// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol


// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// File: @openzeppelin/contracts/utils/Context.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;


/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;





/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// File: monero.sol

pragma solidity ^0.8.20;



/**

CharlesMansonAlexJonesBeetlejuice1776Pitbull(karen)
telegram: t.me/schrotzo
website: tickermonero.gay
twitter: https://twitter.com/monerogay
NFT: https://opensea.io/collection/schrotzo-gremlins

:~7?7??7!77?7!7??7!7???7??????7777?777!!77!77~77!!777!!!?JJ!7??JYYYJ????JJJJJJJJJ?????????????777!7?7777777!777????????77~
:!5Y?~7?YJ?YJ?7!YJ?Y5JYJY!7J55?J?Y??~7?7JYYY?!^J7?YY5?J7!?JY5PPPGPPPG555PP5555PPP55PPGPPPPPPPPPPPPPP5555YJ5PP5Y55PPPPGGGPJ
:!5Y^..~YYJY??:.:??Y5JY?^..!55?JJ5~..:7?YYYY~. .^?Y557J^..7Y55GPPPGGP5P55555Y555PPPPPPPPPPP5PPPPPGPPPPPPPPGGGGP55555PPPGG?
:!557J?!JJ^?!??Y?7?J!!JJJYJ?55!:?57??7J??~JJ!^J7!7J~?!J7Y?YJ5?~~!!77!!!77???77777!!!77?????77??777?????7??J77777777????J?~
:!55JYJ?7...^JY5P?7^..!J555JY!..:YJ5YYJ!..:??7YY!7:..^Y555Y?5?.                                                          .
:!YY!!???!Y?7?J!J?J?Y7??Y~7?5?!J7Y??!?J??J?Y?!~7!7~J?7YY!7J75J~~~~~~~^^~~~~~~~~~~~~~^^^^::::.....:::::::^^::::::.::~~~~~^^
:!Y~ .:7J55YJ!:..^YY5JY7:  !55?YYY!..:JJ5Y5Y~...~?!5Y7J:..^75PGGGP5PGGGP5PPPGGGGPPPPGPPGPPPPPPPPPPPPP55PPPP555Y5PPPPPPGGG?
:!J!!Y!7JJ~JJ!!J7~JY!7J?!J7?55!?JY?7??YJ?~JJ!7J7!?!!7!Y!????55PP55YY5PPPPP55GPP55PPPPGGPPGPPPPPPPPPPP55555PP55PPPGPP5PGPP7
:!JY?5J7~. ^?755Y7?^.:7J5YYYY! .:J55Y5Y!...7YJJ5?7.  ^Y?YY5?5555P5Y5PPPPGPGGPPPPGGGPPGGGPGP55555PPGGPP5JJYPPPPGGGGGGPPPPP?
:!JY7!??!?77Y7J~?!J??!JJ5!?J5?777YY7~JYY7Y!?J7^JJY~?!!Y!~~Y?5?^^^^:^~^~~^^^^^^^^^~~~~~~~~~~~~~~~~~^^~~^^^^^^^^^~~^^^^^:::^
:!J7..^?7575Y^. :!J5YJ5J~ .~55YYYY7. :Y555JY!...J57557J...!J5!.                                                          .
:!YJ7J7J77:JJ~7J?7JJ~7Y57?775Y!?JJY7?7Y5?~!J?7!7J5!!Y?5!7?JJ57^:^!7!~~^~~~^^~!77!!~^~~~~~~~~~!~~~^^^^^~^::::^~~~^^^~~~~~~^
:!55J5JJ~  :J7YJ5J7. .?5Y55YY^ .^J55YYY7. .?5J7Y5J: :?5??J5?YYPPPGGGGGGPPP55PPGGGGPPPP555P55PGGGGPPPPPPGGPPPPGPPPGGGGGG5P5
:!55!7JY77!?Y!?^JJ?!J?JYJ7?JY!7?!J5J!JYY!7~YY?^J5Y~?!J5?^757YYPGPPP55YYYYY555PGGGGPPPP5P5555PGGPPPPP5PPGGGPPPP5555PPPPPPP5
:!Y!..~JY57YY~. :7?JY5YJ^ .~YYYYJ?7. :J5JYJ5J: :YY?JY5J^ .^!YJ?JJJJYJJJJYYJJJ?JJJ777777??JJJJJJYYY555YJYYYJJJJJJJYYYY5555J
:~5Y~?75YY~JJ~~!?J7?^?J5!?77YJ?~J??7?!YY7!?YY!7?YY7~7Y5~!!!7YJ:                                  .....           .    ....
:~55?5Y5?: :?J?!YY~...7YJYYJJ^. ^?5PJ5Y7..^YYJ?P5J^..75J?JY?5J:...............::......            ....  ..::..           .
:~557!Y5?~~!JY7^?J~~Y??Y?~7JY~J!~?5J~JYJ!J7YY?~Y5Y!!JJ5J!7JJ5555555555YJJYY5555YY5P5P5YYYJJ???77??YYYYJJ5555YJ?JJYJJ?JYY5J
:~5!..^YJY75Y!. :7!?YYYJ:  ^Y?5JJ?7. :?5JYY57: :?Y??YJ?~ .~J55GGGPP5PGGGGGPGGGPPGGGPPPGGGGGPPPPPPGGPPPPPGGPPPPPGGGGGPPGGPY
:~P7!?75?Y?55J!!??7?YYYJ^7!~Y?5?JJ77?7J5JYJ5?~?7JJ?JY?Y?7??J55PP5P555PP55P5555PPPPP5PPGP5PPPGGPPGGPGGGGGGPPPPPGGPGGGGGG5YJ
:~?77???!!!777!!7!~77!7!~!777?7777??????7?7?7!???7~7?77!777!77JJJJ?JYYYJYYJJ??JJJYJJYYYYYYY5YYYYYYJYYYJJ???JJYYYYYYYJJJJJ7
::.                                                           ..........                                                 :
::        .       .....:::.....                                                                .....              .......:
:!?JJJJJJJJJJJJJJY5YJJYJ??JYY5YY55YYYYYYJJJJ???J?77???JJJJJJ??????JJJJJJJJJJ???JJJJYJJ?????JJJYYYJJJJJ?JJJJYJJJJJYYY555Y?7
:!5PGGGPP5YYY5PGGGGGGGPPPPPPPPPGGGPPPPPPPGGGGGGGPPPPGGGGGGPPPPPPPGGGGGGPPPPPP5PPPPP55PPGGGGGGPPPPPPPPPPPPPPPPPPPPPPPGGPP57
:^YP5PPGGPP5YY5GGGGGP55P5555PPP555555PPP5PPPPPPGPPP5555PPPPPPPPGGGP5PPPPPPPGGPPGGGGP5PPPPPPPPP55555PP55PPPGGGPPPPPPPPPPP5!
:^^!!!!7?77??77!!!7?????777777!!~~^^^~~~~!!~~~~~~~~~~~~~^^^^^^^^^^^^^^~~~~~~~!!!!!!!!!^:::^^^^^^^^^^~~~~~!!!!77?7777!!!!~~
::                                                                                                                       .
::.............. .::::::::::::.............                         ......       .......  ..........       .......::::::..
:!JY555YYYYYYY5555P5YYYYY55PPPPPPPPP55555YYYJ?JYYJJJJJJJJYYJJ?????????7777???77???JYYYYJJJYYY5555YYJJJJJYY555YYYY555PPPYJ7
:!5PGGGGGGPPPPGPPPPPPPPPPPP5Y5555555Y5PPPPPPGP55PGGGGGGGGPPPP55PPPPGGGGGPP555555555555555PPP55YJYPPPPGGGGGGGGPPPPPPPPPP557
^~Y5555PPPPPPPPPPGGP555PP55YY5P5YJ??JYYY555555555PPGGGPPPPPGGPPPPPP5P5PPPPPPGPGPGGPPP5555555PP555PPPPPPPGGGGGPPPPPPP555P5!
^^^^~^^~!!!!!!~~^^^~~~~~^^^^^^^~~^::!!!!777!!!~~~~~~~~~~~~~~!~^^~~~~~!!!~~~~~~~~!!!!!!~~~~~~!!!!!~~~!!!!!~~~~!!!!!!!^^~~^^
::.                                                                                                                      :
:::::..:::^^::::.:^^^^^^~~^^^^^^^^:::::::.....::::........  .........................:::::::::::::::.. ....::::::^^^^^^^.:
^J5PPPP555YYYY5PPPGP555555PPPPPPPPPPPPP55555YY555555P5YYYY5555YYYYYYYYYYY555555555PPPPPPPPPPPPPPP555YYY555PPP55PPPPPPPPPJ7
:~5PPGPPP55555PGPPPPPGPPPGGPPPGGGPP55Y5555555555PPPPGGGGGGGGGP5555PPPPPPPPPGGGGPPP5555555555PPPPGPPPPPPPPPPPPPPP555PPPPPP7
^:J555555YYY5555PPP5YYPP5555P555555555PPPPPPPPPPP5555555Y55YYYYYYY55555PPPPPP555555555555555PPPPP55P5555PPPPP5555555P55P57
::~!~~~~~~~~~~~^^^^^^^!!!!!!!!~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^~~~~~~~~~~~~~~~~~~~~~~~~~^^^~~~~~~~~~~~~!!~^

*/
contract CustomToken is ERC20 {
    address public owner;
    address public taxAddress; // Address where taxes will be sent
    mapping(address => bool) public blacklist;
    mapping(address => bool) public antiWhaleWhitelist;
    uint256 public taxPercentage;
    uint256 public whaleLimit; // Will be set to 1% of total supply in the constructor
    address public uniswapPair; // Address of the Uniswap pair for this token
    bool public whaleLimitActive = true; // Flag to check if whale limit is active

constructor() ERC20("CharlesMansonAlexJonesBeetlejuice1776Pitbull(karen)", "MONERO") {
    owner = msg.sender;
    // Mint the specified total supply
    _mint(msg.sender, 177642069 * 10**18); // 177,642,069 tokens with 18 decimals
    whaleLimit = totalSupply() / 100; // Set whaleLimit to 1% of total supply
    // Set initial values for taxPercentage
}

    modifier onlyOwner() {
        require(msg.sender == owner, "Not the contract owner");
        _;
    }

    function renounceOwnership() external onlyOwner {
        owner = address(0);
    }

    function setTaxAddress(address _taxAddress) external onlyOwner {
        taxAddress = _taxAddress;
    }

    function setUniswapPair(address _pair) external onlyOwner {
        uniswapPair = _pair;
    }

    function addToBlacklist(address _address) external onlyOwner {
        blacklist[_address] = true;
    }

    function removeFromBlacklist(address _address) external onlyOwner {
        blacklist[_address] = false;
    }

    function addToWhitelist(address _address) external onlyOwner {
        antiWhaleWhitelist[_address] = true;
    }

    function removeFromWhitelist(address _address) external onlyOwner {
        antiWhaleWhitelist[_address] = false;
    }

    function setWhaleLimit(uint256 _limit) external onlyOwner {
        whaleLimit = _limit;
    }

    function setTaxPercentage(uint256 _percentage) external onlyOwner {
        taxPercentage = _percentage;
    }

    function turnOffWhaleLimit() external onlyOwner {
        whaleLimit = totalSupply();
        whaleLimitActive = false;
    }

    function transfer(address recipient, uint256 amount) public override returns (bool) {
        require(!blacklist[msg.sender], "You are blacklisted");
        if (whaleLimitActive) {
            require(balanceOf(recipient) + amount <= whaleLimit || antiWhaleWhitelist[recipient], "Recipient would exceed the whale limit");
        }

        uint256 tax = 0;
        if ((msg.sender == uniswapPair || recipient == uniswapPair) && !antiWhaleWhitelist[msg.sender] && !antiWhaleWhitelist[recipient]) {
            // Apply tax only if the transfer involves the Uniswap pair and neither the sender nor recipient is whitelisted
            tax = (amount * taxPercentage) / 100;
            super.transfer(taxAddress, tax); // Send tax to the specified tax address
        }

        super.transfer(recipient, amount - tax);
        return true;
    }

    // YOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
}

{
  "compilationTarget": {
    "CustomToken.sol": "CustomToken"
  },
  "evmVersion": "shanghai",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}