// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)pragmasolidity ^0.8.1;/**
* @dev Collection of functions related to the address type
*/libraryAddress{
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/functionisContract(address account) internalviewreturns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0// for contracts in construction, since the code is only stored at the end// of the constructor execution.return account.code.length>0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/functionsendValue(addresspayable recipient, uint256 amount) internal{
require(address(this).balance>= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/functionfunctionCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target,
bytesmemory data,
uint256 value
) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target,
bytesmemory data,
uint256 value,
stringmemory errorMessage
) internalreturns (bytesmemory) {
require(address(this).balance>= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytesmemory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target, bytesmemory data) internalviewreturns (bytesmemory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalviewreturns (bytesmemory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytesmemory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/functionfunctionDelegateCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/functionfunctionDelegateCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalreturns (bytesmemory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytesmemory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/functionverifyCallResult(bool success,
bytesmemory returndata,
stringmemory errorMessage
) internalpurereturns (bytesmemory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if presentif (returndata.length>0) {
// The easiest way to bubble the revert reason is using memory via assembly/// @solidity memory-safe-assemblyassembly {
let returndata_size :=mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
Contract Source Code
File 2 of 13: ChrNFT.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.0;import"@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import"@openzeppelin/contracts/access/Ownable.sol";
/**
* @title The Lost Keys Of Chronos contract
* @dev Extends ERC721 Non-Fungible Token Standard basic implementation
*/contractChrNFTisERC721Enumerable, Ownable{
// Base URIstringprivate _baseURIextended;
uint256public reservedAmount;
uint256public MAX_SUPPLY; //5555uint256public NFT_PRICE; //0.35 ethuint256public NFT_PRICE_WL; //0.325 ethuint256public MAX_RESERVE =1945; // 30% of Max supply for private investors (0.3 eth each), 5% to team/treasuryaddresspublic MULTISIG =0x345E50e9B192fB77eA2c789d9b486FD425441FdD;
uint256private WL1_MAX =1;
uint256private WL2_MAX =2;
uint256private OG1_MAX =5;
uint256private OG2_MAX =10;
uint256private PUBLIC_MAX =20;
uint256public PHASE1_START =1680105600;
uint256public PHASE2_START = PHASE1_START +2hours;
uint256public PHASE3_START = PHASE2_START +2hours;
uint256public MINT_PHASE_END = PHASE3_START +2days;
mapping(address=>bool) public isWhitelisted;
mapping(address=>bool) public isOgUser;
mapping(address=>uint256) private firstMint;
mapping(address=>uint256) private secondMint;
mapping(address=>uint256) private thirdMint;
mapping(address=>uint256) public originalMinters;
constructor(uint256 _maxSupply, // 5555uint256 _NFT_PRICE_WL, // 0.325 ethuint256 _NFT_PRICE // 0.35 eth) ERC721("The Lost Keys Of Chronos", "chrNFT") {
MAX_SUPPLY = _maxSupply;
NFT_PRICE = _NFT_PRICE;
NFT_PRICE_WL = _NFT_PRICE_WL;
}
functionwithdraw() externalonlyOwner{
(bool withdrawMultiSig, ) = MULTISIG.call{value: address(this).balance}("");
require(withdrawMultiSig, "Withdraw Failed.");
}
functionsetWhitelist(address[] memory _users ) publiconlyOwner{
for (uint256 i =0; i < _users.length; i++) {
isWhitelisted[_users[i]] =true;
}
}
functionsetOgUser(address[] memory _users ) publiconlyOwner{
for (uint256 i =0; i < _users.length; i++) {
isOgUser[_users[i]] =true;
}
}
functionremoveWhitelist(address[] memory _users ) publiconlyOwner{
for (uint256 i =0; i < _users.length; i++) {
isWhitelisted[_users[i]] =false;
}
}
functionremoveOgUser(address[] memory _users ) publiconlyOwner{
for (uint256 i =0; i < _users.length; i++) {
isOgUser[_users[i]] =false;
}
}
/**
* Mint NFTs by owner to private investors.(They paid 0.3/ NFT eth before the launch to our multisig by hand)
*/functionreserveNFTs(address[] memory _to, uint256[] memory _amount) externalonlyOwner{
require( _to.length!=0 , "Invalid length.");
require( _to.length== _amount.length , "Different length.");
require( currentRound() ==4|| totalSupply() >= MAX_SUPPLY-MAX_RESERVE, "Mint for private can only be done after mintin end or sold out" );
for (uint i=0; i < _to.length; i++) {
require(_to[i] !=address(0), "Invalid address.");
require(_amount[i] !=0, "Invalid amount.");
require(reservedAmount + _amount[i] <= MAX_RESERVE, "Invalid amount.");
for (uint256 u =0; u < _amount[i]; u++) {
if (totalSupply() < MAX_SUPPLY) {
_mint(_to[i], totalSupply()+1);
}
}
reservedAmount = reservedAmount + _amount[i];
originalMinters[_to[i]] = originalMinters[_to[i]] + _amount[i];
}
}
/**
* @dev Return the base URI
*/function_baseURI() internalviewvirtualoverridereturns (stringmemory) {
return _baseURIextended;
}
/**
* @dev Return the base URI
*/functionbaseURI() externalviewreturns (stringmemory) {
return _baseURI();
}
/**
* @dev Set the base URI
*/functionsetBaseURI(stringmemory baseURI_) externalonlyOwner{
_baseURIextended = baseURI_;
}
/**
* Get the array of token for owner.
*/functiontokensOfOwner(address _owner) externalviewreturns (uint256[] memory) {
uint256 tokenCount = balanceOf(_owner);
if (tokenCount ==0) {
returnnewuint256[](0);
} else {
uint256[] memory result =newuint256[](tokenCount);
for (uint256 index; index < tokenCount; index++) {
result[index] = tokenOfOwnerByIndex(_owner, index);
}
return result;
}
}
functioncurrentRound() publicviewreturns(uint256) {
if ( block.timestamp< PHASE1_START ) return0; // not startedif ( block.timestamp< PHASE2_START ) return1; // phase 1: WL 1, OG 5if ( block.timestamp< PHASE3_START ) return2; // phase 2: WL 2, OG 10if ( block.timestamp< MINT_PHASE_END ) return3; // phase 3 Public, max 20return4; // minting finished
}
functionmint(uint256 amount) publicpayable{
uint round = currentRound();
uint price;
require(round !=0, "Sale has not started yet.");
require(round !=4, "Sale has ended.");
uint256 maxAmount = maxMint(msg.sender);
require(amount !=0, "You have to mint at least 1 NFT.");
require(amount <= maxAmount, "You can't mint that much NFTs in this round.");
if (round ==1) {
firstMint[msg.sender] = firstMint[msg.sender] + amount;
price = NFT_PRICE_WL;
} elseif (round ==2) {
secondMint[msg.sender] = secondMint[msg.sender] + amount;
price = NFT_PRICE_WL;
} else {
thirdMint[msg.sender] = thirdMint[msg.sender] + amount;
price = NFT_PRICE;
}
require(price * amount ==msg.value, "ETH value sent is not correct");
originalMinters[msg.sender] = originalMinters[msg.sender] + amount;
_mintTo(msg.sender, amount);
}
function_mintTo(address account, uint amount) internal{
require(totalSupply() + MAX_RESERVE + amount <= MAX_SUPPLY, "Mint would exceed max supply.");
for (uint256 i =0; i < amount; i++) {
if ( totalSupply() < MAX_SUPPLY) {
_safeMint(account, totalSupply() +1 );
}
}
}
functionmaxMint(address user) publicviewreturns (uint max){
uint round = currentRound();
if ( round ==0|| round ==4 ) return0; // no mint if minting phase hasn't started/ has finished.if ( round ==1 ) {
if (isOgUser[user]) return OG1_MAX - firstMint[user]; // Og Users can mint 5 chrNFTs maximum on the first round.if (isWhitelisted[user]) return WL1_MAX - firstMint[user]; // Whitelist Users can mint 1 chrNFT maximum on the first round.return0;
}
if ( round ==2 ) {
if (isOgUser[user]) return OG2_MAX - secondMint[user]; // Og Users can mint 10 chrNFTs maximum on the second round.if (isWhitelisted[user]) return WL2_MAX - secondMint[user]; // Whitelist Users can mint 2 chrNFTs maximum on the second round.return0;
}
if ( MAX_SUPPLY-MAX_RESERVE-totalSupply() <20 ) return MAX_SUPPLY-MAX_RESERVE-totalSupply()-thirdMint[user];
return PUBLIC_MAX - thirdMint[user]; // everyone can mint 20 chrNFTs maximum on the third round.
}
/*
Allow Trade of NFTs after Minting ends.
Reason to disallow trading during minting phase:
chrNFT is an NFT that will give rewards both to holders and original minters.
If someone mints for 0.35 eth, instantly sells the minted NFT for 0.35 and repeat that several times,
he could have end up spending 0 eth, but he would still receive the minting rewards (future token airdrop).
To discourage that behaviour we have decided to cut that loophole by disallowing Trading during the minting phase.
That's the reason why we override those functions:
*/function_transfer(addressfrom,
address to,
uint256 tokenId
) internaloverride{
require( (currentRound() ==4) || (totalSupply() == MAX_SUPPLY), "Trading not allowed during Minting phase. ");
super._transfer(from,to,tokenId);
}
function_approve(address to, uint256 tokenId) internaloverride{
require( (currentRound() ==4) || (totalSupply() == MAX_SUPPLY), "Trading not allowed during Minting phase. ");
super._approve(to,tokenId);
}
function_setApprovalForAll(address owner,
address operator,
bool approved
) internaloverride{
require( (currentRound() ==4) || (totalSupply() == MAX_SUPPLY), "Trading not allowed during Minting phase. ");
super._setApprovalForAll(owner,operator,approved);
}
}
Contract Source Code
File 3 of 13: Context.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)pragmasolidity ^0.8.0;/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/abstractcontractContext{
function_msgSender() internalviewvirtualreturns (address) {
returnmsg.sender;
}
function_msgData() internalviewvirtualreturns (bytescalldata) {
returnmsg.data;
}
}
Contract Source Code
File 4 of 13: ERC165.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)pragmasolidity ^0.8.0;import"./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/abstractcontractERC165isIERC165{
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverridereturns (bool) {
return interfaceId ==type(IERC165).interfaceId;
}
}
Contract Source Code
File 5 of 13: ERC721.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/ERC721.sol)pragmasolidity ^0.8.0;import"./IERC721.sol";
import"./IERC721Receiver.sol";
import"./extensions/IERC721Metadata.sol";
import"../../utils/Address.sol";
import"../../utils/Context.sol";
import"../../utils/Strings.sol";
import"../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/contractERC721isContext, ERC165, IERC721, IERC721Metadata{
usingAddressforaddress;
usingStringsforuint256;
// Token namestringprivate _name;
// Token symbolstringprivate _symbol;
// Mapping from token ID to owner addressmapping(uint256=>address) private _owners;
// Mapping owner address to token countmapping(address=>uint256) private _balances;
// Mapping from token ID to approved addressmapping(uint256=>address) private _tokenApprovals;
// Mapping from owner to operator approvalsmapping(address=>mapping(address=>bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/constructor(stringmemory name_, stringmemory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverride(ERC165, IERC165) returns (bool) {
return
interfaceId ==type(IERC721).interfaceId||
interfaceId ==type(IERC721Metadata).interfaceId||super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/functionbalanceOf(address owner) publicviewvirtualoverridereturns (uint256) {
require(owner !=address(0), "ERC721: address zero is not a valid owner");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/functionownerOf(uint256 tokenId) publicviewvirtualoverridereturns (address) {
address owner = _owners[tokenId];
require(owner !=address(0), "ERC721: invalid token ID");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/functionname() publicviewvirtualoverridereturns (stringmemory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/functionsymbol() publicviewvirtualoverridereturns (stringmemory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/functiontokenURI(uint256 tokenId) publicviewvirtualoverridereturns (stringmemory) {
_requireMinted(tokenId);
stringmemory baseURI = _baseURI();
returnbytes(baseURI).length>0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overridden in child contracts.
*/function_baseURI() internalviewvirtualreturns (stringmemory) {
return"";
}
/**
* @dev See {IERC721-approve}.
*/functionapprove(address to, uint256 tokenId) publicvirtualoverride{
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not token owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/functiongetApproved(uint256 tokenId) publicviewvirtualoverridereturns (address) {
_requireMinted(tokenId);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/functionsetApprovalForAll(address operator, bool approved) publicvirtualoverride{
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/functionisApprovedForAll(address owner, address operator) publicviewvirtualoverridereturns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/functiontransferFrom(addressfrom,
address to,
uint256 tokenId
) publicvirtualoverride{
//solhint-disable-next-line max-line-lengthrequire(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 tokenId
) publicvirtualoverride{
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 tokenId,
bytesmemory data
) publicvirtualoverride{
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner nor approved");
_safeTransfer(from, to, tokenId, data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/function_safeTransfer(addressfrom,
address to,
uint256 tokenId,
bytesmemory data
) internalvirtual{
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/function_exists(uint256 tokenId) internalviewvirtualreturns (bool) {
return _owners[tokenId] !=address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/function_isApprovedOrOwner(address spender, uint256 tokenId) internalviewvirtualreturns (bool) {
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/function_safeMint(address to, uint256 tokenId) internalvirtual{
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/function_safeMint(address to,
uint256 tokenId,
bytesmemory data
) internalvirtual{
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/function_mint(address to, uint256 tokenId) internalvirtual{
require(to !=address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] +=1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/function_burn(uint256 tokenId) internalvirtual{
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -=1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/function_transfer(addressfrom,
address to,
uint256 tokenId
) internalvirtual{
require(ERC721.ownerOf(tokenId) ==from, "ERC721: transfer from incorrect owner");
require(to !=address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -=1;
_balances[to] +=1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/function_approve(address to, uint256 tokenId) internalvirtual{
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/function_setApprovalForAll(address owner,
address operator,
bool approved
) internalvirtual{
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Reverts if the `tokenId` has not been minted yet.
*/function_requireMinted(uint256 tokenId) internalviewvirtual{
require(_exists(tokenId), "ERC721: invalid token ID");
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/function_checkOnERC721Received(addressfrom,
address to,
uint256 tokenId,
bytesmemory data
) privatereturns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytesmemory reason) {
if (reason.length==0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
/// @solidity memory-safe-assemblyassembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
returntrue;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/function_beforeTokenTransfer(addressfrom,
address to,
uint256 tokenId
) internalvirtual{}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/function_afterTokenTransfer(addressfrom,
address to,
uint256 tokenId
) internalvirtual{}
}
Contract Source Code
File 6 of 13: ERC721Enumerable.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)pragmasolidity ^0.8.0;import"../ERC721.sol";
import"./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/abstractcontractERC721EnumerableisERC721, IERC721Enumerable{
// Mapping from owner to list of owned token IDsmapping(address=>mapping(uint256=>uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens listmapping(uint256=>uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumerationuint256[] private _allTokens;
// Mapping from token id to position in the allTokens arraymapping(uint256=>uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverride(IERC165, ERC721) returns (bool) {
return interfaceId ==type(IERC721Enumerable).interfaceId||super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/functiontokenOfOwnerByIndex(address owner, uint256 index) publicviewvirtualoverridereturns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/functiontotalSupply() publicviewvirtualoverridereturns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/functiontokenByIndex(uint256 index) publicviewvirtualoverridereturns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/function_beforeTokenTransfer(addressfrom,
address to,
uint256 tokenId
) internalvirtualoverride{
super._beforeTokenTransfer(from, to, tokenId);
if (from==address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} elseif (from!= to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to ==address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} elseif (to !=from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/function_addTokenToOwnerEnumeration(address to, uint256 tokenId) private{
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/function_addTokenToAllTokensEnumeration(uint256 tokenId) private{
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/function_removeTokenFromOwnerEnumeration(addressfrom, uint256 tokenId) private{
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and// then delete the last slot (swap and pop).uint256 lastTokenIndex = ERC721.balanceOf(from) -1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessaryif (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the arraydelete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/function_removeTokenFromAllTokensEnumeration(uint256 tokenId) private{
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and// then delete the last slot (swap and pop).uint256 lastTokenIndex = _allTokens.length-1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding// an 'if' statement (like in _removeTokenFromOwnerEnumeration)uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index// This also deletes the contents at the last position of the arraydelete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
Contract Source Code
File 7 of 13: IERC165.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)pragmasolidity ^0.8.0;/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/interfaceIERC165{
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/functionsupportsInterface(bytes4 interfaceId) externalviewreturns (bool);
}
Contract Source Code
File 8 of 13: IERC721.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)pragmasolidity ^0.8.0;import"../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/interfaceIERC721isIERC165{
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/eventTransfer(addressindexedfrom, addressindexed to, uint256indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/eventApproval(addressindexed owner, addressindexed approved, uint256indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/eventApprovalForAll(addressindexed owner, addressindexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/functionbalanceOf(address owner) externalviewreturns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/functionownerOf(uint256 tokenId) externalviewreturns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 tokenId,
bytescalldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/functiontransferFrom(addressfrom,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/functionapprove(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/functionsetApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/functiongetApproved(uint256 tokenId) externalviewreturns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/functionisApprovedForAll(address owner, address operator) externalviewreturns (bool);
}
Contract Source Code
File 9 of 13: IERC721Enumerable.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)pragmasolidity ^0.8.0;import"../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/interfaceIERC721EnumerableisIERC721{
/**
* @dev Returns the total amount of tokens stored by the contract.
*/functiontotalSupply() externalviewreturns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/functiontokenOfOwnerByIndex(address owner, uint256 index) externalviewreturns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/functiontokenByIndex(uint256 index) externalviewreturns (uint256);
}
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)pragmasolidity ^0.8.0;/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/interfaceIERC721Receiver{
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/functiononERC721Received(address operator,
addressfrom,
uint256 tokenId,
bytescalldata data
) externalreturns (bytes4);
}
Contract Source Code
File 12 of 13: Ownable.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)pragmasolidity ^0.8.0;import"../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/abstractcontractOwnableisContext{
addressprivate _owner;
eventOwnershipTransferred(addressindexed previousOwner, addressindexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/modifieronlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/functionowner() publicviewvirtualreturns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/function_checkOwner() internalviewvirtual{
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/functionrenounceOwnership() publicvirtualonlyOwner{
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/functiontransferOwnership(address newOwner) publicvirtualonlyOwner{
require(newOwner !=address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/function_transferOwnership(address newOwner) internalvirtual{
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
Contract Source Code
File 13 of 13: Strings.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)pragmasolidity ^0.8.0;/**
* @dev String operations.
*/libraryStrings{
bytes16privateconstant _HEX_SYMBOLS ="0123456789abcdef";
uint8privateconstant _ADDRESS_LENGTH =20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/functiontoString(uint256 value) internalpurereturns (stringmemory) {
// Inspired by OraclizeAPI's implementation - MIT licence// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.solif (value ==0) {
return"0";
}
uint256 temp = value;
uint256 digits;
while (temp !=0) {
digits++;
temp /=10;
}
bytesmemory buffer =newbytes(digits);
while (value !=0) {
digits -=1;
buffer[digits] =bytes1(uint8(48+uint256(value %10)));
value /=10;
}
returnstring(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/functiontoHexString(uint256 value) internalpurereturns (stringmemory) {
if (value ==0) {
return"0x00";
}
uint256 temp = value;
uint256 length =0;
while (temp !=0) {
length++;
temp >>=8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/functiontoHexString(uint256 value, uint256 length) internalpurereturns (stringmemory) {
bytesmemory buffer =newbytes(2* length +2);
buffer[0] ="0";
buffer[1] ="x";
for (uint256 i =2* length +1; i >1; --i) {
buffer[i] = _HEX_SYMBOLS[value &0xf];
value >>=4;
}
require(value ==0, "Strings: hex length insufficient");
returnstring(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/functiontoHexString(address addr) internalpurereturns (stringmemory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}