// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC20.sol";
import "../../../utils/Context.sol";
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 currentAllowance = allowance(account, _msgSender());
require(currentAllowance >= amount, "ERC20: burn amount exceeds allowance");
unchecked {
_approve(account, _msgSender(), currentAllowance - amount);
}
_burn(account, amount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721Receiver.sol";
/**
* @dev Implementation of the {IERC721Receiver} interface.
*
* Accepts all token transfers.
* Make sure the contract is able to use its token with {IERC721-safeTransferFrom}, {IERC721-approve} or {IERC721-setApprovalForAll}.
*/
contract ERC721Holder is IERC721Receiver {
/**
* @dev See {IERC721Receiver-onERC721Received}.
*
* Always returns `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address,
address,
uint256,
bytes memory
) public virtual override returns (bytes4) {
return this.onERC721Received.selector;
}
}
// This library is derived from the ambient FixedPoint library, with some minor changes for clarity and safety
// SPDX-License-Identifier: GPL-3
pragma solidity 0.8.19;
import "hardhat/console.sol";
/// @title FixedPoint128
/// @notice A library for handling binary fixed point numbers, see https://en.wikipedia.org/wiki/Q_(number_format)
/// @dev the numbers expected as input to these functions are representation of fixed point fractional numbers,
/// denoted by Qy or Qx.y where the least significant y bits represent the fractional part and the most
/// significant x bits (or the remaining bits) represent the whole part
/// the simplest way to create one from an integer is to left shift by y. To convert back to an integer right shift by y
library FixedPoint {
/// @notice A Q64.64 fixed point number, encoded as a uint128 where
/// the most significant 64 bits are the whole part and the least significant 64 bits are the fractional part
struct q64x64 {
uint128 value;
}
/// @notice Converts a Q64.64 fixed point number to an integer (uint64)
/// @dev this truncates the fractional part of the number by right shifting
function toUint(q64x64 memory x) internal pure returns (uint64) {
return uint64(x.value >> 64);
}
/// @notice Converts an integer (uint64) to a Q64.64 fixed point number
/// @dev the conversion is to left shift by 64, which is the same as multiplying by 2^64
function toQ64x64(uint64 x) internal pure returns (q64x64 memory) {
return q64x64(uint128(x) << 64);
}
/// @notice Converts a Q64.64 fixed point number to a Q128.64 fixed point number
/// @dev no shifting happens here, just recast the internal value and pass to the new struct
function toQ128x64(q64x64 memory x) internal pure returns (q128x64 memory) {
return q128x64(uint192(x.value));
}
/// @notice A Q128.64 fixed point number, encoded as a uint192 where
/// the most significant 128 bits are the whole part and the least significant 64 bits are the fractional part
struct q128x64 {
uint192 value;
}
/// @notice Converts a Q128.64 fixed point number to an integer (uint64)
/// @dev this truncates the fractional part of the number by right shifting
function toUint(q128x64 memory x) internal pure returns (uint128) {
return uint128(x.value >> 64);
}
/// @notice Converts an integer (uint128) to a Q128.64 fixed point number
/// @dev the conversion is to left shift by 64, which is the same as multiplying by 2^64
function toQ128x64(uint128 x) internal pure returns (q128x64 memory) {
return q128x64(uint192(x) << 64);
}
/// @notice Converts an integer (uint256) to a Q128.64 fixed point number, the integer must be within range
/// @dev the conversion is to left shift by 64, which is the same as multiplying by 2^64
function toQ128x64(uint256 x) internal pure returns (q128x64 memory) {
require(x <= type(uint128).max, "FixedPoint: too large");
return q128x64(uint192(x) << 64);
}
/// @notice A Q192.64 fixed point number, encoded as a uint256 where
/// the most significant 192 bits are the whole part and the least significant 64 bits are the fractional part
struct q192x64 {
uint256 value;
}
/// @notice Converts a Q128.64 fixed point number to an integer (uint64)
/// @dev this truncates the fractional part of the number by right shifting
function toUint(q192x64 memory x) internal pure returns (uint192) {
return uint192(x.value >> 64);
}
/// @notice Converts an integer (uint192) to a Q192.64 fixed point number
/// @dev the conversion is to left shift by 64, which is the same as multiplying by 2^64
function toQ192x64(uint192 x) internal pure returns (q192x64 memory) {
return q192x64(uint256(x) << 64);
}
/// @notice Converts a Q192.64 fixed point number to a Q128.64 fixed point number, reverts if x is too large
function toQ128x64(q192x64 memory x) internal pure returns (q128x64 memory) {
require(x.value <= type(uint192).max, "FixedPoint: too large");
return q128x64(uint192(x.value));
}
/// @notice Adds two Q64.64 numbers together
/// @param x A Q64.64 number, where the least significant 64 bits represent the fractional part and the most significant 64 bits represent the whole part
/// @param y A Q64.64 number, where the least significant 64 bits represent the fractional part and the most significant 64 bits represent the whole part
/// @return The result of x + y, as a Q64.64 number
function addQ64 (q64x64 memory x, q64x64 memory y) internal pure returns (q64x64 memory) {
return q64x64(x.value + y.value);
}
/// @notice Subtracts one Q64.64 number from another
/// @param x A Q64.64 number, where the least significant 64 bits represent the fractional part and the most significant 64 bits represent the whole part
/// @param y A Q64.64 number, where the least significant 64 bits represent the fractional part and the most significant 64 bits represent the whole part
/// @return The result of x - y, as a Q64.64 number
function subQ64 (q64x64 memory x, q64x64 memory y) internal pure returns (q64x64 memory) {
return q64x64(x.value - y.value);
}
/// @notice Multiplies two Q64.64 numbers by each other.
/// @dev We right shift by 64 to truncate the fractional part of the result to 64 bits, rounding is not done
/// @param x A Q64.64 number, where the least significant 64 bits represent the fractional part and the most significant 64 bits represent the whole part
/// @param y A Q64.64 number, where the least significant 64 bits represent the fractional part and the most significant 64 bits represent the whole part
/// @return The result of multiplying x and y, as a Q128.64 number
function mulQ64 (q64x64 memory x, q64x64 memory y) internal pure returns (q128x64 memory) {
// By treating as a uint256 before shifting, overflow is prevented
// shifting preserves the expected radix point locaiton (64 bits of fractional precision)
// (before shifting we have 128 bits of fractional precision stored in a uint256)
return q128x64(uint192(uint256(x.value) * uint256(y.value) >> 64));
}
/// @notice Divides one Q64.64 number by another.
/// @dev We left shift by 64 first to account for the movement of the radix point during division to preserve the fractional part of the result
/// @param x A Q64.64 number, where the least significant 64 bits represent the fractional part and the most significant 64 bits represent the whole part
/// @param y A Q64.64 number, where the least significant 64 bits represent the fractional part and the most significant 64 bits represent the whole part
/// @return The result of dividing x by y, as a Q128.64 number
function divQ64 (q64x64 memory x, q64x64 memory y) internal pure returns (q128x64 memory) {
return q128x64((uint192(x.value) << 64) / y.value);
}
/// @notice Adds two Q128.64 numbers together
/// @param x A Q128.64 number, where the least significant 64 bits represent the fractional part and the most significant 128 bits represent the whole part
/// @param y A Q128.64 number, where the least significant 64 bits represent the fractional part and the most significant 128 bits represent the whole part
/// @return The result of x + y, as a Q128.64 number
function addQ128 (q128x64 memory x, q128x64 memory y) internal pure returns (q128x64 memory) {
return q128x64(x.value + y.value);
}
/// @notice Subtracts one Q128.64 number from another
/// @param x A Q128.64 number, where the least significant 64 bits represent the fractional part and the most significant 128 bits represent the whole part
/// @param y A Q128.64 number, where the least significant 64 bits represent the fractional part and the most significant 128 bits represent the whole part
/// @return The result of x - y, as a Q128.64 number
function subQ128 (q128x64 memory x, q128x64 memory y) internal pure returns (q128x64 memory) {
return q128x64(x.value - y.value);
}
/// @notice Multiplies two Q128.64 numbers by each other.
/// @dev We right shift by 64 to truncate the fractional part of the result to 64 bits, rounding is not done
/// @param x A Q128.64 number, where the least significant 64 bits represent the fractional part and the most significant 128 bits represent the whole part
/// @param y A Q128.64 number, where the least significant 64 bits represent the fractional part and the most significant 128 bits represent the whole part
/// @return The result of multiplying x and y, as a Q192.64 number
function mulQ128 (q128x64 memory x, q128x64 memory y) internal pure returns (q192x64 memory) {
// Here there's the potential for overflow, so we separate out the whole and fractional parts to prevent it
// With x = xw + xf and y = yw + yf, with xw, yw the whole parts and xf, yf the fractional parts
// x * y = (xw + xf) * (yw + yf) = xw*yw + xw*yf + yw*xf + xf*yf
uint256 xw = uint256(x.value >> 64);
uint256 xf = uint64(uint192(x.value << 128) >> 128);
uint256 yw = uint256(y.value >> 64);
uint256 yf = uint64(uint192(y.value << 128) >> 128);
uint256 work = xw * yw << 64;
work += xw * yf;
work += xf * yw;
work += (xf * yf) >> 64;
return q192x64(work);
}
/// @notice Divides one Q128.64 number by another
/// @dev We left shift by 64 first to account for the movement of the radix point during division to preserve the fractional part of the result
/// @param x A Q128.64 number, where the least significant 64 bits represent the fractional part and the most significant 128 bits represent the whole part
/// @param y A Q128.64 number, where the least significant 64 bits represent the fractional part and the most significant 128 bits represent the whole part
/// @return The result of dividing x by y, as a Q192.64 number
function divQ128 (q128x64 memory x, q128x64 memory y) internal pure returns (q192x64 memory) {
return q192x64((uint256(x.value) << 64) / y.value);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
//SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.19; // Force solidity compliance
import "@openzeppelin/contracts/utils/math/Math.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/token/ERC721/utils/ERC721Holder.sol";
import "@openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "./LiquidInfrastructureNFT.sol";
import "./libraries/FixedPoint.sol";
/// TODO: Reentrancy audit of all public functions
/// TODO: Audit all for loops, especially in the withdrawFromManagedNFTs function
/**
* @title Liquid Infrastructure ERC20
* @author Christian Borst <christian@althea.systems>
*
* @dev An ERC20 contract which distributes revenue from managed LiquidInfrastructreNFTs.
*
* A LiquidInfrastructureNFT typically represents some form of infrastructure involved in an Althea pay-per-forward network
* which frequently receives payments from peers on the network for performing an automated service (e.g. providing internet).
* This LiquidInfrastructureERC20 acts as a convenient aggregation layer to enable dead-simple investment in real-world assets
* with automatic revenue accrual.
*
* Revenue is gathered from managed LiquidInfrastructureNFTs by the protocol and allocated to stakers of this ERC20.
*/
contract LiquidInfrastructureERC20 is
ERC20,
ERC20Burnable,
Ownable,
ERC721Holder,
ReentrancyGuard
{
event Deployed();
event WithdrawalStarted();
event Withdrawal(address source);
event WithdrawalFinished();
event AddManagedNFT(address nft);
event ReleaseManagedNFT(address nft, address to);
event Stake(address holder, uint256 amount);
event ClaimRevenue(address holder);
event Unstake(address holder, uint256 amount);
/**
* @notice This is the current version of the contract. Every update to the contract will introduce a new
* version, regardless of anticipated compatibility.
*/
uint256 public constant Version = 2;
////////////////////////// Allow List //////////////////////////
/**
* @notice This collection holds the whitelist for accounts approved to hold the LiquidInfrastructureERC20
*/
mapping(address => bool) public HolderAllowlist;
/**
* @notice Indicates if the account is approved to hold the ERC20 token or not
* @param account the potential holder of the token
* @return true if the account is on the HolderAllowlist, false otherwise
*/
function isApprovedHolder(address account) public view returns (bool) {
return HolderAllowlist[account];
}
/**
* @notice Adds `holder` to the list of approved token holders. This is necessary before `holder` may receive any of the underlying ERC20.
* this call will fail if `holder` is already approved. Call isApprovedHolder() first to avoid mistakes.
* @param holder the account to add to the allowlist
*/
function approveHolder(address holder) public onlyOwner {
require(!isApprovedHolder(holder), "holder already approved");
HolderAllowlist[holder] = true;
}
/**
* @notice Marks `holder` as NOT approved to hold the token, preventing them from receiving any more of the underlying ERC20.
* @param holder the account to add to the allowlist
*/
function disapproveHolder(address holder) public onlyOwner {
require(isApprovedHolder(holder), "holder not approved");
HolderAllowlist[holder] = false;
uint256 position = getStake(holder);
if (position > 0) {
_unstakeFor(holder, position);
}
}
/**
* @dev Restricts certain token transfers, in particular all holders must be approved
*/
function _beforeTokenTransfer(
address from,
address to,
uint256
) internal virtual override {
// Staking is allowed by only the approved holders
// Unstaking must be allowed by even disapproved holders, may not unstake to this address or the zero address
// Mints are allowed to only approved holders, and never to this address or the zero address
// Burns are allowed by only approved holders, and never from this address or the zero address
bool mint_ = from == address(0);
bool burn_ = to == address(0);
bool stake_ = to == address(this);
bool unstake_ = from == address(this);
require(!(mint_ && burn_), "invalid mint/burn"); // Mint and burn are mutually exclusive
require(!((mint_ || burn_) && (stake_ || unstake_)), "mint/burn with stake/unstake"); // Mint/burn and stake/unstake are mutually exclusive
require(!(stake_ && unstake_), "invalid stake/unstake"); // Stake and unstake are mutually exclusive
if (mint_) {
require(
isApprovedHolder(to),
"unapproved mint"
);
}
if (burn_) {
require(
isApprovedHolder(from),
"unapproved burn"
);
}
if (stake_) {
require(
isApprovedHolder(from),
"unapproved stake"
);
}
// Unstaking must be allowed from even disapproved holders
}
////////////////////////// NFT Management and Revenue Withdrawals //////////////////////////
/// @notice This collection holds the managed LiquidInfrastructureNFTs which periodically generate revenue and deliver
/// the balances to this contract.
address[] public ManagedNFTs;
function getManagedNFTs() public view returns (address[] memory) {
return ManagedNFTs;
}
/**
* @notice Adds a LiquidInfrastructureNFT contract to the ManagedNFTs collection, transferring the NFT from msg.sender if necessary
* @dev LiquidInfrastructureNFTs only hold a single token with a specific id (AccountId), this function
* only transfers the token with that specific id
* @param nftContract the LiquidInfrastructureNFT contract to add to ManagedNFTs
*/
function addManagedNFT(address nftContract) public onlyOwner nonReentrant {
require(nextWithdrawal == 0, "withdrawal in progress");
LiquidInfrastructureNFT nft = LiquidInfrastructureNFT(nftContract);
address nftOwner = nft.ownerOf(nft.AccountId());
// If this contract is not the owner of the NFT, transfer it
if (nftOwner != address(this)) {
nft.transferFrom(msg.sender, address(this), nft.AccountId());
require(nft.ownerOf(nft.AccountId()) == address(this), "nft transfer");
}
ManagedNFTs.push(nftContract);
emit AddManagedNFT(nftContract);
}
/**
* @notice Transfers a LiquidInfrastructureNFT contract out of the control of this contract
* @dev LiquidInfrastructureNFTs only hold a single token with a specific id (AccountId), this function
* only transfers the token with that specific id
*
* @param nftContract the NFT to release
* @param to the new owner of the NFT
*/
function releaseManagedNFT(
address nftContract,
address to
) public onlyOwner nonReentrant {
require(nextWithdrawal == 0, "withdrawal in progress");
LiquidInfrastructureNFT nft = LiquidInfrastructureNFT(nftContract);
bool found = false;
// Remove the released NFT from the collection
for (uint i = 0; i < ManagedNFTs.length; i++) {
address managed = ManagedNFTs[i];
if (managed == nftContract) {
found = true;
// Delete by copying in the last element and then pop the end
ManagedNFTs[i] = ManagedNFTs[ManagedNFTs.length - 1];
ManagedNFTs.pop();
break;
}
}
// By this point the NFT should have been found and removed from ManagedNFTs
require(found, "NFT not Managed");
nft.transferFrom(address(this), to, nft.AccountId());
emit ReleaseManagedNFT(nftContract, to);
}
/// @dev the ERC20s which may be distributed to stakers
address[] private distributableERC20s;
/// @notice Allows the owner to add a new ERC20 to be distributed to holders
/// @param newERC20 The new list value to set
function addDistributableERC20(
IERC20 newERC20
) public onlyOwner {
require(nextWithdrawal == 0, "withdrawal in progress");
distributableERC20s.push(address(newERC20));
_ssDistributableHoldings.push(0);
revenueAccumsPerStake.push(FixedPoint.q128x64(0));
}
/// @notice Returns the list of ERC20s which are distributed to holders
function getDistributableERC20s() public view returns (address[] memory) {
return distributableERC20s;
}
/**
* @notice Allows the owner to transfer ERC20s not on the distributableERC20s list to a recipient
* This function is particularly useful for removing balances from the contract which were collected
* through a ManagedNFT with misconfigured thresholds
* @param token the ERC20 token to transfer
* @param recipient the recipient of the tokens
*/
function transferNondistributableERC20(
address token,
address recipient
) public onlyOwner {
for (uint i = 0; i < distributableERC20s.length; i++) {
require(distributableERC20s[i] != token, "token is distributable");
}
IERC20(token).transfer(recipient, IERC20(token).balanceOf(address(this)));
}
/// @notice Withdraws revenue from all of the managed NFTs. This call may cause gas errors, in which case
/// the caller should repeatedly call withdrawFromManagedNFTs() with a smaller number of withdrawals.
function withdrawFromAllManagedNFTs() public {
withdrawFromManagedNFTs(ManagedNFTs.length);
}
/// @dev Used to store the starting balances of the distributable ERC20s for updating the revenueAccumsPerStake values
uint256[] _ssDistributableHoldings;
uint256 nextWithdrawal;
/// @notice Performs withdrawals from the ManagedNFTs collection, depositing all token balances into the custody of this contract
/// @param numWithdrawals the number of withdrawals to perform
function withdrawFromManagedNFTs(uint256 numWithdrawals) public {
require(totalStake > 0, "no stakers");
_snapshotDistributableHoldings();
if (nextWithdrawal == 0) {
emit WithdrawalStarted();
}
uint256 limit = Math.min(
numWithdrawals + nextWithdrawal,
ManagedNFTs.length
);
uint256 i;
for (i = nextWithdrawal; i < limit; i++) {
LiquidInfrastructureNFT withdrawFrom = LiquidInfrastructureNFT(
ManagedNFTs[i]
);
(address[] memory withdrawERC20s, ) = withdrawFrom.getThresholds();
withdrawFrom.withdrawBalancesTo(withdrawERC20s, address(this));
emit Withdrawal(address(withdrawFrom));
}
nextWithdrawal = i;
if (nextWithdrawal == ManagedNFTs.length) {
nextWithdrawal = 0;
emit WithdrawalFinished();
}
_updateRevenueAccumulators();
}
/// @dev stores the distributable holdings at the start of a withdrawal
function _snapshotDistributableHoldings() internal {
for (uint i = 0; i < distributableERC20s.length; i++) {
uint256 balance = IERC20(distributableERC20s[i]).balanceOf(address(this));
_ssDistributableHoldings[i] = balance;
}
}
/// @dev updates the revenueAccumsPerStake values based on the newly withdrawn revenue
function _updateRevenueAccumulators() internal {
for (uint i = 0; i < distributableERC20s.length; i++) {
uint256 balance = IERC20(distributableERC20s[i]).balanceOf(address(this));
uint256 diff = balance - _ssDistributableHoldings[i];
if (diff > 0) {
// Warning: overflow risk here - the math is all checked but the tx can revert
// The accumulators store the total revenue divided by the total stake at the time of collection
// increase = diff / totalStake
FixedPoint.q128x64 memory increase = FixedPoint.toQ128x64(FixedPoint.divQ128(FixedPoint.toQ128x64(diff), FixedPoint.toQ128x64(totalStake)));
// accumulator += increase
revenueAccumsPerStake[i] = FixedPoint.addQ128(revenueAccumsPerStake[i], increase);
}
}
}
/**
* @notice Allows the owner to update the thresholds for a ManagedNFT
* @param nft the ManagedNFT to update
* @param newErc20s the address[] parameter to nft.setThresholds()
* @param newAmounts the uint256[] parameter to nft.setThresholds()
*/
function setManagedNFTThresholds(
address nft,
address[] calldata newErc20s,
uint256[] calldata newAmounts
) public onlyOwner {
for (uint i = 0; i < ManagedNFTs.length; i++) {
if (ManagedNFTs[i] == nft) {
LiquidInfrastructureNFT(nft).setThresholds(newErc20s, newAmounts);
return;
}
}
revert("nft not Managed");
}
////////////////////////// Staking //////////////////////////
/// @dev The amount of fully staked tokens by holder address, with the snapshotted revenue accumulators
struct StakePosition {
uint256 amount;
FixedPoint.q128x64[] snapshotAccumulators;
}
mapping(address => StakePosition) stakes;
/// @dev The total amount of vested stake in the contract
uint256 public totalStake;
function getStake(address holder) public view returns (uint256) {
return stakes[holder].amount;
}
/**
* @notice Allows the caller to stake their tokens in the contract
* @param amount the amount of tokens to stake
*/
function stake(uint256 amount) public nonReentrant {
_stakeFor(msg.sender, amount);
}
function _stakeFor(address staker, uint256 amount) internal {
require(balanceOf(staker) >= amount, "insufficient balance");
_transfer(staker, address(this), amount);
StakePosition storage position = stakes[staker];
if (position.amount > 0) {
_claimRevenueFor(staker);
}
position.amount += amount;
totalStake += amount;
position.snapshotAccumulators = revenueAccumsPerStake;
stakes[staker] = position;
emit Stake(staker, amount);
}
/**
* @notice Allows the caller to unstake their entire staking position from the contract
* The caller's revenue will be claimed as part of this operation
*/
function unstake(uint256 amount) public {
_unstakeFor(msg.sender, amount);
}
function _unstakeFor(address staker, uint256 amount) internal {
StakePosition storage position = stakes[staker];
require(position.amount > 0, "no position to unstake");
require(amount <= position.amount, "amount too large");
_claimRevenueFor(staker);
totalStake -= amount;
_transfer(address(this), staker, amount);
position.amount -= amount;
if (position.amount == 0) {
delete stakes[staker];
} else {
stakes[staker] = position;
}
emit Unstake(staker, amount);
}
/**
* @dev revenue accumulator values per stake for each distributable ERC20
* these "accumulator" values track LiquidInfrastructureNFT withdrawals and are used to calculate the reward
* for each user based on their share of the total supply
*
* We store the total rewards accumulated per distributable ERC20 divided by the total amount of stake at the point of withdrawal
* For a holder to earn rewards, they must first stake their token holding, whereby the current accumulator is
* snapshotted for the holder. Later when they claim rewards or unstake, their rewards will be [stake * (current accumulator - snapshot accumulator)]
* The direct values here represents a staker who staked a single wei at contract genesis and has never unstaked, claimed revenue, or restaked other amounts
* and would be entitled to the truncated value of the accumulator if they were to unstake, claim revenue, or restake right now
*/
FixedPoint.q128x64[] private revenueAccumsPerStake;
/**
* @notice Allows the contract owner to mint tokens for an address
*/
function mint(
address account,
uint256 amount
) public onlyOwner nonReentrant {
_mint(account, amount);
}
/**
* @notice Mints new tokens to `account` and stakes them
*/
function mintStaked(
address account,
uint256 amount
) public onlyOwner nonReentrant {
_mint(account, amount);
_stakeFor(account, amount);
}
////////////////////////// Revenue Claiming //////////////////////////
/// @notice The address of the LiquidInfrastructureMulticlaim contract, which is allowed to call claimRevenueFor()
/// on behalf of stakers.
address public multiclaim;
/// @notice Stakers may claim any accrued revenue for their staking position
/// @dev revenue must be claimed when unstaking or increasing stake amount
function claimRevenue() public nonReentrant {
_claimRevenueFor(msg.sender);
}
/// @notice Stakers may use the multiclaim contract to claim revenue for multiple LiquidInfrastructureERC20 instances
function claimRevenueFor(address staker) public nonReentrant {
require(msg.sender == multiclaim, "invalid caller");
_claimRevenueFor(staker);
}
/// @dev Claims revenue for a staker
function _claimRevenueFor(address staker) internal {
StakePosition storage position = stakes[staker];
require(position.amount > 0, "invalid staking position");
// It is possible this position was made before a distributable ERC20 was added, so we add 0 for each missing value
while (position.snapshotAccumulators.length < distributableERC20s.length) {
position.snapshotAccumulators.push(FixedPoint.q128x64(0));
}
// Withdraw all allocated rewards for each distributable ERC20
for (uint i = 0; i < distributableERC20s.length; i++) {
// Get the current accumulator value for the relevant ERC20
FixedPoint.q128x64 memory accum = revenueAccumsPerStake[i];
// Calculate the entitlement per staked token (current accumulator - snapshot)
FixedPoint.q128x64 memory entitlement = FixedPoint.subQ128(accum, position.snapshotAccumulators[i]);
// The actual revenue is (staked amount) * (entitlement per stake)
uint256 revenue = FixedPoint.toUint(FixedPoint.mulQ128(entitlement, FixedPoint.toQ128x64(position.amount)));
SafeERC20.safeTransfer(IERC20(distributableERC20s[i]), staker, revenue);
}
// Update the accumulator snapshots
position.snapshotAccumulators = revenueAccumsPerStake;
stakes[staker] = position;
emit ClaimRevenue(staker);
}
/// @notice Allows anyone to estimate the revenue owed to a stakers' position
function estimateRevenueFor(address staker) public view returns (uint256[] memory) {
StakePosition storage position = stakes[staker];
uint256[] memory revenues = new uint256[](distributableERC20s.length);
for (uint i = 0; i < distributableERC20s.length; i++) {
// Get the current accumulator value for the relevant ERC20
FixedPoint.q128x64 memory accum = revenueAccumsPerStake[i];
// Calculate the entitlement per staked token (current accumulator - snapshot)
FixedPoint.q128x64 memory entitlement = FixedPoint.subQ128(accum, position.snapshotAccumulators[i]);
// The actual reward is (staked amount) * (entitlement per stake)
uint256 revenue = FixedPoint.toUint(FixedPoint.mulQ128(entitlement, FixedPoint.toQ128x64(position.amount)));
revenues[i] = revenue;
}
return revenues;
}
/**
* Constructs the underlying ERC20 and initializes critical variables
*
* @param _name The name of the underlying ERC20
* @param _symbol The symbol of the underlying ERC20
* @param _approvedHolders The addresses of the initial allowed holders
* @param _distributableErc20s The addresses of ERC20s which should be distributed from ManagedNFTs to holders
*/
constructor(
string memory _name,
string memory _symbol,
address[] memory _approvedHolders,
address[] memory _distributableErc20s,
address _multiclaim
) ERC20(_name, _symbol) Ownable() {
multiclaim = _multiclaim;
for (uint i = 0; i < _approvedHolders.length; i++) {
HolderAllowlist[_approvedHolders[i]] = true;
}
distributableERC20s = _distributableErc20s;
_ssDistributableHoldings = new uint256[](_distributableErc20s.length);
for (uint i = 0; i < _distributableErc20s.length; i++) {
revenueAccumsPerStake.push(FixedPoint.q128x64(0));
}
nextWithdrawal = 0;
emit Deployed();
}
}
//SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.19; // Force solidity compliance
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "./OwnableApprovableERC721.sol";
/**
* @title Liquid Infrastructure NFT
* @author Christian Borst <christian@althea.systems>
*
* @dev An NFT contract used to control a Liquid Infrastructure Account - a Cosmos Bank module account intrinsically connected to the EVM
* through Althea's x/microtx module. On chains which are not Althea-L1 this is a standalone ERC721 which should receive revenue periodically,
* and the protocol manager must ensure LiquidInfrastructureNFTs receive the revenue they are owed.
*
* A Liquid Infrastructure Account typically represents some form of infrastructure involved in an Althea pay-per-forward network
* which frequently receives payments from peers on the network for performing an automated service (e.g. providing internet).
* Each instance of this LiquidInfrastructureNFT contract represents one x/bank module account, the address of which is a part of
* the ERC1155 URI.
*
* As the x/microtx module is used to conduct microtransactions (the payment layer for Althea networks), receiving accounts
* will accrue Cosmos Coins and likely spend these same tokens to pay their upstream costs. If any such account is a Liquid
* account (see x/microtx documentation), the x/microtx module will query this LiquidInfrastructureNFT's BalanceThresholds
* values to determine how much of which tokens to leave in the x/bank account. All excess amounts will be converted
* from Cosmos Coins to ERC20s and deposited here. The owner of the Liquid Account may later withdraw the balances
* this NFT holds via the withdrawBalances() function.
*
* Occassionally devices and wallets can be lost, in which case the owner of this contract can call recoverAccount()
* to begin a recovery process which will finish after the transaction completes. Asynchronously the x/microtx module
* will ignore thresholds and transfer all of the Liquid Account's balances to this NFT, which may be withdrawn
* normally with withdrawBalances().
*/
contract LiquidInfrastructureNFT is ERC721, OwnableApprovableERC721 {
event SuccessfulWithdrawal(address to, address[] erc20s, uint256[] amounts);
event TryRecover();
event SuccessfulRecovery(address[] erc20s, uint256[] amounts);
event ThresholdsChanged(address[] newErc20s, uint256[] newAmounts);
address[] private thresholdErc20s;
uint256[] private thresholdAmounts;
/**
* @notice This is the current version of the contract. Every update to the contract will introduce a new
* version, regardless of anticipated compatibility.
*/
uint256 public constant Version = 1;
/**
* @notice This NFT holds only 1 token in it, which is the Account token. Its Id is `1`.
* This Id is used for access control via the onlyOwner/onlyOwnerOrApproved modifiers.
* See OwnableApprovableERC721 for more info.
*/
uint256 public constant AccountId = 1;
/**
* Constructs the underlying ERC721 with a URI like "althea://liquid-infrastructure-account/{accountName}", and
* a symbol like "LIA:{accountName}".
* Mints the Account token (ID=1), the only token held in this NFT.
*
* @param accountName The bech32 address of the controlled x/bank account
*/
constructor(
string memory accountName
)
ERC721(
string.concat(
"althea://liquid-infrastructure-account/",
accountName
),
string.concat("LIA:", accountName)
)
{
_mint(msg.sender, AccountId);
}
/**
* @dev Returns the current thresholds as a collection of ERC20 addresses and a collection of balance thresholds.
* These thresholds will be used by the x/microtx module to control the operating balances that the
* liquid account is allowed to hold. Anything in excess of these balances are transferred to this contract.
*
* @return address[]: The ERC20 balances to control
* @return uint256[]: The maximum operating amount of the associated ERC20
*/
function getThresholds()
public
view
virtual
returns (address[] memory, uint256[] memory)
{
return (thresholdErc20s, thresholdAmounts);
}
/**
* @dev Updates the threshold values used by the x/microtx module which determine precisely how much
* of each token should be left in the Liquid Account's x/bank account.
*
* Any excess balances will accumulate here, and may be retrieved by the owner with
* the withdrawBalances(erc20s) method
*
* The ERC20s specified here have EVM addressses, querying the x/erc20 module will reveal their
* Cosmos Coin counterparts
*
* @param newErc20s The new threshold addresses to set
* @param newAmounts The new threshold amounts to set
*
* @notice this function is access controlled, only the owner or an approved msg.sender may call this function
*/
function setThresholds(
address[] calldata newErc20s,
uint256[] calldata newAmounts
) public virtual onlyOwnerOrApproved(AccountId) {
require(
newErc20s.length == newAmounts.length,
"threshold values must have the same length"
);
// Clear the thresholds before overwriting
delete thresholdErc20s;
delete thresholdAmounts;
for (uint i = 0; i < newErc20s.length; i++) {
thresholdErc20s.push(newErc20s[i]);
thresholdAmounts.push(newAmounts[i]);
}
emit ThresholdsChanged(newErc20s, newAmounts);
}
/**
* @dev Withdraws ERC20 balances from this contract to the owner, throws on any erc20 transfer() failure
* Emits a {SuccessfulWithdrawal} event upon success.
*
* @param erc20s A list of ERC20 tokens to withdraw NFT balances from
*
* @notice This function is access controlled, only the owner or an approved msg.sender may call this function
*/
function withdrawBalances(address[] calldata erc20s) public virtual {
require(
_isApprovedOrOwner(_msgSender(), AccountId),
"caller is not the owner of the Account token and is not approved either"
);
address destination = ownerOf(AccountId);
_withdrawBalancesTo(erc20s, destination);
}
/**
* @dev Withdraws ERC20 balances from this contract to `destination`, throws on any erc20 transfer() failure
* Emits a {SuccessfulWithdrawal} event upon success.
*
* @param erc20s A list of ERC20 tokens to withdraw NFT balances from
* @param destination The address to send all the NFT's ERC20 balances to
*
* @notice This function is access controlled, only the owner or an approved msg.sender may call this function
*/
function withdrawBalancesTo(
address[] calldata erc20s,
address destination
) public virtual {
require(
_isApprovedOrOwner(_msgSender(), AccountId),
"caller is not the owner of the Account token and is not approved either"
);
_withdrawBalancesTo(erc20s, destination);
}
/**
* @dev Internal withdrawal used because withdrawBalances cannot call withdrawBalancesTo without error
*
* @param erc20s A list of ERC20 tokens to withdraw NFT balances from
* @param destination The address to send all the NFT's ERC20 balances to
*/
function _withdrawBalancesTo(
address[] calldata erc20s,
address destination
) internal {
uint256[] memory amounts = new uint256[](erc20s.length);
for (uint i = 0; i < erc20s.length; i++) {
address erc20 = erc20s[i];
uint256 balance = IERC20(erc20).balanceOf(address(this));
if (balance > 0) {
bool result = IERC20(erc20).transfer(destination, balance);
require(result, "unsuccessful withdrawal");
amounts[i] = balance;
}
}
emit SuccessfulWithdrawal(destination, erc20s, amounts);
}
/**
* @dev Begins the Liquid Infrastructure Account recovery process, which must be detected by the x/microtx module.
* Emits a {TryRecover} event which must be detected by the x/microtx module.
* Expected behavior is that all tokens held in the x/bank account of the Liquid Account will be
* converted to ERC20s and transferred to the control of this contract. If the recovery is successful
* then the x/microtx module will append a {SuccessfulRecovery} event with the ERC20 addresses and amounts
* sent to this contract.
*
* After a successful recovery, use withdrawBalances(erc20s) to send the token balances to the owner account.
*
* @notice Due to the EVM <> Cosmos interactions, the tokens will not be transferred to this contract until
* the entire transaction is resolved. It will not be possible to recoverAccount() and immediately withdrawBalances()
* in the same transaction!
*
* @notice This function is access controlled, only the owner may call this function
*/
function recoverAccount() public virtual onlyOwner(AccountId) {
emit TryRecover();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a / b + (a % b == 0 ? 0 : 1);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
//SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.19; // Force solidity compliance
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
/**
* An abstract contract which provides onlyOwner(id) and onlyOwnerOrApproved(id) modifiers derived from ERC721's
* onwerOf, getApproved, and isApprovedForAll functions
*
* @dev For contracts with manually enumerated tokens (e.g. RockId = 1, PaperId = 2, ScissorsId = 3) use the modifiers like so:
* ```
* // Only the owner of RockId gets to use this function, regardless of approval status
* function throwRock() public onlyOwner(RockId) { ... }
*
* // Either the owner, a sender approved for all the tokens the owner of PaperId, or a sender approved for specifically PaperId gets to call this
* function wrapWithPaper() public onlyOwnerOrApproved(PaperId) { ... }
* ```
*/
abstract contract OwnableApprovableERC721 is Context, ERC721 {
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner(uint256 tokenId) {
require(
ERC721(this).ownerOf(tokenId) == _msgSender(),
"OwnableApprovable: caller is not the owner"
);
_;
}
/**
* @dev Throws if called by any account other than the owner or someone approved by the owner
*/
modifier onlyOwnerOrApproved(uint256 tokenId) {
// Get approval directly from ERC721's internal method
if (_isApprovedOrOwner(_msgSender(), tokenId)) {
_;
} else {
revert("OwnableApprovable: caller is not owner nor approved");
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.4.22 <0.9.0;
library console {
address constant CONSOLE_ADDRESS =
0x000000000000000000636F6e736F6c652e6c6f67;
function _sendLogPayloadImplementation(bytes memory payload) internal view {
address consoleAddress = CONSOLE_ADDRESS;
/// @solidity memory-safe-assembly
assembly {
pop(
staticcall(
gas(),
consoleAddress,
add(payload, 32),
mload(payload),
0,
0
)
)
}
}
function _castToPure(
function(bytes memory) internal view fnIn
) internal pure returns (function(bytes memory) pure fnOut) {
assembly {
fnOut := fnIn
}
}
function _sendLogPayload(bytes memory payload) internal pure {
_castToPure(_sendLogPayloadImplementation)(payload);
}
function log() internal pure {
_sendLogPayload(abi.encodeWithSignature("log()"));
}
function logInt(int256 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(int256)", p0));
}
function logUint(uint256 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256)", p0));
}
function logString(string memory p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function logBool(bool p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function logAddress(address p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function logBytes(bytes memory p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
}
function logBytes1(bytes1 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
}
function logBytes2(bytes2 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
}
function logBytes3(bytes3 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
}
function logBytes4(bytes4 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
}
function logBytes5(bytes5 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
}
function logBytes6(bytes6 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
}
function logBytes7(bytes7 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
}
function logBytes8(bytes8 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
}
function logBytes9(bytes9 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
}
function logBytes10(bytes10 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
}
function logBytes11(bytes11 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
}
function logBytes12(bytes12 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
}
function logBytes13(bytes13 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
}
function logBytes14(bytes14 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
}
function logBytes15(bytes15 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
}
function logBytes16(bytes16 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
}
function logBytes17(bytes17 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
}
function logBytes18(bytes18 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
}
function logBytes19(bytes19 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
}
function logBytes20(bytes20 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
}
function logBytes21(bytes21 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
}
function logBytes22(bytes22 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
}
function logBytes23(bytes23 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
}
function logBytes24(bytes24 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
}
function logBytes25(bytes25 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
}
function logBytes26(bytes26 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
}
function logBytes27(bytes27 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
}
function logBytes28(bytes28 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
}
function logBytes29(bytes29 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
}
function logBytes30(bytes30 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
}
function logBytes31(bytes31 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
}
function logBytes32(bytes32 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
}
function log(uint256 p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256)", p0));
}
function log(string memory p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function log(bool p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function log(address p0) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function log(uint256 p0, uint256 p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256)", p0, p1));
}
function log(uint256 p0, string memory p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string)", p0, p1));
}
function log(uint256 p0, bool p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool)", p0, p1));
}
function log(uint256 p0, address p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address)", p0, p1));
}
function log(string memory p0, uint256 p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256)", p0, p1));
}
function log(string memory p0, string memory p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
}
function log(string memory p0, bool p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
}
function log(string memory p0, address p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
}
function log(bool p0, uint256 p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256)", p0, p1));
}
function log(bool p0, string memory p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
}
function log(bool p0, bool p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
}
function log(bool p0, address p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
}
function log(address p0, uint256 p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256)", p0, p1));
}
function log(address p0, string memory p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
}
function log(address p0, bool p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
}
function log(address p0, address p1) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
}
function log(uint256 p0, uint256 p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256)", p0, p1, p2));
}
function log(uint256 p0, uint256 p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string)", p0, p1, p2));
}
function log(uint256 p0, uint256 p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool)", p0, p1, p2));
}
function log(uint256 p0, uint256 p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address)", p0, p1, p2));
}
function log(uint256 p0, string memory p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256)", p0, p1, p2));
}
function log(uint256 p0, string memory p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string)", p0, p1, p2));
}
function log(uint256 p0, string memory p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool)", p0, p1, p2));
}
function log(uint256 p0, string memory p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address)", p0, p1, p2));
}
function log(uint256 p0, bool p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256)", p0, p1, p2));
}
function log(uint256 p0, bool p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string)", p0, p1, p2));
}
function log(uint256 p0, bool p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool)", p0, p1, p2));
}
function log(uint256 p0, bool p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address)", p0, p1, p2));
}
function log(uint256 p0, address p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256)", p0, p1, p2));
}
function log(uint256 p0, address p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string)", p0, p1, p2));
}
function log(uint256 p0, address p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool)", p0, p1, p2));
}
function log(uint256 p0, address p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address)", p0, p1, p2));
}
function log(string memory p0, uint256 p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256)", p0, p1, p2));
}
function log(string memory p0, uint256 p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string)", p0, p1, p2));
}
function log(string memory p0, uint256 p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool)", p0, p1, p2));
}
function log(string memory p0, uint256 p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address)", p0, p1, p2));
}
function log(string memory p0, string memory p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256)", p0, p1, p2));
}
function log(string memory p0, string memory p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
}
function log(string memory p0, string memory p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
}
function log(string memory p0, string memory p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
}
function log(string memory p0, bool p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256)", p0, p1, p2));
}
function log(string memory p0, bool p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
}
function log(string memory p0, bool p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
}
function log(string memory p0, bool p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
}
function log(string memory p0, address p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256)", p0, p1, p2));
}
function log(string memory p0, address p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
}
function log(string memory p0, address p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
}
function log(string memory p0, address p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
}
function log(bool p0, uint256 p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256)", p0, p1, p2));
}
function log(bool p0, uint256 p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string)", p0, p1, p2));
}
function log(bool p0, uint256 p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool)", p0, p1, p2));
}
function log(bool p0, uint256 p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address)", p0, p1, p2));
}
function log(bool p0, string memory p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256)", p0, p1, p2));
}
function log(bool p0, string memory p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
}
function log(bool p0, string memory p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
}
function log(bool p0, string memory p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
}
function log(bool p0, bool p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256)", p0, p1, p2));
}
function log(bool p0, bool p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
}
function log(bool p0, bool p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
}
function log(bool p0, bool p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
}
function log(bool p0, address p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256)", p0, p1, p2));
}
function log(bool p0, address p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
}
function log(bool p0, address p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
}
function log(bool p0, address p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
}
function log(address p0, uint256 p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256)", p0, p1, p2));
}
function log(address p0, uint256 p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string)", p0, p1, p2));
}
function log(address p0, uint256 p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool)", p0, p1, p2));
}
function log(address p0, uint256 p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address)", p0, p1, p2));
}
function log(address p0, string memory p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256)", p0, p1, p2));
}
function log(address p0, string memory p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
}
function log(address p0, string memory p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
}
function log(address p0, string memory p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
}
function log(address p0, bool p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256)", p0, p1, p2));
}
function log(address p0, bool p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
}
function log(address p0, bool p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
}
function log(address p0, bool p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
}
function log(address p0, address p1, uint256 p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256)", p0, p1, p2));
}
function log(address p0, address p1, string memory p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
}
function log(address p0, address p1, bool p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
}
function log(address p0, address p1, address p2) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
}
function log(uint256 p0, uint256 p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256,string)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256,address)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string,string)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string,address)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool,string)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool,address)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address,string)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, uint256 p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address,address)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256,string)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256,address)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string,string)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string,address)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool,string)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool,address)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address,string)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, string memory p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address,address)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256,string)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256,address)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string,string)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string,address)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool,string)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool,address)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address,string)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, bool p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address,address)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256,string)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256,address)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string,string)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string,address)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool,string)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool,address)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address,uint256)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address,string)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address,bool)", p0, p1, p2, p3));
}
function log(uint256 p0, address p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint256 p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint256)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256,uint256)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256,string)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256,address)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string,uint256)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string,string)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string,address)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool,uint256)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address,uint256)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address,string)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint256 p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256,uint256)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint256)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint256)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint256)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256,uint256)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint256)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint256)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint256)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256,uint256)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint256)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint256)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint256)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256,uint256)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256,string)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256,bool)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256,address)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string,uint256)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string,string)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string,bool)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string,address)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool,uint256)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool,string)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool,address)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address,uint256)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address,string)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address,bool)", p0, p1, p2, p3));
}
function log(address p0, uint256 p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256,uint256)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint256)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint256)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint256)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256,uint256)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint256)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint256)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint256)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint256 p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256,uint256)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint256 p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint256 p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint256 p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint256)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint256)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, uint256 p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint256)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, string memory p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, bool p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, address p3) internal pure {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
}
}
{
"compilationTarget": {
"contracts/LiquidInfrastructureERC20.sol": "LiquidInfrastructureERC20"
},
"evmVersion": "paris",
"libraries": {},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": true,
"runs": 1000000
},
"remappings": []
}
[{"inputs":[{"internalType":"string","name":"_name","type":"string"},{"internalType":"string","name":"_symbol","type":"string"},{"internalType":"address[]","name":"_approvedHolders","type":"address[]"},{"internalType":"address[]","name":"_distributableErc20s","type":"address[]"},{"internalType":"address","name":"_multiclaim","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"nft","type":"address"}],"name":"AddManagedNFT","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"holder","type":"address"}],"name":"ClaimRevenue","type":"event"},{"anonymous":false,"inputs":[],"name":"Deployed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"nft","type":"address"},{"indexed":false,"internalType":"address","name":"to","type":"address"}],"name":"ReleaseManagedNFT","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"holder","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Stake","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"holder","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Unstake","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"source","type":"address"}],"name":"Withdrawal","type":"event"},{"anonymous":false,"inputs":[],"name":"WithdrawalFinished","type":"event"},{"anonymous":false,"inputs":[],"name":"WithdrawalStarted","type":"event"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"HolderAllowlist","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"ManagedNFTs","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"Version","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"newERC20","type":"address"}],"name":"addDistributableERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"nftContract","type":"address"}],"name":"addManagedNFT","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"holder","type":"address"}],"name":"approveHolder","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"claimRevenue","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"staker","type":"address"}],"name":"claimRevenueFor","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"holder","type":"address"}],"name":"disapproveHolder","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"staker","type":"address"}],"name":"estimateRevenueFor","outputs":[{"internalType":"uint256[]","name":"","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getDistributableERC20s","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getManagedNFTs","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"holder","type":"address"}],"name":"getStake","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"isApprovedHolder","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mintStaked","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"multiclaim","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"bytes","name":"","type":"bytes"}],"name":"onERC721Received","outputs":[{"internalType":"bytes4","name":"","type":"bytes4"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"nftContract","type":"address"},{"internalType":"address","name":"to","type":"address"}],"name":"releaseManagedNFT","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"nft","type":"address"},{"internalType":"address[]","name":"newErc20s","type":"address[]"},{"internalType":"uint256[]","name":"newAmounts","type":"uint256[]"}],"name":"setManagedNFTThresholds","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"stake","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalStake","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"recipient","type":"address"}],"name":"transferNondistributableERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"unstake","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"withdrawFromAllManagedNFTs","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"numWithdrawals","type":"uint256"}],"name":"withdrawFromManagedNFTs","outputs":[],"stateMutability":"nonpayable","type":"function"}]