BitStone

pragma solidity >=0.4.22 <0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, "SafeMath: division by zero");
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "SafeMath: modulo by zero");
        return a % b;
    }
}

contract owned {
    address public owner;

    constructor() public {
        owner = msg.sender;
    }

    modifier onlyOwner {
        require(msg.sender == owner);
        _;
    }

    function transferOwnership(address newOwner) onlyOwner public {
        owner = newOwner;
    }
}

interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes calldata _extraData) external; }

contract TokenERC20 {
    using SafeMath for uint256;

    // Public variables of the token
    string public name;
    string public symbol;
    uint8 public decimals = 18;
    // 18 decimals is the strongly suggested default, avoid changing it
    uint256 public totalSupply;

    // This creates an array with all balances
    mapping (address => uint256) public balanceOf;
    mapping (address => mapping (address => uint256)) public allowance;

    // This generates a public event on the blockchain that will notify clients
    event Transfer(address indexed from, address indexed to, uint256 value);

    // This generates a public event on the blockchain that will notify clients
    event Approval(address indexed _owner, address indexed _spender, uint256 _value);

    // This notifies clients about the amount burnt
    event Burn(address indexed from, uint256 value);

    /**
     * Constrctor function
     *
     * Initializes contract with initial supply tokens to the creator of the contract
     */
    constructor(
        uint256 initialSupply,
        string memory tokenName,
        string memory tokenSymbol
    ) public {
        totalSupply = initialSupply * 10 ** uint256(decimals);  // Update total supply with the decimal amount
        balanceOf[msg.sender] = totalSupply;                    // Give the creator all initial tokens
        name = tokenName;                                       // Set the name for display purposes
        symbol = tokenSymbol;                                   // Set the symbol for display purposes
    }

    /**
     * Internal transfer, only can be called by this contract
     */
    function _transfer(address _from, address _to, uint _value) internal {
        // Prevent transfer to 0x0 address. Use burn() instead
        require(_to != address(0x0));
        // Check if the sender has enough
        require(balanceOf[_from] >= _value);
        // Check for overflows
        require(balanceOf[_to] + _value > balanceOf[_to]);
        // Save this for an assertion in the future
        uint previousBalances = balanceOf[_from] + balanceOf[_to];
        // Subtract from the sender
        balanceOf[_from] = balanceOf[_from].sub(_value);
        // Add the same to the recipient
        balanceOf[_to] = balanceOf[_to].add(_value);
        emit Transfer(_from, _to, _value);
        // Asserts are used to use static analysis to find bugs in your code. They should never fail
        assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
    }

    /**
     * Transfer tokens
     *
     * Send `_value` tokens to `_to` from your account
     *
     * @param _to The address of the recipient
     * @param _value the amount to send
     */
    function transfer(address _to, uint256 _value) public returns (bool success) {
        _transfer(msg.sender, _to, _value);
        return true;
    }

    /**
     * Transfer tokens from other address
     *
     * Send `_value` tokens to `_to` in behalf of `_from`
     *
     * @param _from The address of the sender
     * @param _to The address of the recipient
     * @param _value the amount to send
     */
    function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
        require(_value <= allowance[_from][msg.sender]);     // Check allowance
        allowance[_from][msg.sender] = allowance[_from][msg.sender].sub(_value);
        _transfer(_from, _to, _value);
        return true;
    }

    /**
     * Set allowance for other address
     *
     * Allows `_spender` to spend no more than `_value` tokens in your behalf
     *
     * @param _spender The address authorized to spend
     * @param _value the max amount they can spend
     */
    function approve(address _spender, uint256 _value) public
        returns (bool success) {
        allowance[msg.sender][_spender] = _value;
        emit Approval(msg.sender, _spender, _value);
        return true;
    }

    /**
     * Set allowance for other address and notify
     *
     * Allows `_spender` to spend no more than `_value` tokens in your behalf, and then ping the contract about it
     *
     * @param _spender The address authorized to spend
     * @param _value the max amount they can spend
     * @param _extraData some extra information to send to the approved contract
     */
    function approveAndCall(address _spender, uint256 _value, bytes memory _extraData)
        public
        returns (bool success) {
        tokenRecipient spender = tokenRecipient(_spender);
        if (approve(_spender, _value)) {
            spender.receiveApproval(msg.sender, _value, address(this), _extraData);
            return true;
        }
    }

    /**
     * Destroy tokens
     *
     * Remove `_value` tokens from the system irreversibly
     *
     * @param _value the amount of money to burn
     */
    function burn(uint256 _value) public returns (bool success) {
        require(balanceOf[msg.sender] >= _value);   // Check if the sender has enough
        balanceOf[msg.sender] = balanceOf[msg.sender].sub(_value);            // Subtract from the sender
        totalSupply = totalSupply.sub(_value);                      // Updates totalSupply
        emit Burn(msg.sender, _value);
        return true;
    }

    /**
     * Destroy tokens from other account
     *
     * Remove `_value` tokens from the system irreversibly on behalf of `_from`.
     *
     * @param _from the address of the sender
     * @param _value the amount of money to burn
     */
    function burnFrom(address _from, uint256 _value) public returns (bool success) {
        require(balanceOf[_from] >= _value);                // Check if the targeted balance is enough
        require(_value <= allowance[_from][msg.sender]);    // Check allowance
        balanceOf[_from] = balanceOf[_from].sub(_value);                         // Subtract from the targeted balance
        allowance[_from][msg.sender] = allowance[_from][msg.sender].sub(_value);             // Subtract from the sender's allowance
        totalSupply = totalSupply.sub(_value);
        emit Burn(_from, _value);
        return true;
    }
}

/******************************************/
/*       ADVANCED TOKEN STARTS HERE       */
/******************************************/

contract ERC20ext is owned, TokenERC20 {
    using SafeMath for uint256;
    
    mapping (address => bool) public frozenAccount;
    mapping (address => uint256) public lockedAccount;
    mapping (address => uint256) public lockedAmount;

    /* This generates a public event on the blockchain that will notify clients */
    event FrozenFunds(address target, bool frozen);

    /* Initializes contract with initial supply tokens to the creator of the contract */
    constructor(
        uint256 initialSupply,
        string memory tokenName,
        string memory tokenSymbol
    ) TokenERC20(initialSupply, tokenName, tokenSymbol) public {}

    /* Internal transfer, only can be called by this contract */
    function _transfer(address _from, address _to, uint _value) internal {
        require ((block.timestamp > lockedAccount[_from]) || lockedAmount[_from] + _value < balanceOf[_from]);
        require (_to != address(0x0));                          // Prevent transfer to 0x0 address. Use burn() instead
        require (balanceOf[_from] >= _value);                   // Check if the sender has enough
        require (balanceOf[_to] + _value >= balanceOf[_to]);    // Check for overflows
        require(!frozenAccount[_from]);                         // Check if sender is frozen
        require(!frozenAccount[_to]);                           // Check if recipient is frozen
        balanceOf[_from] = balanceOf[_from].sub(_value);
        balanceOf[_to] = balanceOf[_to].add(_value); // Add the same to the recipient
        emit Transfer(_from, _to, _value);
    }

    /// @notice `freeze? Prevent | Allow` `target` from sending & receiving tokens
    /// @param target Address to be frozen
    /// @param freeze either to freeze it or not
    function freezeAccount(address target, bool freeze) onlyOwner public returns (bool success){
        frozenAccount[target] = freeze;
        emit FrozenFunds(target, freeze);
        return true;
    }

    function lock(address target, uint256 time, uint256 amount) onlyOwner public returns (bool success){
        lockedAccount[target] = time;
        lockedAmount[target] = amount;
        return true;
    }
}

{
  "compilationTarget": {
    "ERC20ext.sol": "ERC20ext"
  },
  "evmVersion": "byzantium",
  "libraries": {},
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}