256 division
    ////////////////////////////////////////////////////////////////////////////

    // Make division exact by subtracting the remainder from [prod1 prod0].
    uint256 remainder;
    assembly ("memory-safe") {
        // Compute remainder using the mulmod Yul instruction.
        remainder := mulmod(x, y, denominator)

        // Subtract 256 bit number from 512-bit number.
        prod1 := sub(prod1, gt(remainder, prod0))
        prod0 := sub(prod0, remainder)
    }

    unchecked {
        // Calculate the largest power of two divisor of the denominator using the unary operator ~. This operation cannot overflow
        // because the denominator cannot be zero at this point in the function execution. The result is always >= 1.
        // For more detail, see https://cs.stackexchange.com/q/138556/92363.
        uint256 lpotdod = denominator & (~denominator + 1);
        uint256 flippedLpotdod;

        assembly ("memory-safe") {
            // Factor powers of two out of denominator.
            denominator := div(denominator, lpotdod)

            // Divide [prod1 prod0] by lpotdod.
            prod0 := div(prod0, lpotdod)

            // Get the flipped value `2^256 / lpotdod`. If the `lpotdod` is zero, the flipped value is one.
            // `sub(0, lpotdod)` produces the two's complement version of `lpotdod`, which is equivalent to flipping all the bits.
            // However, `div` interprets this value as an unsigned value: https://ethereum.stackexchange.com/q/147168/24693
            flippedLpotdod := add(div(sub(0, lpotdod), lpotdod), 1)
        }

        // Shift in bits from prod1 into prod0.
        prod0 |= prod1 * flippedLpotdod;

        // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
        // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
        // four bits. That is, denominator * inv = 1 mod 2^4.
        uint256 inverse = (3 * denominator) ^ 2;

        // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
        // in modular arithmetic, doubling the correct bits in each step.
        inverse *= 2 - denominator * inverse; // inverse mod 2^8
        inverse *= 2 - denominator * inverse; // inverse mod 2^16
        inverse *= 2 - denominator * inverse; // inverse mod 2^32
        inverse *= 2 - denominator * inverse; // inverse mod 2^64
        inverse *= 2 - denominator * inverse; // inverse mod 2^128
        inverse *= 2 - denominator * inverse; // inverse mod 2^256

        // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
        // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
        // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
        // is no longer required.
        result = prod0 * inverse;
    }
}

/// @notice Calculates x*y÷1e18 with 512-bit precision.
///
/// @dev A variant of {mulDiv} with constant folding, i.e. in which the denominator is hard coded to 1e18.
///
/// Notes:
/// - The body is purposely left uncommented; to understand how this works, see the documentation in {mulDiv}.
/// - The result is rounded toward zero.
/// - We take as an axiom that the result cannot be `MAX_UINT256` when x and y solve the following system of equations:
///
/// $$
/// \begin{cases}
///     x * y = MAX\_UINT256 * UNIT \\
///     (x * y) \% UNIT \geq \frac{UNIT}{2}
/// \end{cases}
/// $$
///
/// Requirements:
/// - Refer to the requirements in {mulDiv}.
/// - The result must fit in uint256.
///
/// @param x The multiplicand as an unsigned 60.18-decimal fixed-point number.
/// @param y The multiplier as an unsigned 60.18-decimal fixed-point number.
/// @return result The result as an unsigned 60.18-decimal fixed-point number.
/// @custom:smtchecker abstract-function-nondet
function mulDiv18(uint256 x, uint256 y) pure returns (uint256 result) {
    uint256 prod0;
    uint256 prod1;
    assembly ("memory-safe") {
        let mm := mulmod(x, y, not(0))
        prod0 := mul(x, y)
        prod1 := sub(sub(mm, prod0), lt(mm, prod0))
    }

    if (prod1 == 0) {
        unchecked {
            return prod0 / UNIT;
        }
    }

    if (prod1 >= UNIT) {
        revert PRBMath_MulDiv18_Overflow(x, y);
    }

    uint256 remainder;
    assembly ("memory-safe") {
        remainder := mulmod(x, y, UNIT)
        result :=
            mul(
                or(
                    div(sub(prod0, remainder), UNIT_LPOTD),
                    mul(sub(prod1, gt(remainder, prod0)), add(div(sub(0, UNIT_LPOTD), UNIT_LPOTD), 1))
                ),
                UNIT_INVERSE
            )
    }
}

/// @notice Calculates x*y÷denominator with 512-bit precision.
///
/// @dev This is an extension of {mulDiv} for signed numbers, which works by computing the signs and the absolute values separately.
///
/// Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - Refer to the requirements in {mulDiv}.
/// - None of the inputs can be `type(int256).min`.
/// - The result must fit in int256.
///
/// @param x The multiplicand as an int256.
/// @param y The multiplier as an int256.
/// @param denominator The divisor as an int256.
/// @return result The result as an int256.
/// @custom:smtchecker abstract-function-nondet
function mulDivSigned(int256 x, int256 y, int256 denominator) pure returns (int256 result) {
    if (x == type(int256).min || y == type(int256).min || denominator == type(int256).min) {
        revert PRBMath_MulDivSigned_InputTooSmall();
    }

    // Get hold of the absolute values of x, y and the denominator.
    uint256 xAbs;
    uint256 yAbs;
    uint256 dAbs;
    unchecked {
        xAbs = x < 0 ? uint256(-x) : uint256(x);
        yAbs = y < 0 ? uint256(-y) : uint256(y);
        dAbs = denominator < 0 ? uint256(-denominator) : uint256(denominator);
    }

    // Compute the absolute value of x*y÷denominator. The result must fit in int256.
    uint256 resultAbs = mulDiv(xAbs, yAbs, dAbs);
    if (resultAbs > uint256(type(int256).max)) {
        revert PRBMath_MulDivSigned_Overflow(x, y);
    }

    // Get the signs of x, y and the denominator.
    uint256 sx;
    uint256 sy;
    uint256 sd;
    assembly ("memory-safe") {
        // "sgt" is the "signed greater than" assembly instruction and "sub(0,1)" is -1 in two's complement.
        sx := sgt(x, sub(0, 1))
        sy := sgt(y, sub(0, 1))
        sd := sgt(denominator, sub(0, 1))
    }

    // XOR over sx, sy and sd. What this does is to check whether there are 1 or 3 negative signs in the inputs.
    // If there are, the result should be negative. Otherwise, it should be positive.
    unchecked {
        result = sx ^ sy ^ sd == 0 ? -int256(resultAbs) : int256(resultAbs);
    }
}

/// @notice Calculates the square root of x using the Babylonian method.
///
/// @dev See https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method.
///
/// Notes:
/// - If x is not a perfect square, the result is rounded down.
/// - Credits to OpenZeppelin for the explanations in comments below.
///
/// @param x The uint256 number for which to calculate the square root.
/// @return result The result as a uint256.
/// @custom:smtchecker abstract-function-nondet
function sqrt(uint256 x) pure returns (uint256 result) {
    if (x == 0) {
        return 0;
    }

    // For our first guess, we calculate the biggest power of 2 which is smaller than the square root of x.
    //
    // We know that the "msb" (most significant bit) of x is a power of 2 such that we have:
    //
    // $$
    // msb(x) <= x <= 2*msb(x)$
    // $$
    //
    // We write $msb(x)$ as $2^k$, and we get:
    //
    // $$
    // k = log_2(x)
    // $$
    //
    // Thus, we can write the initial inequality as:
    //
    // $$
    // 2^{log_2(x)} <= x <= 2*2^{log_2(x)+1} \\
    // sqrt(2^k) <= sqrt(x) < sqrt(2^{k+1}) \\
    // 2^{k/2} <= sqrt(x) < 2^{(k+1)/2} <= 2^{(k/2)+1}
    // $$
    //
    // Consequently, $2^{log_2(x) /2} is a good first approximation of sqrt(x) with at least one correct bit.
    uint256 xAux = uint256(x);
    result = 1;
    if (xAux >= 2 ** 128) {
        xAux >>= 128;
        result <<= 64;
    }
    if (xAux >= 2 ** 64) {
        xAux >>= 64;
        result <<= 32;
    }
    if (xAux >= 2 ** 32) {
        xAux >>= 32;
        result <<= 16;
    }
    if (xAux >= 2 ** 16) {
        xAux >>= 16;
        result <<= 8;
    }
    if (xAux >= 2 ** 8) {
        xAux >>= 8;
        result <<= 4;
    }
    if (xAux >= 2 ** 4) {
        xAux >>= 4;
        result <<= 2;
    }
    if (xAux >= 2 ** 2) {
        result <<= 1;
    }

    // At this point, `result` is an estimation with at least one bit of precision. We know the true value has at
    // most 128 bits, since it is the square root of a uint256. Newton's method converges quadratically (precision
    // doubles at every iteration). We thus need at most 7 iteration to turn our partial result with one bit of
    // precision into the expected uint128 result.
    unchecked {
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;

        // If x is not a perfect square, round the result toward zero.
        uint256 roundedResult = x / result;
        if (result >= roundedResult) {
            result = roundedResult;
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { SD1x18 } from "./ValueType.sol";

/// @dev Euler's number as an SD1x18 number.
SD1x18 constant E = SD1x18.wrap(2_718281828459045235);

/// @dev The maximum value an SD1x18 number can have.
int64 constant uMAX_SD1x18 = 9_223372036854775807;
SD1x18 constant MAX_SD1x18 = SD1x18.wrap(uMAX_SD1x18);

/// @dev The maximum value an SD1x18 number can have.
int64 constant uMIN_SD1x18 = -9_223372036854775808;
SD1x18 constant MIN_SD1x18 = SD1x18.wrap(uMIN_SD1x18);

/// @dev PI as an SD1x18 number.
SD1x18 constant PI = SD1x18.wrap(3_141592653589793238);

/// @dev The unit number, which gives the decimal precision of SD1x18.
SD1x18 constant UNIT = SD1x18.wrap(1e18);
int256 constant uUNIT = 1e18;

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { uMAX_SD59x18, uMIN_SD59x18, uUNIT } from "./Constants.sol";
import { PRBMath_SD59x18_Convert_Overflow, PRBMath_SD59x18_Convert_Underflow } from "./Errors.sol";
import { SD59x18 } from "./ValueType.sol";

/// @notice Converts a simple integer to SD59x18 by multiplying it by `UNIT`.
///
/// @dev Requirements:
/// - x must be greater than or equal to `MIN_SD59x18 / UNIT`.
/// - x must be less than or equal to `MAX_SD59x18 / UNIT`.
///
/// @param x The basic integer to convert.
/// @param result The same number converted to SD59x18.
function convert(int256 x) pure returns (SD59x18 result) {
    if (x < uMIN_SD59x18 / uUNIT) {
        revert PRBMath_SD59x18_Convert_Underflow(x);
    }
    if (x > uMAX_SD59x18 / uUNIT) {
        revert PRBMath_SD59x18_Convert_Overflow(x);
    }
    unchecked {
        result = SD59x18.wrap(x * uUNIT);
    }
}

/// @notice Converts an SD59x18 number to a simple integer by dividing it by `UNIT`.
/// @dev The result is rounded toward zero.
/// @param x The SD59x18 number to convert.
/// @return result The same number as a simple integer.
function convert(SD59x18 x) pure returns (int256 result) {
    result = SD59x18.unwrap(x) / uUNIT;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)

pragma solidity ^0.8.0;

/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 */
library Counters {
    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        unchecked {
            counter._value += 1;
        }
    }

    function decrement(Counter storage counter) internal {
        uint256 value = counter._value;
        require(value > 0, "Counter: decrement overflow");
        unchecked {
            counter._value = value - 1;
        }
    }

    function reset(Counter storage counter) internal {
        counter._value = 0;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.24;

import { SafeCast } from "openzeppelin/utils/math/SafeCast.sol";
import { RingBufferLib } from "ring-buffer-lib/RingBufferLib.sol";

// The maximum number of observations that can be recorded.
uint16 constant MAX_OBSERVATION_CARDINALITY = 366;

/// @notice Thrown when adding balance for draw zero.
error AddToDrawZero();

/// @notice Thrown when an action can't be done on a closed draw.
/// @param drawId The ID of the closed draw
/// @param newestDrawId The newest draw ID
error DrawAwarded(uint24 drawId, uint24 newestDrawId);

/// @notice Thrown when a draw range is not strictly increasing.
/// @param startDrawId The start draw ID of the range
/// @param endDrawId The end draw ID of the range
error InvalidDrawRange(uint24 startDrawId, uint24 endDrawId);

/// @notice The accumulator observation record
/// @param available The total amount available as of this Observation
/// @param disbursed The total amount disbursed in the past
struct Observation {
  uint96 available;
  uint160 disbursed;
}

/// @notice The metadata for using the ring buffer.
struct RingBufferInfo {
  uint16 nextIndex;
  uint16 cardinality;
}

/// @title Draw Accumulator Lib
/// @author G9 Software Inc.
/// @notice This contract distributes tokens over time according to an exponential weighted average.
/// Time is divided into discrete "draws", of which each is allocated tokens.
library DrawAccumulatorLib {

  /// @notice An accumulator for a draw.
  /// @param ringBufferInfo The metadata for the drawRingBuffer
  /// @param drawRingBuffer The ring buffer of draw ids
  /// @param observations The observations for each draw id
  struct Accumulator {
    RingBufferInfo ringBufferInfo; // 32 bits
    uint24[366] drawRingBuffer; // 8784 bits
    // 8784 + 32 = 8816 bits in total
    // 256 * 35 = 8960
    // 8960 - 8816 = 144 bits left over
    mapping(uint256 drawId => Observation observation) observations;
  }

  /// @notice Adds balance for the given draw id to the accumulator.
  /// @param accumulator The accumulator to add to
  /// @param _amount The amount of balance to add
  /// @param _drawId The draw id to which to add balance to. This must be greater than or equal to the previous
  /// addition's draw id.
  /// @return True if a new observation was created, false otherwise.
  function add(
    Accumulator storage accumulator,
    uint256 _amount,
    uint24 _drawId
  ) internal returns (bool) {
    if (_drawId == 0) {
      revert AddToDrawZero();
    }
    RingBufferInfo memory ringBufferInfo = accumulator.ringBufferInfo;

    uint24 newestDrawId_ = accumulator.drawRingBuffer[
      RingBufferLib.newestIndex(ringBufferInfo.nextIndex, MAX_OBSERVATION_CARDINALITY)
    ];

    if (_drawId < newestDrawId_) {
      revert DrawAwarded(_drawId, newestDrawId_);
    }

    mapping(uint256 drawId => Observation observation) storage accumulatorObservations = accumulator
      .observations;
    Observation memory newestObservation_ = accumulatorObservations[newestDrawId_];
    if (_drawId != newestDrawId_) {
      uint16 cardinality = ringBufferInfo.cardinality;
      if (ringBufferInfo.cardinality < MAX_OBSERVATION_CARDINALITY) {
        cardinality += 1;
      } else {
        // Delete the old observation to save gas (older than 1 year)
        delete accumulatorObservations[accumulator.drawRingBuffer[ringBufferInfo.nextIndex]];
      }

      accumulator.drawRingBuffer[ringBufferInfo.nextIndex] = _drawId;
      accumulatorObservations[_drawId] = Observation({
        available: SafeCast.toUint96(_amount),
        disbursed: SafeCast.toUint160(
          newestObservation_.disbursed +
            newestObservation_.available
        )
      });

      accumulator.ringBufferInfo = RingBufferInfo({
        nextIndex: uint16(RingBufferLib.nextIndex(ringBufferInfo.nextIndex, MAX_OBSERVATION_CARDINALITY)),
        cardinality: cardinality
      });

      return true;
    } else {
      accumulatorObservations[newestDrawId_] = Observation({
        available: SafeCast.toUint96(newestObservation_.available + _amount),
        disbursed: newestObservation_.disbursed
      });

      return false;
    }
  }

  /// @notice Returns the newest draw id from the accumulator.
  /// @param accumulator The accumulator to get the newest draw id from
  /// @return The newest draw id
  function newestDrawId(Accumulator storage accumulator) internal view returns (uint256) {
    return
      accumulator.drawRingBuffer[
        RingBufferLib.newestIndex(accumulator.ringBufferInfo.nextIndex, MAX_OBSERVATION_CARDINALITY)
      ];
  }

  /// @notice Returns the newest draw id from the accumulator.
  /// @param accumulator The accumulator to get the newest draw id from
  /// @return The newest draw id
  function newestObservation(Accumulator storage accumulator) internal view returns (Observation memory) {
    return accumulator.observations[
      newestDrawId(accumulator)
    ];
  }

  /// @notice Gets the balance that was disbursed between the given start and end draw ids, inclusive.
  /// @param _accumulator The accumulator to get the disbursed balance from
  /// @param _startDrawId The start draw id, inclusive
  /// @param _endDrawId The end draw id, inclusive
  /// @return The disbursed balance between the given start and end draw ids, inclusive
  function getDisbursedBetween(
    Accumulator storage _accumulator,
    uint24 _startDrawId,
    uint24 _endDrawId
  ) internal view returns (uint256) {
    if (_startDrawId > _endDrawId) {
      revert InvalidDrawRange(_startDrawId, _endDrawId);
    }

    RingBufferInfo memory ringBufferInfo = _accumulator.ringBufferInfo;

    if (ringBufferInfo.cardinality == 0) {
      return 0;
    }

    uint16 oldestIndex = uint16(
      RingBufferLib.oldestIndex(
        ringBufferInfo.nextIndex,
        ringBufferInfo.cardinality,
        MAX_OBSERVATION_CARDINALITY
      )
    );
    uint16 newestIndex = uint16(
      RingBufferLib.newestIndex(ringBufferInfo.nextIndex, ringBufferInfo.cardinality)
    );

    uint24 oldestDrawId = _accumulator.drawRingBuffer[oldestIndex];
    uint24 _newestDrawId = _accumulator.drawRingBuffer[newestIndex];

    if (_endDrawId < oldestDrawId || _startDrawId > _newestDrawId) {
      // if out of range, return 0
      return 0;
    }

    Observation memory atOrAfterStart;
    if (_startDrawId <= oldestDrawId || ringBufferInfo.cardinality == 1) {
      atOrAfterStart = _accumulator.observations[oldestDrawId];
    } else {
      // check if the start draw has an observation, otherwise search for the earliest observation after
      atOrAfterStart = _accumulator.observations[_startDrawId];
      if (atOrAfterStart.available == 0 && atOrAfterStart.disbursed == 0) {
        (, , , uint24 afterOrAtDrawId) = binarySearch(
          _accumulator.drawRingBuffer,
          oldestIndex,
          newestIndex,
          ringBufferInfo.cardinality,
          _startDrawId
        );
        atOrAfterStart = _accumulator.observations[afterOrAtDrawId];
      }
    }

    Observation memory atOrBeforeEnd;
    if (_endDrawId >= _newestDrawId || ringBufferInfo.cardinality == 1) {
      atOrBeforeEnd = _accumulator.observations[_newestDrawId];
    } else {
      // check if the end draw has an observation, otherwise search for the latest observation before
      atOrBeforeEnd = _accumulator.observations[_endDrawId];
      if (atOrBeforeEnd.available == 0 && atOrBeforeEnd.disbursed == 0) {
        (, uint24 beforeOrAtDrawId, , ) = binarySearch(
          _accumulator.drawRingBuffer,
          oldestIndex,
          newestIndex,
          ringBufferInfo.cardinality,
          _endDrawId
        );
        atOrBeforeEnd = _accumulator.observations[beforeOrAtDrawId];
      }
    }

    return atOrBeforeEnd.available + atOrBeforeEnd.disbursed - atOrAfterStart.disbursed;
  }

  /// @notice Binary searches an array of draw ids for the given target draw id.
  /// @dev The _targetDrawId MUST exist between the range of draws at _oldestIndex and _newestIndex (inclusive)
  /// @param _drawRingBuffer The array of draw ids to search
  /// @param _oldestIndex The oldest index in the ring buffer
  /// @param _newestIndex The newest index in the ring buffer
  /// @param _cardinality The number of items in the ring buffer
  /// @param _targetDrawId The target draw id to search for
  /// @return beforeOrAtIndex The index of the observation occurring at or before the target draw id
  /// @return beforeOrAtDrawId The draw id of the observation occurring at or before the target draw id
  /// @return afterOrAtIndex The index of the observation occurring at or after the target draw id
  /// @return afterOrAtDrawId The draw id of the observation occurring at or after the target draw id
  function binarySearch(
    uint24[366] storage _drawRingBuffer,
    uint16 _oldestIndex,
    uint16 _newestIndex,
    uint16 _cardinality,
    uint24 _targetDrawId
  )
    internal
    view
    returns (
      uint16 beforeOrAtIndex,
      uint24 beforeOrAtDrawId,
      uint16 afterOrAtIndex,
      uint24 afterOrAtDrawId
    )
  {
    uint16 leftSide = _oldestIndex;
    uint16 rightSide = _newestIndex < leftSide ? leftSide + _cardinality - 1 : _newestIndex;
    uint16 currentIndex;

    while (true) {
      // We start our search in the middle of the `leftSide` and `rightSide`.
      // After each iteration, we narrow down the search to the left or the right side while still starting our search in the middle.
      currentIndex = (leftSide + rightSide) / 2;

      beforeOrAtIndex = uint16(RingBufferLib.wrap(currentIndex, _cardinality));
      beforeOrAtDrawId = _drawRingBuffer[beforeOrAtIndex];

      afterOrAtIndex = uint16(RingBufferLib.nextIndex(currentIndex, _cardinality));
      afterOrAtDrawId = _drawRingBuffer[afterOrAtIndex];

      bool targetAtOrAfter = beforeOrAtDrawId <= _targetDrawId;

      // Check if we've found the corresponding Observation.
      if (targetAtOrAfter && _targetDrawId <= afterOrAtDrawId) {
        break;
      }

      // If `beforeOrAtTimestamp` is greater than `_target`, then we keep searching lower. To the left of the current index.
      if (!targetAtOrAfter) {
        rightSide = currentIndex - 1;
      } else {
        // Otherwise, we keep searching higher. To the left of the current index.
        leftSide = currentIndex + 1;
      }
    }
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32")
            mstore(0x1c, hash)
            message := keccak256(0x00, 0x3c)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\x19\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            data := keccak256(ptr, 0x42)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Data with intended validator, created from a
     * `validator` and `data` according to the version 0 of EIP-191.
     *
     * See {recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x00", validator, data));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.8;

import "./ECDSA.sol";
import "../ShortStrings.sol";
import "../../interfaces/IERC5267.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the `_domainSeparatorV4` function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * _Available since v3.4._
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable state-variable-assignment
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;

    bytes32 private constant _TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;

    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;

    ShortString private immutable _name;
    ShortString private immutable _version;
    string private _nameFallback;
    string private _versionFallback;

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));

        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(_TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {EIP-5267}.
     *
     * _Available since v4.9._
     */
    function eip712Domain()
        public
        view
        virtual
        override
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _name.toStringWithFallback(_nameFallback),
            _version.toStringWithFallback(_versionFallback),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.0;

import "./IERC20Permit.sol";
import "../ERC20.sol";
import "../../../utils/cryptography/ECDSA.sol";
import "../../../utils/cryptography/EIP712.sol";
import "../../../utils/Counters.sol";

/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * _Available since v3.4._
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {
    using Counters for Counters.Counter;

    mapping(address => Counters.Counter) private _nonces;

    // solhint-disable-next-line var-name-mixedcase
    bytes32 private constant _PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    /**
     * @dev In previous versions `_PERMIT_TYPEHASH` was declared as `immutable`.
     * However, to ensure consistency with the upgradeable transpiler, we will continue
     * to reserve a slot.
     * @custom:oz-renamed-from _PERMIT_TYPEHASH
     */
    // solhint-disable-next-line var-name-mixedcase
    bytes32 private _PERMIT_TYPEHASH_DEPRECATED_SLOT;

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}

    /**
     * @inheritdoc IERC20Permit
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual override {
        require(block.timestamp <= deadline, "ERC20Permit: expired deadline");

        bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        require(signer == owner, "ERC20Permit: invalid signature");

        _approve(owner, spender, value);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    function nonces(address owner) public view virtual override returns (uint256) {
        return _nonces[owner].current();
    }

    /**
     * @inheritdoc IERC20Permit
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view override returns (bytes32) {
        return _domainSeparatorV4();
    }

    /**
     * @dev "Consume a nonce": return the current value and increment.
     *
     * _Available since v4.1._
     */
    function _useNonce(address owner) internal virtual returns (uint256 current) {
        Counters.Counter storage nonce = _nonces[owner];
        current = nonce.current();
        nonce.increment();
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { SD1x18 } from "./ValueType.sol";

/// @notice Thrown when trying to cast a SD1x18 number that doesn't fit in UD2x18.
error PRBMath_SD1x18_ToUD2x18_Underflow(SD1x18 x);

/// @notice Thrown when trying to cast a SD1x18 number that doesn't fit in UD60x18.
error PRBMath_SD1x18_ToUD60x18_Underflow(SD1x18 x);

/// @notice Thrown when trying to cast a SD1x18 number that doesn't fit in uint128.
error PRBMath_SD1x18_ToUint128_Underflow(SD1x18 x);

/// @notice Thrown when trying to cast a SD1x18 number that doesn't fit in uint256.
error PRBMath_SD1x18_ToUint256_Underflow(SD1x18 x);

/// @notice Thrown when trying to cast a SD1x18 number that doesn't fit in uint40.
error PRBMath_SD1x18_ToUint40_Overflow(SD1x18 x);

/// @notice Thrown when trying to cast a SD1x18 number that doesn't fit in uint40.
error PRBMath_SD1x18_ToUint40_Underflow(SD1x18 x);

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { wrap } from "./Casting.sol";
import { UD60x18 } from "./ValueType.sol";

/// @notice Implements the checked addition operation (+) in the UD60x18 type.
function add(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() + y.unwrap());
}

/// @notice Implements the AND (&) bitwise operation in the UD60x18 type.
function and(UD60x18 x, uint256 bits) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() & bits);
}

/// @notice Implements the AND (&) bitwise operation in the UD60x18 type.
function and2(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() & y.unwrap());
}

/// @notice Implements the equal operation (==) in the UD60x18 type.
function eq(UD60x18 x, UD60x18 y) pure returns (bool result) {
    result = x.unwrap() == y.unwrap();
}

/// @notice Implements the greater than operation (>) in the UD60x18 type.
function gt(UD60x18 x, UD60x18 y) pure returns (bool result) {
    result = x.unwrap() > y.unwrap();
}

/// @notice Implements the greater than or equal to operation (>=) in the UD60x18 type.
function gte(UD60x18 x, UD60x18 y) pure returns (bool result) {
    result = x.unwrap() >= y.unwrap();
}

/// @notice Implements a zero comparison check function in the UD60x18 type.
function isZero(UD60x18 x) pure returns (bool result) {
    // This wouldn't work if x could be negative.
    result = x.unwrap() == 0;
}

/// @notice Implements the left shift operation (<<) in the UD60x18 type.
function lshift(UD60x18 x, uint256 bits) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() << bits);
}

/// @notice Implements the lower than operation (<) in the UD60x18 type.
function lt(UD60x18 x, UD60x18 y) pure returns (bool result) {
    result = x.unwrap() < y.unwrap();
}

/// @notice Implements the lower than or equal to operation (<=) in the UD60x18 type.
function lte(UD60x18 x, UD60x18 y) pure returns (bool result) {
    result = x.unwrap() <= y.unwrap();
}

/// @notice Implements the checked modulo operation (%) in the UD60x18 type.
function mod(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() % y.unwrap());
}

/// @notice Implements the not equal operation (!=) in the UD60x18 type.
function neq(UD60x18 x, UD60x18 y) pure returns (bool result) {
    result = x.unwrap() != y.unwrap();
}

/// @notice Implements the NOT (~) bitwise operation in the UD60x18 type.
function not(UD60x18 x) pure returns (UD60x18 result) {
    result = wrap(~x.unwrap());
}

/// @notice Implements the OR (|) bitwise operation in the UD60x18 type.
function or(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() | y.unwrap());
}

/// @notice Implements the right shift operation (>>) in the UD60x18 type.
function rshift(UD60x18 x, uint256 bits) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() >> bits);
}

/// @notice Implements the checked subtraction operation (-) in the UD60x18 type.
function sub(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() - y.unwrap());
}

/// @notice Implements the unchecked addition operation (+) in the UD60x18 type.
function uncheckedAdd(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    unchecked {
        result = wrap(x.unwrap() + y.unwrap());
    }
}

/// @notice Implements the unchecked subtraction operation (-) in the UD60x18 type.
function uncheckedSub(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    unchecked {
        result = wrap(x.unwrap() - y.unwrap());
    }
}

/// @notice Implements the XOR (^) bitwise operation in the UD60x18 type.
function xor(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() ^ y.unwrap());
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;

import { PrizeHooks } from "../interfaces/IPrizeHooks.sol";

/// @title  PoolTogether V5 HookManager
/// @author G9 Software Inc.
/// @notice Allows each account to set and manage prize hooks that can be called when they win.
abstract contract HookManager {

    /// @notice Emitted when an account sets new hooks
    /// @param account The account whose hooks are being configured
    /// @param hooks The hooks being set
    event SetHooks(address indexed account, PrizeHooks hooks);

    /// @notice Maps user addresses to hooks that they want to execute when prizes are won.
    mapping(address => PrizeHooks) internal _hooks;

    /// @notice Gets the hooks for the given account.
    /// @param account The account to retrieve the hooks for
    /// @return PrizeHooks The hooks for the given account
    function getHooks(address account) external view returns (PrizeHooks memory) {
        return _hooks[account];
    }

    /// @notice Sets the hooks for a winner.
    /// @dev Emits a `SetHooks` event
    /// @param hooks The hooks to set
    function setHooks(PrizeHooks calldata hooks) external {
        _hooks[msg.sender] = hooks;
        emit SetHooks(msg.sender, hooks);
    }
    
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

/**
 * @title  PoolTogether V5 Claimable Interface
 * @author G9 Software Inc.
 * @notice Provides a concise and consistent interface for Claimer contracts to interact with Vaults
 * in PoolTogether V5.
 */
interface IClaimable {
  /**
   * @notice Emitted when a new claimer has been set
   * @dev This event MUST be emitted when a new claimer has been set.
   * @param claimer Address of the new claimer
   */
  event ClaimerSet(address indexed claimer);

  /**
   * @notice Claim a prize for a winner
   * @param _winner The winner of the prize
   * @param _tier The prize tier
   * @param _prizeIndex The prize index
   * @param _reward The reward to allocate to the reward recipient, in prize tokens
   * @param _rewardRecipient The recipient of the reward
   * @return The total prize token amount claimed (zero if already claimed)
   */
  function claimPrize(
    address _winner,
    uint8 _tier,
    uint32 _prizeIndex,
    uint96 _reward,
    address _rewardRecipient
  ) external returns (uint256);

  /**
   * @notice Gets the current address that can call `claimPrize`.
   * @return The claimer address
   */
  function claimer() external returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.0;

import "../token/ERC20/IERC20.sol";
import "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 *
 * _Available since v4.7._
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.0;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface ILiquidationSource {

  /**
   * @notice Emitted when a new liquidation pair is set for the given `tokenOut`.
   * @param tokenOut The token being liquidated
   * @param liquidationPair The new liquidation pair for the token
   */
  event LiquidationPairSet(address indexed tokenOut, address indexed liquidationPair);

  /**
   * @notice Get the available amount of tokens that can be swapped.
   * @param tokenOut Address of the token to get available balance for
   * @return uint256 Available amount of `token`
   */
  function liquidatableBalanceOf(address tokenOut) external returns (uint256);

  /**
   * @notice Transfers tokens to the receiver
   * @param sender Address that triggered the liquidation
   * @param receiver Address of the account that will receive `tokenOut`
   * @param tokenOut Address of the token being bought
   * @param amountOut Amount of token being bought
   */
  function transferTokensOut(
    address sender,
    address receiver,
    address tokenOut,
    uint256 amountOut
  ) external returns (bytes memory);

  /**
   * @notice Verifies that tokens have been transferred in.
   * @param tokenIn Address of the token being sold
   * @param amountIn Amount of token being sold
   * @param transferTokensOutData Data returned by the corresponding transferTokensOut call
   */
  function verifyTokensIn(
    address tokenIn,
    uint256 amountIn,
    bytes calldata transferTokensOutData
  ) external;

  /**
   * @notice Get the address that will receive `tokenIn`.
   * @param tokenIn Address of the token to get the target address for
   * @return address Address of the target
   */
  function targetOf(address tokenIn) external returns (address);

  /**
   * @notice Checks if a liquidation pair can be used to liquidate the given tokenOut from this source.
   * @param tokenOut The address of the token to liquidate
   * @param liquidationPair The address of the liquidation pair that is being checked
   * @return bool True if the liquidation pair can be used, false otherwise
   */
  function isLiquidationPair(address tokenOut, address liquidationPair) external returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;

/// @notice Defines a hook implementation and instructions on which hooks to call.
/// @param useBeforeClaimPrize If true, the vault will call the beforeClaimPrize hook on the implementation
/// @param useAfterClaimPrize If true, the vault will call the afterClaimPrize hook on the implementation
/// @param implementation The address of the smart contract implementing the hooks
struct PrizeHooks {
    bool useBeforeClaimPrize;
    bool useAfterClaimPrize;
    IPrizeHooks implementation;
}

/// @title  PoolTogether V5 Prize Hooks Interface
/// @author PoolTogether Inc. & G9 Software Inc.
/// @notice Allows winners to attach smart contract hooks to their prize winnings
interface IPrizeHooks {
    
    /// @notice Triggered before the prize pool claim prize function is called.
    /// @param winner The user who won the prize and for whom this hook is attached
    /// @param tier The tier of the prize
    /// @param prizeIndex The index of the prize in the tier
    /// @param reward The reward portion of the prize that will be allocated to the claimer
    /// @param rewardRecipient The recipient of the claim reward
    /// @return prizeRecipient The address of the recipient of the prize
    /// @return data Arbitrary data that will be passed to the `afterClaimPrize` hook
    function beforeClaimPrize(
        address winner,
        uint8 tier,
        uint32 prizeIndex,
        uint96 reward,
        address rewardRecipient
    ) external returns (address prizeRecipient, bytes memory data);

    /// @notice Triggered after the prize pool claim prize function is called.
    /// @param winner The user who won the prize and for whom this hook is attached
    /// @param tier The tier of the prize
    /// @param prizeIndex The index of the prize
    /// @param prize The total size of the prize (not including the claim reward)
    /// @param prizeRecipient The recipient of the prize
    /// @param data Arbitrary data received from the `beforeClaimPrize` hook
    function afterClaimPrize(
        address winner,
        uint8 tier,
        uint32 prizeIndex,
        uint256 prize,
        address prizeRecipient,
        bytes memory data
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "../Common.sol" as Common;
import "./Errors.sol" as Errors;
import { wrap } from "./Casting.sol";
import {
    uEXP_MAX_INPUT,
    uEXP2_MAX_INPUT,
    uHALF_UNIT,
    uLOG2_10,
    uLOG2_E,
    uMAX_UD60x18,
    uMAX_WHOLE_UD60x18,
    UNIT,
    uUNIT,
    uUNIT_SQUARED,
    ZERO
} from "./Constants.sol";
import { UD60x18 } from "./ValueType.sol";

/*//////////////////////////////////////////////////////////////////////////
                            MATHEMATICAL FUNCTIONS
//////////////////////////////////////////////////////////////////////////*/

/// @notice Calculates the arithmetic average of x and y using the following formula:
///
/// $$
/// avg(x, y) = (x & y) + ((xUint ^ yUint) / 2)
/// $$
///
/// In English, this is what this formula does:
///
/// 1. AND x and y.
/// 2. Calculate half of XOR x and y.
/// 3. Add the two results together.
///
/// This technique is known as SWAR, which stands for "SIMD within a register". You can read more about it here:
/// https://devblogs.microsoft.com/oldnewthing/20220207-00/?p=106223
///
/// @dev Notes:
/// - The result is rounded toward zero.
///
/// @param x The first operand as a UD60x18 number.
/// @param y The second operand as a UD60x18 number.
/// @return result The arithmetic average as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function avg(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    uint256 yUint = y.unwrap();
    unchecked {
        result = wrap((xUint & yUint) + ((xUint ^ yUint) >> 1));
    }
}

/// @notice Yields the smallest whole number greater than or equal to x.
///
/// @dev This is optimized for fractional value inputs, because for every whole value there are (1e18 - 1) fractional
/// counterparts. See https://en.wikipedia.org/wiki/Floor_and_ceiling_functions.
///
/// Requirements:
/// - x must be less than or equal to `MAX_WHOLE_UD60x18`.
///
/// @param x The UD60x18 number to ceil.
/// @param result The smallest whole number greater than or equal to x, as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function ceil(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    if (xUint > uMAX_WHOLE_UD60x18) {
        revert Errors.PRBMath_UD60x18_Ceil_Overflow(x);
    }

    assembly ("memory-safe") {
        // Equivalent to `x % UNIT`.
        let remainder := mod(x, uUNIT)

        // Equivalent to `UNIT - remainder`.
        let delta := sub(uUNIT, remainder)

        // Equivalent to `x + remainder > 0 ? delta : 0`.
        result := add(x, mul(delta, gt(remainder, 0)))
    }
}

/// @notice Divides two UD60x18 numbers, returning a new UD60x18 number.
///
/// @dev Uses {Common.mulDiv} to enable overflow-safe multiplication and division.
///
/// Notes:
/// - Refer to the notes in {Common.mulDiv}.
///
/// Requirements:
/// - Refer to the requirements in {Common.mulDiv}.
///
/// @param x The numerator as a UD60x18 number.
/// @param y The denominator as a UD60x18 number.
/// @param result The quotient as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function div(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(Common.mulDiv(x.unwrap(), uUNIT, y.unwrap()));
}

/// @notice Calculates the natural exponent of x using the following formula:
///
/// $$
/// e^x = 2^{x * log_2{e}}
/// $$
///
/// @dev Requirements:
/// - x must be less than 133_084258667509499441.
///
/// @param x The exponent as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function exp(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();

    // This check prevents values greater than 192e18 from being passed to {exp2}.
    if (xUint > uEXP_MAX_INPUT) {
        revert Errors.PRBMath_UD60x18_Exp_InputTooBig(x);
    }

    unchecked {
        // Inline the fixed-point multiplication to save gas.
        uint256 doubleUnitProduct = xUint * uLOG2_E;
        result = exp2(wrap(doubleUnitProduct / uUNIT));
    }
}

/// @notice Calculates the binary exponent of x using the binary fraction method.
///
/// @dev See https://ethereum.stackexchange.com/q/79903/24693
///
/// Requirements:
/// - x must be less than 192e18.
/// - The result must fit in UD60x18.
///
/// @param x The exponent as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function exp2(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();

    // Numbers greater than or equal to 192e18 don't fit in the 192.64-bit format.
    if (xUint > uEXP2_MAX_INPUT) {
        revert Errors.PRBMath_UD60x18_Exp2_InputTooBig(x);
    }

    // Convert x to the 192.64-bit fixed-point format.
    uint256 x_192x64 = (xUint << 64) / uUNIT;

    // Pass x to the {Common.exp2} function, which uses the 192.64-bit fixed-point number representation.
    result = wrap(Common.exp2(x_192x64));
}

/// @notice Yields the greatest whole number less than or equal to x.
/// @dev Optimized for fractional value inputs, because every whole value has (1e18 - 1) fractional counterparts.
/// See https://en.wikipedia.org/wiki/Floor_and_ceiling_functions.
/// @param x The UD60x18 number to floor.
/// @param result The greatest whole number less than or equal to x, as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function floor(UD60x18 x) pure returns (UD60x18 result) {
    assembly ("memory-safe") {
        // Equivalent to `x % UNIT`.
        let remainder := mod(x, uUNIT)

        // Equivalent to `x - remainder > 0 ? remainder : 0)`.
        result := sub(x, mul(remainder, gt(remainder, 0)))
    }
}

/// @notice Yields the excess beyond the floor of x using the odd function definition.
/// @dev See https://en.wikipedia.org/wiki/Fractional_part.
/// @param x The UD60x18 number to get the fractional part of.
/// @param result The fractional part of x as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function frac(UD60x18 x) pure returns (UD60x18 result) {
    assembly ("memory-safe") {
        result := mod(x, uUNIT)
    }
}

/// @notice Calculates the geometric mean of x and y, i.e. $\sqrt{x * y}$, rounding down.
///
/// @dev Requirements:
/// - x * y must fit in UD60x18.
///
/// @param x The first operand as a UD60x18 number.
/// @param y The second operand as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function gm(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    uint256 yUint = y.unwrap();
    if (xUint == 0 || yUint == 0) {
        return ZERO;
    }

    unchecked {
        // Checking for overflow this way is faster than letting Solidity do it.
        uint256 xyUint = xUint * yUint;
        if (xyUint / xUint != yUint) {
            revert Errors.PRBMath_UD60x18_Gm_Overflow(x, y);
        }

        // We don't need to multiply the result by `UNIT` here because the x*y product picked up a factor of `UNIT`
        // during multiplication. See the comments in {Common.sqrt}.
        result = wrap(Common.sqrt(xyUint));
    }
}

/// @notice Calculates the inverse of x.
///
/// @dev Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - x must not be zero.
///
/// @param x The UD60x18 number for which to calculate the inverse.
/// @return result The inverse as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function inv(UD60x18 x) pure returns (UD60x18 result) {
    unchecked {
        result = wrap(uUNIT_SQUARED / x.unwrap());
    }
}

/// @notice Calculates the natural logarithm of x using the following formula:
///
/// $$
/// ln{x} = log_2{x} / log_2{e}
/// $$
///
/// @dev Notes:
/// - Refer to the notes in {log2}.
/// - The precision isn't sufficiently fine-grained to return exactly `UNIT` when the input is `E`.
///
/// Requirements:
/// - Refer to the requirements in {log2}.
///
/// @param x The UD60x18 number for which to calculate the natural logarithm.
/// @return result The natural logarithm as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function ln(UD60x18 x) pure returns (UD60x18 result) {
    unchecked {
        // Inline the fixed-point multiplication to save gas. This is overflow-safe because the maximum value that
        // {log2} can return is ~196_205294292027477728.
        result = wrap(log2(x).unwrap() * uUNIT / uLOG2_E);
    }
}

/// @notice Calculates the common logarithm of x using the following formula:
///
/// $$
/// log_{10}{x} = log_2{x} / log_2{10}
/// $$
///
/// However, if x is an exact power of ten, a hard coded value is returned.
///
/// @dev Notes:
/// - Refer to the notes in {log2}.
///
/// Requirements:
/// - Refer to the requirements in {log2}.
///
/// @param x The UD60x18 number for which to calculate the common logarithm.
/// @return result The common logarithm as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function log10(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    if (xUint < uUNIT) {
        revert Errors.PRBMath_UD60x18_Log_InputTooSmall(x);
    }

    // Note that the `mul` in this assembly block is the standard multiplication operation, not {UD60x18.mul}.
    // prettier-ignore
    assembly ("memory-safe") {
        switch x
        case 1 { result := mul(uUNIT, sub(0, 18)) }
        case 10 { result := mul(uUNIT, sub(1, 18)) }
        case 100 { result := mul(uUNIT, sub(2, 18)) }
        case 1000 { result := mul(uUNIT, sub(3, 18)) }
        case 10000 { result := mul(uUNIT, sub(4, 18)) }
        case 100000 { result := mul(uUNIT, sub(5, 18)) }
        case 1000000 { result := mul(uUNIT, sub(6, 18)) }
        case 10000000 { result := mul(uUNIT, sub(7, 18)) }
        case 100000000 { result := mul(uUNIT, sub(8, 18)) }
        case 1000000000 { result := mul(uUNIT, sub(9, 18)) }
        case 10000000000 { result := mul(uUNIT, sub(10, 18)) }
        case 100000000000 { result := mul(uUNIT, sub(11, 18)) }
        case 1000000000000 { result := mul(uUNIT, sub(12, 18)) }
        case 10000000000000 { result := mul(uUNIT, sub(13, 18)) }
        case 100000000000000 { result := mul(uUNIT, sub(14, 18)) }
        case 1000000000000000 { result := mul(uUNIT, sub(15, 18)) }
        case 10000000000000000 { result := mul(uUNIT, sub(16, 18)) }
        case 100000000000000000 { result := mul(uUNIT, sub(17, 18)) }
        case 1000000000000000000 { result := 0 }
        case 10000000000000000000 { result := uUNIT }
        case 100000000000000000000 { result := mul(uUNIT, 2) }
        case 1000000000000000000000 { result := mul(uUNIT, 3) }
        case 10000000000000000000000 { result := mul(uUNIT, 4) }
        case 100000000000000000000000 { result := mul(uUNIT, 5) }
        case 1000000000000000000000000 { result := mul(uUNIT, 6) }
        case 10000000000000000000000000 { result := mul(uUNIT, 7) }
        case 100000000000000000000000000 { result := mul(uUNIT, 8) }
        case 1000000000000000000000000000 { result := mul(uUNIT, 9) }
        case 10000000000000000000000000000 { result := mul(uUNIT, 10) }
        case 100000000000000000000000000000 { result := mul(uUNIT, 11) }
        case 1000000000000000000000000000000 { result := mul(uUNIT, 12) }
        case 10000000000000000000000000000000 { result := mul(uUNIT, 13) }
        case 100000000000000000000000000000000 { result := mul(uUNIT, 14) }
        case 1000000000000000000000000000000000 { result := mul(uUNIT, 15) }
        case 10000000000000000000000000000000000 { result := mul(uUNIT, 16) }
        case 100000000000000000000000000000000000 { result := mul(uUNIT, 17) }
        case 1000000000000000000000000000000000000 { result := mul(uUNIT, 18) }
        case 10000000000000000000000000000000000000 { result := mul(uUNIT, 19) }
        case 100000000000000000000000000000000000000 { result := mul(uUNIT, 20) }
        case 1000000000000000000000000000000000000000 { result := mul(uUNIT, 21) }
        case 10000000000000000000000000000000000000000 { result := mul(uUNIT, 22) }
        case 100000000000000000000000000000000000000000 { result := mul(uUNIT, 23) }
        case 1000000000000000000000000000000000000000000 { result := mul(uUNIT, 24) }
        case 10000000000000000000000000000000000000000000 { result := mul(uUNIT, 25) }
        case 100000000000000000000000000000000000000000000 { result := mul(uUNIT, 26) }
        case 1000000000000000000000000000000000000000000000 { result := mul(uUNIT, 27) }
        case 10000000000000000000000000000000000000000000000 { result := mul(uUNIT, 28) }
        case 100000000000000000000000000000000000000000000000 { result := mul(uUNIT, 29) }
        case 1000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 30) }
        case 10000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 31) }
        case 100000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 32) }
        case 1000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 33) }
        case 10000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 34) }
        case 100000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 35) }
        case 1000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 36) }
        case 10000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 37) }
        case 100000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 38) }
        case 1000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 39) }
        case 10000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 40) }
        case 100000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 41) }
        case 1000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 42) }
        case 10000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 43) }
        case 100000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 44) }
        case 1000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 45) }
        case 10000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 46) }
        case 100000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 47) }
        case 1000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 48) }
        case 10000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 49) }
        case 100000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 50) }
        case 1000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 51) }
        case 10000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 52) }
        case 100000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 53) }
        case 1000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 54) }
        case 10000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 55) }
        case 100000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 56) }
        case 1000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 57) }
        case 10000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 58) }
        case 100000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 59) }
        default { result := uMAX_UD60x18 }
    }

    if (result.unwrap() == uMAX_UD60x18) {
        unchecked {
            // Inline the fixed-point division to save gas.
            result = wrap(log2(x).unwrap() * uUNIT / uLOG2_10);
        }
    }
}

/// @notice Calculates the binary logarithm of x using the iterative approximation algorithm:
///
/// $$
/// log_2{x} = n + log_2{y}, \text{ where } y = x*2^{-n}, \ y \in [1, 2)
/// $$
///
/// For $0 \leq x \lt 1$, the input is inverted:
///
/// $$
/// log_2{x} = -log_2{\frac{1}{x}}
/// $$
///
/// @dev See https://en.wikipedia.org/wiki/Binary_logarithm#Iterative_approximation
///
/// Notes:
/// - Due to the lossy precision of the iterative approximation, the results are not perfectly accurate to the last decimal.
///
/// Requirements:
/// - x must be greater than zero.
///
/// @param x The UD60x18 number for which to calculate the binary logarithm.
/// @return result The binary logarithm as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function log2(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();

    if (xUint < uUNIT) {
        revert Errors.PRBMath_UD60x18_Log_InputTooSmall(x);
    }

    unchecked {
        // Calculate the integer part of the logarithm.
        uint256 n = Common.msb(xUint / uUNIT);

        // This is the integer part of the logarithm as a UD60x18 number. The operation can't overflow because n
        // n is at most 255 and UNIT is 1e18.
        uint256 resultUint = n * uUNIT;

        // Calculate $y = x * 2^{-n}$.
        uint256 y = xUint >> n;

        // If y is the unit number, the fractional part is zero.
        if (y == uUNIT) {
            return wrap(resultUint);
        }

        // Calculate the fractional part via the iterative approximation.
        // The `delta >>= 1` part is equivalent to `delta /= 2`, but shifting bits is more gas efficient.
        uint256 DOUBLE_UNIT = 2e18;
        for (uint256 delta = uHALF_UNIT; delta > 0; delta >>= 1) {
            y = (y * y) / uUNIT;

            // Is y^2 >= 2e18 and so in the range [2e18, 4e18)?
            if (y >= DOUBLE_UNIT) {
                // Add the 2^{-m} factor to the logarithm.
                resultUint += delta;

                // Halve y, which corresponds to z/2 in the Wikipedia article.
                y >>= 1;
            }
        }
        result = wrap(resultUint);
    }
}

/// @notice Multiplies two UD60x18 numbers together, returning a new UD60x18 number.
///
/// @dev Uses {Common.mulDiv} to enable overflow-safe multiplication and division.
///
/// Notes:
/// - Refer to the notes in {Common.mulDiv}.
///
/// Requirements:
/// - Refer to the requirements in {Common.mulDiv}.
///
/// @dev See the documentation in {Common.mulDiv18}.
/// @param x The multiplicand as a UD60x18 number.
/// @param y The multiplier as a UD60x18 number.
/// @return result The product as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function mul(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(Common.mulDiv18(x.unwrap(), y.unwrap()));
}

/// @notice Raises x to the power of y.
///
/// For $1 \leq x \leq \infty$, the following standard formula is used:
///
/// $$
/// x^y = 2^{log_2{x} * y}
/// $$
///
/// For $0 \leq x \lt 1$, since the unsigned {log2} is undefined, an equivalent formula is used:
///
/// $$
/// i = \frac{1}{x}
/// w = 2^{log_2{i} * y}
/// x^y = \frac{1}{w}
/// $$
///
/// @dev Notes:
/// - Refer to the notes in {log2} and {mul}.
/// - Returns `UNIT` for 0^0.
/// - It may not perform well with very small values of x. Consider using SD59x18 as an alternative.
///
/// Requirements:
/// - Refer to the requirements in {exp2}, {log2}, and {mul}.
///
/// @param x The base as a UD60x18 number.
/// @param y The exponent as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function pow(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    uint256 yUint = y.unwrap();

    // If both x and y are zero, the result is `UNIT`. If just x is zero, the result is always zero.
    if (xUint == 0) {
        return yUint == 0 ? UNIT : ZERO;
    }
    // If x is `UNIT`, the result is always `UNIT`.
    else if (xUint == uUNIT) {
        return UNIT;
    }

    // If y is zero, the result is always `UNIT`.
    if (yUint == 0) {
        return UNIT;
    }
    // If y is `UNIT`, the result is always x.
    else if (yUint == uUNIT) {
        return x;
    }

    // If x is greater than `UNIT`, use the standard formula.
    if (xUint > uUNIT) {
        result = exp2(mul(log2(x), y));
    }
    // Conversely, if x is less than `UNIT`, use the equivalent formula.
    else {
        UD60x18 i = wrap(uUNIT_SQUARED / xUint);
        UD60x18 w = exp2(mul(log2(i), y));
        result = wrap(uUNIT_SQUARED / w.unwrap());
    }
}

/// @notice Raises x (a UD60x18 number) to the power y (an unsigned basic integer) using the well-known
/// algorithm "exponentiation by squaring".
///
/// @dev See https://en.wikipedia.org/wiki/Exponentiation_by_squaring.
///
/// Notes:
/// - Refer to the notes in {Common.mulDiv18}.
/// - Returns `UNIT` for 0^0.
///
/// Requirements:
/// - The result must fit in UD60x18.
///
/// @param x The base as a UD60x18 number.
/// @param y The exponent as a uint256.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function powu(UD60x18 x, uint256 y) pure returns (UD60x18 result) {
    // Calculate the first iteration of the loop in advance.
    uint256 xUint = x.unwrap();
    uint256 resultUint = y & 1 > 0 ? xUint : uUNIT;

    // Equivalent to `for(y /= 2; y > 0; y /= 2)`.
    for (y >>= 1; y > 0; y >>= 1) {
        xUint = Common.mulDiv18(xUint, xUint);

        // Equivalent to `y % 2 == 1`.
        if (y & 1 > 0) {
            resultUint = Common.mulDiv18(resultUint, xUint);
        }
    }
    result = wrap(resultUint);
}

/// @notice Calculates the square root of x using the Babylonian method.
///
/// @dev See https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method.
///
/// Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - x must be less than `MAX_UD60x18 / UNIT`.
///
/// @param x The UD60x18 number for which to calculate the square root.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function sqrt(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();

    unchecked {
        if (xUint > uMAX_UD60x18 / uUNIT) {
            revert Errors.PRBMath_UD60x18_Sqrt_Overflow(x);
        }
        // Multiply x by `UNIT` to account for the factor of `UNIT` picked up when multiplying two UD60x18 numbers.
        // In this case, the two numbers are both the square root.
        result = wrap(Common.sqrt(xUint * uUNIT));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.19;

import "ring-buffer-lib/RingBufferLib.sol";

/**
 * @dev Sets max ring buffer length in the Account.observations Observation list.
 *         As users transfer/mint/burn tickets new Observation checkpoints are recorded.
 *         The current `MAX_CARDINALITY` guarantees a one year minimum, of accurate historical lookups.
 * @dev The user Account.Account.cardinality parameter can NOT exceed the max cardinality variable.
 *      Preventing "corrupted" ring buffer lookup pointers and new observation checkpoints.
 */
uint16 constant MAX_CARDINALITY = 17520; // with min period of 1 hour, this allows for minimum two years of history

/**
 * @title PoolTogether V5 Observation Library
 * @author PoolTogether Inc. & G9 Software Inc.
 * @notice This library allows one to store an array of timestamped values and efficiently search them.
 * @dev Largely pulled from Uniswap V3 Oracle.sol: https://github.com/Uniswap/v3-core/blob/c05a0e2c8c08c460fb4d05cfdda30b3ad8deeaac/contracts/libraries/Oracle.sol
 */
library ObservationLib {
  /**
   * @notice Observation, which includes an amount and timestamp.
   * @param cumulativeBalance the cumulative time-weighted balance at `timestamp`.
   * @param balance `balance` at `timestamp`.
   * @param timestamp Recorded `timestamp`.
   */
  struct Observation {
    uint128 cumulativeBalance;
    uint96 balance;
    uint32 timestamp;
  }

  /**
   * @notice Fetches Observations `beforeOrAt` and `afterOrAt` a `_target`, eg: where [`beforeOrAt`, `afterOrAt`] is satisfied.
   * The result may be the same Observation, or adjacent Observations.
   * @dev The _target must fall within the boundaries of the provided _observations.
   * Meaning the _target must be: older than the most recent Observation and younger, or the same age as, the oldest Observation.
   * @dev  If `_newestObservationIndex` is less than `_oldestObservationIndex`, it means that we've wrapped around the circular buffer.
   *       So the most recent observation will be at `_oldestObservationIndex + _cardinality - 1`, at the beginning of the circular buffer.
   * @param _observations List of Observations to search through.
   * @param _newestObservationIndex Index of the newest Observation. Right side of the circular buffer.
   * @param _oldestObservationIndex Index of the oldest Observation. Left side of the circular buffer.
   * @param _target Timestamp at which we are searching the Observation.
   * @param _cardinality Cardinality of the circular buffer we are searching through.
   * @return beforeOrAt Observation recorded before, or at, the target.
   * @return beforeOrAtIndex Index of observation recorded before, or at, the target.
   * @return afterOrAt Observation recorded at, or after, the target.
   * @return afterOrAtIndex Index of observation recorded at, or after, the target.
   */
  function binarySearch(
    Observation[MAX_CARDINALITY] storage _observations,
    uint24 _newestObservationIndex,
    uint24 _oldestObservationIndex,
    uint32 _target,
    uint16 _cardinality
  )
    internal
    view
    returns (
      Observation memory beforeOrAt,
      uint16 beforeOrAtIndex,
      Observation memory afterOrAt,
      uint16 afterOrAtIndex
    )
  {
    uint256 leftSide = _oldestObservationIndex;
    uint256 rightSide = _newestObservationIndex < leftSide
      ? leftSide + _cardinality - 1
      : _newestObservationIndex;
    uint256 currentIndex;

    while (true) {
      // We start our search in the middle of the `leftSide` and `rightSide`.
      // After each iteration, we narrow down the search to the left or the right side while still starting our search in the middle.
      currentIndex = (leftSide + rightSide) / 2;

      beforeOrAtIndex = uint16(RingBufferLib.wrap(currentIndex, _cardinality));
      beforeOrAt = _observations[beforeOrAtIndex];
      uint32 beforeOrAtTimestamp = beforeOrAt.timestamp;

      afterOrAtIndex = uint16(RingBufferLib.nextIndex(currentIndex, _cardinality));
      afterOrAt = _observations[afterOrAtIndex];

      bool targetAfterOrAt = beforeOrAtTimestamp <= _target;

      // Check if we've found the corresponding Observation.
      if (targetAfterOrAt && _target <= afterOrAt.timestamp) {
        break;
      }

      // If `beforeOrAtTimestamp` is greater than `_target`, then we keep searching lower. To the left of the current index.
      if (!targetAfterOrAt) {
        rightSide = currentIndex - 1;
      } else {
        // Otherwise, we keep searching higher. To the right of the current index.
        leftSide = currentIndex + 1;
      }
    }
  }
}

// SPDX-License-Identifier: GPL-3.0

pragma solidity ^0.8.0;

/**
 * @title Abstract ownable contract that can be inherited by other contracts
 * @notice Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The `owner` is first set by passing the address of the `initialOwner` to the Ownable constructor.
 *
 * The owner account can be transferred through a two steps process:
 *      1. The current `owner` calls {transferOwnership} to set a `pendingOwner`
 *      2. The `pendingOwner` calls {claimOwnership} to accept the ownership transfer
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to the owner.
 */
abstract contract Ownable {
    address private _owner;
    address private _pendingOwner;

    /**
     * @dev Emitted when `_pendingOwner` has been changed.
     * @param pendingOwner new `_pendingOwner` address.
     */
    event OwnershipOffered(address indexed pendingOwner);

    /**
     * @dev Emitted when `_owner` has been changed.
     * @param previousOwner previous `_owner` address.
     * @param newOwner new `_owner` address.
     */
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /* ============ Deploy ============ */

    /**
     * @notice Initializes the contract setting `_initialOwner` as the initial owner.
     * @param _initialOwner Initial owner of the contract.
     */
    constructor(address _initialOwner) {
        _setOwner(_initialOwner);
    }

    /* ============ External Functions ============ */

    /**
     * @notice Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @notice Gets current `_pendingOwner`.
     * @return Current `_pendingOwner` address.
     */
    function pendingOwner() external view virtual returns (address) {
        return _pendingOwner;
    }

    /**
     * @notice Renounce ownership of the contract.
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() external virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
    * @notice Allows current owner to set the `_pendingOwner` address.
    * @param _newOwner Address to transfer ownership to.
    */
    function transferOwnership(address _newOwner) external onlyOwner {
        require(_newOwner != address(0), "Ownable/pendingOwner-not-zero-address");

        _pendingOwner = _newOwner;

        emit OwnershipOffered(_newOwner);
    }

    /**
    * @notice Allows the `_pendingOwner` address to finalize the transfer.
    * @dev This function is only callable by the `_pendingOwner`.
    */
    function claimOwnership() external onlyPendingOwner {
        _setOwner(_pendingOwner);
        _pendingOwner = address(0);
    }

    /* ============ Internal Functions ============ */

    /**
     * @notice Internal function to set the `_owner` of the contract.
     * @param _newOwner New `_owner` address.
     */
    function _setOwner(address _newOwner) private {
        address _oldOwner = _owner;
        _owner = _newOwner;
        emit OwnershipTransferred(_oldOwner, _newOwner);
    }

    /* ============ Modifier Functions ============ */

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == msg.sender, "Ownable/caller-not-owner");
        _;
    }

    /**
    * @dev Throws if called by any account other than the `pendingOwner`.
    */
    modifier onlyPendingOwner() {
        require(msg.sender == _pendingOwner, "Ownable/caller-not-pendingOwner");
        _;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;

import { SafeCast } from "openzeppelin/utils/math/SafeCast.sol";
import { IERC20 } from "openzeppelin/token/ERC20/IERC20.sol";
import { SafeERC20 } from "openzeppelin/token/ERC20/utils/SafeERC20.sol";
import { SD59x18, convert, sd } from "prb-math/SD59x18.sol";
import { SD1x18, unwrap, UNIT } from "prb-math/SD1x18.sol";
import { TwabController } from "pt-v5-twab-controller/TwabController.sol";

import { DrawAccumulatorLib, Observation, MAX_OBSERVATION_CARDINALITY } from "./libraries/DrawAccumulatorLib.sol";
import { TieredLiquidityDistributor, Tier } from "./abstract/TieredLiquidityDistributor.sol";
import { TierCalculationLib } from "./libraries/TierCalculationLib.sol";

/// @notice Thrown when the prize pool is constructed with a first draw open timestamp that is in the past
error FirstDrawOpensInPast();

/// @notice Thrown when the Twab Controller has an incompatible period length
error IncompatibleTwabPeriodLength();

/// @notice Thrown when the Twab Controller has an incompatible period offset
error IncompatibleTwabPeriodOffset();

/// @notice Thrown when someone tries to set the draw manager with the zero address
error DrawManagerIsZeroAddress();

/// @notice Thrown when the passed creator is the zero address
error CreatorIsZeroAddress();

/// @notice Thrown when the caller is not the deployer.
error NotDeployer();

/// @notice Thrown when the range start draw id is computed with range of zero
error RangeSizeZero();

/// @notice Thrown if the prize pool has shutdown
error PrizePoolShutdown();

/// @notice Thrown if the prize pool is not shutdown
error PrizePoolNotShutdown();

/// @notice Thrown when someone tries to withdraw too many rewards.
/// @param requested The requested reward amount to withdraw
/// @param available The total reward amount available for the caller to withdraw
error InsufficientRewardsError(uint256 requested, uint256 available);

/// @notice Thrown when an address did not win the specified prize on a vault when claiming.
/// @param vault The vault address
/// @param winner The address checked for the prize
/// @param tier The prize tier
/// @param prizeIndex The prize index
error DidNotWin(address vault, address winner, uint8 tier, uint32 prizeIndex);

/// @notice Thrown when the prize being claimed has already been claimed
/// @param vault The vault address
/// @param winner The address checked for the prize
/// @param tier The prize tier
/// @param prizeIndex The prize index
error AlreadyClaimed(address vault, address winner, uint8 tier, uint32 prizeIndex);

/// @notice Thrown when the claim reward exceeds the maximum.
/// @param reward The reward being claimed
/// @param maxReward The max reward that can be claimed
error RewardTooLarge(uint256 reward, uint256 maxReward);

/// @notice Thrown when the contributed amount is more than the available, un-accounted balance.
/// @param amount The contribution amount that is being claimed
/// @param available The available un-accounted balance that can be claimed as a contribution
error ContributionGTDeltaBalance(uint256 amount, uint256 available);

/// @notice Thrown when the withdraw amount is greater than the available reserve.
/// @param amount The amount being withdrawn
/// @param reserve The total reserve available for withdrawal
error InsufficientReserve(uint104 amount, uint104 reserve);

/// @notice Thrown when the winning random number is zero.
error RandomNumberIsZero();

/// @notice Thrown when the draw cannot be awarded since it has not closed.
/// @param drawClosesAt The timestamp in seconds at which the draw closes
error AwardingDrawNotClosed(uint48 drawClosesAt);

/// @notice Thrown when prize index is greater or equal to the max prize count for the tier.
/// @param invalidPrizeIndex The invalid prize index
/// @param prizeCount The prize count for the tier
/// @param tier The tier number
error InvalidPrizeIndex(uint32 invalidPrizeIndex, uint32 prizeCount, uint8 tier);

/// @notice Thrown when there are no awarded draws when a computation requires an awarded draw.
error NoDrawsAwarded();

/// @notice Thrown when the Prize Pool is constructed with a draw timeout of zero
error DrawTimeoutIsZero();

/// @notice Thrown when the Prize Pool is constructed with a draw timeout greater than the grand prize period draws
error DrawTimeoutGTGrandPrizePeriodDraws();

/// @notice Thrown when attempting to claim from a tier that does not exist.
/// @param tier The tier number that does not exist
/// @param numberOfTiers The current number of tiers
error InvalidTier(uint8 tier, uint8 numberOfTiers);

/// @notice Thrown when the caller is not the draw manager.
/// @param caller The caller address
/// @param drawManager The drawManager address
error CallerNotDrawManager(address caller, address drawManager);

/// @notice Thrown when someone tries to claim a prize that is zero size
error PrizeIsZero();

/// @notice Thrown when someone tries to claim a prize, but sets the reward recipient address to the zero address.
error RewardRecipientZeroAddress();

/// @notice Thrown when a claim is attempted after the claiming period has expired.
error ClaimPeriodExpired();

/// @notice Thrown when anyone but the creator calls a privileged function
error OnlyCreator();

/// @notice Thrown when the draw manager has already been set
error DrawManagerAlreadySet();

/// @notice Thrown when the grand prize period is too large
/// @param grandPrizePeriodDraws The set grand prize period
/// @param maxGrandPrizePeriodDraws The max grand prize period
error GrandPrizePeriodDrawsTooLarge(uint24 grandPrizePeriodDraws, uint24 maxGrandPrizePeriodDraws);

/// @notice Constructor Parameters
/// @param prizeToken The token to use for prizes
/// @param twabController The Twab Controller to retrieve time-weighted average balances from
/// @param creator The address that will be permitted to finish prize pool initialization after deployment
/// @param tierLiquidityUtilizationRate The rate at which liquidity is utilized for prize tiers. This allows
/// for deviations in prize claims; if 0.75e18 then it is 75% utilization so it can accommodate 25% deviation
/// in more prize claims.
/// @param drawPeriodSeconds The number of seconds between draws.
/// E.g. a Prize Pool with a daily draw should have a draw period of 86400 seconds.
/// @param firstDrawOpensAt The timestamp at which the first draw will open
/// @param grandPrizePeriodDraws The target number of draws to pass between each grand prize
/// @param numberOfTiers The number of tiers to start with. Must be greater than or equal to the minimum
/// number of tiers
/// @param tierShares The number of shares to allocate to each tier
/// @param canaryShares The number of shares to allocate to each canary tier
/// @param reserveShares The number of shares to allocate to the reserve
/// @param drawTimeout The number of draws that need to be missed before the prize pool shuts down. The timeout
/// resets when a draw is awarded.
struct ConstructorParams {
  IERC20 prizeToken;
  TwabController twabController;
  address creator;
  uint256 tierLiquidityUtilizationRate;
  uint48 drawPeriodSeconds;
  uint48 firstDrawOpensAt;
  uint24 grandPrizePeriodDraws;
  uint8 numberOfTiers;
  uint8 tierShares;
  uint8 canaryShares;
  uint8 reserveShares;
  uint24 drawTimeout;
}

/// @notice A struct to represent a shutdown portion of liquidity for a vault and account
/// @param numerator The numerator of the portion
/// @param denominator The denominator of the portion
struct ShutdownPortion {
  uint256 numerator;
  uint256 denominator;
}

/// @title PoolTogether V5 Prize Pool
/// @author G9 Software Inc. & PoolTogether Inc. Team
/// @notice The Prize Pool holds the prize liquidity and allows vaults to claim prizes.
contract PrizePool is TieredLiquidityDistributor {
  using SafeERC20 for IERC20;
  using DrawAccumulatorLib for DrawAccumulatorLib.Accumulator;

  /* ============ Events ============ */

  /// @notice Emitted when a prize is claimed.
  /// @param vault The address of the vault that claimed the prize.
  /// @param winner The address of the winner
  /// @param recipient The address of the prize recipient
  /// @param drawId The draw ID of the draw that was claimed.
  /// @param tier The prize tier that was claimed.
  /// @param prizeIndex The index of the prize that was claimed
  /// @param payout The amount of prize tokens that were paid out to the winner
  /// @param claimReward The amount of prize tokens that were paid to the claimer
  /// @param claimRewardRecipient The address that the claimReward was sent to
  event ClaimedPrize(
    address indexed vault,
    address indexed winner,
    address indexed recipient,
    uint24 drawId,
    uint8 tier,
    uint32 prizeIndex,
    uint152 payout,
    uint96 claimReward,
    address claimRewardRecipient
  );

  /// @notice Emitted when a draw is awarded.
  /// @param drawId The ID of the draw that was awarded
  /// @param winningRandomNumber The winning random number for the awarded draw
  /// @param lastNumTiers The previous number of prize tiers
  /// @param numTiers The number of prize tiers for the awarded draw
  /// @param reserve The resulting reserve available
  /// @param prizeTokensPerShare The amount of prize tokens per share for the awarded draw
  /// @param drawOpenedAt The start timestamp of the awarded draw
  event DrawAwarded(
    uint24 indexed drawId,
    uint256 winningRandomNumber,
    uint8 lastNumTiers,
    uint8 numTiers,
    uint104 reserve,
    uint128 prizeTokensPerShare,
    uint48 drawOpenedAt
  );

  /// @notice Emitted when any amount of the reserve is rewarded to a recipient.
  /// @param to The recipient of the reward
  /// @param amount The amount of assets rewarded
  event AllocateRewardFromReserve(address indexed to, uint256 amount);

  /// @notice Emitted when the reserve is manually increased.
  /// @param user The user who increased the reserve
  /// @param amount The amount of assets transferred
  event ContributedReserve(address indexed user, uint256 amount);

  /// @notice Emitted when a vault contributes prize tokens to the pool.
  /// @param vault The address of the vault that is contributing tokens
  /// @param drawId The ID of the first draw that the tokens will be contributed to
  /// @param amount The amount of tokens contributed
  event ContributePrizeTokens(address indexed vault, uint24 indexed drawId, uint256 amount);

  /// @notice Emitted when the draw manager is set
  /// @param drawManager The address of the draw manager
  event SetDrawManager(address indexed drawManager);

  /// @notice Emitted when an address withdraws their prize claim rewards.
  /// @param account The account that is withdrawing rewards
  /// @param to The address the rewards are sent to
  /// @param amount The amount withdrawn
  /// @param available The total amount that was available to withdraw before the transfer
  event WithdrawRewards(
    address indexed account,
    address indexed to,
    uint256 amount,
    uint256 available
  );

  /// @notice Emitted when an address receives new prize claim rewards.
  /// @param to The address the rewards are given to
  /// @param amount The amount increased
  event IncreaseClaimRewards(address indexed to, uint256 amount);

  /* ============ State ============ */

  /// @notice The DrawAccumulator that tracks the exponential moving average of the contributions by a vault.
  mapping(address vault => DrawAccumulatorLib.Accumulator accumulator) internal _vaultAccumulator;

  /// @notice Records the claim record for a winner.
  mapping(address vault => mapping(address account => mapping(uint24 drawId => mapping(uint8 tier => mapping(uint32 prizeIndex => bool claimed)))))
    internal _claimedPrizes;

  /// @notice Tracks the total rewards accrued for a claimer or draw completer.
  mapping(address recipient => uint256 rewards) internal _rewards;

  /// @notice The special value for the donator address. Contributions from this address are excluded from the total odds.
  /// @dev 0x000...F2EE because it's free money!
  address public constant DONATOR = 0x000000000000000000000000000000000000F2EE;

  /// @notice The token that is being contributed and awarded as prizes.
  IERC20 public immutable prizeToken;

  /// @notice The Twab Controller to use to retrieve historic balances.
  TwabController public immutable twabController;

  /// @notice The number of seconds between draws.
  uint48 public immutable drawPeriodSeconds;

  /// @notice The timestamp at which the first draw will open.
  uint48 public immutable firstDrawOpensAt;

  /// @notice The maximum number of draws that can be missed before the prize pool is considered inactive.
  uint24 public immutable drawTimeout;

  /// @notice The address that is allowed to set the draw manager
  address immutable creator;

  /// @notice The exponential weighted average of all vault contributions.
  DrawAccumulatorLib.Accumulator internal _totalAccumulator;

  /// @notice The winner random number for the last awarded draw.
  uint256 internal _winningRandomNumber;

  /// @notice The draw manager address.
  address public drawManager;

  /// @notice Tracks reserve that was contributed directly to the reserve. Always increases.
  uint96 internal _directlyContributedReserve;

  /// @notice The number of prize claims for the last awarded draw.
  uint24 public claimCount;

  /// @notice The total amount of prize tokens that have been claimed for all time.
  uint128 internal _totalWithdrawn;

  /// @notice The total amount of rewards that have yet to be claimed
  uint104 internal _totalRewardsToBeClaimed;

  /// @notice The observation at which the shutdown balance was recorded
  Observation shutdownObservation;
  
  /// @notice The balance available to be withdrawn at shutdown
  uint256 shutdownBalance;

  /// @notice The total contributed observation that was used for the last withdrawal for a vault and account
  mapping(address vault => mapping(address account => Observation lastWithdrawalTotalContributedObservation)) internal _withdrawalObservations;

  /// @notice The shutdown portion of liquidity for a vault and account
  mapping(address vault => mapping(address account => ShutdownPortion shutdownPortion)) internal _shutdownPortions;

  /* ============ Constructor ============ */

  /// @notice Constructs a new Prize Pool.
  /// @param params A struct of constructor parameters
  constructor(
    ConstructorParams memory params
  )
    TieredLiquidityDistributor(
      params.tierLiquidityUtilizationRate,
      params.numberOfTiers,
      params.tierShares,
      params.canaryShares,
      params.reserveShares,
      params.grandPrizePeriodDraws
    )
  {
    if (params.drawTimeout == 0) {
      revert DrawTimeoutIsZero();
    }

    if (params.drawTimeout > params.grandPrizePeriodDraws) {
      revert DrawTimeoutGTGrandPrizePeriodDraws();
    }

    if (params.firstDrawOpensAt < block.timestamp) {
      revert FirstDrawOpensInPast();
    }

    if (params.grandPrizePeriodDraws >= MAX_OBSERVATION_CARDINALITY) {
      revert GrandPrizePeriodDrawsTooLarge(params.grandPrizePeriodDraws, MAX_OBSERVATION_CARDINALITY - 1);
    }

    uint48 twabPeriodOffset = params.twabController.PERIOD_OFFSET();
    uint48 twabPeriodLength = params.twabController.PERIOD_LENGTH();

    if (
      params.drawPeriodSeconds < twabPeriodLength ||
      params.drawPeriodSeconds % twabPeriodLength != 0
    ) {
      revert IncompatibleTwabPeriodLength();
    }

    if ((params.firstDrawOpensAt - twabPeriodOffset) % twabPeriodLength != 0) {
      revert IncompatibleTwabPeriodOffset();
    }

    if (params.creator == address(0)) {
      revert CreatorIsZeroAddress();
    }

    creator = params.creator;
    drawTimeout = params.drawTimeout;
    prizeToken = params.prizeToken;
    twabController = params.twabController;
    drawPeriodSeconds = params.drawPeriodSeconds;
    firstDrawOpensAt = params.firstDrawOpensAt;
  }

  /* ============ Modifiers ============ */

  /// @notice Modifier that throws if sender is not the draw manager.
  modifier onlyDrawManager() {
    if (msg.sender != drawManager) {
      revert CallerNotDrawManager(msg.sender, drawManager);
    }
    _;
  }

  /// @notice Sets the Draw Manager contract on the prize pool. Can only be called once by the creator.
  /// @param _drawManager The address of the Draw Manager contract
  function setDrawManager(address _drawManager) external {
    if (msg.sender != creator) {
      revert OnlyCreator();
    }
    if (drawManager != address(0)) {
      revert DrawManagerAlreadySet();
    }
    drawManager = _drawManager;

    emit SetDrawManager(_drawManager);
  }

  /* ============ External Write Functions ============ */

  /// @notice Contributes prize tokens on behalf of the given vault.
  /// @dev The tokens should have already been transferred to the prize pool.
  /// @dev The prize pool balance will be checked to ensure there is at least the given amount to deposit.
  /// @param _prizeVault The address of the vault to contribute to
  /// @param _amount The amount of prize tokens to contribute
  /// @return The amount of available prize tokens prior to the contribution.
  function contributePrizeTokens(address _prizeVault, uint256 _amount) public returns (uint256) {
    uint256 _deltaBalance = prizeToken.balanceOf(address(this)) - accountedBalance();
    if (_deltaBalance < _amount) {
      revert ContributionGTDeltaBalance(_amount, _deltaBalance);
    }
    uint24 openDrawId_ = getOpenDrawId();
    _vaultAccumulator[_prizeVault].add(_amount, openDrawId_);
    _totalAccumulator.add(_amount, openDrawId_);
    emit ContributePrizeTokens(_prizeVault, openDrawId_, _amount);
    return _deltaBalance;
  }

  /// @notice Allows a user to donate prize tokens to the prize pool.
  /// @param _amount The amount of tokens to donate. The amount should already be approved for transfer.
  function donatePrizeTokens(uint256 _amount) external {
    prizeToken.safeTransferFrom(msg.sender, address(this), _amount);
    contributePrizeTokens(DONATOR, _amount);
  }

  /// @notice Allows the Manager to allocate a reward from the reserve to a recipient.
  /// @param _to The address to allocate the rewards to
  /// @param _amount The amount of tokens for the reward
  function allocateRewardFromReserve(address _to, uint96 _amount) external onlyDrawManager notShutdown {
    if (_to == address(0)) {
      revert RewardRecipientZeroAddress();
    }
    if (_amount > _reserve) {
      revert InsufficientReserve(_amount, _reserve);
    }

    unchecked {
      _reserve -= _amount;
    }

    _rewards[_to] += _amount;
    _totalRewardsToBeClaimed = SafeCast.toUint104(_totalRewardsToBeClaimed + _amount);
    emit AllocateRewardFromReserve(_to, _amount);
  }

  /// @notice Allows the Manager to award a draw with the winning random number.
  /// @dev Updates the number of tiers, the winning random number and the prize pool reserve.
  /// @param winningRandomNumber_ The winning random number for the draw
  /// @return The ID of the awarded draw
  function awardDraw(uint256 winningRandomNumber_) external onlyDrawManager notShutdown returns (uint24) {
    // check winning random number
    if (winningRandomNumber_ == 0) {
      revert RandomNumberIsZero();
    }
    uint24 awardingDrawId = getDrawIdToAward();
    uint48 awardingDrawOpenedAt = drawOpensAt(awardingDrawId);
    uint48 awardingDrawClosedAt = awardingDrawOpenedAt + drawPeriodSeconds;
    if (block.timestamp < awardingDrawClosedAt) {
      revert AwardingDrawNotClosed(awardingDrawClosedAt);
    }

    uint24 lastAwardedDrawId_ = _lastAwardedDrawId;
    uint32 _claimCount = claimCount;
    uint8 _numTiers = numberOfTiers;
    uint8 _nextNumberOfTiers = _numTiers;

    _nextNumberOfTiers = computeNextNumberOfTiers(_claimCount);

    // If any draws were skipped from the last awarded draw to the one we are awarding, the contribution
    // from those skipped draws will be included in the new distributions.
    _awardDraw(
      awardingDrawId,
      _nextNumberOfTiers,
      getTotalContributedBetween(lastAwardedDrawId_ + 1, awardingDrawId)
    );

    _winningRandomNumber = winningRandomNumber_;
    if (_claimCount != 0) {
      claimCount = 0;
    }

    emit DrawAwarded(
      awardingDrawId,
      winningRandomNumber_,
      _numTiers,
      _nextNumberOfTiers,
      _reserve,
      prizeTokenPerShare,
      awardingDrawOpenedAt
    );

    return awardingDrawId;
  }

  /// @notice Claims a prize for a given winner and tier.
  /// @dev This function takes in an address _winner, a uint8 _tier, a uint96 _claimReward, and an
  /// address _claimRewardRecipient. It checks if _winner is actually the winner of the _tier for the calling vault.
  /// If so, it calculates the prize size and transfers it to the winner. If not, it reverts with an error message.
  /// The function then checks the claim record of _winner to see if they have already claimed the prize for the
  /// awarded draw. If not, it updates the claim record with the claimed tier and emits a ClaimedPrize event with
  /// information about the claim.
  /// Note that this function can modify the state of the contract by updating the claim record, changing the largest
  /// tier claimed and the claim count, and transferring prize tokens. The function is marked as external which
  /// means that it can be called from outside the contract.
  /// @param _winner The address of the eligible winner
  /// @param _tier The tier of the prize to be claimed.
  /// @param _prizeIndex The prize to claim for the winner. Must be less than the prize count for the tier.
  /// @param _prizeRecipient The recipient of the prize
  /// @param _claimReward The claimReward associated with claiming the prize.
  /// @param _claimRewardRecipient The address to receive the claimReward.
  /// @return Total prize amount claimed (payout and claimRewards combined).
  function claimPrize(
    address _winner,
    uint8 _tier,
    uint32 _prizeIndex,
    address _prizeRecipient,
    uint96 _claimReward,
    address _claimRewardRecipient
  ) external returns (uint256) {
    /// @dev Claims cannot occur after a draw has been finalized (1 period after a draw closes). This prevents
    /// the reserve from changing while the following draw is being awarded.
    uint24 lastAwardedDrawId_ = _lastAwardedDrawId;
    if (isDrawFinalized(lastAwardedDrawId_)) {
      revert ClaimPeriodExpired();
    }
    if (_claimRewardRecipient == address(0) && _claimReward > 0) {
      revert RewardRecipientZeroAddress();
    }

    uint8 _numTiers = numberOfTiers;

    Tier memory tierLiquidity = _getTier(_tier, _numTiers);

    if (_claimReward > tierLiquidity.prizeSize) {
      revert RewardTooLarge(_claimReward, tierLiquidity.prizeSize);
    }

    if (tierLiquidity.prizeSize == 0) {
      revert PrizeIsZero();
    }

    if (!isWinner(msg.sender, _winner, _tier, _prizeIndex)) {
      revert DidNotWin(msg.sender, _winner, _tier, _prizeIndex);
    }

    if (_claimedPrizes[msg.sender][_winner][lastAwardedDrawId_][_tier][_prizeIndex]) {
      revert AlreadyClaimed(msg.sender, _winner, _tier, _prizeIndex);
    }

    _claimedPrizes[msg.sender][_winner][lastAwardedDrawId_][_tier][_prizeIndex] = true;

    _consumeLiquidity(tierLiquidity, _tier, tierLiquidity.prizeSize);

    // `amount` is the payout amount
    uint256 amount;
    if (_claimReward != 0) {
      emit IncreaseClaimRewards(_claimRewardRecipient, _claimReward);
      _rewards[_claimRewardRecipient] += _claimReward;

      unchecked {
        amount = tierLiquidity.prizeSize - _claimReward;
      }
    } else {
      amount = tierLiquidity.prizeSize;
    }

    // co-locate to save gas
    claimCount++;
    _totalWithdrawn = SafeCast.toUint128(_totalWithdrawn + amount);
    _totalRewardsToBeClaimed = SafeCast.toUint104(_totalRewardsToBeClaimed + _claimReward);

    emit ClaimedPrize(
      msg.sender,
      _winner,
      _prizeRecipient,
      lastAwardedDrawId_,
      _tier,
      _prizeIndex,
      uint152(amount),
      _claimReward,
      _claimRewardRecipient
    );

    if (amount > 0) {
      prizeToken.safeTransfer(_prizeRecipient, amount);
    }

    return tierLiquidity.prizeSize;
  }

  /// @notice Withdraws earned rewards for the caller.
  /// @param _to The address to transfer the rewards to
  /// @param _amount The amount of rewards to withdraw
  function withdrawRewards(address _to, uint256 _amount) external {
    uint256 _available = _rewards[msg.sender];

    if (_amount > _available) {
      revert InsufficientRewardsError(_amount, _available);
    }

    unchecked {
      _rewards[msg.sender] = _available - _amount;
    }

    _totalWithdrawn = SafeCast.toUint128(_totalWithdrawn + _amount);
    _totalRewardsToBeClaimed = SafeCast.toUint104(_totalRewardsToBeClaimed - _amount);

    // skip transfer if recipient is the prize pool (tokens stay in this contract)
    if (_to != address(this)) {
      prizeToken.safeTransfer(_to, _amount);
    }

    emit WithdrawRewards(msg.sender, _to, _amount, _available);
  }

  /// @notice Allows anyone to deposit directly into the Prize Pool reserve.
  /// @dev Ensure caller has sufficient balance and has approved the Prize Pool to transfer the tokens
  /// @param _amount The amount of tokens to increase the reserve by
  function contributeReserve(uint96 _amount) external notShutdown {
    _reserve += _amount;
    _directlyContributedReserve += _amount;
    prizeToken.safeTransferFrom(msg.sender, address(this), _amount);
    emit ContributedReserve(msg.sender, _amount);
  }

  /* ============ External Read Functions ============ */

  /// @notice Returns the winning random number for the last awarded draw.
  /// @return The winning random number
  function getWinningRandomNumber() external view returns (uint256) {
    return _winningRandomNumber;
  }

  /// @notice Returns the last awarded draw id.
  /// @return The last awarded draw id
  function getLastAwardedDrawId() external view returns (uint24) {
    return _lastAwardedDrawId;
  }

  /// @notice Returns the total prize tokens contributed by a particular vault between the given draw ids, inclusive.
  /// @param _vault The address of the vault
  /// @param _startDrawIdInclusive Start draw id inclusive
  /// @param _endDrawIdInclusive End draw id inclusive
  /// @return The total prize tokens contributed by the given vault
  function getContributedBetween(
    address _vault,
    uint24 _startDrawIdInclusive,
    uint24 _endDrawIdInclusive
  ) external view returns (uint256) {
    return
      _vaultAccumulator[_vault].getDisbursedBetween(
        _startDrawIdInclusive,
        _endDrawIdInclusive
      );
  }

  /// @notice Returns the total prize tokens donated to the prize pool
  /// @param _startDrawIdInclusive Start draw id inclusive
  /// @param _endDrawIdInclusive End draw id inclusive
  /// @return The total prize tokens donated to the prize pool
  function getDonatedBetween(
    uint24 _startDrawIdInclusive,
    uint24 _endDrawIdInclusive
  ) external view returns (uint256) {
    return
      _vaultAccumulator[DONATOR].getDisbursedBetween(
        _startDrawIdInclusive,
        _endDrawIdInclusive
      );
  }

  /// @notice Returns the newest observation for the total accumulator
  /// @return The newest observation
  function getTotalAccumulatorNewestObservation() external view returns (Observation memory) {
    return _totalAccumulator.newestObservation();
  }

  /// @notice Returns the newest observation for the specified vault accumulator
  /// @param _vault The vault to check
  /// @return The newest observation for the vault
  function getVaultAccumulatorNewestObservation(address _vault) external view returns (Observation memory) {
    return _vaultAccumulator[_vault].newestObservation();
  }

  /// @notice Computes the expected duration prize accrual for a tier.
  /// @param _tier The tier to check
  /// @return The number of draws
  function getTierAccrualDurationInDraws(uint8 _tier) external view returns (uint24) {
    return
      uint24(TierCalculationLib.estimatePrizeFrequencyInDraws(getTierOdds(_tier, numberOfTiers)));
  }

  /// @notice The total amount of prize tokens that have been withdrawn as fees or prizes
  /// @return The total amount of prize tokens that have been withdrawn as fees or prizes
  function totalWithdrawn() external view returns (uint256) {
    return _totalWithdrawn;
  }

  /// @notice Returns the amount of tokens that will be added to the reserve when next draw to award is awarded.
  /// @dev Intended for Draw manager to use after a draw has closed but not yet been awarded.
  /// @return The amount of prize tokens that will be added to the reserve
  function pendingReserveContributions() external view returns (uint256) {
    uint8 _numTiers = numberOfTiers;
    uint24 lastAwardedDrawId_ = _lastAwardedDrawId;

    (uint104 newReserve, ) = _computeNewDistributions(
      _numTiers,
      lastAwardedDrawId_ == 0 ? _numTiers : computeNextNumberOfTiers(claimCount),
      prizeTokenPerShare,
      getTotalContributedBetween(lastAwardedDrawId_ + 1, getDrawIdToAward())
    );

    return newReserve;
  }

  /// @notice Returns whether the winner has claimed the tier for the last awarded draw
  /// @param _vault The vault to check
  /// @param _winner The account to check
  /// @param _tier The tier to check
  /// @param _prizeIndex The prize index to check
  /// @return True if the winner claimed the tier for the last awarded draw, false otherwise.
  function wasClaimed(
    address _vault,
    address _winner,
    uint8 _tier,
    uint32 _prizeIndex
  ) external view returns (bool) {
    return _claimedPrizes[_vault][_winner][_lastAwardedDrawId][_tier][_prizeIndex];
  }

  /// @notice Returns whether the winner has claimed the tier for the specified draw
  /// @param _vault The vault to check
  /// @param _winner The account to check
  /// @param _drawId The draw ID to check
  /// @param _tier The tier to check
  /// @param _prizeIndex The prize index to check
  /// @return True if the winner claimed the tier for the specified draw, false otherwise.
  function wasClaimed(
    address _vault,
    address _winner,
    uint24 _drawId,
    uint8 _tier,
    uint32 _prizeIndex
  ) external view returns (bool) {
    return _claimedPrizes[_vault][_winner][_drawId][_tier][_prizeIndex];
  }

  /// @notice Returns the balance of rewards earned for the given address.
  /// @param _recipient The recipient to retrieve the reward balance for
  /// @return The balance of rewards for the given recipient
  function rewardBalance(address _recipient) external view returns (uint256) {
    return _rewards[_recipient];
  }

  /// @notice Computes and returns the next number of tiers based on the current prize claim counts. This number may change throughout the draw
  /// @return The next number of tiers
  function estimateNextNumberOfTiers() external view returns (uint8) {
    return computeNextNumberOfTiers(claimCount);
  }

  /* ============ Internal Functions ============ */

  /// @notice Computes how many tokens have been accounted for
  /// @return The balance of tokens that have been accounted for
  function accountedBalance() public view returns (uint256) {
    return _accountedBalance(_totalAccumulator.newestObservation());
  }

  /// @notice Returns the balance available at the time of shutdown, less rewards to be claimed.
  /// @dev This function will compute and store the current balance if it has not yet been set.
  /// @return balance The balance that is available for depositors to withdraw
  /// @return observation The observation used to compute the balance
  function getShutdownInfo() public returns (uint256 balance, Observation memory observation) {
    if (!isShutdown()) {
      return (balance, observation);
    }
    // if not initialized
    if (shutdownObservation.disbursed + shutdownObservation.available == 0) {
      observation = _totalAccumulator.newestObservation();
      shutdownObservation = observation;
      balance = _accountedBalance(observation) - _totalRewardsToBeClaimed;
      shutdownBalance = balance;
    } else {
      observation = shutdownObservation;
      balance = shutdownBalance;
    }
  }

  /// @notice Returns the open draw ID based on the current block timestamp.
  /// @dev Returns `1` if the first draw hasn't opened yet. This prevents any contributions from
  /// going to the inaccessible draw zero.
  /// @dev First draw has an ID of `1`. This means that if `_lastAwardedDrawId` is zero,
  /// we know that no draws have been awarded yet.
  /// @dev Capped at the shutdown draw ID if the prize pool has shutdown.
  /// @return The ID of the draw period that the current block is in
  function getOpenDrawId() public view returns (uint24) {
    uint24 shutdownDrawId = getShutdownDrawId();
    uint24 openDrawId = getDrawId(block.timestamp);
    return openDrawId > shutdownDrawId ? shutdownDrawId : openDrawId;
  }

  /// @notice Returns the open draw id for the given timestamp
  /// @param _timestamp The timestamp to get the draw id for
  /// @return The ID of the open draw that the timestamp is in
  function getDrawId(uint256 _timestamp) public view returns (uint24) {
    uint48 _firstDrawOpensAt = firstDrawOpensAt;
    return
      (_timestamp < _firstDrawOpensAt)
        ? 1
        : (uint24((_timestamp - _firstDrawOpensAt) / drawPeriodSeconds) + 1);
  }

  /// @notice Returns the next draw ID that can be awarded.
  /// @dev It's possible for draws to be missed, so the next draw ID to award
  /// may be more than one draw ahead of the last awarded draw ID.
  /// @return The next draw ID that can be awarded
  function getDrawIdToAward() public view returns (uint24) {
    uint24 openDrawId_ = getOpenDrawId();
    return (openDrawId_ - _lastAwardedDrawId) > 1 ? openDrawId_ - 1 : openDrawId_;
  }

  /// @notice Returns the time at which a draw opens / opened at.
  /// @param drawId The draw to get the timestamp for
  /// @return The start time of the draw in seconds
  function drawOpensAt(uint24 drawId) public view returns (uint48) {
    return firstDrawOpensAt + (drawId - 1) * drawPeriodSeconds;
  }

  /// @notice Returns the time at which a draw closes / closed at.
  /// @param drawId The draw to get the timestamp for
  /// @return The end time of the draw in seconds
  function drawClosesAt(uint24 drawId) public view returns (uint48) {
    return firstDrawOpensAt + drawId * drawPeriodSeconds;
  }

  /// @notice Checks if the given draw is finalized.
  /// @param drawId The draw to check
  /// @return True if the draw is finalized, false otherwise
  function isDrawFinalized(uint24 drawId) public view returns (bool) {
    return block.timestamp >= drawClosesAt(drawId + 1);
  }

  /// @notice Calculates the number of tiers given the number of prize claims
  /// @dev This function will use the claim count to determine the number of tiers, then add one for the canary tier.
  /// @param _claimCount The number of prize claims
  /// @return The estimated number of tiers + the canary tier
  function computeNextNumberOfTiers(uint32 _claimCount) public view returns (uint8) {
    if (_lastAwardedDrawId != 0) {
      // claimCount is expected to be the estimated number of claims for the current prize tier.
      uint8 nextNumberOfTiers = _estimateNumberOfTiersUsingPrizeCountPerDraw(_claimCount);
      // limit change to 1 tier
      uint8 _numTiers = numberOfTiers;
      if (nextNumberOfTiers > _numTiers) {
        nextNumberOfTiers = _numTiers + 1;
      } else if (nextNumberOfTiers < _numTiers) {
        nextNumberOfTiers = _numTiers - 1;
      }
      return nextNumberOfTiers;
    } else {
      return numberOfTiers;
    }
  }

  /// @notice Returns the given account and vault's portion of the shutdown balance.
  /// @param _vault The vault whose contributions are measured
  /// @param _account The account whose vault twab is measured
  /// @return The portion of the shutdown balance that the account is entitled to.
  function computeShutdownPortion(address _vault, address _account) public view returns (ShutdownPortion memory) {
    uint24 drawIdPriorToShutdown = getShutdownDrawId() - 1;
    uint24 startDrawIdInclusive = computeRangeStartDrawIdInclusive(drawIdPriorToShutdown, grandPrizePeriodDraws);

    (uint256 vaultContrib, uint256 totalContrib) = _getVaultShares(
      _vault,
      startDrawIdInclusive,
      drawIdPriorToShutdown
    );

    (uint256 _userTwab, uint256 _vaultTwabTotalSupply) = getVaultUserBalanceAndTotalSupplyTwab(
      _vault,
      _account,
      startDrawIdInclusive,
      drawIdPriorToShutdown
    );

    if (_vaultTwabTotalSupply == 0) {
      return ShutdownPortion(0, 0);
    }

    return ShutdownPortion(vaultContrib * _userTwab, totalContrib * _vaultTwabTotalSupply);
  }

  /// @notice Returns the shutdown balance for a given vault and account. The prize pool must already be shutdown.
  /// @dev The shutdown balance is the amount of prize tokens that a user can claim after the prize pool has been shutdown.
  /// @dev The shutdown balance is calculated using the user's TWAB and the total supply TWAB, whose time ranges are the
  /// grand prize period prior to the shutdown timestamp.
  /// @param _vault The vault to check
  /// @param _account The account to check
  /// @return The shutdown balance for the given vault and account
  function shutdownBalanceOf(address _vault, address _account) public returns (uint256) {
    if (!isShutdown()) {
      return 0;
    }

    Observation memory withdrawalObservation = _withdrawalObservations[_vault][_account];
    ShutdownPortion memory shutdownPortion;
    uint256 balance;

    // if we haven't withdrawn yet, add the portion of the shutdown balance
    if ((withdrawalObservation.available + withdrawalObservation.disbursed) == 0) {
      (balance, withdrawalObservation) = getShutdownInfo();
      shutdownPortion = computeShutdownPortion(_vault, _account);
      _shutdownPortions[_vault][_account] = shutdownPortion;
    } else {
      shutdownPortion = _shutdownPortions[_vault][_account];
    }

    if (shutdownPortion.denominator == 0) {
      return 0;
    }

    // if there are new rewards
    // current "draw id to award" observation - last withdraw observation
    Observation memory newestObs = _totalAccumulator.newestObservation();
    balance += (newestObs.available + newestObs.disbursed) - (withdrawalObservation.available + withdrawalObservation.disbursed);

    return (shutdownPortion.numerator * balance) / shutdownPortion.denominator;
  }

  /// @notice Withdraws the shutdown balance for a given vault and sender
  /// @param _vault The eligible vault to withdraw the shutdown balance from
  /// @param _recipient The address to send the shutdown balance to
  /// @return The amount of prize tokens withdrawn
  function withdrawShutdownBalance(address _vault, address _recipient) external returns (uint256) {
    if (!isShutdown()) {
      revert PrizePoolNotShutdown();
    }
    uint256 balance = shutdownBalanceOf(_vault, msg.sender);
    _withdrawalObservations[_vault][msg.sender] = _totalAccumulator.newestObservation();
    if (balance > 0) {
      prizeToken.safeTransfer(_recipient, balance);
      _totalWithdrawn += uint128(balance);
    }
    return balance;
  }

  /// @notice Returns the open draw ID at the time of shutdown.
  /// @return The draw id
  function getShutdownDrawId() public view returns (uint24) {
    return getDrawId(shutdownAt());
  }

  /// @notice Returns the timestamp at which the prize pool will be considered inactive and shutdown
  /// @return The timestamp at which the prize pool will be considered inactive
  function shutdownAt() public view returns (uint256) {
    uint256 twabShutdownAt = twabController.lastObservationAt();
    uint256 drawTimeoutAt_ = drawTimeoutAt();
    return drawTimeoutAt_ < twabShutdownAt ? drawTimeoutAt_ : twabShutdownAt;
  }

  /// @notice Returns whether the prize pool has been shutdown
  /// @return True if shutdown, false otherwise
  function isShutdown() public view returns (bool) {
    return block.timestamp >= shutdownAt();
  }

  /// @notice Returns the timestamp at which the prize pool will be considered inactive
  /// @return The timestamp at which the prize pool has timed out and becomes inactive
  function drawTimeoutAt() public view returns (uint256) { 
    return drawClosesAt(_lastAwardedDrawId + drawTimeout);
  }

  /// @notice Returns the total prize tokens contributed between the given draw ids, inclusive.
  /// @param _startDrawIdInclusive Start draw id inclusive
  /// @param _endDrawIdInclusive End draw id inclusive
  /// @return The total prize tokens contributed by all vaults
  function getTotalContributedBetween(
    uint24 _startDrawIdInclusive,
    uint24 _endDrawIdInclusive
  ) public view returns (uint256) {
    return
      _totalAccumulator.getDisbursedBetween(
        _startDrawIdInclusive,
        _endDrawIdInclusive
      );
  }

  /// @notice Checks if the given user has won the prize for the specified tier in the given vault.
  /// @param _vault The address of the vault to check
  /// @param _user The address of the user to check for the prize
  /// @param _tier The tier for which the prize is to be checked
  /// @param _prizeIndex The prize index to check. Must be less than prize count for the tier
  /// @return A boolean value indicating whether the user has won the prize or not
  function isWinner(
    address _vault,
    address _user,
    uint8 _tier,
    uint32 _prizeIndex
  ) public view returns (bool) {
    uint24 lastAwardedDrawId_ = _lastAwardedDrawId;

    if (lastAwardedDrawId_ == 0) {
      revert NoDrawsAwarded();
    }
    if (_tier >= numberOfTiers) {
      revert InvalidTier(_tier, numberOfTiers);
    }

    SD59x18 tierOdds = getTierOdds(_tier, numberOfTiers);
    uint24 startDrawIdInclusive = computeRangeStartDrawIdInclusive(lastAwardedDrawId_, uint24(TierCalculationLib.estimatePrizeFrequencyInDraws(tierOdds)));

    uint32 tierPrizeCount = uint32(TierCalculationLib.prizeCount(_tier));

    if (_prizeIndex >= tierPrizeCount) {
      revert InvalidPrizeIndex(_prizeIndex, tierPrizeCount, _tier);
    }

    uint256 userSpecificRandomNumber = TierCalculationLib.calculatePseudoRandomNumber(
      lastAwardedDrawId_,
      _vault,
      _user,
      _tier,
      _prizeIndex,
      _winningRandomNumber
    );
    
    SD59x18 vaultPortion = getVaultPortion(
      _vault,
      startDrawIdInclusive,
      lastAwardedDrawId_
    );

    (uint256 _userTwab, uint256 _vaultTwabTotalSupply) = getVaultUserBalanceAndTotalSupplyTwab(
      _vault,
      _user,
      startDrawIdInclusive,
      lastAwardedDrawId_
    );

    return
      TierCalculationLib.isWinner(
        userSpecificRandomNumber,
        _userTwab,
        _vaultTwabTotalSupply,
        vaultPortion,
        tierOdds
      );
  }

  /// @notice Compute the start draw id for a range given the end draw id and range size
  /// @param _endDrawIdInclusive The end draw id (inclusive) of the range
  /// @param _rangeSize The size of the range
  /// @return The start draw id (inclusive) of the range
  function computeRangeStartDrawIdInclusive(uint24 _endDrawIdInclusive, uint24 _rangeSize) public pure returns (uint24) {
    if (_rangeSize != 0) {
      return _rangeSize > _endDrawIdInclusive ? 1 : _endDrawIdInclusive - _rangeSize + 1;
    } else {
      revert RangeSizeZero();
    }
  }

  /// @notice Returns the time-weighted average balance (TWAB) and the TWAB total supply for the specified user in
  /// the given vault over a specified period.
  /// @dev This function calculates the TWAB for a user by calling the getTwabBetween function of the TWAB controller
  /// for a specified period of time.
  /// @param _vault The address of the vault for which to get the TWAB.
  /// @param _user The address of the user for which to get the TWAB.
  /// @param _startDrawIdInclusive The starting draw for the range (inclusive)
  /// @param _endDrawIdInclusive The end draw for the range (inclusive)
  /// @return twab The TWAB for the specified user in the given vault over the specified period.
  /// @return twabTotalSupply The TWAB total supply over the specified period.
  function getVaultUserBalanceAndTotalSupplyTwab(
    address _vault,
    address _user,
    uint24 _startDrawIdInclusive,
    uint24 _endDrawIdInclusive
  ) public view returns (uint256 twab, uint256 twabTotalSupply) {
    uint48 _startTimestamp = drawOpensAt(_startDrawIdInclusive);
    uint48 _endTimestamp = drawClosesAt(_endDrawIdInclusive);
    twab = twabController.getTwabBetween(_vault, _user, _startTimestamp, _endTimestamp);
    twabTotalSupply = twabController.getTotalSupplyTwabBetween(
      _vault,
      _startTimestamp,
      _endTimestamp
    );
  }

  /// @notice Calculates the portion of the vault's contribution to the prize pool over a specified duration in draws.
  /// @param _vault The address of the vault for which to calculate the portion.
  /// @param _startDrawIdInclusive The starting draw ID (inclusive) of the draw range to calculate the contribution portion for.
  /// @param _endDrawIdInclusive The ending draw ID (inclusive) of the draw range to calculate the contribution portion for.
  /// @return The portion of the vault's contribution to the prize pool over the specified duration in draws.
  function getVaultPortion(
    address _vault,
    uint24 _startDrawIdInclusive,
    uint24 _endDrawIdInclusive
  ) public view returns (SD59x18) {
    if (_vault == DONATOR) {
      return sd(0);
    }

    (uint256 vaultContributed, uint256 totalContributed) = _getVaultShares(_vault, _startDrawIdInclusive, _endDrawIdInclusive);

    if (totalContributed == 0) {
      return sd(0);
    }

    return sd(
      SafeCast.toInt256(
        vaultContributed
      )
    ).div(sd(SafeCast.toInt256(totalContributed)));
  }

  function _getVaultShares(
    address _vault,
    uint24 _startDrawIdInclusive,
    uint24 _endDrawIdInclusive
  ) internal view returns (uint256 shares, uint256 totalSupply) {
    uint256 totalContributed = _totalAccumulator.getDisbursedBetween(
      _startDrawIdInclusive,
      _endDrawIdInclusive
    );

    uint256 totalDonated = _vaultAccumulator[DONATOR].getDisbursedBetween(_startDrawIdInclusive, _endDrawIdInclusive);

    totalSupply = totalContributed - totalDonated;

    shares = _vaultAccumulator[_vault].getDisbursedBetween(
      _startDrawIdInclusive,
      _endDrawIdInclusive
    );
  }

  function _accountedBalance(Observation memory _observation) internal view returns (uint256) {
    // obs.disbursed includes the reserve, prizes, and prize liquidity
    // obs.disbursed is the total amount of tokens all-time contributed by vaults and released. These tokens may:
    //    - still be held for future prizes
    //    - have been given as prizes
    //    - have been captured as fees

    // obs.available is the total number of tokens that WILL be disbursed in the future.
    // _directlyContributedReserve are tokens that have been contributed directly to the reserve
    // totalWithdrawn represents all tokens that have been withdrawn as prizes or rewards

    return (_observation.available + _observation.disbursed) + uint256(_directlyContributedReserve) - uint256(_totalWithdrawn);
  }

  /// @notice Modifier that requires the prize pool not to be shutdown
  modifier notShutdown() {
    if (isShutdown()) {
      revert PrizePoolShutdown();
    }
    _;
  }
}