pragma solidity ^0.5.0;


library SafeMath {
  /**
   * @dev Returns the addition of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `+` operator.
   *
   * Requirements:
   * - Addition cannot overflow.
   */
  function add(uint256 a, uint256 b) internal pure returns (uint256) {
    uint256 c = a + b;
    require(c >= a, "SafeMath: addition overflow");

    return c;
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting on
   * overflow (when the result is negative).
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   * - Subtraction cannot overflow.
   */
  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b <= a, "SafeMath: subtraction overflow");
    uint256 c = a - b;

    return c;
  }

  /**
   * @dev Returns the multiplication of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `*` operator.
   *
   * Requirements:
   * - Multiplication cannot overflow.
   */
  function mul(uint256 a, uint256 b) internal pure returns (uint256) {
    // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
    // benefit is lost if 'b' is also tested.
    // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
    if (a == 0) {
      return 0;
    }

    uint256 c = a * b;
    require(c / a == b, "SafeMath: multiplication overflow");

    return c;
  }

  /**
   * @dev Returns the integer division of two unsigned integers. Reverts on
   * division by zero. The result is rounded towards zero.
   *
   * Counterpart to Solidity's `/` operator. Note: this function uses a
   * `revert` opcode (which leaves remaining gas untouched) while Solidity
   * uses an invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   * - The divisor cannot be zero.
   */
  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    // Solidity only automatically asserts when dividing by 0
    require(b > 0, "SafeMath: division by zero");
    uint256 c = a / b;
    // assert(a == b * c + a % b); // There is no case in which this doesn't hold

    return c;
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
   * Reverts when dividing by zero.
   *
   * Counterpart to Solidity's `%` operator. This function uses a `revert`
   * opcode (which leaves remaining gas untouched) while Solidity uses an
   * invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   * - The divisor cannot be zero.
   */
  function mod(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b != 0, "SafeMath: modulo by zero");
    return a % b;
  }
}


interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a `Transfer` event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through `transferFrom`. This is
   * zero by default.
   *
   * This value changes when `approve` or `transferFrom` are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * > Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an `Approval` event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a `Transfer` event.
   */
  function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to `approve`. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}


/**
 * @dev Optional functions from the ERC20 standard.
 */
contract ERC20Detailed is IERC20 {
  string private _name;
  string private _symbol;
  uint8 private _decimals;

  /**
   * @dev Sets the values for `name`, `symbol`, and `decimals`. All three of
   * these values are immutable: they can only be set once during
   * construction.
   */
  constructor (string memory name, string memory symbol, uint8 decimals) public {
    _name = name;
    _symbol = symbol;
    _decimals = decimals;
  }

  /**
   * @dev Returns the name of the token.
   */
  function name() public view returns (string memory) {
    return _name;
  }

  /**
   * @dev Returns the symbol of the token, usually a shorter version of the
   * name.
   */
  function symbol() public view returns (string memory) {
    return _symbol;
  }

  /**
   * @dev Returns the number of decimals used to get its user representation.
   * For example, if `decimals` equals `2`, a balance of `505` tokens should
   * be displayed to a user as `5,05` (`505 / 10 ** 2`).
   *
   * Tokens usually opt for a value of 18, imitating the relationship between
   * Ether and Wei.
   *
   * > Note that this information is only used for _display_ purposes: it in
   * no way affects any of the arithmetic of the contract, including
   * `IERC20.balanceOf` and `IERC20.transfer`.
   */
  function decimals() public view returns (uint8) {
    return _decimals;
  }
}



contract ERC20 is IERC20 {
  using SafeMath for uint256;

  mapping (address => uint256) private _balances;

  mapping (address => mapping (address => uint256)) private _allowances;

  uint256 private _totalSupply;

  /**
   * @dev See `IERC20.totalSupply`.
   */
  function totalSupply() public view returns (uint256) {
    return _totalSupply;
  }

  /**
   * @dev See `IERC20.balanceOf`.
   */
  function balanceOf(address account) public view returns (uint256) {
    return _balances[account];
  }

  /**
   * @dev See `IERC20.transfer`.
   *
   * Requirements:
   *
   * - `recipient` cannot be the zero address.
   * - the caller must have a balance of at least `amount`.
   */
  function transfer(address recipient, uint256 amount) public returns (bool) {
    _transfer(msg.sender, recipient, amount);
    return true;
  }

  /**
   * @dev See `IERC20.allowance`.
   */
  function allowance(address owner, address spender) public view returns (uint256) {
    return _allowances[owner][spender];
  }

  /**
   * @dev See `IERC20.approve`.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   */
  function approve(address spender, uint256 value) public returns (bool) {
    _approve(msg.sender, spender, value);
    return true;
  }

  /**
   * @dev See `IERC20.transferFrom`.
   *
   * Emits an `Approval` event indicating the updated allowance. This is not
   * required by the EIP. See the note at the beginning of `ERC20`;
   *
   * Requirements:
   * - `sender` and `recipient` cannot be the zero address.
   * - `sender` must have a balance of at least `value`.
   * - the caller must have allowance for `sender`'s tokens of at least
   * `amount`.
   */
  function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
    _transfer(sender, recipient, amount);
    _approve(sender, msg.sender, _allowances[sender][msg.sender].sub(amount));
    return true;
  }

  /**
   * @dev Atomically increases the allowance granted to `spender` by the caller.
   *
   * This is an alternative to `approve` that can be used as a mitigation for
   * problems described in `IERC20.approve`.
   *
   * Emits an `Approval` event indicating the updated allowance.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   */
  function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
    _approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
    return true;
  }

  /**
   * @dev Atomically decreases the allowance granted to `spender` by the caller.
   *
   * This is an alternative to `approve` that can be used as a mitigation for
   * problems described in `IERC20.approve`.
   *
   * Emits an `Approval` event indicating the updated allowance.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   * - `spender` must have allowance for the caller of at least
   * `subtractedValue`.
   */
  function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
    _approve(msg.sender, spender, _allowances[msg.sender][spender].sub(subtractedValue));
    return true;
  }

  /**
   * @dev Moves tokens `amount` from `sender` to `recipient`.
   *
   * This is internal function is equivalent to `transfer`, and can be used to
   * e.g. implement automatic token fees, slashing mechanisms, etc.
   *
   * Emits a `Transfer` event.
   *
   * Requirements:
   *
   * - `sender` cannot be the zero address.
   * - `recipient` cannot be the zero address.
   * - `sender` must have a balance of at least `amount`.
   */
  function _transfer(address sender, address recipient, uint256 amount) internal {
    require(sender != address(0), "ERC20: transfer from the zero address");
    require(recipient != address(0), "ERC20: transfer to the zero address");

    _balances[sender] = _balances[sender].sub(amount);
    _balances[recipient] = _balances[recipient].add(amount);
    emit Transfer(sender, recipient, amount);
  }

  /** @dev Creates `amount` tokens and assigns them to `account`, increasing
   * the total supply.
   *
   * Emits a `Transfer` event with `from` set to the zero address.
   *
   * Requirements
   *
   * - `to` cannot be the zero address.
   */
  function _mint(address account, uint256 amount) internal {
    require(account != address(0), "ERC20: mint to the zero address");

    _totalSupply = _totalSupply.add(amount);
    _balances[account] = _balances[account].add(amount);
    emit Transfer(address(0), account, amount);
  }

  /**
  * @dev Destoys `amount` tokens from `account`, reducing the
  * total supply.
  *
  * Emits a `Transfer` event with `to` set to the zero address.
  *
  * Requirements
  *
  * - `account` cannot be the zero address.
  * - `account` must have at least `amount` tokens.
  */
  function _burn(address account, uint256 value) internal {
    require(account != address(0), "ERC20: burn from the zero address");

    _totalSupply = _totalSupply.sub(value);
    _balances[account] = _balances[account].sub(value);
    emit Transfer(account, address(0), value);
  }

  /**
   * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
   *
   * This is internal function is equivalent to `approve`, and can be used to
   * e.g. set automatic allowances for certain subsystems, etc.
   *
   * Emits an `Approval` event.
   *
   * Requirements:
   *
   * - `owner` cannot be the zero address.
   * - `spender` cannot be the zero address.
   */
  function _approve(address owner, address spender, uint256 value) internal {
    require(owner != address(0), "ERC20: approve from the zero address");
    require(spender != address(0), "ERC20: approve to the zero address");

    _allowances[owner][spender] = value;
    emit Approval(owner, spender, value);
  }

  /**
   * @dev Destoys `amount` tokens from `account`.`amount` is then deducted
   * from the caller's allowance.
   *
   * See `_burn` and `_approve`.
   */
  function _burnFrom(address account, uint256 amount) internal {
    _burn(account, amount);
    _approve(account, msg.sender, _allowances[account][msg.sender].sub(amount));
  }
}



//SimpleToken 代币的名字可以修改你自己的，SIM是符号，18个小数位
contract EShopToken is ERC20, ERC20Detailed {

  /**
   * @dev Constructor that gives msg.sender all of existing tokens.
   */
  constructor () public ERC20Detailed("E-Shop", "ES", 18) {
    _mint(msg.sender, 2000000000 * (10 ** uint256(decimals())));
  }
}

{
  "compilationTarget": {
    "EShopToken.sol": "EShopToken"
  },
  "evmVersion": "byzantium",
  "libraries": {},
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}