// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/**
* @dev Collection of functions related to the address type
*/libraryAddress{
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/functionisContract(address account) internalviewreturns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in// construction, since the code is only stored at the end of the// constructor execution.uint256 size;
assembly {
size :=extcodesize(account)
}
return size >0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/functionsendValue(addresspayable recipient, uint256 amount) internal{
require(address(this).balance>= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/functionfunctionCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target,
bytesmemory data,
uint256 value
) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target,
bytesmemory data,
uint256 value,
stringmemory errorMessage
) internalreturns (bytesmemory) {
require(address(this).balance>= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytesmemory returndata) = target.call{value: value}(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target, bytesmemory data) internalviewreturns (bytesmemory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalviewreturns (bytesmemory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytesmemory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/functionfunctionDelegateCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/functionfunctionDelegateCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalreturns (bytesmemory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytesmemory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function_verifyCallResult(bool success,
bytesmemory returndata,
stringmemory errorMessage
) privatepurereturns (bytesmemory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if presentif (returndata.length>0) {
// The easiest way to bubble the revert reason is using memory via assemblyassembly {
let returndata_size :=mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/abstractcontractContext{
function_msgSender() internalviewvirtualreturns (address) {
returnmsg.sender;
}
function_msgData() internalviewvirtualreturns (bytescalldata) {
returnmsg.data;
}
}
Contract Source Code
File 5 of 17: ERC165.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/abstractcontractERC165isIERC165{
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverridereturns (bool) {
return interfaceId ==type(IERC165).interfaceId;
}
}
Contract Source Code
File 6 of 17: ERC721.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"./IERC721.sol";
import"./IERC721Receiver.sol";
import"./extensions/IERC721Metadata.sol";
import"../../utils/Address.sol";
import"../../utils/Context.sol";
import"../../utils/Strings.sol";
import"../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/contractERC721isContext, ERC165, IERC721, IERC721Metadata{
usingAddressforaddress;
usingStringsforuint256;
// Token namestringprivate _name;
// Token symbolstringprivate _symbol;
// Mapping from token ID to owner addressmapping(uint256=>address) private _owners;
// Mapping owner address to token countmapping(address=>uint256) private _balances;
// Mapping from token ID to approved addressmapping(uint256=>address) private _tokenApprovals;
// Mapping from owner to operator approvalsmapping(address=>mapping(address=>bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/constructor(stringmemory name_, stringmemory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverride(ERC165, IERC165) returns (bool) {
return
interfaceId ==type(IERC721).interfaceId||
interfaceId ==type(IERC721Metadata).interfaceId||super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/functionbalanceOf(address owner) publicviewvirtualoverridereturns (uint256) {
require(owner !=address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/functionownerOf(uint256 tokenId) publicviewvirtualoverridereturns (address) {
address owner = _owners[tokenId];
require(owner !=address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/functionname() publicviewvirtualoverridereturns (stringmemory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/functionsymbol() publicviewvirtualoverridereturns (stringmemory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/functiontokenURI(uint256 tokenId) publicviewvirtualoverridereturns (stringmemory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
stringmemory baseURI = _baseURI();
returnbytes(baseURI).length>0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/function_baseURI() internalviewvirtualreturns (stringmemory) {
return"";
}
/**
* @dev See {IERC721-approve}.
*/functionapprove(address to, uint256 tokenId) publicvirtualoverride{
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/functiongetApproved(uint256 tokenId) publicviewvirtualoverridereturns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/functionsetApprovalForAll(address operator, bool approved) publicvirtualoverride{
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/functionisApprovedForAll(address owner, address operator) publicviewvirtualoverridereturns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/functiontransferFrom(addressfrom,
address to,
uint256 tokenId
) publicvirtualoverride{
//solhint-disable-next-line max-line-lengthrequire(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 tokenId
) publicvirtualoverride{
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 tokenId,
bytesmemory _data
) publicvirtualoverride{
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/function_safeTransfer(addressfrom,
address to,
uint256 tokenId,
bytesmemory _data
) internalvirtual{
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/function_exists(uint256 tokenId) internalviewvirtualreturns (bool) {
return _owners[tokenId] !=address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/function_isApprovedOrOwner(address spender, uint256 tokenId) internalviewvirtualreturns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/function_safeMint(address to, uint256 tokenId) internalvirtual{
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/function_safeMint(address to,
uint256 tokenId,
bytesmemory _data
) internalvirtual{
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/function_mint(address to, uint256 tokenId) internalvirtual{
require(to !=address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] +=1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/function_burn(uint256 tokenId) internalvirtual{
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -=1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/function_transfer(addressfrom,
address to,
uint256 tokenId
) internalvirtual{
require(ERC721.ownerOf(tokenId) ==from, "ERC721: transfer of token that is not own");
require(to !=address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -=1;
_balances[to] +=1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/function_approve(address to, uint256 tokenId) internalvirtual{
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/function_checkOnERC721Received(addressfrom,
address to,
uint256 tokenId,
bytesmemory _data
) privatereturns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytesmemory reason) {
if (reason.length==0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
returntrue;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/function_beforeTokenTransfer(addressfrom,
address to,
uint256 tokenId
) internalvirtual{}
}
Contract Source Code
File 7 of 17: ERC721Enumerable.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"../ERC721.sol";
import"./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/abstractcontractERC721EnumerableisERC721, IERC721Enumerable{
// Mapping from owner to list of owned token IDsmapping(address=>mapping(uint256=>uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens listmapping(uint256=>uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumerationuint256[] private _allTokens;
// Mapping from token id to position in the allTokens arraymapping(uint256=>uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverride(IERC165, ERC721) returns (bool) {
return interfaceId ==type(IERC721Enumerable).interfaceId||super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/functiontokenOfOwnerByIndex(address owner, uint256 index) publicviewvirtualoverridereturns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/functiontotalSupply() publicviewvirtualoverridereturns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/functiontokenByIndex(uint256 index) publicviewvirtualoverridereturns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/function_beforeTokenTransfer(addressfrom,
address to,
uint256 tokenId
) internalvirtualoverride{
super._beforeTokenTransfer(from, to, tokenId);
if (from==address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} elseif (from!= to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to ==address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} elseif (to !=from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/function_addTokenToOwnerEnumeration(address to, uint256 tokenId) private{
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/function_addTokenToAllTokensEnumeration(uint256 tokenId) private{
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/function_removeTokenFromOwnerEnumeration(addressfrom, uint256 tokenId) private{
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and// then delete the last slot (swap and pop).uint256 lastTokenIndex = ERC721.balanceOf(from) -1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessaryif (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the arraydelete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/function_removeTokenFromAllTokensEnumeration(uint256 tokenId) private{
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and// then delete the last slot (swap and pop).uint256 lastTokenIndex = _allTokens.length-1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding// an 'if' statement (like in _removeTokenFromOwnerEnumeration)uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index// This also deletes the contents at the last position of the arraydelete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
Contract Source Code
File 8 of 17: IERC165.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/interfaceIERC165{
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/functionsupportsInterface(bytes4 interfaceId) externalviewreturns (bool);
}
Contract Source Code
File 9 of 17: IERC721.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/interfaceIERC721isIERC165{
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/eventTransfer(addressindexedfrom, addressindexed to, uint256indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/eventApproval(addressindexed owner, addressindexed approved, uint256indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/eventApprovalForAll(addressindexed owner, addressindexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/functionbalanceOf(address owner) externalviewreturns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/functionownerOf(uint256 tokenId) externalviewreturns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/functiontransferFrom(addressfrom,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/functionapprove(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/functiongetApproved(uint256 tokenId) externalviewreturns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/functionsetApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/functionisApprovedForAll(address owner, address operator) externalviewreturns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 tokenId,
bytescalldata data
) external;
}
Contract Source Code
File 10 of 17: IERC721Enumerable.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/interfaceIERC721EnumerableisIERC721{
/**
* @dev Returns the total amount of tokens stored by the contract.
*/functiontotalSupply() externalviewreturns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/functiontokenOfOwnerByIndex(address owner, uint256 index) externalviewreturns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/functiontokenByIndex(uint256 index) externalviewreturns (uint256);
}
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/interfaceIERC721Receiver{
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/functiononERC721Received(address operator,
addressfrom,
uint256 tokenId,
bytescalldata data
) externalreturns (bytes4);
}
Contract Source Code
File 13 of 17: MutantApeYachtClub.sol
// SPDX-License-Identifier: MITpragmasolidity 0.8.6;import"@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import"@openzeppelin/contracts/access/Ownable.sol";
import"@openzeppelin/contracts/security/Pausable.sol";
import"@openzeppelin/contracts/security/ReentrancyGuard.sol";
import"@openzeppelin/contracts/utils/Strings.sol";
import"./Bayc.sol";
import"./Bacc.sol";
// |||||\ |||||\ |||||\ |||||\// ||||| | ||||| | ||||| | ||||| |// \__|||||\ |||||\___\| \__|||||\ |||||\___\|// ||||| | ||||| | ||||| | ||||| |// \__|||||\___\| Y u g a \__|||||\___\|// ||||| | L a b s ||||| |// |||||\___\| |||||\___\|// ||||| | ||||| |// \__|||||||||||\ \__|||||||||||\// ||||||||||| | ||||||||||| |// \_________\| \_________\|contractMutantApeYachtClubisERC721Enumerable, Ownable, ReentrancyGuard{
// Provenance hash for all mutants (Minted, Mutated Ape, MEGA)stringpublicconstant MAYC_PROVENANCE ="ca7151cc436da0dc3a3d662694f8c9da5ae39a7355fabaafc00e6aa580927175";
// IDs 0 - 9999: Minted Mutants// IDs 10000 - 29999: Mutated Apes// IDs 30000 - 3007: MEGA Mutantsuint8privateconstant NUM_MUTANT_TYPES =2;
uint256privateconstant MEGA_MUTATION_TYPE =69;
uint256publicconstant NUM_MEGA_MUTANTS =8;
uint16privateconstant MAX_MEGA_MUTATION_ID =30007;
uint256publicconstant SERUM_MUTATION_OFFSET =10000;
uint256publicconstant PS_MAX_MUTANT_PURCHASE =20;
// Max supply of Minted Mutantsuint256publicconstant PS_MAX_MUTANTS =10000;
// Public sale final price - 0.01 ETHuint256publicconstant PS_MUTANT_ENDING_PRICE =10000000000000000;
// Public sale starting price - mutable, in case we need to pause// and restart the saleuint256public publicSaleMutantStartingPrice;
// Supply of Minted Mutants (not Mutated Apes)uint256public numMutantsMinted;
// Public sale paramsuint256public publicSaleDuration;
uint256public publicSaleStartTime;
// Sale switchesboolpublic publicSaleActive;
boolpublic serumMutationActive;
// Starting index block for the entire collectionuint256public collectionStartingIndexBlock;
// Starting index for Minted Mutantsuint256public mintedMutantsStartingIndex;
// Starting index for MEGA Mutantsuint256public megaMutantsStartingIndex;
uint16private currentMegaMutationId =30000;
mapping(uint256=>uint256) private megaMutationIdsByApe;
stringprivate baseURI;
Bayc privateimmutable bayc;
Bacc privateimmutable bacc;
eventMutantPublicSaleStart(uint256indexed _saleDuration,
uint256indexed _saleStartTime
);
eventMutantPublicSalePaused(uint256indexed _currentPrice,
uint256indexed _timeElapsed
);
eventStartingIndicesSet(uint256indexed _mintedMutantsStartingIndex,
uint256indexed _megaMutantsStartingIndex
);
modifierwhenPublicSaleActive() {
require(publicSaleActive, "Public sale is not active");
_;
}
modifierstartingIndicesNotSet() {
require(
mintedMutantsStartingIndex ==0,
"Minted Mutants starting index is already set"
);
require(
megaMutantsStartingIndex ==0,
"Mega Mutants starting index is already set"
);
_;
}
constructor(stringmemory name,
stringmemory symbol,
address baycAddress,
address baccAddress
) ERC721(name, symbol) {
bayc = Bayc(baycAddress);
bacc = Bacc(baccAddress);
}
functionstartPublicSale(uint256 saleDuration, uint256 saleStartPrice)
externalonlyOwner{
require(!publicSaleActive, "Public sale has already begun");
publicSaleDuration = saleDuration;
publicSaleMutantStartingPrice = saleStartPrice;
publicSaleStartTime =block.timestamp;
publicSaleActive =true;
emit MutantPublicSaleStart(saleDuration, publicSaleStartTime);
}
functionpausePublicSale() externalonlyOwnerwhenPublicSaleActive{
uint256 currentSalePrice = getMintPrice();
publicSaleActive =false;
emit MutantPublicSalePaused(currentSalePrice, getElapsedSaleTime());
}
functiongetElapsedSaleTime() internalviewreturns (uint256) {
return
publicSaleStartTime >0 ? block.timestamp- publicSaleStartTime : 0;
}
functiongetRemainingSaleTime() externalviewreturns (uint256) {
require(publicSaleStartTime >0, "Public sale hasn't started yet");
if (getElapsedSaleTime() >= publicSaleDuration) {
return0;
}
return (publicSaleStartTime + publicSaleDuration) -block.timestamp;
}
functiongetMintPrice() publicviewwhenPublicSaleActivereturns (uint256) {
uint256 elapsed = getElapsedSaleTime();
if (elapsed >= publicSaleDuration) {
return PS_MUTANT_ENDING_PRICE;
} else {
uint256 currentPrice = ((publicSaleDuration - elapsed) *
publicSaleMutantStartingPrice) / publicSaleDuration;
return
currentPrice > PS_MUTANT_ENDING_PRICE
? currentPrice
: PS_MUTANT_ENDING_PRICE;
}
}
functionwithdraw() externalonlyOwner{
uint256 balance =address(this).balance;
Address.sendValue(payable(owner()), balance);
}
functionmintMutants(uint256 numMutants)
externalpayablewhenPublicSaleActivenonReentrant{
require(
numMutantsMinted + numMutants <= PS_MAX_MUTANTS,
"Minting would exceed max supply"
);
require(numMutants >0, "Must mint at least one mutant");
require(
numMutants <= PS_MAX_MUTANT_PURCHASE,
"Requested number exceeds maximum"
);
uint256 costToMint = getMintPrice() * numMutants;
require(costToMint <=msg.value, "Ether value sent is not correct");
if (mintedMutantsStartingIndex ==0) {
collectionStartingIndexBlock =block.number;
}
for (uint256 i =0; i < numMutants; i++) {
uint256 mintIndex = numMutantsMinted;
if (numMutantsMinted < PS_MAX_MUTANTS) {
numMutantsMinted++;
_safeMint(msg.sender, mintIndex);
}
}
if (msg.value> costToMint) {
Address.sendValue(payable(msg.sender), msg.value- costToMint);
}
}
functionmutateApeWithSerum(uint256 serumTypeId, uint256 apeId)
externalnonReentrant{
require(serumMutationActive, "Serum Mutation is not active");
require(
bayc.ownerOf(apeId) ==msg.sender,
"Must own the ape you're attempting to mutate"
);
require(
bacc.balanceOf(msg.sender, serumTypeId) >0,
"Must own at least one of this serum type to mutate"
);
uint256 mutantId;
if (serumTypeId == MEGA_MUTATION_TYPE) {
require(
currentMegaMutationId <= MAX_MEGA_MUTATION_ID,
"Would exceed supply of serum-mutatable MEGA MUTANTS"
);
require(
megaMutationIdsByApe[apeId] ==0,
"Ape already mutated with MEGA MUTATION SERUM"
);
mutantId = currentMegaMutationId;
megaMutationIdsByApe[apeId] = mutantId;
currentMegaMutationId++;
} else {
mutantId = getMutantId(serumTypeId, apeId);
require(
!_exists(mutantId),
"Ape already mutated with this type of serum"
);
}
bacc.burnSerumForAddress(serumTypeId, msg.sender);
_safeMint(msg.sender, mutantId);
}
functiongetMutantIdForApeAndSerumCombination(uint256 apeId,
uint8 serumTypeId
) externalviewreturns (uint256) {
uint256 mutantId;
if (serumTypeId == MEGA_MUTATION_TYPE) {
mutantId = megaMutationIdsByApe[apeId];
require(mutantId >0, "Invalid MEGA Mutant Id");
} else {
mutantId = getMutantId(serumTypeId, apeId);
}
require(_exists(mutantId), "Query for nonexistent mutant");
return mutantId;
}
functionhasApeBeenMutatedWithType(uint8 serumType, uint256 apeId)
externalviewreturns (bool)
{
if (serumType == MEGA_MUTATION_TYPE) {
return megaMutationIdsByApe[apeId] >0;
}
uint256 mutantId = getMutantId(serumType, apeId);
return _exists(mutantId);
}
functiongetMutantId(uint256 serumType, uint256 apeId)
internalpurereturns (uint256)
{
require(
serumType != MEGA_MUTATION_TYPE,
"Mega mutant ID can't be calculated"
);
return (apeId * NUM_MUTANT_TYPES) + serumType + SERUM_MUTATION_OFFSET;
}
functionisMinted(uint256 tokenId) externalviewreturns (bool) {
require(
tokenId < MAX_MEGA_MUTATION_ID,
"tokenId outside collection bounds"
);
return _exists(tokenId);
}
functiontotalApesMutated() externalviewreturns (uint256) {
return totalSupply() - numMutantsMinted;
}
function_baseURI() internalviewoverridereturns (stringmemory) {
return baseURI;
}
functionsetBaseURI(stringmemory uri) externalonlyOwner{
baseURI = uri;
}
functiontogglePublicSaleActive() externalonlyOwner{
publicSaleActive =!publicSaleActive;
}
functiontoggleSerumMutationActive() externalonlyOwner{
serumMutationActive =!serumMutationActive;
}
functioncalculateStartingIndex(uint256 blockNumber, uint256 collectionSize)
internalviewreturns (uint256)
{
returnuint256(blockhash(blockNumber)) % collectionSize;
}
functionsetStartingIndices() externalstartingIndicesNotSet{
require(
collectionStartingIndexBlock !=0,
"Starting index block must be set"
);
uint256 elapsed = getElapsedSaleTime();
require(
elapsed >= publicSaleDuration && publicSaleStartTime >0,
"Invalid setStartingIndices conditions"
);
mintedMutantsStartingIndex = calculateStartingIndex(
collectionStartingIndexBlock,
PS_MAX_MUTANTS
);
megaMutantsStartingIndex = calculateStartingIndex(
collectionStartingIndexBlock,
NUM_MEGA_MUTANTS
);
if ((block.number- collectionStartingIndexBlock) >255) {
mintedMutantsStartingIndex = calculateStartingIndex(
block.number-1,
PS_MAX_MUTANTS
);
megaMutantsStartingIndex = calculateStartingIndex(
block.number-1,
NUM_MEGA_MUTANTS
);
}
// Prevent default sequenceif (mintedMutantsStartingIndex ==0) {
mintedMutantsStartingIndex++;
}
if (megaMutantsStartingIndex ==0) {
megaMutantsStartingIndex++;
}
emit StartingIndicesSet(
mintedMutantsStartingIndex,
megaMutantsStartingIndex
);
}
}
Contract Source Code
File 14 of 17: Ownable.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/abstractcontractOwnableisContext{
addressprivate _owner;
eventOwnershipTransferred(addressindexed previousOwner, addressindexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/functionowner() publicviewvirtualreturns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/modifieronlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/functionrenounceOwnership() publicvirtualonlyOwner{
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/functiontransferOwnership(address newOwner) publicvirtualonlyOwner{
require(newOwner !=address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function_setOwner(address newOwner) private{
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
Contract Source Code
File 15 of 17: Pausable.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"../utils/Context.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/abstractcontractPausableisContext{
/**
* @dev Emitted when the pause is triggered by `account`.
*/eventPaused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/eventUnpaused(address account);
boolprivate _paused;
/**
* @dev Initializes the contract in unpaused state.
*/constructor() {
_paused =false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/functionpaused() publicviewvirtualreturns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/modifierwhenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/modifierwhenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/function_pause() internalvirtualwhenNotPaused{
_paused =true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/function_unpause() internalvirtualwhenPaused{
_paused =false;
emit Unpaused(_msgSender());
}
}
Contract Source Code
File 16 of 17: ReentrancyGuard.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/abstractcontractReentrancyGuard{
// Booleans are more expensive than uint256 or any type that takes up a full// word because each write operation emits an extra SLOAD to first read the// slot's contents, replace the bits taken up by the boolean, and then write// back. This is the compiler's defense against contract upgrades and// pointer aliasing, and it cannot be disabled.// The values being non-zero value makes deployment a bit more expensive,// but in exchange the refund on every call to nonReentrant will be lower in// amount. Since refunds are capped to a percentage of the total// transaction's gas, it is best to keep them low in cases like this one, to// increase the likelihood of the full refund coming into effect.uint256privateconstant _NOT_ENTERED =1;
uint256privateconstant _ENTERED =2;
uint256private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/modifiernonReentrant() {
// On the first call to nonReentrant, _notEntered will be truerequire(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
Contract Source Code
File 17 of 17: Strings.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;/**
* @dev String operations.
*/libraryStrings{
bytes16privateconstant _HEX_SYMBOLS ="0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/functiontoString(uint256 value) internalpurereturns (stringmemory) {
// Inspired by OraclizeAPI's implementation - MIT licence// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.solif (value ==0) {
return"0";
}
uint256 temp = value;
uint256 digits;
while (temp !=0) {
digits++;
temp /=10;
}
bytesmemory buffer =newbytes(digits);
while (value !=0) {
digits -=1;
buffer[digits] =bytes1(uint8(48+uint256(value %10)));
value /=10;
}
returnstring(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/functiontoHexString(uint256 value) internalpurereturns (stringmemory) {
if (value ==0) {
return"0x00";
}
uint256 temp = value;
uint256 length =0;
while (temp !=0) {
length++;
temp >>=8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/functiontoHexString(uint256 value, uint256 length) internalpurereturns (stringmemory) {
bytesmemory buffer =newbytes(2* length +2);
buffer[0] ="0";
buffer[1] ="x";
for (uint256 i =2* length +1; i >1; --i) {
buffer[i] = _HEX_SYMBOLS[value &0xf];
value >>=4;
}
require(value ==0, "Strings: hex length insufficient");
returnstring(buffer);
}
}