// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// Author: Eric Gao (@itsoksami, https://github.com/Ericxgao)

pragma solidity ^0.8.4;

import "erc721a/contracts/ERC721A.sol";
import "./LinearDutchAuction.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "@openzeppelin/contracts/finance/PaymentSplitter.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "hardhat/console.sol";
contract BaseDutchAuctionERC721A is ERC721A, LinearDutchAuction, ReentrancyGuard {
    using Strings for uint256;
    using ECDSA for bytes32;

    string public prefix = "Sunday Journal Base Verification:";
    string public prefixDiscounted = "Sunday Journal Discounted Verification:";
    string private baseTokenURI = '';

    mapping(address => uint256) private _whitelistClaimed;
    mapping(address => uint256) private _publicListClaimed;

    uint256 public whitelistMaxMint;
    uint256 public publicListMaxMint;
    uint256 public nonReservedMax;
    uint256 public reservedMax;
    uint256 public max;
    uint256 public nonReservedMinted;
    uint256 public reservedMinted;
    uint256 public discountedPrice;

    PaymentSplitter private _splitter;
    bool public isAllowedRefund;
    bool public allowPublicRefunds;
    bool allowWhitelistRefunds;
    bool allowDiscountRefunds;
    uint256 public isRefund;
    uint256 public refundPrice;
    uint256 public totalMintsForRefund;
    mapping(address => uint256) publicPurchasePrices;
    mapping(address => uint256) whitelistPurchasePrices;
    mapping(address => uint256) discountedPurchasePrices;

    mapping(address => uint256) private _discountClaimed;
    
    uint64 private constant decreaseInterval = 900;
    uint64 private constant numDecreases = 9;
    uint64 private constant startPrice = 5 ether;
    uint64 private constant decreaseSize = 0.5 ether;

    uint256 public publicTotalMaxMint;
    uint256 public publicTotalMinted;
    constructor(
        address[] memory payees, 
        uint256[] memory shares,
        string memory name,
        string memory symbol,
        uint256 _whitelistMaxMint, 
        uint256 _publicListMaxMint,
        uint256 _nonReservedMax,
        uint256 _reservedMax,
        uint256 _discountedPrice,
        uint256 _publicTotalMaxMint
    )
        ERC721A(name, symbol, 5)
        LinearDutchAuction(
            LinearDutchAuction.DutchAuctionConfig({
                startPoint: 0, // disabled at deployment
                startPrice: startPrice,
                unit: AuctionIntervalUnit.Time,
                decreaseInterval: decreaseInterval, // 15 minutes
                decreaseSize: decreaseSize,
                numDecreases: numDecreases
            }),
            .5 ether
        )
    {
        whitelistMaxMint = _whitelistMaxMint;
        publicListMaxMint = _publicListMaxMint;
        nonReservedMax = _nonReservedMax;
        reservedMax = _reservedMax;
        max = nonReservedMax + reservedMax;
        nonReservedMinted = 0;
        reservedMinted = 0;
        discountedPrice = _discountedPrice;
        publicTotalMaxMint = _publicTotalMaxMint;
        _splitter = new PaymentSplitter(payees, shares);
    }

    function release(address payable account) external {
        _splitter.release(account);
    }

    function _hash(string memory _prefix, address _address) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(_prefix, _address));
    }

    function _verify(bytes32 hash, bytes memory signature) internal view returns (bool) {
        return (_recover(hash, signature) == owner());
    }

    function _recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        return hash.recover(signature);
    }

    function setPrefix(string memory _prefix) public onlyOwner {
        prefix = _prefix;
    }

    function setPrefixDiscounted(string memory _prefix) public onlyOwner {
        prefixDiscounted = _prefix;
    }

    function setWhitelistMaxMint(uint256 _whitelistMaxMint) external onlyOwner {
        whitelistMaxMint = _whitelistMaxMint;
    }

    function setPublicListMaxMint(uint256 _publicListMaxMint) external onlyOwner {
        publicListMaxMint = _publicListMaxMint;
    }

    function mintPublic(uint256 numberOfTokens) external payable {
        require(_publicListClaimed[msg.sender] + _whitelistClaimed[msg.sender] + numberOfTokens <= publicListMaxMint, 'You cannot mint this many.');
        
        publicTotalMinted += numberOfTokens;
        require(publicTotalMinted <= publicTotalMaxMint, "exceed amount");

        _publicListClaimed[msg.sender] += numberOfTokens;
        _nonReservedMintHelper(numberOfTokens, true);
    }
    
    function mintWhitelist(bytes32 hash, bytes memory signature, uint256 numberOfTokens) external payable {
        require(_verify(hash, signature), "This hash's signature is invalid.");
        require(_hash(prefix, msg.sender) == hash, "The address hash does not match the signed hash.");
        require(_whitelistClaimed[msg.sender] + numberOfTokens <= whitelistMaxMint, 'You cannot mint this many.');

        _whitelistClaimed[msg.sender] += numberOfTokens;
        _nonReservedMintHelper(numberOfTokens, false);
    }

    function _nonReservedMintHelper(uint256 numberOfTokens, bool isPublic) internal nonReentrant {
        require(totalSupply() + numberOfTokens <= max, "Sold out.");
        uint256 price = cost(numberOfTokens);
        require(price <= msg.value, "Invalid amount.");

        _safeMint(msg.sender, numberOfTokens);

        totalMintsForRefund += numberOfTokens;
        if (isPublic) {
            publicPurchasePrices[msg.sender] += price;
        } else {
            whitelistPurchasePrices[msg.sender] += price;
        }

        if (msg.value > price) {
            address payable reimburse = payable(_msgSender());
            uint256 refundAmount = msg.value - price;

            // Using Address.sendValue() here would mask the revertMsg upon
            // reentrancy, but we want to expose it to allow for more precise
            // testing. This otherwise uses the exact same pattern as
            // Address.sendValue().
            (bool success, bytes memory returnData) = reimburse.call{
                value: refundAmount
            }("");
            // Although `returnData` will have a spurious prefix, all we really
            // care about is that it contains the ReentrancyGuard reversion
            // message so we can check in the tests.
            require(success, string(returnData));
        }
    }

    function splitPayments(uint256 _amount) public payable onlyOwner {
        (bool success, ) = payable(_splitter).call{value: _amount}(
        ""
        );
        require(success, "transfer failed");
    }

    function mintReserved(uint256 quantity) external onlyOwner {
        require(
            totalSupply() + quantity <= reservedMax,
            "Sold out."
        );

        if (quantity < maxBatchSize) {
            _safeMint(msg.sender, quantity);
        } else {
            require(
                quantity % maxBatchSize == 0,
                "Can only mint a multiple of the maxBatchSize."
            );
            uint256 numChunks = quantity / maxBatchSize;
            for (uint256 i = 0; i < numChunks; i++) {
                _safeMint(msg.sender, maxBatchSize);
            }
        }
    }

    function mintWhitelistDiscounted(bytes32 hash, bytes memory signature, uint256 numberOfTokens) external payable {
        require(_verify(hash, signature), "This hash's signature is invalid.");
        require(_hash(prefixDiscounted, msg.sender) == hash, "The address hash does not match the signed hash.");
        require(_whitelistClaimed[msg.sender] + numberOfTokens <= whitelistMaxMint, 'You cannot mint this many.');
        require(discountedPrice * numberOfTokens == msg.value, "Invalid amount.");

        _whitelistClaimed[msg.sender] += numberOfTokens;
        _discountClaimed[msg.sender] += numberOfTokens;
        
        totalMintsForRefund += numberOfTokens;
        discountedPurchasePrices[msg.sender] += msg.value;
        
        _safeMint(msg.sender, numberOfTokens);
    }

    function setBaseURI(string memory baseTokenURI_) external onlyOwner {
        baseTokenURI = baseTokenURI_;
    }

    function tokenURI(uint256 tokenId)
        public
        view
        override
        returns (string memory)
    {
        return string(abi.encodePacked(baseTokenURI, tokenId.toString()));
    }

    function setRefundPrice(uint256 _price) external onlyOwner {
        refundPrice = _price;
    }

    function setAllowPublicRefunds(bool _allow) external onlyOwner {
        allowPublicRefunds = _allow;
    }

    function setAllowWhitelistRefunds(bool _allow) external onlyOwner {
        allowWhitelistRefunds = _allow;
    }
   
    function setAllowDiscountRefunds(bool _allow) external onlyOwner {
        allowDiscountRefunds = _allow;
    }

    function allowRefund(bool _allow) external onlyOwner {
        isAllowedRefund = _allow;
    }

    function getRefundTotal() external view returns(uint256) {
        require(isAllowedRefund, "refund not allowed");
        return totalMintsForRefund * refundPrice;
    }

    function getPublicRefundAmount() external view returns(uint256) {
        if (allowPublicRefunds && (publicPurchasePrices[msg.sender] > _publicListClaimed[msg.sender] * refundPrice)) {
            return publicPurchasePrices[msg.sender] - _publicListClaimed[msg.sender] * refundPrice;
            
        }
        return 0;
    }

    function getWhitelistRefundAmount() external view returns(uint256) {
        if (allowWhitelistRefunds && (whitelistPurchasePrices[msg.sender] > (_whitelistClaimed[msg.sender] - _discountClaimed[msg.sender]) * refundPrice)) {
            return whitelistPurchasePrices[msg.sender] - (_whitelistClaimed[msg.sender] - _discountClaimed[msg.sender]) * refundPrice;
        }
        return 0;
    }
    
    function getDiscountRefundAmount() external view returns(uint256) {
        if (allowDiscountRefunds && (discountedPurchasePrices[msg.sender] > _discountClaimed[msg.sender] * refundPrice)) {
            return discountedPurchasePrices[msg.sender] - _discountClaimed[msg.sender] * refundPrice;
        }
        return 0;
    }

    function refund() external nonReentrant {
        require(isAllowedRefund == true, "refund not allowed");
        uint256 amount;
        
        if (allowPublicRefunds && (publicPurchasePrices[msg.sender] > _publicListClaimed[msg.sender] * refundPrice)) {
            amount = publicPurchasePrices[msg.sender] - _publicListClaimed[msg.sender] * refundPrice;
            publicPurchasePrices[msg.sender] = 0;
            totalMintsForRefund = totalMintsForRefund - _publicListClaimed[msg.sender];
        }

        if (allowWhitelistRefunds && (whitelistPurchasePrices[msg.sender] > (_whitelistClaimed[msg.sender] - _discountClaimed[msg.sender]) * refundPrice)) {
            amount += whitelistPurchasePrices[msg.sender] - (_whitelistClaimed[msg.sender] - _discountClaimed[msg.sender]) * refundPrice;
            whitelistPurchasePrices[msg.sender] = 0;
            totalMintsForRefund = totalMintsForRefund - (_whitelistClaimed[msg.sender] - _discountClaimed[msg.sender]);
        }

        if (allowDiscountRefunds && (discountedPurchasePrices[msg.sender] > _discountClaimed[msg.sender] * refundPrice)) {
            amount += discountedPurchasePrices[msg.sender] - _discountClaimed[msg.sender] * refundPrice;
            discountedPurchasePrices[msg.sender] = 0;
            totalMintsForRefund = totalMintsForRefund - _discountClaimed[msg.sender];
        }
        
        require(amount != 0, "no refunds");
        (bool success, ) = payable(msg.sender).call{value: amount}("");
        require(success == true, "failed to refund");
    }

    function canWhitelistMint(uint256 numberOfTokens) external view returns(bool) {
        return _whitelistClaimed[msg.sender] + numberOfTokens <= whitelistMaxMint;
    }

    function getStartPrice() external view onlyOwner returns(uint64) {
        return startPrice;
    }

    function getDecreaseInterval() external view onlyOwner returns(uint64) {
        return decreaseInterval;
    }

    function getNumDescreases() external view onlyOwner returns(uint64) {
        return numDecreases;
    }

    function getDecreaseSize() external view onlyOwner returns(uint64) {
        return decreaseSize;
    }

    function getPublicMinted() external view returns(uint256) {
        return _publicListClaimed[msg.sender];
    }
    
    function getWhitelistMinted() external view returns(uint256) {
        return _whitelistClaimed[msg.sender];
    }
    
    function setPublicTotalMaxMint(uint256 _amount) external onlyOwner {
        publicTotalMaxMint = _amount;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        // Check the signature length
        // - case 65: r,s,v signature (standard)
        // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return recover(hash, v, r, s);
        } else if (signature.length == 64) {
            bytes32 r;
            bytes32 vs;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {
                r := mload(add(signature, 0x20))
                vs := mload(add(signature, 0x40))
            }
            return recover(hash, r, vs);
        } else {
            revert("ECDSA: invalid signature length");
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        bytes32 s;
        uint8 v;
        assembly {
            s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
            v := add(shr(255, vs), 27)
        }
        return recover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`, `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        require(
            uint256(s) <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0,
            "ECDSA: invalid signature 's' value"
        );
        require(v == 27 || v == 28, "ECDSA: invalid signature 'v' value");

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        require(signer != address(0), "ECDSA: invalid signature");

        return signer;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// Creator: Chiru Labs

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
 *
 * Assumes serials are sequentially minted starting at 0 (e.g. 0, 1, 2, 3..).
 *
 * Does not support burning tokens to address(0).
 */
contract ERC721A is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
    using Address for address;
    using Strings for uint256;

    struct TokenOwnership {
        address addr;
        uint64 startTimestamp;
    }

    struct AddressData {
        uint128 balance;
        uint128 numberMinted;
    }

    uint256 private currentIndex = 0;

    uint256 internal immutable maxBatchSize;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to ownership details
    // An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
    mapping(uint256 => TokenOwnership) private _ownerships;

    // Mapping owner address to address data
    mapping(address => AddressData) private _addressData;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev
     * `maxBatchSize` refers to how much a minter can mint at a time.
     */
    constructor(
        string memory name_,
        string memory symbol_,
        uint256 maxBatchSize_
    ) {
        require(maxBatchSize_ > 0, "ERC721A: max batch size must be nonzero");
        _name = name_;
        _symbol = symbol_;
        maxBatchSize = maxBatchSize_;
    }

    /**
     * @dev See {IERC721Enumerable-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return currentIndex;
    }

    /**
     * @dev See {IERC721Enumerable-tokenByIndex}.
     */
    function tokenByIndex(uint256 index) public view override returns (uint256) {
        require(index < totalSupply(), "ERC721A: global index out of bounds");
        return index;
    }

    /**
     * @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
     * This read function is O(totalSupply). If calling from a separate contract, be sure to test gas first.
     * It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) public view override returns (uint256) {
        require(index < balanceOf(owner), "ERC721A: owner index out of bounds");
        uint256 numMintedSoFar = totalSupply();
        uint256 tokenIdsIdx = 0;
        address currOwnershipAddr = address(0);
        for (uint256 i = 0; i < numMintedSoFar; i++) {
            TokenOwnership memory ownership = _ownerships[i];
            if (ownership.addr != address(0)) {
                currOwnershipAddr = ownership.addr;
            }
            if (currOwnershipAddr == owner) {
                if (tokenIdsIdx == index) {
                    return i;
                }
                tokenIdsIdx++;
            }
        }
        revert("ERC721A: unable to get token of owner by index");
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            interfaceId == type(IERC721Enumerable).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view override returns (uint256) {
        require(owner != address(0), "ERC721A: balance query for the zero address");
        return uint256(_addressData[owner].balance);
    }

    function _numberMinted(address owner) internal view returns (uint256) {
        require(owner != address(0), "ERC721A: number minted query for the zero address");
        return uint256(_addressData[owner].numberMinted);
    }

    function ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
        require(_exists(tokenId), "ERC721A: owner query for nonexistent token");

        uint256 lowestTokenToCheck;
        if (tokenId >= maxBatchSize) {
            lowestTokenToCheck = tokenId - maxBatchSize + 1;
        }

        for (uint256 curr = tokenId; curr >= lowestTokenToCheck; curr--) {
            TokenOwnership memory ownership = _ownerships[curr];
            if (ownership.addr != address(0)) {
                return ownership;
            }
        }

        revert("ERC721A: unable to determine the owner of token");
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view override returns (address) {
        return ownershipOf(tokenId).addr;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overriden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public override {
        address owner = ERC721A.ownerOf(tokenId);
        require(to != owner, "ERC721A: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721A: approve caller is not owner nor approved for all"
        );

        _approve(to, tokenId, owner);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view override returns (address) {
        require(_exists(tokenId), "ERC721A: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public override {
        require(operator != _msgSender(), "ERC721A: approve to caller");

        _operatorApprovals[_msgSender()][operator] = approved;
        emit ApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public override {
        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public override {
        _transfer(from, to, tokenId);
        require(
            _checkOnERC721Received(from, to, tokenId, _data),
            "ERC721A: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     */
    function _exists(uint256 tokenId) internal view returns (bool) {
        return tokenId < currentIndex;
    }

    function _safeMint(address to, uint256 quantity) internal {
        _safeMint(to, quantity, "");
    }

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` cannot be larger than the max batch size.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(
        address to,
        uint256 quantity,
        bytes memory _data
    ) internal {
        uint256 startTokenId = currentIndex;
        require(to != address(0), "ERC721A: mint to the zero address");
        // We know if the first token in the batch doesn't exist, the other ones don't as well, because of serial ordering.
        require(!_exists(startTokenId), "ERC721A: token already minted");
        require(quantity <= maxBatchSize, "ERC721A: quantity to mint too high");

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        AddressData memory addressData = _addressData[to];
        _addressData[to] = AddressData(
            addressData.balance + uint128(quantity),
            addressData.numberMinted + uint128(quantity)
        );
        _ownerships[startTokenId] = TokenOwnership(to, uint64(block.timestamp));

        uint256 updatedIndex = startTokenId;

        for (uint256 i = 0; i < quantity; i++) {
            emit Transfer(address(0), to, updatedIndex);
            require(
                _checkOnERC721Received(address(0), to, updatedIndex, _data),
                "ERC721A: transfer to non ERC721Receiver implementer"
            );
            updatedIndex++;
        }

        currentIndex = updatedIndex;
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) private {
        TokenOwnership memory prevOwnership = ownershipOf(tokenId);

        bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
            getApproved(tokenId) == _msgSender() ||
            isApprovedForAll(prevOwnership.addr, _msgSender()));

        require(isApprovedOrOwner, "ERC721A: transfer caller is not owner nor approved");

        require(prevOwnership.addr == from, "ERC721A: transfer from incorrect owner");
        require(to != address(0), "ERC721A: transfer to the zero address");

        _beforeTokenTransfers(from, to, tokenId, 1);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId, prevOwnership.addr);

        _addressData[from].balance -= 1;
        _addressData[to].balance += 1;
        _ownerships[tokenId] = TokenOwnership(to, uint64(block.timestamp));

        // If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
        // Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
        uint256 nextTokenId = tokenId + 1;
        if (_ownerships[nextTokenId].addr == address(0)) {
            if (_exists(nextTokenId)) {
                _ownerships[nextTokenId] = TokenOwnership(prevOwnership.addr, prevOwnership.startTimestamp);
            }
        }

        emit Transfer(from, to, tokenId);
        _afterTokenTransfers(from, to, tokenId, 1);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits a {Approval} event.
     */
    function _approve(
        address to,
        uint256 tokenId,
        address owner
    ) private {
        _tokenApprovals[tokenId] = to;
        emit Approval(owner, to, tokenId);
    }

    uint256 public nextOwnerToExplicitlySet = 0;

    /**
     * @dev Explicitly set `owners` to eliminate loops in future calls of ownerOf().
     */
    function _setOwnersExplicit(uint256 quantity) internal {
        uint256 oldNextOwnerToSet = nextOwnerToExplicitlySet;
        require(quantity > 0, "quantity must be nonzero");
        uint256 endIndex = oldNextOwnerToSet + quantity - 1;
        if (endIndex > currentIndex - 1) {
            endIndex = currentIndex - 1;
        }
        // We know if the last one in the group exists, all in the group exist, due to serial ordering.
        require(_exists(endIndex), "not enough minted yet for this cleanup");
        for (uint256 i = oldNextOwnerToSet; i <= endIndex; i++) {
            if (_ownerships[i].addr == address(0)) {
                TokenOwnership memory ownership = ownershipOf(i);
                _ownerships[i] = TokenOwnership(ownership.addr, ownership.startTimestamp);
            }
        }
        nextOwnerToExplicitlySet = endIndex + 1;
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
                return retval == IERC721Receiver(to).onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721A: transfer to non ERC721Receiver implementer");
                } else {
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
     *
     * startTokenId - the first token id to be transferred
     * quantity - the amount to be transferred
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     */
    function _beforeTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
     * minting.
     *
     * startTokenId - the first token id to be transferred
     * quantity - the amount to be transferred
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero.
     * - `from` and `to` are never both zero.
     */
    function _afterTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Enumerable is IERC721 {
    /**
     * @dev Returns the total amount of tokens stored by the contract.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
     * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);

    /**
     * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
     * Use along with {totalSupply} to enumerate all tokens.
     */
    function tokenByIndex(uint256 index) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// Copyright (c) 2021 the ethier authors (github.com/divergencetech/ethier)
pragma solidity >=0.8.0 <0.9.0;

import "@openzeppelin/contracts/utils/math/Math.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

/// @notice A Seller with a linearly decreasing price.
abstract contract LinearDutchAuction is Ownable {
    /**
    @param unit The unit of "time" used for decreasing prices, block number or
    timestamp. NOTE: See the comment on AuctionIntervalUnit re use of Time as a
    unit.
    @param startPoint The block or timestamp at which the auction opens. A value
    of zero disables the auction. See setAuctionStartPoint().
    @param startPrice The price at `startPoint`.
    @param decreaseInterval The number of units to wait before decreasing the
    price. MUST be non-zero.
    @param decreaseSize The amount by which price decreases after every
    `decreaseInterval`.
    @param numDecreases The maximum number of price decreases before remaining
    constant. The reserve price is therefore implicit and equal to
    startPrice-numDecrease*decreaseSize.
     */
    struct DutchAuctionConfig {
        uint256 startPoint;
        uint256 startPrice;
        uint256 decreaseInterval;
        uint256 decreaseSize;
        // From https://docs.soliditylang.org/en/v0.8.10/types.html#enums "Enums
        // cannot have more than 256 members"; presumably they take 8 bits, so
        // use some of the numDecreases space instead.
        uint248 numDecreases;
        AuctionIntervalUnit unit;
    }

    /**
    @notice The unit of "time" along which the cost decreases.
    @dev If no value is provided then the zero UNSPECIFIED will trigger an
    error.
    NOTE: The Block unit is more reliable as it has an explicit progression
    (simply incrementing). Miners are allowed to have a time drift into the
    future although which predisposes to unexpected behaviour by which "future"
    costs are encountered. See the ConsenSys 15-second rule:
    https://consensys.net/blog/developers/solidity-best-practices-for-smart-contract-security/
     */
    enum AuctionIntervalUnit {
        UNSPECIFIED,
        Block,
        Time
    }

    /// @param expectedReserve See setAuctionConfig().
    constructor(
        DutchAuctionConfig memory config,
        uint256 expectedReserve
    )  {
        setAuctionConfig(config, expectedReserve);
    }

    /// @notice Configuration of price changes.
    DutchAuctionConfig public dutchAuctionConfig;

    /**
    @notice Sets the auction config.
    @param expectedReserve A safety check that the reserve, as calculated from
    the config, is as expected.
     */
    function setAuctionConfig(
        DutchAuctionConfig memory config,
        uint256 expectedReserve
    ) public onlyOwner {
        // Underflow might occur is size/num decreases is too large.
        unchecked {
            require(
                config.startPrice - config.decreaseSize * config.numDecreases ==
                    expectedReserve,
                "LinearDutchAuction: incorrect reserve"
            );
        }
        require(
            config.unit != AuctionIntervalUnit.UNSPECIFIED,
            "LinearDutchAuction: unspecified unit"
        );
        require(
            config.decreaseInterval > 0,
            "LinearDutchAuction: zero decrease interval"
        );
        dutchAuctionConfig = config;
    }

    /**
    @notice Sets the config startPoint. A startPoint of zero disables the
    auction.
    @dev The auction can be toggle on and off with this function, without the
    cost of having to update the entire config.
     */
    function setAuctionStartPoint(uint256 startPoint) public onlyOwner {
        dutchAuctionConfig.startPoint = startPoint;
    }

    /// @notice Dutch-auction logic cost function.
    function cost(uint256 n) public view returns (uint256) {
        DutchAuctionConfig storage cfg = dutchAuctionConfig;

        return n * (cfg.startPrice - Math.min((block.timestamp - cfg.startPoint) / cfg.decreaseInterval, cfg.numDecreases) * cfg.decreaseSize);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute.
        return (a / 2) + (b / 2) + (((a % 2) + (b % 2)) / 2);
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a / b + (a % b == 0 ? 0 : 1);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../utils/Address.sol";
import "../utils/Context.sol";
import "../utils/math/SafeMath.sol";

/**
 * @title PaymentSplitter
 * @dev This contract allows to split Ether payments among a group of accounts. The sender does not need to be aware
 * that the Ether will be split in this way, since it is handled transparently by the contract.
 *
 * The split can be in equal parts or in any other arbitrary proportion. The way this is specified is by assigning each
 * account to a number of shares. Of all the Ether that this contract receives, each account will then be able to claim
 * an amount proportional to the percentage of total shares they were assigned.
 *
 * `PaymentSplitter` follows a _pull payment_ model. This means that payments are not automatically forwarded to the
 * accounts but kept in this contract, and the actual transfer is triggered as a separate step by calling the {release}
 * function.
 */
contract PaymentSplitter is Context {
    event PayeeAdded(address account, uint256 shares);
    event PaymentReleased(address to, uint256 amount);
    event PaymentReceived(address from, uint256 amount);

    uint256 private _totalShares;
    uint256 private _totalReleased;

    mapping(address => uint256) private _shares;
    mapping(address => uint256) private _released;
    address[] private _payees;

    /**
     * @dev Creates an instance of `PaymentSplitter` where each account in `payees` is assigned the number of shares at
     * the matching position in the `shares` array.
     *
     * All addresses in `payees` must be non-zero. Both arrays must have the same non-zero length, and there must be no
     * duplicates in `payees`.
     */
    constructor(address[] memory payees, uint256[] memory shares_) payable {
        require(payees.length == shares_.length, "PaymentSplitter: payees and shares length mismatch");
        require(payees.length > 0, "PaymentSplitter: no payees");

        for (uint256 i = 0; i < payees.length; i++) {
            _addPayee(payees[i], shares_[i]);
        }
    }

    /**
     * @dev The Ether received will be logged with {PaymentReceived} events. Note that these events are not fully
     * reliable: it's possible for a contract to receive Ether without triggering this function. This only affects the
     * reliability of the events, and not the actual splitting of Ether.
     *
     * To learn more about this see the Solidity documentation for
     * https://solidity.readthedocs.io/en/latest/contracts.html#fallback-function[fallback
     * functions].
     */
    receive() external payable virtual {
        emit PaymentReceived(_msgSender(), msg.value);
    }

    /**
     * @dev Getter for the total shares held by payees.
     */
    function totalShares() public view returns (uint256) {
        return _totalShares;
    }

    /**
     * @dev Getter for the total amount of Ether already released.
     */
    function totalReleased() public view returns (uint256) {
        return _totalReleased;
    }

    /**
     * @dev Getter for the amount of shares held by an account.
     */
    function shares(address account) public view returns (uint256) {
        return _shares[account];
    }

    /**
     * @dev Getter for the amount of Ether already released to a payee.
     */
    function released(address account) public view returns (uint256) {
        return _released[account];
    }

    /**
     * @dev Getter for the address of the payee number `index`.
     */
    function payee(uint256 index) public view returns (address) {
        return _payees[index];
    }

    /**
     * @dev Triggers a transfer to `account` of the amount of Ether they are owed, according to their percentage of the
     * total shares and their previous withdrawals.
     */
    function release(address payable account) public virtual {
        require(_shares[account] > 0, "PaymentSplitter: account has no shares");

        uint256 totalReceived = address(this).balance + _totalReleased;
        uint256 payment = (totalReceived * _shares[account]) / _totalShares - _released[account];

        require(payment != 0, "PaymentSplitter: account is not due payment");

        _released[account] = _released[account] + payment;
        _totalReleased = _totalReleased + payment;

        Address.sendValue(account, payment);
        emit PaymentReleased(account, payment);
    }

    /**
     * @dev Add a new payee to the contract.
     * @param account The address of the payee to add.
     * @param shares_ The number of shares owned by the payee.
     */
    function _addPayee(address account, uint256 shares_) private {
        require(account != address(0), "PaymentSplitter: account is the zero address");
        require(shares_ > 0, "PaymentSplitter: shares are 0");
        require(_shares[account] == 0, "PaymentSplitter: account already has shares");

        _payees.push(account);
        _shares[account] = shares_;
        _totalShares = _totalShares + shares_;
        emit PayeeAdded(account, shares_);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >= 0.4.22 <0.9.0;

library console {
	address constant CONSOLE_ADDRESS = address(0x000000000000000000636F6e736F6c652e6c6f67);

	function _sendLogPayload(bytes memory payload) private view {
		uint256 payloadLength = payload.length;
		address consoleAddress = CONSOLE_ADDRESS;
		assembly {
			let payloadStart := add(payload, 32)
			let r := staticcall(gas(), consoleAddress, payloadStart, payloadLength, 0, 0)
		}
	}

	function log() internal view {
		_sendLogPayload(abi.encodeWithSignature("log()"));
	}

	function logInt(int p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(int)", p0));
	}

	function logUint(uint p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
	}

	function logString(string memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
	}

	function logBool(bool p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
	}

	function logAddress(address p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
	}

	function logBytes(bytes memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
	}

	function logBytes1(bytes1 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
	}

	function logBytes2(bytes2 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
	}

	function logBytes3(bytes3 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
	}

	function logBytes4(bytes4 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
	}

	function logBytes5(bytes5 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
	}

	function logBytes6(bytes6 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
	}

	function logBytes7(bytes7 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
	}

	function logBytes8(bytes8 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
	}

	function logBytes9(bytes9 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
	}

	function logBytes10(bytes10 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
	}

	function logBytes11(bytes11 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
	}

	function logBytes12(bytes12 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
	}

	function logBytes13(bytes13 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
	}

	function logBytes14(bytes14 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
	}

	function logBytes15(bytes15 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
	}

	function logBytes16(bytes16 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
	}

	function logBytes17(bytes17 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
	}

	function logBytes18(bytes18 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
	}

	function logBytes19(bytes19 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
	}

	function logBytes20(bytes20 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
	}

	function logBytes21(bytes21 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
	}

	function logBytes22(bytes22 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
	}

	function logBytes23(bytes23 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
	}

	function logBytes24(bytes24 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
	}

	function logBytes25(bytes25 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
	}

	function logBytes26(bytes26 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
	}

	function logBytes27(bytes27 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
	}

	function logBytes28(bytes28 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
	}

	function logBytes29(bytes29 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
	}

	function logBytes30(bytes30 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
	}

	function logBytes31(bytes31 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
	}

	function logBytes32(bytes32 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
	}

	function log(uint p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
	}

	function log(string memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
	}

	function log(bool p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
	}

	function log(address p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
	}

	function log(uint p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint)", p0, p1));
	}

	function log(uint p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string)", p0, p1));
	}

	function log(uint p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool)", p0, p1));
	}

	function log(uint p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address)", p0, p1));
	}

	function log(string memory p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint)", p0, p1));
	}

	function log(string memory p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
	}

	function log(string memory p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
	}

	function log(string memory p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
	}

	function log(bool p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint)", p0, p1));
	}

	function log(bool p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
	}

	function log(bool p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
	}

	function log(bool p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
	}

	function log(address p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint)", p0, p1));
	}

	function log(address p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
	}

	function log(address p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
	}

	function log(address p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
	}

	function log(uint p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint)", p0, p1, p2));
	}

	function log(uint p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string)", p0, p1, p2));
	}

	function log(uint p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool)", p0, p1, p2));
	}

	function log(uint p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address)", p0, p1, p2));
	}

	function log(uint p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint)", p0, p1, p2));
	}

	function log(uint p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string)", p0, p1, p2));
	}

	function log(uint p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool)", p0, p1, p2));
	}

	function log(uint p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address)", p0, p1, p2));
	}

	function log(uint p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint)", p0, p1, p2));
	}

	function log(uint p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string)", p0, p1, p2));
	}

	function log(uint p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool)", p0, p1, p2));
	}

	function log(uint p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
	}

	function log(string memory p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint)", p0, p1, p2));
	}

	function log(string memory p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
	}

	function log(string memory p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
	}

	function log(string memory p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
	}

	function log(bool p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint)", p0, p1, p2));
	}

	function log(bool p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string)", p0, p1, p2));
	}

	function log(bool p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool)", p0, p1, p2));
	}

	function log(bool p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
	}

	function log(bool p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint)", p0, p1, p2));
	}

	function log(bool p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
	}

	function log(bool p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
	}

	function log(bool p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
	}

	function log(bool p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint)", p0, p1, p2));
	}

	function log(bool p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
	}

	function log(bool p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
	}

	function log(bool p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
	}

	function log(address p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint)", p0, p1, p2));
	}

	function log(address p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string)", p0, p1, p2));
	}

	function log(address p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool)", p0, p1, p2));
	}

	function log(address p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address)", p0, p1, p2));
	}

	function log(address p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint)", p0, p1, p2));
	}

	function log(address p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
	}

	function log(address p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
	}

	function log(address p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
	}

	function log(address p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint)", p0, p1, p2));
	}

	function log(address p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
	}

	function log(address p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
	}

	function log(address p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
	}

	function log(address p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint)", p0, p1, p2));
	}

	function log(address p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
	}

	function log(address p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
	}

	function log(address p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
	}

	function log(uint p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
	}

}