OnChain Punks - Arbitrum

// File: @openzeppelin/contracts/utils/Base64.sol


// OpenZeppelin Contracts (last updated v4.7.0) (utils/Base64.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides a set of functions to operate with Base64 strings.
 *
 * _Available since v4.5._
 */
library Base64 {
    /**
     * @dev Base64 Encoding/Decoding Table
     */
    string internal constant _TABLE = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";

    /**
     * @dev Converts a `bytes` to its Bytes64 `string` representation.
     */
    function encode(bytes memory data) internal pure returns (string memory) {
        /**
         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence
         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol
         */
        if (data.length == 0) return "";

        // Loads the table into memory
        string memory table = _TABLE;

        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter
        // and split into 4 numbers of 6 bits.
        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up
        // - `data.length + 2`  -> Round up
        // - `/ 3`              -> Number of 3-bytes chunks
        // - `4 *`              -> 4 characters for each chunk
        string memory result = new string(4 * ((data.length + 2) / 3));

        /// @solidity memory-safe-assembly
        assembly {
            // Prepare the lookup table (skip the first "length" byte)
            let tablePtr := add(table, 1)

            // Prepare result pointer, jump over length
            let resultPtr := add(result, 32)

            // Run over the input, 3 bytes at a time
            for {
                let dataPtr := data
                let endPtr := add(data, mload(data))
            } lt(dataPtr, endPtr) {

            } {
                // Advance 3 bytes
                dataPtr := add(dataPtr, 3)
                let input := mload(dataPtr)

                // To write each character, shift the 3 bytes (18 bits) chunk
                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)
                // and apply logical AND with 0x3F which is the number of
                // the previous character in the ASCII table prior to the Base64 Table
                // The result is then added to the table to get the character to write,
                // and finally write it in the result pointer but with a left shift
                // of 256 (1 byte) - 8 (1 ASCII char) = 248 bits

                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))
                resultPtr := add(resultPtr, 1) // Advance

                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))
                resultPtr := add(resultPtr, 1) // Advance

                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))
                resultPtr := add(resultPtr, 1) // Advance

                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))
                resultPtr := add(resultPtr, 1) // Advance
            }

            // When data `bytes` is not exactly 3 bytes long
            // it is padded with `=` characters at the end
            switch mod(mload(data), 3)
            case 1 {
                mstore8(sub(resultPtr, 1), 0x3d)
                mstore8(sub(resultPtr, 2), 0x3d)
            }
            case 2 {
                mstore8(sub(resultPtr, 1), 0x3d)
            }
        }

        return result;
    }
}

// File: Extra/StringUtils.sol


pragma solidity ^0.8.0;

/**
 * Strings Library
 * 
 * In summary this is a simple library of string functions which make simple 
 * string operations less tedious in solidity.
 * 
 * Please be aware these functions can be quite gas heavy so use them only when
 * necessary not to clog the blockchain with expensive transactions.
 * 
 * @author James Lockhart <james@n3tw0rk.co.uk>
 */
library StringUtils {

    /**
     * Concat (High gas cost)
     * 
     * Appends two strings together and returns a new value
     * 
     * @param _base When being used for a data type this is the extended object
     *              otherwise this is the string which will be the concatenated
     *              prefix
     * @param _value The value to be the concatenated suffix
     * @return string The resulting string from combinging the base and value
     */
    function concat(string memory _base, string memory _value)
        internal
        pure
        returns (string memory) {
        bytes memory _baseBytes = bytes(_base);
        bytes memory _valueBytes = bytes(_value);

        assert(_valueBytes.length > 0);

        string memory _tmpValue = new string(_baseBytes.length +
            _valueBytes.length);
        bytes memory _newValue = bytes(_tmpValue);

        uint i;
        uint j;

        for (i = 0; i < _baseBytes.length; i++) {
            _newValue[j++] = _baseBytes[i];
        }

        for (i = 0; i < _valueBytes.length; i++) {
            _newValue[j++] = _valueBytes[i];
        }

        return string(_newValue);
    }

    /**
     * Index Of
     *
     * Locates and returns the position of a character within a string
     * 
     * @param _base When being used for a data type this is the extended object
     *              otherwise this is the string acting as the haystack to be
     *              searched
     * @param _value The needle to search for, at present this is currently
     *               limited to one character
     * @return int The position of the needle starting from 0 and returning -1
     *             in the case of no matches found
     */
    function indexOf(string memory _base, string memory _value)
        internal
        pure
        returns (int) {
        return _indexOf(_base, _value, 0);
    }

    /**
     * Index Of
     *
     * Locates and returns the position of a character within a string starting
     * from a defined offset
     * 
     * @param _base When being used for a data type this is the extended object
     *              otherwise this is the string acting as the haystack to be
     *              searched
     * @param _value The needle to search for, at present this is currently
     *               limited to one character
     * @param _offset The starting point to start searching from which can start
     *                from 0, but must not exceed the length of the string
     * @return int The position of the needle starting from 0 and returning -1
     *             in the case of no matches found
     */
    function _indexOf(string memory _base, string memory _value, uint _offset)
        internal
        pure
        returns (int) {
        bytes memory _baseBytes = bytes(_base);
        bytes memory _valueBytes = bytes(_value);

        assert(_valueBytes.length == 1);

        for (uint i = _offset; i < _baseBytes.length; i++) {
            if (_baseBytes[i] == _valueBytes[0]) {
                return int(i);
            }
        }

        return -1;
    }

    /**
     * Length
     * 
     * Returns the length of the specified string
     * 
     * @param _base When being used for a data type this is the extended object
     *              otherwise this is the string to be measured
     * @return uint The length of the passed string
     */
    function length(string memory _base)
        internal
        pure
        returns (uint) {
        bytes memory _baseBytes = bytes(_base);
        return _baseBytes.length;
    }

    /**
     * Sub String
     * 
     * Extracts the beginning part of a string based on the desired length
     * 
     * @param _base When being used for a data type this is the extended object
     *              otherwise this is the string that will be used for 
     *              extracting the sub string from
     * @param _length The length of the sub string to be extracted from the base
     * @return string The extracted sub string
     */
    function substring(string memory _base, int _length)
        internal
        pure
        returns (string memory) {
        return _substring(_base, _length, 0);
    }

    /**
     * Sub String
     * 
     * Extracts the part of a string based on the desired length and offset. The
     * offset and length must not exceed the lenth of the base string.
     * 
     * @param _base When being used for a data type this is the extended object
     *              otherwise this is the string that will be used for 
     *              extracting the sub string from
     * @param _length The length of the sub string to be extracted from the base
     * @param _offset The starting point to extract the sub string from
     * @return string The extracted sub string
     */
    function _substring(string memory _base, int _length, int _offset)
        internal
        pure
        returns (string memory) {
        bytes memory _baseBytes = bytes(_base);

        assert(uint(_offset + _length) <= _baseBytes.length);

        string memory _tmp = new string(uint(_length));
        bytes memory _tmpBytes = bytes(_tmp);

        uint j = 0;
        for (uint i = uint(_offset); i < uint(_offset + _length); i++) {
            _tmpBytes[j++] = _baseBytes[i];
        }

        return string(_tmpBytes);
    }


    function split(string memory _base, string memory _value)
        internal
        pure
        returns (string[] memory splitArr) {
        bytes memory _baseBytes = bytes(_base);

        uint _offset = 0;
        uint _splitsCount = 1;
        while (_offset < _baseBytes.length - 1) {
            int _limit = _indexOf(_base, _value, _offset);
            if (_limit == -1)
                break;
            else {
                _splitsCount++;
                _offset = uint(_limit) + 1;
            }
        }

        splitArr = new string[](_splitsCount);

        _offset = 0;
        _splitsCount = 0;
        while (_offset < _baseBytes.length - 1) {

            int _limit = _indexOf(_base, _value, _offset);
            if (_limit == - 1) {
                _limit = int(_baseBytes.length);
            }

            string memory _tmp = new string(uint(_limit) - _offset);
            bytes memory _tmpBytes = bytes(_tmp);

            uint j = 0;
            for (uint i = _offset; i < uint(_limit); i++) {
                _tmpBytes[j++] = _baseBytes[i];
            }
            _offset = uint(_limit) + 1;
            splitArr[_splitsCount++] = string(_tmpBytes);
        }
        return splitArr;
    }

    /**
     * Compare To
     * 
     * Compares the characters of two strings, to ensure that they have an 
     * identical footprint
     * 
     * @param _base When being used for a data type this is the extended object
     *               otherwise this is the string base to compare against
     * @param _value The string the base is being compared to
     * @return bool Simply notates if the two string have an equivalent
     */
    function compareTo(string memory _base, string memory _value)
        internal
        pure
        returns (bool) {
        bytes memory _baseBytes = bytes(_base);
        bytes memory _valueBytes = bytes(_value);

        if (_baseBytes.length != _valueBytes.length) {
            return false;
        }

        for (uint i = 0; i < _baseBytes.length; i++) {
            if (_baseBytes[i] != _valueBytes[i]) {
                return false;
            }
        }

        return true;
    }

    /**
     * Compare To Ignore Case (High gas cost)
     * 
     * Compares the characters of two strings, converting them to the same case
     * where applicable to alphabetic characters to distinguish if the values
     * match.
     * 
     * @param _base When being used for a data type this is the extended object
     *               otherwise this is the string base to compare against
     * @param _value The string the base is being compared to
     * @return bool Simply notates if the two string have an equivalent value
     *              discarding case
     */
    function compareToIgnoreCase(string memory _base, string memory _value)
        internal
        pure
        returns (bool) {
        bytes memory _baseBytes = bytes(_base);
        bytes memory _valueBytes = bytes(_value);

        if (_baseBytes.length != _valueBytes.length) {
            return false;
        }

        for (uint i = 0; i < _baseBytes.length; i++) {
            if (_baseBytes[i] != _valueBytes[i] &&
            _upper(_baseBytes[i]) != _upper(_valueBytes[i])) {
                return false;
            }
        }

        return true;
    }

    /**
     * Upper
     * 
     * Converts all the values of a string to their corresponding upper case
     * value.
     * 
     * @param _base When being used for a data type this is the extended object
     *              otherwise this is the string base to convert to upper case
     * @return string 
     */
    function upper(string memory _base)
        internal
        pure
        returns (string memory) {
        bytes memory _baseBytes = bytes(_base);
        for (uint i = 0; i < _baseBytes.length; i++) {
            _baseBytes[i] = _upper(_baseBytes[i]);
        }
        return string(_baseBytes);
    }

    /**
     * Lower
     * 
     * Converts all the values of a string to their corresponding lower case
     * value.
     * 
     * @param _base When being used for a data type this is the extended object
     *              otherwise this is the string base to convert to lower case
     * @return string 
     */
    function lower(string memory _base)
        internal
        pure
        returns (string memory) {
        bytes memory _baseBytes = bytes(_base);
        for (uint i = 0; i < _baseBytes.length; i++) {
            _baseBytes[i] = _lower(_baseBytes[i]);
        }
        return string(_baseBytes);
    }

    /**
     * Upper
     * 
     * Convert an alphabetic character to upper case and return the original
     * value when not alphabetic
     * 
     * @param _b1 The byte to be converted to upper case
     * @return bytes1 The converted value if the passed value was alphabetic
     *                and in a lower case otherwise returns the original value
     */
    function _upper(bytes1 _b1)
        private
        pure
        returns (bytes1) {

        if (_b1 >= 0x61 && _b1 <= 0x7A) {
            return bytes1(uint8(_b1) - 32);
        }

        return _b1;
    }

    /**
     * Lower
     * 
     * Convert an alphabetic character to lower case and return the original
     * value when not alphabetic
     * 
     * @param _b1 The byte to be converted to lower case
     * @return bytes1 The converted value if the passed value was alphabetic
     *                and in a upper case otherwise returns the original value
     */
    function _lower(bytes1 _b1)
        private
        pure
        returns (bytes1) {

        if (_b1 >= 0x41 && _b1 <= 0x5A) {
            return bytes1(uint8(_b1) + 32);
        }

        return _b1;
    }
}
// File: Extra/DynamicBuffer.sol


// Copyright (c) 2021 the ethier authors (github.com/divergencetech/ethier)

pragma solidity >=0.8.0;

/// @title DynamicBuffer
/// @author David Huber (@cxkoda) and Simon Fremaux (@dievardump). See also
///         https://raw.githubusercontent.com/dievardump/solidity-dynamic-buffer
/// @notice This library is used to allocate a big amount of container memory
//          which will be subsequently filled without needing to reallocate
///         memory.
/// @dev First, allocate memory.
///      Then use `buffer.appendUnchecked(theBytes)` or `appendSafe()` if
///      bounds checking is required.
library DynamicBuffer {
    /// @notice Allocates container space for the DynamicBuffer
    /// @param capacity The intended max amount of bytes in the buffer
    /// @return buffer The memory location of the buffer
    /// @dev Allocates `capacity + 0x60` bytes of space
    ///      The buffer array starts at the first container data position,
    ///      (i.e. `buffer = container + 0x20`)
    function allocate(uint256 capacity)
        internal
        pure
        returns (bytes memory buffer)
    {
        assembly {
            // Get next-free memory address
            let container := mload(0x40)

            // Allocate memory by setting a new next-free address
            {
                // Add 2 x 32 bytes in size for the two length fields
                // Add 32 bytes safety space for 32B chunked copy
                let size := add(capacity, 0x60)
                let newNextFree := add(container, size)
                mstore(0x40, newNextFree)
            }

            // Set the correct container length
            {
                let length := add(capacity, 0x40)
                mstore(container, length)
            }

            // The buffer starts at idx 1 in the container (0 is length)
            buffer := add(container, 0x20)

            // Init content with length 0
            mstore(buffer, 0)
        }

        return buffer;
    }

    /// @notice Appends data to buffer, and update buffer length
    /// @param buffer the buffer to append the data to
    /// @param data the data to append
    /// @dev Does not perform out-of-bound checks (container capacity)
    ///      for efficiency.
    function appendUnchecked(bytes memory buffer, bytes memory data)
        internal
        pure
    {
        assembly {
            let length := mload(data)
            for {
                data := add(data, 0x20)
                let dataEnd := add(data, length)
                let copyTo := add(buffer, add(mload(buffer), 0x20))
            } lt(data, dataEnd) {
                data := add(data, 0x20)
                copyTo := add(copyTo, 0x20)
            } {
                // Copy 32B chunks from data to buffer.
                // This may read over data array boundaries and copy invalid
                // bytes, which doesn't matter in the end since we will
                // later set the correct buffer length, and have allocated an
                // additional word to avoid buffer overflow.
                mstore(copyTo, mload(data))
            }

            // Update buffer length
            mstore(buffer, add(mload(buffer), length))
        }
    }

    /// @notice Appends data to buffer, and update buffer length
    /// @param buffer the buffer to append the data to
    /// @param data the data to append
    /// @dev Performs out-of-bound checks and calls `appendUnchecked`.
    function appendSafe(bytes memory buffer, bytes memory data) internal pure {
        uint256 capacity;
        uint256 length;
        assembly {
            capacity := sub(mload(sub(buffer, 0x20)), 0x40)
            length := mload(buffer)
        }

        require(
            length + data.length <= capacity,
            "DynamicBuffer: Appending out of bounds."
        );
        appendUnchecked(buffer, data);
    }
}
// File: @openzeppelin/contracts/security/ReentrancyGuard.sol


// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// File: @openzeppelin/contracts/utils/math/Math.sol


// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// File: @openzeppelin/contracts/utils/Strings.sol


// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)

pragma solidity ^0.8.0;


/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// File: @openzeppelin/contracts/utils/Context.sol


// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol


// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: @openzeppelin/contracts/utils/Address.sol


// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol


// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// File: @openzeppelin/contracts/utils/introspection/IERC165.sol


// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// File: @openzeppelin/contracts/utils/introspection/ERC165.sol


// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;


/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// File: @openzeppelin/contracts/token/ERC721/IERC721.sol


// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;


/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol


// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;


/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// File: /Contracts/ERC721R.sol



pragma solidity ^0.8.0;








/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension. This does random batch minting.
 */
contract ERC721r is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;
    
    mapping(uint => uint) private _availableTokens;
    uint256 private _numAvailableTokens;
    uint256 immutable _maxSupply;
    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_, uint maxSupply_) {
        _name = name_;
        _symbol = symbol_;
        _maxSupply = maxSupply_;
        _numAvailableTokens = maxSupply_;
    }
    
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }
    
    function totalSupply() public view virtual returns (uint256) {
        return _maxSupply - _numAvailableTokens;
    }
    
    function maxSupply() public view virtual returns (uint256) {
        return _maxSupply;
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _owners[tokenId];
        require(owner != address(0), "ERC721: owner query for nonexistent token");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721r.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not owner nor approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _safeTransfer(from, to, tokenId, _data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `_data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _owners[tokenId] != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ERC721r.ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
    }

    function _mintIdWithoutBalanceUpdate(address to, uint256 tokenId) private {
        _beforeTokenTransfer(address(0), to, tokenId);
        
        _owners[tokenId] = to;
        
        emit Transfer(address(0), to, tokenId);
        
        _afterTokenTransfer(address(0), to, tokenId);
    }

    function _mintRandom(address to, uint _numToMint) internal virtual {
        require(_msgSender() == tx.origin, "Contracts cannot mint");
        require(to != address(0), "ERC721: mint to the zero address");
        require(_numToMint > 0, "ERC721r: need to mint at least one token");
        
        // TODO: Probably don't need this as it will underflow and revert automatically in this case
        require(_numAvailableTokens >= _numToMint, "ERC721r: minting more tokens than available");
        
        uint updatedNumAvailableTokens = _numAvailableTokens;
        for (uint256 i; i < _numToMint; ++i) { // Do this ++ unchecked?
            uint256 tokenId = getRandomAvailableTokenId(to, updatedNumAvailableTokens);
            
            _mintIdWithoutBalanceUpdate(to, tokenId);
            
            --updatedNumAvailableTokens;
        }
        
        _numAvailableTokens = updatedNumAvailableTokens;
        _balances[to] += _numToMint;
    }
        
    function getRandomAvailableTokenId(address to, uint updatedNumAvailableTokens)
        internal
        returns (uint256)
    {
        uint256 randomNum = uint256(
            keccak256(
                abi.encode(
                    to,
                    // tx.gasprice,
                    // block.number,
                    // block.timestamp,
                    // block.difficulty,
                    // blockhash(block.number - 1),
                    // address(this),
                    updatedNumAvailableTokens
                )
            )
        );
        uint256 randomIndex = randomNum % updatedNumAvailableTokens;
        return getAvailableTokenAtIndex(randomIndex, updatedNumAvailableTokens);
    }

    // Implements https://en.wikipedia.org/wiki/Fisher%E2%80%93Yates_shuffle. Code taken from CryptoPhunksV2
    function getAvailableTokenAtIndex(uint256 indexToUse, uint updatedNumAvailableTokens)
        internal
        returns (uint256)
    {
        uint256 valAtIndex = _availableTokens[indexToUse];
        uint256 result;
        if (valAtIndex == 0) {
            // This means the index itself is still an available token
            result = indexToUse;
        } else {
            // This means the index itself is not an available token, but the val at that index is.
            result = valAtIndex;
        }

        uint256 lastIndex = updatedNumAvailableTokens - 1;
        uint256 lastValInArray = _availableTokens[lastIndex];
        if (indexToUse != lastIndex) {
            // Replace the value at indexToUse, now that it's been used.
            // Replace it with the data from the last index in the array, since we are going to decrease the array size afterwards.
            if (lastValInArray == 0) {
                // This means the index itself is still an available token
                _availableTokens[indexToUse] = lastIndex;
            } else {
                // This means the index itself is not an available token, but the val at that index is.
                _availableTokens[indexToUse] = lastValInArray;
            }
        }
        if (lastValInArray != 0) {
            // Gas refund courtsey of @dievardump
            delete _availableTokens[lastIndex];
        }
        
        return result;
    }
    
    // Not as good as minting a specific tokenId, but will behave the same at the start
    // allowing you to explicitly mint some tokens at launch.
    function _mintAtIndex(address to, uint index) internal virtual {
        require(_msgSender() == tx.origin, "Contracts cannot mint");
        require(to != address(0), "ERC721: mint to the zero address");
        require(_numAvailableTokens >= 1, "ERC721r: minting more tokens than available");
        
        uint tokenId = getAvailableTokenAtIndex(index, _numAvailableTokens);
        --_numAvailableTokens;
        
        _mintIdWithoutBalanceUpdate(to, tokenId);
        
        _balances[to] += 1;
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {
        require(ERC721r.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId);

        _balances[from] -= 1;
        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);

        _afterTokenTransfer(from, to, tokenId);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits a {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721r.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits a {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC721: approve to caller");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
                return retval == IERC721Receiver.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {}
}
// File: Mint Contract/ArbiPunksOnChain.sol










pragma solidity ^0.8.17;

interface PunkDataInterface {
    function punkImage(uint16 index) external view returns (bytes memory);
    function punkAttributes(uint16 index) external view returns (string memory);
}

interface ExtendedPunkDataInterface {
        enum PunkAttributeType {SEX, HAIR, EYES, BEARD, EARS, LIPS, MOUTH, FACE, EMOTION, NECK, NOSE, CHEEKS, TEETH}

        enum PunkAttributeValue {
                NONE, ALIEN, APE, BANDANA, BEANIE, BIG_BEARD, BIG_SHADES, BLACK_LIPSTICK, BLONDE_BOB, 
                BLONDE_SHORT, BLUE_EYE_SHADOW, BUCK_TEETH, CAP, CAP_FORWARD, CHINSTRAP, CHOKER, CIGARETTE, CLASSIC_SHADES, 
                CLOWN_EYES_BLUE, CLOWN_EYES_GREEN, CLOWN_HAIR_GREEN, CLOWN_NOSE, COWBOY_HAT, CRAZY_HAIR, DARK_HAIR, DO_RAG, EARRING,
                EYE_MASK, EYE_PATCH, FEDORA, FEMALE, FRONT_BEARD, FRONT_BEARD_DARK, FROWN, FRUMPY_HAIR, GOAT, GOLD_CHAIN,
                GREEN_EYE_SHADOW, HALF_SHAVED, HANDLEBARS, HEADBAND, HOODIE, HORNED_RIM_GLASSES, HOT_LIPSTICK, KNITTED_CAP,
                LUXURIOUS_BEARD, MALE, MEDICAL_MASK, MESSY_HAIR, MOHAWK, MOHAWK_DARK, MOHAWK_THIN, MOLE, MUSTACHE, MUTTONCHOPS,
                NERD_GLASSES, NORMAL_BEARD, NORMAL_BEARD_BLACK, ORANGE_SIDE, PEAK_SPIKE, PIGTAILS, PILOT_HELMET, PINK_WITH_HAT,
                PIPE, POLICE_CAP, PURPLE_EYE_SHADOW, PURPLE_HAIR, PURPLE_LIPSTICK, RED_MOHAWK, REGULAR_SHADES, ROSY_CHEEKS,
                SHADOW_BEARD, SHAVED_HEAD, SILVER_CHAIN, SMALL_SHADES, SMILE, SPOTS, STRAIGHT_HAIR, STRAIGHT_HAIR_BLONDE,
                STRAIGHT_HAIR_DARK, STRINGY_HAIR, TASSLE_HAT, THREE_D_GLASSES, TIARA, TOP_HAT, VAMPIRE_HAIR, VAPE, VR,
                WELDING_GOGGLES, WILD_BLONDE, WILD_HAIR, WILD_WHITE_HAIR, ZOMBIE
                }


    function attrStringToEnumMapping(string memory) external view returns (ExtendedPunkDataInterface.PunkAttributeValue);
    function attrEnumToStringMapping(PunkAttributeValue) external view returns (string memory);
    function attrValueToTypeEnumMapping(PunkAttributeValue) external view returns (ExtendedPunkDataInterface.PunkAttributeType);
}

contract PunksonArbitrum is ERC721r, Ownable, ReentrancyGuard  {

/// On Chain variables

enum PunkAttributeType {SEX, HAIR, EYES, BEARD, EARS, LIPS, MOUTH, FACE, EMOTION, NECK, NOSE, CHEEKS, TEETH}

    enum PunkAttributeValue {
                NONE, ALIEN, APE, BANDANA, BEANIE, BIG_BEARD, BIG_SHADES, BLACK_LIPSTICK, BLONDE_BOB, 
                BLONDE_SHORT, BLUE_EYE_SHADOW, BUCK_TEETH, CAP, CAP_FORWARD, CHINSTRAP, CHOKER, CIGARETTE, CLASSIC_SHADES, 
                CLOWN_EYES_BLUE, CLOWN_EYES_GREEN, CLOWN_HAIR_GREEN, CLOWN_NOSE, COWBOY_HAT, CRAZY_HAIR, DARK_HAIR, DO_RAG, EARRING,
                EYE_MASK, EYE_PATCH, FEDORA, FEMALE, FRONT_BEARD, FRONT_BEARD_DARK, FROWN, FRUMPY_HAIR, GOAT, GOLD_CHAIN,
                GREEN_EYE_SHADOW, HALF_SHAVED, HANDLEBARS, HEADBAND, HOODIE, HORNED_RIM_GLASSES, HOT_LIPSTICK, KNITTED_CAP,
                LUXURIOUS_BEARD, MALE, MEDICAL_MASK, MESSY_HAIR, MOHAWK, MOHAWK_DARK, MOHAWK_THIN, MOLE, MUSTACHE, MUTTONCHOPS,
                NERD_GLASSES, NORMAL_BEARD, NORMAL_BEARD_BLACK, ORANGE_SIDE, PEAK_SPIKE, PIGTAILS, PILOT_HELMET, PINK_WITH_HAT,
                PIPE, POLICE_CAP, PURPLE_EYE_SHADOW, PURPLE_HAIR, PURPLE_LIPSTICK, RED_MOHAWK, REGULAR_SHADES, ROSY_CHEEKS,
                SHADOW_BEARD, SHAVED_HEAD, SILVER_CHAIN, SMALL_SHADES, SMILE, SPOTS, STRAIGHT_HAIR, STRAIGHT_HAIR_BLONDE,
                STRAIGHT_HAIR_DARK, STRINGY_HAIR, TASSLE_HAT, THREE_D_GLASSES, TIARA, TOP_HAT, VAMPIRE_HAIR, VAPE, VR,
                WELDING_GOGGLES, WILD_BLONDE, WILD_HAIR, WILD_WHITE_HAIR, ZOMBIE
    }

                
    struct Punk {
        uint16 id;
        PunkAttributeValue sex;
        PunkAttributeValue hair;
        PunkAttributeValue eyes;
        PunkAttributeValue beard;
        PunkAttributeValue ears;
        PunkAttributeValue lips;
        PunkAttributeValue mouth;
        PunkAttributeValue face;
        PunkAttributeValue emotion;
        PunkAttributeValue neck;
        PunkAttributeValue nose;
        PunkAttributeValue cheeks;
        PunkAttributeValue teeth;
    }

    using StringUtils for string;
    using Address for address;
    using DynamicBuffer for bytes;
    using Strings for uint256;
    using Strings for uint16;
    using Strings for uint8;

    bytes private constant tokenDescription = "Punks on Arbitrum - Fully stored on the Arbitrum Blockchain";

    PunkDataInterface private immutable punkDataContract;
    ExtendedPunkDataInterface private immutable extendedPunkDataContract;

/// OnChain Variables - end


/// Mint variables
    uint     public mintPrice    = 0.001 ether;
    uint     public freeAmount   = 1000;
    uint     public freeCount    = 0;
    bool     public mintEnabled  = false;

    mapping(address => bool) public FreeAddresses;

    constructor(address punkDataContractAddress, address extendedPunkDataContractAddress) 
    ERC721r("Punks on Arbitrum", "APUNK", 10000) {

        punkDataContract = PunkDataInterface(punkDataContractAddress);
        extendedPunkDataContract = ExtendedPunkDataInterface(extendedPunkDataContractAddress);

    }
    

    function mint(uint256 count) external payable  {
        
        uint256 cost = mintPrice;

        require(mintEnabled, "Mint not ready yet");
        require(totalSupply() + count <= maxSupply(), "Sold Out!");
        require(msg.value >= count * cost, "Please send the exact ETH amount");
        require(msg.sender == tx.origin, "The minter is another contract");

        _mintRandom(msg.sender, count);

    }

    function free_mint() external  {
        uint256 count = 1;
        
        require(FreeAddresses[msg.sender] == false, "Free Mint already claimed");
        require(freeCount < freeAmount, "Free sold out - Mint a paid!");
        require(mintEnabled, "Mint is not live yet");
        require(totalSupply() + count <= maxSupply(), "Sold Out!");
        require(msg.sender == tx.origin, "The minter is another contract");

        freeCount = freeCount + 1;
        FreeAddresses[msg.sender] = true;
        _mintRandom(msg.sender, count);

    }

    function set_Price(uint _price) public onlyOwner {
        mintPrice = _price;            
    }

    function set_freeAmount(uint _freeAmount) public onlyOwner {
        freeAmount = _freeAmount;            
    }

    function toggle_Minting() external onlyOwner {
        mintEnabled = !mintEnabled;
    }

    function withdraw() external onlyOwner nonReentrant {
        (bool success, ) = msg.sender.call{value: address(this).balance}("");
        require(success, "Transfer failed.");
    }

    function team_mint() external onlyOwner nonReentrant {
        _mintRandom(msg.sender, 100);

    }


// OnChain Metadata Functions

    function exists(uint tokenId) external view returns (bool) {
        return _exists(tokenId);
    }

    function tokenURI(uint256 id) public view override returns (string memory) {
        require(_exists(id), "Token does not exist");
        return constructTokenURI(uint16(id));
    }

    function constructTokenURI(uint16 tokenId) private view returns (string memory) {
        bytes memory svg = bytes(tokenImage(tokenId));
        bytes memory title = abi.encodePacked("ArbiPunk #", tokenId.toString());
        
        return
            string(
                abi.encodePacked(
                    "data:application/json;base64,",
                    Base64.encode(
                        bytes(
                            abi.encodePacked(
                                '{',
                                '"name":"', title, '",'
                                '"description":"', tokenDescription, '",'
                                '"background_color":"28A0F0",'
                                '"image_data":"data:image/svg+xml;base64,', Base64.encode(svg), '",'
                                '"attributes": ',
                                punkAttributesAsJSON(tokenId), 
                                '}'
                            )
                        )
                    )
                )
            );
    }

    function initializePunk(uint16 punkId) private view returns (Punk memory) {
        Punk memory punk = Punk({
            id: punkId,
            sex: PunkAttributeValue.NONE,
            hair: PunkAttributeValue.NONE,
            eyes: PunkAttributeValue.NONE,
            beard: PunkAttributeValue.NONE,
            ears: PunkAttributeValue.NONE,
            lips: PunkAttributeValue.NONE,
            mouth: PunkAttributeValue.NONE,
            face: PunkAttributeValue.NONE,
            emotion: PunkAttributeValue.NONE,
            neck: PunkAttributeValue.NONE,
            nose: PunkAttributeValue.NONE,
            cheeks: PunkAttributeValue.NONE,
            teeth: PunkAttributeValue.NONE
        });
        
        punk.id = punkId;
        
        string memory attributes = punkDataContract.punkAttributes(punk.id);

        string[] memory attributeArray = attributes.split(",");
        
        for (uint i = 0; i < attributeArray.length; i++) {
            string memory untrimmedAttribute = attributeArray[i];
            string memory trimmedAttribute;
            
            if (i < 1) {
                trimmedAttribute = untrimmedAttribute.split(' ')[0];
            } else {
                trimmedAttribute = untrimmedAttribute._substring(int(bytes(untrimmedAttribute).length - 1), 1);
            }
            
            PunkAttributeValue attrValue = PunkAttributeValue(uint(extendedPunkDataContract.attrStringToEnumMapping(trimmedAttribute)));
            PunkAttributeType attrType = PunkAttributeType(uint(extendedPunkDataContract.attrValueToTypeEnumMapping(ExtendedPunkDataInterface.PunkAttributeValue(uint(attrValue)))));
            
            if (attrType == PunkAttributeType.SEX) {
                punk.sex = attrValue;
            } else if (attrType == PunkAttributeType.HAIR) {
                punk.hair = attrValue;
            } else if (attrType == PunkAttributeType.EYES) {
                punk.eyes = attrValue;
            } else if (attrType == PunkAttributeType.BEARD) {
                punk.beard = attrValue;
            } else if (attrType == PunkAttributeType.EARS) {
                punk.ears = attrValue;
            } else if (attrType == PunkAttributeType.LIPS) {
                punk.lips = attrValue;
            } else if (attrType == PunkAttributeType.MOUTH) {
                punk.mouth = attrValue;
            } else if (attrType == PunkAttributeType.FACE) {
                punk.face = attrValue;
            } else if (attrType == PunkAttributeType.EMOTION) {
                punk.emotion = attrValue;
            } else if (attrType == PunkAttributeType.NECK) {
                punk.neck = attrValue;
            } else if (attrType == PunkAttributeType.NOSE) {
                punk.nose = attrValue;
            } else if (attrType == PunkAttributeType.CHEEKS) {
                punk.cheeks = attrValue;
            } else if (attrType == PunkAttributeType.TEETH) {
                punk.teeth = attrValue;
            }
        }
        
        return punk;
    }

    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    function tokenImage(uint16 tokenId) public view returns (string memory) {
        bytes memory pixels = punkDataContract.punkImage(uint16(tokenId));
        bytes memory svgBytes = DynamicBuffer.allocate(1024 * 128);
        
        svgBytes.appendSafe('<svg width="1200" height="1200" shape-rendering="crispEdges" xmlns="http://www.w3.org/2000/svg" version="1.2" viewBox="0 0 24 24"><style>rect{width:1px;height:1px}</style><rect x="0" y="0" style="width:100%;height:100%" fill="#28A0F0" /><g style="transform: translate(calc(50% - 12px), calc(50% - 12px))">');
        
        bytes memory buffer = new bytes(8);
        for (uint256 y = 0; y < 24; y++) {
            for (uint256 x = 0; x < 24; x++) {
                uint256 p = (y * 24 + x) * 4;
                if (uint8(pixels[p + 3]) > 0) {
                    for (uint256 i = 0; i < 4; i++) {
                        uint8 value = uint8(pixels[p + i]);
                        
                        buffer[i * 2 + 1] = _HEX_SYMBOLS[value & 0xf];
                        value >>= 4;
                        buffer[i * 2] = _HEX_SYMBOLS[value & 0xf];
                    }

                    string memory oldColor = string(buffer);
                    
                    svgBytes.appendSafe(
                        abi.encodePacked(
                            '<rect x="',
                            x.toString(),
                            '" y="',
                            y.toString(),
                            '" fill="#',
                            oldColor,
                            '"/>'
                        )
                    );
                }
            }
        }
        
        svgBytes.appendSafe('</g></svg>');
        return string(svgBytes);
    }

    function punkAttributeCount(Punk memory punk) private pure returns (uint totalCount) {
        PunkAttributeValue[13] memory attrArray = [
            punk.sex,
            punk.hair,
            punk.eyes,
            punk.beard,
            punk.ears,
            punk.lips,
            punk.mouth,
            punk.face,
            punk.emotion,
            punk.neck,
            punk.nose,
            punk.cheeks,
            punk.teeth
        ];
        
        for (uint i = 0; i < 13; ++i) {
            if (attrArray[i] != PunkAttributeValue.NONE) {
                totalCount++;
            }
        }
        // Don't count sex as an attribute
        totalCount--;
    }

    function punkAttributesAsJSON(uint16 punkId) public view returns (string memory json) {
        Punk memory punk = initializePunk(punkId);
        PunkAttributeValue none = PunkAttributeValue.NONE;
        
        bytes memory output = "[";
        
        PunkAttributeValue[13] memory attrArray = [
            punk.sex,
            punk.hair,
            punk.eyes,
            punk.beard,
            punk.ears,
            punk.lips,
            punk.mouth,
            punk.face,
            punk.emotion,
            punk.neck,
            punk.nose,
            punk.cheeks,
            punk.teeth
        ];

        uint attrCount = punkAttributeCount(punk);
        uint count = 0;

        for (uint i = 0; i < 13; ++i) {
            PunkAttributeValue attrVal = attrArray[i];

            if (attrVal != none) {
                output = abi.encodePacked(output, punkAttributeAsJSON(attrVal));

                if (count < attrCount) {
                    output.appendSafe(",");
                    ++count;
                }
            }
        }
        
        return string(abi.encodePacked(output, "]"));
    }

    function punkAttributeAsJSON(PunkAttributeValue attribute) internal view returns (string memory json) {
        require(attribute != PunkAttributeValue.NONE);

        string memory attributeAsString = extendedPunkDataContract.attrEnumToStringMapping(ExtendedPunkDataInterface.PunkAttributeValue(uint(attribute)));
        string memory attributeTypeAsString;
        
        PunkAttributeType attrType = PunkAttributeType(uint(extendedPunkDataContract.attrValueToTypeEnumMapping(ExtendedPunkDataInterface.PunkAttributeValue(uint(attribute)))));

        if (attrType == PunkAttributeType.SEX) {
            attributeTypeAsString = "Sex";
        } else if (attrType == PunkAttributeType.HAIR) {
            attributeTypeAsString = "Hair";
        } else if (attrType == PunkAttributeType.EYES) {
            attributeTypeAsString = "Eyes";
        } else if (attrType == PunkAttributeType.BEARD) {
            attributeTypeAsString = "Beard";
        } else if (attrType == PunkAttributeType.EARS) {
            attributeTypeAsString = "Ears";
        } else if (attrType == PunkAttributeType.LIPS) {
            attributeTypeAsString = "Lips";
        } else if (attrType == PunkAttributeType.MOUTH) {
            attributeTypeAsString = "Mouth";
        } else if (attrType == PunkAttributeType.FACE) {
            attributeTypeAsString = "Face";
        } else if (attrType == PunkAttributeType.EMOTION) {
            attributeTypeAsString = "Emotion";
        } else if (attrType == PunkAttributeType.NECK) {
            attributeTypeAsString = "Neck";
        } else if (attrType == PunkAttributeType.NOSE) {
            attributeTypeAsString = "Nose";
        } else if (attrType == PunkAttributeType.CHEEKS) {
            attributeTypeAsString = "Cheeks";
        } else if (attrType == PunkAttributeType.TEETH) {
            attributeTypeAsString = "Teeth";
        }
        
        return string(abi.encodePacked('{"trait_type":"', attributeTypeAsString, '", "value":"', attributeAsString, '"}'));
    }

}

{
  "compilationTarget": {
    "PunksonArbitrum.sol": "PunksonArbitrum"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}