////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%*=======================+#%%%+=========*%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%*...........#%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%*...........#%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%*...........#%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%*...........#%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%*...........#%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%*...........#%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%*...........#%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%*...........#%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%*...........#%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%%-.........=%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%%#*********#%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%#==========+%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%#==========+%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%#==========+%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%#==========+%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%.........................=%%#==========+%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%*========================#%%%#*********#%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% //
// //
// //
////////////////////////////////////////////////////////////////////////////////////////////
//
// Made with love by uwu Labs <3
// Sources flattened with hardhat v2.13.0 https://hardhat.org
// File @openzeppelin/contracts/utils/introspection/IERC165.sol@v4.8.2
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity 0.8.17;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File @manifoldxyz/creator-core-solidity/contracts/core/ICreatorCore.sol@v3.0.0
/// @author: manifold.xyz
/**
* @dev Core creator interface
*/
interface ICreatorCore is IERC165 {
event ExtensionRegistered(address indexed extension, address indexed sender);
event ExtensionUnregistered(address indexed extension, address indexed sender);
event ExtensionBlacklisted(address indexed extension, address indexed sender);
event MintPermissionsUpdated(address indexed extension, address indexed permissions, address indexed sender);
event RoyaltiesUpdated(uint256 indexed tokenId, address payable[] receivers, uint256[] basisPoints);
event DefaultRoyaltiesUpdated(address payable[] receivers, uint256[] basisPoints);
event ApproveTransferUpdated(address extension);
event ExtensionRoyaltiesUpdated(address indexed extension, address payable[] receivers, uint256[] basisPoints);
event ExtensionApproveTransferUpdated(address indexed extension, bool enabled);
/**
* @dev gets address of all extensions
*/
function getExtensions() external view returns (address[] memory);
/**
* @dev add an extension. Can only be called by contract owner or admin.
* extension address must point to a contract implementing ICreatorExtension.
* Returns True if newly added, False if already added.
*/
function registerExtension(address extension, string calldata baseURI) external;
/**
* @dev add an extension. Can only be called by contract owner or admin.
* extension address must point to a contract implementing ICreatorExtension.
* Returns True if newly added, False if already added.
*/
function registerExtension(address extension, string calldata baseURI, bool baseURIIdentical) external;
/**
* @dev add an extension. Can only be called by contract owner or admin.
* Returns True if removed, False if already removed.
*/
function unregisterExtension(address extension) external;
/**
* @dev blacklist an extension. Can only be called by contract owner or admin.
* This function will destroy all ability to reference the metadata of any tokens created
* by the specified extension. It will also unregister the extension if needed.
* Returns True if removed, False if already removed.
*/
function blacklistExtension(address extension) external;
/**
* @dev set the baseTokenURI of an extension. Can only be called by extension.
*/
function setBaseTokenURIExtension(string calldata uri) external;
/**
* @dev set the baseTokenURI of an extension. Can only be called by extension.
* For tokens with no uri configured, tokenURI will return "uri+tokenId"
*/
function setBaseTokenURIExtension(string calldata uri, bool identical) external;
/**
* @dev set the common prefix of an extension. Can only be called by extension.
* If configured, and a token has a uri set, tokenURI will return "prefixURI+tokenURI"
* Useful if you want to use ipfs/arweave
*/
function setTokenURIPrefixExtension(string calldata prefix) external;
/**
* @dev set the tokenURI of a token extension. Can only be called by extension that minted token.
*/
function setTokenURIExtension(uint256 tokenId, string calldata uri) external;
/**
* @dev set the tokenURI of a token extension for multiple tokens. Can only be called by extension that minted token.
*/
function setTokenURIExtension(uint256[] memory tokenId, string[] calldata uri) external;
/**
* @dev set the baseTokenURI for tokens with no extension. Can only be called by owner/admin.
* For tokens with no uri configured, tokenURI will return "uri+tokenId"
*/
function setBaseTokenURI(string calldata uri) external;
/**
* @dev set the common prefix for tokens with no extension. Can only be called by owner/admin.
* If configured, and a token has a uri set, tokenURI will return "prefixURI+tokenURI"
* Useful if you want to use ipfs/arweave
*/
function setTokenURIPrefix(string calldata prefix) external;
/**
* @dev set the tokenURI of a token with no extension. Can only be called by owner/admin.
*/
function setTokenURI(uint256 tokenId, string calldata uri) external;
/**
* @dev set the tokenURI of multiple tokens with no extension. Can only be called by owner/admin.
*/
function setTokenURI(uint256[] memory tokenIds, string[] calldata uris) external;
/**
* @dev set a permissions contract for an extension. Used to control minting.
*/
function setMintPermissions(address extension, address permissions) external;
/**
* @dev Configure so transfers of tokens created by the caller (must be extension) gets approval
* from the extension before transferring
*/
function setApproveTransferExtension(bool enabled) external;
/**
* @dev get the extension of a given token
*/
function tokenExtension(uint256 tokenId) external view returns (address);
/**
* @dev Set default royalties
*/
function setRoyalties(address payable[] calldata receivers, uint256[] calldata basisPoints) external;
/**
* @dev Set royalties of a token
*/
function setRoyalties(uint256 tokenId, address payable[] calldata receivers, uint256[] calldata basisPoints) external;
/**
* @dev Set royalties of an extension
*/
function setRoyaltiesExtension(address extension, address payable[] calldata receivers, uint256[] calldata basisPoints) external;
/**
* @dev Get royalites of a token. Returns list of receivers and basisPoints
*/
function getRoyalties(uint256 tokenId) external view returns (address payable[] memory, uint256[] memory);
// Royalty support for various other standards
function getFeeRecipients(uint256 tokenId) external view returns (address payable[] memory);
function getFeeBps(uint256 tokenId) external view returns (uint[] memory);
function getFees(uint256 tokenId) external view returns (address payable[] memory, uint256[] memory);
function royaltyInfo(uint256 tokenId, uint256 value) external view returns (address, uint256);
/**
* @dev Set the default approve transfer contract location.
*/
function setApproveTransfer(address extension) external;
/**
* @dev Get the default approve transfer contract location.
*/
function getApproveTransfer() external view returns (address);
}
// File @manifoldxyz/creator-core-solidity/contracts/extensions/ICreatorExtensionRoyalties.sol@v3.0.0
/**
* @dev Implement this if you want your extension to have overloadable royalties
*/
interface ICreatorExtensionRoyalties is IERC165 {
/**
* Get the royalties for a given creator/tokenId
*/
function getRoyalties(address creator, uint256 tokenId) external view returns (address payable[] memory, uint256[] memory);
}
// File @manifoldxyz/creator-core-solidity/contracts/extensions/ICreatorExtensionTokenURI.sol@v3.0.0
/**
* @dev Implement this if you want your extension to have overloadable URI's
*/
interface ICreatorExtensionTokenURI is IERC165 {
/**
* Get the uri for a given creator/tokenId
*/
function tokenURI(address creator, uint256 tokenId) external view returns (string memory);
}
// File @openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol@v4.8.2
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// File @openzeppelin/contracts/security/ReentrancyGuard.sol@v4.8.2
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File @openzeppelin/contracts/utils/introspection/ERC165.sol@v4.8.2
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File @openzeppelin/contracts/utils/introspection/ERC165Checker.sol@v4.8.2
// OpenZeppelin Contracts (last updated v4.8.2) (utils/introspection/ERC165Checker.sol)
/**
* @dev Library used to query support of an interface declared via {IERC165}.
*
* Note that these functions return the actual result of the query: they do not
* `revert` if an interface is not supported. It is up to the caller to decide
* what to do in these cases.
*/
library ERC165Checker {
// As per the EIP-165 spec, no interface should ever match 0xffffffff
bytes4 private constant _INTERFACE_ID_INVALID = 0xffffffff;
/**
* @dev Returns true if `account` supports the {IERC165} interface.
*/
function supportsERC165(address account) internal view returns (bool) {
// Any contract that implements ERC165 must explicitly indicate support of
// InterfaceId_ERC165 and explicitly indicate non-support of InterfaceId_Invalid
return
supportsERC165InterfaceUnchecked(account, type(IERC165).interfaceId) &&
!supportsERC165InterfaceUnchecked(account, _INTERFACE_ID_INVALID);
}
/**
* @dev Returns true if `account` supports the interface defined by
* `interfaceId`. Support for {IERC165} itself is queried automatically.
*
* See {IERC165-supportsInterface}.
*/
function supportsInterface(address account, bytes4 interfaceId) internal view returns (bool) {
// query support of both ERC165 as per the spec and support of _interfaceId
return supportsERC165(account) && supportsERC165InterfaceUnchecked(account, interfaceId);
}
/**
* @dev Returns a boolean array where each value corresponds to the
* interfaces passed in and whether they're supported or not. This allows
* you to batch check interfaces for a contract where your expectation
* is that some interfaces may not be supported.
*
* See {IERC165-supportsInterface}.
*
* _Available since v3.4._
*/
function getSupportedInterfaces(address account, bytes4[] memory interfaceIds)
internal
view
returns (bool[] memory)
{
// an array of booleans corresponding to interfaceIds and whether they're supported or not
bool[] memory interfaceIdsSupported = new bool[](interfaceIds.length);
// query support of ERC165 itself
if (supportsERC165(account)) {
// query support of each interface in interfaceIds
for (uint256 i = 0; i < interfaceIds.length; i++) {
interfaceIdsSupported[i] = supportsERC165InterfaceUnchecked(account, interfaceIds[i]);
}
}
return interfaceIdsSupported;
}
/**
* @dev Returns true if `account` supports all the interfaces defined in
* `interfaceIds`. Support for {IERC165} itself is queried automatically.
*
* Batch-querying can lead to gas savings by skipping repeated checks for
* {IERC165} support.
*
* See {IERC165-supportsInterface}.
*/
function supportsAllInterfaces(address account, bytes4[] memory interfaceIds) internal view returns (bool) {
// query support of ERC165 itself
if (!supportsERC165(account)) {
return false;
}
// query support of each interface in interfaceIds
for (uint256 i = 0; i < interfaceIds.length; i++) {
if (!supportsERC165InterfaceUnchecked(account, interfaceIds[i])) {
return false;
}
}
// all interfaces supported
return true;
}
/**
* @notice Query if a contract implements an interface, does not check ERC165 support
* @param account The address of the contract to query for support of an interface
* @param interfaceId The interface identifier, as specified in ERC-165
* @return true if the contract at account indicates support of the interface with
* identifier interfaceId, false otherwise
* @dev Assumes that account contains a contract that supports ERC165, otherwise
* the behavior of this method is undefined. This precondition can be checked
* with {supportsERC165}.
*
* Some precompiled contracts will falsely indicate support for a given interface, so caution
* should be exercised when using this function.
*
* Interface identification is specified in ERC-165.
*/
function supportsERC165InterfaceUnchecked(address account, bytes4 interfaceId) internal view returns (bool) {
// prepare call
bytes memory encodedParams = abi.encodeWithSelector(IERC165.supportsInterface.selector, interfaceId);
// perform static call
bool success;
uint256 returnSize;
uint256 returnValue;
assembly {
success := staticcall(30000, account, add(encodedParams, 0x20), mload(encodedParams), 0x00, 0x20)
returnSize := returndatasize()
returnValue := mload(0x00)
}
return success && returnSize >= 0x20 && returnValue > 0;
}
}
// File @openzeppelin/contracts/utils/math/Math.sol@v4.8.2
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10**64) {
value /= 10**64;
result += 64;
}
if (value >= 10**32) {
value /= 10**32;
result += 32;
}
if (value >= 10**16) {
value /= 10**16;
result += 16;
}
if (value >= 10**8) {
value /= 10**8;
result += 8;
}
if (value >= 10**4) {
value /= 10**4;
result += 4;
}
if (value >= 10**2) {
value /= 10**2;
result += 2;
}
if (value >= 10**1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
}
// File @openzeppelin/contracts/utils/Strings.sol@v4.8.2
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = Math.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, Math.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// File @openzeppelin/contracts/utils/structs/EnumerableSet.sol@v4.8.2
// OpenZeppelin Contracts (last updated v4.8.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*
* [WARNING]
* ====
* Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
* unusable.
* See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
*
* In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
* array of EnumerableSet.
* ====
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastValue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastValue;
// Update the index for the moved value
set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
bytes32[] memory store = _values(set._inner);
bytes32[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
}
// File @manifoldxyz/creator-core-solidity/contracts/core/CreatorCore.sol@v3.0.0
/**
* @dev Core creator implementation
*/
abstract contract CreatorCore is ReentrancyGuard, ICreatorCore, ERC165 {
using Strings for uint256;
using EnumerableSet for EnumerableSet.AddressSet;
using AddressUpgradeable for address;
uint256 internal _tokenCount = 0;
// Base approve transfers address location
address internal _approveTransferBase;
// Track registered extensions data
EnumerableSet.AddressSet internal _extensions;
EnumerableSet.AddressSet internal _blacklistedExtensions;
// The baseURI for a given extension
mapping (address => string) private _extensionBaseURI;
mapping (address => bool) private _extensionBaseURIIdentical;
// The prefix for any tokens with a uri configured
mapping (address => string) private _extensionURIPrefix;
// Mapping for individual token URIs
mapping (uint256 => string) internal _tokenURIs;
// Royalty configurations
struct RoyaltyConfig {
address payable receiver;
uint16 bps;
}
mapping (address => RoyaltyConfig[]) internal _extensionRoyalty;
mapping (uint256 => RoyaltyConfig[]) internal _tokenRoyalty;
bytes4 private constant _CREATOR_CORE_V1 = 0x28f10a21;
/**
* External interface identifiers for royalties
*/
/**
* @dev CreatorCore
*
* bytes4(keccak256('getRoyalties(uint256)')) == 0xbb3bafd6
*
* => 0xbb3bafd6 = 0xbb3bafd6
*/
bytes4 private constant _INTERFACE_ID_ROYALTIES_CREATORCORE = 0xbb3bafd6;
/**
* @dev Rarible: RoyaltiesV1
*
* bytes4(keccak256('getFeeRecipients(uint256)')) == 0xb9c4d9fb
* bytes4(keccak256('getFeeBps(uint256)')) == 0x0ebd4c7f
*
* => 0xb9c4d9fb ^ 0x0ebd4c7f = 0xb7799584
*/
bytes4 private constant _INTERFACE_ID_ROYALTIES_RARIBLE = 0xb7799584;
/**
* @dev Foundation
*
* bytes4(keccak256('getFees(uint256)')) == 0xd5a06d4c
*
* => 0xd5a06d4c = 0xd5a06d4c
*/
bytes4 private constant _INTERFACE_ID_ROYALTIES_FOUNDATION = 0xd5a06d4c;
/**
* @dev EIP-2981
*
* bytes4(keccak256("royaltyInfo(uint256,uint256)")) == 0x2a55205a
*
* => 0x2a55205a = 0x2a55205a
*/
bytes4 private constant _INTERFACE_ID_ROYALTIES_EIP2981 = 0x2a55205a;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(ICreatorCore).interfaceId || interfaceId == _CREATOR_CORE_V1 || super.supportsInterface(interfaceId)
|| interfaceId == _INTERFACE_ID_ROYALTIES_CREATORCORE || interfaceId == _INTERFACE_ID_ROYALTIES_RARIBLE
|| interfaceId == _INTERFACE_ID_ROYALTIES_FOUNDATION || interfaceId == _INTERFACE_ID_ROYALTIES_EIP2981;
}
/**
* @dev Only allows registered extensions to call the specified function
*/
function requireExtension() internal view {
require(_extensions.contains(msg.sender), "Must be registered extension");
}
/**
* @dev Only allows non-blacklisted extensions
*/
function requireNonBlacklist(address extension) internal view {
require(!_blacklistedExtensions.contains(extension), "Extension blacklisted");
}
/**
* @dev See {ICreatorCore-getExtensions}.
*/
function getExtensions() external view override returns (address[] memory extensions) {
extensions = new address[](_extensions.length());
for (uint i; i < _extensions.length();) {
extensions[i] = _extensions.at(i);
unchecked { ++i; }
}
return extensions;
}
/**
* @dev Register an extension
*/
function _registerExtension(address extension, string calldata baseURI, bool baseURIIdentical) internal virtual {
require(extension != address(this) && extension.isContract(), "Invalid");
emit ExtensionRegistered(extension, msg.sender);
_extensionBaseURI[extension] = baseURI;
_extensionBaseURIIdentical[extension] = baseURIIdentical;
_extensions.add(extension);
_setApproveTransferExtension(extension, true);
}
/**
* @dev See {ICreatorCore-setApproveTransferExtension}.
*/
function setApproveTransferExtension(bool enabled) external override {
requireExtension();
_setApproveTransferExtension(msg.sender, enabled);
}
/**
* @dev Set whether or not tokens minted by the extension defers transfer approvals to the extension
*/
function _setApproveTransferExtension(address extension, bool enabled) internal virtual;
/**
* @dev Unregister an extension
*/
function _unregisterExtension(address extension) internal {
emit ExtensionUnregistered(extension, msg.sender);
_extensions.remove(extension);
}
/**
* @dev Blacklist an extension
*/
function _blacklistExtension(address extension) internal {
require(extension != address(0) && extension != address(this), "Cannot blacklist yourself");
if (_extensions.contains(extension)) {
emit ExtensionUnregistered(extension, msg.sender);
_extensions.remove(extension);
}
if (!_blacklistedExtensions.contains(extension)) {
emit ExtensionBlacklisted(extension, msg.sender);
_blacklistedExtensions.add(extension);
}
}
/**
* @dev Set base token uri for an extension
*/
function _setBaseTokenURIExtension(string calldata uri, bool identical) internal {
_extensionBaseURI[msg.sender] = uri;
_extensionBaseURIIdentical[msg.sender] = identical;
}
/**
* @dev Set token uri prefix for an extension
*/
function _setTokenURIPrefixExtension(string calldata prefix) internal {
_extensionURIPrefix[msg.sender] = prefix;
}
/**
* @dev Set token uri for a token of an extension
*/
function _setTokenURIExtension(uint256 tokenId, string calldata uri) internal {
require(_tokenExtension(tokenId) == msg.sender, "Invalid token");
_tokenURIs[tokenId] = uri;
}
/**
* @dev Set base token uri for tokens with no extension
*/
function _setBaseTokenURI(string calldata uri) internal {
_extensionBaseURI[address(0)] = uri;
}
/**
* @dev Set token uri prefix for tokens with no extension
*/
function _setTokenURIPrefix(string calldata prefix) internal {
_extensionURIPrefix[address(0)] = prefix;
}
/**
* @dev Set token uri for a token with no extension
*/
function _setTokenURI(uint256 tokenId, string calldata uri) internal {
require(tokenId > 0 && tokenId <= _tokenCount && _tokenExtension(tokenId) == address(0), "Invalid token");
_tokenURIs[tokenId] = uri;
}
/**
* @dev Retrieve a token's URI
*/
function _tokenURI(uint256 tokenId) internal view returns (string memory) {
require(tokenId > 0 && tokenId <= _tokenCount, "Invalid token");
address extension = _tokenExtension(tokenId);
require(!_blacklistedExtensions.contains(extension), "Extension blacklisted");
if (bytes(_tokenURIs[tokenId]).length != 0) {
if (bytes(_extensionURIPrefix[extension]).length != 0) {
return string(abi.encodePacked(_extensionURIPrefix[extension], _tokenURIs[tokenId]));
}
return _tokenURIs[tokenId];
}
if (ERC165Checker.supportsInterface(extension, type(ICreatorExtensionTokenURI).interfaceId)) {
return ICreatorExtensionTokenURI(extension).tokenURI(address(this), tokenId);
}
if (!_extensionBaseURIIdentical[extension]) {
return string(abi.encodePacked(_extensionBaseURI[extension], tokenId.toString()));
} else {
return _extensionBaseURI[extension];
}
}
/**
* Helper to get royalties for a token
*/
function _getRoyalties(uint256 tokenId) view internal returns (address payable[] memory receivers, uint256[] memory bps) {
// Get token level royalties
RoyaltyConfig[] memory royalties = _tokenRoyalty[tokenId];
if (royalties.length == 0) {
// Get extension specific royalties
address extension = _tokenExtension(tokenId);
if (extension != address(0)) {
if (ERC165Checker.supportsInterface(extension, type(ICreatorExtensionRoyalties).interfaceId)) {
(receivers, bps) = ICreatorExtensionRoyalties(extension).getRoyalties(address(this), tokenId);
// Extension override exists, just return that
if (receivers.length > 0) return (receivers, bps);
}
royalties = _extensionRoyalty[extension];
}
}
if (royalties.length == 0) {
// Get the default royalty
royalties = _extensionRoyalty[address(0)];
}
if (royalties.length > 0) {
receivers = new address payable[](royalties.length);
bps = new uint256[](royalties.length);
for (uint i; i < royalties.length;) {
receivers[i] = royalties[i].receiver;
bps[i] = royalties[i].bps;
unchecked { ++i; }
}
}
}
/**
* Helper to get royalty receivers for a token
*/
function _getRoyaltyReceivers(uint256 tokenId) view internal returns (address payable[] memory recievers) {
(recievers, ) = _getRoyalties(tokenId);
}
/**
* Helper to get royalty basis points for a token
*/
function _getRoyaltyBPS(uint256 tokenId) view internal returns (uint256[] memory bps) {
(, bps) = _getRoyalties(tokenId);
}
function _getRoyaltyInfo(uint256 tokenId, uint256 value) view internal returns (address receiver, uint256 amount){
(address payable[] memory receivers, uint256[] memory bps) = _getRoyalties(tokenId);
require(receivers.length <= 1, "More than 1 royalty receiver");
if (receivers.length == 0) {
return (address(this), 0);
}
return (receivers[0], bps[0]*value/10000);
}
/**
* Set royalties for a token
*/
function _setRoyalties(uint256 tokenId, address payable[] calldata receivers, uint256[] calldata basisPoints) internal {
_checkRoyalties(receivers, basisPoints);
delete _tokenRoyalty[tokenId];
_setRoyalties(receivers, basisPoints, _tokenRoyalty[tokenId]);
emit RoyaltiesUpdated(tokenId, receivers, basisPoints);
}
/**
* Set royalties for all tokens of an extension
*/
function _setRoyaltiesExtension(address extension, address payable[] calldata receivers, uint256[] calldata basisPoints) internal {
_checkRoyalties(receivers, basisPoints);
delete _extensionRoyalty[extension];
_setRoyalties(receivers, basisPoints, _extensionRoyalty[extension]);
if (extension == address(0)) {
emit DefaultRoyaltiesUpdated(receivers, basisPoints);
} else {
emit ExtensionRoyaltiesUpdated(extension, receivers, basisPoints);
}
}
/**
* Helper function to check that royalties provided are valid
*/
function _checkRoyalties(address payable[] calldata receivers, uint256[] calldata basisPoints) private pure {
require(receivers.length == basisPoints.length, "Invalid input");
uint256 totalBasisPoints;
for (uint i; i < basisPoints.length;) {
totalBasisPoints += basisPoints[i];
unchecked { ++i; }
}
require(totalBasisPoints < 10000, "Invalid total royalties");
}
/**
* Helper function to set royalties
*/
function _setRoyalties(address payable[] calldata receivers, uint256[] calldata basisPoints, RoyaltyConfig[] storage royalties) private {
for (uint i; i < basisPoints.length;) {
royalties.push(
RoyaltyConfig(
{
receiver: receivers[i],
bps: uint16(basisPoints[i])
}
)
);
unchecked { ++i; }
}
}
/**
* @dev Set the base contract's approve transfer contract location
*/
function _setApproveTransferBase(address extension) internal {
_approveTransferBase = extension;
emit ApproveTransferUpdated(extension);
}
/**
* @dev See {ICreatorCore-getApproveTransfer}.
*/
function getApproveTransfer() external view override returns (address) {
return _approveTransferBase;
}
/**
* @dev Get the extension for the given token
*/
function _tokenExtension(uint256 tokenId) internal virtual view returns(address);
}
// File @manifoldxyz/creator-core-solidity/contracts/core/IERC1155CreatorCore.sol@v3.0.0
/**
* @dev Core ERC1155 creator interface
*/
interface IERC1155CreatorCore is ICreatorCore {
/**
* @dev mint a token with no extension. Can only be called by an admin.
*
* @param to - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
* @param amounts - Can be a single element array (all recipients get the same amount) or a multi-element array
* @param uris - If no elements, all tokens use the default uri.
* If any element is an empty string, the corresponding token uses the default uri.
*
*
* Requirements: If to is a multi-element array, then uris must be empty or single element array
* If to is a multi-element array, then amounts must be a single element array or a multi-element array of the same size
* If to is a single element array, uris must be empty or the same length as amounts
*
* Examples:
* mintBaseNew(['0x....1', '0x....2'], [1], [])
* Mints a single new token, and gives 1 each to '0x....1' and '0x....2'. Token uses default uri.
*
* mintBaseNew(['0x....1', '0x....2'], [1, 2], [])
* Mints a single new token, and gives 1 to '0x....1' and 2 to '0x....2'. Token uses default uri.
*
* mintBaseNew(['0x....1'], [1, 2], ["", "http://token2.com"])
* Mints two new tokens to '0x....1'. 1 of the first token, 2 of the second. 1st token uses default uri, second uses "http://token2.com".
*
* @return Returns list of tokenIds minted
*/
function mintBaseNew(address[] calldata to, uint256[] calldata amounts, string[] calldata uris) external returns (uint256[] memory);
/**
* @dev batch mint existing token with no extension. Can only be called by an admin.
*
* @param to - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
* @param tokenIds - Can be a single element array (all recipients get the same token) or a multi-element array
* @param amounts - Can be a single element array (all recipients get the same amount) or a multi-element array
*
* Requirements: If any of the parameters are multi-element arrays, they need to be the same length as other multi-element arrays
*
* Examples:
* mintBaseExisting(['0x....1', '0x....2'], [1], [10])
* Mints 10 of tokenId 1 to each of '0x....1' and '0x....2'.
*
* mintBaseExisting(['0x....1', '0x....2'], [1, 2], [10, 20])
* Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 2 to '0x....2'.
*
* mintBaseExisting(['0x....1'], [1, 2], [10, 20])
* Mints 10 of tokenId 1 and 20 of tokenId 2 to '0x....1'.
*
* mintBaseExisting(['0x....1', '0x....2'], [1], [10, 20])
* Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 1 to '0x....2'.
*
*/
function mintBaseExisting(address[] calldata to, uint256[] calldata tokenIds, uint256[] calldata amounts) external;
/**
* @dev mint a token from an extension. Can only be called by a registered extension.
*
* @param to - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
* @param amounts - Can be a single element array (all recipients get the same amount) or a multi-element array
* @param uris - If no elements, all tokens use the default uri.
* If any element is an empty string, the corresponding token uses the default uri.
*
*
* Requirements: If to is a multi-element array, then uris must be empty or single element array
* If to is a multi-element array, then amounts must be a single element array or a multi-element array of the same size
* If to is a single element array, uris must be empty or the same length as amounts
*
* Examples:
* mintExtensionNew(['0x....1', '0x....2'], [1], [])
* Mints a single new token, and gives 1 each to '0x....1' and '0x....2'. Token uses default uri.
*
* mintExtensionNew(['0x....1', '0x....2'], [1, 2], [])
* Mints a single new token, and gives 1 to '0x....1' and 2 to '0x....2'. Token uses default uri.
*
* mintExtensionNew(['0x....1'], [1, 2], ["", "http://token2.com"])
* Mints two new tokens to '0x....1'. 1 of the first token, 2 of the second. 1st token uses default uri, second uses "http://token2.com".
*
* @return Returns list of tokenIds minted
*/
function mintExtensionNew(address[] calldata to, uint256[] calldata amounts, string[] calldata uris) external returns (uint256[] memory);
/**
* @dev batch mint existing token from extension. Can only be called by a registered extension.
*
* @param to - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
* @param tokenIds - Can be a single element array (all recipients get the same token) or a multi-element array
* @param amounts - Can be a single element array (all recipients get the same amount) or a multi-element array
*
* Requirements: If any of the parameters are multi-element arrays, they need to be the same length as other multi-element arrays
*
* Examples:
* mintExtensionExisting(['0x....1', '0x....2'], [1], [10])
* Mints 10 of tokenId 1 to each of '0x....1' and '0x....2'.
*
* mintExtensionExisting(['0x....1', '0x....2'], [1, 2], [10, 20])
* Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 2 to '0x....2'.
*
* mintExtensionExisting(['0x....1'], [1, 2], [10, 20])
* Mints 10 of tokenId 1 and 20 of tokenId 2 to '0x....1'.
*
* mintExtensionExisting(['0x....1', '0x....2'], [1], [10, 20])
* Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 1 to '0x....2'.
*
*/
function mintExtensionExisting(address[] calldata to, uint256[] calldata tokenIds, uint256[] calldata amounts) external;
/**
* @dev burn tokens. Can only be called by token owner or approved address.
* On burn, calls back to the registered extension's onBurn method
*/
function burn(address account, uint256[] calldata tokenIds, uint256[] calldata amounts) external;
/**
* @dev Total amount of tokens in with a given tokenId.
*/
function totalSupply(uint256 tokenId) external view returns (uint256);
}
// File @manifoldxyz/libraries-solidity/contracts/access/IAdminControl.sol@v1.0.4
/**
* @dev Interface for admin control
*/
interface IAdminControl is IERC165 {
event AdminApproved(address indexed account, address indexed sender);
event AdminRevoked(address indexed account, address indexed sender);
/**
* @dev gets address of all admins
*/
function getAdmins() external view returns (address[] memory);
/**
* @dev add an admin. Can only be called by contract owner.
*/
function approveAdmin(address admin) external;
/**
* @dev remove an admin. Can only be called by contract owner.
*/
function revokeAdmin(address admin) external;
/**
* @dev checks whether or not given address is an admin
* Returns True if they are
*/
function isAdmin(address admin) external view returns (bool);
}
// File @openzeppelin/contracts/utils/Context.sol@v4.8.2
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File @openzeppelin/contracts/access/Ownable.sol@v4.8.2
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File @manifoldxyz/libraries-solidity/contracts/access/AdminControl.sol@v1.0.4
abstract contract AdminControl is Ownable, IAdminControl, ERC165 {
using EnumerableSet for EnumerableSet.AddressSet;
// Track registered admins
EnumerableSet.AddressSet private _admins;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IAdminControl).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev Only allows approved admins to call the specified function
*/
modifier adminRequired() {
require(owner() == msg.sender || _admins.contains(msg.sender), "AdminControl: Must be owner or admin");
_;
}
/**
* @dev See {IAdminControl-getAdmins}.
*/
function getAdmins() external view override returns (address[] memory admins) {
admins = new address[](_admins.length());
for (uint i = 0; i < _admins.length(); i++) {
admins[i] = _admins.at(i);
}
return admins;
}
/**
* @dev See {IAdminControl-approveAdmin}.
*/
function approveAdmin(address admin) external override onlyOwner {
if (!_admins.contains(admin)) {
emit AdminApproved(admin, msg.sender);
_admins.add(admin);
}
}
/**
* @dev See {IAdminControl-revokeAdmin}.
*/
function revokeAdmin(address admin) external override onlyOwner {
if (_admins.contains(admin)) {
emit AdminRevoked(admin, msg.sender);
_admins.remove(admin);
}
}
/**
* @dev See {IAdminControl-isAdmin}.
*/
function isAdmin(address admin) public override view returns (bool) {
return (owner() == admin || _admins.contains(admin));
}
}
// File contracts/interfaces/ILazyPayableClaim.sol
/// @author: uwu Labs
/**
* Collectr Extension Claim interface
*/
interface ILazyPayableClaim {
enum StorageProtocol { INVALID, NONE, ARWEAVE, IPFS }
event ClaimInitialized(address indexed creatorContract, uint256 indexed instanceId, address initializer);
event ClaimUpdated(address indexed creatorContract, uint256 indexed instanceId);
event ClaimMint(address indexed creatorContract, uint256 indexed instanceId);
/**
* @notice Withdraw funds
*/
function withdraw(address payable receiver, uint256 amount) external;
}
// File contracts/interfaces/ICollectrV1.sol
/// @author: uwu Labs
/**
* Lazy Claim interface
*/
interface ICollectrV1 is ILazyPayableClaim {
struct ClaimParameters {
uint256 totalMax;
uint256 walletMax;
uint48 startDate;
uint48 endDate;
string location;
uint256 cost;
}
struct Claim {
uint256 total;
uint256 totalMax;
uint256 walletMax;
uint48 startDate;
uint48 endDate;
string location;
uint256 tokenId;
uint256 cost;
}
/**
* @notice update array of Payment Receiver structs
* @param instanceId the claim instanceId for the creator contract
* @param _paymentAddresses the array of addresses
* @param _paymentSplits the array of royalty splits
*/
function updatePaymentReceivers(
uint256 instanceId,
address[] calldata _paymentAddresses,
uint256[] calldata _paymentSplits
) external;
/**
* @notice initialize a new claim, emit initialize event
* @param instanceId the claim instanceId for the creator contract
* @param claimParameters the parameters which will affect the minting behavior of the claim
* @param _paymentAddresses the array of addresses
* @param _paymentSplits the array of royalty splits
*/
function initializeClaim(
uint256 instanceId,
ClaimParameters calldata claimParameters,
address[] calldata _paymentAddresses,
uint256[] calldata _paymentSplits
) external;
/**
* @notice update an existing claim at instanceId
* @param instanceId the claim instanceId for the creator contract
* @param claimParameters the parameters which will affect the minting behavior of the claim
*/
function updateClaim(uint256 instanceId, ClaimParameters calldata claimParameters) external;
/**
* @notice update tokenURI parameters for an existing claim at instanceId
* @param instanceId the claim instanceId for the creator contract
* @param location the new location
*/
function updateTokenURIParams(uint256 instanceId, string calldata location) external;
/**
* @notice get a claim corresponding to a creator contract and instanceId
* @param instanceId the claim instanceId for the creator contract
* @return the claim object
*/
function getClaim(uint256 instanceId) external view returns(Claim memory);
/**
* @notice get a claim corresponding to a token
* @param tokenId the tokenId of the claim
* @return the claim instanceId and claim object
*/
function getClaimForToken(uint256 tokenId) external view returns(uint256, Claim memory);
/**
* @notice allow admin to airdrop arbitrary tokens
* @param instanceId the claim instanceId for the creator contract
* @param recipients addresses to airdrop to
*/
function airdrop(uint256 instanceId, address[] calldata recipients, uint256[] calldata amounts) external;
}
// File contracts/LazyPayableClaim.sol
// solhint-disable reason-string
/**
* @title Collectr Extension Claim
* @author uwu Labs
*/
contract LazyPayableClaim is ILazyPayableClaim, AdminControl {
string internal constant ARWEAVE_PREFIX = "https://arweave.net/";
string internal constant IPFS_PREFIX = "ipfs://";
uint256 internal constant MINT_INDEX_BITMASK = 0xFF;
// solhint-disable-next-line
uint256 internal constant SPLIT_DENOMINATOR = 100000;
uint256 internal constant MAX_UINT_24 = 0xffffff;
uint256 internal constant MAX_UINT_32 = 0xffffffff;
uint256 internal constant MAX_UINT_56 = 0xffffffffffffff;
uint256 internal constant MAX_UINT_256 = 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
address private constant ADDRESS_ZERO = 0x0000000000000000000000000000000000000000;
// {{instanceId => { walletAddress => walletMints }}
mapping(uint256 => mapping(address => uint256)) internal _mintsPerWallet;
struct PaymentReceiver {
address paymentAddress;
uint256 paymentSplit;
}
constructor() {}
/**
* See {ILazyPayableClaim-withdraw}.
*/
function withdraw(address payable receiver, uint256 amount) external override adminRequired {
(bool sent, ) = receiver.call{value: amount}("");
require(sent, "Failed to transfer to receiver");
}
function _transferFunds(uint256 cost, PaymentReceiver[] memory paymentReceivers) internal {
// Check price
require(msg.value >= cost, "Invalid amount");
//split payment
for(uint i=0; i < paymentReceivers.length; i++) {
// solhint-disable-next-line
(bool sent, ) = paymentReceivers[i].paymentAddress.call{value: (cost * paymentReceivers[i].paymentSplit) / SPLIT_DENOMINATOR}("");
require(sent, "Failed to transfer to receiver");
}
}
function _validateMint(address receiver, uint256 instanceId, uint256 walletMax, uint256 startDate, uint256 endDate) internal {
// Check timestamps
require(
(startDate <= block.timestamp) &&
(endDate == 0 || endDate >= block.timestamp),
"Claim inactive"
);
require(++_mintsPerWallet[instanceId][receiver] <= walletMax, "Maximum tokens already minted for this wallet");
}
function _getTotalMints(address minter, uint256 instanceId) internal view returns(uint256) {
return uint256(_mintsPerWallet[instanceId][minter]);
}
}
// File contracts/CollectrV1.sol
/**
* @title Collectr
* @author uwu Labs
* Based on Manifold's LazyPayableClaim
*/
contract CollectrV1 is
IERC165,
ICollectrV1,
LazyPayableClaim
{
using Strings for uint256;
address immutable collectrNFT1155;
// stores mapping from contractAddress/instanceId to the claim it represents
// { instanceId => Claim }
mapping(uint256 => Claim) private _claims;
// { tokenId => { instanceId }
mapping(uint256 => uint256) private _claimTokenIds;
// { instanceId => Receivers }
mapping(uint256 => PaymentReceiver[]) public _paymentReceivers;
function supportsInterface(
bytes4 interfaceId
) public view virtual override(IERC165, AdminControl) returns (bool) {
return
interfaceId == type(ICollectrV1).interfaceId ||
interfaceId == type(ILazyPayableClaim).interfaceId ||
interfaceId == type(IAdminControl).interfaceId ||
interfaceId == type(IERC165).interfaceId;
}
constructor(
address _collectrNFT1155
) {
collectrNFT1155 = _collectrNFT1155;
}
function updatePaymentReceivers(
uint256 instanceId,
address[] calldata _paymentAddresses,
uint256[] calldata _paymentSplits
) external override adminRequired
{
Claim memory claim = _claims[instanceId];
require(
bytes(claim.location).length != 0,
"Claim not initialized"
);
require(_paymentAddresses.length == _paymentSplits.length, "Every address needs a matching split");
require(_paymentAddresses.length >= 1 && _paymentAddresses.length <= 12, "Wrong amount of addresses");
// Check if the sum of _paymentSplits equals 100000
uint256 totalSplits = 0;
for (uint256 i = 0; i < _paymentSplits.length; i++) {
totalSplits += _paymentSplits[i];
}
require(totalSplits == SPLIT_DENOMINATOR, "The sum of all splits must equal 100000");
delete _paymentReceivers[instanceId];
for (uint i = 0; i < _paymentAddresses.length; i++) {
_paymentReceivers[instanceId].push(
PaymentReceiver(_paymentAddresses[i], _paymentSplits[i])
);
}
}
/**
* See {IERC1155LazyClaim-initializeClaim}.
*/
function initializeClaim(
uint256 instanceId,
ClaimParameters calldata claimParameters,
address[] calldata _paymentAddresses,
uint256[] calldata _paymentSplits
) external override adminRequired {
// Revert if claim at instanceId already exists
require(
bytes(_claims[instanceId].location).length == 0,
"Claim already initialized"
);
// Sanity checks
require(
bytes(claimParameters.location).length != 0,
"Cannot initialize with empty metadata"
);
require(
claimParameters.endDate == 0 ||
claimParameters.startDate < claimParameters.endDate,
"Cannot have startDate greater than or equal to endDate"
);
require(_paymentAddresses.length == _paymentSplits.length, "Every address needs a matching split");
require(_paymentAddresses.length >= 1 && _paymentAddresses.length <= 12, "Wrong amount of addresses");
// Check if the sum of _paymentSplits equals 100000
uint256 totalSplits = 0;
for (uint256 i = 0; i < _paymentSplits.length; i++) {
totalSplits += _paymentSplits[i];
}
require(totalSplits == SPLIT_DENOMINATOR, "The sum of all splits must equal 100000");
address[] memory receivers = new address[](1);
receivers[0] = msg.sender;
string[] memory uris = new string[](1);
uris[0] = claimParameters.location;
uint256[] memory amounts = new uint256[](1);
uint256[] memory newTokenIds = IERC1155CreatorCore(
collectrNFT1155
).mintExtensionNew(receivers, amounts, uris);
// Create the claim
_claims[instanceId] = Claim({
total: 0,
totalMax: claimParameters.totalMax,
walletMax: claimParameters.walletMax,
startDate: claimParameters.startDate,
endDate: claimParameters.endDate,
location: claimParameters.location,
tokenId: newTokenIds[0],
cost: claimParameters.cost
});
_claimTokenIds[newTokenIds[0]] = instanceId;
// Create Artist struct
for (uint i = 0; i < _paymentAddresses.length; i++) {
_paymentReceivers[instanceId].push(
PaymentReceiver(_paymentAddresses[i], _paymentSplits[i])
);
}
emit ClaimInitialized(collectrNFT1155, instanceId, msg.sender);
}
/**
* See {IERC1155LazyClaim-updateClaim}.
*/
function updateClaim(
uint256 instanceId,
ClaimParameters memory claimParameters
) external override adminRequired {
Claim memory claim = _claims[instanceId];
require(
bytes(claim.location).length != 0,
"Claim not initialized"
);
require(
bytes(claimParameters.location).length != 0,
"Cannot set empty metadata"
);
require(
claimParameters.endDate == 0 ||
claimParameters.startDate < claimParameters.endDate,
"Cannot have startDate greater than or equal to endDate"
);
if (
claimParameters.totalMax != 0 &&
claim.total > claimParameters.totalMax
) {
claimParameters.totalMax = claim.total;
}
// Overwrite the existing claim
_claims[instanceId] = Claim({
total: claim.total,
totalMax: claimParameters.totalMax,
walletMax: claimParameters.walletMax,
startDate: claimParameters.startDate,
endDate: claimParameters.endDate,
location: claimParameters.location,
tokenId: claim.tokenId,
cost: claimParameters.cost
});
// Write the updated metadata to the NFT.
IERC1155CreatorCore(collectrNFT1155).setTokenURIExtension(claim.tokenId, claimParameters.location);
emit ClaimUpdated(collectrNFT1155, instanceId);
}
/**
* See {IERC1155LazyClaim-updateTokenURIParams}.
*/
function updateTokenURIParams(
uint256 instanceId,
string calldata location
) external override adminRequired {
Claim storage claim = _claims[instanceId];
require(
bytes(claim.location).length != 0,
"Claim not initialized"
);
require(
bytes(location).length != 0,
"Cannot set empty metadata"
);
claim.location = location;
emit ClaimUpdated(collectrNFT1155, instanceId);
}
/**
* See {IERC1155LazyClaim-getClaim}.
*/
function getClaim(
uint256 instanceId
) public view override returns (Claim memory claim) {
return _getClaim(instanceId);
}
/**
* See {IERC1155LazyClaim-getClaimForToken}.
*/
function getClaimForToken(
uint256 tokenId
) external view override returns (uint256 instanceId, Claim memory claim) {
instanceId = _claimTokenIds[tokenId];
claim = _getClaim(instanceId);
}
function _getClaim(
uint256 instanceId
) private view returns (Claim storage claim) {
claim = _claims[instanceId];
require(
bytes(claim.location).length != 0,
"Claim not initialized"
);
}
/**
* See {ILazyPayableClaim-getTotalMints}.
*/
function getTotalMints(
address minter,
uint256 instanceId
) external view returns (uint256) {
return _getTotalMints(minter, instanceId);
}
/**
* See {ILazyPayableClaim-mint}.
*/
function mint(
address receiver,
uint256 instanceId
) external payable {
Claim storage claim = _getClaim(instanceId);
PaymentReceiver[] storage paymentReceivers = _paymentReceivers[instanceId];
// If receiver is empty, change to msg.sender.
if (receiver == address(0)) {
receiver = msg.sender;
}
// Check totalMax
require(
++claim.total <= claim.totalMax || claim.totalMax == 0,
"Maximum tokens already minted for this claim"
);
// Validate mint
_validateMint(
receiver,
instanceId,
claim.walletMax,
claim.startDate,
claim.endDate
);
// Transfer funds
_transferFunds(
claim.cost,
paymentReceivers
);
// Do mint
address[] memory recipients = new address[](1);
recipients[0] = receiver;
uint256[] memory amounts = new uint256[](1);
amounts[0] = 1;
_mintClaim(claim, recipients, amounts);
emit ClaimMint(collectrNFT1155, instanceId);
}
/**
* See {IERC1155LazyPayableClaim-airdrop}.
*/
function airdrop(
uint256 instanceId,
address[] calldata recipients,
uint256[] calldata amounts
) external adminRequired {
// Fetch the claim
Claim storage claim = _claims[instanceId];
uint256 totalAmount;
for (uint256 i; i < amounts.length; ) {
totalAmount += amounts[i];
unchecked {
++i;
}
}
require(totalAmount <= MAX_UINT_32, "Too many requested");
require((claim.total + totalAmount) <= claim.totalMax, "Maximum tokens already minted for this claim");
// Airdrop the tokens
_mintClaim(claim, recipients, amounts);
}
/**
* Mint a claim
*/
function _mintClaim(
Claim storage claim,
address[] memory recipients,
uint256[] memory amounts
) private {
uint256[] memory tokenIds = new uint256[](1);
tokenIds[0] = claim.tokenId;
IERC1155CreatorCore(collectrNFT1155).mintExtensionExisting(
recipients,
tokenIds,
amounts
);
}
}
{
"compilationTarget": {
"contracts/CollectrV1.sol": "CollectrV1"
},
"evmVersion": "london",
"libraries": {},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": true,
"runs": 2000
},
"remappings": []
}
[{"inputs":[{"internalType":"address","name":"_collectrNFT1155","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"AdminApproved","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"AdminRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"creatorContract","type":"address"},{"indexed":true,"internalType":"uint256","name":"instanceId","type":"uint256"},{"indexed":false,"internalType":"address","name":"initializer","type":"address"}],"name":"ClaimInitialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"creatorContract","type":"address"},{"indexed":true,"internalType":"uint256","name":"instanceId","type":"uint256"}],"name":"ClaimMint","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"creatorContract","type":"address"},{"indexed":true,"internalType":"uint256","name":"instanceId","type":"uint256"}],"name":"ClaimUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"}],"name":"_paymentReceivers","outputs":[{"internalType":"address","name":"paymentAddress","type":"address"},{"internalType":"uint256","name":"paymentSplit","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"instanceId","type":"uint256"},{"internalType":"address[]","name":"recipients","type":"address[]"},{"internalType":"uint256[]","name":"amounts","type":"uint256[]"}],"name":"airdrop","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"admin","type":"address"}],"name":"approveAdmin","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getAdmins","outputs":[{"internalType":"address[]","name":"admins","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"instanceId","type":"uint256"}],"name":"getClaim","outputs":[{"components":[{"internalType":"uint256","name":"total","type":"uint256"},{"internalType":"uint256","name":"totalMax","type":"uint256"},{"internalType":"uint256","name":"walletMax","type":"uint256"},{"internalType":"uint48","name":"startDate","type":"uint48"},{"internalType":"uint48","name":"endDate","type":"uint48"},{"internalType":"string","name":"location","type":"string"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"uint256","name":"cost","type":"uint256"}],"internalType":"struct ICollectrV1.Claim","name":"claim","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getClaimForToken","outputs":[{"internalType":"uint256","name":"instanceId","type":"uint256"},{"components":[{"internalType":"uint256","name":"total","type":"uint256"},{"internalType":"uint256","name":"totalMax","type":"uint256"},{"internalType":"uint256","name":"walletMax","type":"uint256"},{"internalType":"uint48","name":"startDate","type":"uint48"},{"internalType":"uint48","name":"endDate","type":"uint48"},{"internalType":"string","name":"location","type":"string"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"uint256","name":"cost","type":"uint256"}],"internalType":"struct ICollectrV1.Claim","name":"claim","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"minter","type":"address"},{"internalType":"uint256","name":"instanceId","type":"uint256"}],"name":"getTotalMints","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"instanceId","type":"uint256"},{"components":[{"internalType":"uint256","name":"totalMax","type":"uint256"},{"internalType":"uint256","name":"walletMax","type":"uint256"},{"internalType":"uint48","name":"startDate","type":"uint48"},{"internalType":"uint48","name":"endDate","type":"uint48"},{"internalType":"string","name":"location","type":"string"},{"internalType":"uint256","name":"cost","type":"uint256"}],"internalType":"struct ICollectrV1.ClaimParameters","name":"claimParameters","type":"tuple"},{"internalType":"address[]","name":"_paymentAddresses","type":"address[]"},{"internalType":"uint256[]","name":"_paymentSplits","type":"uint256[]"}],"name":"initializeClaim","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"admin","type":"address"}],"name":"isAdmin","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"instanceId","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"admin","type":"address"}],"name":"revokeAdmin","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"instanceId","type":"uint256"},{"components":[{"internalType":"uint256","name":"totalMax","type":"uint256"},{"internalType":"uint256","name":"walletMax","type":"uint256"},{"internalType":"uint48","name":"startDate","type":"uint48"},{"internalType":"uint48","name":"endDate","type":"uint48"},{"internalType":"string","name":"location","type":"string"},{"internalType":"uint256","name":"cost","type":"uint256"}],"internalType":"struct ICollectrV1.ClaimParameters","name":"claimParameters","type":"tuple"}],"name":"updateClaim","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"instanceId","type":"uint256"},{"internalType":"address[]","name":"_paymentAddresses","type":"address[]"},{"internalType":"uint256[]","name":"_paymentSplits","type":"uint256[]"}],"name":"updatePaymentReceivers","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"instanceId","type":"uint256"},{"internalType":"string","name":"location","type":"string"}],"name":"updateTokenURIParams","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address payable","name":"receiver","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]