Yubba

// Sources flattened with hardhat v2.6.8 https://hardhat.org

// File @openzeppelin/contracts/utils/Context.sol@v4.3.2

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}


// File @openzeppelin/contracts/access/Ownable.sol@v4.3.2


pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


// File @openzeppelin/contracts/utils/introspection/IERC165.sol@v4.3.2

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}


// File @openzeppelin/contracts/token/ERC1155/IERC1155.sol@v4.3.2


pragma solidity ^0.8.0;

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}


// File @openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol@v4.3.2


pragma solidity ^0.8.0;

/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
        @dev Handles the receipt of a single ERC1155 token type. This function is
        called at the end of a `safeTransferFrom` after the balance has been updated.
        To accept the transfer, this must return
        `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
        (i.e. 0xf23a6e61, or its own function selector).
        @param operator The address which initiated the transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param id The ID of the token being transferred
        @param value The amount of tokens being transferred
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
    */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
        @dev Handles the receipt of a multiple ERC1155 token types. This function
        is called at the end of a `safeBatchTransferFrom` after the balances have
        been updated. To accept the transfer(s), this must return
        `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
        (i.e. 0xbc197c81, or its own function selector).
        @param operator The address which initiated the batch transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param ids An array containing ids of each token being transferred (order and length must match values array)
        @param values An array containing amounts of each token being transferred (order and length must match ids array)
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
    */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}


// File @openzeppelin/contracts/token/ERC1155/extensions/IERC1155MetadataURI.sol@v4.3.2

pragma solidity ^0.8.0;

/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155MetadataURI is IERC1155 {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\{id\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}


// File @openzeppelin/contracts/utils/Address.sol@v4.3.2


pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


// File @openzeppelin/contracts/utils/introspection/ERC165.sol@v4.3.2



pragma solidity ^0.8.0;

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}


// File @openzeppelin/contracts/token/ERC1155/ERC1155.sol@v4.3.2

pragma solidity ^0.8.0;






/**
 * @dev Implementation of the basic standard multi-token.
 * See https://eips.ethereum.org/EIPS/eip-1155
 * Originally based on code by Enjin: https://github.com/enjin/erc-1155
 *
 * _Available since v3.1._
 */
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
    using Address for address;

    // Mapping from token ID to account balances
    mapping(uint256 => mapping(address => uint256)) private _balances;

    // Mapping from account to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
    string private _uri;

    /**
     * @dev See {_setURI}.
     */
    constructor(string memory uri_) {
        _setURI(uri_);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC1155).interfaceId ||
            interfaceId == type(IERC1155MetadataURI).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\{id\}` substring with the
     * actual token type ID.
     */
    function uri(uint256) public view virtual override returns (string memory) {
        return _uri;
    }

    /**
     * @dev See {IERC1155-balanceOf}.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
        require(account != address(0), "ERC1155: balance query for the zero address");
        return _balances[id][account];
    }

    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
        public
        view
        virtual
        override
        returns (uint256[] memory)
    {
        require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");

        uint256[] memory batchBalances = new uint256[](accounts.length);

        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts[i], ids[i]);
        }

        return batchBalances;
    }

    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        require(_msgSender() != operator, "ERC1155: setting approval status for self");

        _operatorApprovals[_msgSender()][operator] = approved;
        emit ApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[account][operator];
    }

    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not owner nor approved"
        );
        _safeTransferFrom(from, to, id, amount, data);
    }

    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: transfer caller is not owner nor approved"
        );
        _safeBatchTransferFrom(from, to, ids, amounts, data);
    }

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }
        _balances[id][to] += amount;

        emit TransferSingle(operator, from, to, id, amount);

        _doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
            _balances[id][to] += amount;
        }

        emit TransferBatch(operator, from, to, ids, amounts);

        _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
    }

    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\{id\}` substring in either the
     * URI or any of the amounts in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\{id\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        _uri = newuri;
    }

    /**
     * @dev Creates `amount` tokens of token type `id`, and assigns them to `account`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - If `account` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(
        address account,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(account != address(0), "ERC1155: mint to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, address(0), account, _asSingletonArray(id), _asSingletonArray(amount), data);

        _balances[id][account] += amount;
        emit TransferSingle(operator, address(0), account, id, amount);

        _doSafeTransferAcceptanceCheck(operator, address(0), account, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _mintBatch(
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; i++) {
            _balances[ids[i]][to] += amounts[i];
        }

        emit TransferBatch(operator, address(0), to, ids, amounts);

        _doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
    }

    /**
     * @dev Destroys `amount` tokens of token type `id` from `account`
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens of token type `id`.
     */
    function _burn(
        address account,
        uint256 id,
        uint256 amount
    ) internal virtual {
        require(account != address(0), "ERC1155: burn from the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, account, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");

        uint256 accountBalance = _balances[id][account];
        require(accountBalance >= amount, "ERC1155: burn amount exceeds balance");
        unchecked {
            _balances[id][account] = accountBalance - amount;
        }

        emit TransferSingle(operator, account, address(0), id, amount);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     */
    function _burnBatch(
        address account,
        uint256[] memory ids,
        uint256[] memory amounts
    ) internal virtual {
        require(account != address(0), "ERC1155: burn from the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, account, address(0), ids, amounts, "");

        for (uint256 i = 0; i < ids.length; i++) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 accountBalance = _balances[id][account];
            require(accountBalance >= amount, "ERC1155: burn amount exceeds balance");
            unchecked {
                _balances[id][account] = accountBalance - amount;
            }
        }

        emit TransferBatch(operator, account, address(0), ids, amounts);
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
                if (response != IERC1155Receiver.onERC1155Received.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non ERC1155Receiver implementer");
            }
        }
    }

    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non ERC1155Receiver implementer");
            }
        }
    }

    function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
        uint256[] memory array = new uint256[](1);
        array[0] = element;

        return array;
    }
}


// File contracts/PaymentSplitter.sol


/*****************************************************************************************
ÔûêÔûêÔòùÔûæÔûæÔûæÔûêÔûêÔòùÔûêÔûêÔòùÔûæÔûæÔûæÔûêÔûêÔòùÔûêÔûêÔûêÔûêÔûêÔûêÔòùÔûæÔûêÔûêÔûêÔûêÔûêÔûêÔòùÔûæÔûæÔûêÔûêÔûêÔûêÔûêÔòùÔûæÔÇâÔÇâÔûæÔûêÔûêÔòùÔûæÔûæÔûæÔûæÔûæÔûæÔûæÔûêÔûêÔòùÔûæÔûêÔûêÔûêÔûêÔûêÔòùÔûæÔûêÔûêÔûêÔûêÔûêÔûêÔòùÔûæÔûêÔûêÔòùÔûæÔûæÔûæÔûæÔûæÔûêÔûêÔûêÔûêÔûêÔûêÔòùÔûæ
ÔòÜÔûêÔûêÔòùÔûæÔûêÔûêÔòöÔòØÔûêÔûêÔòæÔûæÔûæÔûæÔûêÔûêÔòæÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔÇâÔÇâÔûæÔûêÔûêÔòæÔûæÔûæÔûêÔûêÔòùÔûæÔûæÔûêÔûêÔòæÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔûêÔûêÔòæÔûæÔûæÔûæÔûæÔûæÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòù
ÔûæÔòÜÔûêÔûêÔûêÔûêÔòöÔòØÔûæÔûêÔûêÔòæÔûæÔûæÔûæÔûêÔûêÔòæÔûêÔûêÔûêÔûêÔûêÔûêÔòªÔòØÔûêÔûêÔûêÔûêÔûêÔûêÔòªÔòØÔûêÔûêÔûêÔûêÔûêÔûêÔûêÔòæÔÇâÔÇâÔûæÔòÜÔûêÔûêÔòùÔûêÔûêÔûêÔûêÔòùÔûêÔûêÔòöÔòØÔûêÔûêÔòæÔûæÔûæÔûêÔûêÔòæÔûêÔûêÔûêÔûêÔûêÔûêÔòöÔòØÔûêÔûêÔòæÔûæÔûæÔûæÔûæÔûæÔûêÔûêÔòæÔûæÔûæÔûêÔûêÔòæ
ÔûæÔûæÔòÜÔûêÔûêÔòöÔòØÔûæÔûæÔûêÔûêÔòæÔûæÔûæÔûæÔûêÔûêÔòæÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòæÔÇâÔÇâÔûæÔûæÔûêÔûêÔûêÔûêÔòöÔòÉÔûêÔûêÔûêÔûêÔòæÔûæÔûêÔûêÔòæÔûæÔûæÔûêÔûêÔòæÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔûêÔûêÔòæÔûæÔûæÔûæÔûæÔûæÔûêÔûêÔòæÔûæÔûæÔûêÔûêÔòæ
ÔûæÔûæÔûæÔûêÔûêÔòæÔûæÔûæÔûæÔòÜÔûêÔûêÔûêÔûêÔûêÔûêÔòöÔòØÔûêÔûêÔûêÔûêÔûêÔûêÔòªÔòØÔûêÔûêÔûêÔûêÔûêÔûêÔòªÔòØÔûêÔûêÔòæÔûæÔûæÔûêÔûêÔòæÔÇâÔÇâÔûæÔûæÔòÜÔûêÔûêÔòöÔòØÔûæÔòÜÔûêÔûêÔòöÔòØÔûæÔòÜÔûêÔûêÔûêÔûêÔûêÔòöÔòØÔûêÔûêÔòæÔûæÔûæÔûêÔûêÔòæÔûêÔûêÔûêÔûêÔûêÔûêÔûêÔòùÔûêÔûêÔûêÔûêÔûêÔûêÔòöÔòØ
ÔûæÔûæÔûæÔòÜÔòÉÔòØÔûæÔûæÔûæÔûæÔòÜÔòÉÔòÉÔòÉÔòÉÔòÉÔòØÔûæÔòÜÔòÉÔòÉÔòÉÔòÉÔòÉÔòØÔûæÔòÜÔòÉÔòÉÔòÉÔòÉÔòÉÔòØÔûæÔòÜÔòÉÔòØÔûæÔûæÔòÜÔòÉÔòØÔÇâÔÇâÔûæÔûæÔûæÔòÜÔòÉÔòØÔûæÔûæÔûæÔòÜÔòÉÔòØÔûæÔûæÔûæÔòÜÔòÉÔòÉÔòÉÔòÉÔòØÔûæÔòÜÔòÉÔòØÔûæÔûæÔòÜÔòÉÔòØÔòÜÔòÉÔòÉÔòÉÔòÉÔòÉÔòÉÔòØÔòÜÔòÉÔòÉÔòÉÔòÉÔòÉÔòØÔûæ
*********************Development done by Yubbabian Tech Wizard****************************
******************************************************************************************/
pragma solidity ^0.8.0;
    /********************Begin of Payment Splitter *********************************/
    /**
     * @dev this section contains the methods used
     * to split payment between all collaborators of this project
     */
contract PaymentSplitter is Ownable{
    event PayeeAdded(address account, uint256 shares);
    event PaymentReleased(address to, uint256 amount);
    event PaymentReceived(address from, uint256 amount);

    uint256 private _totalShares;
    uint256 private _totalReleased;

    mapping(address => uint256) private _shares;
    mapping(address => uint256) private _released;
    address[] private _payees;
    bool private initialized = false;

    /**
     * @dev The Ether received will be logged with {PaymentReceived} events. Note that these events are not fully
     * reliable: it's possible for a contract to receive Ether without triggering this function. This only affects the
     * reliability of the events, and not the actual splitting of Ether.
     *
     * To learn more about this see the Solidity documentation for
     * https://solidity.readthedocs.io/en/latest/contracts.html#fallback-function[fallback
     * functions].
     */
    receive() external payable virtual {
        emit PaymentReceived(msg.sender, msg.value);
    }

    /**
     * @dev Getter for the total shares held by payees.
     */
    function totalShares() public view returns (uint256) {
        return _totalShares;
    }

    /**
     * @dev Getter for the total amount of Ether already released.
     */
    function totalReleased() public view returns (uint256) {
        return _totalReleased;
    }

    /**
     * @dev Getter for the amount of shares held by an account.
     */
    function shares(address account) public view returns (uint256) {
        return _shares[account];
    }

    /**
     * @dev Getter for the amount of Ether already released to a payee.
     */
    function released(address account) public view returns (uint256) {
        return _released[account];
    }

    /**
     * @dev Getter for the address of the payee number `index`.
     */
    function payee(uint256 index) public view returns (address) {
        return _payees[index];
    }

    /**
     * @dev Triggers a transfer to `account` of the amount of Ether they are owed, according to their percentage of the
     * total shares and their previous withdrawals.
     */
    function release(address payable account) public virtual {
        require(_shares[account] > 0, "PaymentSplitter: account has no shares");
        require(msg.sender == account,"Not authorized");
        uint256 totalReceived = address(this).balance + _totalReleased;
        uint256 payment = (totalReceived * _shares[account]) /
            _totalShares -
            _released[account];

        require(payment != 0, "Account is not due payment");

        _released[account] = _released[account] + payment;
        _totalReleased = _totalReleased + payment;

        Address.sendValue(account, payment);
        // payable(account).send(payment);
        emit PaymentReleased(account, payment);
    }

    /**
     * @dev Add a new payee to the contract.
     * @param account The address of the payee to add.
     * @param shares_ The number of shares owned by the payee.
     */
    function _addPayee(address account, uint256 shares_) internal {
        require(
            account != address(0),
            "Account is the zero address"
        );
        require(shares_ > 0, "PaymentSplitter: shares are 0");
        require(
            _shares[account] == 0,
            "Account already has shares"
        );

        _payees.push(account);
        _shares[account] = shares_;
        _totalShares = _totalShares + shares_;
        emit PayeeAdded(account, shares_);
    }

    /**
     * @dev Return all payees
     */
    function getPayees() public view returns (address[] memory) {
        return _payees;
    }
    
    /**
     * @dev Set up all holders shares
     * @param payees wallets of holders.
     * @param shares_ shares of each holder.
     */
    function initializePaymentSplitter(
        address[] memory payees,
        uint256[] memory shares_
    ) public onlyOwner {
        require(!initialized, "Payment Split Already Initialized!");
        require(
            payees.length == shares_.length,
            "Payees and shares length mismatch"
        );
        require(payees.length > 0, "PaymentSplitter: no payees");

        for (uint256 i = 0; i < payees.length; i++) {
            _addPayee(payees[i], shares_[i]);
        }
        initialized = true;
    }
}
    /********************End of Payment Splitter *********************************/


// File contracts/YubbaWorld.sol


/*****************************************************************************************
ÔûêÔûêÔòùÔûæÔûæÔûæÔûêÔûêÔòùÔûêÔûêÔòùÔûæÔûæÔûæÔûêÔûêÔòùÔûêÔûêÔûêÔûêÔûêÔûêÔòùÔûæÔûêÔûêÔûêÔûêÔûêÔûêÔòùÔûæÔûæÔûêÔûêÔûêÔûêÔûêÔòùÔûæÔÇâÔÇâÔûæÔûêÔûêÔòùÔûæÔûæÔûæÔûæÔûæÔûæÔûæÔûêÔûêÔòùÔûæÔûêÔûêÔûêÔûêÔûêÔòùÔûæÔûêÔûêÔûêÔûêÔûêÔûêÔòùÔûæÔûêÔûêÔòùÔûæÔûæÔûæÔûæÔûæÔûêÔûêÔûêÔûêÔûêÔûêÔòùÔûæ
ÔòÜÔûêÔûêÔòùÔûæÔûêÔûêÔòöÔòØÔûêÔûêÔòæÔûæÔûæÔûæÔûêÔûêÔòæÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔÇâÔÇâÔûæÔûêÔûêÔòæÔûæÔûæÔûêÔûêÔòùÔûæÔûæÔûêÔûêÔòæÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔûêÔûêÔòæÔûæÔûæÔûæÔûæÔûæÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòù
ÔûæÔòÜÔûêÔûêÔûêÔûêÔòöÔòØÔûæÔûêÔûêÔòæÔûæÔûæÔûæÔûêÔûêÔòæÔûêÔûêÔûêÔûêÔûêÔûêÔòªÔòØÔûêÔûêÔûêÔûêÔûêÔûêÔòªÔòØÔûêÔûêÔûêÔûêÔûêÔûêÔûêÔòæÔÇâÔÇâÔûæÔòÜÔûêÔûêÔòùÔûêÔûêÔûêÔûêÔòùÔûêÔûêÔòöÔòØÔûêÔûêÔòæÔûæÔûæÔûêÔûêÔòæÔûêÔûêÔûêÔûêÔûêÔûêÔòöÔòØÔûêÔûêÔòæÔûæÔûæÔûæÔûæÔûæÔûêÔûêÔòæÔûæÔûæÔûêÔûêÔòæ
ÔûæÔûæÔòÜÔûêÔûêÔòöÔòØÔûæÔûæÔûêÔûêÔòæÔûæÔûæÔûæÔûêÔûêÔòæÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòæÔÇâÔÇâÔûæÔûæÔûêÔûêÔûêÔûêÔòöÔòÉÔûêÔûêÔûêÔûêÔòæÔûæÔûêÔûêÔòæÔûæÔûæÔûêÔûêÔòæÔûêÔûêÔòöÔòÉÔòÉÔûêÔûêÔòùÔûêÔûêÔòæÔûæÔûæÔûæÔûæÔûæÔûêÔûêÔòæÔûæÔûæÔûêÔûêÔòæ
ÔûæÔûæÔûæÔûêÔûêÔòæÔûæÔûæÔûæÔòÜÔûêÔûêÔûêÔûêÔûêÔûêÔòöÔòØÔûêÔûêÔûêÔûêÔûêÔûêÔòªÔòØÔûêÔûêÔûêÔûêÔûêÔûêÔòªÔòØÔûêÔûêÔòæÔûæÔûæÔûêÔûêÔòæÔÇâÔÇâÔûæÔûæÔòÜÔûêÔûêÔòöÔòØÔûæÔòÜÔûêÔûêÔòöÔòØÔûæÔòÜÔûêÔûêÔûêÔûêÔûêÔòöÔòØÔûêÔûêÔòæÔûæÔûæÔûêÔûêÔòæÔûêÔûêÔûêÔûêÔûêÔûêÔûêÔòùÔûêÔûêÔûêÔûêÔûêÔûêÔòöÔòØ
ÔûæÔûæÔûæÔòÜÔòÉÔòØÔûæÔûæÔûæÔûæÔòÜÔòÉÔòÉÔòÉÔòÉÔòÉÔòØÔûæÔòÜÔòÉÔòÉÔòÉÔòÉÔòÉÔòØÔûæÔòÜÔòÉÔòÉÔòÉÔòÉÔòÉÔòØÔûæÔòÜÔòÉÔòØÔûæÔûæÔòÜÔòÉÔòØÔÇâÔÇâÔûæÔûæÔûæÔòÜÔòÉÔòØÔûæÔûæÔûæÔòÜÔòÉÔòØÔûæÔûæÔûæÔòÜÔòÉÔòÉÔòÉÔòÉÔòØÔûæÔòÜÔòÉÔòØÔûæÔûæÔòÜÔòÉÔòØÔòÜÔòÉÔòÉÔòÉÔòÉÔòÉÔòÉÔòØÔòÜÔòÉÔòÉÔòÉÔòÉÔòÉÔòØÔûæ
*********************Development done by Hiich/Yubbabian Tech Wizard**********************
******************************************************************************************/

pragma solidity ^0.8.0;
/**
 * @dev contract module which defines YubbaWorld NFT Collection
 * and all the interactions it uses
 */
contract YubbaWorld is ERC1155, Ownable, PaymentSplitter {
    //@dev Attributes for NFT configuration
    uint256 internal tokenId;
    uint256 public cost = 0.05 ether;
    uint256 public maxSupply = 10000;
    uint256 public maxMintAmount = 5;
    mapping(address => uint256) public whitelist;
    bool public paused;
    bool public consumables;
    uint256 public constant healthPotion = 99999;
    uint256 public constant GOLD = 99998;

    // @dev inner attributes of the contract

    /**
     * @dev Create an instance of YubbaWorld contract
     */
    constructor(
        string memory _baseURI
    ) ERC1155(_baseURI) {
        tokenId = 0;
    }

    /**
     * @dev Mint edition to a wallet
     * @param _to wallet receiving the edition(s).
     * @param _mintAmount number of editions to mint.
     */
    function mint(address _to, uint256 _mintAmount, uint256 _tokenId) public payable {
        require(!paused, "Sales are paused");
        require(_mintAmount <= maxMintAmount, "Max amount exceeded");
        require(
            tokenId + _mintAmount <= maxSupply,
            "Not enough mintable editions !"
        );
        
        if(whitelist[_to] < _mintAmount)
            require(
                msg.value >= cost * _mintAmount,
                "Insufficient transaction amount."
            );
        else
            whitelist[_to] -= _mintAmount;
        
        if(_tokenId > maxSupply){
            require(consumables == true, "consumables not mintable yet");
            _mint(_to, _tokenId, _mintAmount, "");
        }
        else 
            for (uint256 i = 0; i < _mintAmount; i++) {
                tokenId++;
                _mint(_to, tokenId, 1, "");
            }
    }

    // /**
    //  * @dev Mint edition to a wallet
    //  * @param _to wallet receiving the edition(s).
    //  * @param _mintAmount number of editions to mint.
    //  */
    // function mintConsumables(
    //     address _to,
    //     uint256 _mintAmount,
    //     uint256 _id
    // ) public payable {
    //     require(!consumables, "Sales are paused");
    //     require(_id > tokenId);
    //     require(
    //         msg.value >= cost * _mintAmount,
    //         "Insufficient transaction amount."
    //     );
    //     _mint(_to, _id, _mintAmount, "");
    // }

    /**
     * @dev change cost of NFT
     * @param _newCost new cost of each edition
     */
    function setCost(uint256 _newCost) public onlyOwner {
        cost = _newCost;
    }

    /**
     * @dev restrict max mintable amount of edition at a time
     * @param _newmaxMintAmount new max mintable amount
     */
    function setmaxMintAmount(uint256 _newmaxMintAmount) public onlyOwner {
        maxMintAmount = _newmaxMintAmount;
    }

    /**
     * @dev restrict max mintable amount of edition at a time
     * @param _nexMaxSupply new max supply
     */
    function setmaxSupply(uint256 _nexMaxSupply) public onlyOwner {
        maxSupply = _nexMaxSupply;
    }
    
    /**
     * @dev set uri
     * @param _newURI new URI
     */
    function setURI(string memory _newURI) public onlyOwner {
        _setURI(_newURI);
    }

    /**
     * @dev Disable minting process
     */
    function pause() public onlyOwner {
        paused = !paused;
    }

    /**
     * @dev Disable minting process
     */
    function pauseConsumables() public onlyOwner {
        consumables = !consumables;
    }
    /**
     * @dev Add user to white list
     * @param _user Users wallet to whitelist
     */
    function whitelistUserBatch(
        address[] memory _user,
        uint256[] memory _amount
    ) public onlyOwner {
        require(_user.length == _amount.length);
        for (uint256 i = 0; i < _user.length; i++)
            whitelist[_user[i]] = _amount[i];
    }
    
     /**
     * @dev Destroys `amount` tokens of token type `id` from `from`
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `amount` tokens of token type `id`.
     */
    function burn(
        uint256 id,
        uint256 amount)
        public {
            _burn(msg.sender, id, amount);
        }
}

{
  "compilationTarget": {
    "YubbaWorld.sol": "YubbaWorld"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}