CHUNKS

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

//SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/utils/math/SafeMath.sol';
import '@openzeppelin/contracts/utils/Address.sol';
import "./ISwapContract.sol";


contract CHUNKS is Context, IERC20, Ownable {
    using SafeMath for uint256;
    using Address for address;

    mapping(address => uint256) private _rOwned;
    mapping(address => uint256) private _tOwned;
    mapping(address => mapping(address => uint256)) private _allowances;
    mapping(address => bool) public whiteList;

    mapping(address => bool) private _isExcludedFromFee;
    mapping(address => bool) private _isExcluded;
    address[] private _excluded;

    uint256 private constant MAX = ~uint256(0);
    uint256 private _tTotal = 500_000_000 * 1 ether;
    uint256 private _rTotal = (MAX - (MAX % _tTotal));
    uint256 private _tFeeTotal;
    bool public commissionActive = false;
    bool public whitListEnabled = false;

    string private _name = 'CHUNKS';
    string private _symbol = 'CHUNKS';
    uint8 private _decimals = 18;

    // Buy Fees
    uint256 public _liquidityFee = 50;
    uint256 public _reflectionFee = 100;
    uint256 public _nftHolderFee = 100;
    uint256 public _treasuryFee = 500;
    uint256 public _burnFee = 50;

    // Sell Fees
    uint256 public _sellLiquidityFee = 100;
    uint256 public _sellReflectionFee = 100;
    uint256 public _sellNftHoldersFee = 100;
    uint256 public _sellTreasuryFee = 400;
    uint256 public _sellBurnFee = 100;

    // FeeWallets

    address public liqGOBWallet;
    address public treasuryWallet;
    address public ambassadorPoolWallet;
    address public rewardsWallet;
    address public marketingWallet;
    address public nftHoldersPoolWallet;

    // current fee
    uint256 public _mainReflectionFee = 0;
    uint256 public _mainBurnFee = 0;
    uint256 public _mainLiquidityFee = 0;

    SwapContractInterface public swapper;
    // Anti whale
    uint256 public constant MAX_HOLDING_PERCENTS_DIVISOR = 10000;
    uint256 public constant PERCENTS_DIVISOR = 10000;
    uint256 public _maxHoldingPercents = 50;
    bool public antiWhaleEnabled;

    bool public sellIsActive;

    // Anti bot
    mapping(uint256 => bool) allowedBuyAmount;
    bool public antiBotEnabled;

    bool inSwapAndLiquify;
    bool public swapAndLiquifyEnabled = false;
    uint256 private numTokensSellToAddToLiquidity = 100000 * 10**18;

    event SwapAndLiquifyEnabledUpdated(bool enabled);
    event SwapAndLiquify(
        uint256 tokensSwapped,
        uint256 ethReceived,
        uint256 tokensIntoLiqudity
    );

    error SellIsNotActive();

    modifier lockTheSwap() {
        inSwapAndLiquify = true;
        _;
        inSwapAndLiquify = false;
    }

    constructor(
    ) {
        sellIsActive = false;
        _rOwned[_msgSender()] = _rTotal;

        _isExcludedFromFee[owner()] = true;
        _isExcludedFromFee[address(this)] = true;

        emit Transfer(address(0), _msgSender(), _tTotal);
    }

    function setSwapContract(address _address) public onlyOwner {
        swapper = SwapContractInterface(_address);
    }

    function setCommissionActive(bool _state) public onlyOwner {
        commissionActive = _state;
    }

    function activateSell() public onlyOwner {
        sellIsActive = true;
    }

    function setMarketingWallet(address newWallet) external onlyOwner {
        marketingWallet = newWallet;
    }

    function setNftHoldersPoolWallet(address newWallet) external onlyOwner {
        nftHoldersPoolWallet = newWallet;
    }

    function setRewardWallet(address newWallet) external onlyOwner {
        rewardsWallet = newWallet;
    }

    function setTreasuryWallet(address newWallet) external onlyOwner {
        treasuryWallet = newWallet;
    }

    function setAmbassadorPoolWallet(address newWallet) external onlyOwner {
        ambassadorPoolWallet = newWallet;
    }

    function setLiqGOBWallet(address newWallet) external onlyOwner {
        liqGOBWallet = newWallet;
    }

    function setLiqBuyFee(uint256 fee) public onlyOwner {
        _liquidityFee = fee;
    }

    function setLiqSellFee(uint256 fee) public onlyOwner {
        _sellLiquidityFee = fee;
    }

    function setReflectionBuyFee(uint256 fee) public onlyOwner {
        _reflectionFee = fee;
    }

    function setReflectionSellFee(uint256 fee) public onlyOwner {
        _sellReflectionFee = fee;
    }

    function setNftBuyFee(uint256 fee) public onlyOwner {
        _nftHolderFee = fee;
    }

    function setNftSellFee(uint256 fee) public onlyOwner {
        _sellNftHoldersFee = fee;
    }

    function setTreasuryBuyFee(uint256 fee) public onlyOwner {
        _treasuryFee = fee;
    }

    function setTreasurySellFee(uint256 fee) public onlyOwner {
        _sellTreasuryFee = fee;
    }

    function setBurnBuyFee(uint256 fee) public onlyOwner {
        _burnFee = fee;
    }

    function setBurnSellFee(uint256 fee) public onlyOwner {
        _sellBurnFee = fee;
    }

    function name() public view returns (string memory) {
        return _name;
    }

    function symbol() public view returns (string memory) {
        return _symbol;
    }

    function decimals() public view returns (uint8) {
        return _decimals;
    }

    function totalSupply() public view override returns (uint256) {
        return _tTotal;
    }

    function balanceOf(address account) public view override returns (uint256) {
        if (_isExcluded[account]) return _tOwned[account];
        return tokenFromReflection(_rOwned[account]);
    }

    function transfer(address recipient, uint256 amount) public override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    function allowance(address owner, address spender)
    public
    view
    override
    returns (uint256)
    {
        return _allowances[owner][spender];
    }

    function approve(address spender, uint256 amount) public override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            _msgSender(),
            _allowances[sender][_msgSender()].sub(
                amount,
                'BEP20: transfer amount exceeds allowance'
            )
        );
        return true;
    }

    function increaseAllowance(address spender, uint256 addedValue)
    public
    virtual
    returns (bool)
    {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].add(addedValue)
        );
        return true;
    }

    function decreaseAllowance(address spender, uint256 subtractedValue)
    public
    virtual
    returns (bool)
    {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].sub(
                subtractedValue,
                'BEP20: decreased allowance below zero'
            )
        );
        return true;
    }

    function isExcludedFromReward(address account) public view returns (bool) {
        return _isExcluded[account];
    }

    function totalFees() public view returns (uint256) {
        return _tFeeTotal;
    }

    function deliver(uint256 tAmount) public {
        address sender = _msgSender();
        require(!_isExcluded[sender], 'Excluded addresses cannot call this function');
        (uint256 rAmount, , , , , ) = _getValues(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rTotal = _rTotal.sub(rAmount);
        _tFeeTotal = _tFeeTotal.add(tAmount);
    }

    function reflectionFromToken(uint256 tAmount, bool deductTransferFee)
    public
    view
    returns (uint256)
    {
        require(tAmount <= _tTotal, 'Amount must be less than supply');
        if (!deductTransferFee) {
            (uint256 rAmount, , , , , ) = _getValues(tAmount);
            return rAmount;
        } else {
            (, uint256 rTransferAmount, , , , ) = _getValues(tAmount);
            return rTransferAmount;
        }
    }

    function tokenFromReflection(uint256 rAmount) public view returns (uint256) {
        require(rAmount <= _rTotal, 'Amount must be less than total reflections');
        uint256 currentRate = _getRate();
        return rAmount.div(currentRate);
    }

    function excludeFromReward(address account) public onlyOwner {
        require(!_isExcluded[account], 'Account is already excluded');
        if (_rOwned[account] > 0) {
            _tOwned[account] = tokenFromReflection(_rOwned[account]);
        }
        _isExcluded[account] = true;
        _excluded.push(account);
    }

    function includeInReward(address account) external onlyOwner {
        require(_isExcluded[account], 'Account is already excluded');
        for (uint256 i = 0; i < _excluded.length; i++) {
            if (_excluded[i] == account) {
                _excluded[i] = _excluded[_excluded.length - 1];
                _tOwned[account] = 0;
                _isExcluded[account] = false;
                _excluded.pop();
                break;
            }
        }
    }

    function _transferBothExcluded(
        address sender,
        address recipient,
        uint256 tAmount
    ) private {
        (
        uint256 rAmount,
        uint256 rTransferAmount,
        uint256 rFee,
        uint256 tTransferAmount,
        uint256 tFee,
        uint256 tLiquidity
        ) = _getValues(tAmount);
        _tOwned[sender] = _tOwned[sender].sub(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _takeLiquidity(tLiquidity);
        _reflectFee(rFee, tFee);
        emit Transfer(sender, recipient, tTransferAmount);
    }

    function _reflectFee(uint256 rFee, uint256 tFee) private {
        _rTotal = _rTotal.sub(rFee);
        _tFeeTotal = _tFeeTotal.add(tFee);
    }

    function _getValues(uint256 tAmount)
    private
    view
    returns (
        uint256,
        uint256,
        uint256,
        uint256,
        uint256,
        uint256
    )
    {
        (uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getTValues(
            tAmount
        );
        (uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
            tAmount,
            tFee,
            tLiquidity,
            _getRate()
        );
        return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity);
    }

    function _getTValues(uint256 tAmount)
    private
    view
    returns (
        uint256,
        uint256,
        uint256
    )
    {
        uint256 tFee = calculateTaxFee(tAmount);
        uint256 tLiquidity = calculateLiquidityFee(tAmount);
        uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
        return (tTransferAmount, tFee, tLiquidity);
    }

    function _getRValues(
        uint256 tAmount,
        uint256 tFee,
        uint256 tLiquidity,
        uint256 currentRate
    )
    private
    pure
    returns (
        uint256,
        uint256,
        uint256
    )
    {
        uint256 rAmount = tAmount.mul(currentRate);
        uint256 rFee = tFee.mul(currentRate);
        uint256 rLiquidity = tLiquidity.mul(currentRate);
        uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity);
        return (rAmount, rTransferAmount, rFee);
    }

    function _getRate() private view returns (uint256) {
        (uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
        return rSupply.div(tSupply);
    }

    function _getCurrentSupply() private view returns (uint256, uint256) {
        uint256 rSupply = _rTotal;
        uint256 tSupply = _tTotal;
        for (uint256 i = 0; i < _excluded.length; i++) {
            if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply)
                return (_rTotal, _tTotal);
            rSupply = rSupply.sub(_rOwned[_excluded[i]]);
            tSupply = tSupply.sub(_tOwned[_excluded[i]]);
        }
        if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
        return (rSupply, tSupply);
    }

    function _takeLiquidity(uint256 tLiquidity) private {
        uint256 currentRate = _getRate();
        uint256 rLiquidity = tLiquidity.mul(currentRate);
        _rOwned[address(swapper)] = _rOwned[address(swapper)].add(rLiquidity);
        if (_isExcluded[address(swapper)])
            _tOwned[address(swapper)] = _tOwned[address(swapper)].add(tLiquidity);
    }

    function calculateTaxFee(uint256 _amount) private view returns (uint256) {
        return _amount.mul(_mainReflectionFee).div(PERCENTS_DIVISOR);
    }

    function calculateLiquidityFee(uint256 _amount) private view returns (uint256) {
        return _amount.mul(_mainLiquidityFee).div(PERCENTS_DIVISOR);
    }

    function activateSellFee() private {
        _mainReflectionFee = _sellReflectionFee;
        _mainLiquidityFee = _sellLiquidityFee;
        _mainBurnFee = _sellBurnFee;
    }

    function activateBuyFee() private {
        _mainReflectionFee = _reflectionFee;
        _mainLiquidityFee = _liquidityFee;
        _mainBurnFee = _burnFee;
    }

    function removeAllFee() private {
        _mainReflectionFee = 0;
        _mainLiquidityFee = 0;
        _mainBurnFee = 0;
    }

    function isExcludedFromFee(address account) public view returns (bool) {
        return _isExcludedFromFee[account];
    }

    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) private {
        require(owner != address(0), 'BEP20: approve from the zero address');
        require(spender != address(0), 'BEP20: approve to the zero address');

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    function swapAndLiquify(uint256 _amount) private lockTheSwap {
        swapper.swap(_amount);
    }

    function _transfer(
        address from,
        address to,
        uint256 amount
    ) private {
        require(from != address(0), 'ERC20: transfer from the zero address');
        require(amount > 0, 'Transfer amount must be greater than zero');

        // is the token balance of this contract address over the min number of
        // tokens that we need to initiate a swap + liquidity lock?
        // also, don't get caught in a circular liquidity event.
        // also, don't swap & liquify if sender is pancake pair.
        if (address(swapper) != address(0)) {
            uint256 contractTokenBalance = balanceOf(address(swapper));
            bool overMinTokenBalance = contractTokenBalance >= numTokensSellToAddToLiquidity;
            if (
                overMinTokenBalance &&
                !inSwapAndLiquify &&
                to == swapper.getPair() &&
                swapAndLiquifyEnabled
            ) {
                contractTokenBalance = numTokensSellToAddToLiquidity;
                //add liquidity
                swapAndLiquify(contractTokenBalance);
            }
        }

        //transfer amount, it will take tax, burn, liquidity fee
        _tokenTransfer(from, to, amount);

        if (antiWhaleEnabled) {
            uint256 maxAllowed = (_tTotal * _maxHoldingPercents) / MAX_HOLDING_PERCENTS_DIVISOR;
            if (address(swapper) != address(0)) {
                if (to == swapper.getPair()) {
                    require(
                        amount <= maxAllowed,
                        'Transacted amount exceed the max allowed value'
                    );
                } else {
                    require(
                        balanceOf(to) <= maxAllowed,
                        'Wallet balance exceeds the max limit'
                    );
                }
            } else {
                require(
                    balanceOf(to) <= maxAllowed,
                    'Wallet balance exceeds the max limit'
                );
            }
        }
    }

    //this method is responsible for taking all fee, if takeFee is true
    function _tokenTransfer(
        address sender,
        address recipient,
        uint256 amount
    ) private {
        if (!sellIsActive && sender == swapper.getPair()) revert SellIsNotActive();
        bool isSell = false;
        bool isBuy = false;
        if (recipient == swapper.getPair() && !_isExcludedFromFee[sender]) {
            activateSellFee();
            isSell = true;
        } else if (sender == swapper.getPair() && !_isExcludedFromFee[recipient]) {
            activateBuyFee();
            isBuy = true;
        }
        if (isSell || isBuy) {
            if (whitListEnabled) {
                require(whiteList[sender] || whiteList[recipient], 'Only white list user');
            }
            uint256 _burnAmount = amount.mul(_mainBurnFee).div(PERCENTS_DIVISOR);

            removeAllFee();

            _transferStandard(sender, address(0), _burnAmount);

            if (isBuy) {
                uint256 _treasuryAmount = amount.mul(_treasuryFee).div(PERCENTS_DIVISOR);
                uint256 _nftHolderAmount = amount.mul(_nftHolderFee).div(PERCENTS_DIVISOR);
                amount = amount.sub(_treasuryAmount).sub(_nftHolderAmount);

                _transferStandard(sender, treasuryWallet, _treasuryAmount);
                _transferStandard(sender, nftHoldersPoolWallet, _nftHolderAmount);
                activateBuyFee();
            } else {
                uint256 _sellTreasuryAmount = amount.mul(_sellTreasuryFee).div(PERCENTS_DIVISOR);
                uint256 _sellNftHoldersAmount = amount.mul(_sellNftHoldersFee).div(PERCENTS_DIVISOR);
                amount = amount.sub(_sellTreasuryAmount).sub(_sellNftHoldersAmount);

                _transferStandard(sender, treasuryWallet, _sellTreasuryAmount);
                _transferStandard(sender, nftHoldersPoolWallet, _sellNftHoldersAmount);
                activateSellFee();
            }
            amount = amount.sub(_burnAmount);
        }

        if (_isExcluded[sender] && !_isExcluded[recipient]) {
            _transferFromExcluded(
                sender,
                recipient,
                amount
            );
        } else if (!_isExcluded[sender] && _isExcluded[recipient]) {
            _transferToExcluded(
                sender,
                recipient,
                amount
            );
        } else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
            _transferStandard(sender, recipient, amount);
        } else if (_isExcluded[sender] && _isExcluded[recipient]) {
            _transferBothExcluded(
                sender,
                recipient,
                amount
            );
        } else {
            _transferStandard(sender, recipient, amount);
        }
        removeAllFee();
    }

    function _transferStandard(
        address sender,
        address recipient,
        uint256 tAmount
    ) private {
        (
        uint256 rAmount,
        uint256 rTransferAmount,
        uint256 rFee,
        uint256 tTransferAmount,
        uint256 tFee,
        uint256 tLiquidity
        ) = _getValues(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _takeLiquidity(tLiquidity);
        _reflectFee(rFee, tFee);
        emit Transfer(sender, recipient, tTransferAmount);
    }

    function _transferToExcluded(
        address sender,
        address recipient,
        uint256 tAmount
    ) private {
        (
        uint256 rAmount,
        uint256 rTransferAmount,
        uint256 rFee,
        uint256 tTransferAmount,
        uint256 tFee,
        uint256 tLiquidity
        ) = _getValues(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _takeLiquidity(tLiquidity);
        _reflectFee(rFee, tFee);
        emit Transfer(sender, recipient, tTransferAmount);
    }

    function _transferFromExcluded(
        address sender,
        address recipient,
        uint256 tAmount
    ) private {
        (
        uint256 rAmount,
        uint256 rTransferAmount,
        uint256 rFee,
        uint256 tTransferAmount,
        uint256 tFee,
        uint256 tLiquidity
        ) = _getValues(tAmount);
        _tOwned[sender] = _tOwned[sender].sub(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _takeLiquidity(tLiquidity);
        _reflectFee(rFee, tFee);
        emit Transfer(sender, recipient, tTransferAmount);
    }

    function excludeFromFee(address account) public onlyOwner {
        _isExcludedFromFee[account] = true;
    }

    function includeInFee(address account) public onlyOwner {
        _isExcludedFromFee[account] = false;
    }

    function setMaxHoldingPercents(uint256 maxHoldingPercents) external onlyOwner {
        _maxHoldingPercents = maxHoldingPercents;
    }

    function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
        swapAndLiquifyEnabled = _enabled;
        emit SwapAndLiquifyEnabledUpdated(_enabled);
    }

    function setWhiteListEnabled(bool _enabled) public onlyOwner {
        whitListEnabled = _enabled;
    }

    function addToWhiteList(address _user) public onlyOwner {
        whiteList[_user] = true;
    }

    function removeFromWhiteList(address _user) public onlyOwner {
        whiteList[_user] = false;
    }

    function addToWhiteListBatch(address[] memory _users) public onlyOwner {
        for (uint256 i = 0; i < _users.length; i++) {
            whiteList[_users[i]] = true;
        }
    }

    function removeFromWhiteListBatch(address[] memory _users) public onlyOwner {
        for (uint256 i = 0; i < _users.length; i++) {
            whiteList[_users[i]] = false;
        }
    }

    function setAntiWhale(bool enabled) external onlyOwner {
        antiWhaleEnabled = enabled;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface SwapContractInterface {

    function getPair() external view returns(address);

    function getRouter() external view returns(address);

    function swap(uint256 _amount) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

{
  "compilationTarget": {
    "contracts/CHUNKS.sol": "CHUNKS"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": [],
  "viaIR": true
}