// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)pragmasolidity ^0.8.1;/**
* @dev Collection of functions related to the address type
*/libraryAddress{
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/functionisContract(address account) internalviewreturns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0// for contracts in construction, since the code is only stored at the end// of the constructor execution.return account.code.length>0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/functionsendValue(addresspayable recipient, uint256 amount) internal{
require(address(this).balance>= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/functionfunctionCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target,
bytesmemory data,
uint256 value
) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target,
bytesmemory data,
uint256 value,
stringmemory errorMessage
) internalreturns (bytesmemory) {
require(address(this).balance>= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytesmemory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target, bytesmemory data) internalviewreturns (bytesmemory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalviewreturns (bytesmemory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytesmemory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/functionfunctionDelegateCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/functionfunctionDelegateCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalreturns (bytesmemory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytesmemory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/functionverifyCallResult(bool success,
bytesmemory returndata,
stringmemory errorMessage
) internalpurereturns (bytesmemory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if presentif (returndata.length>0) {
// The easiest way to bubble the revert reason is using memory via assembly/// @solidity memory-safe-assemblyassembly {
let returndata_size :=mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
Contract Source Code
File 2 of 22: Context.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)pragmasolidity ^0.8.0;/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/abstractcontractContext{
function_msgSender() internalviewvirtualreturns (address) {
returnmsg.sender;
}
function_msgData() internalviewvirtualreturns (bytescalldata) {
returnmsg.data;
}
}
Contract Source Code
File 3 of 22: Counters.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)pragmasolidity ^0.8.0;/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/libraryCounters{
structCounter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add// this feature: see https://github.com/ethereum/solidity/issues/4637uint256 _value; // default: 0
}
functioncurrent(Counter storage counter) internalviewreturns (uint256) {
return counter._value;
}
functionincrement(Counter storage counter) internal{
unchecked {
counter._value +=1;
}
}
functiondecrement(Counter storage counter) internal{
uint256 value = counter._value;
require(value >0, "Counter: decrement overflow");
unchecked {
counter._value = value -1;
}
}
functionreset(Counter storage counter) internal{
counter._value =0;
}
}
Contract Source Code
File 4 of 22: ERC1155.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC1155/ERC1155.sol)pragmasolidity ^0.8.0;import"./IERC1155.sol";
import"./IERC1155Receiver.sol";
import"./extensions/IERC1155MetadataURI.sol";
import"../../utils/Address.sol";
import"../../utils/Context.sol";
import"../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/contractERC1155isContext, ERC165, IERC1155, IERC1155MetadataURI{
usingAddressforaddress;
// Mapping from token ID to account balancesmapping(uint256=>mapping(address=>uint256)) private _balances;
// Mapping from account to operator approvalsmapping(address=>mapping(address=>bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.jsonstringprivate _uri;
/**
* @dev See {_setURI}.
*/constructor(stringmemory uri_) {
_setURI(uri_);
}
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverride(ERC165, IERC165) returns (bool) {
return
interfaceId ==type(IERC1155).interfaceId||
interfaceId ==type(IERC1155MetadataURI).interfaceId||super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/functionuri(uint256) publicviewvirtualoverridereturns (stringmemory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/functionbalanceOf(address account, uint256 id) publicviewvirtualoverridereturns (uint256) {
require(account !=address(0), "ERC1155: address zero is not a valid owner");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/functionbalanceOfBatch(address[] memory accounts, uint256[] memory ids)
publicviewvirtualoverridereturns (uint256[] memory)
{
require(accounts.length== ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances =newuint256[](accounts.length);
for (uint256 i =0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/functionsetApprovalForAll(address operator, bool approved) publicvirtualoverride{
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/functionisApprovedForAll(address account, address operator) publicviewvirtualoverridereturns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 id,
uint256 amount,
bytesmemory data
) publicvirtualoverride{
require(
from== _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not token owner nor approved"
);
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/functionsafeBatchTransferFrom(addressfrom,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
) publicvirtualoverride{
require(
from== _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not token owner nor approved"
);
_safeBatchTransferFrom(from, to, ids, amounts, data);
}
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/function_safeTransferFrom(addressfrom,
address to,
uint256 id,
uint256 amount,
bytesmemory data
) internalvirtual{
require(to !=address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_afterTokenTransfer(operator, from, to, ids, amounts, data);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/function_safeBatchTransferFrom(addressfrom,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
) internalvirtual{
require(ids.length== amounts.length, "ERC1155: ids and amounts length mismatch");
require(to !=address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i =0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_afterTokenTransfer(operator, from, to, ids, amounts, data);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/function_setURI(stringmemory newuri) internalvirtual{
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/function_mint(address to,
uint256 id,
uint256 amount,
bytesmemory data
) internalvirtual{
require(to !=address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
_balances[id][to] += amount;
emit TransferSingle(operator, address(0), to, id, amount);
_afterTokenTransfer(operator, address(0), to, ids, amounts, data);
_doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/function_mintBatch(address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
) internalvirtual{
require(to !=address(0), "ERC1155: mint to the zero address");
require(ids.length== amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint256 i =0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_afterTokenTransfer(operator, address(0), to, ids, amounts, data);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `from`
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `from` must have at least `amount` tokens of token type `id`.
*/function_burn(addressfrom,
uint256 id,
uint256 amount
) internalvirtual{
require(from!=address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
emit TransferSingle(operator, from, address(0), id, amount);
_afterTokenTransfer(operator, from, address(0), ids, amounts, "");
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/function_burnBatch(addressfrom,
uint256[] memory ids,
uint256[] memory amounts
) internalvirtual{
require(from!=address(0), "ERC1155: burn from the zero address");
require(ids.length== amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
for (uint256 i =0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
}
emit TransferBatch(operator, from, address(0), ids, amounts);
_afterTokenTransfer(operator, from, address(0), ids, amounts, "");
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/function_setApprovalForAll(address owner,
address operator,
bool approved
) internalvirtual{
require(owner != operator, "ERC1155: setting approval status for self");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `ids` and `amounts` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/function_beforeTokenTransfer(address operator,
addressfrom,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
) internalvirtual{}
/**
* @dev Hook that is called after any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/function_afterTokenTransfer(address operator,
addressfrom,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
) internalvirtual{}
function_doSafeTransferAcceptanceCheck(address operator,
addressfrom,
address to,
uint256 id,
uint256 amount,
bytesmemory data
) private{
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155Receiver.onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catchError(stringmemory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function_doSafeBatchTransferAcceptanceCheck(address operator,
addressfrom,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
) private{
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
bytes4 response
) {
if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catchError(stringmemory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function_asSingletonArray(uint256 element) privatepurereturns (uint256[] memory) {
uint256[] memory array =newuint256[](1);
array[0] = element;
return array;
}
}
Contract Source Code
File 5 of 22: ERC1155Burnable.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC1155/extensions/ERC1155Burnable.sol)pragmasolidity ^0.8.0;import"../ERC1155.sol";
/**
* @dev Extension of {ERC1155} that allows token holders to destroy both their
* own tokens and those that they have been approved to use.
*
* _Available since v3.1._
*/abstractcontractERC1155BurnableisERC1155{
functionburn(address account,
uint256 id,
uint256 value
) publicvirtual{
require(
account == _msgSender() || isApprovedForAll(account, _msgSender()),
"ERC1155: caller is not token owner nor approved"
);
_burn(account, id, value);
}
functionburnBatch(address account,
uint256[] memory ids,
uint256[] memory values
) publicvirtual{
require(
account == _msgSender() || isApprovedForAll(account, _msgSender()),
"ERC1155: caller is not token owner nor approved"
);
_burnBatch(account, ids, values);
}
}
Contract Source Code
File 6 of 22: ERC1155Supply.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC1155/extensions/ERC1155Supply.sol)pragmasolidity ^0.8.0;import"../ERC1155.sol";
/**
* @dev Extension of ERC1155 that adds tracking of total supply per id.
*
* Useful for scenarios where Fungible and Non-fungible tokens have to be
* clearly identified. Note: While a totalSupply of 1 might mean the
* corresponding is an NFT, there is no guarantees that no other token with the
* same id are not going to be minted.
*/abstractcontractERC1155SupplyisERC1155{
mapping(uint256=>uint256) private _totalSupply;
/**
* @dev Total amount of tokens in with a given id.
*/functiontotalSupply(uint256 id) publicviewvirtualreturns (uint256) {
return _totalSupply[id];
}
/**
* @dev Indicates whether any token exist with a given id, or not.
*/functionexists(uint256 id) publicviewvirtualreturns (bool) {
return ERC1155Supply.totalSupply(id) >0;
}
/**
* @dev See {ERC1155-_beforeTokenTransfer}.
*/function_beforeTokenTransfer(address operator,
addressfrom,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytesmemory data
) internalvirtualoverride{
super._beforeTokenTransfer(operator, from, to, ids, amounts, data);
if (from==address(0)) {
for (uint256 i =0; i < ids.length; ++i) {
_totalSupply[ids[i]] += amounts[i];
}
}
if (to ==address(0)) {
for (uint256 i =0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 supply = _totalSupply[id];
require(supply >= amount, "ERC1155: burn amount exceeds totalSupply");
unchecked {
_totalSupply[id] = supply - amount;
}
}
}
}
}
Contract Source Code
File 7 of 22: ERC165.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)pragmasolidity ^0.8.0;import"./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/abstractcontractERC165isIERC165{
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverridereturns (bool) {
return interfaceId ==type(IERC165).interfaceId;
}
}
Contract Source Code
File 8 of 22: IERC1155.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC1155/IERC1155.sol)pragmasolidity ^0.8.0;import"../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/interfaceIERC1155isIERC165{
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/eventTransferSingle(addressindexed operator, addressindexedfrom, addressindexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/eventTransferBatch(addressindexed operator,
addressindexedfrom,
addressindexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/eventApprovalForAll(addressindexed account, addressindexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/eventURI(string value, uint256indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/functionbalanceOf(address account, uint256 id) externalviewreturns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/functionbalanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
externalviewreturns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/functionsetApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/functionisApprovedForAll(address account, address operator) externalviewreturns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 id,
uint256 amount,
bytescalldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/functionsafeBatchTransferFrom(addressfrom,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytescalldata data
) external;
}
Contract Source Code
File 9 of 22: IERC1155MetadataURI.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)pragmasolidity ^0.8.0;import"../IERC1155.sol";
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/interfaceIERC1155MetadataURIisIERC1155{
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/functionuri(uint256 id) externalviewreturns (stringmemory);
}
Contract Source Code
File 10 of 22: IERC1155Receiver.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)pragmasolidity ^0.8.0;import"../../utils/introspection/IERC165.sol";
/**
* @dev _Available since v3.1._
*/interfaceIERC1155ReceiverisIERC165{
/**
* @dev Handles the receipt of a single ERC1155 token type. This function is
* called at the end of a `safeTransferFrom` after the balance has been updated.
*
* NOTE: To accept the transfer, this must return
* `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
* (i.e. 0xf23a6e61, or its own function selector).
*
* @param operator The address which initiated the transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param id The ID of the token being transferred
* @param value The amount of tokens being transferred
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/functiononERC1155Received(address operator,
addressfrom,
uint256 id,
uint256 value,
bytescalldata data
) externalreturns (bytes4);
/**
* @dev Handles the receipt of a multiple ERC1155 token types. This function
* is called at the end of a `safeBatchTransferFrom` after the balances have
* been updated.
*
* NOTE: To accept the transfer(s), this must return
* `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
* (i.e. 0xbc197c81, or its own function selector).
*
* @param operator The address which initiated the batch transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param ids An array containing ids of each token being transferred (order and length must match values array)
* @param values An array containing amounts of each token being transferred (order and length must match ids array)
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/functiononERC1155BatchReceived(address operator,
addressfrom,
uint256[] calldata ids,
uint256[] calldata values,
bytescalldata data
) externalreturns (bytes4);
}
Contract Source Code
File 11 of 22: IERC165.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)pragmasolidity ^0.8.0;/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/interfaceIERC165{
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/functionsupportsInterface(bytes4 interfaceId) externalviewreturns (bool);
}
Contract Source Code
File 12 of 22: IERC20.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)pragmasolidity ^0.8.0;/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/interfaceIERC20{
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/eventTransfer(addressindexedfrom, addressindexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/eventApproval(addressindexed owner, addressindexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/functiontotalSupply() externalviewreturns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/functionbalanceOf(address account) externalviewreturns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/functiontransfer(address to, uint256 amount) externalreturns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/functionallowance(address owner, address spender) externalviewreturns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/functionapprove(address spender, uint256 amount) externalreturns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/functiontransferFrom(addressfrom,
address to,
uint256 amount
) externalreturns (bool);
}
Contract Source Code
File 13 of 22: IERC721.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)pragmasolidity ^0.8.0;import"../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/interfaceIERC721isIERC165{
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/eventTransfer(addressindexedfrom, addressindexed to, uint256indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/eventApproval(addressindexed owner, addressindexed approved, uint256indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/eventApprovalForAll(addressindexed owner, addressindexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/functionbalanceOf(address owner) externalviewreturns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/functionownerOf(uint256 tokenId) externalviewreturns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 tokenId,
bytescalldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/functiontransferFrom(addressfrom,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/functionapprove(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/functionsetApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/functiongetApproved(uint256 tokenId) externalviewreturns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/functionisApprovedForAll(address owner, address operator) externalviewreturns (bool);
}
Contract Source Code
File 14 of 22: MerkleProof.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (utils/cryptography/MerkleProof.sol)pragmasolidity ^0.8.0;/**
* @dev These functions deal with verification of Merkle Tree proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*
* WARNING: You should avoid using leaf values that are 64 bytes long prior to
* hashing, or use a hash function other than keccak256 for hashing leaves.
* This is because the concatenation of a sorted pair of internal nodes in
* the merkle tree could be reinterpreted as a leaf value.
*/libraryMerkleProof{
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/functionverify(bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internalpurereturns (bool) {
return processProof(proof, leaf) == root;
}
/**
* @dev Calldata version of {verify}
*
* _Available since v4.7._
*/functionverifyCalldata(bytes32[] calldata proof,
bytes32 root,
bytes32 leaf
) internalpurereturns (bool) {
return processProofCalldata(proof, leaf) == root;
}
/**
* @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
* from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
* hash matches the root of the tree. When processing the proof, the pairs
* of leafs & pre-images are assumed to be sorted.
*
* _Available since v4.4._
*/functionprocessProof(bytes32[] memory proof, bytes32 leaf) internalpurereturns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i =0; i < proof.length; i++) {
computedHash = _hashPair(computedHash, proof[i]);
}
return computedHash;
}
/**
* @dev Calldata version of {processProof}
*
* _Available since v4.7._
*/functionprocessProofCalldata(bytes32[] calldata proof, bytes32 leaf) internalpurereturns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i =0; i < proof.length; i++) {
computedHash = _hashPair(computedHash, proof[i]);
}
return computedHash;
}
/**
* @dev Returns true if the `leaves` can be proved to be a part of a Merkle tree defined by
* `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.
*
* _Available since v4.7._
*/functionmultiProofVerify(bytes32[] memory proof,
bool[] memory proofFlags,
bytes32 root,
bytes32[] memory leaves
) internalpurereturns (bool) {
return processMultiProof(proof, proofFlags, leaves) == root;
}
/**
* @dev Calldata version of {multiProofVerify}
*
* _Available since v4.7._
*/functionmultiProofVerifyCalldata(bytes32[] calldata proof,
bool[] calldata proofFlags,
bytes32 root,
bytes32[] memory leaves
) internalpurereturns (bool) {
return processMultiProofCalldata(proof, proofFlags, leaves) == root;
}
/**
* @dev Returns the root of a tree reconstructed from `leaves` and the sibling nodes in `proof`,
* consuming from one or the other at each step according to the instructions given by
* `proofFlags`.
*
* _Available since v4.7._
*/functionprocessMultiProof(bytes32[] memory proof,
bool[] memory proofFlags,
bytes32[] memory leaves
) internalpurereturns (bytes32 merkleRoot) {
// This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by// consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the// `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of// the merkle tree.uint256 leavesLen = leaves.length;
uint256 totalHashes = proofFlags.length;
// Check proof validity.require(leavesLen + proof.length-1== totalHashes, "MerkleProof: invalid multiproof");
// The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using// `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".bytes32[] memory hashes =newbytes32[](totalHashes);
uint256 leafPos =0;
uint256 hashPos =0;
uint256 proofPos =0;
// At each step, we compute the next hash using two values:// - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we// get the next hash.// - depending on the flag, either another value for the "main queue" (merging branches) or an element from the// `proof` array.for (uint256 i =0; i < totalHashes; i++) {
bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
bytes32 b = proofFlags[i] ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++] : proof[proofPos++];
hashes[i] = _hashPair(a, b);
}
if (totalHashes >0) {
return hashes[totalHashes -1];
} elseif (leavesLen >0) {
return leaves[0];
} else {
return proof[0];
}
}
/**
* @dev Calldata version of {processMultiProof}
*
* _Available since v4.7._
*/functionprocessMultiProofCalldata(bytes32[] calldata proof,
bool[] calldata proofFlags,
bytes32[] memory leaves
) internalpurereturns (bytes32 merkleRoot) {
// This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by// consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the// `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of// the merkle tree.uint256 leavesLen = leaves.length;
uint256 totalHashes = proofFlags.length;
// Check proof validity.require(leavesLen + proof.length-1== totalHashes, "MerkleProof: invalid multiproof");
// The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using// `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".bytes32[] memory hashes =newbytes32[](totalHashes);
uint256 leafPos =0;
uint256 hashPos =0;
uint256 proofPos =0;
// At each step, we compute the next hash using two values:// - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we// get the next hash.// - depending on the flag, either another value for the "main queue" (merging branches) or an element from the// `proof` array.for (uint256 i =0; i < totalHashes; i++) {
bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
bytes32 b = proofFlags[i] ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++] : proof[proofPos++];
hashes[i] = _hashPair(a, b);
}
if (totalHashes >0) {
return hashes[totalHashes -1];
} elseif (leavesLen >0) {
return leaves[0];
} else {
return proof[0];
}
}
function_hashPair(bytes32 a, bytes32 b) privatepurereturns (bytes32) {
return a < b ? _efficientHash(a, b) : _efficientHash(b, a);
}
function_efficientHash(bytes32 a, bytes32 b) privatepurereturns (bytes32 value) {
/// @solidity memory-safe-assemblyassembly {
mstore(0x00, a)
mstore(0x20, b)
value :=keccak256(0x00, 0x40)
}
}
}
Contract Source Code
File 15 of 22: Ownable.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)pragmasolidity ^0.8.0;import"../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/abstractcontractOwnableisContext{
addressprivate _owner;
eventOwnershipTransferred(addressindexed previousOwner, addressindexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/modifieronlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/functionowner() publicviewvirtualreturns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/function_checkOwner() internalviewvirtual{
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/functionrenounceOwnership() publicvirtualonlyOwner{
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/functiontransferOwnership(address newOwner) publicvirtualonlyOwner{
require(newOwner !=address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/function_transferOwnership(address newOwner) internalvirtual{
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (finance/PaymentSplitter.sol)pragmasolidity ^0.8.0;import"../token/ERC20/utils/SafeERC20.sol";
import"../utils/Address.sol";
import"../utils/Context.sol";
/**
* @title PaymentSplitter
* @dev This contract allows to split Ether payments among a group of accounts. The sender does not need to be aware
* that the Ether will be split in this way, since it is handled transparently by the contract.
*
* The split can be in equal parts or in any other arbitrary proportion. The way this is specified is by assigning each
* account to a number of shares. Of all the Ether that this contract receives, each account will then be able to claim
* an amount proportional to the percentage of total shares they were assigned. The distribution of shares is set at the
* time of contract deployment and can't be updated thereafter.
*
* `PaymentSplitter` follows a _pull payment_ model. This means that payments are not automatically forwarded to the
* accounts but kept in this contract, and the actual transfer is triggered as a separate step by calling the {release}
* function.
*
* NOTE: This contract assumes that ERC20 tokens will behave similarly to native tokens (Ether). Rebasing tokens, and
* tokens that apply fees during transfers, are likely to not be supported as expected. If in doubt, we encourage you
* to run tests before sending real value to this contract.
*/contractPaymentSplitterisContext{
eventPayeeAdded(address account, uint256 shares);
eventPaymentReleased(address to, uint256 amount);
eventERC20PaymentReleased(IERC20 indexed token, address to, uint256 amount);
eventPaymentReceived(addressfrom, uint256 amount);
uint256private _totalShares;
uint256private _totalReleased;
mapping(address=>uint256) private _shares;
mapping(address=>uint256) private _released;
address[] private _payees;
mapping(IERC20 =>uint256) private _erc20TotalReleased;
mapping(IERC20 =>mapping(address=>uint256)) private _erc20Released;
/**
* @dev Creates an instance of `PaymentSplitter` where each account in `payees` is assigned the number of shares at
* the matching position in the `shares` array.
*
* All addresses in `payees` must be non-zero. Both arrays must have the same non-zero length, and there must be no
* duplicates in `payees`.
*/constructor(address[] memory payees, uint256[] memory shares_) payable{
require(payees.length== shares_.length, "PaymentSplitter: payees and shares length mismatch");
require(payees.length>0, "PaymentSplitter: no payees");
for (uint256 i =0; i < payees.length; i++) {
_addPayee(payees[i], shares_[i]);
}
}
/**
* @dev The Ether received will be logged with {PaymentReceived} events. Note that these events are not fully
* reliable: it's possible for a contract to receive Ether without triggering this function. This only affects the
* reliability of the events, and not the actual splitting of Ether.
*
* To learn more about this see the Solidity documentation for
* https://solidity.readthedocs.io/en/latest/contracts.html#fallback-function[fallback
* functions].
*/receive() externalpayablevirtual{
emit PaymentReceived(_msgSender(), msg.value);
}
/**
* @dev Getter for the total shares held by payees.
*/functiontotalShares() publicviewreturns (uint256) {
return _totalShares;
}
/**
* @dev Getter for the total amount of Ether already released.
*/functiontotalReleased() publicviewreturns (uint256) {
return _totalReleased;
}
/**
* @dev Getter for the total amount of `token` already released. `token` should be the address of an IERC20
* contract.
*/functiontotalReleased(IERC20 token) publicviewreturns (uint256) {
return _erc20TotalReleased[token];
}
/**
* @dev Getter for the amount of shares held by an account.
*/functionshares(address account) publicviewreturns (uint256) {
return _shares[account];
}
/**
* @dev Getter for the amount of Ether already released to a payee.
*/functionreleased(address account) publicviewreturns (uint256) {
return _released[account];
}
/**
* @dev Getter for the amount of `token` tokens already released to a payee. `token` should be the address of an
* IERC20 contract.
*/functionreleased(IERC20 token, address account) publicviewreturns (uint256) {
return _erc20Released[token][account];
}
/**
* @dev Getter for the address of the payee number `index`.
*/functionpayee(uint256 index) publicviewreturns (address) {
return _payees[index];
}
/**
* @dev Getter for the amount of payee's releasable Ether.
*/functionreleasable(address account) publicviewreturns (uint256) {
uint256 totalReceived =address(this).balance+ totalReleased();
return _pendingPayment(account, totalReceived, released(account));
}
/**
* @dev Getter for the amount of payee's releasable `token` tokens. `token` should be the address of an
* IERC20 contract.
*/functionreleasable(IERC20 token, address account) publicviewreturns (uint256) {
uint256 totalReceived = token.balanceOf(address(this)) + totalReleased(token);
return _pendingPayment(account, totalReceived, released(token, account));
}
/**
* @dev Triggers a transfer to `account` of the amount of Ether they are owed, according to their percentage of the
* total shares and their previous withdrawals.
*/functionrelease(addresspayable account) publicvirtual{
require(_shares[account] >0, "PaymentSplitter: account has no shares");
uint256 payment = releasable(account);
require(payment !=0, "PaymentSplitter: account is not due payment");
_released[account] += payment;
_totalReleased += payment;
Address.sendValue(account, payment);
emit PaymentReleased(account, payment);
}
/**
* @dev Triggers a transfer to `account` of the amount of `token` tokens they are owed, according to their
* percentage of the total shares and their previous withdrawals. `token` must be the address of an IERC20
* contract.
*/functionrelease(IERC20 token, address account) publicvirtual{
require(_shares[account] >0, "PaymentSplitter: account has no shares");
uint256 payment = releasable(token, account);
require(payment !=0, "PaymentSplitter: account is not due payment");
_erc20Released[token][account] += payment;
_erc20TotalReleased[token] += payment;
SafeERC20.safeTransfer(token, account, payment);
emit ERC20PaymentReleased(token, account, payment);
}
/**
* @dev internal logic for computing the pending payment of an `account` given the token historical balances and
* already released amounts.
*/function_pendingPayment(address account,
uint256 totalReceived,
uint256 alreadyReleased
) privateviewreturns (uint256) {
return (totalReceived * _shares[account]) / _totalShares - alreadyReleased;
}
/**
* @dev Add a new payee to the contract.
* @param account The address of the payee to add.
* @param shares_ The number of shares owned by the payee.
*/function_addPayee(address account, uint256 shares_) private{
require(account !=address(0), "PaymentSplitter: account is the zero address");
require(shares_ >0, "PaymentSplitter: shares are 0");
require(_shares[account] ==0, "PaymentSplitter: account already has shares");
_payees.push(account);
_shares[account] = shares_;
_totalShares = _totalShares + shares_;
emit PayeeAdded(account, shares_);
}
}
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)pragmasolidity ^0.8.0;import"../IERC20.sol";
import"../extensions/draft-IERC20Permit.sol";
import"../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/librarySafeERC20{
usingAddressforaddress;
functionsafeTransfer(
IERC20 token,
address to,
uint256 value
) internal{
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
functionsafeTransferFrom(
IERC20 token,
addressfrom,
address to,
uint256 value
) internal{
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/functionsafeApprove(
IERC20 token,
address spender,
uint256 value
) internal{
// safeApprove should only be called when setting an initial allowance,// or when resetting it to zero. To increase and decrease it, use// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'require(
(value ==0) || (token.allowance(address(this), spender) ==0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
functionsafeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal{
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
functionsafeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal{
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
functionsafePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal{
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore +1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/function_callOptionalReturn(IERC20 token, bytesmemory data) private{
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that// the target address contains contract code and also asserts for success in the low-level call.bytesmemory returndata =address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length>0) {
// Return data is optionalrequire(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
Contract Source Code
File 20 of 22: Strings.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)pragmasolidity ^0.8.0;/**
* @dev String operations.
*/libraryStrings{
bytes16privateconstant _HEX_SYMBOLS ="0123456789abcdef";
uint8privateconstant _ADDRESS_LENGTH =20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/functiontoString(uint256 value) internalpurereturns (stringmemory) {
// Inspired by OraclizeAPI's implementation - MIT licence// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.solif (value ==0) {
return"0";
}
uint256 temp = value;
uint256 digits;
while (temp !=0) {
digits++;
temp /=10;
}
bytesmemory buffer =newbytes(digits);
while (value !=0) {
digits -=1;
buffer[digits] =bytes1(uint8(48+uint256(value %10)));
value /=10;
}
returnstring(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/functiontoHexString(uint256 value) internalpurereturns (stringmemory) {
if (value ==0) {
return"0x00";
}
uint256 temp = value;
uint256 length =0;
while (temp !=0) {
length++;
temp >>=8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/functiontoHexString(uint256 value, uint256 length) internalpurereturns (stringmemory) {
bytesmemory buffer =newbytes(2* length +2);
buffer[0] ="0";
buffer[1] ="x";
for (uint256 i =2* length +1; i >1; --i) {
buffer[i] = _HEX_SYMBOLS[value &0xf];
value >>=4;
}
require(value ==0, "Strings: hex length insufficient");
returnstring(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/functiontoHexString(address addr) internalpurereturns (stringmemory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
Contract Source Code
File 21 of 22: WagmiUnited.sol
// SPDX-License-Identifier: MITpragmasolidity ^0.8.15;import"@openzeppelin/contracts/utils/Counters.sol";
import"@openzeppelin/contracts/token/ERC721/IERC721.sol";
import"@openzeppelin/contracts/token/ERC1155/IERC1155.sol";
import"@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";
import"@openzeppelin/contracts/utils/Strings.sol";
import"@openzeppelin/contracts/finance/PaymentSplitter.sol";
import"./PVAllowlist.sol";
import"./PvERC1155.sol";
/*
* @title ERC1155 token for WAGMI
*/contractWagmiUnitedisPvERC1155, PVAllowlist, PaymentSplitter{
uint256publicconstant maxSupply =12000;
uint256publicconstant mintPrice =0.35ether;
uint256public maxPerTx =5;
uint256public tokenIdToMint =2;
uint256public publicWindowOpens;
uint256public mintingWindowCloses;
uint256public burnWindowOpens;
uint256public burnWindowCloses;
mapping(address=>uint256) public purchased;
uint256[] public stageWindows;
bytes32[] public merkleRoots;
eventRedeemed(uint256indexed idToRedeem, uint256indexed idToMint, addressindexed account, uint256 amount);
constructor(stringmemory _name,
stringmemory _symbol,
stringmemory _uri,
bytes32[] memory _merkleRoots,
uint256[] memory _stageWindows,
uint256 _mintingWindowCloses,
address[] memory payees,
uint256[] memory shares_
) PvERC1155(_name, _symbol, _uri) PaymentSplitter(payees, shares_) {
require(_stageWindows.length== _merkleRoots.length, "same length required");
mintingWindowCloses = _mintingWindowCloses;
merkleRoots = _merkleRoots;
stageWindows = _stageWindows;
_mint(msg.sender, 1, 158, "");
}
modifierwhenStageExists(uint256 stage) {
require(
stage < stageWindows.length, "stage does not exist"
);
_;
}
/**
* @notice set card id that can be minted by burning previous cards
*/functionstartNextPhase() externalonlyOwner{
tokenIdToMint +=1;
}
/**
* @notice emergency function to return to previous stage
*/functionreturnToPreviousPhase() externalonlyOwner{
require(tokenIdToMint >2, "Cannot go below phase 1");
tokenIdToMint -=1;
}
/**
* @notice set merkle roots for each stage
*
* @param _stage the index of the stage to change
* @param _merkleRoot array containing all merkle roots
*/functioneditMerkleRoot(uint256 _stage,
bytes32 _merkleRoot
) externalonlyOwnerwhenStageExists(_stage) {
merkleRoots[_stage] = _merkleRoot;
}
/**
* @notice edit windows
*
* @param _stage the index of the stage to change
* @param _windowOpens UNIX timestamp for window opening time
*/functioneditStageWindows(uint256 _stage,
uint256 _windowOpens
) externalonlyOwnerwhenStageExists(_stage) {
stageWindows[_stage] = _windowOpens;
}
/**
* @notice edit minting window
*
* @param _mintingWindowCloses UNIX timestamp for minting window closing time
*/functioneditMintingWindow(uint256 _mintingWindowCloses
) externalonlyOwner{
mintingWindowCloses = _mintingWindowCloses;
}
/**
* @notice edit mint price
*
* @param _maxPerTx max mint amount per tx
*/functioneditMaxPerTx(uint256 _maxPerTx
) externalonlyOwner{
maxPerTx = _maxPerTx;
}
/**
* @notice edit public window
*
* @param _publicWindowOpens UNIX timestamp for public window opening time
*/functioneditPublicWindow(uint256 _publicWindowOpens
) externalonlyOwner{
publicWindowOpens = _publicWindowOpens;
}
/**
* @notice edit burn windows
*
* @param _burnWindowOpens UNIX timestamp for burn window opening time
* @param _burnWindowCloses UNIX timestamp for burn window closing time
*/functioneditBurnWindow(uint256 _burnWindowOpens,
uint256 _burnWindowCloses
) externalonlyOwner{
burnWindowOpens = _burnWindowOpens;
burnWindowCloses = _burnWindowCloses;
}
/**
* @notice allowlisted mint function
*
* @param stage the stage to mint in
* @param amount the amount of tokens to purchase
* @param amount max amount of tokens wallet is eligible to purchase
* @param index the index of the merkle proof
* @param merkleProof the valid merkle proof of sender
*/functionmint(uint256 stage,
uint256 amount,
uint256 maxAmount,
uint256 index,
bytes32[] calldata merkleProof
) externalpayablewhenStageExists(stage) whenInAllowlist(index, maxAmount, merkleProof, merkleRoots[stage]) {
require(purchased[msg.sender] + amount <= maxAmount && amount >0, "max amount exceeded");
require(block.timestamp> stageWindows[stage] &&block.timestamp< mintingWindowCloses, "minting closed");
require(totalSupply(1) + amount <= maxSupply, "Purchase: Max supply reached");
require(msg.value== amount * mintPrice, "Purchase: Incorrect payment");
unchecked {
purchased[msg.sender] += amount;
}
_mint(msg.sender, 1, amount, "");
}
/**
* @notice purchase during public sale
*
* @param amount the amount of tokens to purchase
*/functionpublicMint(uint256 amount) externalpayable{
require(amount >0&& amount <= maxPerTx, "max amount exceeded");
require(msg.value== amount * mintPrice, "Purchase: Incorrect payment");
require(totalSupply(1) + amount <= maxSupply, "Purchase: Max supply reached");
require(block.timestamp> publicWindowOpens &&block.timestamp< mintingWindowCloses, "Purchase: window closed");
_mint(msg.sender, 1, amount, "");
}
/**
* @notice redeem tokens for future phase
*
* @param tokenIdToRedeem the token id to redeem
* @param amount the amount of tokens to redeem
*/functionredeem(uint256 tokenIdToRedeem, uint256 amount) external{
require(amount >0, "Redeem: amount not allowed");
require(block.timestamp> burnWindowOpens &&block.timestamp< burnWindowCloses, "Redeem: window closed");
require(tokenIdToRedeem < tokenIdToMint, "Redeem: cannot be redeemed");
_burn(msg.sender, tokenIdToRedeem, amount);
_mint(msg.sender, tokenIdToMint, amount, "");
emit Redeemed(tokenIdToRedeem, tokenIdToMint, msg.sender, amount);
}
/**
* @notice Triggers a transfer to `account` of the amount of Ether they are owed, according to their percentage of the
* total shares and their previous withdrawals.
*
* @param account the payee to release funds for
*/functionrelease(addresspayable account) publicoverride{
require(msg.sender== account ||msg.sender== owner(), "Release: no permission");
super.release(account);
}
/**
* @notice Mints the given amount of token id 0 to specified receiver address
*
* @param _receiver the receiving wallet
* @param _amount the amount of tokens to mint
*/functionownerMint(address _receiver, uint256 _amount) externalonlyOwner{
require(totalSupply(1) + _amount <= maxSupply, "Purchase: Max supply reached");
_mint(_receiver, 1, _amount, "");
}
functionsetURI(stringmemory baseURI) externalonlyOwner{
_setURI(baseURI);
}
/**
* @notice returns the metadata uri for a given id
*
* @param _id the card id to return metadata for
*/functionuri(uint256 _id) publicviewoverridereturns (stringmemory) {
require(exists(_id), "URI: nonexistent token");
returnstring(abi.encodePacked(super.uri(_id), Strings.toString(_id)));
}
}
Contract Source Code
File 22 of 22: draft-IERC20Permit.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)pragmasolidity ^0.8.0;/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/interfaceIERC20Permit{
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/functionpermit(address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/functionnonces(address owner) externalviewreturns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/// solhint-disable-next-line func-name-mixedcasefunctionDOMAIN_SEPARATOR() externalviewreturns (bytes32);
}