// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/structs/DoubleEndedQueue.sol)
pragma solidity ^0.8.20;

/**
 * @dev A sequence of items with the ability to efficiently push and pop items (i.e. insert and remove) on both ends of
 * the sequence (called front and back). Among other access patterns, it can be used to implement efficient LIFO and
 * FIFO queues. Storage use is optimized, and all operations are O(1) constant time. This includes {clear}, given that
 * the existing queue contents are left in storage.
 *
 * The struct is called `Bytes32Deque`. Other types can be cast to and from `bytes32`. This data structure can only be
 * used in storage, and not in memory.
 * ```solidity
 * DoubleEndedQueue.Bytes32Deque queue;
 * ```
 */
library DoubleEndedQueue {
    /**
     * @dev An operation (e.g. {front}) couldn't be completed due to the queue being empty.
     */
    error QueueEmpty();

    /**
     * @dev A push operation couldn't be completed due to the queue being full.
     */
    error QueueFull();

    /**
     * @dev An operation (e.g. {at}) couldn't be completed due to an index being out of bounds.
     */
    error QueueOutOfBounds();

    /**
     * @dev Indices are 128 bits so begin and end are packed in a single storage slot for efficient access.
     *
     * Struct members have an underscore prefix indicating that they are "private" and should not be read or written to
     * directly. Use the functions provided below instead. Modifying the struct manually may violate assumptions and
     * lead to unexpected behavior.
     *
     * The first item is at data[begin] and the last item is at data[end - 1]. This range can wrap around.
     */
    struct Bytes32Deque {
        uint128 _begin;
        uint128 _end;
        mapping(uint128 index => bytes32) _data;
    }

    /**
     * @dev Inserts an item at the end of the queue.
     *
     * Reverts with {QueueFull} if the queue is full.
     */
    function pushBack(Bytes32Deque storage deque, bytes32 value) internal {
        unchecked {
            uint128 backIndex = deque._end;
            if (backIndex + 1 == deque._begin) revert QueueFull();
            deque._data[backIndex] = value;
            deque._end = backIndex + 1;
        }
    }

    /**
     * @dev Removes the item at the end of the queue and returns it.
     *
     * Reverts with {QueueEmpty} if the queue is empty.
     */
    function popBack(Bytes32Deque storage deque) internal returns (bytes32 value) {
        unchecked {
            uint128 backIndex = deque._end;
            if (backIndex == deque._begin) revert QueueEmpty();
            --backIndex;
            value = deque._data[backIndex];
            delete deque._data[backIndex];
            deque._end = backIndex;
        }
    }

    /**
     * @dev Inserts an item at the beginning of the queue.
     *
     * Reverts with {QueueFull} if the queue is full.
     */
    function pushFront(Bytes32Deque storage deque, bytes32 value) internal {
        unchecked {
            uint128 frontIndex = deque._begin - 1;
            if (frontIndex == deque._end) revert QueueFull();
            deque._data[frontIndex] = value;
            deque._begin = frontIndex;
        }
    }

    /**
     * @dev Removes the item at the beginning of the queue and returns it.
     *
     * Reverts with `QueueEmpty` if the queue is empty.
     */
    function popFront(Bytes32Deque storage deque) internal returns (bytes32 value) {
        unchecked {
            uint128 frontIndex = deque._begin;
            if (frontIndex == deque._end) revert QueueEmpty();
            value = deque._data[frontIndex];
            delete deque._data[frontIndex];
            deque._begin = frontIndex + 1;
        }
    }

    /**
     * @dev Returns the item at the beginning of the queue.
     *
     * Reverts with `QueueEmpty` if the queue is empty.
     */
    function front(Bytes32Deque storage deque) internal view returns (bytes32 value) {
        if (empty(deque)) revert QueueEmpty();
        return deque._data[deque._begin];
    }

    /**
     * @dev Returns the item at the end of the queue.
     *
     * Reverts with `QueueEmpty` if the queue is empty.
     */
    function back(Bytes32Deque storage deque) internal view returns (bytes32 value) {
        if (empty(deque)) revert QueueEmpty();
        unchecked {
            return deque._data[deque._end - 1];
        }
    }

    /**
     * @dev Return the item at a position in the queue given by `index`, with the first item at 0 and last item at
     * `length(deque) - 1`.
     *
     * Reverts with `QueueOutOfBounds` if the index is out of bounds.
     */
    function at(Bytes32Deque storage deque, uint256 index) internal view returns (bytes32 value) {
        if (index >= length(deque)) revert QueueOutOfBounds();
        // By construction, length is a uint128, so the check above ensures that index can be safely downcast to uint128
        unchecked {
            return deque._data[deque._begin + uint128(index)];
        }
    }

    /**
     * @dev Resets the queue back to being empty.
     *
     * NOTE: The current items are left behind in storage. This does not affect the functioning of the queue, but misses
     * out on potential gas refunds.
     */
    function clear(Bytes32Deque storage deque) internal {
        deque._begin = 0;
        deque._end = 0;
    }

    /**
     * @dev Returns the number of items in the queue.
     */
    function length(Bytes32Deque storage deque) internal view returns (uint256) {
        unchecked {
            return uint256(deque._end - deque._begin);
        }
    }

    /**
     * @dev Returns true if the queue is empty.
     */
    function empty(Bytes32Deque storage deque) internal view returns (bool) {
        return deque._end == deque._begin;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError, bytes32) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError, bytes32) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError, bytes32) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.20;

import {MessageHashUtils} from "./MessageHashUtils.sol";
import {ShortStrings, ShortString} from "../ShortStrings.sol";
import {IERC5267} from "../../interfaces/IERC5267.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;

    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;

    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;

    ShortString private immutable _name;
    ShortString private immutable _version;
    string private _nameFallback;
    string private _versionFallback;

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));

        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {IERC-5267}.
     */
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }

    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _name which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Name() internal view returns (string memory) {
        return _name.toStringWithFallback(_nameFallback);
    }

    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _version which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Version() internal view returns (string memory) {
        return _version.toStringWithFallback(_versionFallback);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.25;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/governance/Governor.sol";

/**
 * @title This is the migration contract for the Gloom token to remove the reflection mechanism
 * @notice The migration period is 30 days. Migrating tokens is a one-way process and cannot be reversed
 * After the migration period ends, any remaining tokens will be either burned or transferred pending a proposal
 * The GloomGovernor is an OpenZeppelin governor contract controlled by new Gloom token holders
 * @custom:security-contact support@gloomtoken.com
 */
contract GloomMigrator {
    /// Old Gloom token contract
    ERC20 public constant OLD_GLOOM_TOKEN =
        ERC20(0x4Ff77748E723f0d7B161f90B4bc505187226ED0D);

    /// New Gloom token contract
    ERC20 public newGloomToken;

    /// OpenZeppelin governor contract that will have authority over unmigrated tokens
    Governor public gloomGovernor;

    /// Burn address
    address public constant BURN_ADDRESS =
        0x000000000000000000000000000000000000dEaD;

    /// Unix timestamp when the migration period ends and GloomGovernor can transfer remaining tokens
    uint256 public immutable migrationPeriodEndTimestamp;

    /// Event emitted for each token migration
    event TokensMigrated(address indexed caller, uint256 tokenAmount);

    /**
     * @notice Contract must be deployed with the entire supply of the new Gloom token
     * @param newGloomToken_ The new Gloom token contract
     * @param gloomGovernor_ The new Gloom OpenZeppelin governor contract
     */
    constructor(ERC20 newGloomToken_, Governor gloomGovernor_) {
        require(
            newGloomToken_.decimals() == OLD_GLOOM_TOKEN.decimals(),
            "Decimals do not match"
        );
        require(
            newGloomToken_.balanceOf(address(this)) ==
                OLD_GLOOM_TOKEN.totalSupply(),
            "Token supply does not match"
        );

        newGloomToken = newGloomToken_;
        gloomGovernor = gloomGovernor_;

        // Migration period is 30 days
        migrationPeriodEndTimestamp = block.timestamp + 30 days;
    }

    /**
     * @notice Burn old Gloom tokens to receive new Gloom tokens, requires approval
     * @param tokenAmount The amount of old tokens to migrate
     */
    function migrateTokens(uint256 tokenAmount) external {
        require(
            block.timestamp < migrationPeriodEndTimestamp,
            "Migration period has ended"
        );
        bool success = OLD_GLOOM_TOKEN.transferFrom(
            msg.sender,
            BURN_ADDRESS,
            tokenAmount
        );
        require(success, "Transfer failed");

        newGloomToken.transfer(msg.sender, tokenAmount);

        emit TokensMigrated(msg.sender, tokenAmount);
    }

    /**
     * @notice After the migration period ends, the GloomGovernor has access to the transfer function
     * GloomGovernor is operated by new Gloom token holders using ERC20 voting
     * @param recipient The address to transfer remaining tokens to MUST be either GloomGovernor or BURN_ADDRESS
     */
    function transferUnmigratedTokens(address recipient) external {
        require(
            block.timestamp >= migrationPeriodEndTimestamp,
            "Migration period is still active"
        );
        require(
            msg.sender == address(gloomGovernor),
            "Only GloomGovernor contract can call this function"
        );
        require(
            recipient == address(gloomGovernor) || recipient == BURN_ADDRESS,
            "Recipient must be GloomGovernor or burn address"
        );

        uint256 unmigratedTokenAmount = newGloomToken.balanceOf(address(this));

        newGloomToken.transfer(recipient, unmigratedTokenAmount);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (governance/Governor.sol)

pragma solidity ^0.8.20;

import {IERC721Receiver} from "../token/ERC721/IERC721Receiver.sol";
import {IERC1155Receiver} from "../token/ERC1155/IERC1155Receiver.sol";
import {EIP712} from "../utils/cryptography/EIP712.sol";
import {SignatureChecker} from "../utils/cryptography/SignatureChecker.sol";
import {IERC165, ERC165} from "../utils/introspection/ERC165.sol";
import {SafeCast} from "../utils/math/SafeCast.sol";
import {DoubleEndedQueue} from "../utils/structs/DoubleEndedQueue.sol";
import {Address} from "../utils/Address.sol";
import {Context} from "../utils/Context.sol";
import {Nonces} from "../utils/Nonces.sol";
import {IGovernor, IERC6372} from "./IGovernor.sol";

/**
 * @dev Core of the governance system, designed to be extended through various modules.
 *
 * This contract is abstract and requires several functions to be implemented in various modules:
 *
 * - A counting module must implement {quorum}, {_quorumReached}, {_voteSucceeded} and {_countVote}
 * - A voting module must implement {_getVotes}
 * - Additionally, {votingPeriod} must also be implemented
 */
abstract contract Governor is Context, ERC165, EIP712, Nonces, IGovernor, IERC721Receiver, IERC1155Receiver {
    using DoubleEndedQueue for DoubleEndedQueue.Bytes32Deque;

    bytes32 public constant BALLOT_TYPEHASH =
        keccak256("Ballot(uint256 proposalId,uint8 support,address voter,uint256 nonce)");
    bytes32 public constant EXTENDED_BALLOT_TYPEHASH =
        keccak256(
            "ExtendedBallot(uint256 proposalId,uint8 support,address voter,uint256 nonce,string reason,bytes params)"
        );

    struct ProposalCore {
        address proposer;
        uint48 voteStart;
        uint32 voteDuration;
        bool executed;
        bool canceled;
        uint48 etaSeconds;
    }

    bytes32 private constant ALL_PROPOSAL_STATES_BITMAP = bytes32((2 ** (uint8(type(ProposalState).max) + 1)) - 1);
    string private _name;

    mapping(uint256 proposalId => ProposalCore) private _proposals;

    // This queue keeps track of the governor operating on itself. Calls to functions protected by the {onlyGovernance}
    // modifier needs to be whitelisted in this queue. Whitelisting is set in {execute}, consumed by the
    // {onlyGovernance} modifier and eventually reset after {_executeOperations} completes. This ensures that the
    // execution of {onlyGovernance} protected calls can only be achieved through successful proposals.
    DoubleEndedQueue.Bytes32Deque private _governanceCall;

    /**
     * @dev Restricts a function so it can only be executed through governance proposals. For example, governance
     * parameter setters in {GovernorSettings} are protected using this modifier.
     *
     * The governance executing address may be different from the Governor's own address, for example it could be a
     * timelock. This can be customized by modules by overriding {_executor}. The executor is only able to invoke these
     * functions during the execution of the governor's {execute} function, and not under any other circumstances. Thus,
     * for example, additional timelock proposers are not able to change governance parameters without going through the
     * governance protocol (since v4.6).
     */
    modifier onlyGovernance() {
        _checkGovernance();
        _;
    }

    /**
     * @dev Sets the value for {name} and {version}
     */
    constructor(string memory name_) EIP712(name_, version()) {
        _name = name_;
    }

    /**
     * @dev Function to receive ETH that will be handled by the governor (disabled if executor is a third party contract)
     */
    receive() external payable virtual {
        if (_executor() != address(this)) {
            revert GovernorDisabledDeposit();
        }
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {
        return
            interfaceId == type(IGovernor).interfaceId ||
            interfaceId == type(IERC1155Receiver).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IGovernor-name}.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IGovernor-version}.
     */
    function version() public view virtual returns (string memory) {
        return "1";
    }

    /**
     * @dev See {IGovernor-hashProposal}.
     *
     * The proposal id is produced by hashing the ABI encoded `targets` array, the `values` array, the `calldatas` array
     * and the descriptionHash (bytes32 which itself is the keccak256 hash of the description string). This proposal id
     * can be produced from the proposal data which is part of the {ProposalCreated} event. It can even be computed in
     * advance, before the proposal is submitted.
     *
     * Note that the chainId and the governor address are not part of the proposal id computation. Consequently, the
     * same proposal (with same operation and same description) will have the same id if submitted on multiple governors
     * across multiple networks. This also means that in order to execute the same operation twice (on the same
     * governor) the proposer will have to change the description in order to avoid proposal id conflicts.
     */
    function hashProposal(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) public pure virtual returns (uint256) {
        return uint256(keccak256(abi.encode(targets, values, calldatas, descriptionHash)));
    }

    /**
     * @dev See {IGovernor-state}.
     */
    function state(uint256 proposalId) public view virtual returns (ProposalState) {
        // We read the struct fields into the stack at once so Solidity emits a single SLOAD
        ProposalCore storage proposal = _proposals[proposalId];
        bool proposalExecuted = proposal.executed;
        bool proposalCanceled = proposal.canceled;

        if (proposalExecuted) {
            return ProposalState.Executed;
        }

        if (proposalCanceled) {
            return ProposalState.Canceled;
        }

        uint256 snapshot = proposalSnapshot(proposalId);

        if (snapshot == 0) {
            revert GovernorNonexistentProposal(proposalId);
        }

        uint256 currentTimepoint = clock();

        if (snapshot >= currentTimepoint) {
            return ProposalState.Pending;
        }

        uint256 deadline = proposalDeadline(proposalId);

        if (deadline >= currentTimepoint) {
            return ProposalState.Active;
        } else if (!_quorumReached(proposalId) || !_voteSucceeded(proposalId)) {
            return ProposalState.Defeated;
        } else if (proposalEta(proposalId) == 0) {
            return ProposalState.Succeeded;
        } else {
            return ProposalState.Queued;
        }
    }

    /**
     * @dev See {IGovernor-proposalThreshold}.
     */
    function proposalThreshold() public view virtual returns (uint256) {
        return 0;
    }

    /**
     * @dev See {IGovernor-proposalSnapshot}.
     */
    function proposalSnapshot(uint256 proposalId) public view virtual returns (uint256) {
        return _proposals[proposalId].voteStart;
    }

    /**
     * @dev See {IGovernor-proposalDeadline}.
     */
    function proposalDeadline(uint256 proposalId) public view virtual returns (uint256) {
        return _proposals[proposalId].voteStart + _proposals[proposalId].voteDuration;
    }

    /**
     * @dev See {IGovernor-proposalProposer}.
     */
    function proposalProposer(uint256 proposalId) public view virtual returns (address) {
        return _proposals[proposalId].proposer;
    }

    /**
     * @dev See {IGovernor-proposalEta}.
     */
    function proposalEta(uint256 proposalId) public view virtual returns (uint256) {
        return _proposals[proposalId].etaSeconds;
    }

    /**
     * @dev See {IGovernor-proposalNeedsQueuing}.
     */
    function proposalNeedsQueuing(uint256) public view virtual returns (bool) {
        return false;
    }

    /**
     * @dev Reverts if the `msg.sender` is not the executor. In case the executor is not this contract
     * itself, the function reverts if `msg.data` is not whitelisted as a result of an {execute}
     * operation. See {onlyGovernance}.
     */
    function _checkGovernance() internal virtual {
        if (_executor() != _msgSender()) {
            revert GovernorOnlyExecutor(_msgSender());
        }
        if (_executor() != address(this)) {
            bytes32 msgDataHash = keccak256(_msgData());
            // loop until popping the expected operation - throw if deque is empty (operation not authorized)
            while (_governanceCall.popFront() != msgDataHash) {}
        }
    }

    /**
     * @dev Amount of votes already cast passes the threshold limit.
     */
    function _quorumReached(uint256 proposalId) internal view virtual returns (bool);

    /**
     * @dev Is the proposal successful or not.
     */
    function _voteSucceeded(uint256 proposalId) internal view virtual returns (bool);

    /**
     * @dev Get the voting weight of `account` at a specific `timepoint`, for a vote as described by `params`.
     */
    function _getVotes(address account, uint256 timepoint, bytes memory params) internal view virtual returns (uint256);

    /**
     * @dev Register a vote for `proposalId` by `account` with a given `support`, voting `weight` and voting `params`.
     *
     * Note: Support is generic and can represent various things depending on the voting system used.
     */
    function _countVote(
        uint256 proposalId,
        address account,
        uint8 support,
        uint256 weight,
        bytes memory params
    ) internal virtual;

    /**
     * @dev Default additional encoded parameters used by castVote methods that don't include them
     *
     * Note: Should be overridden by specific implementations to use an appropriate value, the
     * meaning of the additional params, in the context of that implementation
     */
    function _defaultParams() internal view virtual returns (bytes memory) {
        return "";
    }

    /**
     * @dev See {IGovernor-propose}. This function has opt-in frontrunning protection, described in {_isValidDescriptionForProposer}.
     */
    function propose(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        string memory description
    ) public virtual returns (uint256) {
        address proposer = _msgSender();

        // check description restriction
        if (!_isValidDescriptionForProposer(proposer, description)) {
            revert GovernorRestrictedProposer(proposer);
        }

        // check proposal threshold
        uint256 proposerVotes = getVotes(proposer, clock() - 1);
        uint256 votesThreshold = proposalThreshold();
        if (proposerVotes < votesThreshold) {
            revert GovernorInsufficientProposerVotes(proposer, proposerVotes, votesThreshold);
        }

        return _propose(targets, values, calldatas, description, proposer);
    }

    /**
     * @dev Internal propose mechanism. Can be overridden to add more logic on proposal creation.
     *
     * Emits a {IGovernor-ProposalCreated} event.
     */
    function _propose(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        string memory description,
        address proposer
    ) internal virtual returns (uint256 proposalId) {
        proposalId = hashProposal(targets, values, calldatas, keccak256(bytes(description)));

        if (targets.length != values.length || targets.length != calldatas.length || targets.length == 0) {
            revert GovernorInvalidProposalLength(targets.length, calldatas.length, values.length);
        }
        if (_proposals[proposalId].voteStart != 0) {
            revert GovernorUnexpectedProposalState(proposalId, state(proposalId), bytes32(0));
        }

        uint256 snapshot = clock() + votingDelay();
        uint256 duration = votingPeriod();

        ProposalCore storage proposal = _proposals[proposalId];
        proposal.proposer = proposer;
        proposal.voteStart = SafeCast.toUint48(snapshot);
        proposal.voteDuration = SafeCast.toUint32(duration);

        emit ProposalCreated(
            proposalId,
            proposer,
            targets,
            values,
            new string[](targets.length),
            calldatas,
            snapshot,
            snapshot + duration,
            description
        );

        // Using a named return variable to avoid stack too deep errors
    }

    /**
     * @dev See {IGovernor-queue}.
     */
    function queue(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) public virtual returns (uint256) {
        uint256 proposalId = hashProposal(targets, values, calldatas, descriptionHash);

        _validateStateBitmap(proposalId, _encodeStateBitmap(ProposalState.Succeeded));

        uint48 etaSeconds = _queueOperations(proposalId, targets, values, calldatas, descriptionHash);

        if (etaSeconds != 0) {
            _proposals[proposalId].etaSeconds = etaSeconds;
            emit ProposalQueued(proposalId, etaSeconds);
        } else {
            revert GovernorQueueNotImplemented();
        }

        return proposalId;
    }

    /**
     * @dev Internal queuing mechanism. Can be overridden (without a super call) to modify the way queuing is
     * performed (for example adding a vault/timelock).
     *
     * This is empty by default, and must be overridden to implement queuing.
     *
     * This function returns a timestamp that describes the expected ETA for execution. If the returned value is 0
     * (which is the default value), the core will consider queueing did not succeed, and the public {queue} function
     * will revert.
     *
     * NOTE: Calling this function directly will NOT check the current state of the proposal, or emit the
     * `ProposalQueued` event. Queuing a proposal should be done using {queue}.
     */
    function _queueOperations(
        uint256 /*proposalId*/,
        address[] memory /*targets*/,
        uint256[] memory /*values*/,
        bytes[] memory /*calldatas*/,
        bytes32 /*descriptionHash*/
    ) internal virtual returns (uint48) {
        return 0;
    }

    /**
     * @dev See {IGovernor-execute}.
     */
    function execute(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) public payable virtual returns (uint256) {
        uint256 proposalId = hashProposal(targets, values, calldatas, descriptionHash);

        _validateStateBitmap(
            proposalId,
            _encodeStateBitmap(ProposalState.Succeeded) | _encodeStateBitmap(ProposalState.Queued)
        );

        // mark as executed before calls to avoid reentrancy
        _proposals[proposalId].executed = true;

        // before execute: register governance call in queue.
        if (_executor() != address(this)) {
            for (uint256 i = 0; i < targets.length; ++i) {
                if (targets[i] == address(this)) {
                    _governanceCall.pushBack(keccak256(calldatas[i]));
                }
            }
        }

        _executeOperations(proposalId, targets, values, calldatas, descriptionHash);

        // after execute: cleanup governance call queue.
        if (_executor() != address(this) && !_governanceCall.empty()) {
            _governanceCall.clear();
        }

        emit ProposalExecuted(proposalId);

        return proposalId;
    }

    /**
     * @dev Internal execution mechanism. Can be overridden (without a super call) to modify the way execution is
     * performed (for example adding a vault/timelock).
     *
     * NOTE: Calling this function directly will NOT check the current state of the proposal, set the executed flag to
     * true or emit the `ProposalExecuted` event. Executing a proposal should be done using {execute} or {_execute}.
     */
    function _executeOperations(
        uint256 /* proposalId */,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 /*descriptionHash*/
    ) internal virtual {
        for (uint256 i = 0; i < targets.length; ++i) {
            (bool success, bytes memory returndata) = targets[i].call{value: values[i]}(calldatas[i]);
            Address.verifyCallResult(success, returndata);
        }
    }

    /**
     * @dev See {IGovernor-cancel}.
     */
    function cancel(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) public virtual returns (uint256) {
        // The proposalId will be recomputed in the `_cancel` call further down. However we need the value before we
        // do the internal call, because we need to check the proposal state BEFORE the internal `_cancel` call
        // changes it. The `hashProposal` duplication has a cost that is limited, and that we accept.
        uint256 proposalId = hashProposal(targets, values, calldatas, descriptionHash);

        // public cancel restrictions (on top of existing _cancel restrictions).
        _validateStateBitmap(proposalId, _encodeStateBitmap(ProposalState.Pending));
        if (_msgSender() != proposalProposer(proposalId)) {
            revert GovernorOnlyProposer(_msgSender());
        }

        return _cancel(targets, values, calldatas, descriptionHash);
    }

    /**
     * @dev Internal cancel mechanism with minimal restrictions. A proposal can be cancelled in any state other than
     * Canceled, Expired, or Executed. Once cancelled a proposal can't be re-submitted.
     *
     * Emits a {IGovernor-ProposalCanceled} event.
     */
    function _cancel(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal virtual returns (uint256) {
        uint256 proposalId = hashProposal(targets, values, calldatas, descriptionHash);

        _validateStateBitmap(
            proposalId,
            ALL_PROPOSAL_STATES_BITMAP ^
                _encodeStateBitmap(ProposalState.Canceled) ^
                _encodeStateBitmap(ProposalState.Expired) ^
                _encodeStateBitmap(ProposalState.Executed)
        );

        _proposals[proposalId].canceled = true;
        emit ProposalCanceled(proposalId);

        return proposalId;
    }

    /**
     * @dev See {IGovernor-getVotes}.
     */
    function getVotes(address account, uint256 timepoint) public view virtual returns (uint256) {
        return _getVotes(account, timepoint, _defaultParams());
    }

    /**
     * @dev See {IGovernor-getVotesWithParams}.
     */
    function getVotesWithParams(
        address account,
        uint256 timepoint,
        bytes memory params
    ) public view virtual returns (uint256) {
        return _getVotes(account, timepoint, params);
    }

    /**
     * @dev See {IGovernor-castVote}.
     */
    function castVote(uint256 proposalId, uint8 support) public virtual returns (uint256) {
        address voter = _msgSender();
        return _castVote(proposalId, voter, support, "");
    }

    /**
     * @dev See {IGovernor-castVoteWithReason}.
     */
    function castVoteWithReason(
        uint256 proposalId,
        uint8 support,
        string calldata reason
    ) public virtual returns (uint256) {
        address voter = _msgSender();
        return _castVote(proposalId, voter, support, reason);
    }

    /**
     * @dev See {IGovernor-castVoteWithReasonAndParams}.
     */
    function castVoteWithReasonAndParams(
        uint256 proposalId,
        uint8 support,
        string calldata reason,
        bytes memory params
    ) public virtual returns (uint256) {
        address voter = _msgSender();
        return _castVote(proposalId, voter, support, reason, params);
    }

    /**
     * @dev See {IGovernor-castVoteBySig}.
     */
    function castVoteBySig(
        uint256 proposalId,
        uint8 support,
        address voter,
        bytes memory signature
    ) public virtual returns (uint256) {
        bool valid = SignatureChecker.isValidSignatureNow(
            voter,
            _hashTypedDataV4(keccak256(abi.encode(BALLOT_TYPEHASH, proposalId, support, voter, _useNonce(voter)))),
            signature
        );

        if (!valid) {
            revert GovernorInvalidSignature(voter);
        }

        return _castVote(proposalId, voter, support, "");
    }

    /**
     * @dev See {IGovernor-castVoteWithReasonAndParamsBySig}.
     */
    function castVoteWithReasonAndParamsBySig(
        uint256 proposalId,
        uint8 support,
        address voter,
        string calldata reason,
        bytes memory params,
        bytes memory signature
    ) public virtual returns (uint256) {
        bool valid = SignatureChecker.isValidSignatureNow(
            voter,
            _hashTypedDataV4(
                keccak256(
                    abi.encode(
                        EXTENDED_BALLOT_TYPEHASH,
                        proposalId,
                        support,
                        voter,
                        _useNonce(voter),
                        keccak256(bytes(reason)),
                        keccak256(params)
                    )
                )
            ),
            signature
        );

        if (!valid) {
            revert GovernorInvalidSignature(voter);
        }

        return _castVote(proposalId, voter, support, reason, params);
    }

    /**
     * @dev Internal vote casting mechanism: Check that the vote is pending, that it has not been cast yet, retrieve
     * voting weight using {IGovernor-getVotes} and call the {_countVote} internal function. Uses the _defaultParams().
     *
     * Emits a {IGovernor-VoteCast} event.
     */
    function _castVote(
        uint256 proposalId,
        address account,
        uint8 support,
        string memory reason
    ) internal virtual returns (uint256) {
        return _castVote(proposalId, account, support, reason, _defaultParams());
    }

    /**
     * @dev Internal vote casting mechanism: Check that the vote is pending, that it has not been cast yet, retrieve
     * voting weight using {IGovernor-getVotes} and call the {_countVote} internal function.
     *
     * Emits a {IGovernor-VoteCast} event.
     */
    function _castVote(
        uint256 proposalId,
        address account,
        uint8 support,
        string memory reason,
        bytes memory params
    ) internal virtual returns (uint256) {
        _validateStateBitmap(proposalId, _encodeStateBitmap(ProposalState.Active));

        uint256 weight = _getVotes(account, proposalSnapshot(proposalId), params);
        _countVote(proposalId, account, support, weight, params);

        if (params.length == 0) {
            emit VoteCast(account, proposalId, support, weight, reason);
        } else {
            emit VoteCastWithParams(account, proposalId, support, weight, reason, params);
        }

        return weight;
    }

    /**
     * @dev Relays a transaction or function call to an arbitrary target. In cases where the governance executor
     * is some contract other than the governor itself, like when using a timelock, this function can be invoked
     * in a governance proposal to recover tokens or Ether that was sent to the governor contract by mistake.
     * Note that if the executor is simply the governor itself, use of `relay` is redundant.
     */
    function relay(address target, uint256 value, bytes calldata data) external payable virtual onlyGovernance {
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        Address.verifyCallResult(success, returndata);
    }

    /**
     * @dev Address through which the governor executes action. Will be overloaded by module that execute actions
     * through another contract such as a timelock.
     */
    function _executor() internal view virtual returns (address) {
        return address(this);
    }

    /**
     * @dev See {IERC721Receiver-onERC721Received}.
     * Receiving tokens is disabled if the governance executor is other than the governor itself (eg. when using with a timelock).
     */
    function onERC721Received(address, address, uint256, bytes memory) public virtual returns (bytes4) {
        if (_executor() != address(this)) {
            revert GovernorDisabledDeposit();
        }
        return this.onERC721Received.selector;
    }

    /**
     * @dev See {IERC1155Receiver-onERC1155Received}.
     * Receiving tokens is disabled if the governance executor is other than the governor itself (eg. when using with a timelock).
     */
    function onERC1155Received(address, address, uint256, uint256, bytes memory) public virtual returns (bytes4) {
        if (_executor() != address(this)) {
            revert GovernorDisabledDeposit();
        }
        return this.onERC1155Received.selector;
    }

    /**
     * @dev See {IERC1155Receiver-onERC1155BatchReceived}.
     * Receiving tokens is disabled if the governance executor is other than the governor itself (eg. when using with a timelock).
     */
    function onERC1155BatchReceived(
        address,
        address,
        uint256[] memory,
        uint256[] memory,
        bytes memory
    ) public virtual returns (bytes4) {
        if (_executor() != address(this)) {
            revert GovernorDisabledDeposit();
        }
        return this.onERC1155BatchReceived.selector;
    }

    /**
     * @dev Encodes a `ProposalState` into a `bytes32` representation where each bit enabled corresponds to
     * the underlying position in the `ProposalState` enum. For example:
     *
     * 0x000...10000
     *   ^^^^^^------ ...
     *         ^----- Succeeded
     *          ^---- Defeated
     *           ^--- Canceled
     *            ^-- Active
     *             ^- Pending
     */
    function _encodeStateBitmap(ProposalState proposalState) internal pure returns (bytes32) {
        return bytes32(1 << uint8(proposalState));
    }

    /**
     * @dev Check that the current state of a proposal matches the requirements described by the `allowedStates` bitmap.
     * This bitmap should be built using `_encodeStateBitmap`.
     *
     * If requirements are not met, reverts with a {GovernorUnexpectedProposalState} error.
     */
    function _validateStateBitmap(uint256 proposalId, bytes32 allowedStates) private view returns (ProposalState) {
        ProposalState currentState = state(proposalId);
        if (_encodeStateBitmap(currentState) & allowedStates == bytes32(0)) {
            revert GovernorUnexpectedProposalState(proposalId, currentState, allowedStates);
        }
        return currentState;
    }

    /*
     * @dev Check if the proposer is authorized to submit a proposal with the given description.
     *
     * If the proposal description ends with `#proposer=0x???`, where `0x???` is an address written as a hex string
     * (case insensitive), then the submission of this proposal will only be authorized to said address.
     *
     * This is used for frontrunning protection. By adding this pattern at the end of their proposal, one can ensure
     * that no other address can submit the same proposal. An attacker would have to either remove or change that part,
     * which would result in a different proposal id.
     *
     * If the description does not match this pattern, it is unrestricted and anyone can submit it. This includes:
     * - If the `0x???` part is not a valid hex string.
     * - If the `0x???` part is a valid hex string, but does not contain exactly 40 hex digits.
     * - If it ends with the expected suffix followed by newlines or other whitespace.
     * - If it ends with some other similar suffix, e.g. `#other=abc`.
     * - If it does not end with any such suffix.
     */
    function _isValidDescriptionForProposer(
        address proposer,
        string memory description
    ) internal view virtual returns (bool) {
        uint256 len = bytes(description).length;

        // Length is too short to contain a valid proposer suffix
        if (len < 52) {
            return true;
        }

        // Extract what would be the `#proposer=0x` marker beginning the suffix
        bytes12 marker;
        assembly {
            // - Start of the string contents in memory = description + 32
            // - First character of the marker = len - 52
            //   - Length of "#proposer=0x0000000000000000000000000000000000000000" = 52
            // - We read the memory word starting at the first character of the marker:
            //   - (description + 32) + (len - 52) = description + (len - 20)
            // - Note: Solidity will ignore anything past the first 12 bytes
            marker := mload(add(description, sub(len, 20)))
        }

        // If the marker is not found, there is no proposer suffix to check
        if (marker != bytes12("#proposer=0x")) {
            return true;
        }

        // Parse the 40 characters following the marker as uint160
        uint160 recovered = 0;
        for (uint256 i = len - 40; i < len; ++i) {
            (bool isHex, uint8 value) = _tryHexToUint(bytes(description)[i]);
            // If any of the characters is not a hex digit, ignore the suffix entirely
            if (!isHex) {
                return true;
            }
            recovered = (recovered << 4) | value;
        }

        return recovered == uint160(proposer);
    }

    /**
     * @dev Try to parse a character from a string as a hex value. Returns `(true, value)` if the char is in
     * `[0-9a-fA-F]` and `(false, 0)` otherwise. Value is guaranteed to be in the range `0 <= value < 16`
     */
    function _tryHexToUint(bytes1 char) private pure returns (bool, uint8) {
        uint8 c = uint8(char);
        unchecked {
            // Case 0-9
            if (47 < c && c < 58) {
                return (true, c - 48);
            }
            // Case A-F
            else if (64 < c && c < 71) {
                return (true, c - 55);
            }
            // Case a-f
            else if (96 < c && c < 103) {
                return (true, c - 87);
            }
            // Else: not a hex char
            else {
                return (false, 0);
            }
        }
    }

    /**
     * @inheritdoc IERC6372
     */
    function clock() public view virtual returns (uint48);

    /**
     * @inheritdoc IERC6372
     */
    // solhint-disable-next-line func-name-mixedcase
    function CLOCK_MODE() public view virtual returns (string memory);

    /**
     * @inheritdoc IGovernor
     */
    function votingDelay() public view virtual returns (uint256);

    /**
     * @inheritdoc IGovernor
     */
    function votingPeriod() public view virtual returns (uint256);

    /**
     * @inheritdoc IGovernor
     */
    function quorum(uint256 timepoint) public view virtual returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../../utils/introspection/IERC165.sol";

/**
 * @dev Interface that must be implemented by smart contracts in order to receive
 * ERC-1155 token transfers.
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC1271.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash      Hash of the data to be signed
     * @param signature Signature byte array associated with _data
     */
    function isValidSignature(bytes32 hash, bytes memory signature) external view returns (bytes4 magicValue);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.20;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC6372.sol)

pragma solidity ^0.8.20;

interface IERC6372 {
    /**
     * @dev Clock used for flagging checkpoints. Can be overridden to implement timestamp based checkpoints (and voting).
     */
    function clock() external view returns (uint48);

    /**
     * @dev Description of the clock
     */
    // solhint-disable-next-line func-name-mixedcase
    function CLOCK_MODE() external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.20;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be
     * reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (governance/IGovernor.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../interfaces/IERC165.sol";
import {IERC6372} from "../interfaces/IERC6372.sol";

/**
 * @dev Interface of the {Governor} core.
 */
interface IGovernor is IERC165, IERC6372 {
    enum ProposalState {
        Pending,
        Active,
        Canceled,
        Defeated,
        Succeeded,
        Queued,
        Expired,
        Executed
    }

    /**
     * @dev Empty proposal or a mismatch between the parameters length for a proposal call.
     */
    error GovernorInvalidProposalLength(uint256 targets, uint256 calldatas, uint256 values);

    /**
     * @dev The vote was already cast.
     */
    error GovernorAlreadyCastVote(address voter);

    /**
     * @dev Token deposits are disabled in this contract.
     */
    error GovernorDisabledDeposit();

    /**
     * @dev The `account` is not a proposer.
     */
    error GovernorOnlyProposer(address account);

    /**
     * @dev The `account` is not the governance executor.
     */
    error GovernorOnlyExecutor(address account);

    /**
     * @dev The `proposalId` doesn't exist.
     */
    error GovernorNonexistentProposal(uint256 proposalId);

    /**
     * @dev The current state of a proposal is not the required for performing an operation.
     * The `expectedStates` is a bitmap with the bits enabled for each ProposalState enum position
     * counting from right to left.
     *
     * NOTE: If `expectedState` is `bytes32(0)`, the proposal is expected to not be in any state (i.e. not exist).
     * This is the case when a proposal that is expected to be unset is already initiated (the proposal is duplicated).
     *
     * See {Governor-_encodeStateBitmap}.
     */
    error GovernorUnexpectedProposalState(uint256 proposalId, ProposalState current, bytes32 expectedStates);

    /**
     * @dev The voting period set is not a valid period.
     */
    error GovernorInvalidVotingPeriod(uint256 votingPeriod);

    /**
     * @dev The `proposer` does not have the required votes to create a proposal.
     */
    error GovernorInsufficientProposerVotes(address proposer, uint256 votes, uint256 threshold);

    /**
     * @dev The `proposer` is not allowed to create a proposal.
     */
    error GovernorRestrictedProposer(address proposer);

    /**
     * @dev The vote type used is not valid for the corresponding counting module.
     */
    error GovernorInvalidVoteType();

    /**
     * @dev Queue operation is not implemented for this governor. Execute should be called directly.
     */
    error GovernorQueueNotImplemented();

    /**
     * @dev The proposal hasn't been queued yet.
     */
    error GovernorNotQueuedProposal(uint256 proposalId);

    /**
     * @dev The proposal has already been queued.
     */
    error GovernorAlreadyQueuedProposal(uint256 proposalId);

    /**
     * @dev The provided signature is not valid for the expected `voter`.
     * If the `voter` is a contract, the signature is not valid using {IERC1271-isValidSignature}.
     */
    error GovernorInvalidSignature(address voter);

    /**
     * @dev Emitted when a proposal is created.
     */
    event ProposalCreated(
        uint256 proposalId,
        address proposer,
        address[] targets,
        uint256[] values,
        string[] signatures,
        bytes[] calldatas,
        uint256 voteStart,
        uint256 voteEnd,
        string description
    );

    /**
     * @dev Emitted when a proposal is queued.
     */
    event ProposalQueued(uint256 proposalId, uint256 etaSeconds);

    /**
     * @dev Emitted when a proposal is executed.
     */
    event ProposalExecuted(uint256 proposalId);

    /**
     * @dev Emitted when a proposal is canceled.
     */
    event ProposalCanceled(uint256 proposalId);

    /**
     * @dev Emitted when a vote is cast without params.
     *
     * Note: `support` values should be seen as buckets. Their interpretation depends on the voting module used.
     */
    event VoteCast(address indexed voter, uint256 proposalId, uint8 support, uint256 weight, string reason);

    /**
     * @dev Emitted when a vote is cast with params.
     *
     * Note: `support` values should be seen as buckets. Their interpretation depends on the voting module used.
     * `params` are additional encoded parameters. Their interpepretation also depends on the voting module used.
     */
    event VoteCastWithParams(
        address indexed voter,
        uint256 proposalId,
        uint8 support,
        uint256 weight,
        string reason,
        bytes params
    );

    /**
     * @notice module:core
     * @dev Name of the governor instance (used in building the ERC712 domain separator).
     */
    function name() external view returns (string memory);

    /**
     * @notice module:core
     * @dev Version of the governor instance (used in building the ERC712 domain separator). Default: "1"
     */
    function version() external view returns (string memory);

    /**
     * @notice module:voting
     * @dev A description of the possible `support` values for {castVote} and the way these votes are counted, meant to
     * be consumed by UIs to show correct vote options and interpret the results. The string is a URL-encoded sequence of
     * key-value pairs that each describe one aspect, for example `support=bravo&quorum=for,abstain`.
     *
     * There are 2 standard keys: `support` and `quorum`.
     *
     * - `support=bravo` refers to the vote options 0 = Against, 1 = For, 2 = Abstain, as in `GovernorBravo`.
     * - `quorum=bravo` means that only For votes are counted towards quorum.
     * - `quorum=for,abstain` means that both For and Abstain votes are counted towards quorum.
     *
     * If a counting module makes use of encoded `params`, it should  include this under a `params` key with a unique
     * name that describes the behavior. For example:
     *
     * - `params=fractional` might refer to a scheme where votes are divided fractionally between for/against/abstain.
     * - `params=erc721` might refer to a scheme where specific NFTs are delegated to vote.
     *
     * NOTE: The string can be decoded by the standard
     * https://developer.mozilla.org/en-US/docs/Web/API/URLSearchParams[`URLSearchParams`]
     * JavaScript class.
     */
    // solhint-disable-next-line func-name-mixedcase
    function COUNTING_MODE() external view returns (string memory);

    /**
     * @notice module:core
     * @dev Hashing function used to (re)build the proposal id from the proposal details..
     */
    function hashProposal(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) external pure returns (uint256);

    /**
     * @notice module:core
     * @dev Current state of a proposal, following Compound's convention
     */
    function state(uint256 proposalId) external view returns (ProposalState);

    /**
     * @notice module:core
     * @dev The number of votes required in order for a voter to become a proposer.
     */
    function proposalThreshold() external view returns (uint256);

    /**
     * @notice module:core
     * @dev Timepoint used to retrieve user's votes and quorum. If using block number (as per Compound's Comp), the
     * snapshot is performed at the end of this block. Hence, voting for this proposal starts at the beginning of the
     * following block.
     */
    function proposalSnapshot(uint256 proposalId) external view returns (uint256);

    /**
     * @notice module:core
     * @dev Timepoint at which votes close. If using block number, votes close at the end of this block, so it is
     * possible to cast a vote during this block.
     */
    function proposalDeadline(uint256 proposalId) external view returns (uint256);

    /**
     * @notice module:core
     * @dev The account that created a proposal.
     */
    function proposalProposer(uint256 proposalId) external view returns (address);

    /**
     * @notice module:core
     * @dev The time when a queued proposal becomes executable ("ETA"). Unlike {proposalSnapshot} and
     * {proposalDeadline}, this doesn't use the governor clock, and instead relies on the executor's clock which may be
     * different. In most cases this will be a timestamp.
     */
    function proposalEta(uint256 proposalId) external view returns (uint256);

    /**
     * @notice module:core
     * @dev Whether a proposal needs to be queued before execution.
     */
    function proposalNeedsQueuing(uint256 proposalId) external view returns (bool);

    /**
     * @notice module:user-config
     * @dev Delay, between the proposal is created and the vote starts. The unit this duration is expressed in depends
     * on the clock (see EIP-6372) this contract uses.
     *
     * This can be increased to leave time for users to buy voting power, or delegate it, before the voting of a
     * proposal starts.
     *
     * NOTE: While this interface returns a uint256, timepoints are stored as uint48 following the ERC-6372 clock type.
     * Consequently this value must fit in a uint48 (when added to the current clock). See {IERC6372-clock}.
     */
    function votingDelay() external view returns (uint256);

    /**
     * @notice module:user-config
     * @dev Delay between the vote start and vote end. The unit this duration is expressed in depends on the clock
     * (see EIP-6372) this contract uses.
     *
     * NOTE: The {votingDelay} can delay the start of the vote. This must be considered when setting the voting
     * duration compared to the voting delay.
     *
     * NOTE: This value is stored when the proposal is submitted so that possible changes to the value do not affect
     * proposals that have already been submitted. The type used to save it is a uint32. Consequently, while this
     * interface returns a uint256, the value it returns should fit in a uint32.
     */
    function votingPeriod() external view returns (uint256);

    /**
     * @notice module:user-config
     * @dev Minimum number of cast voted required for a proposal to be successful.
     *
     * NOTE: The `timepoint` parameter corresponds to the snapshot used for counting vote. This allows to scale the
     * quorum depending on values such as the totalSupply of a token at this timepoint (see {ERC20Votes}).
     */
    function quorum(uint256 timepoint) external view returns (uint256);

    /**
     * @notice module:reputation
     * @dev Voting power of an `account` at a specific `timepoint`.
     *
     * Note: this can be implemented in a number of ways, for example by reading the delegated balance from one (or
     * multiple), {ERC20Votes} tokens.
     */
    function getVotes(address account, uint256 timepoint) external view returns (uint256);

    /**
     * @notice module:reputation
     * @dev Voting power of an `account` at a specific `timepoint` given additional encoded parameters.
     */
    function getVotesWithParams(
        address account,
        uint256 timepoint,
        bytes memory params
    ) external view returns (uint256);

    /**
     * @notice module:voting
     * @dev Returns whether `account` has cast a vote on `proposalId`.
     */
    function hasVoted(uint256 proposalId, address account) external view returns (bool);

    /**
     * @dev Create a new proposal. Vote start after a delay specified by {IGovernor-votingDelay} and lasts for a
     * duration specified by {IGovernor-votingPeriod}.
     *
     * Emits a {ProposalCreated} event.
     */
    function propose(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        string memory description
    ) external returns (uint256 proposalId);

    /**
     * @dev Queue a proposal. Some governors require this step to be performed before execution can happen. If queuing
     * is not necessary, this function may revert.
     * Queuing a proposal requires the quorum to be reached, the vote to be successful, and the deadline to be reached.
     *
     * Emits a {ProposalQueued} event.
     */
    function queue(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) external returns (uint256 proposalId);

    /**
     * @dev Execute a successful proposal. This requires the quorum to be reached, the vote to be successful, and the
     * deadline to be reached. Depending on the governor it might also be required that the proposal was queued and
     * that some delay passed.
     *
     * Emits a {ProposalExecuted} event.
     *
     * NOTE: Some modules can modify the requirements for execution, for example by adding an additional timelock.
     */
    function execute(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) external payable returns (uint256 proposalId);

    /**
     * @dev Cancel a proposal. A proposal is cancellable by the proposer, but only while it is Pending state, i.e.
     * before the vote starts.
     *
     * Emits a {ProposalCanceled} event.
     */
    function cancel(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) external returns (uint256 proposalId);

    /**
     * @dev Cast a vote
     *
     * Emits a {VoteCast} event.
     */
    function castVote(uint256 proposalId, uint8 support) external returns (uint256 balance);

    /**
     * @dev Cast a vote with a reason
     *
     * Emits a {VoteCast} event.
     */
    function castVoteWithReason(
        uint256 proposalId,
        uint8 support,
        string calldata reason
    ) external returns (uint256 balance);

    /**
     * @dev Cast a vote with a reason and additional encoded parameters
     *
     * Emits a {VoteCast} or {VoteCastWithParams} event depending on the length of params.
     */
    function castVoteWithReasonAndParams(
        uint256 proposalId,
        uint8 support,
        string calldata reason,
        bytes memory params
    ) external returns (uint256 balance);

    /**
     * @dev Cast a vote using the voter's signature, including ERC-1271 signature support.
     *
     * Emits a {VoteCast} event.
     */
    function castVoteBySig(
        uint256 proposalId,
        uint8 support,
        address voter,
        bytes memory signature
    ) external returns (uint256 balance);

    /**
     * @dev Cast a vote with a reason and additional encoded parameters using the voter's signature,
     * including ERC-1271 signature support.
     *
     * Emits a {VoteCast} or {VoteCastWithParams} event depending on the length of params.
     */
    function castVoteWithReasonAndParamsBySig(
        uint256 proposalId,
        uint8 support,
        address voter,
        string calldata reason,
        bytes memory params,
        bytes memory signature
    ) external returns (uint256 balance);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.20;

import {Strings} from "../Strings.sol";

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Nonces.sol)
pragma solidity ^0.8.20;

/**
 * @dev Provides tracking nonces for addresses. Nonces will only increment.
 */
abstract contract Nonces {
    /**
     * @dev The nonce used for an `account` is not the expected current nonce.
     */
    error InvalidAccountNonce(address account, uint256 currentNonce);

    mapping(address account => uint256) private _nonces;

    /**
     * @dev Returns the next unused nonce for an address.
     */
    function nonces(address owner) public view virtual returns (uint256) {
        return _nonces[owner];
    }

    /**
     * @dev Consumes a nonce.
     *
     * Returns the current value and increments nonce.
     */
    function _useNonce(address owner) internal virtual returns (uint256) {
        // For each account, the nonce has an initial value of 0, can only be incremented by one, and cannot be
        // decremented or reset. This guarantees that the nonce never overflows.
        unchecked {
            // It is important to do x++ and not ++x here.
            return _nonces[owner]++;
        }
    }

    /**
     * @dev Same as {_useNonce} but checking that `nonce` is the next valid for `owner`.
     */
    function _useCheckedNonce(address owner, uint256 nonce) internal virtual {
        uint256 current = _useNonce(owner);
        if (nonce != current) {
            revert InvalidAccountNonce(owner, current);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
    /**
     * @dev Value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

    /**
     * @dev An int value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedIntToUint(int256 value);

    /**
     * @dev Value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

    /**
     * @dev An uint value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedUintToInt(uint256 value);

    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        if (value > type(uint248).max) {
            revert SafeCastOverflowedUintDowncast(248, value);
        }
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        if (value > type(uint240).max) {
            revert SafeCastOverflowedUintDowncast(240, value);
        }
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        if (value > type(uint232).max) {
            revert SafeCastOverflowedUintDowncast(232, value);
        }
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        if (value > type(uint224).max) {
            revert SafeCastOverflowedUintDowncast(224, value);
        }
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        if (value > type(uint216).max) {
            revert SafeCastOverflowedUintDowncast(216, value);
        }
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        if (value > type(uint208).max) {
            revert SafeCastOverflowedUintDowncast(208, value);
        }
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        if (value > type(uint200).max) {
            revert SafeCastOverflowedUintDowncast(200, value);
        }
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        if (value > type(uint192).max) {
            revert SafeCastOverflowedUintDowncast(192, value);
        }
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        if (value > type(uint184).max) {
            revert SafeCastOverflowedUintDowncast(184, value);
        }
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        if (value > type(uint176).max) {
            revert SafeCastOverflowedUintDowncast(176, value);
        }
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        if (value > type(uint168).max) {
            revert SafeCastOverflowedUintDowncast(168, value);
        }
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        if (value > type(uint160).max) {
            revert SafeCastOverflowedUintDowncast(160, value);
        }
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        if (value > type(uint152).max) {
            revert SafeCastOverflowedUintDowncast(152, value);
        }
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        if (value > type(uint144).max) {
            revert SafeCastOverflowedUintDowncast(144, value);
        }
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        if (value > type(uint136).max) {
            revert SafeCastOverflowedUintDowncast(136, value);
        }
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        if (value > type(uint128).max) {
            revert SafeCastOverflowedUintDowncast(128, value);
        }
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        if (value > type(uint120).max) {
            revert SafeCastOverflowedUintDowncast(120, value);
        }
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        if (value > type(uint112).max) {
            revert SafeCastOverflowedUintDowncast(112, value);
        }
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        if (value > type(uint104).max) {
            revert SafeCastOverflowedUintDowncast(104, value);
        }
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        if (value > type(uint96).max) {
            revert SafeCastOverflowedUintDowncast(96, value);
        }
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        if (value > type(uint88).max) {
            revert SafeCastOverflowedUintDowncast(88, value);
        }
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        if (value > type(uint80).max) {
            revert SafeCastOverflowedUintDowncast(80, value);
        }
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        if (value > type(uint72).max) {
            revert SafeCastOverflowedUintDowncast(72, value);
        }
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        if (value > type(uint64).max) {
            revert SafeCastOverflowedUintDowncast(64, value);
        }
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        if (value > type(uint56).max) {
            revert SafeCastOverflowedUintDowncast(56, value);
        }
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        if (value > type(uint48).max) {
            revert SafeCastOverflowedUintDowncast(48, value);
        }
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        if (value > type(uint40).max) {
            revert SafeCastOverflowedUintDowncast(40, value);
        }
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        if (value > type(uint32).max) {
            revert SafeCastOverflowedUintDowncast(32, value);
        }
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        if (value > type(uint24).max) {
            revert SafeCastOverflowedUintDowncast(24, value);
        }
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        if (value > type(uint16).max) {
            revert SafeCastOverflowedUintDowncast(16, value);
        }
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        if (value > type(uint8).max) {
            revert SafeCastOverflowedUintDowncast(8, value);
        }
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        if (value < 0) {
            revert SafeCastOverflowedIntToUint(value);
        }
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(248, value);
        }
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(240, value);
        }
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(232, value);
        }
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(224, value);
        }
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(216, value);
        }
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(208, value);
        }
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(200, value);
        }
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(192, value);
        }
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(184, value);
        }
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(176, value);
        }
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(168, value);
        }
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(160, value);
        }
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(152, value);
        }
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(144, value);
        }
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(136, value);
        }
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(128, value);
        }
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(120, value);
        }
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(112, value);
        }
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(104, value);
        }
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(96, value);
        }
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(88, value);
        }
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(80, value);
        }
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(72, value);
        }
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(64, value);
        }
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(56, value);
        }
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(48, value);
        }
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(40, value);
        }
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(32, value);
        }
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(24, value);
        }
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(16, value);
        }
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(8, value);
        }
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        if (value > uint256(type(int256).max)) {
            revert SafeCastOverflowedUintToInt(value);
        }
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ShortStrings.sol)

pragma solidity ^0.8.20;

import {StorageSlot} from "./StorageSlot.sol";

// | string  | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA   |
// | length  | 0x                                                              BB |
type ShortString is bytes32;

/**
 * @dev This library provides functions to convert short memory strings
 * into a `ShortString` type that can be used as an immutable variable.
 *
 * Strings of arbitrary length can be optimized using this library if
 * they are short enough (up to 31 bytes) by packing them with their
 * length (1 byte) in a single EVM word (32 bytes). Additionally, a
 * fallback mechanism can be used for every other case.
 *
 * Usage example:
 *
 * ```solidity
 * contract Named {
 *     using ShortStrings for *;
 *
 *     ShortString private immutable _name;
 *     string private _nameFallback;
 *
 *     constructor(string memory contractName) {
 *         _name = contractName.toShortStringWithFallback(_nameFallback);
 *     }
 *
 *     function name() external view returns (string memory) {
 *         return _name.toStringWithFallback(_nameFallback);
 *     }
 * }
 * ```
 */
library ShortStrings {
    // Used as an identifier for strings longer than 31 bytes.
    bytes32 private constant FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;

    error StringTooLong(string str);
    error InvalidShortString();

    /**
     * @dev Encode a string of at most 31 chars into a `ShortString`.
     *
     * This will trigger a `StringTooLong` error is the input string is too long.
     */
    function toShortString(string memory str) internal pure returns (ShortString) {
        bytes memory bstr = bytes(str);
        if (bstr.length > 31) {
            revert StringTooLong(str);
        }
        return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));
    }

    /**
     * @dev Decode a `ShortString` back to a "normal" string.
     */
    function toString(ShortString sstr) internal pure returns (string memory) {
        uint256 len = byteLength(sstr);
        // using `new string(len)` would work locally but is not memory safe.
        string memory str = new string(32);
        /// @solidity memory-safe-assembly
        assembly {
            mstore(str, len)
            mstore(add(str, 0x20), sstr)
        }
        return str;
    }

    /**
     * @dev Return the length of a `ShortString`.
     */
    function byteLength(ShortString sstr) internal pure returns (uint256) {
        uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;
        if (result > 31) {
            revert InvalidShortString();
        }
        return result;
    }

    /**
     * @dev Encode a string into a `ShortString`, or write it to storage if it is too long.
     */
    function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {
        if (bytes(value).length < 32) {
            return toShortString(value);
        } else {
            StorageSlot.getStringSlot(store).value = value;
            return ShortString.wrap(FALLBACK_SENTINEL);
        }
    }

    /**
     * @dev Decode a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     */
    function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return toString(value);
        } else {
            return store;
        }
    }

    /**
     * @dev Return the length of a string that was encoded to `ShortString` or written to storage using
     * {setWithFallback}.
     *
     * WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of
     * actual characters as the UTF-8 encoding of a single character can span over multiple bytes.
     */
    function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return byteLength(value);
        } else {
            return bytes(store).length;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/SignatureChecker.sol)

pragma solidity ^0.8.20;

import {ECDSA} from "./ECDSA.sol";
import {IERC1271} from "../../interfaces/IERC1271.sol";

/**
 * @dev Signature verification helper that can be used instead of `ECDSA.recover` to seamlessly support both ECDSA
 * signatures from externally owned accounts (EOAs) as well as ERC1271 signatures from smart contract wallets like
 * Argent and Safe Wallet (previously Gnosis Safe).
 */
library SignatureChecker {
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. If the signer is a smart contract, the
     * signature is validated against that smart contract using ERC1271, otherwise it's validated using `ECDSA.recover`.
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidSignatureNow(address signer, bytes32 hash, bytes memory signature) internal view returns (bool) {
        (address recovered, ECDSA.RecoverError error, ) = ECDSA.tryRecover(hash, signature);
        return
            (error == ECDSA.RecoverError.NoError && recovered == signer) ||
            isValidERC1271SignatureNow(signer, hash, signature);
    }

    /**
     * @dev Checks if a signature is valid for a given signer and data hash. The signature is validated
     * against the signer smart contract using ERC1271.
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidERC1271SignatureNow(
        address signer,
        bytes32 hash,
        bytes memory signature
    ) internal view returns (bool) {
        (bool success, bytes memory result) = signer.staticcall(
            abi.encodeCall(IERC1271.isValidSignature, (hash, signature))
        );
        return (success &&
            result.length >= 32 &&
            abi.decode(result, (bytes32)) == bytes32(IERC1271.isValidSignature.selector));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)

pragma solidity ^0.8.20;

import {Math} from "./math/Math.sol";
import {SignedMath} from "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}