///SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(
        address sender,
        uint256 balance,
        uint256 needed
    );

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(
        address spender,
        uint256 allowance,
        uint256 needed
    );

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 value
    ) external returns (bool);
}

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender)
        public
        view
        virtual
        returns (uint256)
    {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value)
        public
        virtual
        returns (bool)
    {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 value
    ) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(
        address from,
        address to,
        uint256 value
    ) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(
        address owner,
        address spender,
        uint256 value,
        bool emitEvent
    ) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 value
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(
                    spender,
                    currentAllowance,
                    value
                );
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// uniswap v2 factory iterface
interface IUniswapV2Factory {
    function createPair(address tokenA, address tokenB)
        external
        returns (address pair);

    function getPair(address tokenA, address tokenB)
        external
        view
        returns (address pair);
}

/// uniswap v2 router interface
interface IUniswapV2Router02 {
    function factory() external pure returns (address);

    function WETH() external pure returns (address);

    function getAmountsOut(uint256 amountIn, address[] calldata path)
        external
        view
        returns (uint256[] memory amounts);

    function getAmountsIn(uint256 amountOut, address[] calldata path)
        external
        view
        returns (uint256[] memory amounts);

    function addLiquidityETH(
        address token,
        uint256 amountTokenDesired,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    )
        external
        payable
        returns (
            uint256 amountToken,
            uint256 amountETH,
            uint256 liquidity
        );

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;

    function swapExactETHForTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable returns (uint256[] memory amounts);

    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable;

    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;
}

/// iterable mapping

library IterableMapping {
    // Iterable mapping from address to uint;
    struct Map {
        address[] keys;
        mapping(address => uint256) values;
        mapping(address => uint256) indexOf;
        mapping(address => bool) inserted;
    }

    function get(Map storage map, address key) internal view returns (uint256) {
        return map.values[key];
    }

    function getIndexOfKey(Map storage map, address key)
        internal
        view
        returns (int256)
    {
        if (!map.inserted[key]) {
            return -1;
        }
        return int256(map.indexOf[key]);
    }

    function getKeyAtIndex(Map storage map, uint256 index)
        internal
        view
        returns (address)
    {
        return map.keys[index];
    }

    function size(Map storage map) internal view returns (uint256) {
        return map.keys.length;
    }

    function set(
        Map storage map,
        address key,
        uint256 val
    ) internal {
        if (map.inserted[key]) {
            map.values[key] = val;
        } else {
            map.inserted[key] = true;
            map.values[key] = val;
            map.indexOf[key] = map.keys.length;
            map.keys.push(key);
        }
    }

    function remove(Map storage map, address key) internal {
        if (!map.inserted[key]) {
            return;
        }

        delete map.inserted[key];
        delete map.values[key];

        uint256 index = map.indexOf[key];
        uint256 lastIndex = map.keys.length - 1;
        address lastKey = map.keys[lastIndex];

        map.indexOf[lastKey] = index;
        delete map.indexOf[key];

        map.keys[index] = lastKey;
        map.keys.pop();
    }
}

/// @title Dividend-Paying Token Optional Interface
/// @author Roger Wu (https://github.com/roger-wu)
/// @dev OPTIONAL functions for a dividend-paying token contract.
interface DividendPayingTokenOptionalInterface {
    /// @notice View the amount of dividend in wei that an address can withdraw.
    /// @param _owner The address of a token holder.
    /// @return The amount of dividend in wei that `_owner` can withdraw.
    function withdrawableDividendOf(address _owner)
        external
        view
        returns (uint256);

    /// @notice View the amount of dividend in wei that an address has withdrawn.
    /// @param _owner The address of a token holder.
    /// @return The amount of dividend in wei that `_owner` has withdrawn.
    function withdrawnDividendOf(address _owner)
        external
        view
        returns (uint256);

    /// @notice View the amount of dividend in wei that an address has earned in total.
    /// @dev accumulativeDividendOf(_owner) = withdrawableDividendOf(_owner) + withdrawnDividendOf(_owner)
    /// @param _owner The address of a token holder.
    /// @return The amount of dividend in wei that `_owner` has earned in total.
    function accumulativeDividendOf(address _owner)
        external
        view
        returns (uint256);
}

/// @title Dividend-Paying Token Interface
/// @author Roger Wu (https://github.com/roger-wu)
/// @dev An interface for a dividend-paying token contract.
interface DividendPayingTokenInterface {
    /// @notice View the amount of dividend in wei that an address can withdraw.
    /// @param _owner The address of a token holder.
    /// @return The amount of dividend in wei that `_owner` can withdraw.
    function dividendOf(address _owner) external view returns (uint256);

    /// @notice Distributes ether to token holders as dividends.
    /// @dev SHOULD distribute the paid ether to token holders as dividends.
    ///  SHOULD NOT directly transfer ether to token holders in this function.
    ///  MUST emit a `DividendsDistributed` event when the amount of distributed ether is greater than 0.
    function distributeDividends() external payable;

    /// @notice Withdraws the ether distributed to the sender.
    /// @dev SHOULD transfer `dividendOf(msg.sender)` wei to `msg.sender`, and `dividendOf(msg.sender)` SHOULD be 0 after the transfer.
    ///  MUST emit a `DividendWithdrawn` event if the amount of ether transferred is greater than 0.
    function withdrawDividend() external;

    /// @dev This event MUST emit when ether is distributed to token holders.
    /// @param from The address which sends ether to this contract.
    /// @param weiAmount The amount of distributed ether in wei.
    event DividendsDistributed(address indexed from, uint256 weiAmount);

    /// @dev This event MUST emit when an address withdraws their dividend.
    /// @param to The address which withdraws ether from this contract.
    /// @param weiAmount The amount of withdrawn ether in wei.
    event DividendWithdrawn(address indexed to, uint256 weiAmount);
}

/**
 * @title SafeMathInt
 * @dev Math operations for int256 with overflow safety checks.
 */
library SafeMathInt {
    int256 private constant MIN_INT256 = int256(1) << 255;
    int256 private constant MAX_INT256 = ~(int256(1) << 255);

    /**
     * @dev Multiplies two int256 variables and fails on overflow.
     */
    function mul(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a * b;

        // Detect overflow when multiplying MIN_INT256 with -1
        require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256));
        require((b == 0) || (c / b == a));
        return c;
    }

    /**
     * @dev Division of two int256 variables and fails on overflow.
     */
    function div(int256 a, int256 b) internal pure returns (int256) {
        // Prevent overflow when dividing MIN_INT256 by -1
        require(b != -1 || a != MIN_INT256);

        // Solidity already throws when dividing by 0.
        return a / b;
    }

    /**
     * @dev Subtracts two int256 variables and fails on overflow.
     */
    function sub(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a - b;
        require((b >= 0 && c <= a) || (b < 0 && c > a));
        return c;
    }

    /**
     * @dev Adds two int256 variables and fails on overflow.
     */
    function add(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a + b;
        require((b >= 0 && c >= a) || (b < 0 && c < a));
        return c;
    }

    /**
     * @dev Converts to absolute value, and fails on overflow.
     */
    function abs(int256 a) internal pure returns (int256) {
        require(a != MIN_INT256);
        return a < 0 ? -a : a;
    }

    function toUint256Safe(int256 a) internal pure returns (uint256) {
        require(a >= 0);
        return uint256(a);
    }
}

/**
 * @title SafeMathUint
 * @dev Math operations with safety checks that revert on error
 */
library SafeMathUint {
    function toInt256Safe(uint256 a) internal pure returns (int256) {
        int256 b = int256(a);
        require(b >= 0);
        return b;
    }
}

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

/// @title Dividend-Paying Token
/// @author Roger Wu (https://github.com/roger-wu)
/// @dev modified to make more gas efficient
contract DividendPayingToken is
    Ownable,
    DividendPayingTokenInterface,
    DividendPayingTokenOptionalInterface
{
    using SafeMath for uint256;
    using SafeMathUint for uint256;
    using SafeMathInt for int256;

    // With `magnitude`, we can properly distribute dividends even if the amount of received ether is small.
    // For more discussion about choosing the value of `magnitude`,
    //  see https://github.com/ethereum/EIPs/issues/1726#issuecomment-472352728
    uint256 internal constant magnitude = 2**128;

    uint256 internal magnifiedDividendPerShare;

    // About dividendCorrection:
    // If the token balance of a `_user` is never changed, the dividend of `_user` can be computed with:
    //   `dividendOf(_user) = dividendPerShare * balanceOf(_user)`.
    // When `balanceOf(_user)` is changed (via minting/burning/transferring tokens),
    //   `dividendOf(_user)` should not be changed,
    //   but the computed value of `dividendPerShare * balanceOf(_user)` is changed.
    // To keep the `dividendOf(_user)` unchanged, we add a correction term:
    //   `dividendOf(_user) = dividendPerShare * balanceOf(_user) + dividendCorrectionOf(_user)`,
    //   where `dividendCorrectionOf(_user)` is updated whenever `balanceOf(_user)` is changed:
    //   `dividendCorrectionOf(_user) = dividendPerShare * (old balanceOf(_user)) - (new balanceOf(_user))`.
    // So now `dividendOf(_user)` returns the same value before and after `balanceOf(_user)` is changed.
    mapping(address => int256) internal magnifiedDividendCorrections;
    mapping(address => uint256) internal withdrawnDividends;
    mapping(address => uint256) internal balanceOf;
    uint256 private totalSupply;

    uint256 public totalDividendsDistributed;

    constructor() Ownable(msg.sender) {}

    /// @dev Distributes dividends whenever ether is paid to this contract.
    receive() external payable {
        distributeDividends();
    }

    /// @notice Distributes ether to token holders as dividends.
    /// @dev It reverts if the total supply of tokens is 0.
    /// It emits the `DividendsDistributed` event if the amount of received ether is greater than 0.
    /// About undistributed ether:
    ///   In each distribution, there is a small amount of ether not distributed,
    ///     the magnified amount of which is
    ///     `(msg.value * magnitude) % totalSupply()`.
    ///   With a well-chosen `magnitude`, the amount of undistributed ether
    ///     (de-magnified) in a distribution can be less than 1 wei.
    ///   We can actually keep track of the undistributed ether in a distribution
    ///     and try to distribute it in the next distribution,
    ///     but keeping track of such data on-chain costs much more than
    ///     the saved ether, so we don't do that.
    function distributeDividends() public payable override {
        require(totalSupply > 0);

        if (msg.value > 0) {
            magnifiedDividendPerShare = magnifiedDividendPerShare.add(
                (msg.value).mul(magnitude) / totalSupply
            );
            emit DividendsDistributed(msg.sender, msg.value);

            totalDividendsDistributed = totalDividendsDistributed.add(
                msg.value
            );
        }
    }

    /// @notice Withdraws the ether distributed to the sender.
    /// @dev It emits a `DividendWithdrawn` event if the amount of withdrawn ether is greater than 0.
    function withdrawDividend() public virtual override {
        _withdrawDividendOfUser(payable(msg.sender));
    }

    /// @notice Withdraws the ether distributed to the sender.
    /// @dev It emits a `DividendWithdrawn` event if the amount of withdrawn ether is greater than 0.
    function _withdrawDividendOfUser(address payable user)
        internal
        returns (uint256)
    {
        uint256 _withdrawableDividend = withdrawableDividendOf(user);
        if (_withdrawableDividend > 0) {
            withdrawnDividends[user] = withdrawnDividends[user].add(
                _withdrawableDividend
            );
            emit DividendWithdrawn(user, _withdrawableDividend);
            (bool success, ) = user.call{
                value: _withdrawableDividend,
                gas: 3000
            }("");

            if (!success) {
                withdrawnDividends[user] = withdrawnDividends[user].sub(
                    _withdrawableDividend
                );
                return 0;
            }

            return _withdrawableDividend;
        }

        return 0;
    }

    /// @notice View the amount of dividend in wei that an address can withdraw.
    /// @param _owner The address of a token holder.
    /// @return The amount of dividend in wei that `_owner` can withdraw.
    function dividendOf(address _owner) public view override returns (uint256) {
        return withdrawableDividendOf(_owner);
    }

    /// @notice View the amount of dividend in wei that an address can withdraw.
    /// @param _owner The address of a token holder.
    /// @return The amount of dividend in wei that `_owner` can withdraw.
    function withdrawableDividendOf(address _owner)
        public
        view
        override
        returns (uint256)
    {
        return accumulativeDividendOf(_owner).sub(withdrawnDividends[_owner]);
    }

    /// @notice View the amount of dividend in wei that an address has withdrawn.
    /// @param _owner The address of a token holder.
    /// @return The amount of dividend in wei that `_owner` has withdrawn.
    function withdrawnDividendOf(address _owner)
        public
        view
        override
        returns (uint256)
    {
        return withdrawnDividends[_owner];
    }

    /// @notice View the amount of dividend in wei that an address has earned in total.
    /// @dev accumulativeDividendOf(_owner) = withdrawableDividendOf(_owner) + withdrawnDividendOf(_owner)
    /// = (magnifiedDividendPerShare * balanceOf(_owner) + magnifiedDividendCorrections[_owner]) / magnitude
    /// @param _owner The address of a token holder.
    /// @return The amount of dividend in wei that `_owner` has earned in total.
    function accumulativeDividendOf(address _owner)
        public
        view
        override
        returns (uint256)
    {
        return
            magnifiedDividendPerShare
                .mul(balanceOf[_owner])
                .toInt256Safe()
                .add(magnifiedDividendCorrections[_owner])
                .toUint256Safe() / magnitude;
    }

    /// @dev set the user shares as per there balance, once they have bought more than minimum
    /// required
    /// @param account: user address
    /// @param newBalance: user balance
    function _setBalance(address account, uint256 newBalance) internal {
        uint256 currentBalance = balanceOf[account];

        if (newBalance > currentBalance) {
            uint256 amount = newBalance.sub(currentBalance);
            balanceOf[account] += amount;
            totalSupply += amount;
            magnifiedDividendCorrections[
                account
            ] = magnifiedDividendCorrections[account].sub(
                (magnifiedDividendPerShare.mul(amount)).toInt256Safe()
            );
        } else if (newBalance < currentBalance) {
            uint256 amount = currentBalance.sub(newBalance);
            balanceOf[account] -= amount;
            totalSupply -= amount;
            magnifiedDividendCorrections[
                account
            ] = magnifiedDividendCorrections[account].add(
                (magnifiedDividendPerShare.mul(amount)).toInt256Safe()
            );
        }
    }
}

contract Spyral is ERC20, Ownable {
    ///Custom errors
    error TryAfterNextClaimTime();
    error TradingIsAlreadyLive();
    error CannotClaimNativeToken();
    error TradingIsNotActiveYet();
    error CannotModifyMainPair();
    error OnlyMarketingWalletCanClaim();
    error EthClaimFailed();
    error MAX_FEE_LIMIT_EXCEEDS();
    error NoRewardsAvailableYet();

    /// uniswap v2 router
    IUniswapV2Router02 public uniswapV2Router;
    /// uniswap v2 pair address
    address public uniswapV2Pair;
    /// swapping is active
    bool private swapping;
    /// dividend tracker
    SpyralDividendTracker public dividendTracker;

    /// global burn wallet
    address private constant deadWallet = address(0xdead);
    /// swap threshold at which collected tax is swapped for ether
    uint256 public swapTokensAtAmount = 1e4 * 1e18;
    /// marketing wallet address
    address public marketingWallet = 0xf3cfd872c8E5F2A7Fd615b7E38Ef919D557B396b;

    /// fees variables
    struct BuyFee {
        uint256 ethReward;
        uint256 marketing;
    }

    struct SellFee {
        uint256 ethReward;
        uint256 marketing;
    }

    BuyFee public buyFee;
    SellFee public sellFee;

    // exlcude from fees and max transaction amount
    mapping(address => bool) private _isExcludedFromFees;

    /// events
    event ExcludeFromFees(address indexed account, bool isExcluded);
    event SellFeesUpdated(
        uint256 indexed rewardFee,
        uint256 indexed marketingFee
    );
    event BuyFeesUpdated(uint256 indexed rewardFee, uint256 marketingFee);
    event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
    event MarketingWalletUpdated(
        address indexed newMarketingWallet,
        address indexed oldMarketingWallet
    );
    event SwapAndLiquify(
        uint256 tokensSwapped,
        uint256 ethReceived,
        uint256 ethForDividends
    );

    constructor() ERC20("Spyral", "Spyral") Ownable(msg.sender) {
        dividendTracker = new SpyralDividendTracker();

        IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
            0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D /// uniswap v2 router
        );
        // Create a uniswap pair for this  token
        address _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
            .createPair(address(this), _uniswapV2Router.WETH());

        /// intializes the router and pair values
        uniswapV2Router = _uniswapV2Router;
        uniswapV2Pair = _uniswapV2Pair;

        /// initializes the fees values for buy / sell
        buyFee.ethReward = 2;
        buyFee.marketing = 28;

        sellFee.ethReward = 2;
        sellFee.marketing = 28;

        // exclude from receiving dividends
        dividendTracker.excludeFromDividends(address(dividendTracker));
        dividendTracker.excludeFromDividends(uniswapV2Pair);
        dividendTracker.excludeFromDividends(address(this));
        dividendTracker.excludeFromDividends(owner());
        dividendTracker.excludeFromDividends(deadWallet);
        dividendTracker.excludeFromDividends(address(_uniswapV2Router));

        // exclude from paying fees or having max transaction amount
        _isExcludedFromFees[owner()] = true;
        _isExcludedFromFees[address(this)] = true;
        /// mint the max supply to owner address upon deployment
        _mint(owner(), 5e8 * 1e18);
    }

    receive() external payable {}

    /// @dev set marketing wallet
    /// @param wallet: new marketing wallet
    function setMarketingWallet(address wallet) external onlyOwner {
        address oldWallet = marketingWallet;
        marketingWallet = wallet;
        emit MarketingWalletUpdated(wallet, oldWallet);
    }

    /// @dev claim eth rewards
    /// @notice users have to wait as per claimTime b/w two consequitve claims
    function claimEthReward() external {
        bool claiming = true;
        (, , , uint256 claimable, , , uint256 nextClaimTime, ) = dividendTracker
            .getAccount(msg.sender);
        if (claimable == 0) {
            revert NoRewardsAvailableYet();
        }
        if (block.timestamp < nextClaimTime) {
            revert TryAfterNextClaimTime();
        }
        dividendTracker.processAccount(payable(msg.sender), false);
        claiming = false;
    }

    /// @dev update duration b/w two consequtive claims
    /// @param claimWait: time in seconds (must be within 3600 and 86400)
    function updateClaimWait(uint256 claimWait) external onlyOwner {
        dividendTracker.updateClaimWait(claimWait);
    }

    /// @notice returns how many eth has been contributed to eth rewards so far
    function getTotalDividendsDistributed() external view returns (uint256) {
        return dividendTracker.totalDividendsDistributed();
    }

    /// @dev set fees for buy
    /// max fees can be 30% combined for reward and marketing buy tax
    function setBuyFees(uint256 reward, uint256 marketing) external onlyOwner {
        if (reward + marketing > 30) {
            revert MAX_FEE_LIMIT_EXCEEDS();
        }
        buyFee.ethReward = reward;
        buyFee.marketing = marketing;
        emit BuyFeesUpdated(reward, marketing);
    }

    /// @dev set sell fees
    /// max fees can be 30% combined for reward and marketing sell tax
    function setSellFees(uint256 reward, uint256 marketing) external onlyOwner {
        if (reward + marketing > 30) {
            revert MAX_FEE_LIMIT_EXCEEDS();
        }
        sellFee.ethReward = reward;
        sellFee.marketing = marketing;
        emit SellFeesUpdated(reward, marketing);
    }

    /// @notice return user info, how much he can claim
    /// total rewards alloted to him in lifetime(including unclaimed),
    /// last claim time,
    /// next claim time etc
    function getUserDividendsInfo(address account)
        external
        view
        returns (
            uint256 claimable,
            uint256 totalEthEarned,
            uint256 lastClaimTime,
            uint256 nextClaimTime
        )
    {
        (
            ,
            ,
            ,
            claimable,
            totalEthEarned,
            lastClaimTime,
            nextClaimTime,

        ) = dividendTracker.getAccount(account);
    }

    /// @notice return number of eligible reward holders
    function getNumberOfRewardHolders() external view returns (uint256) {
        return dividendTracker.getNumberOfTokenHolders();
    }

    /// @notice manage the transfer / fees of token
    /// override required by solidity
    function _update(
        address from,
        address to,
        uint256 amount
    ) internal override {
        if (amount == 0) {
            super._update(from, to, 0);
            return;
        }

        uint256 contractTokenBalance = balanceOf(address(this));

        bool canSwap = contractTokenBalance >= swapTokensAtAmount;

        if (
            canSwap &&
            !swapping &&
            from != uniswapV2Pair &&
            from != owner() &&
            to != owner()
        ) {
            swapping = true;

            swapAndLiquify(contractTokenBalance);

            swapping = false;
        }

        bool takeFee = !swapping;

        // if any account belongs to _isExcludedFromFee account then remove the fee
        // when liquidity is added for first 10 minutes tax is 30% on buy/sell
        // , for subsequent 10 minutes it's 15% on buy/sell
        // afterwards, it's 3% on buy/sell
        if (_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
            takeFee = false;
        }

        if (takeFee) {
            uint256 fees = 0;
            
            /// if it's a buy
            if (from == uniswapV2Pair) {
                fees = (amount * (buyFee.marketing + buyFee.ethReward)) / 100;
            }
            /// if it's a sell
            if (to == uniswapV2Pair) {
                fees = (amount * (sellFee.marketing + sellFee.ethReward)) / 100;
            }

            amount = amount - fees;
            if (fees > 0) {
                super._update(from, address(this), fees);
            }
        }

        super._update(from, to, amount);

        try
            dividendTracker.setBalance(payable(from), balanceOf(from))
        {} catch {}
        try dividendTracker.setBalance(payable(to), balanceOf(to)) {} catch {}
    }

    /// @notice swap the input tokens for eth and send to
    /// marketing wallet as well as to dividend tracker
    function swapAndLiquify(uint256 tokens) private {
        uint256 initialBalance = address(this).balance;

        // swap tokens for ETH
        swapTokensForEth(tokens);

        // how much ETH did we just swap into?
        uint256 newBalance = address(this).balance - initialBalance;
        uint256 totalFees = buyFee.marketing +
            buyFee.ethReward +
            sellFee.marketing +
            sellFee.ethReward;
        if (totalFees > 0) {
            uint256 marketingPart = (newBalance *
                (buyFee.marketing + sellFee.marketing)) / totalFees;
            (bool sent, ) = payable(address(dividendTracker)).call{
                value: newBalance - marketingPart
            }("");
            (bool sent2, ) = payable(marketingWallet).call{
                value: address(this).balance
            }("");
            if (sent || sent2) {
                emit SwapAndLiquify(
                    tokens,
                    marketingPart,
                    newBalance - marketingPart
                );
            }
        } else {
             bool s;
            (s,) = payable(address(marketingWallet)).call{
                value: address(this).balance
            }("");
           
        }
    }

    /// @notice swap the tokens for eth
    function swapTokensForEth(uint256 tokenAmount) private {
        // generate the uniswap pair path of token -> weth
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();
        uint256 out = uniswapV2Router.getAmountsOut(tokenAmount, path)[1];
        if (allowance(address(this), address(uniswapV2Router)) < tokenAmount) {
            _approve(
                address(this),
                address(uniswapV2Router),
                type(uint256).max
            );
        }

        // make the swap
        uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            (out * (100 - 20)) / 100, // 20% slippage
            path,
            address(this),
            block.timestamp + 360
        );
    }
}

//// Spyral dividend tracker, manage eth rewards
////{ see: DividendPayingToken }
contract SpyralDividendTracker is DividendPayingToken {
    using SafeMath for uint256;
    using SafeMathInt for int256;
    using IterableMapping for IterableMapping.Map;

    error TimeLimitMustBeBetween1to24Hours();

    IterableMapping.Map private tokenHoldersMap;
    uint256 public lastProcessedIndex;

    mapping(address => bool) public excludedFromDividends;

    mapping(address => uint256) public lastClaimTimes;

    uint256 public claimWait;
    uint256 public immutable minimumTokenBalanceForDividends;

    event ExcludeFromDividends(address indexed account);
    event ClaimWaitUpdated(uint256 indexed newValue, uint256 indexed oldValue);

    event Claim(
        address indexed account,
        uint256 amount,
        bool indexed automatic
    );

    constructor() {
        claimWait = 12 hours; // cooldown b/w two consequtive claims for user
        minimumTokenBalanceForDividends = 100 * (10**18); //must hold 100+ tokens
    }

    function withdrawDividend() public pure override {
        require(false);
    }

    function excludeFromDividends(address account) external onlyOwner {
        require(!excludedFromDividends[account]);
        excludedFromDividends[account] = true;
        _setBalance(account, 0);
        tokenHoldersMap.remove(account);

        emit ExcludeFromDividends(account);
    }

    function updateClaimWait(uint256 newClaimWait) external onlyOwner {
        if (newClaimWait < 3600 || newClaimWait > 86400) {
            revert TimeLimitMustBeBetween1to24Hours();
        }

        emit ClaimWaitUpdated(newClaimWait, claimWait);
        claimWait = newClaimWait;
    }

    function getLastProcessedIndex() external view returns (uint256) {
        return lastProcessedIndex;
    }

    function getNumberOfTokenHolders() external view returns (uint256) {
        return tokenHoldersMap.keys.length;
    }

    function getAccount(address _account)
        public
        view
        returns (
            address account,
            int256 index,
            int256 iterationsUntilProcessed,
            uint256 withdrawableDividends,
            uint256 totalDividends,
            uint256 lastClaimTime,
            uint256 nextClaimTime,
            uint256 secondsUntilAutoClaimAvailable
        )
    {
        account = _account;

        index = tokenHoldersMap.getIndexOfKey(account);

        iterationsUntilProcessed = -1;

        if (index >= 0) {
            if (uint256(index) > lastProcessedIndex) {
                iterationsUntilProcessed = index.sub(
                    int256(lastProcessedIndex)
                );
            } else {
                uint256 processesUntilEndOfArray = tokenHoldersMap.keys.length >
                    lastProcessedIndex
                    ? tokenHoldersMap.keys.length.sub(lastProcessedIndex)
                    : 0;

                iterationsUntilProcessed = index.add(
                    int256(processesUntilEndOfArray)
                );
            }
        }

        withdrawableDividends = withdrawableDividendOf(account);
        totalDividends = accumulativeDividendOf(account);

        lastClaimTime = lastClaimTimes[account];

        nextClaimTime = lastClaimTime > 0 ? lastClaimTime.add(claimWait) : 0;

        secondsUntilAutoClaimAvailable = nextClaimTime > block.timestamp
            ? nextClaimTime.sub(block.timestamp)
            : 0;
    }

    function getAccountAtIndex(uint256 index)
        public
        view
        returns (
            address,
            int256,
            int256,
            uint256,
            uint256,
            uint256,
            uint256,
            uint256
        )
    {
        if (index >= tokenHoldersMap.size()) {
            return (
                0x0000000000000000000000000000000000000000,
                -1,
                -1,
                0,
                0,
                0,
                0,
                0
            );
        }

        address account = tokenHoldersMap.getKeyAtIndex(index);

        return getAccount(account);
    }

    function setBalance(address payable account, uint256 newBalance)
        external
        onlyOwner
    {
        if (excludedFromDividends[account]) {
            return;
        }

        if (newBalance >= minimumTokenBalanceForDividends) {
            _setBalance(account, newBalance);
            tokenHoldersMap.set(account, newBalance);
        } else {
            _setBalance(account, 0);
            tokenHoldersMap.remove(account);
        }
    }

    function processAccount(address payable account, bool automatic)
        public
        onlyOwner
        returns (bool)
    {
        uint256 amount = _withdrawDividendOfUser(account);

        if (amount > 0) {
            lastClaimTimes[account] = block.timestamp;
            emit Claim(account, amount, automatic);
            return true;
        }

        return false;
    }
}

{
  "compilationTarget": {
    "Spyral.sol": "Spyral"
  },
  "evmVersion": "shanghai",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}