/**
    This special memecoin, known as the Memeory Coin,
    is designed to celebrate the first time a Monet’s Paysage painting
    was ever auctioned on-chain, successfully acquired by Oak Grove Ventures.

                                                rNTTTTTNNNNT8r                                        
                                            8NNNTNNTTT111TNNTNTTk                                     
                                        x1NNNNNNT81NTTTTT111TNTTTTNN8r                                  
                                    dNNNNNNTT111NT81111TTTTTNTTTTTNNTd                                
                                    TNNNGGGNGT1TNGGNTTTTNTTTTTTT1NTTTTTTx                              
                                1NNNNNNNNGGNNNGGGGGGGGNNGGNNNNNNNTTTTTT1dx                           
                                8NNGNNGNNGGNNNGGGNGNNNNGGNNGNNGNGNNNNNTNNTTT1d                         
                                8TNGNNNNNNGNNNNNNTT1188881111111TTNNNGNGNNNNNNT1k                       
                                kTTNTNTTNNNNTT1dxxxxrkr             kd1NNNGNGGNNTN8                     
                                kTTTNNNNNNTT1r   xxrrx               k1NNNNNNGNNTd                     
                                dTNNNNNNT1dx   xkddddkr        x     8TNNNNNNNd                       
                                11NNTTT18kxxxxrrxxxxrrxkkr     r    d1TT111k                         
                                r8T181TTT8kx    xk81Tdr8dkk   kT8 x x8rr                              
                                    rxkdT1dkx  xxkrrrrrkddddr                                          
                                        k1T1krx xrxxxrrrkddkdk                                          
                                    k xrk111krxxxx xxxrrkkrkkr                                          
                                    xr1NTddrxxxxxxxrxxxrxr          x                                
                                        xTNNT1dkrrxx xxxxrrr8dx       rk                                
                                        x1NNNT18krrrrxrrrk8TT18d8r    rkx                               
                                        dTNNNN118dkrkk81TTNNT88T1ddx  kkr                               
                                    r8TNNNNTT1188811TTNNNT1111888ddkkrr                              
                                        x8TTNNNNNGNNTTNNTTTTNTTTTNNTT1kkk                               
                                        rd1NNNGNNNNTNNNNNTTT111NNNNNN11dx                               
                                kdkkdrr81TNNNNNNNNNNNNNTNTTTTNNTTTT18kx                              
                                xrdrxkkx k888TNNNNNNTTNNNNNTTTTTTTT111drr                              
                                xkk  xdkx   xd1TNNNNNNNTTTTTNNNTNNT118dddrk                             
                            kkkdkx   kdx   r811NNNNNTTTTTTNTNTNTT1T188ddrxx                           
                        kd1dkkddk     dr   xk88TNNNNTTTTNNNNNNTTT18888drrr                           
                        r88188ddd81kr     rkr  xkd1TTNTTTTT1TT111N1188ddr8rx                            
                    k81188dddd111k        kdrrr881TNT1d888dd888xd888dkkkr x                          
                rd8dd88888Td8881118d         xddrd8811888dk   k8rd88drrxx   r                         
            rdd88d888888T8ddd81118dk             kd811dr    xd8d8ddkrkkrx                            
            xdddd8d8888811TT8d8888888dr         dT1TTNNTT118kxxxdkkrxrd8rdkx                           
        kdkkdd818d8888811TT18888d888dkx    81NNTNNNNNNTTd1Td  xrxx  rkdkddrx x                        
        xdddddkd88d818111111T11888dd88dddkrTNNGGGGNGGNNNNNN1dk       xxkdkrkxxrxx   xxr                 
    k88kdkk811888d81181TTTTT1111T1111818d8TNGGGGGGNT11181T18k   xxrxxrdrrxxrrr     xrrrxxx           
    d88kkrd11888881T11TTTTTNT11TTTTT88118krk1NGGGT888118d81TTT88dkrrkkdkkrxxrx      kkk  xxx x    x  
    xd8ddkkd88111811T11TTTTTTNNNTNNT11T1118ddTGNGT1d1T1TT8dk8T88dddkkrkddkrx  kr     rkkkx  xx        
    dddddkdddd881111181TT11TTNNNNNT1TTTT1T1d8TGGNNT1TTTT18kd888krrrrrkkkdkrkxxrkr    rkkkkx           
    kd8dd8kdkkkdd81drd11TTTTTNTNNTTTT11T1T1d8TGGGGGNTTTNTT1T1dddrr r8dd88kdrxrxx krx   rddd88kx  x     
    d888ddkkrkkkk8T1rk11TTTTNTTNNNNTT111TTT8TGGGGGGGNTTTTT1T1dkrkr  k888ddkkxxx  xkx     dd888x        
    88dkkkkr   xkddTdd88ddd81TT1TTTTT1T1T81NGGGGGGGGGGNT1TT18rkrxxrkkddkdxx  xrddr        xk8dr        
    d8krrkkr    xd81dddkkkk1111TTTTTT1181dTGNGGGGGGGGGNNTTT88drrxxrddddkk xrxxrkkdr        rdd         
    r   xkrx   xd81kddkdddd81188TTT111188NNNNNNNNNNNGNTT1188kx rxrddddkrr xr  x dr        k88dr       
        rxx    k81ddkkkkdd888881TTT1T181NNNNNNNNNNNNNT118kkx   rrddkkdrrrrxr             k11k        
            xx    k1188kkdddkddd88TTNTTT11NGGGGGGNNGNNNNT118kdx   kd888ddkrrx                           
                k8T118kkdddddd88TNNNTTTNGGGGGGGGGGGGGGNT11dkkx  k11188ddx     x                       
                k1k818dddkkkd88TTTTNNNGGGGGGGGGGGGGGGNTT11drx  r1111888r  x                   x      
    rkdr          r18ddkkkdkkkd8811111TGGGGGGGGGNGGGGGGGNT1dkkx xd111188r                              
            xrkxx8xrkrr xrkkkd8181881TGGGGGGGGGNNGGGGGGNTT1dkk rdTT111d         
*/

// Sources flattened with hardhat v2.22.15 https://hardhat.org

// SPDX-License-Identifier: MIT AND UNLICENSED

// File @openzeppelin/contracts/utils/Context.sol@v4.9.6

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}


// File @openzeppelin/contracts/access/Ownable.sol@v4.9.6

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


// File @openzeppelin/contracts/token/ERC20/IERC20.sol@v4.9.6

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}


// File @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol@v4.9.6

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}


// File @openzeppelin/contracts/token/ERC20/ERC20.sol@v4.9.6

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;



/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}


// File contracts/interfaces/IUniswapV2Factory.sol

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(
        address indexed token0,
        address indexed token1,
        address pair,
        uint256
    );

    function feeTo() external view returns (address);

    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB)
    external
    view
    returns (address pair);

    function allPairs(uint256) external view returns (address pair);

    function allPairsLength() external view returns (uint256);

    function createPair(address tokenA, address tokenB)
    external
    returns (address pair);

    function setFeeTo(address) external;

    function setFeeToSetter(address) external;
}


// File contracts/interfaces/IUniswapV2Router01.sol

pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
    function factory() external pure returns (address);

    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint256 amountADesired,
        uint256 amountBDesired,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    )
    external
    returns (
        uint256 amountA,
        uint256 amountB,
        uint256 liquidity
    );

    function addLiquidityETH(
        address token,
        uint256 amountTokenDesired,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    )
    external
    payable
    returns (
        uint256 amountToken,
        uint256 amountETH,
        uint256 liquidity
    );

    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountA, uint256 amountB);

    function removeLiquidityETH(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountToken, uint256 amountETH);

    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountA, uint256 amountB);

    function removeLiquidityETHWithPermit(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountToken, uint256 amountETH);

    function swapExactTokensForTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapTokensForExactTokens(
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapExactETHForTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable returns (uint256[] memory amounts);

    function swapTokensForExactETH(
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapExactTokensForETH(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapETHForExactTokens(
        uint256 amountOut,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable returns (uint256[] memory amounts);

    function quote(
        uint256 amountA,
        uint256 reserveA,
        uint256 reserveB
    ) external pure returns (uint256 amountB);

    function getAmountOut(
        uint256 amountIn,
        uint256 reserveIn,
        uint256 reserveOut
    ) external pure returns (uint256 amountOut);

    function getAmountIn(
        uint256 amountOut,
        uint256 reserveIn,
        uint256 reserveOut
    ) external pure returns (uint256 amountIn);

    function getAmountsOut(uint256 amountIn, address[] calldata path)
    external
    view
    returns (uint256[] memory amounts);

    function getAmountsIn(uint256 amountOut, address[] calldata path)
    external
    view
    returns (uint256[] memory amounts);
}


// File contracts/ClaudeMonetMemoryCoin.sol

// Original license: SPDX_License_Identifier: UNLICENSED
pragma solidity =0.8.17;




contract ClaudeMonetMemoryCoin is Ownable, ERC20 {
    
    address public immutable auctionAddress;
    IUniswapV2Router01 immutable public uniswapV2Router;
    address public immutable uniswapV2PairETH;
    address public immutable uniswapV2PairAUCTION;

    uint256 public firstLPTime;
    uint256 public durationLimitBuy;
    uint256 public amountLimitETHInDuration;
    uint256 public amountLimitAUCTIONInDuration;

    mapping(address => bool) public inWhitelist;

    event WhitelistSetup(address whitelist, bool enable);

    constructor(address _auctionAddress, address _uniswapV2Router) ERC20("Claude Monet Memeory Coin", "MONET") {
        require(_auctionAddress != address(0), "invalid address");
        require(_uniswapV2Router != address(0), "invalid address");

        auctionAddress = _auctionAddress;
        uniswapV2Router = IUniswapV2Router01(_uniswapV2Router);
        uniswapV2PairETH = IUniswapV2Factory(uniswapV2Router.factory()).createPair(
            address(this),
            uniswapV2Router.WETH()
        );
        uniswapV2PairAUCTION = IUniswapV2Factory(uniswapV2Router.factory()).createPair(
            address(this),
            auctionAddress
        );

        durationLimitBuy = 10 minutes;
        amountLimitETHInDuration = 0.1 ether;
        amountLimitAUCTIONInDuration = 100 ether;

        enableWhitelist(msg.sender);
        _mint(msg.sender, 184000000 ether);
    }

    function enableWhitelist(address _whitelist) public onlyOwner {
        require(_whitelist != uniswapV2PairETH, "invalid address");

        inWhitelist[_whitelist] = true;
        emit WhitelistSetup(_whitelist, true);
    }
    function disableWhitelist(address _whitelist) public onlyOwner {
        inWhitelist[_whitelist] = false;
        emit WhitelistSetup(_whitelist, false);
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
        if (firstLPTime == 0) {
            require(inWhitelist[from] || inWhitelist[to], "only whitelist");
            if (to == uniswapV2PairETH) {
                firstLPTime = block.timestamp;
            }
        } else {
            if (block.timestamp - durationLimitBuy < firstLPTime) {
                if (from == uniswapV2PairETH) {
                    address[] memory path = new address[](2);
                    path[0] = uniswapV2Router.WETH();
                    path[1] = address(this);
                    uint256 amountWETH = uniswapV2Router.getAmountsIn(amount, path)[0];
                    require(amountWETH <= amountLimitETHInDuration, "overflow");
                }

                if (from == uniswapV2PairAUCTION) {
                    address[] memory path = new address[](2);
                    path[0] = auctionAddress;
                    path[1] = address(this);
                    uint256 amountAUCTION = uniswapV2Router.getAmountsIn(amount, path)[0];
                    require(amountAUCTION <= amountLimitAUCTIONInDuration, "overflow");
                }
            }
        }
    }

}

{
  "compilationTarget": {
    "ClaudeMonetMemoryCoin.sol": "ClaudeMonetMemoryCoin"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}