// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/**
* @title Batch-mint Metadata
* @notice The `BatchMintMetadata` is a contract extension for any base NFT contract. It lets the smart contract
* using this extension set metadata for `n` number of NFTs all at once. This is enabled by storing a single
* base URI for a batch of `n` NFTs, where the metadata for each NFT in a relevant batch is `baseURI/tokenId`.
*/
contract BatchMintMetadata {
/// @dev Largest tokenId of each batch of tokens with the same baseURI.
uint256[] private batchIds;
/// @dev Mapping from id of a batch of tokens => to base URI for the respective batch of tokens.
mapping(uint256 => string) private baseURI;
/**
* @notice Returns the count of batches of NFTs.
* @dev Each batch of tokens has an in ID and an associated `baseURI`.
* See {batchIds}.
*/
function getBaseURICount() public view returns (uint256) {
return batchIds.length;
}
/**
* @notice Returns the ID for the batch of tokens the given tokenId belongs to.
* @dev See {getBaseURICount}.
* @param _index ID of a token.
*/
function getBatchIdAtIndex(uint256 _index) public view returns (uint256) {
if (_index >= getBaseURICount()) {
revert("Invalid index");
}
return batchIds[_index];
}
/// @dev Returns the id for the batch of tokens the given tokenId belongs to.
function _getBatchId(uint256 _tokenId) internal view returns (uint256 batchId, uint256 index) {
uint256 numOfTokenBatches = getBaseURICount();
uint256[] memory indices = batchIds;
for (uint256 i = 0; i < numOfTokenBatches; i += 1) {
if (_tokenId < indices[i]) {
index = i;
batchId = indices[i];
return (batchId, index);
}
}
revert("Invalid tokenId");
}
/// @dev Returns the baseURI for a token. The intended metadata URI for the token is baseURI + tokenId.
function _getBaseURI(uint256 _tokenId) internal view returns (string memory) {
uint256 numOfTokenBatches = getBaseURICount();
uint256[] memory indices = batchIds;
for (uint256 i = 0; i < numOfTokenBatches; i += 1) {
if (_tokenId < indices[i]) {
return baseURI[indices[i]];
}
}
revert("Invalid tokenId");
}
/// @dev Sets the base URI for the batch of tokens with the given batchId.
function _setBaseURI(uint256 _batchId, string memory _baseURI) internal {
baseURI[_batchId] = _baseURI;
}
/// @dev Mints a batch of tokenIds and associates a common baseURI to all those Ids.
function _batchMintMetadata(
uint256 _startId,
uint256 _amountToMint,
string memory _baseURIForTokens
) internal returns (uint256 nextTokenIdToMint, uint256 batchId) {
batchId = _startId + _amountToMint;
nextTokenIdToMint = batchId;
batchIds.push(batchId);
baseURI[batchId] = _baseURIForTokens;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "./interface/IContractMetadata.sol";
/**
* @title Contract Metadata
* @notice Thirdweb's `ContractMetadata` is a contract extension for any base contracts. It lets you set a metadata URI
* for you contract.
* Additionally, `ContractMetadata` is necessary for NFT contracts that want royalties to get distributed on OpenSea.
*/
abstract contract ContractMetadata is IContractMetadata {
/// @notice Returns the contract metadata URI.
string public override contractURI;
/**
* @notice Lets a contract admin set the URI for contract-level metadata.
* @dev Caller should be authorized to setup contractURI, e.g. contract admin.
* See {_canSetContractURI}.
* Emits {ContractURIUpdated Event}.
*
* @param _uri keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
*/
function setContractURI(string memory _uri) external override {
if (!_canSetContractURI()) {
revert("Not authorized");
}
_setupContractURI(_uri);
}
/// @dev Lets a contract admin set the URI for contract-level metadata.
function _setupContractURI(string memory _uri) internal {
string memory prevURI = contractURI;
contractURI = _uri;
emit ContractURIUpdated(prevURI, _uri);
}
/// @dev Returns whether contract metadata can be set in the given execution context.
function _canSetContractURI() internal view virtual returns (bool);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
// Helper interfaces
import { IWETH } from "../interfaces/IWETH.sol";
import "../openzeppelin-presets/token/ERC20/utils/SafeERC20.sol";
library CurrencyTransferLib {
using SafeERC20 for IERC20;
/// @dev The address interpreted as native token of the chain.
address public constant NATIVE_TOKEN = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
/// @dev Transfers a given amount of currency.
function transferCurrency(
address _currency,
address _from,
address _to,
uint256 _amount
) internal {
if (_amount == 0) {
return;
}
if (_currency == NATIVE_TOKEN) {
safeTransferNativeToken(_to, _amount);
} else {
safeTransferERC20(_currency, _from, _to, _amount);
}
}
/// @dev Transfers a given amount of currency. (With native token wrapping)
function transferCurrencyWithWrapper(
address _currency,
address _from,
address _to,
uint256 _amount,
address _nativeTokenWrapper
) internal {
if (_amount == 0) {
return;
}
if (_currency == NATIVE_TOKEN) {
if (_from == address(this)) {
// withdraw from weth then transfer withdrawn native token to recipient
IWETH(_nativeTokenWrapper).withdraw(_amount);
safeTransferNativeTokenWithWrapper(_to, _amount, _nativeTokenWrapper);
} else if (_to == address(this)) {
// store native currency in weth
require(_amount == msg.value, "msg.value != amount");
IWETH(_nativeTokenWrapper).deposit{ value: _amount }();
} else {
safeTransferNativeTokenWithWrapper(_to, _amount, _nativeTokenWrapper);
}
} else {
safeTransferERC20(_currency, _from, _to, _amount);
}
}
/// @dev Transfer `amount` of ERC20 token from `from` to `to`.
function safeTransferERC20(
address _currency,
address _from,
address _to,
uint256 _amount
) internal {
if (_from == _to) {
return;
}
if (_from == address(this)) {
IERC20(_currency).safeTransfer(_to, _amount);
} else {
IERC20(_currency).safeTransferFrom(_from, _to, _amount);
}
}
/// @dev Transfers `amount` of native token to `to`.
function safeTransferNativeToken(address to, uint256 value) internal {
// solhint-disable avoid-low-level-calls
// slither-disable-next-line low-level-calls
(bool success, ) = to.call{ value: value }("");
require(success, "native token transfer failed");
}
/// @dev Transfers `amount` of native token to `to`. (With native token wrapping)
function safeTransferNativeTokenWithWrapper(
address to,
uint256 value,
address _nativeTokenWrapper
) internal {
// solhint-disable avoid-low-level-calls
// slither-disable-next-line low-level-calls
(bool success, ) = to.call{ value: value }("");
if (!success) {
IWETH(_nativeTokenWrapper).deposit{ value: value }();
IERC20(_nativeTokenWrapper).safeTransfer(to, value);
}
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "./interface/IDelayedReveal.sol";
/**
* @title Delayed Reveal
* @notice Thirdweb's `DelayedReveal` is a contract extension for base NFT contracts. It lets you create batches of
* 'delayed-reveal' NFTs. You can learn more about the usage of delayed reveal NFTs here - https://blog.thirdweb.com/delayed-reveal-nfts
*/
abstract contract DelayedReveal is IDelayedReveal {
/// @dev Mapping from tokenId of a batch of tokens => to delayed reveal data.
mapping(uint256 => bytes) public encryptedData;
/// @dev Sets the delayed reveal data for a batchId.
function _setEncryptedData(uint256 _batchId, bytes memory _encryptedData) internal {
encryptedData[_batchId] = _encryptedData;
}
/**
* @notice Returns revealed URI for a batch of NFTs.
* @dev Reveal encrypted base URI for `_batchId` with caller/admin's `_key` used for encryption.
* Reverts if there's no encrypted URI for `_batchId`.
* See {encryptDecrypt}.
*
* @param _batchId ID of the batch for which URI is being revealed.
* @param _key Secure key used by caller/admin for encryption of baseURI.
*
* @return revealedURI Decrypted base URI.
*/
function getRevealURI(uint256 _batchId, bytes calldata _key) public view returns (string memory revealedURI) {
bytes memory data = encryptedData[_batchId];
if (data.length == 0) {
revert("Nothing to reveal");
}
(bytes memory encryptedURI, bytes32 provenanceHash) = abi.decode(data, (bytes, bytes32));
revealedURI = string(encryptDecrypt(encryptedURI, _key));
require(keccak256(abi.encodePacked(revealedURI, _key, block.chainid)) == provenanceHash, "Incorrect key");
}
/**
* @notice Encrypt/decrypt data on chain.
* @dev Encrypt/decrypt given `data` with `key`. Uses inline assembly.
* See: https://ethereum.stackexchange.com/questions/69825/decrypt-message-on-chain
*
* @param data Bytes of data to encrypt/decrypt.
* @param key Secure key used by caller for encryption/decryption.
*
* @return result Output after encryption/decryption of given data.
*/
function encryptDecrypt(bytes memory data, bytes calldata key) public pure override returns (bytes memory result) {
// Store data length on stack for later use
uint256 length = data.length;
// solhint-disable-next-line no-inline-assembly
assembly {
// Set result to free memory pointer
result := mload(0x40)
// Increase free memory pointer by lenght + 32
mstore(0x40, add(add(result, length), 32))
// Set result length
mstore(result, length)
}
// Iterate over the data stepping by 32 bytes
for (uint256 i = 0; i < length; i += 32) {
// Generate hash of the key and offset
bytes32 hash = keccak256(abi.encodePacked(key, i));
bytes32 chunk;
// solhint-disable-next-line no-inline-assembly
assembly {
// Read 32-bytes data chunk
chunk := mload(add(data, add(i, 32)))
}
// XOR the chunk with hash
chunk ^= hash;
// solhint-disable-next-line no-inline-assembly
assembly {
// Write 32-byte encrypted chunk
mstore(add(result, add(i, 32)), chunk)
}
}
}
/**
* @notice Returns whether the relvant batch of NFTs is subject to a delayed reveal.
* @dev Returns `true` if `_batchId`'s base URI is encrypted.
* @param _batchId ID of a batch of NFTs.
*/
function isEncryptedBatch(uint256 _batchId) public view returns (bool) {
return encryptedData[_batchId].length > 0;
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "./interface/IDrop.sol";
import "../lib/MerkleProof.sol";
import "../lib/TWBitMaps.sol";
abstract contract Drop is IDrop {
using TWBitMaps for TWBitMaps.BitMap;
/*///////////////////////////////////////////////////////////////
State variables
//////////////////////////////////////////////////////////////*/
/// @dev The active conditions for claiming tokens.
ClaimConditionList public claimCondition;
/*///////////////////////////////////////////////////////////////
Drop logic
//////////////////////////////////////////////////////////////*/
/// @dev Lets an account claim tokens.
function claim(
address _receiver,
uint256 _quantity,
address _currency,
uint256 _pricePerToken,
AllowlistProof calldata _allowlistProof,
bytes memory _data
) public payable virtual override {
_beforeClaim(_receiver, _quantity, _currency, _pricePerToken, _allowlistProof, _data);
uint256 activeConditionId = getActiveClaimConditionId();
ClaimCondition memory currentClaimPhase = claimCondition.conditions[activeConditionId];
/**
* We make allowlist checks (i.e. verifyClaimMerkleProof) before verifying the claim's general
* validity (i.e. verifyClaim) because we give precedence to the check of allow list quantity
* restriction over the check of the general claim condition's quantityLimitPerTransaction
* restriction.
*/
// Verify inclusion in allowlist.
(bool validMerkleProof, uint256 merkleProofIndex) = verifyClaimMerkleProof(
activeConditionId,
_dropMsgSender(),
_quantity,
_allowlistProof
);
// Verify claim validity. If not valid, revert.
// when there's allowlist present --> verifyClaimMerkleProof will verify the maxQuantityInAllowlist value with hashed leaf in the allowlist
// when there's no allowlist, this check is true --> verifyClaim will check for _quantity being equal/less than the limit
bool toVerifyMaxQuantityPerTransaction = _allowlistProof.maxQuantityInAllowlist == 0 ||
currentClaimPhase.merkleRoot == bytes32(0);
verifyClaim(
activeConditionId,
_dropMsgSender(),
_quantity,
_currency,
_pricePerToken,
toVerifyMaxQuantityPerTransaction
);
if (validMerkleProof && _allowlistProof.maxQuantityInAllowlist > 0) {
/**
* Mark the claimer's use of their position in the allowlist. A spot in an allowlist
* can be used only once.
*/
claimCondition.usedAllowlistSpot[activeConditionId].set(merkleProofIndex);
}
// Update contract state.
claimCondition.conditions[activeConditionId].supplyClaimed += _quantity;
claimCondition.lastClaimTimestamp[activeConditionId][_dropMsgSender()] = block.timestamp;
// If there's a price, collect price.
_collectPriceOnClaim(_quantity, _currency, _pricePerToken);
// Mint the relevant NFTs to claimer.
uint256 startTokenId = _transferTokensOnClaim(_receiver, _quantity);
emit TokensClaimed(activeConditionId, _dropMsgSender(), _receiver, startTokenId, _quantity);
_afterClaim(_receiver, _quantity, _currency, _pricePerToken, _allowlistProof, _data);
}
/// @dev Lets a contract admin set claim conditions.
function setClaimConditions(ClaimCondition[] calldata _conditions, bool _resetClaimEligibility)
external
virtual
override
{
if (!_canSetClaimConditions()) {
revert Drop__NotAuthorized();
}
uint256 existingStartIndex = claimCondition.currentStartId;
uint256 existingPhaseCount = claimCondition.count;
/**
* `lastClaimTimestamp` and `usedAllowListSpot` are mappings that use a
* claim condition's UID as a key.
*
* If `_resetClaimEligibility == true`, we assign completely new UIDs to the claim
* conditions in `_conditions`, effectively resetting the restrictions on claims expressed
* by `lastClaimTimestamp` and `usedAllowListSpot`.
*/
uint256 newStartIndex = existingStartIndex;
if (_resetClaimEligibility) {
newStartIndex = existingStartIndex + existingPhaseCount;
}
claimCondition.count = _conditions.length;
claimCondition.currentStartId = newStartIndex;
uint256 lastConditionStartTimestamp;
for (uint256 i = 0; i < _conditions.length; i++) {
require(i == 0 || lastConditionStartTimestamp < _conditions[i].startTimestamp, "ST");
uint256 supplyClaimedAlready = claimCondition.conditions[newStartIndex + i].supplyClaimed;
if (supplyClaimedAlready > _conditions[i].maxClaimableSupply) {
revert Drop__MaxSupplyClaimedAlready(supplyClaimedAlready);
}
claimCondition.conditions[newStartIndex + i] = _conditions[i];
claimCondition.conditions[newStartIndex + i].supplyClaimed = supplyClaimedAlready;
lastConditionStartTimestamp = _conditions[i].startTimestamp;
}
/**
* Gas refunds (as much as possible)
*
* If `_resetClaimEligibility == true`, we assign completely new UIDs to the claim
* conditions in `_conditions`. So, we delete claim conditions with UID < `newStartIndex`.
*
* If `_resetClaimEligibility == false`, and there are more existing claim conditions
* than in `_conditions`, we delete the existing claim conditions that don't get replaced
* by the conditions in `_conditions`.
*/
if (_resetClaimEligibility) {
for (uint256 i = existingStartIndex; i < newStartIndex; i++) {
delete claimCondition.conditions[i];
delete claimCondition.usedAllowlistSpot[i];
}
} else {
if (existingPhaseCount > _conditions.length) {
for (uint256 i = _conditions.length; i < existingPhaseCount; i++) {
delete claimCondition.conditions[newStartIndex + i];
delete claimCondition.usedAllowlistSpot[newStartIndex + i];
}
}
}
emit ClaimConditionsUpdated(_conditions, _resetClaimEligibility);
}
/// @dev Checks a request to claim NFTs against the active claim condition's criteria.
function verifyClaim(
uint256 _conditionId,
address _claimer,
uint256 _quantity,
address _currency,
uint256 _pricePerToken,
bool verifyMaxQuantityPerTransaction
) public view {
ClaimCondition memory currentClaimPhase = claimCondition.conditions[_conditionId];
if (_currency != currentClaimPhase.currency || _pricePerToken != currentClaimPhase.pricePerToken) {
revert Drop__InvalidCurrencyOrPrice(
_currency,
currentClaimPhase.currency,
_pricePerToken,
currentClaimPhase.pricePerToken
);
}
// If we're checking for an allowlist quantity restriction, ignore the general quantity restriction.
if (
_quantity == 0 ||
(verifyMaxQuantityPerTransaction && _quantity > currentClaimPhase.quantityLimitPerTransaction)
) {
revert Drop__InvalidQuantity();
}
if (currentClaimPhase.supplyClaimed + _quantity > currentClaimPhase.maxClaimableSupply) {
revert Drop__ExceedMaxClaimableSupply(
currentClaimPhase.supplyClaimed,
currentClaimPhase.maxClaimableSupply
);
}
(uint256 lastClaimedAt, uint256 nextValidClaimTimestamp) = getClaimTimestamp(_conditionId, _claimer);
if (
currentClaimPhase.startTimestamp > block.timestamp ||
(lastClaimedAt != 0 && block.timestamp < nextValidClaimTimestamp)
) {
revert Drop__CannotClaimYet(
block.timestamp,
currentClaimPhase.startTimestamp,
lastClaimedAt,
nextValidClaimTimestamp
);
}
}
/// @dev Checks whether a claimer meets the claim condition's allowlist criteria.
function verifyClaimMerkleProof(
uint256 _conditionId,
address _claimer,
uint256 _quantity,
AllowlistProof calldata _allowlistProof
) public view returns (bool validMerkleProof, uint256 merkleProofIndex) {
ClaimCondition memory currentClaimPhase = claimCondition.conditions[_conditionId];
if (currentClaimPhase.merkleRoot != bytes32(0)) {
(validMerkleProof, merkleProofIndex) = MerkleProof.verify(
_allowlistProof.proof,
currentClaimPhase.merkleRoot,
keccak256(abi.encodePacked(_claimer, _allowlistProof.maxQuantityInAllowlist))
);
if (!validMerkleProof) {
revert Drop__NotInWhitelist();
}
if (claimCondition.usedAllowlistSpot[_conditionId].get(merkleProofIndex)) {
revert Drop__ProofClaimed();
}
if (_allowlistProof.maxQuantityInAllowlist != 0 && _quantity > _allowlistProof.maxQuantityInAllowlist) {
revert Drop__InvalidQuantityProof(_allowlistProof.maxQuantityInAllowlist);
}
}
}
/// @dev At any given moment, returns the uid for the active claim condition.
function getActiveClaimConditionId() public view returns (uint256) {
for (uint256 i = claimCondition.currentStartId + claimCondition.count; i > claimCondition.currentStartId; i--) {
if (block.timestamp >= claimCondition.conditions[i - 1].startTimestamp) {
return i - 1;
}
}
revert("!CONDITION.");
}
/// @dev Returns the claim condition at the given uid.
function getClaimConditionById(uint256 _conditionId) external view returns (ClaimCondition memory condition) {
condition = claimCondition.conditions[_conditionId];
}
/// @dev Returns the timestamp for when a claimer is eligible for claiming NFTs again.
function getClaimTimestamp(uint256 _conditionId, address _claimer)
public
view
returns (uint256 lastClaimTimestamp, uint256 nextValidClaimTimestamp)
{
lastClaimTimestamp = claimCondition.lastClaimTimestamp[_conditionId][_claimer];
unchecked {
nextValidClaimTimestamp =
lastClaimTimestamp +
claimCondition.conditions[_conditionId].waitTimeInSecondsBetweenClaims;
if (nextValidClaimTimestamp < lastClaimTimestamp) {
nextValidClaimTimestamp = type(uint256).max;
}
}
}
/*////////////////////////////////////////////////////////////////////
Optional hooks that can be implemented in the derived contract
///////////////////////////////////////////////////////////////////*/
/// @dev Exposes the ability to override the msg sender.
function _dropMsgSender() internal virtual returns (address) {
return msg.sender;
}
/// @dev Runs before every `claim` function call.
function _beforeClaim(
address _receiver,
uint256 _quantity,
address _currency,
uint256 _pricePerToken,
AllowlistProof calldata _allowlistProof,
bytes memory _data
) internal virtual {}
/// @dev Runs after every `claim` function call.
function _afterClaim(
address _receiver,
uint256 _quantity,
address _currency,
uint256 _pricePerToken,
AllowlistProof calldata _allowlistProof,
bytes memory _data
) internal virtual {}
/*///////////////////////////////////////////////////////////////
Virtual functions: to be implemented in derived contract
//////////////////////////////////////////////////////////////*/
/// @dev Collects and distributes the primary sale value of NFTs being claimed.
function _collectPriceOnClaim(
uint256 _quantityToClaim,
address _currency,
uint256 _pricePerToken
) internal virtual;
/// @dev Transfers the NFTs being claimed.
function _transferTokensOnClaim(address _to, uint256 _quantityBeingClaimed)
internal
virtual
returns (uint256 startTokenId);
/// @dev Determine what wallet can update claim conditions
function _canSetClaimConditions() internal view virtual returns (bool);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "./interface/IDropSinglePhase.sol";
import "../lib/MerkleProof.sol";
import "../lib/TWBitMaps.sol";
abstract contract DropSinglePhase is IDropSinglePhase {
using TWBitMaps for TWBitMaps.BitMap;
/*///////////////////////////////////////////////////////////////
State variables
//////////////////////////////////////////////////////////////*/
/// @dev The active conditions for claiming tokens.
ClaimCondition public claimCondition;
/// @dev The ID for the active claim condition.
bytes32 private conditionId;
/*///////////////////////////////////////////////////////////////
Mappings
//////////////////////////////////////////////////////////////*/
/**
* @dev Map from an account and uid for a claim condition, to the last timestamp
* at which the account claimed tokens under that claim condition.
*/
mapping(bytes32 => mapping(address => uint256)) private lastClaimTimestamp;
/**
* @dev Map from a claim condition uid to whether an address in an allowlist
* has already claimed tokens i.e. used their place in the allowlist.
*/
mapping(bytes32 => TWBitMaps.BitMap) private usedAllowlistSpot;
/*///////////////////////////////////////////////////////////////
Drop logic
//////////////////////////////////////////////////////////////*/
/// @dev Lets an account claim tokens.
function claim(
address _receiver,
uint256 _quantity,
address _currency,
uint256 _pricePerToken,
AllowlistProof calldata _allowlistProof,
bytes memory _data
) public payable virtual override {
_beforeClaim(_receiver, _quantity, _currency, _pricePerToken, _allowlistProof, _data);
bytes32 activeConditionId = conditionId;
/**
* We make allowlist checks (i.e. verifyClaimMerkleProof) before verifying the claim's general
* validity (i.e. verifyClaim) because we give precedence to the check of allow list quantity
* restriction over the check of the general claim condition's quantityLimitPerTransaction
* restriction.
*/
// Verify inclusion in allowlist.
(bool validMerkleProof, ) = verifyClaimMerkleProof(_dropMsgSender(), _quantity, _allowlistProof);
// Verify claim validity. If not valid, revert.
// when there's allowlist present --> verifyClaimMerkleProof will verify the maxQuantityInAllowlist value with hashed leaf in the allowlist
// when there's no allowlist, this check is true --> verifyClaim will check for _quantity being equal/less than the limit
bool toVerifyMaxQuantityPerTransaction = _allowlistProof.maxQuantityInAllowlist == 0 ||
claimCondition.merkleRoot == bytes32(0);
verifyClaim(_dropMsgSender(), _quantity, _currency, _pricePerToken, toVerifyMaxQuantityPerTransaction);
if (validMerkleProof && _allowlistProof.maxQuantityInAllowlist > 0) {
/**
* Mark the claimer's use of their position in the allowlist. A spot in an allowlist
* can be used only once.
*/
usedAllowlistSpot[activeConditionId].set(uint256(uint160(_dropMsgSender())));
}
// Update contract state.
claimCondition.supplyClaimed += _quantity;
lastClaimTimestamp[activeConditionId][_dropMsgSender()] = block.timestamp;
// If there's a price, collect price.
_collectPriceOnClaim(address(0), _quantity, _currency, _pricePerToken);
// Mint the relevant NFTs to claimer.
uint256 startTokenId = _transferTokensOnClaim(_receiver, _quantity);
emit TokensClaimed(_dropMsgSender(), _receiver, startTokenId, _quantity);
_afterClaim(_receiver, _quantity, _currency, _pricePerToken, _allowlistProof, _data);
}
/// @dev Lets a contract admin set claim conditions.
function setClaimConditions(ClaimCondition calldata _condition, bool _resetClaimEligibility) external override {
if (!_canSetClaimConditions()) {
revert("Not authorized");
}
bytes32 targetConditionId = conditionId;
uint256 supplyClaimedAlready = claimCondition.supplyClaimed;
if (_resetClaimEligibility) {
supplyClaimedAlready = 0;
targetConditionId = keccak256(abi.encodePacked(_dropMsgSender(), block.number));
}
if (supplyClaimedAlready > _condition.maxClaimableSupply) {
revert("max supply claimed");
}
claimCondition = ClaimCondition({
startTimestamp: _condition.startTimestamp,
maxClaimableSupply: _condition.maxClaimableSupply,
supplyClaimed: supplyClaimedAlready,
quantityLimitPerTransaction: _condition.quantityLimitPerTransaction,
waitTimeInSecondsBetweenClaims: _condition.waitTimeInSecondsBetweenClaims,
merkleRoot: _condition.merkleRoot,
pricePerToken: _condition.pricePerToken,
currency: _condition.currency
});
conditionId = targetConditionId;
emit ClaimConditionUpdated(_condition, _resetClaimEligibility);
}
/// @dev Checks a request to claim NFTs against the active claim condition's criteria.
function verifyClaim(
address _claimer,
uint256 _quantity,
address _currency,
uint256 _pricePerToken,
bool verifyMaxQuantityPerTransaction
) public view {
ClaimCondition memory currentClaimPhase = claimCondition;
if (_currency != currentClaimPhase.currency || _pricePerToken != currentClaimPhase.pricePerToken) {
revert("Invalid price or currency");
}
// If we're checking for an allowlist quantity restriction, ignore the general quantity restriction.
if (
_quantity == 0 ||
(verifyMaxQuantityPerTransaction && _quantity > currentClaimPhase.quantityLimitPerTransaction)
) {
revert("Invalid quantity");
}
if (currentClaimPhase.supplyClaimed + _quantity > currentClaimPhase.maxClaimableSupply) {
revert("exceeds max supply");
}
(uint256 lastClaimedAt, uint256 nextValidClaimTimestamp) = getClaimTimestamp(_claimer);
if (
currentClaimPhase.startTimestamp > block.timestamp ||
(lastClaimedAt != 0 && block.timestamp < nextValidClaimTimestamp)
) {
revert("cant claim yet");
}
}
/// @dev Checks whether a claimer meets the claim condition's allowlist criteria.
function verifyClaimMerkleProof(
address _claimer,
uint256 _quantity,
AllowlistProof calldata _allowlistProof
) public view returns (bool validMerkleProof, uint256 merkleProofIndex) {
ClaimCondition memory currentClaimPhase = claimCondition;
if (currentClaimPhase.merkleRoot != bytes32(0)) {
(validMerkleProof, merkleProofIndex) = MerkleProof.verify(
_allowlistProof.proof,
currentClaimPhase.merkleRoot,
keccak256(abi.encodePacked(_claimer, _allowlistProof.maxQuantityInAllowlist))
);
if (!validMerkleProof) {
revert("not in allowlist");
}
if (usedAllowlistSpot[conditionId].get(uint256(uint160(_claimer)))) {
revert("proof claimed");
}
if (_allowlistProof.maxQuantityInAllowlist != 0 && _quantity > _allowlistProof.maxQuantityInAllowlist) {
revert("Invalid qty proof");
}
}
}
/// @dev Returns the timestamp for when a claimer is eligible for claiming NFTs again.
function getClaimTimestamp(address _claimer)
public
view
returns (uint256 lastClaimedAt, uint256 nextValidClaimTimestamp)
{
lastClaimedAt = lastClaimTimestamp[conditionId][_claimer];
unchecked {
nextValidClaimTimestamp = lastClaimedAt + claimCondition.waitTimeInSecondsBetweenClaims;
if (nextValidClaimTimestamp < lastClaimedAt) {
nextValidClaimTimestamp = type(uint256).max;
}
}
}
/*////////////////////////////////////////////////////////////////////
Optional hooks that can be implemented in the derived contract
///////////////////////////////////////////////////////////////////*/
/// @dev Exposes the ability to override the msg sender.
function _dropMsgSender() internal virtual returns (address) {
return msg.sender;
}
/// @dev Runs before every `claim` function call.
function _beforeClaim(
address _receiver,
uint256 _quantity,
address _currency,
uint256 _pricePerToken,
AllowlistProof calldata _allowlistProof,
bytes memory _data
) internal virtual {}
/// @dev Runs after every `claim` function call.
function _afterClaim(
address _receiver,
uint256 _quantity,
address _currency,
uint256 _pricePerToken,
AllowlistProof calldata _allowlistProof,
bytes memory _data
) internal virtual {}
/// @dev Collects and distributes the primary sale value of NFTs being claimed.
function _collectPriceOnClaim(
address _primarySaleRecipient,
uint256 _quantityToClaim,
address _currency,
uint256 _pricePerToken
) internal virtual;
/// @dev Transfers the NFTs being claimed.
function _transferTokensOnClaim(address _to, uint256 _quantityBeingClaimed)
internal
virtual
returns (uint256 startTokenId);
function _canSetClaimConditions() internal view virtual returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./interface/IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import "./interface/IERC721A.sol";
import "../openzeppelin-presets/token/ERC721/IERC721Receiver.sol";
import "../lib/TWAddress.sol";
import "../openzeppelin-presets/utils/Context.sol";
import "../lib/TWStrings.sol";
import "./ERC165.sol";
/**
* @dev Implementation of [ERC721](https://eips.ethereum.org/EIPS/eip-721) Non-Fungible Token Standard, including
* the Metadata extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).
*
* Assumes that an owner cannot have more than 2^64 - 1 (max value of uint64) of supply.
*
* Assumes that the maximum token id cannot exceed 2^256 - 1 (max value of uint256).
*/
contract ERC721A is Context, ERC165, IERC721A {
using TWAddress for address;
using TWStrings for uint256;
// The tokenId of the next token to be minted.
uint256 internal _currentIndex;
// The number of tokens burned.
uint256 internal _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See _ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) internal _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
/**
* To change the starting tokenId, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev Burned tokens are calculated here, use _totalMinted() if you want to count just minted tokens.
*/
function totalSupply() public view override returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than _currentIndex - _startTokenId() times
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view returns (uint256) {
// Counter underflow is impossible as _currentIndex does not decrement,
// and it is initialized to _startTokenId()
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return uint256(_addressData[owner].balance);
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
return uint256(_addressData[owner].numberMinted);
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
return uint256(_addressData[owner].numberBurned);
}
/**
* Returns the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
return _addressData[owner].aux;
}
/**
* Sets the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal {
_addressData[owner].aux = aux;
}
/**
* Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around in the collection over time.
*/
function _ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr)
if (curr < _currentIndex) {
TokenOwnership memory ownership = _ownerships[curr];
if (!ownership.burned) {
if (ownership.addr != address(0)) {
return ownership;
}
// Invariant:
// There will always be an ownership that has an address and is not burned
// before an ownership that does not have an address and is not burned.
// Hence, curr will not underflow.
while (true) {
curr--;
ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return _ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
if (to == owner) revert ApprovalToCurrentOwner();
if (_msgSender() != owner)
if (!isApprovedForAll(owner, _msgSender())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
if (operator == _msgSender()) revert ApproveToCaller();
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
_transfer(from, to, tokenId);
if (to.isContract())
if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _startTokenId() <= tokenId && tokenId < _currentIndex && !_ownerships[tokenId].burned;
}
/**
* @dev Equivalent to `_safeMint(to, quantity, '')`.
*/
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, "");
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
unchecked {
_addressData[to].balance += uint64(quantity);
_addressData[to].numberMinted += uint64(quantity);
_ownerships[startTokenId].addr = to;
_ownerships[startTokenId].startTimestamp = uint64(block.timestamp);
uint256 updatedIndex = startTokenId;
uint256 end = updatedIndex + quantity;
if (to.isContract()) {
do {
emit Transfer(address(0), to, updatedIndex);
if (!_checkContractOnERC721Received(address(0), to, updatedIndex++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
} while (updatedIndex < end);
// Reentrancy protection
if (_currentIndex != startTokenId) revert();
} else {
do {
emit Transfer(address(0), to, updatedIndex++);
} while (updatedIndex < end);
}
_currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 quantity) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
unchecked {
_addressData[to].balance += uint64(quantity);
_addressData[to].numberMinted += uint64(quantity);
_ownerships[startTokenId].addr = to;
_ownerships[startTokenId].startTimestamp = uint64(block.timestamp);
uint256 updatedIndex = startTokenId;
uint256 end = updatedIndex + quantity;
do {
emit Transfer(address(0), to, updatedIndex++);
} while (updatedIndex < end);
_currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = _ownershipOf(tokenId);
if (prevOwnership.addr != from) revert TransferFromIncorrectOwner();
bool isApprovedOrOwner = (_msgSender() == from ||
isApprovedForAll(from, _msgSender()) ||
getApproved(tokenId) == _msgSender());
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, from);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
TokenOwnership storage currSlot = _ownerships[tokenId];
currSlot.addr = to;
currSlot.startTimestamp = uint64(block.timestamp);
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
TokenOwnership storage nextSlot = _ownerships[nextTokenId];
if (nextSlot.addr == address(0)) {
// This will suffice for checking _exists(nextTokenId),
// as a burned slot cannot contain the zero address.
if (nextTokenId != _currentIndex) {
nextSlot.addr = from;
nextSlot.startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Equivalent to `_burn(tokenId, false)`.
*/
function _burn(uint256 tokenId) internal virtual {
_burn(tokenId, false);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
TokenOwnership memory prevOwnership = _ownershipOf(tokenId);
address from = prevOwnership.addr;
if (approvalCheck) {
bool isApprovedOrOwner = (_msgSender() == from ||
isApprovedForAll(from, _msgSender()) ||
getApproved(tokenId) == _msgSender());
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
}
_beforeTokenTransfers(from, address(0), tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, from);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
AddressData storage addressData = _addressData[from];
addressData.balance -= 1;
addressData.numberBurned += 1;
// Keep track of who burned the token, and the timestamp of burning.
TokenOwnership storage currSlot = _ownerships[tokenId];
currSlot.addr = from;
currSlot.startTimestamp = uint64(block.timestamp);
currSlot.burned = true;
// If the ownership slot of tokenId+1 is not explicitly set, that means the burn initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
TokenOwnership storage nextSlot = _ownerships[nextTokenId];
if (nextSlot.addr == address(0)) {
// This will suffice for checking _exists(nextTokenId),
// as a burned slot cannot contain the zero address.
if (nextTokenId != _currentIndex) {
nextSlot.addr = from;
nextSlot.startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(from, address(0), tokenId);
_afterTokenTransfers(from, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
* And also called before burning one token.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
* And also called after one token has been burned.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import { ERC721A } from "../eip/ERC721A.sol";
import "../extension/ContractMetadata.sol";
import "../extension/Multicall.sol";
import "../extension/Ownable.sol";
import "../extension/Royalty.sol";
import "../extension/BatchMintMetadata.sol";
import "../extension/PrimarySale.sol";
import "../extension/PermissionsEnumerable.sol";
import "../extension/DropSinglePhase.sol";
import "../extension/LazyMint.sol";
import "../extension/DelayedReveal.sol";
import "../lib/TWStrings.sol";
import "../lib/CurrencyTransferLib.sol";
/**
* BASE: ERC721A
* EXTENSION: DropSinglePhase
*
* The `ERC721Drop` contract implements the ERC721 NFT standard, along with the ERC721A optimization to the standard.
* It includes the following additions to standard ERC721 logic:
*
* - Contract metadata for royalty support on platforms such as OpenSea that use
* off-chain information to distribute roaylties.
*
* - Ownership of the contract, with the ability to restrict certain functions to
* only be called by the contract's owner.
*
* - Multicall capability to perform multiple actions atomically
*
* - EIP 2981 compliance for royalty support on NFT marketplaces.
*
* The `drop` mechanism in the `DropSinglePhase` extension is a distribution mechanism for lazy minted tokens. It lets
* you set restrictions such as a price to charge, an allowlist etc. when an address atttempts to mint lazy minted tokens.
*
* The `ERC721Drop` contract lets you lazy mint tokens, and distribute those lazy minted tokens via the drop mechanism.
*/
contract ERC721Drop is
ERC721A,
ContractMetadata,
Multicall,
Ownable,
Royalty,
BatchMintMetadata,
PrimarySale,
LazyMint,
DelayedReveal,
DropSinglePhase
{
using TWStrings for uint256;
/*///////////////////////////////////////////////////////////////
Constructor
//////////////////////////////////////////////////////////////*/
constructor(
string memory _name,
string memory _symbol,
address _royaltyRecipient,
uint128 _royaltyBps,
address _primarySaleRecipient
) ERC721A(_name, _symbol) {
_setupOwner(msg.sender);
_setupDefaultRoyaltyInfo(_royaltyRecipient, _royaltyBps);
_setupPrimarySaleRecipient(_primarySaleRecipient);
}
/*//////////////////////////////////////////////////////////////
ERC165 Logic
//////////////////////////////////////////////////////////////*/
/// @dev See ERC165: https://eips.ethereum.org/EIPS/eip-165
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721A, IERC165) returns (bool) {
return
interfaceId == 0x01ffc9a7 || // ERC165 Interface ID for ERC165
interfaceId == 0x80ac58cd || // ERC165 Interface ID for ERC721
interfaceId == 0x5b5e139f || // ERC165 Interface ID for ERC721Metadata
interfaceId == type(IERC2981).interfaceId; // ERC165 ID for ERC2981
}
/*///////////////////////////////////////////////////////////////
Overriden ERC 721 logic
//////////////////////////////////////////////////////////////*/
/**
* @notice Returns the metadata URI for an NFT.
* @dev See `BatchMintMetadata` for handling of metadata in this contract.
*
* @param _tokenId The tokenId of an NFT.
*/
function tokenURI(uint256 _tokenId) public view virtual override returns (string memory) {
(uint256 batchId, ) = _getBatchId(_tokenId);
string memory batchUri = _getBaseURI(_tokenId);
if (isEncryptedBatch(batchId)) {
return string(abi.encodePacked(batchUri, "0"));
} else {
return string(abi.encodePacked(batchUri, _tokenId.toString()));
}
}
/*///////////////////////////////////////////////////////////////
Overriden lazy minting logic
//////////////////////////////////////////////////////////////*/
/**
* @notice Lets an authorized address lazy mint a given amount of NFTs.
*
* @param _amount The number of NFTs to lazy mint.
* @param _baseURIForTokens The placeholder base URI for the 'n' number of NFTs being lazy minted, where the
* metadata for each of those NFTs is `${baseURIForTokens}/${tokenId}`.
* @param _data The encrypted base URI + provenance hash for the batch of NFTs being lazy minted.
* @return batchId A unique integer identifier for the batch of NFTs lazy minted together.
*/
function lazyMint(
uint256 _amount,
string calldata _baseURIForTokens,
bytes calldata _data
) public override returns (uint256 batchId) {
if (_data.length > 0) {
(bytes memory encryptedURI, bytes32 provenanceHash) = abi.decode(_data, (bytes, bytes32));
if (encryptedURI.length != 0 && provenanceHash != "") {
_setEncryptedData(nextTokenIdToLazyMint + _amount, _data);
}
}
return LazyMint.lazyMint(_amount, _baseURIForTokens, _data);
}
/// @notice The tokenId assigned to the next new NFT to be lazy minted.
function nextTokenIdToMint() public view virtual returns (uint256) {
return nextTokenIdToLazyMint;
}
/// @notice The tokenId assigned to the next new NFT to be claimed.
function nextTokenIdToClaim() public view virtual returns (uint256) {
return _currentIndex;
}
/*///////////////////////////////////////////////////////////////
Delayed reveal logic
//////////////////////////////////////////////////////////////*/
/**
* @notice Lets an authorized address reveal a batch of delayed reveal NFTs.
*
* @param _index The ID for the batch of delayed-reveal NFTs to reveal.
* @param _key The key with which the base URI for the relevant batch of NFTs was encrypted.
*/
function reveal(uint256 _index, bytes calldata _key) public virtual override returns (string memory revealedURI) {
require(_canReveal(), "Not authorized");
uint256 batchId = getBatchIdAtIndex(_index);
revealedURI = getRevealURI(batchId, _key);
_setEncryptedData(batchId, "");
_setBaseURI(batchId, revealedURI);
emit TokenURIRevealed(_index, revealedURI);
}
/*//////////////////////////////////////////////////////////////
Minting/burning logic
//////////////////////////////////////////////////////////////*/
/**
* @notice Lets an owner or approved operator burn the NFT of the given tokenId.
* @dev ERC721A's `_burn(uint256,bool)` internally checks for token approvals.
*
* @param _tokenId The tokenId of the NFT to burn.
*/
function burn(uint256 _tokenId) external virtual {
_burn(_tokenId, true);
}
/*///////////////////////////////////////////////////////////////
Internal functions
//////////////////////////////////////////////////////////////*/
/// @dev Runs before every `claim` function call.
function _beforeClaim(
address,
uint256 _quantity,
address,
uint256,
AllowlistProof calldata,
bytes memory
) internal view virtual override {
require(msg.sender == tx.origin, "BOT");
if (_currentIndex + _quantity > nextTokenIdToLazyMint) {
revert("Not enough minted tokens");
}
}
/// @dev Collects and distributes the primary sale value of NFTs being claimed.
function _collectPriceOnClaim(
address _primarySaleRecipient,
uint256 _quantityToClaim,
address _currency,
uint256 _pricePerToken
) internal virtual override {
if (_pricePerToken == 0) {
return;
}
uint256 totalPrice = _quantityToClaim * _pricePerToken;
if (_currency == CurrencyTransferLib.NATIVE_TOKEN) {
if (msg.value != totalPrice) {
revert("Must send total price");
}
}
address saleRecipient = _primarySaleRecipient == address(0) ? primarySaleRecipient() : _primarySaleRecipient;
CurrencyTransferLib.transferCurrency(_currency, msg.sender, saleRecipient, totalPrice);
}
/// @dev Transfers the NFTs being claimed.
function _transferTokensOnClaim(address _to, uint256 _quantityBeingClaimed)
internal
virtual
override
returns (uint256 startTokenId)
{
startTokenId = _currentIndex;
_safeMint(_to, _quantityBeingClaimed);
}
/// @dev Checks whether primary sale recipient can be set in the given execution context.
function _canSetPrimarySaleRecipient() internal view virtual override returns (bool) {
return msg.sender == owner();
}
/// @dev Checks whether owner can be set in the given execution context.
function _canSetOwner() internal view virtual override returns (bool) {
return msg.sender == owner();
}
/// @dev Checks whether royalty info can be set in the given execution context.
function _canSetRoyaltyInfo() internal view virtual override returns (bool) {
return msg.sender == owner();
}
/// @dev Checks whether contract metadata can be set in the given execution context.
function _canSetContractURI() internal view virtual override returns (bool) {
return msg.sender == owner();
}
/// @dev Checks whether platform fee info can be set in the given execution context.
function _canSetClaimConditions() internal view virtual override returns (bool) {
return msg.sender == owner();
}
/// @dev Returns whether lazy minting can be done in the given execution context.
function _canLazyMint() internal view virtual override returns (bool) {
return msg.sender == owner();
}
/// @dev Checks whether NFTs can be revealed in the given execution context.
function _canReveal() internal view virtual returns (bool) {
return msg.sender == owner();
}
/*///////////////////////////////////////////////////////////////
Miscellaneous
//////////////////////////////////////////////////////////////*/
function _dropMsgSender() internal view virtual override returns (address) {
return msg.sender;
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "../../lib/TWBitMaps.sol";
/**
* Thirdweb's 'Drop' contracts are distribution mechanisms for tokens.
*
* A contract admin (i.e. a holder of `DEFAULT_ADMIN_ROLE`) can set a series of claim conditions,
* ordered by their respective `startTimestamp`. A claim condition defines criteria under which
* accounts can mint tokens. Claim conditions can be overwritten or added to by the contract admin.
* At any moment, there is only one active claim condition.
*/
interface IClaimCondition {
/**
* @notice The criteria that make up a claim condition.
*
* @param startTimestamp The unix timestamp after which the claim condition applies.
* The same claim condition applies until the `startTimestamp`
* of the next claim condition.
*
* @param maxClaimableSupply The maximum total number of tokens that can be claimed under
* the claim condition.
*
* @param supplyClaimed At any given point, the number of tokens that have been claimed
* under the claim condition.
*
* @param quantityLimitPerTransaction The maximum number of tokens that can be claimed in a single
* transaction.
*
* @param waitTimeInSecondsBetweenClaims The least number of seconds an account must wait after claiming
* tokens, to be able to claim tokens again.
*
* @param merkleRoot The allowlist of addresses that can claim tokens under the claim
* condition.
*
* @param pricePerToken The price required to pay per token claimed.
*
* @param currency The currency in which the `pricePerToken` must be paid.
*/
struct ClaimCondition {
uint256 startTimestamp;
uint256 maxClaimableSupply;
uint256 supplyClaimed;
uint256 quantityLimitPerTransaction;
uint256 waitTimeInSecondsBetweenClaims;
bytes32 merkleRoot;
uint256 pricePerToken;
address currency;
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "../../lib/TWBitMaps.sol";
import "./IClaimCondition.sol";
/**
* Thirdweb's 'Drop' contracts are distribution mechanisms for tokens.
*
* A contract admin (i.e. a holder of `DEFAULT_ADMIN_ROLE`) can set a series of claim conditions,
* ordered by their respective `startTimestamp`. A claim condition defines criteria under which
* accounts can mint tokens. Claim conditions can be overwritten or added to by the contract admin.
* At any moment, there is only one active claim condition.
*/
interface IClaimConditionMultiPhase is IClaimCondition {
/**
* @notice The set of all claim conditions, at any given moment.
* Claim Phase ID = [currentStartId, currentStartId + length - 1];
*
* @param currentStartId The uid for the first claim condition amongst the current set of
* claim conditions. The uid for each next claim condition is one
* more than the previous claim condition's uid.
*
* @param count The total number of phases / claim conditions in the list
* of claim conditions.
*
* @param conditions The claim conditions at a given uid. Claim conditions
* are ordered in an ascending order by their `startTimestamp`.
*
* @param lastClaimTimestamp Map from an account and uid for a claim condition, to the last timestamp
* at which the account claimed tokens under that claim condition.
*
* @param usedAllowlistSpot Map from a claim condition uid to whether an address in an allowlist
* has already claimed tokens i.e. used their place in the allowlist.
*/
struct ClaimConditionList {
uint256 currentStartId;
uint256 count;
mapping(uint256 => ClaimCondition) conditions;
mapping(uint256 => mapping(address => uint256)) lastClaimTimestamp;
mapping(uint256 => TWBitMaps.BitMap) usedAllowlistSpot;
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/**
* Thirdweb's `ContractMetadata` is a contract extension for any base contracts. It lets you set a metadata URI
* for you contract.
*
* Additionally, `ContractMetadata` is necessary for NFT contracts that want royalties to get distributed on OpenSea.
*/
interface IContractMetadata {
/// @dev Returns the metadata URI of the contract.
function contractURI() external view returns (string memory);
/**
* @dev Sets contract URI for the storefront-level metadata of the contract.
* Only module admin can call this function.
*/
function setContractURI(string calldata _uri) external;
/// @dev Emitted when the contract URI is updated.
event ContractURIUpdated(string prevURI, string newURI);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/**
* Thirdweb's `DelayedReveal` is a contract extension for base NFT contracts. It lets you create batches of
* 'delayed-reveal' NFTs. You can learn more about the usage of delayed reveal NFTs here - https://blog.thirdweb.com/delayed-reveal-nfts
*/
interface IDelayedReveal {
/// @dev Emitted when tokens are revealed.
event TokenURIRevealed(uint256 indexed index, string revealedURI);
/**
* @notice Reveals a batch of delayed reveal NFTs.
*
* @param identifier The ID for the batch of delayed-reveal NFTs to reveal.
*
* @param key The key with which the base URI for the relevant batch of NFTs was encrypted.
*/
function reveal(uint256 identifier, bytes calldata key) external returns (string memory revealedURI);
/**
* @notice Performs XOR encryption/decryption.
*
* @param data The data to encrypt. In the case of delayed-reveal NFTs, this is the "revealed" state
* base URI of the relevant batch of NFTs.
*
* @param key The key with which to encrypt data
*/
function encryptDecrypt(bytes memory data, bytes calldata key) external pure returns (bytes memory result);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "./IClaimConditionMultiPhase.sol";
interface IDrop is IClaimConditionMultiPhase {
struct AllowlistProof {
bytes32[] proof;
uint256 maxQuantityInAllowlist;
}
/// @dev Emitted when an unauthorized caller tries to set claim conditions.
error Drop__NotAuthorized();
/// @notice Emitted when given currency or price is invalid.
error Drop__InvalidCurrencyOrPrice(
address givenCurrency,
address requiredCurrency,
uint256 givenPricePerToken,
uint256 requiredPricePerToken
);
/// @notice Emitted when claiming invalid quantity of tokens.
error Drop__InvalidQuantity();
/// @notice Emitted when claiming given quantity will exceed max claimable supply.
error Drop__ExceedMaxClaimableSupply(uint256 supplyClaimed, uint256 maxClaimableSupply);
/// @notice Emitted when the current timestamp is invalid for claim.
error Drop__CannotClaimYet(
uint256 blockTimestamp,
uint256 startTimestamp,
uint256 lastClaimedAt,
uint256 nextValidClaimTimestamp
);
/// @notice Emitted when given allowlist proof is invalid.
error Drop__NotInWhitelist();
/// @notice Emitted when allowlist spot is already used.
error Drop__ProofClaimed();
/// @notice Emitted when claiming more than allowed quantity in allowlist.
error Drop__InvalidQuantityProof(uint256 maxQuantityInAllowlist);
/// @notice Emitted when max claimable supply in given condition is less than supply claimed already.
error Drop__MaxSupplyClaimedAlready(uint256 supplyClaimedAlready);
/// @dev Emitted when tokens are claimed via `claim`.
event TokensClaimed(
uint256 indexed claimConditionIndex,
address indexed claimer,
address indexed receiver,
uint256 startTokenId,
uint256 quantityClaimed
);
/// @dev Emitted when the contract's claim conditions are updated.
event ClaimConditionsUpdated(ClaimCondition[] claimConditions, bool resetEligibility);
/**
* @notice Lets an account claim a given quantity of NFTs.
*
* @param receiver The receiver of the NFTs to claim.
* @param quantity The quantity of NFTs to claim.
* @param currency The currency in which to pay for the claim.
* @param pricePerToken The price per token to pay for the claim.
* @param allowlistProof The proof of the claimer's inclusion in the merkle root allowlist
* of the claim conditions that apply.
* @param data Arbitrary bytes data that can be leveraged in the implementation of this interface.
*/
function claim(
address receiver,
uint256 quantity,
address currency,
uint256 pricePerToken,
AllowlistProof calldata allowlistProof,
bytes memory data
) external payable;
/**
* @notice Lets a contract admin (account with `DEFAULT_ADMIN_ROLE`) set claim conditions.
*
* @param phases Claim conditions in ascending order by `startTimestamp`.
*
* @param resetClaimEligibility Whether to reset `limitLastClaimTimestamp` and `limitMerkleProofClaim` values when setting new
* claim conditions.
*
*/
function setClaimConditions(ClaimCondition[] calldata phases, bool resetClaimEligibility) external;
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "./IClaimCondition.sol";
interface IDropSinglePhase is IClaimCondition {
struct AllowlistProof {
bytes32[] proof;
uint256 maxQuantityInAllowlist;
}
/// @dev Emitted when tokens are claimed via `claim`.
event TokensClaimed(
address indexed claimer,
address indexed receiver,
uint256 indexed startTokenId,
uint256 quantityClaimed
);
/// @dev Emitted when the contract's claim conditions are updated.
event ClaimConditionUpdated(ClaimCondition condition, bool resetEligibility);
/**
* @notice Lets an account claim a given quantity of NFTs.
*
* @param receiver The receiver of the NFTs to claim.
* @param quantity The quantity of NFTs to claim.
* @param currency The currency in which to pay for the claim.
* @param pricePerToken The price per token to pay for the claim.
* @param allowlistProof The proof of the claimer's inclusion in the merkle root allowlist
* of the claim conditions that apply.
* @param data Arbitrary bytes data that can be leveraged in the implementation of this interface.
*/
function claim(
address receiver,
uint256 quantity,
address currency,
uint256 pricePerToken,
AllowlistProof calldata allowlistProof,
bytes memory data
) external payable;
/**
* @notice Lets a contract admin (account with `DEFAULT_ADMIN_ROLE`) set claim conditions.
*
* @param phase Claim condition to set.
*
* @param resetClaimEligibility Whether to reset `limitLastClaimTimestamp` and `limitMerkleProofClaim` values when setting new
* claim conditions.
*/
function setClaimConditions(ClaimCondition calldata phase, bool resetClaimEligibility) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* [EIP](https://eips.ethereum.org/EIPS/eip-165).
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address who) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
function transfer(address to, uint256 value) external returns (bool);
function approve(address spender, uint256 value) external returns (bool);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: Apache 2.0
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Interface for the NFT Royalty Standard.
*
* A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
* support for royalty payments across all NFT marketplaces and ecosystem participants.
*
* _Available since v4.5._
*/
interface IERC2981 is IERC165 {
/**
* @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
* exchange. The royalty amount is denominated and should be payed in that same unit of exchange.
*/
function royaltyInfo(uint256 tokenId, uint256 salePrice)
external
view
returns (address receiver, uint256 royaltyAmount);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import "./IERC721.sol";
import "./IERC721Metadata.sol";
/**
* @dev Interface of an ERC721A compliant contract.
*/
interface IERC721A is IERC721, IERC721Metadata {
/**
* The caller must own the token or be an approved operator.
*/
error ApprovalCallerNotOwnerNorApproved();
/**
* The token does not exist.
*/
error ApprovalQueryForNonexistentToken();
/**
* The caller cannot approve to their own address.
*/
error ApproveToCaller();
/**
* The caller cannot approve to the current owner.
*/
error ApprovalToCurrentOwner();
/**
* Cannot query the balance for the zero address.
*/
error BalanceQueryForZeroAddress();
/**
* Cannot mint to the zero address.
*/
error MintToZeroAddress();
/**
* The quantity of tokens minted must be more than zero.
*/
error MintZeroQuantity();
/**
* The token does not exist.
*/
error OwnerQueryForNonexistentToken();
/**
* The caller must own the token or be an approved operator.
*/
error TransferCallerNotOwnerNorApproved();
/**
* The token must be owned by `from`.
*/
error TransferFromIncorrectOwner();
/**
* Cannot safely transfer to a contract that does not implement the ERC721Receiver interface.
*/
error TransferToNonERC721ReceiverImplementer();
/**
* Cannot transfer to the zero address.
*/
error TransferToZeroAddress();
/**
* The token does not exist.
*/
error URIQueryForNonexistentToken();
// Compiler will pack this into a single 256bit word.
struct TokenOwnership {
// The address of the owner.
address addr;
// Keeps track of the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
}
// Compiler will pack this into a single 256bit word.
struct AddressData {
// Realistically, 2**64-1 is more than enough.
uint64 balance;
// Keeps track of mint count with minimal overhead for tokenomics.
uint64 numberMinted;
// Keeps track of burn count with minimal overhead for tokenomics.
uint64 numberBurned;
// For miscellaneous variable(s) pertaining to the address
// (e.g. number of whitelist mint slots used).
// If there are multiple variables, please pack them into a uint64.
uint64 aux;
}
/**
* @dev Returns the total amount of tokens stored by the contract.
*
* Burned tokens are calculated here, use `_totalMinted()` if you want to count just minted tokens.
*/
function totalSupply() external view returns (uint256);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
/// @dev See https://eips.ethereum.org/EIPS/eip-721
/// Note: the ERC-165 identifier for this interface is 0x780e9d63.
/* is ERC721 */
interface IERC721Enumerable {
/// @notice Enumerate valid NFTs
/// @dev Throws if `_index` >= `totalSupply()`.
/// @param _index A counter less than `totalSupply()`
/// @return The token identifier for the `_index`th NFT,
/// (sort order not specified)
function tokenByIndex(uint256 _index) external view returns (uint256);
/// @notice Enumerate NFTs assigned to an owner
/// @dev Throws if `_index` >= `balanceOf(_owner)` or if
/// `_owner` is the zero address, representing invalid NFTs.
/// @param _owner An address where we are interested in NFTs owned by them
/// @param _index A counter less than `balanceOf(_owner)`
/// @return The token identifier for the `_index`th NFT assigned to `_owner`,
/// (sort order not specified)
function tokenOfOwnerByIndex(address _owner, uint256 _index) external view returns (uint256);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @title ERC-721 Non-Fungible Token Standard, optional metadata extension
/// @dev See https://eips.ethereum.org/EIPS/eip-721
/// Note: the ERC-165 identifier for this interface is 0x5b5e139f.
/* is ERC721 */
interface IERC721Metadata {
/// @notice A descriptive name for a collection of NFTs in this contract
function name() external view returns (string memory);
/// @notice An abbreviated name for NFTs in this contract
function symbol() external view returns (string memory);
/// @notice A distinct Uniform Resource Identifier (URI) for a given asset.
/// @dev Throws if `_tokenId` is not a valid NFT. URIs are defined in RFC
/// 3986. The URI may point to a JSON file that conforms to the "ERC721
/// Metadata JSON Schema".
function tokenURI(uint256 _tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/**
* Thirdweb's `LazyMint` is a contract extension for any base NFT contract. It lets you 'lazy mint' any number of NFTs
* at once. Here, 'lazy mint' means defining the metadata for particular tokenIds of your NFT contract, without actually
* minting a non-zero balance of NFTs of those tokenIds.
*/
interface ILazyMint {
/// @dev Emitted when tokens are lazy minted.
event TokensLazyMinted(uint256 indexed startTokenId, uint256 endTokenId, string baseURI, bytes encryptedBaseURI);
/**
* @notice Lazy mints a given amount of NFTs.
*
* @param amount The number of NFTs to lazy mint.
*
* @param baseURIForTokens The base URI for the 'n' number of NFTs being lazy minted, where the metadata for each
* of those NFTs is `${baseURIForTokens}/${tokenId}`.
*
* @param extraData Additional bytes data to be used at the discretion of the consumer of the contract.
*
* @return batchId A unique integer identifier for the batch of NFTs lazy minted together.
*/
function lazyMint(
uint256 amount,
string calldata baseURIForTokens,
bytes calldata extraData
) external returns (uint256 batchId);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Multicall.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides a function to batch together multiple calls in a single external call.
*
* _Available since v4.1._
*/
interface IMulticall {
/**
* @dev Receives and executes a batch of function calls on this contract.
*/
function multicall(bytes[] calldata data) external returns (bytes[] memory results);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/**
* Thirdweb's `Ownable` is a contract extension to be used with any base contract. It exposes functions for setting and reading
* who the 'owner' of the inheriting smart contract is, and lets the inheriting contract perform conditional logic that uses
* information about who the contract's owner is.
*/
interface IOwnable {
/// @dev Returns the owner of the contract.
function owner() external view returns (address);
/// @dev Lets a module admin set a new owner for the contract. The new owner must be a module admin.
function setOwner(address _newOwner) external;
/// @dev Emitted when a new Owner is set.
event OwnerUpdated(address indexed prevOwner, address indexed newOwner);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IPermissions {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "./IPermissions.sol";
/**
* @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
*/
interface IPermissionsEnumerable is IPermissions {
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* [forum post](https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296)
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) external view returns (address);
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) external view returns (uint256);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/**
* Thirdweb's `Primary` is a contract extension to be used with any base contract. It exposes functions for setting and reading
* the recipient of primary sales, and lets the inheriting contract perform conditional logic that uses information about
* primary sales, if desired.
*/
interface IPrimarySale {
/// @dev The adress that receives all primary sales value.
function primarySaleRecipient() external view returns (address);
/// @dev Lets a module admin set the default recipient of all primary sales.
function setPrimarySaleRecipient(address _saleRecipient) external;
/// @dev Emitted when a new sale recipient is set.
event PrimarySaleRecipientUpdated(address indexed recipient);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "../../eip/interface/IERC2981.sol";
/**
* Thirdweb's `Royalty` is a contract extension to be used with any base contract. It exposes functions for setting and reading
* the recipient of royalty fee and the royalty fee basis points, and lets the inheriting contract perform conditional logic
* that uses information about royalty fees, if desired.
*
* The `Royalty` contract is ERC2981 compliant.
*/
interface IRoyalty is IERC2981 {
struct RoyaltyInfo {
address recipient;
uint256 bps;
}
/// @dev Returns the royalty recipient and fee bps.
function getDefaultRoyaltyInfo() external view returns (address, uint16);
/// @dev Lets a module admin update the royalty bps and recipient.
function setDefaultRoyaltyInfo(address _royaltyRecipient, uint256 _royaltyBps) external;
/// @dev Lets a module admin set the royalty recipient for a particular token Id.
function setRoyaltyInfoForToken(
uint256 tokenId,
address recipient,
uint256 bps
) external;
/// @dev Returns the royalty recipient for a particular token Id.
function getRoyaltyInfoForToken(uint256 tokenId) external view returns (address, uint16);
/// @dev Emitted when royalty info is updated.
event DefaultRoyalty(address indexed newRoyaltyRecipient, uint256 newRoyaltyBps);
/// @dev Emitted when royalty recipient for tokenId is set
event RoyaltyForToken(uint256 indexed tokenId, address indexed royaltyRecipient, uint256 royaltyBps);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
interface IWETH {
function deposit() external payable;
function withdraw(uint256 amount) external;
function transfer(address to, uint256 value) external returns (bool);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "./interface/ILazyMint.sol";
import "./BatchMintMetadata.sol";
/**
* The `LazyMint` is a contract extension for any base NFT contract. It lets you 'lazy mint' any number of NFTs
* at once. Here, 'lazy mint' means defining the metadata for particular tokenIds of your NFT contract, without actually
* minting a non-zero balance of NFTs of those tokenIds.
*/
abstract contract LazyMint is ILazyMint, BatchMintMetadata {
/// @notice The tokenId assigned to the next new NFT to be lazy minted.
uint256 internal nextTokenIdToLazyMint;
/**
* @notice Lets an authorized address lazy mint a given amount of NFTs.
*
* @param _amount The number of NFTs to lazy mint.
* @param _baseURIForTokens The base URI for the 'n' number of NFTs being lazy minted, where the metadata for each
* of those NFTs is `${baseURIForTokens}/${tokenId}`.
* @param _data Additional bytes data to be used at the discretion of the consumer of the contract.
* @return batchId A unique integer identifier for the batch of NFTs lazy minted together.
*/
function lazyMint(
uint256 _amount,
string calldata _baseURIForTokens,
bytes calldata _data
) public virtual override returns (uint256 batchId) {
if (!_canLazyMint()) {
revert("Not authorized");
}
if (_amount == 0) {
revert("Minting 0 tokens");
}
uint256 startId = nextTokenIdToLazyMint;
(nextTokenIdToLazyMint, batchId) = _batchMintMetadata(startId, _amount, _baseURIForTokens);
emit TokensLazyMinted(startId, startId + _amount - 1, _baseURIForTokens, _data);
return batchId;
}
/// @dev Returns whether lazy minting can be performed in the given execution context.
function _canLazyMint() internal view virtual returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.11;
import "@thirdweb-dev/contracts/base/ERC721Drop.sol";
import "@thirdweb-dev/contracts/eip/interface/IERC721Enumerable.sol";
import "@thirdweb-dev/contracts/extension/Drop.sol";
contract LiquidCollections is IERC721Enumerable, ERC721Drop {
constructor(
string memory _name,
string memory _symbol,
address _royaltyRecipient,
uint128 _royaltyBps,
address _primarySaleRecipient
)
ERC721Drop(
_name,
_symbol,
_royaltyRecipient,
_royaltyBps,
_primarySaleRecipient
)
{}
// // copy-pasted from DropSinglePhase.sol
// function canClaim(
// address _receiver,
// uint256 _quantity,
// address _currency,
// uint256 _pricePerToken,
// AllowlistProof calldata _allowlistProof,
// bytes memory _data
// ) public view {
// _beforeClaim(
// _receiver,
// _quantity,
// _currency,
// _pricePerToken,
// _allowlistProof,
// _data
// );
// // bytes32 activeConditionId = conditionId;
// /**
// * We make allowlist checks (i.e. verifyClaimMerkleProof) before verifying the claim's general
// * validity (i.e. verifyClaim) because we give precedence to the check of allow list quantity
// * restriction over the check of the general claim condition's quantityLimitPerTransaction
// * restriction.
// */
// // Verify inclusion in allowlist.
// (
// bool validMerkleProof,
// uint256 merkleProofIndex
// ) = verifyClaimMerkleProof(
// _dropMsgSender(),
// _quantity,
// _allowlistProof
// );
// // Verify claim validity. If not valid, revert.
// // when there's allowlist present --> verifyClaimMerkleProof will verify the maxQuantityInAllowlist value with hashed leaf in the allowlist
// // when there's no allowlist, this check is true --> verifyClaim will check for _quantity being equal/less than the limit
// bool toVerifyMaxQuantityPerTransaction = _allowlistProof
// .maxQuantityInAllowlist ==
// 0 ||
// claimCondition.merkleRoot == bytes32(0);
// verifyClaim(
// _dropMsgSender(),
// _quantity,
// _currency,
// _pricePerToken,
// toVerifyMaxQuantityPerTransaction
// );
// }
/////////////////////
// redemption
/////////////////////
mapping(uint256 => bool) private redeemed;
event Redeem(address indexed from, uint256 indexed tokenId);
function isRedeemable(uint256 tokenId) public view virtual returns (bool) {
require(_exists(tokenId), "LiquidCollections: Token does not exist");
return !redeemed[tokenId];
}
function redeem(uint256 tokenId) public virtual {
require(_exists(tokenId), "LiquidCollections: Token does not exist");
require(
ownerOf(tokenId) == msg.sender,
"LiquidCollections: You are not the owner of this token"
);
require(
redeemed[tokenId] == false,
"LiquidCollections: NFT is aleady redeemed"
);
redeemed[tokenId] = true;
emit Redeem(msg.sender, tokenId);
}
struct Redeemey {
uint256 id;
string tokenURI;
bool redeemed;
}
function getMineWithMetadata(address _owner)
public
view
returns (Redeemey[] memory)
{
// address _owner = msg.sender;
uint256 lngth = ERC721A.balanceOf(_owner);
Redeemey[] memory _metadatasOfOwners = new Redeemey[](lngth);
uint256 i;
for (i = 0; i < lngth; i++) {
uint256 tUid = tokenOfOwnerByIndex(_owner, i);
_metadatasOfOwners[i] = Redeemey({
id: tUid,
redeemed: redeemed[tUid],
tokenURI: tokenURI(tUid)
});
}
return (_metadatasOfOwners);
}
/////////////////////
// enumerability
/////////////////////
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
public
view
virtual
override
returns (uint256)
{
require(
index < ERC721A.balanceOf(owner),
"ERC721Enumerable: owner index out of bounds"
);
return _ownedTokens[owner][index];
}
// /**
// * @dev See {IERC721Enumerable-totalSupply}.
// */
// function totalSupply() public view virtual override returns (uint256) {
// return _allTokens.length;
// }
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index)
public
view
virtual
override
returns (uint256)
{
require(
index < ERC721A.totalSupply(),
"ERC721Enumerable: global index out of bounds"
);
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and 'to' cannot be the zero address at the same time.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 tokenId,
uint256 quantity
) internal virtual override {
// super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
// /**
// * @dev Hook that is called before any batch token transfer. For now this is limited
// * to batch minting by the {ERC721Consecutive} extension.
// *
// * Calling conditions:
// *
// * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
// * transferred to `to`.
// * - When `from` is zero, `tokenId` will be minted for `to`.
// * - When `to` is zero, ``from``'s `tokenId` will be burned.
// * - `from` cannot be the zero address.
// * - `to` cannot be the zero address.
// *
// * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
// */
// function _beforeConsecutiveTokenTransfer(
// address,
// address,
// uint256,
// uint96
// ) internal virtual override {
// revert("ERC721Enumerable: consecutive transfers not supported");
// }
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721A.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId)
private
{
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721A.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
// Modified from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v4.3.0/contracts/utils/cryptography/MerkleProof.sol
// Copied from https://github.com/ensdomains/governance/blob/master/contracts/MerkleProof.sol
pragma solidity ^0.8.0;
/**
* @dev These functions deal with verification of Merkle Trees proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*
* Source: https://github.com/ensdomains/governance/blob/master/contracts/MerkleProof.sol
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool, uint256) {
bytes32 computedHash = leaf;
uint256 index = 0;
for (uint256 i = 0; i < proof.length; i++) {
index *= 2;
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
} else {
// Hash(current element of the proof + current computed hash)
computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
index += 1;
}
}
// Check if the computed hash (root) is equal to the provided root
return (computedHash == root, index);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Multicall.sol)
pragma solidity ^0.8.0;
import "../lib/TWAddress.sol";
import "./interface/IMulticall.sol";
/**
* @dev Provides a function to batch together multiple calls in a single external call.
*
* _Available since v4.1._
*/
contract Multicall is IMulticall {
/**
* @notice Receives and executes a batch of function calls on this contract.
* @dev Receives and executes a batch of function calls on this contract.
*
* @param data The bytes data that makes up the batch of function calls to execute.
* @return results The bytes data that makes up the result of the batch of function calls executed.
*/
function multicall(bytes[] calldata data) external virtual override returns (bytes[] memory results) {
results = new bytes[](data.length);
for (uint256 i = 0; i < data.length; i++) {
results[i] = TWAddress.functionDelegateCall(address(this), data[i]);
}
return results;
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "./interface/IOwnable.sol";
/**
* @title Ownable
* @notice Thirdweb's `Ownable` is a contract extension to be used with any base contract. It exposes functions for setting and reading
* who the 'owner' of the inheriting smart contract is, and lets the inheriting contract perform conditional logic that uses
* information about who the contract's owner is.
*/
abstract contract Ownable is IOwnable {
/// @dev Owner of the contract (purpose: OpenSea compatibility)
address private _owner;
/// @dev Reverts if caller is not the owner.
modifier onlyOwner() {
if (msg.sender != _owner) {
revert("Not authorized");
}
_;
}
/**
* @notice Returns the owner of the contract.
*/
function owner() public view override returns (address) {
return _owner;
}
/**
* @notice Lets an authorized wallet set a new owner for the contract.
* @param _newOwner The address to set as the new owner of the contract.
*/
function setOwner(address _newOwner) external override {
if (!_canSetOwner()) {
revert("Not authorized");
}
_setupOwner(_newOwner);
}
/// @dev Lets a contract admin set a new owner for the contract. The new owner must be a contract admin.
function _setupOwner(address _newOwner) internal {
address _prevOwner = _owner;
_owner = _newOwner;
emit OwnerUpdated(_prevOwner, _newOwner);
}
/// @dev Returns whether owner can be set in the given execution context.
function _canSetOwner() internal view virtual returns (bool);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "./interface/IPermissions.sol";
import "../lib/TWStrings.sol";
/**
* @title Permissions
* @dev This contracts provides extending-contracts with role-based access control mechanisms
*/
contract Permissions is IPermissions {
/// @dev Map from keccak256 hash of a role => a map from address => whether address has role.
mapping(bytes32 => mapping(address => bool)) private _hasRole;
/// @dev Map from keccak256 hash of a role to role admin. See {getRoleAdmin}.
mapping(bytes32 => bytes32) private _getRoleAdmin;
/// @dev Default admin role for all roles. Only accounts with this role can grant/revoke other roles.
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/// @dev Modifier that checks if an account has the specified role; reverts otherwise.
modifier onlyRole(bytes32 role) {
_checkRole(role, msg.sender);
_;
}
/**
* @notice Checks whether an account has a particular role.
* @dev Returns `true` if `account` has been granted `role`.
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
* @param account Address of the account for which the role is being checked.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _hasRole[role][account];
}
/**
* @notice Checks whether an account has a particular role;
* role restrictions can be swtiched on and off.
*
* @dev Returns `true` if `account` has been granted `role`.
* Role restrictions can be swtiched on and off:
* - If address(0) has ROLE, then the ROLE restrictions
* don't apply.
* - If address(0) does not have ROLE, then the ROLE
* restrictions will apply.
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
* @param account Address of the account for which the role is being checked.
*/
function hasRoleWithSwitch(bytes32 role, address account) public view returns (bool) {
if (!_hasRole[role][address(0)]) {
return _hasRole[role][account];
}
return true;
}
/**
* @notice Returns the admin role that controls the specified role.
* @dev See {grantRole} and {revokeRole}.
* To change a role's admin, use {_setRoleAdmin}.
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
*/
function getRoleAdmin(bytes32 role) external view override returns (bytes32) {
return _getRoleAdmin[role];
}
/**
* @notice Grants a role to an account, if not previously granted.
* @dev Caller must have admin role for the `role`.
* Emits {RoleGranted Event}.
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
* @param account Address of the account to which the role is being granted.
*/
function grantRole(bytes32 role, address account) public virtual override {
_checkRole(_getRoleAdmin[role], msg.sender);
if (_hasRole[role][account]) {
revert("Can only grant to non holders");
}
_setupRole(role, account);
}
/**
* @notice Revokes role from an account.
* @dev Caller must have admin role for the `role`.
* Emits {RoleRevoked Event}.
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
* @param account Address of the account from which the role is being revoked.
*/
function revokeRole(bytes32 role, address account) public virtual override {
_checkRole(_getRoleAdmin[role], msg.sender);
_revokeRole(role, account);
}
/**
* @notice Revokes role from the account.
* @dev Caller must have the `role`, with caller being the same as `account`.
* Emits {RoleRevoked Event}.
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
* @param account Address of the account from which the role is being revoked.
*/
function renounceRole(bytes32 role, address account) public virtual override {
if (msg.sender != account) {
revert("Can only renounce for self");
}
_revokeRole(role, account);
}
/// @dev Sets `adminRole` as `role`'s admin role.
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = _getRoleAdmin[role];
_getRoleAdmin[role] = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
/// @dev Sets up `role` for `account`
function _setupRole(bytes32 role, address account) internal virtual {
_hasRole[role][account] = true;
emit RoleGranted(role, account, msg.sender);
}
/// @dev Revokes `role` from `account`
function _revokeRole(bytes32 role, address account) internal virtual {
_checkRole(role, account);
delete _hasRole[role][account];
emit RoleRevoked(role, account, msg.sender);
}
/// @dev Checks `role` for `account`. Reverts with a message including the required role.
function _checkRole(bytes32 role, address account) internal view virtual {
if (!_hasRole[role][account]) {
revert(
string(
abi.encodePacked(
"Permissions: account ",
TWStrings.toHexString(uint160(account), 20),
" is missing role ",
TWStrings.toHexString(uint256(role), 32)
)
)
);
}
}
/// @dev Checks `role` for `account`. Reverts with a message including the required role.
function _checkRoleWithSwitch(bytes32 role, address account) internal view virtual {
if (!hasRoleWithSwitch(role, account)) {
revert(
string(
abi.encodePacked(
"Permissions: account ",
TWStrings.toHexString(uint160(account), 20),
" is missing role ",
TWStrings.toHexString(uint256(role), 32)
)
)
);
}
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "./interface/IPermissionsEnumerable.sol";
import "./Permissions.sol";
/**
* @title PermissionsEnumerable
* @dev This contracts provides extending-contracts with role-based access control mechanisms.
* Also provides interfaces to view all members with a given role, and total count of members.
*/
contract PermissionsEnumerable is IPermissionsEnumerable, Permissions {
/**
* @notice A data structure to store data of members for a given role.
*
* @param index Current index in the list of accounts that have a role.
* @param members map from index => address of account that has a role
* @param indexOf map from address => index which the account has.
*/
struct RoleMembers {
uint256 index;
mapping(uint256 => address) members;
mapping(address => uint256) indexOf;
}
/// @dev map from keccak256 hash of a role to its members' data. See {RoleMembers}.
mapping(bytes32 => RoleMembers) private roleMembers;
/**
* @notice Returns the role-member from a list of members for a role,
* at a given index.
* @dev Returns `member` who has `role`, at `index` of role-members list.
* See struct {RoleMembers}, and mapping {roleMembers}
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
* @param index Index in list of current members for the role.
*
* @return member Address of account that has `role`
*/
function getRoleMember(bytes32 role, uint256 index) external view override returns (address member) {
uint256 currentIndex = roleMembers[role].index;
uint256 check;
for (uint256 i = 0; i < currentIndex; i += 1) {
if (roleMembers[role].members[i] != address(0)) {
if (check == index) {
member = roleMembers[role].members[i];
return member;
}
check += 1;
} else if (hasRole(role, address(0)) && i == roleMembers[role].indexOf[address(0)]) {
check += 1;
}
}
}
/**
* @notice Returns total number of accounts that have a role.
* @dev Returns `count` of accounts that have `role`.
* See struct {RoleMembers}, and mapping {roleMembers}
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
*
* @return count Total number of accounts that have `role`
*/
function getRoleMemberCount(bytes32 role) external view override returns (uint256 count) {
uint256 currentIndex = roleMembers[role].index;
for (uint256 i = 0; i < currentIndex; i += 1) {
if (roleMembers[role].members[i] != address(0)) {
count += 1;
}
}
if (hasRole(role, address(0))) {
count += 1;
}
}
/// @dev Revokes `role` from `account`, and removes `account` from {roleMembers}
/// See {_removeMember}
function _revokeRole(bytes32 role, address account) internal override {
super._revokeRole(role, account);
_removeMember(role, account);
}
/// @dev Grants `role` to `account`, and adds `account` to {roleMembers}
/// See {_addMember}
function _setupRole(bytes32 role, address account) internal override {
super._setupRole(role, account);
_addMember(role, account);
}
/// @dev adds `account` to {roleMembers}, for `role`
function _addMember(bytes32 role, address account) internal {
uint256 idx = roleMembers[role].index;
roleMembers[role].index += 1;
roleMembers[role].members[idx] = account;
roleMembers[role].indexOf[account] = idx;
}
/// @dev removes `account` from {roleMembers}, for `role`
function _removeMember(bytes32 role, address account) internal {
uint256 idx = roleMembers[role].indexOf[account];
delete roleMembers[role].members[idx];
delete roleMembers[role].indexOf[account];
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "./interface/IPrimarySale.sol";
/**
* @title Primary Sale
* @notice Thirdweb's `PrimarySale` is a contract extension to be used with any base contract. It exposes functions for setting and reading
* the recipient of primary sales, and lets the inheriting contract perform conditional logic that uses information about
* primary sales, if desired.
*/
abstract contract PrimarySale is IPrimarySale {
/// @dev The address that receives all primary sales value.
address private recipient;
/// @dev Returns primary sale recipient address.
function primarySaleRecipient() public view override returns (address) {
return recipient;
}
/**
* @notice Updates primary sale recipient.
* @dev Caller should be authorized to set primary sales info.
* See {_canSetPrimarySaleRecipient}.
* Emits {PrimarySaleRecipientUpdated Event}; See {_setupPrimarySaleRecipient}.
*
* @param _saleRecipient Address to be set as new recipient of primary sales.
*/
function setPrimarySaleRecipient(address _saleRecipient) external override {
if (!_canSetPrimarySaleRecipient()) {
revert("Not authorized");
}
_setupPrimarySaleRecipient(_saleRecipient);
}
/// @dev Lets a contract admin set the recipient for all primary sales.
function _setupPrimarySaleRecipient(address _saleRecipient) internal {
recipient = _saleRecipient;
emit PrimarySaleRecipientUpdated(_saleRecipient);
}
/// @dev Returns whether primary sale recipient can be set in the given execution context.
function _canSetPrimarySaleRecipient() internal view virtual returns (bool);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "./interface/IRoyalty.sol";
/**
* @title Royalty
* @notice Thirdweb's `Royalty` is a contract extension to be used with any base contract. It exposes functions for setting and reading
* the recipient of royalty fee and the royalty fee basis points, and lets the inheriting contract perform conditional logic
* that uses information about royalty fees, if desired.
*
* @dev The `Royalty` contract is ERC2981 compliant.
*/
abstract contract Royalty is IRoyalty {
/// @dev The (default) address that receives all royalty value.
address private royaltyRecipient;
/// @dev The (default) % of a sale to take as royalty (in basis points).
uint16 private royaltyBps;
/// @dev Token ID => royalty recipient and bps for token
mapping(uint256 => RoyaltyInfo) private royaltyInfoForToken;
/**
* @notice View royalty info for a given token and sale price.
* @dev Returns royalty amount and recipient for `tokenId` and `salePrice`.
* @param tokenId The tokenID of the NFT for which to query royalty info.
* @param salePrice Sale price of the token.
*
* @return receiver Address of royalty recipient account.
* @return royaltyAmount Royalty amount calculated at current royaltyBps value.
*/
function royaltyInfo(uint256 tokenId, uint256 salePrice)
external
view
virtual
override
returns (address receiver, uint256 royaltyAmount)
{
(address recipient, uint256 bps) = getRoyaltyInfoForToken(tokenId);
receiver = recipient;
royaltyAmount = (salePrice * bps) / 10_000;
}
/**
* @notice View royalty info for a given token.
* @dev Returns royalty recipient and bps for `_tokenId`.
* @param _tokenId The tokenID of the NFT for which to query royalty info.
*/
function getRoyaltyInfoForToken(uint256 _tokenId) public view override returns (address, uint16) {
RoyaltyInfo memory royaltyForToken = royaltyInfoForToken[_tokenId];
return
royaltyForToken.recipient == address(0)
? (royaltyRecipient, uint16(royaltyBps))
: (royaltyForToken.recipient, uint16(royaltyForToken.bps));
}
/**
* @notice Returns the defualt royalty recipient and BPS for this contract's NFTs.
*/
function getDefaultRoyaltyInfo() external view override returns (address, uint16) {
return (royaltyRecipient, uint16(royaltyBps));
}
/**
* @notice Updates default royalty recipient and bps.
* @dev Caller should be authorized to set royalty info.
* See {_canSetRoyaltyInfo}.
* Emits {DefaultRoyalty Event}; See {_setupDefaultRoyaltyInfo}.
*
* @param _royaltyRecipient Address to be set as default royalty recipient.
* @param _royaltyBps Updated royalty bps.
*/
function setDefaultRoyaltyInfo(address _royaltyRecipient, uint256 _royaltyBps) external override {
if (!_canSetRoyaltyInfo()) {
revert("Not authorized");
}
_setupDefaultRoyaltyInfo(_royaltyRecipient, _royaltyBps);
}
/// @dev Lets a contract admin update the default royalty recipient and bps.
function _setupDefaultRoyaltyInfo(address _royaltyRecipient, uint256 _royaltyBps) internal {
if (_royaltyBps > 10_000) {
revert("Exceeds max bps");
}
royaltyRecipient = _royaltyRecipient;
royaltyBps = uint16(_royaltyBps);
emit DefaultRoyalty(_royaltyRecipient, _royaltyBps);
}
/**
* @notice Updates default royalty recipient and bps for a particular token.
* @dev Sets royalty info for `_tokenId`. Caller should be authorized to set royalty info.
* See {_canSetRoyaltyInfo}.
* Emits {RoyaltyForToken Event}; See {_setupRoyaltyInfoForToken}.
*
* @param _recipient Address to be set as royalty recipient for given token Id.
* @param _bps Updated royalty bps for the token Id.
*/
function setRoyaltyInfoForToken(
uint256 _tokenId,
address _recipient,
uint256 _bps
) external override {
if (!_canSetRoyaltyInfo()) {
revert("Not authorized");
}
_setupRoyaltyInfoForToken(_tokenId, _recipient, _bps);
}
/// @dev Lets a contract admin set the royalty recipient and bps for a particular token Id.
function _setupRoyaltyInfoForToken(
uint256 _tokenId,
address _recipient,
uint256 _bps
) internal {
if (_bps > 10_000) {
revert("Exceeds max bps");
}
royaltyInfoForToken[_tokenId] = RoyaltyInfo({ recipient: _recipient, bps: _bps });
emit RoyaltyForToken(_tokenId, _recipient, _bps);
}
/// @dev Returns whether royalty info can be set in the given execution context.
function _canSetRoyaltyInfo() internal view virtual returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../../../../eip/interface/IERC20.sol";
import "../../../../lib/TWAddress.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using TWAddress for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library TWAddress {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* [EIP1884](https://eips.ethereum.org/EIPS/eip-1884) increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/structs/BitMaps.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for managing uint256 to bool mapping in a compact and efficient way, providing the keys are sequential.
* Largely inspired by Uniswap's [merkle-distributor](https://github.com/Uniswap/merkle-distributor/blob/master/contracts/MerkleDistributor.sol).
*/
library TWBitMaps {
struct BitMap {
mapping(uint256 => uint256) _data;
}
/**
* @dev Returns whether the bit at `index` is set.
*/
function get(BitMap storage bitmap, uint256 index) internal view returns (bool) {
uint256 bucket = index >> 8;
uint256 mask = 1 << (index & 0xff);
return bitmap._data[bucket] & mask != 0;
}
/**
* @dev Sets the bit at `index` to the boolean `value`.
*/
function setTo(
BitMap storage bitmap,
uint256 index,
bool value
) internal {
if (value) {
set(bitmap, index);
} else {
unset(bitmap, index);
}
}
/**
* @dev Sets the bit at `index`.
*/
function set(BitMap storage bitmap, uint256 index) internal {
uint256 bucket = index >> 8;
uint256 mask = 1 << (index & 0xff);
bitmap._data[bucket] |= mask;
}
/**
* @dev Unsets the bit at `index`.
*/
function unset(BitMap storage bitmap, uint256 index) internal {
uint256 bucket = index >> 8;
uint256 mask = 1 << (index & 0xff);
bitmap._data[bucket] &= ~mask;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library TWStrings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
{
"compilationTarget": {
"contracts/LiquidCollections.sol": "LiquidCollections"
},
"evmVersion": "london",
"libraries": {},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": true,
"runs": 200
},
"remappings": []
}
[{"inputs":[{"internalType":"string","name":"_name","type":"string"},{"internalType":"string","name":"_symbol","type":"string"},{"internalType":"address","name":"_royaltyRecipient","type":"address"},{"internalType":"uint128","name":"_royaltyBps","type":"uint128"},{"internalType":"address","name":"_primarySaleRecipient","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"ApprovalCallerNotOwnerNorApproved","type":"error"},{"inputs":[],"name":"ApprovalQueryForNonexistentToken","type":"error"},{"inputs":[],"name":"ApprovalToCurrentOwner","type":"error"},{"inputs":[],"name":"ApproveToCaller","type":"error"},{"inputs":[],"name":"BalanceQueryForZeroAddress","type":"error"},{"inputs":[],"name":"MintToZeroAddress","type":"error"},{"inputs":[],"name":"MintZeroQuantity","type":"error"},{"inputs":[],"name":"OwnerQueryForNonexistentToken","type":"error"},{"inputs":[],"name":"TransferCallerNotOwnerNorApproved","type":"error"},{"inputs":[],"name":"TransferFromIncorrectOwner","type":"error"},{"inputs":[],"name":"TransferToNonERC721ReceiverImplementer","type":"error"},{"inputs":[],"name":"TransferToZeroAddress","type":"error"},{"inputs":[],"name":"URIQueryForNonexistentToken","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"approved","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"components":[{"internalType":"uint256","name":"startTimestamp","type":"uint256"},{"internalType":"uint256","name":"maxClaimableSupply","type":"uint256"},{"internalType":"uint256","name":"supplyClaimed","type":"uint256"},{"internalType":"uint256","name":"quantityLimitPerTransaction","type":"uint256"},{"internalType":"uint256","name":"waitTimeInSecondsBetweenClaims","type":"uint256"},{"internalType":"bytes32","name":"merkleRoot","type":"bytes32"},{"internalType":"uint256","name":"pricePerToken","type":"uint256"},{"internalType":"address","name":"currency","type":"address"}],"indexed":false,"internalType":"struct IClaimCondition.ClaimCondition","name":"condition","type":"tuple"},{"indexed":false,"internalType":"bool","name":"resetEligibility","type":"bool"}],"name":"ClaimConditionUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"string","name":"prevURI","type":"string"},{"indexed":false,"internalType":"string","name":"newURI","type":"string"}],"name":"ContractURIUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"newRoyaltyRecipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"newRoyaltyBps","type":"uint256"}],"name":"DefaultRoyalty","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"prevOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnerUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"recipient","type":"address"}],"name":"PrimarySaleRecipientUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Redeem","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"},{"indexed":true,"internalType":"address","name":"royaltyRecipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"royaltyBps","type":"uint256"}],"name":"RoyaltyForToken","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"index","type":"uint256"},{"indexed":false,"internalType":"string","name":"revealedURI","type":"string"}],"name":"TokenURIRevealed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"claimer","type":"address"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":true,"internalType":"uint256","name":"startTokenId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"quantityClaimed","type":"uint256"}],"name":"TokensClaimed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"startTokenId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"endTokenId","type":"uint256"},{"indexed":false,"internalType":"string","name":"baseURI","type":"string"},{"indexed":false,"internalType":"bytes","name":"encryptedBaseURI","type":"bytes"}],"name":"TokensLazyMinted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_receiver","type":"address"},{"internalType":"uint256","name":"_quantity","type":"uint256"},{"internalType":"address","name":"_currency","type":"address"},{"internalType":"uint256","name":"_pricePerToken","type":"uint256"},{"components":[{"internalType":"bytes32[]","name":"proof","type":"bytes32[]"},{"internalType":"uint256","name":"maxQuantityInAllowlist","type":"uint256"}],"internalType":"struct IDropSinglePhase.AllowlistProof","name":"_allowlistProof","type":"tuple"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"claim","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"claimCondition","outputs":[{"internalType":"uint256","name":"startTimestamp","type":"uint256"},{"internalType":"uint256","name":"maxClaimableSupply","type":"uint256"},{"internalType":"uint256","name":"supplyClaimed","type":"uint256"},{"internalType":"uint256","name":"quantityLimitPerTransaction","type":"uint256"},{"internalType":"uint256","name":"waitTimeInSecondsBetweenClaims","type":"uint256"},{"internalType":"bytes32","name":"merkleRoot","type":"bytes32"},{"internalType":"uint256","name":"pricePerToken","type":"uint256"},{"internalType":"address","name":"currency","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"contractURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes","name":"data","type":"bytes"},{"internalType":"bytes","name":"key","type":"bytes"}],"name":"encryptDecrypt","outputs":[{"internalType":"bytes","name":"result","type":"bytes"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"encryptedData","outputs":[{"internalType":"bytes","name":"","type":"bytes"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getBaseURICount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_index","type":"uint256"}],"name":"getBatchIdAtIndex","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_claimer","type":"address"}],"name":"getClaimTimestamp","outputs":[{"internalType":"uint256","name":"lastClaimedAt","type":"uint256"},{"internalType":"uint256","name":"nextValidClaimTimestamp","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getDefaultRoyaltyInfo","outputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"name":"getMineWithMetadata","outputs":[{"components":[{"internalType":"uint256","name":"id","type":"uint256"},{"internalType":"string","name":"tokenURI","type":"string"},{"internalType":"bool","name":"redeemed","type":"bool"}],"internalType":"struct LiquidCollections.Redeemey[]","name":"","type":"tuple[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_batchId","type":"uint256"},{"internalType":"bytes","name":"_key","type":"bytes"}],"name":"getRevealURI","outputs":[{"internalType":"string","name":"revealedURI","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"}],"name":"getRoyaltyInfoForToken","outputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_batchId","type":"uint256"}],"name":"isEncryptedBatch","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"isRedeemable","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"string","name":"_baseURIForTokens","type":"string"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"lazyMint","outputs":[{"internalType":"uint256","name":"batchId","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes[]","name":"data","type":"bytes[]"}],"name":"multicall","outputs":[{"internalType":"bytes[]","name":"results","type":"bytes[]"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"nextTokenIdToClaim","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"nextTokenIdToMint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"primarySaleRecipient","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"redeem","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_index","type":"uint256"},{"internalType":"bytes","name":"_key","type":"bytes"}],"name":"reveal","outputs":[{"internalType":"string","name":"revealedURI","type":"string"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"uint256","name":"salePrice","type":"uint256"}],"name":"royaltyInfo","outputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"royaltyAmount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint256","name":"startTimestamp","type":"uint256"},{"internalType":"uint256","name":"maxClaimableSupply","type":"uint256"},{"internalType":"uint256","name":"supplyClaimed","type":"uint256"},{"internalType":"uint256","name":"quantityLimitPerTransaction","type":"uint256"},{"internalType":"uint256","name":"waitTimeInSecondsBetweenClaims","type":"uint256"},{"internalType":"bytes32","name":"merkleRoot","type":"bytes32"},{"internalType":"uint256","name":"pricePerToken","type":"uint256"},{"internalType":"address","name":"currency","type":"address"}],"internalType":"struct IClaimCondition.ClaimCondition","name":"_condition","type":"tuple"},{"internalType":"bool","name":"_resetClaimEligibility","type":"bool"}],"name":"setClaimConditions","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"_uri","type":"string"}],"name":"setContractURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_royaltyRecipient","type":"address"},{"internalType":"uint256","name":"_royaltyBps","type":"uint256"}],"name":"setDefaultRoyaltyInfo","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_newOwner","type":"address"}],"name":"setOwner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_saleRecipient","type":"address"}],"name":"setPrimarySaleRecipient","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"},{"internalType":"address","name":"_recipient","type":"address"},{"internalType":"uint256","name":"_bps","type":"uint256"}],"name":"setRoyaltyInfoForToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"index","type":"uint256"}],"name":"tokenByIndex","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"uint256","name":"index","type":"uint256"}],"name":"tokenOfOwnerByIndex","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_claimer","type":"address"},{"internalType":"uint256","name":"_quantity","type":"uint256"},{"internalType":"address","name":"_currency","type":"address"},{"internalType":"uint256","name":"_pricePerToken","type":"uint256"},{"internalType":"bool","name":"verifyMaxQuantityPerTransaction","type":"bool"}],"name":"verifyClaim","outputs":[],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_claimer","type":"address"},{"internalType":"uint256","name":"_quantity","type":"uint256"},{"components":[{"internalType":"bytes32[]","name":"proof","type":"bytes32[]"},{"internalType":"uint256","name":"maxQuantityInAllowlist","type":"uint256"}],"internalType":"struct IDropSinglePhase.AllowlistProof","name":"_allowlistProof","type":"tuple"}],"name":"verifyClaimMerkleProof","outputs":[{"internalType":"bool","name":"validMerkleProof","type":"bool"},{"internalType":"uint256","name":"merkleProofIndex","type":"uint256"}],"stateMutability":"view","type":"function"}]