// SPDX-License-Identifier: MITpragmasolidity 0.8.9;/**
* @dev Collection of functions related to the address type
*/libraryAddress{
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/functionisContract(address account) internalviewreturns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0// for contracts in construction, since the code is only stored at the end// of the constructor execution.return account.code.length>0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/functionsendValue(addresspayable recipient, uint256 amount) internal{
require(address(this).balance>= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/functionfunctionCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target,
bytesmemory data,
uint256 value
) internalreturns (bytesmemory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/functionfunctionCallWithValue(address target,
bytesmemory data,
uint256 value,
stringmemory errorMessage
) internalreturns (bytesmemory) {
require(address(this).balance>= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytesmemory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target, bytesmemory data) internalviewreturns (bytesmemory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/functionfunctionStaticCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalviewreturns (bytesmemory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytesmemory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/functionfunctionDelegateCall(address target, bytesmemory data) internalreturns (bytesmemory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/functionfunctionDelegateCall(address target,
bytesmemory data,
stringmemory errorMessage
) internalreturns (bytesmemory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytesmemory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/functionverifyCallResult(bool success,
bytesmemory returndata,
stringmemory errorMessage
) internalpurereturns (bytesmemory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if presentif (returndata.length>0) {
// The easiest way to bubble the revert reason is using memory via assemblyassembly {
let returndata_size :=mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
Contract Source Code
File 2 of 31: Clones.sol
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;/**
* @dev https://eips.ethereum.org/EIPS/eip-1167[EIP 1167] is a standard for
* deploying minimal proxy contracts, also known as "clones".
*
* > To simply and cheaply clone contract functionality in an immutable way, this standard specifies
* > a minimal bytecode implementation that delegates all calls to a known, fixed address.
*
* The library includes functions to deploy a proxy using either `create` (traditional deployment) or `create2`
* (salted deterministic deployment). It also includes functions to predict the addresses of clones deployed using the
* deterministic method.
*
*/libraryClones{
/**
* @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.
*
* This function uses the create opcode, which should never revert.
*/functionclone(address implementation) internalreturns (address instance) {
assembly {
let ptr :=mload(0x40)
mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
mstore(add(ptr, 0x14), shl(0x60, implementation))
mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
instance :=create(0, ptr, 0x37)
}
require(instance !=address(0), "ERC1167: create failed");
}
/**
* @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.
*
* This function uses the create2 opcode and a `salt` to deterministically deploy
* the clone. Using the same `implementation` and `salt` multiple time will revert, since
* the clones cannot be deployed twice at the same address.
*/functioncloneDeterministic(address implementation, bytes32 salt) internalreturns (address instance) {
assembly {
let ptr :=mload(0x40)
mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
mstore(add(ptr, 0x14), shl(0x60, implementation))
mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
instance :=create2(0, ptr, 0x37, salt)
}
require(instance !=address(0), "ERC1167: create2 failed");
}
/**
* @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
*/functionpredictDeterministicAddress(address implementation,
bytes32 salt,
address deployer
) internalpurereturns (address predicted) {
assembly {
let ptr :=mload(0x40)
mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
mstore(add(ptr, 0x14), shl(0x60, implementation))
mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf3ff00000000000000000000000000000000)
mstore(add(ptr, 0x38), shl(0x60, deployer))
mstore(add(ptr, 0x4c), salt)
mstore(add(ptr, 0x6c), keccak256(ptr, 0x37))
predicted :=keccak256(add(ptr, 0x37), 0x55)
}
}
/**
* @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
*/functionpredictDeterministicAddress(address implementation, bytes32 salt)
internalviewreturns (address predicted)
{
return predictDeterministicAddress(implementation, salt, address(this));
}
}
Contract Source Code
File 3 of 31: Context.sol
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/abstractcontractContext{
function_msgSender() internalviewvirtualreturns (address) {
returnmsg.sender;
}
function_msgData() internalviewvirtualreturns (bytescalldata) {
returnmsg.data;
}
}
Contract Source Code
File 4 of 31: ECDSA.sol
// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/cryptography/ECDSA.sol)pragmasolidity 0.8.9;import"./Strings.sol";
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/libraryECDSA{
enumRecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV
}
function_throwError(RecoverError error) privatepure{
if (error == RecoverError.NoError) {
return; // no error: do nothing
} elseif (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} elseif (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} elseif (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
} elseif (error == RecoverError.InvalidSignatureV) {
revert("ECDSA: invalid signature 'v' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/functiontryRecover(bytes32 hash, bytesmemory signature) internalpurereturns (address, RecoverError) {
// Check the signature length// - case 65: r,s,v signature (standard)// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._if (signature.length==65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them// currently is to use assembly.assembly {
r :=mload(add(signature, 0x20))
s :=mload(add(signature, 0x40))
v :=byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} elseif (signature.length==64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them// currently is to use assembly.assembly {
r :=mload(add(signature, 0x20))
vs :=mload(add(signature, 0x40))
}
return tryRecover(hash, r, vs);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/functionrecover(bytes32 hash, bytesmemory signature) internalpurereturns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/functiontryRecover(bytes32 hash,
bytes32 r,
bytes32 vs
) internalpurereturns (address, RecoverError) {
bytes32 s;
uint8 v;
assembly {
s :=and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
v :=add(shr(255, vs), 27)
}
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/functionrecover(bytes32 hash,
bytes32 r,
bytes32 vs
) internalpurereturns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/functiontryRecover(bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internalpurereturns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most// signatures from current libraries generate a unique signature with an s-value in the lower half order.//// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept// these malleable signatures as well.if (uint256(s) >0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
if (v !=27&& v !=28) {
return (address(0), RecoverError.InvalidSignatureV);
}
// If the signature is valid (and not malleable), return the signer addressaddress signer =ecrecover(hash, v, r, s);
if (signer ==address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/functionrecover(bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internalpurereturns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/functiontoEthSignedMessageHash(bytes32 hash) internalpurereturns (bytes32) {
// 32 is the length in bytes of hash,// enforced by the type signature abovereturnkeccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/functiontoEthSignedMessageHash(bytesmemory s) internalpurereturns (bytes32) {
returnkeccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/functiontoTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internalpurereturns (bytes32) {
returnkeccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
Contract Source Code
File 5 of 31: ERC165.sol
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;import"../interfaces/IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/abstractcontractERC165isIERC165{
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverridereturns (bool) {
return interfaceId ==type(IERC165).interfaceId;
}
}
Contract Source Code
File 6 of 31: ERC721.sol
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;import"./ERC721Errors.sol";
import"../interfaces/IERC721.sol";
import"../interfaces/IERC721Receiver.sol";
import"../interfaces/IERC721Metadata.sol";
import"../interfaces/IERC721Cloneable.sol";
import"../libraries/Address.sol";
import"../libraries/Context.sol";
import"../libraries/Strings.sol";
import"../utils/ERC165.sol";
import"../utils/GenericErrors.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/abstractcontractERC721isContext, ERC165, ERC721Errors, GenericErrors, IERC721Metadata, IERC721Cloneable{
usingAddressforaddress;
usingStringsforuint256;
// Only allow ERC721 to be initialized onceboolinternal initializedERC721;
// Token namestringinternal tokenName;
// Token symbolstringinternal tokenSymbol;
// Base URI For Offchain Metadatastringinternal baseMetadataURI;
// Mapping from token ID to owner addressmapping(uint256=>address) internal owners;
// Mapping owner address to token countmapping(address=>uint256) internal balances;
// Mapping from token ID to approved addressmapping(uint256=>address) internal tokenApprovals;
// Mapping from owner to operator approvalsmapping(address=>mapping(address=>bool)) internal operatorApprovals;
functioninitializeERC721(stringmemory name_, stringmemory symbol_, stringmemory baseURI_) publicoverride{
require(!initializedERC721, ERROR_REINITIALIZATION_NOT_PERMITTED);
tokenName = name_;
tokenSymbol = symbol_;
_setBaseURI(baseURI_);
initializedERC721 =true;
}
/**
* @dev See {IERC165-supportsInterface}.
*/functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverride(ERC165, IERC165) returns (bool) {
return
interfaceId ==type(IERC721).interfaceId||
interfaceId ==type(IERC721Metadata).interfaceId||
interfaceId ==type(IERC721Cloneable).interfaceId||super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/functionbalanceOf(address owner) publicviewvirtualoverridereturns (uint256) {
require(owner !=address(0), ERROR_QUERY_FOR_ZERO_ADDRESS);
return balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/functionownerOf(uint256 tokenId) publicviewvirtualoverridereturns (address) {
address owner = owners[tokenId];
require(owner !=address(0), ERROR_QUERY_FOR_NONEXISTENT_TOKEN);
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/functionname() publicviewvirtualoverridereturns (stringmemory) {
return tokenName;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/functionsymbol() publicviewvirtualoverridereturns (stringmemory) {
return tokenSymbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/functiontokenURI(uint256 tokenId) publicviewvirtualoverridereturns (stringmemory) {
require(_exists(tokenId), ERROR_QUERY_FOR_NONEXISTENT_TOKEN);
stringmemory uriBase = baseURI();
returnbytes(uriBase).length>0 ? string(abi.encodePacked(uriBase, tokenId.toString())) : "";
}
functionbaseURI() publicviewvirtualreturns (stringmemory) {
return baseMetadataURI;
}
/**
* @dev Internal function to set the base URI
*/function_setBaseURI(stringmemory uri) internal{
baseMetadataURI = uri;
}
/**
* @dev See {IERC721-approve}.
*/functionapprove(address to, uint256 tokenId) publicvirtualoverride{
address owner = ownerOf(tokenId);
require(to != owner, ERROR_APPROVAL_TO_CURRENT_OWNER);
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()), ERROR_NOT_OWNER_NOR_APPROVED);
_approve(owner, to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/functiongetApproved(uint256 tokenId) publicviewvirtualoverridereturns (address) {
require(_exists(tokenId), ERROR_QUERY_FOR_NONEXISTENT_TOKEN);
return tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/functionsetApprovalForAll(address operator, bool approved) publicvirtualoverride{
require(operator != _msgSender(), ERROR_APPROVE_TO_CALLER);
operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/functionisApprovedForAll(address owner, address operator) publicviewvirtualoverridereturns (bool) {
return operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/functiontransferFrom(addressfrom, address to, uint256 tokenId) publicvirtualoverride{
(address owner, bool isApprovedOrOwner) = _isApprovedOrOwner(_msgSender(), tokenId);
require(isApprovedOrOwner, ERROR_NOT_OWNER_NOR_APPROVED);
_transfer(owner, from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/functionsafeTransferFrom(addressfrom, address to, uint256 tokenId) publicvirtualoverride{
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/functionsafeTransferFrom(addressfrom, address to, uint256 tokenId, bytesmemory data) publicvirtualoverride{
transferFrom(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, data), ERROR_NOT_AN_ERC721_RECEIVER);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/function_exists(uint256 tokenId) internalviewvirtualreturns (bool) {
return owners[tokenId] !=address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/function_isApprovedOrOwner(address spender, uint256 tokenId) internalviewvirtualreturns (address owner, bool isApprovedOrOwner) {
owner = owners[tokenId];
require(owner !=address(0), ERROR_QUERY_FOR_NONEXISTENT_TOKEN);
isApprovedOrOwner = (spender == owner || tokenApprovals[tokenId] == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/function_burn(uint256 tokenId) internalvirtual{
address owner = ownerOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == owner || tokenApprovals[tokenId] == _msgSender() || isApprovedForAll(owner, _msgSender()));
require(isApprovedOrOwner, ERROR_NOT_OWNER_NOR_APPROVED);
// Clear approvals
_clearApproval(owner, tokenId);
balances[owner] -=1;
_clearOwnership(tokenId);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/function_transfer(address owner, addressfrom, address to, uint256 tokenId) internalvirtual{
require(owner ==from, ERROR_TRANSFER_FROM_INCORRECT_OWNER);
require(to !=address(0), ERROR_TRANSFER_TO_ZERO_ADDRESS);
// Clear approvals from the previous owner
_clearApproval(owner, tokenId);
balances[from] -=1;
balances[to] +=1;
_setOwnership(to, tokenId);
emit Transfer(from, to, tokenId);
}
/**
* @dev Equivalent to approving address(0), but more gas efficient
*
* Emits a {Approval} event.
*/function_clearApproval(address owner, uint256 tokenId) internalvirtual{
delete tokenApprovals[tokenId];
emit Approval(owner, address(0), tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/function_approve(address owner, address to, uint256 tokenId) internalvirtual{
tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
function_clearOwnership(uint256 tokenId) internalvirtual{
delete owners[tokenId];
}
function_setOwnership(address to, uint256 tokenId) internalvirtual{
owners[tokenId] = to;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*
* @dev Slither identifies an issue with unused return value.
* Reference: https://github.com/crytic/slither/wiki/Detector-Documentation#unused-return
* This should be a non-issue. It is the standard OpenZeppelin implementation which has been heavily used and audited.
*/function_checkOnERC721Received(addressfrom,
address to,
uint256 tokenId,
bytesmemory _data
) internalreturns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytesmemory reason) {
if (reason.length==0) {
revert(ERROR_NOT_AN_ERC721_RECEIVER);
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
returntrue;
}
}
}
Contract Source Code
File 7 of 31: ERC721Errors.sol
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;abstractcontractERC721Errors{
stringinternalconstant ERROR_QUERY_FOR_ZERO_ADDRESS ="Query for zero address";
stringinternalconstant ERROR_QUERY_FOR_NONEXISTENT_TOKEN ="Token does not exist";
stringinternalconstant ERROR_APPROVAL_TO_CURRENT_OWNER ="Current owner approval";
stringinternalconstant ERROR_APPROVE_TO_CALLER ="Approve to caller";
stringinternalconstant ERROR_NOT_OWNER_NOR_APPROVED ="Not owner nor approved";
stringinternalconstant ERROR_NOT_AN_ERC721_RECEIVER ="Not an ERC721Receiver";
stringinternalconstant ERROR_TRANSFER_FROM_INCORRECT_OWNER ="Transfer from incorrect owner";
stringinternalconstant ERROR_TRANSFER_TO_ZERO_ADDRESS ="Transfer to zero address";
stringinternalconstant ERROR_ALREADY_MINTED ="Token already minted";
stringinternalconstant ERROR_NO_TOKENS_MINTED ="No tokens minted";
}
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/interfaceIERC165{
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/functionsupportsInterface(bytes4 interfaceId) externalviewreturns (bool);
}
Contract Source Code
File 13 of 31: IERC20.sol
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/interfaceIERC20{
/**
* @dev Returns the amount of tokens in existence.
*/functiontotalSupply() externalviewreturns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/functionbalanceOf(address account) externalviewreturns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/functiontransfer(address recipient, uint256 amount) externalreturns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/functionallowance(address owner, address spender) externalviewreturns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/functionapprove(address spender, uint256 amount) externalreturns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/functiontransferFrom(address sender,
address recipient,
uint256 amount
) externalreturns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/eventTransfer(addressindexedfrom, addressindexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/eventApproval(addressindexed owner, addressindexed spender, uint256 value);
}
Contract Source Code
File 14 of 31: IERC2309.sol
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;/**
* @dev Interface of the ERC2309 standard as defined in the EIP.
*/interfaceIERC2309{
/**
* @dev Emitted when consecutive token ids in range ('fromTokenId') to ('toTokenId') are transferred from one account (`fromAddress`) to
* another (`toAddress`).
*
* Note that `value` may be zero.
*/eventConsecutiveTransfer(uint256indexed fromTokenId, uint256 toTokenId, addressindexed fromAddress, addressindexed toAddress);
}
Contract Source Code
File 15 of 31: IERC2981.sol
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;import"./IERC165.sol";
/**
* @dev Interface for the NFT Royalty Standard.
*
* A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
* support for royalty payments across all NFT marketplaces and ecosystem participants.
*
*/interfaceIERC2981isIERC165{
/**
* @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
* exchange. The royalty amount is denominated and should be payed in that same unit of exchange.
*/functionroyaltyInfo(uint256 tokenId, uint256 salePrice)
externalviewreturns (address receiver, uint256 royaltyAmount);
}
Contract Source Code
File 16 of 31: IERC721.sol
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;import"./IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/interfaceIERC721isIERC165{
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/eventTransfer(addressindexedfrom, addressindexed to, uint256indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/eventApproval(addressindexed owner, addressindexed approved, uint256indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/eventApprovalForAll(addressindexed owner, addressindexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/functionbalanceOf(address owner) externalviewreturns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/functionownerOf(uint256 tokenId) externalviewreturns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/functiontransferFrom(addressfrom,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/functionapprove(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/functiongetApproved(uint256 tokenId) externalviewreturns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/functionsetApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/functionisApprovedForAll(address owner, address operator) externalviewreturns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/functionsafeTransferFrom(addressfrom,
address to,
uint256 tokenId,
bytescalldata data
) external;
}
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/interfaceIERC721Receiver{
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/functiononERC721Received(address operator,
addressfrom,
uint256 tokenId,
bytescalldata data
) externalreturns (bytes4);
}
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;import"./ERC165.sol";
import"./GenericErrors.sol";
import"../interfaces/INiftyEntityCloneable.sol";
import"../interfaces/INiftyRegistry.sol";
import"../libraries/Context.sol";
abstractcontractNiftyPermissionsisContext, ERC165, GenericErrors, INiftyEntityCloneable{
eventAdminTransferred(addressindexed previousAdmin, addressindexed newAdmin);
// Only allow Nifty Entity to be initialized onceboolinternal initializedNiftyEntity;
// If address(0), use enable Nifty Gateway permissions - otherwise, specifies the address with permissionsaddresspublic admin;
// To prevent a mistake, transferring admin rights will be a two step process// First, the current admin nominates a new admin// Second, the nominee accepts adminaddresspublic nominatedAdmin;
// Nifty Registry Contract
INiftyRegistry internal permissionsRegistry;
functioninitializeNiftyEntity(address niftyRegistryContract_) public{
require(!initializedNiftyEntity, ERROR_REINITIALIZATION_NOT_PERMITTED);
permissionsRegistry = INiftyRegistry(niftyRegistryContract_);
initializedNiftyEntity =true;
}
functionsupportsInterface(bytes4 interfaceId) publicviewvirtualoverride(ERC165, IERC165) returns (bool) {
return
interfaceId ==type(INiftyEntityCloneable).interfaceId||super.supportsInterface(interfaceId);
}
functionrenounceAdmin() external{
_requireOnlyValidSender();
_transferAdmin(address(0));
}
functionnominateAdmin(address nominee) external{
_requireOnlyValidSender();
nominatedAdmin = nominee;
}
functionacceptAdmin() external{
address nominee = nominatedAdmin;
require(_msgSender() == nominee, ERROR_INVALID_MSG_SENDER);
_transferAdmin(nominee);
}
function_requireOnlyValidSender() internalview{
address currentAdmin = admin;
if(currentAdmin ==address(0)) {
require(permissionsRegistry.isValidNiftySender(_msgSender()), ERROR_INVALID_MSG_SENDER);
} else {
require(_msgSender() == currentAdmin, ERROR_INVALID_MSG_SENDER);
}
}
function_transferAdmin(address newAdmin) internal{
address oldAdmin = admin;
admin = newAdmin;
delete nominatedAdmin;
emit AdminTransferred(oldAdmin, newAdmin);
}
}
Contract Source Code
File 24 of 31: RejectEther.sol
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;/**
* @title A base contract that may be inherited in order to protect a contract from having its fallback function
* invoked and to block the receipt of ETH by a contract.
* @author Nathan Gang
* @notice This contract bestows on inheritors the ability to block ETH transfers into the contract
* @dev ETH may still be forced into the contract - it is impossible to block certain attacks, but this protects from accidental ETH deposits
*/// For more info, see: "https://medium.com/@alexsherbuck/two-ways-to-force-ether-into-a-contract-1543c1311c56"abstractcontractRejectEther{
/**
* @dev For most contracts, it is safest to explicitly restrict the use of the fallback function
* This would generally be invoked if sending ETH to this contract with a 'data' value provided
*/fallback() externalpayable{
revert("Fallback function not permitted");
}
/**
* @dev This is the standard path where ETH would land if sending ETH to this contract without a 'data' value
* In our case, we don't want our contract to receive ETH, so we restrict it here
*/receive() externalpayable{
revert("Receiving ETH not permitted");
}
}
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;import"../interfaces/IERC20.sol";
import"./Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/librarySafeERC20{
usingAddressforaddress;
functionsafeTransfer(
IERC20 token,
address to,
uint256 value
) internal{
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
functionsafeTransferFrom(
IERC20 token,
addressfrom,
address to,
uint256 value
) internal{
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/function_callOptionalReturn(IERC20 token, bytesmemory data) private{
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that// the target address contains contract code and also asserts for success in the low-level call.bytesmemory returndata =address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length>0) {
// Return data is optionalrequire(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;/**
* @dev String operations.
*/libraryStrings{
bytes16privateconstant _HEX_SYMBOLS ="0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/functiontoString(uint256 value) internalpurereturns (stringmemory) {
// Inspired by OraclizeAPI's implementation - MIT licence// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.solif (value ==0) {
return"0";
}
uint256 temp = value;
uint256 digits;
while (temp !=0) {
digits++;
temp /=10;
}
bytesmemory buffer =newbytes(digits);
while (value !=0) {
digits -=1;
buffer[digits] =bytes1(uint8(48+uint256(value %10)));
value /=10;
}
returnstring(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/functiontoHexString(uint256 value) internalpurereturns (stringmemory) {
if (value ==0) {
return"0x00";
}
uint256 temp = value;
uint256 length =0;
while (temp !=0) {
length++;
temp >>=8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/functiontoHexString(uint256 value, uint256 length) internalpurereturns (stringmemory) {
bytesmemory buffer =newbytes(2* length +2);
buffer[0] ="0";
buffer[1] ="x";
for (uint256 i =2* length +1; i >1; --i) {
buffer[i] = _HEX_SYMBOLS[value &0xf];
value >>=4;
}
require(value ==0, "Strings: hex length insufficient");
returnstring(buffer);
}
}
Contract Source Code
File 31 of 31: Withdrawable.sol
// SPDX-License-Identifier: MITpragmasolidity 0.8.9;import"./RejectEther.sol";
import"./NiftyPermissions.sol";
import"../interfaces/IERC20.sol";
import"../interfaces/IERC721.sol";
abstractcontractWithdrawableisRejectEther, NiftyPermissions{
/**
* @dev Slither identifies an issue with sending ETH to an arbitrary destianation.
* https://github.com/crytic/slither/wiki/Detector-Documentation#functions-that-send-ether-to-arbitrary-destinations
* Recommended mitigation is to "Ensure that an arbitrary user cannot withdraw unauthorized funds."
* This mitigation has been performed, as only the contract admin can call 'withdrawETH' and they should
* verify the recipient should receive the ETH first.
*/functionwithdrawETH(addresspayable recipient, uint256 amount) external{
_requireOnlyValidSender();
require(amount >0, ERROR_ZERO_ETH_TRANSFER);
require(recipient !=address(0), "Transfer to zero address");
uint256 currentBalance =address(this).balance;
require(amount <= currentBalance, ERROR_INSUFFICIENT_BALANCE);
//slither-disable-next-line arbitrary-send
(bool success,) = recipient.call{value: amount}("");
require(success, ERROR_WITHDRAW_UNSUCCESSFUL);
}
functionwithdrawERC20(address tokenContract, address recipient, uint256 amount) external{
_requireOnlyValidSender();
bool success = IERC20(tokenContract).transfer(recipient, amount);
require(success, ERROR_WITHDRAW_UNSUCCESSFUL);
}
functionwithdrawERC721(address tokenContract, address recipient, uint256 tokenId) external{
_requireOnlyValidSender();
IERC721(tokenContract).safeTransferFrom(address(this), recipient, tokenId, "");
}
}