Parallel Alpha [Base]

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: Unlicense
/*
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <goncalo.sa@consensys.net>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */
pragma solidity >=0.8.0 <0.9.0;


library BytesLib {
    function concat(
        bytes memory _preBytes,
        bytes memory _postBytes
    )
    internal
    pure
    returns (bytes memory)
    {
        bytes memory tempBytes;

        assembly {
        // Get a location of some free memory and store it in tempBytes as
        // Solidity does for memory variables.
            tempBytes := mload(0x40)

        // Store the length of the first bytes array at the beginning of
        // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)

        // Maintain a memory counter for the current write location in the
        // temp bytes array by adding the 32 bytes for the array length to
        // the starting location.
            let mc := add(tempBytes, 0x20)
        // Stop copying when the memory counter reaches the length of the
        // first bytes array.
            let end := add(mc, length)

            for {
            // Initialize a copy counter to the start of the _preBytes data,
            // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
            // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
            // Write the _preBytes data into the tempBytes memory 32 bytes
            // at a time.
                mstore(mc, mload(cc))
            }

        // Add the length of _postBytes to the current length of tempBytes
        // and store it as the new length in the first 32 bytes of the
        // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))

        // Move the memory counter back from a multiple of 0x20 to the
        // actual end of the _preBytes data.
            mc := end
        // Stop copying when the memory counter reaches the new combined
        // length of the arrays.
            end := add(mc, length)

            for {
                let cc := add(_postBytes, 0x20)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }

        // Update the free-memory pointer by padding our last write location
        // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
        // next 32 byte block, then round down to the nearest multiple of
        // 32. If the sum of the length of the two arrays is zero then add
        // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(0x40, and(
            add(add(end, iszero(add(length, mload(_preBytes)))), 31),
            not(31) // Round down to the nearest 32 bytes.
            ))
        }

        return tempBytes;
    }

    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
        // Read the first 32 bytes of _preBytes storage, which is the length
        // of the array. (We don't need to use the offset into the slot
        // because arrays use the entire slot.)
            let fslot := sload(_preBytes.slot)
        // Arrays of 31 bytes or less have an even value in their slot,
        // while longer arrays have an odd value. The actual length is
        // the slot divided by two for odd values, and the lowest order
        // byte divided by two for even values.
        // If the slot is even, bitwise and the slot with 255 and divide by
        // two to get the length. If the slot is odd, bitwise and the slot
        // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
        // slength can contain both the length and contents of the array
        // if length < 32 bytes so let's prepare for that
        // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
            // Since the new array still fits in the slot, we just need to
            // update the contents of the slot.
            // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                _preBytes.slot,
                // all the modifications to the slot are inside this
                // next block
                add(
                // we can just add to the slot contents because the
                // bytes we want to change are the LSBs
                fslot,
                add(
                mul(
                div(
                // load the bytes from memory
                mload(add(_postBytes, 0x20)),
                // zero all bytes to the right
                exp(0x100, sub(32, mlength))
                ),
                // and now shift left the number of bytes to
                // leave space for the length in the slot
                exp(0x100, sub(32, newlength))
                ),
                // increase length by the double of the memory
                // bytes length
                mul(mlength, 2)
                )
                )
                )
            }
            case 1 {
            // The stored value fits in the slot, but the combined value
            // will exceed it.
            // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

            // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

            // The contents of the _postBytes array start 32 bytes into
            // the structure. Our first read should obtain the `submod`
            // bytes that can fit into the unused space in the last word
            // of the stored array. To get this, we read 32 bytes starting
            // from `submod`, so the data we read overlaps with the array
            // contents by `submod` bytes. Masking the lowest-order
            // `submod` bytes allows us to add that value directly to the
            // stored value.

                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(
                sc,
                add(
                and(
                fslot,
                0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00
                ),
                and(mload(mc), mask)
                )
                )

                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
            // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
            // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

            // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

            // Copy over the first `submod` bytes of the new data as in
            // case 1 above.
                let slengthmod := mod(slength, 32)
                let mlengthmod := mod(mlength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(sc, add(sload(sc), and(mload(mc), mask)))

                for {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }

    function slice(
        bytes memory _bytes,
        uint256 _start,
        uint256 _length
    )
    internal
    pure
    returns (bytes memory)
    {
        require(_length + 31 >= _length, "slice_overflow");
        require(_bytes.length >= _start + _length, "slice_outOfBounds");

        bytes memory tempBytes;

        assembly {
            switch iszero(_length)
            case 0 {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
                tempBytes := mload(0x40)

            // The first word of the slice result is potentially a partial
            // word read from the original array. To read it, we calculate
            // the length of that partial word and start copying that many
            // bytes into the array. The first word we copy will start with
            // data we don't care about, but the last `lengthmod` bytes will
            // land at the beginning of the contents of the new array. When
            // we're done copying, we overwrite the full first word with
            // the actual length of the slice.
                let lengthmod := and(_length, 31)

            // The multiplication in the next line is necessary
            // because when slicing multiples of 32 bytes (lengthmod == 0)
            // the following copy loop was copying the origin's length
            // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)

                for {
                // The multiplication in the next line has the same exact purpose
                // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, _length)

            //update free-memory pointer
            //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
            //zero out the 32 bytes slice we are about to return
            //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return tempBytes;
    }

    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        require(_bytes.length >= _start + 1 , "toUint8_outOfBounds");
        uint8 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }

        return tempUint;
    }

    function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
        require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
        uint16 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }

        return tempUint;
    }

    function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
        require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
        uint32 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }

        return tempUint;
    }

    function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
        require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
        uint64 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x8), _start))
        }

        return tempUint;
    }

    function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
        require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
        uint96 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0xc), _start))
        }

        return tempUint;
    }

    function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
        require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
        uint128 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x10), _start))
        }

        return tempUint;
    }

    function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
        uint256 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }

        return tempUint;
    }

    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
        bytes32 tempBytes32;

        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }

        return tempBytes32;
    }

    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;

        assembly {
            let length := mload(_preBytes)

        // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
            // cb is a circuit breaker in the for loop since there's
            //  no said feature for inline assembly loops
            // cb = 1 - don't breaker
            // cb = 0 - break
                let cb := 1

                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)

                for {
                    let cc := add(_postBytes, 0x20)
                // the next line is the loop condition:
                // while(uint256(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                    // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
            // unsuccess:
                success := 0
            }
        }

        return success;
    }

    function equalStorage(
        bytes storage _preBytes,
        bytes memory _postBytes
    )
    internal
    view
    returns (bool)
    {
        bool success = true;

        assembly {
        // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
        // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)

        // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                    // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)

                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                        // unsuccess:
                            success := 0
                        }
                    }
                    default {
                    // cb is a circuit breaker in the for loop since there's
                    //  no said feature for inline assembly loops
                    // cb = 1 - don't breaker
                    // cb = 0 - break
                        let cb := 1

                    // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)

                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)

                    // the next line is the loop condition:
                    // while(uint256(mc < end) + cb == 2)
                        for {} eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                            // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
            // unsuccess:
                success := 0
            }
        }

        return success;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

address constant CANONICAL_OPERATOR_FILTER_REGISTRY_ADDRESS = 0x000000000000AAeB6D7670E522A718067333cd4E;
address constant CANONICAL_CORI_SUBSCRIPTION = 0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6;

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.0;

import "./ECDSA.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * _Available since v3.4._
 */
abstract contract EIP712 {
    /* solhint-disable var-name-mixedcase */
    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
    uint256 private immutable _CACHED_CHAIN_ID;
    address private immutable _CACHED_THIS;

    bytes32 private immutable _HASHED_NAME;
    bytes32 private immutable _HASHED_VERSION;
    bytes32 private immutable _TYPE_HASH;

    /* solhint-enable var-name-mixedcase */

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        bytes32 hashedName = keccak256(bytes(name));
        bytes32 hashedVersion = keccak256(bytes(version));
        bytes32 typeHash = keccak256(
            "EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
        );
        _HASHED_NAME = hashedName;
        _HASHED_VERSION = hashedVersion;
        _CACHED_CHAIN_ID = block.chainid;
        _CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
        _CACHED_THIS = address(this);
        _TYPE_HASH = typeHash;
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _CACHED_THIS && block.chainid == _CACHED_CHAIN_ID) {
            return _CACHED_DOMAIN_SEPARATOR;
        } else {
            return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
        }
    }

    function _buildDomainSeparator(
        bytes32 typeHash,
        bytes32 nameHash,
        bytes32 versionHash
    ) private view returns (bytes32) {
        return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC1155/ERC1155.sol)

pragma solidity ^0.8.0;

import "./IERC1155.sol";
import "./IERC1155Receiver.sol";
import "./extensions/IERC1155MetadataURI.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of the basic standard multi-token.
 * See https://eips.ethereum.org/EIPS/eip-1155
 * Originally based on code by Enjin: https://github.com/enjin/erc-1155
 *
 * _Available since v3.1._
 */
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
    using Address for address;

    // Mapping from token ID to account balances
    mapping(uint256 => mapping(address => uint256)) private _balances;

    // Mapping from account to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
    string private _uri;

    /**
     * @dev See {_setURI}.
     */
    constructor(string memory uri_) {
        _setURI(uri_);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC1155).interfaceId ||
            interfaceId == type(IERC1155MetadataURI).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\{id\}` substring with the
     * actual token type ID.
     */
    function uri(uint256) public view virtual override returns (string memory) {
        return _uri;
    }

    /**
     * @dev See {IERC1155-balanceOf}.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
        require(account != address(0), "ERC1155: address zero is not a valid owner");
        return _balances[id][account];
    }

    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
        public
        view
        virtual
        override
        returns (uint256[] memory)
    {
        require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");

        uint256[] memory batchBalances = new uint256[](accounts.length);

        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts[i], ids[i]);
        }

        return batchBalances;
    }

    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[account][operator];
    }

    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not token owner or approved"
        );
        _safeTransferFrom(from, to, id, amount, data);
    }

    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not token owner or approved"
        );
        _safeBatchTransferFrom(from, to, ids, amounts, data);
    }

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }
        _balances[id][to] += amount;

        emit TransferSingle(operator, from, to, id, amount);

        _afterTokenTransfer(operator, from, to, ids, amounts, data);

        _doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
            _balances[id][to] += amount;
        }

        emit TransferBatch(operator, from, to, ids, amounts);

        _afterTokenTransfer(operator, from, to, ids, amounts, data);

        _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
    }

    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\{id\}` substring in either the
     * URI or any of the amounts in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\{id\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        _uri = newuri;
    }

    /**
     * @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        _balances[id][to] += amount;
        emit TransferSingle(operator, address(0), to, id, amount);

        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);

        _doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _mintBatch(
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; i++) {
            _balances[ids[i]][to] += amounts[i];
        }

        emit TransferBatch(operator, address(0), to, ids, amounts);

        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);

        _doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
    }

    /**
     * @dev Destroys `amount` tokens of token type `id` from `from`
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `amount` tokens of token type `id`.
     */
    function _burn(
        address from,
        uint256 id,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }

        emit TransferSingle(operator, from, address(0), id, amount);

        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     */
    function _burnBatch(
        address from,
        uint256[] memory ids,
        uint256[] memory amounts
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        for (uint256 i = 0; i < ids.length; i++) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
        }

        emit TransferBatch(operator, from, address(0), ids, amounts);

        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC1155: setting approval status for self");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `ids` and `amounts` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    /**
     * @dev Hook that is called after any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
                if (response != IERC1155Receiver.onERC1155Received.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non-ERC1155Receiver implementer");
            }
        }
    }

    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non-ERC1155Receiver implementer");
            }
        }
    }

    function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
        uint256[] memory array = new uint256[](1);
        array[0] = element;

        return array;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// solhint-disable no-inline-assembly
pragma solidity >=0.6.9;

import "./IERC2771Recipient.sol";

/**
 * @title The ERC-2771 Recipient Base Abstract Class - Implementation
 *
 * @notice Note that this contract was called `BaseRelayRecipient` in the previous revision of the GSN.
 *
 * @notice A base contract to be inherited by any contract that want to receive relayed transactions.
 *
 * @notice A subclass must use `_msgSender()` instead of `msg.sender`.
 */
abstract contract ERC2771Recipient is IERC2771Recipient {
    /*
     * Forwarder singleton we accept calls from
     */
    address private _trustedForwarder;

    constructor(address trustedForwarder) {
        _trustedForwarder = trustedForwarder;
    }

    /**
     * :warning: **Warning** :warning: The Forwarder can have a full control over your Recipient. Only trust verified Forwarder.
     * @notice Method is not a required method to allow Recipients to trust multiple Forwarders. Not recommended yet.
     * @return forwarder The address of the Forwarder contract that is being used.
     */
    function getTrustedForwarder()
        public
        view
        virtual
        returns (address forwarder)
    {
        return _trustedForwarder;
    }

    function _setTrustedForwarder(address _forwarder) internal {
        _trustedForwarder = _forwarder;
    }

    /// @inheritdoc IERC2771Recipient
    function isTrustedForwarder(
        address forwarder
    ) public view virtual override returns (bool) {
        return forwarder == _trustedForwarder;
    }

    /// @inheritdoc IERC2771Recipient
    function _msgSender() internal view virtual override returns (address ret) {
        if (msg.data.length >= 20 && isTrustedForwarder(msg.sender)) {
            // At this point we know that the sender is a trusted forwarder,
            // so we trust that the last bytes of msg.data are the verified sender address.
            // extract sender address from the end of msg.data
            assembly {
                ret := shr(96, calldataload(sub(calldatasize(), 20)))
            }
        } else {
            ret = msg.sender;
        }
    }

    /// @inheritdoc IERC2771Recipient
    function _msgData()
        internal
        view
        virtual
        override
        returns (bytes calldata ret)
    {
        if (msg.data.length >= 20 && isTrustedForwarder(msg.sender)) {
            return msg.data[0:msg.data.length - 20];
        } else {
            return msg.data;
        }
    }
}

// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.7.6;

library ExcessivelySafeCall {
    uint256 constant LOW_28_MASK =
    0x00000000ffffffffffffffffffffffffffffffffffffffffffffffffffffffff;

    /// @notice Use when you _really_ really _really_ don't trust the called
    /// contract. This prevents the called contract from causing reversion of
    /// the caller in as many ways as we can.
    /// @dev The main difference between this and a solidity low-level call is
    /// that we limit the number of bytes that the callee can cause to be
    /// copied to caller memory. This prevents stupid things like malicious
    /// contracts returning 10,000,000 bytes causing a local OOG when copying
    /// to memory.
    /// @param _target The address to call
    /// @param _gas The amount of gas to forward to the remote contract
    /// @param _maxCopy The maximum number of bytes of returndata to copy
    /// to memory.
    /// @param _calldata The data to send to the remote contract
    /// @return success and returndata, as `.call()`. Returndata is capped to
    /// `_maxCopy` bytes.
    function excessivelySafeCall(
        address _target,
        uint256 _gas,
        uint16 _maxCopy,
        bytes memory _calldata
    ) internal returns (bool, bytes memory) {
        // set up for assembly call
        uint256 _toCopy;
        bool _success;
        bytes memory _returnData = new bytes(_maxCopy);
        // dispatch message to recipient
        // by assembly calling "handle" function
        // we call via assembly to avoid memcopying a very large returndata
        // returned by a malicious contract
        assembly {
            _success := call(
            _gas, // gas
            _target, // recipient
            0, // ether value
            add(_calldata, 0x20), // inloc
            mload(_calldata), // inlen
            0, // outloc
            0 // outlen
            )
        // limit our copy to 256 bytes
            _toCopy := returndatasize()
            if gt(_toCopy, _maxCopy) {
                _toCopy := _maxCopy
            }
        // Store the length of the copied bytes
            mstore(_returnData, _toCopy)
        // copy the bytes from returndata[0:_toCopy]
            returndatacopy(add(_returnData, 0x20), 0, _toCopy)
        }
        return (_success, _returnData);
    }

    /// @notice Use when you _really_ really _really_ don't trust the called
    /// contract. This prevents the called contract from causing reversion of
    /// the caller in as many ways as we can.
    /// @dev The main difference between this and a solidity low-level call is
    /// that we limit the number of bytes that the callee can cause to be
    /// copied to caller memory. This prevents stupid things like malicious
    /// contracts returning 10,000,000 bytes causing a local OOG when copying
    /// to memory.
    /// @param _target The address to call
    /// @param _gas The amount of gas to forward to the remote contract
    /// @param _maxCopy The maximum number of bytes of returndata to copy
    /// to memory.
    /// @param _calldata The data to send to the remote contract
    /// @return success and returndata, as `.call()`. Returndata is capped to
    /// `_maxCopy` bytes.
    function excessivelySafeStaticCall(
        address _target,
        uint256 _gas,
        uint16 _maxCopy,
        bytes memory _calldata
    ) internal view returns (bool, bytes memory) {
        // set up for assembly call
        uint256 _toCopy;
        bool _success;
        bytes memory _returnData = new bytes(_maxCopy);
        // dispatch message to recipient
        // by assembly calling "handle" function
        // we call via assembly to avoid memcopying a very large returndata
        // returned by a malicious contract
        assembly {
            _success := staticcall(
            _gas, // gas
            _target, // recipient
            add(_calldata, 0x20), // inloc
            mload(_calldata), // inlen
            0, // outloc
            0 // outlen
            )
        // limit our copy to 256 bytes
            _toCopy := returndatasize()
            if gt(_toCopy, _maxCopy) {
                _toCopy := _maxCopy
            }
        // Store the length of the copied bytes
            mstore(_returnData, _toCopy)
        // copy the bytes from returndata[0:_toCopy]
            returndatacopy(add(_returnData, 0x20), 0, _toCopy)
        }
        return (_success, _returnData);
    }

    /**
     * @notice Swaps function selectors in encoded contract calls
     * @dev Allows reuse of encoded calldata for functions with identical
     * argument types but different names. It simply swaps out the first 4 bytes
     * for the new selector. This function modifies memory in place, and should
     * only be used with caution.
     * @param _newSelector The new 4-byte selector
     * @param _buf The encoded contract args
     */
    function swapSelector(bytes4 _newSelector, bytes memory _buf)
    internal
    pure
    {
        require(_buf.length >= 4);
        uint256 _mask = LOW_28_MASK;
        assembly {
        // load the first word of
            let _word := mload(add(_buf, 0x20))
        // mask out the top 4 bytes
        // /x
            _word := and(_word, _mask)
            _word := or(_newSelector, _word)
            mstore(add(_buf, 0x20), _word)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC1155/IERC1155.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)

pragma solidity ^0.8.0;

import "../IERC1155.sol";

/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155MetadataURI is IERC1155 {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\{id\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC165.sol)

pragma solidity ^0.8.0;

import "../utils/introspection/IERC165.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title The ERC-2771 Recipient Base Abstract Class - Declarations
 *
 * @notice A contract must implement this interface in order to support relayed transaction.
 *
 * @notice It is recommended that your contract inherits from the ERC2771Recipient contract.
 */
abstract contract IERC2771Recipient {
    /**
     * :warning: **Warning** :warning: The Forwarder can have a full control over your Recipient. Only trust verified Forwarder.
     * @param forwarder The address of the Forwarder contract that is being used.
     * @return isTrustedForwarder `true` if the Forwarder is trusted to forward relayed transactions by this Recipient.
     */
    function isTrustedForwarder(
        address forwarder
    ) public view virtual returns (bool);

    /**
     * @notice Use this method the contract anywhere instead of msg.sender to support relayed transactions.
     * @return sender The real sender of this call.
     * For a call that came through the Forwarder the real sender is extracted from the last 20 bytes of the `msg.data`.
     * Otherwise simply returns `msg.sender`.
     */
    function _msgSender() internal view virtual returns (address);

    /**
     * @notice Use this method in the contract instead of `msg.data` when difference matters (hashing, signature, etc.)
     * @return data The real `msg.data` of this call.
     * For a call that came through the Forwarder, the real sender address was appended as the last 20 bytes
     * of the `msg.data` - so this method will strip those 20 bytes off.
     * Otherwise (if the call was made directly and not through the forwarder) simply returns `msg.data`.
     */
    function _msgData() internal view virtual returns (bytes calldata);
}

// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.8.0;
pragma abicoder v2;

import "@openzeppelin/contracts/interfaces/IERC165.sol";

/**
 * @title The Forwarder Interface
 * @notice The contracts implementing this interface take a role of authorization, authentication and replay protection
 * for contracts that choose to trust a `Forwarder`, instead of relying on a mechanism built into the Ethereum protocol.
 *
 * @notice if the `Forwarder` contract decides that an incoming `ForwardRequest` is valid, it must append 20 bytes that
 * represent the caller to the `data` field of the request and send this new data to the target address (the `to` field)
 *
 * :warning: **Warning** :warning: The Forwarder can have a full control over a `Recipient` contract.
 * Any vulnerability in a `Forwarder` implementation can make all of its `Recipient` contracts susceptible!
 * Recipient contracts should only trust forwarders that passed through security audit,
 * otherwise they are susceptible to identity theft.
 */
interface IForwarder is IERC165 {
    /**
     * @notice A representation of a request for a `Forwarder` to send `data` on behalf of a `from` to a target (`to`).
     */
    struct ForwardRequest {
        address from;
        address to;
        uint256 value;
        uint256 gas;
        uint256 nonce;
        bytes data;
        uint256 validUntilTime;
    }

    event DomainRegistered(bytes32 indexed domainSeparator, bytes domainValue);

    event RequestTypeRegistered(bytes32 indexed typeHash, string typeStr);

    /**
     * @param from The address of a sender.
     * @return The nonce for this address.
     */
    function getNonce(address from) external view returns (uint256);

    /**
     * @notice Verify the transaction is valid and can be executed.
     * Implementations must validate the signature and the nonce of the request are correct.
     * Does not revert and returns successfully if the input is valid.
     * Reverts if any validation has failed. For instance, if either signature or nonce are incorrect.
     * Reverts if `domainSeparator` or `requestTypeHash` are not registered as well.
     */
    function verify(
        ForwardRequest calldata forwardRequest,
        bytes32 domainSeparator,
        bytes32 requestTypeHash,
        bytes calldata suffixData,
        bytes calldata signature
    ) external view;

    /**
     * @notice Executes a transaction specified by the `ForwardRequest`.
     * The transaction is first verified and then executed.
     * The success flag and returned bytes array of the `CALL` are returned as-is.
     *
     * This method would revert only in case of a verification error.
     *
     * All the target errors are reported using the returned success flag and returned bytes array.
     *
     * @param forwardRequest All requested transaction parameters.
     * @param domainSeparator The domain used when signing this request.
     * @param requestTypeHash The request type used when signing this request.
     * @param suffixData The ABI-encoded extension data for the current `RequestType` used when signing this request.
     * @param signature The client signature to be validated.
     *
     * @return success The success flag of the underlying `CALL` to the target address.
     * @return ret The byte array returned by the underlying `CALL` to the target address.
     */
    function execute(
        ForwardRequest calldata forwardRequest,
        bytes32 domainSeparator,
        bytes32 requestTypeHash,
        bytes calldata suffixData,
        bytes calldata signature
    ) external payable returns (bool success, bytes memory ret);

    /**
     * @notice Register a new Request typehash.
     *
     * @notice This is necessary for the Forwarder to be able to verify the signatures conforming to the ERC-712.
     *
     * @param typeName The name of the request type.
     * @param typeSuffix Any extra data after the generic params. Must contain add at least one param.
     * The generic ForwardRequest type is always registered by the constructor.
     */
    function registerRequestType(
        string calldata typeName,
        string calldata typeSuffix
    ) external;

    /**
     * @notice Register a new domain separator.
     *
     * @notice This is necessary for the Forwarder to be able to verify the signatures conforming to the ERC-712.
     *
     * @notice The domain separator must have the following fields: `name`, `version`, `chainId`, `verifyingContract`.
     * The `chainId` is the current network's `chainId`, and the `verifyingContract` is this Forwarder's address.
     * This method accepts the domain name and version to create and register the domain separator value.
     * @param name The domain's display name.
     * @param version The domain/protocol version.
     */
    function registerDomainSeparator(
        string calldata name,
        string calldata version,
        uint256 chainId
    ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.5.0;

import "./ILayerZeroUserApplicationConfig.sol";

interface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {
    // @notice send a LayerZero message to the specified address at a LayerZero endpoint.
    // @param _dstChainId - the destination chain identifier
    // @param _destination - the address on destination chain (in bytes). address length/format may vary by chains
    // @param _payload - a custom bytes payload to send to the destination contract
    // @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address
    // @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction
    // @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination
    function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;

    // @notice used by the messaging library to publish verified payload
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source contract (as bytes) at the source chain
    // @param _dstAddress - the address on destination chain
    // @param _nonce - the unbound message ordering nonce
    // @param _gasLimit - the gas limit for external contract execution
    // @param _payload - verified payload to send to the destination contract
    function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external;

    // @notice get the inboundNonce of a lzApp from a source chain which could be EVM or non-EVM chain
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);

    // @notice get the outboundNonce from this source chain which, consequently, is always an EVM
    // @param _srcAddress - the source chain contract address
    function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);

    // @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery
    // @param _dstChainId - the destination chain identifier
    // @param _userApplication - the user app address on this EVM chain
    // @param _payload - the custom message to send over LayerZero
    // @param _payInZRO - if false, user app pays the protocol fee in native token
    // @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain
    function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);

    // @notice get this Endpoint's immutable source identifier
    function getChainId() external view returns (uint16);

    // @notice the interface to retry failed message on this Endpoint destination
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    // @param _payload - the payload to be retried
    function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external;

    // @notice query if any STORED payload (message blocking) at the endpoint.
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);

    // @notice query if the _libraryAddress is valid for sending msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getSendLibraryAddress(address _userApplication) external view returns (address);

    // @notice query if the _libraryAddress is valid for receiving msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getReceiveLibraryAddress(address _userApplication) external view returns (address);

    // @notice query if the non-reentrancy guard for send() is on
    // @return true if the guard is on. false otherwise
    function isSendingPayload() external view returns (bool);

    // @notice query if the non-reentrancy guard for receive() is on
    // @return true if the guard is on. false otherwise
    function isReceivingPayload() external view returns (bool);

    // @notice get the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _userApplication - the contract address of the user application
    // @param _configType - type of configuration. every messaging library has its own convention.
    function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);

    // @notice get the send() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getSendVersion(address _userApplication) external view returns (uint16);

    // @notice get the lzReceive() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getReceiveVersion(address _userApplication) external view returns (uint16);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.5.0;

interface ILayerZeroReceiver {
    // @notice LayerZero endpoint will invoke this function to deliver the message on the destination
    // @param _srcChainId - the source endpoint identifier
    // @param _srcAddress - the source sending contract address from the source chain
    // @param _nonce - the ordered message nonce
    // @param _payload - the signed payload is the UA bytes has encoded to be sent
    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) external;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.5.0;

interface ILayerZeroUserApplicationConfig {
    // @notice set the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _configType - type of configuration. every messaging library has its own convention.
    // @param _config - configuration in the bytes. can encode arbitrary content.
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external;

    // @notice set the send() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setSendVersion(uint16 _version) external;

    // @notice set the lzReceive() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setReceiveVersion(uint16 _version) external;

    // @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload
    // @param _srcChainId - the chainId of the source chain
    // @param _srcAddress - the contract address of the source contract at the source chain
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.5.0;

import "./IONFT1155Core.sol";
import "@openzeppelin/contracts/token/ERC1155/IERC1155.sol";

/**
 * @dev Interface of the ONFT standard
 */
interface IONFT1155 is IONFT1155Core, IERC1155 {

}

// SPDX-License-Identifier: MIT

pragma solidity >=0.5.0;

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";

/**
 * @dev Interface of the ONFT Core standard
 */
interface IONFT1155Core is IERC165 {
    event SendToChain(uint16 indexed _dstChainId, address indexed _from, bytes indexed _toAddress, uint _tokenId, uint _amount);
    event SendBatchToChain(uint16 indexed _dstChainId, address indexed _from, bytes indexed _toAddress, uint[] _tokenIds, uint[] _amounts);
    event ReceiveFromChain(uint16 indexed _srcChainId, bytes indexed _srcAddress, address indexed _toAddress, uint _tokenId, uint _amount);
    event ReceiveBatchFromChain(uint16 indexed _srcChainId, bytes indexed _srcAddress, address indexed _toAddress, uint[] _tokenIds, uint[] _amounts);

    // _from - address where tokens should be deducted from on behalf of
    // _dstChainId - L0 defined chain id to send tokens too
    // _toAddress - dynamic bytes array which contains the address to whom you are sending tokens to on the dstChain
    // _tokenId - token Id to transfer
    // _amount - amount of the tokens to transfer
    // _refundAddress - address on src that will receive refund for any overpayment of L0 fees
    // _zroPaymentAddress - if paying in zro, pass the address to use. using 0x0 indicates not paying fees in zro
    // _adapterParams - flexible bytes array to indicate messaging adapter services in L0
    function sendFrom(address _from, uint16 _dstChainId, bytes calldata _toAddress, uint _tokenId, uint _amount, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;

    // _from - address where tokens should be deducted from on behalf of
    // _dstChainId - L0 defined chain id to send tokens too
    // _toAddress - dynamic bytes array which contains the address to whom you are sending tokens to on the dstChain
    // _tokenIds - token Ids to transfer
    // _amounts - amounts of the tokens to transfer
    // _refundAddress - address on src that will receive refund for any overpayment of L0 fees
    // _zroPaymentAddress - if paying in zro, pass the address to use. using 0x0 indicates not paying fees in zro
    // _adapterParams - flexible bytes array to indicate messaging adapter services in L0
    function sendBatchFrom(address _from, uint16 _dstChainId, bytes calldata _toAddress, uint[] calldata _tokenIds, uint[] calldata _amounts, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;

    // _dstChainId - L0 defined chain id to send tokens too
    // _toAddress - dynamic bytes array which contains the address to whom you are sending tokens to on the dstChain
    // _tokenId - token Id to transfer
    // _amount - amount of the tokens to transfer
    // _useZro - indicates to use zro to pay L0 fees
    // _adapterParams - flexible bytes array to indicate messaging adapter services in L0
    function estimateSendFee(uint16 _dstChainId, bytes calldata _toAddress, uint _tokenId, uint _amount, bool _useZro, bytes calldata _adapterParams) external view returns (uint nativeFee, uint zroFee);

    // _dstChainId - L0 defined chain id to send tokens too
    // _toAddress - dynamic bytes array which contains the address to whom you are sending tokens to on the dstChain
    // _tokenIds - tokens Id to transfer
    // _amounts - amounts of the tokens to transfer
    // _useZro - indicates to use zro to pay L0 fees
    // _adapterParams - flexible bytes array to indicate messaging adapter services in L0
    function estimateSendBatchFee(uint16 _dstChainId, bytes calldata _toAddress, uint[] calldata _tokenIds, uint[] calldata _amounts, bool _useZro, bytes calldata _adapterParams) external view returns (uint nativeFee, uint zroFee);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

interface IOperatorFilterRegistry {
    /**
     * @notice Returns true if operator is not filtered for a given token, either by address or codeHash. Also returns
     *         true if supplied registrant address is not registered.
     */
    function isOperatorAllowed(address registrant, address operator) external view returns (bool);

    /**
     * @notice Registers an address with the registry. May be called by address itself or by EIP-173 owner.
     */
    function register(address registrant) external;

    /**
     * @notice Registers an address with the registry and "subscribes" to another address's filtered operators and codeHashes.
     */
    function registerAndSubscribe(address registrant, address subscription) external;

    /**
     * @notice Registers an address with the registry and copies the filtered operators and codeHashes from another
     *         address without subscribing.
     */
    function registerAndCopyEntries(address registrant, address registrantToCopy) external;

    /**
     * @notice Unregisters an address with the registry and removes its subscription. May be called by address itself or by EIP-173 owner.
     *         Note that this does not remove any filtered addresses or codeHashes.
     *         Also note that any subscriptions to this registrant will still be active and follow the existing filtered addresses and codehashes.
     */
    function unregister(address addr) external;

    /**
     * @notice Update an operator address for a registered address - when filtered is true, the operator is filtered.
     */
    function updateOperator(address registrant, address operator, bool filtered) external;

    /**
     * @notice Update multiple operators for a registered address - when filtered is true, the operators will be filtered. Reverts on duplicates.
     */
    function updateOperators(address registrant, address[] calldata operators, bool filtered) external;

    /**
     * @notice Update a codeHash for a registered address - when filtered is true, the codeHash is filtered.
     */
    function updateCodeHash(address registrant, bytes32 codehash, bool filtered) external;

    /**
     * @notice Update multiple codeHashes for a registered address - when filtered is true, the codeHashes will be filtered. Reverts on duplicates.
     */
    function updateCodeHashes(address registrant, bytes32[] calldata codeHashes, bool filtered) external;

    /**
     * @notice Subscribe an address to another registrant's filtered operators and codeHashes. Will remove previous
     *         subscription if present.
     *         Note that accounts with subscriptions may go on to subscribe to other accounts - in this case,
     *         subscriptions will not be forwarded. Instead the former subscription's existing entries will still be
     *         used.
     */
    function subscribe(address registrant, address registrantToSubscribe) external;

    /**
     * @notice Unsubscribe an address from its current subscribed registrant, and optionally copy its filtered operators and codeHashes.
     */
    function unsubscribe(address registrant, bool copyExistingEntries) external;

    /**
     * @notice Get the subscription address of a given registrant, if any.
     */
    function subscriptionOf(address addr) external returns (address registrant);

    /**
     * @notice Get the set of addresses subscribed to a given registrant.
     *         Note that order is not guaranteed as updates are made.
     */
    function subscribers(address registrant) external returns (address[] memory);

    /**
     * @notice Get the subscriber at a given index in the set of addresses subscribed to a given registrant.
     *         Note that order is not guaranteed as updates are made.
     */
    function subscriberAt(address registrant, uint256 index) external returns (address);

    /**
     * @notice Copy filtered operators and codeHashes from a different registrantToCopy to addr.
     */
    function copyEntriesOf(address registrant, address registrantToCopy) external;

    /**
     * @notice Returns true if operator is filtered by a given address or its subscription.
     */
    function isOperatorFiltered(address registrant, address operator) external returns (bool);

    /**
     * @notice Returns true if the hash of an address's code is filtered by a given address or its subscription.
     */
    function isCodeHashOfFiltered(address registrant, address operatorWithCode) external returns (bool);

    /**
     * @notice Returns true if a codeHash is filtered by a given address or its subscription.
     */
    function isCodeHashFiltered(address registrant, bytes32 codeHash) external returns (bool);

    /**
     * @notice Returns a list of filtered operators for a given address or its subscription.
     */
    function filteredOperators(address addr) external returns (address[] memory);

    /**
     * @notice Returns the set of filtered codeHashes for a given address or its subscription.
     *         Note that order is not guaranteed as updates are made.
     */
    function filteredCodeHashes(address addr) external returns (bytes32[] memory);

    /**
     * @notice Returns the filtered operator at the given index of the set of filtered operators for a given address or
     *         its subscription.
     *         Note that order is not guaranteed as updates are made.
     */
    function filteredOperatorAt(address registrant, uint256 index) external returns (address);

    /**
     * @notice Returns the filtered codeHash at the given index of the list of filtered codeHashes for a given address or
     *         its subscription.
     *         Note that order is not guaranteed as updates are made.
     */
    function filteredCodeHashAt(address registrant, uint256 index) external returns (bytes32);

    /**
     * @notice Returns true if an address has registered
     */
    function isRegistered(address addr) external returns (bool);

    /**
     * @dev Convenience method to compute the code hash of an arbitrary contract
     */
    function codeHashOf(address addr) external returns (bytes32);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;

interface IParallelAlphaInvoke {
    /**
     * @dev Invalid address of zero
     *
     * @param addressType Which address is incorrectly set
     */
    error ZeroAddress(string addressType);
    /**
     * @dev Native transfer error
     */
    error TransferError();
    /**
     * @dev Invalid adapter params
     */
    error InvalidAdapterParams();
    /**
     * @dev Invalid batch size
     */
    error ExceedsBatchSizeLimit();

    /**
     * @dev Emitted when the new forwarder is set
     * @param forwarder The address of the new forwarder
     */
    event TrustedForwarderSet(address forwarder);
    /**
     * @dev Emitted when the new prime is set
     * @param prime The address of the new prime
     */
    event PrimeSet(address prime);
    /**
     * @dev Emitted when the batch size limit is set
     * @param batchSizeLimit The new batch size limit
     */
    event BatchSizeLimitSet(uint256 batchSizeLimit);

    /**
     * @dev Fired when a new gateway (i.e. spend handler contract) is registered
     * @param handler - The address of the newly registered invokeSpend handler contract
     * @param nftDestinationAddress - The address to which Parallel Alpha was collected
     * @param nativeTokenDestinationAddress - The address to which native token was collected
     * @param primeDestinationAddress - The address to which PRIME was collected
     */
    event SpendGatewayRegistered(
        address indexed handler,
        address nftDestinationAddress,
        address nativeTokenDestinationAddress,
        address primeDestinationAddress
    );
    /**
     * @dev Fired when the handler is invoked
     * @param from - The address of the invoker
     * @param nftDestination - The address to which nfts was collected
     * @param nativeDestination - The address to which ETH or whatever native token was collected
     * @param primeDestination - The address to which PRIME was collected
     * @param id - The arbitrary identifier used for tracking
     * @param nativeValue - The amount of ETH or whatever native token that was sent
     * @param primeValue - The amount of PRIME that was sent
     * @param data - Additional data that was sent
     */
    event SpendInvoked(
        address indexed from,
        address nftDestination,
        address nativeDestination,
        address primeDestination,
        uint256 id,
        uint256[] _tokenIds,
        uint256[] _amounts,
        uint256 nativeValue,
        uint256 primeValue,
        bytes data
    );
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/access/Ownable.sol";
import "../interfaces/ILayerZeroReceiver.sol";
import "../interfaces/ILayerZeroUserApplicationConfig.sol";
import "../interfaces/ILayerZeroEndpoint.sol";
import "../util/BytesLib.sol";

/*
 * a generic LzReceiver implementation
 */
abstract contract LzApp is Ownable, ILayerZeroReceiver, ILayerZeroUserApplicationConfig {
    using BytesLib for bytes;

    // ua can not send payload larger than this by default, but it can be changed by the ua owner
    uint constant public DEFAULT_PAYLOAD_SIZE_LIMIT = 10000;

    ILayerZeroEndpoint public immutable lzEndpoint;
    mapping(uint16 => bytes) public trustedRemoteLookup;
    mapping(uint16 => mapping(uint16 => uint)) public minDstGasLookup;
    mapping(uint16 => uint) public payloadSizeLimitLookup;
    address public precrime;

    event SetPrecrime(address precrime);
    event SetTrustedRemote(uint16 _remoteChainId, bytes _path);
    event SetTrustedRemoteAddress(uint16 _remoteChainId, bytes _remoteAddress);
    event SetMinDstGas(uint16 _dstChainId, uint16 _type, uint _minDstGas);

    constructor(address _endpoint) {
        lzEndpoint = ILayerZeroEndpoint(_endpoint);
    }

    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public virtual override {
        // lzReceive must be called by the endpoint for security
        require(_msgSender() == address(lzEndpoint), "LzApp: invalid endpoint caller");

        bytes memory trustedRemote = trustedRemoteLookup[_srcChainId];
        // if will still block the message pathway from (srcChainId, srcAddress). should not receive message from untrusted remote.
        require(_srcAddress.length == trustedRemote.length && trustedRemote.length > 0 && keccak256(_srcAddress) == keccak256(trustedRemote), "LzApp: invalid source sending contract");

        _blockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
    }

    // abstract function - the default behaviour of LayerZero is blocking. See: NonblockingLzApp if you dont need to enforce ordered messaging
    function _blockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual;

    function _lzSend(uint16 _dstChainId, bytes memory _payload, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams, uint _nativeFee) internal virtual {
        bytes memory trustedRemote = trustedRemoteLookup[_dstChainId];
        require(trustedRemote.length != 0, "LzApp: destination chain is not a trusted source");
        _checkPayloadSize(_dstChainId, _payload.length);
        lzEndpoint.send{value: _nativeFee}(_dstChainId, trustedRemote, _payload, _refundAddress, _zroPaymentAddress, _adapterParams);
    }

    function _checkGasLimit(uint16 _dstChainId, uint16 _type, bytes memory _adapterParams, uint _extraGas) internal view virtual {
        uint providedGasLimit = _getGasLimit(_adapterParams);
        uint minGasLimit = minDstGasLookup[_dstChainId][_type] + _extraGas;
        require(minGasLimit > 0, "LzApp: minGasLimit not set");
        require(providedGasLimit >= minGasLimit, "LzApp: gas limit is too low");
    }

    function _getGasLimit(bytes memory _adapterParams) internal pure virtual returns (uint gasLimit) {
        require(_adapterParams.length >= 34, "LzApp: invalid adapterParams");
        assembly {
            gasLimit := mload(add(_adapterParams, 34))
        }
    }

    function _checkPayloadSize(uint16 _dstChainId, uint _payloadSize) internal view virtual {
        uint payloadSizeLimit = payloadSizeLimitLookup[_dstChainId];
        if (payloadSizeLimit == 0) { // use default if not set
            payloadSizeLimit = DEFAULT_PAYLOAD_SIZE_LIMIT;
        }
        require(_payloadSize <= payloadSizeLimit, "LzApp: payload size is too large");
    }

    //---------------------------UserApplication config----------------------------------------
    function getConfig(uint16 _version, uint16 _chainId, address, uint _configType) external view returns (bytes memory) {
        return lzEndpoint.getConfig(_version, _chainId, address(this), _configType);
    }

    // generic config for LayerZero user Application
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external override onlyOwner {
        lzEndpoint.setConfig(_version, _chainId, _configType, _config);
    }

    function setSendVersion(uint16 _version) external override onlyOwner {
        lzEndpoint.setSendVersion(_version);
    }

    function setReceiveVersion(uint16 _version) external override onlyOwner {
        lzEndpoint.setReceiveVersion(_version);
    }

    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external override onlyOwner {
        lzEndpoint.forceResumeReceive(_srcChainId, _srcAddress);
    }

    // _path = abi.encodePacked(remoteAddress, localAddress)
    // this function set the trusted path for the cross-chain communication
    function setTrustedRemote(uint16 _srcChainId, bytes calldata _path) external onlyOwner {
        trustedRemoteLookup[_srcChainId] = _path;
        emit SetTrustedRemote(_srcChainId, _path);
    }

    function setTrustedRemoteAddress(uint16 _remoteChainId, bytes calldata _remoteAddress) external onlyOwner {
        trustedRemoteLookup[_remoteChainId] = abi.encodePacked(_remoteAddress, address(this));
        emit SetTrustedRemoteAddress(_remoteChainId, _remoteAddress);
    }

    function getTrustedRemoteAddress(uint16 _remoteChainId) external view returns (bytes memory) {
        bytes memory path = trustedRemoteLookup[_remoteChainId];
        require(path.length != 0, "LzApp: no trusted path record");
        return path.slice(0, path.length - 20); // the last 20 bytes should be address(this)
    }

    function setPrecrime(address _precrime) external onlyOwner {
        precrime = _precrime;
        emit SetPrecrime(_precrime);
    }

    function setMinDstGas(uint16 _dstChainId, uint16 _packetType, uint _minGas) external onlyOwner {
        require(_minGas > 0, "LzApp: invalid minGas");
        minDstGasLookup[_dstChainId][_packetType] = _minGas;
        emit SetMinDstGas(_dstChainId, _packetType, _minGas);
    }

    // if the size is 0, it means default size limit
    function setPayloadSizeLimit(uint16 _dstChainId, uint _size) external onlyOwner {
        payloadSizeLimitLookup[_dstChainId] = _size;
    }

    //--------------------------- VIEW FUNCTION ----------------------------------------
    function isTrustedRemote(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool) {
        bytes memory trustedSource = trustedRemoteLookup[_srcChainId];
        return keccak256(trustedSource) == keccak256(_srcAddress);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./LzApp.sol";
import "../util/ExcessivelySafeCall.sol";

/*
 * the default LayerZero messaging behaviour is blocking, i.e. any failed message will block the channel
 * this abstract class try-catch all fail messages and store locally for future retry. hence, non-blocking
 * NOTE: if the srcAddress is not configured properly, it will still block the message pathway from (srcChainId, srcAddress)
 */
abstract contract NonblockingLzApp is LzApp {
    using ExcessivelySafeCall for address;

    constructor(address _endpoint) LzApp(_endpoint) {}

    mapping(uint16 => mapping(bytes => mapping(uint64 => bytes32))) public failedMessages;

    event MessageFailed(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes _payload, bytes _reason);
    event RetryMessageSuccess(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes32 _payloadHash);

    // overriding the virtual function in LzReceiver
    function _blockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual override {
        (bool success, bytes memory reason) = address(this).excessivelySafeCall(gasleft(), 150, abi.encodeWithSelector(this.nonblockingLzReceive.selector, _srcChainId, _srcAddress, _nonce, _payload));
        // try-catch all errors/exceptions
        if (!success) {
            _storeFailedMessage(_srcChainId, _srcAddress, _nonce, _payload, reason);
        }
    }

    function _storeFailedMessage(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload, bytes memory _reason) internal virtual {
        failedMessages[_srcChainId][_srcAddress][_nonce] = keccak256(_payload);
        emit MessageFailed(_srcChainId, _srcAddress, _nonce, _payload, _reason);
    }

    function nonblockingLzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public virtual {
        // only internal transaction
        require(_msgSender() == address(this), "NonblockingLzApp: caller must be LzApp");
        _nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
    }

    //@notice override this function
    function _nonblockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual;

    function retryMessage(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public payable virtual {
        // assert there is message to retry
        bytes32 payloadHash = failedMessages[_srcChainId][_srcAddress][_nonce];
        require(payloadHash != bytes32(0), "NonblockingLzApp: no stored message");
        require(keccak256(_payload) == payloadHash, "NonblockingLzApp: invalid payload");
        // clear the stored message
        failedMessages[_srcChainId][_srcAddress][_nonce] = bytes32(0);
        // execute the message. revert if it fails again
        _nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
        emit RetryMessageSuccess(_srcChainId, _srcAddress, _nonce, payloadHash);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IONFT1155.sol";
import "./ONFT1155Core.sol";
import "@openzeppelin/contracts/token/ERC1155/ERC1155.sol";

// NOTE: this ONFT contract has no public minting logic.
// must implement your own minting logic in child classes
contract ONFT1155 is ONFT1155Core, ERC1155, IONFT1155 {
    constructor(string memory _uri, address _lzEndpoint) ERC1155(_uri) ONFT1155Core(_lzEndpoint) {}

    function supportsInterface(bytes4 interfaceId) public view virtual override(ONFT1155Core, ERC1155, IERC165) returns (bool) {
        return interfaceId == type(IONFT1155).interfaceId || super.supportsInterface(interfaceId);
    }

    function _debitFrom(address _from, uint16, bytes memory, uint[] memory _tokenIds, uint[] memory _amounts) internal virtual override {
        address spender = _msgSender();
        require(spender == _from || isApprovedForAll(_from, spender), "ONFT1155: send caller is not owner nor approved");
        _burnBatch(_from, _tokenIds, _amounts);
    }

    function _creditTo(uint16, address _toAddress, uint[] memory _tokenIds, uint[] memory _amounts) internal virtual override {
        _mintBatch(_toAddress, _tokenIds, _amounts, "");
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IONFT1155Core.sol";
import "../../lzApp/NonblockingLzApp.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";

abstract contract ONFT1155Core is NonblockingLzApp, ERC165, IONFT1155Core {
    uint public constant NO_EXTRA_GAS = 0;
    uint16 public constant FUNCTION_TYPE_SEND = 1;
    uint16 public constant FUNCTION_TYPE_SEND_BATCH = 2;
    bool public useCustomAdapterParams;

    event SetUseCustomAdapterParams(bool _useCustomAdapterParams);

    constructor(address _lzEndpoint) NonblockingLzApp(_lzEndpoint) {}

    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IONFT1155Core).interfaceId || super.supportsInterface(interfaceId);
    }

    function estimateSendFee(uint16 _dstChainId, bytes memory _toAddress, uint _tokenId, uint _amount, bool _useZro, bytes memory _adapterParams) public view virtual override returns (uint nativeFee, uint zroFee) {
        return estimateSendBatchFee(_dstChainId, _toAddress, _toSingletonArray(_tokenId), _toSingletonArray(_amount), _useZro, _adapterParams);
    }

    function estimateSendBatchFee(uint16 _dstChainId, bytes memory _toAddress, uint[] memory _tokenIds, uint[] memory _amounts, bool _useZro, bytes memory _adapterParams) public view virtual override returns (uint nativeFee, uint zroFee) {
        bytes memory payload = abi.encode(_toAddress, _tokenIds, _amounts);
        return lzEndpoint.estimateFees(_dstChainId, address(this), payload, _useZro, _adapterParams);
    }

    function sendFrom(address _from, uint16 _dstChainId, bytes memory _toAddress, uint _tokenId, uint _amount, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams) public payable virtual override {
        _sendBatch(_from, _dstChainId, _toAddress, _toSingletonArray(_tokenId), _toSingletonArray(_amount), _refundAddress, _zroPaymentAddress, _adapterParams);
    }

    function sendBatchFrom(address _from, uint16 _dstChainId, bytes memory _toAddress, uint[] memory _tokenIds, uint[] memory _amounts, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams) public payable virtual override {
        _sendBatch(_from, _dstChainId, _toAddress, _tokenIds, _amounts, _refundAddress, _zroPaymentAddress, _adapterParams);
    }

    function _sendBatch(address _from, uint16 _dstChainId, bytes memory _toAddress, uint[] memory _tokenIds, uint[] memory _amounts, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams) internal virtual {
        _debitFrom(_from, _dstChainId, _toAddress, _tokenIds, _amounts);
        bytes memory payload = abi.encode(_toAddress, _tokenIds, _amounts);
        if (_tokenIds.length == 1) {
            if (useCustomAdapterParams) {
                _checkGasLimit(_dstChainId, FUNCTION_TYPE_SEND, _adapterParams, NO_EXTRA_GAS);
            } else {
                require(_adapterParams.length == 0, "LzApp: _adapterParams must be empty.");
            }
            _lzSend(_dstChainId, payload, _refundAddress, _zroPaymentAddress, _adapterParams, msg.value);
            emit SendToChain(_dstChainId, _from, _toAddress, _tokenIds[0], _amounts[0]);
        } else if (_tokenIds.length > 1) {
            if (useCustomAdapterParams) {
                _checkGasLimit(_dstChainId, FUNCTION_TYPE_SEND_BATCH, _adapterParams, NO_EXTRA_GAS);
            } else {
                require(_adapterParams.length == 0, "LzApp: _adapterParams must be empty.");
            }
            _lzSend(_dstChainId, payload, _refundAddress, _zroPaymentAddress, _adapterParams, msg.value);
            emit SendBatchToChain(_dstChainId, _from, _toAddress, _tokenIds, _amounts);
        }
    }

    function _nonblockingLzReceive(
        uint16 _srcChainId,
        bytes memory _srcAddress,
        uint64, /*_nonce*/
        bytes memory _payload
    ) internal virtual override {
        // decode and load the toAddress
        (bytes memory toAddressBytes, uint[] memory tokenIds, uint[] memory amounts) = abi.decode(_payload, (bytes, uint[], uint[]));
        address toAddress;
        assembly {
            toAddress := mload(add(toAddressBytes, 20))
        }

        _creditTo(_srcChainId, toAddress, tokenIds, amounts);

        if (tokenIds.length == 1) {
            emit ReceiveFromChain(_srcChainId, _srcAddress, toAddress, tokenIds[0], amounts[0]);
        } else if (tokenIds.length > 1) {
            emit ReceiveBatchFromChain(_srcChainId, _srcAddress, toAddress, tokenIds, amounts);
        }
    }

    function setUseCustomAdapterParams(bool _useCustomAdapterParams) external onlyOwner {
        useCustomAdapterParams = _useCustomAdapterParams;
        emit SetUseCustomAdapterParams(_useCustomAdapterParams);
    }

    function _debitFrom(address _from, uint16 _dstChainId, bytes memory _toAddress, uint[] memory _tokenIds, uint[] memory _amounts) internal virtual;

    function _creditTo(uint16 _srcChainId, address _toAddress, uint[] memory _tokenIds, uint[] memory _amounts) internal virtual;

    function _toSingletonArray(uint element) internal pure returns (uint[] memory) {
        uint[] memory array = new uint[](1);
        array[0] = element;
        return array;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.17;

import { Context } from "@openzeppelin/contracts/utils/Context.sol";

import { ParallelAlphaInvoke } from "./ParallelAlphaInvoke.sol";
import { IForwarder } from "../metatx/IForwarder.sol";
import { ERC2771Recipient } from "../metatx/ERC2771Recipient.sol";

contract ParallelAlpha is ParallelAlphaInvoke {
    constructor(
        address _lzEndpoint,
        address _forwarder
    ) ParallelAlphaInvoke(_lzEndpoint, _forwarder) {}
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.17;

import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { ONFT1155, ONFT1155Core, IONFT1155Core } from "@layerzerolabs/solidity-examples/contracts/token/onft/ONFT1155.sol";
import { ERC1155, IERC1155, Context } from "@openzeppelin/contracts/token/ERC1155/ERC1155.sol";
import { ReentrancyGuard } from "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import { SafeERC20, IERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { Strings } from "@openzeppelin/contracts/utils/Strings.sol";
import { EIP712, ECDSA } from "@openzeppelin/contracts/utils/cryptography/EIP712.sol";
import { RevokableDefaultOperatorFilterer } from "operator-filter-registry/src/RevokableDefaultOperatorFilterer.sol";
import { UpdatableOperatorFilterer } from "operator-filter-registry/src/UpdatableOperatorFilterer.sol";

import { SpendGateway, InvokeSpendHandler } from "./libraries/ParallelAlphaLib.sol";
import { IParallelAlphaInvoke } from "./interfaces/IParallelAlphaInvoke.sol";
import { ERC2771Recipient } from "../metatx/ERC2771Recipient.sol";

contract ParallelAlphaInvoke is
    IParallelAlphaInvoke,
    ONFT1155,
    ReentrancyGuard,
    ERC2771Recipient,
    RevokableDefaultOperatorFilterer
{
    using SafeERC20 for IERC20;
    using Strings for uint256;

    /// @notice Address of prime contract.
    IERC20 public prime;
    /// @notice Batch size upper limit.
    uint256 public batchSizeLimit = 111;
    /// @notice A descriptive name for a collection of NFTs in this contract
    string public name;
    /// @notice An abbreviated name for NFTs in this contract
    string public symbol;
    /// @notice a record of all SpendGateways
    mapping(uint256 => SpendGateway) public spendGateways;

    /// @param _lzEndpoint Layer Zero endpoint
    constructor(
        address _lzEndpoint,
        address _forwarder
    )
        ONFT1155(
            "https://nftdata.parallelnft.com/api/tokens/parallel-alpha/ipfs/{id}",
            _lzEndpoint
        )
        ERC2771Recipient(_forwarder)
    {
        name = "parallel";
        symbol = "LL";
        prime = IERC20(0xb23d80f5FefcDDaa212212F028021B41DEd428CF);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner()
        public
        view
        override(Ownable, UpdatableOperatorFilterer)
        returns (address)
    {
        return super.owner();
    }

    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\{id\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(
        uint256 _tokenId
    ) public view virtual override returns (string memory) {
        string memory baseURI = super.uri(_tokenId);

        // Exit early if the baseURI is empty.
        if (bytes(baseURI).length == 0) {
            return "";
        }

        // Check if the last character in baseURI is a slash.
        if (bytes(baseURI)[bytes(baseURI).length - 1] != bytes("/")[0]) {
            return baseURI;
        }

        return string.concat(baseURI, _tokenId.toString());
    }

    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\{id\}` substring in either the
     * URI or any of the amounts in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\{id\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function setURI(string memory _uri) external onlyOwner {
        _setURI(_uri);
    }

    /**
     * @notice Updated trusted forwarder address.
     * @param _forwarder New trusted forwarder address.
     */
    function setTrustedForwarder(address _forwarder) external onlyOwner {
        _setTrustedForwarder(_forwarder);
        emit TrustedForwarderSet(_forwarder);
    }

    /**
     * @notice Updated prime contract address.
     * @param _prime New prime contract address.
     */
    function setPrime(address _prime) external onlyOwner {
        prime = IERC20(_prime);
        emit PrimeSet(_prime);
    }

    /**
     * @notice Updates batch size limit.
     * @param _batchSizeLimit New batch size limit.
     */
    function setBatchSizeLimit(uint256 _batchSizeLimit) external onlyOwner {
        batchSizeLimit = _batchSizeLimit;
        emit BatchSizeLimitSet(_batchSizeLimit);
    }

    /**
     * @notice Allow the caller to send Parallel Alpha to the Echelon Ecosystem of smart
     *         contracts. Parallel Alpha are collected to the destination address,
     *         handler is invoked to trigger downstream logic and events
     *
     * @param _id An id of the gateway
     * @param _tokenIds Token id of the Parallel Alpha that was sent
     * @param _amounts The amount of an Parallel Alpha that was sent to the
     *        invokeSpend function (and was collected to gateway handler)
     * @param _primeValue The amount of an prime that was sent to the
     *        invokeSpend function (and was collected to gateway handler)
     * @param _data Catch-all param to allow the caller to pass additional
     *        data to the handler
     */
    function invokeSpend(
        uint256 _id,
        uint256[] calldata _tokenIds,
        uint256[] calldata _amounts,
        uint256 _primeValue,
        bytes memory _data
    ) public payable nonReentrant {
        SpendGateway memory gateway = spendGateways[_id];

        if (gateway.nftDestinationAddress == address(0))
            revert ZeroAddress("nftDestinationAddress");

        // pull the native token to nativeDestinationAddress
        if (msg.value != 0) {
            (bool success, ) = payable(gateway.nativeDestinationAddress).call{
                value: msg.value
            }("");
            if (!success) revert TransferError();
        }

        // pull the prime to primeDestinationAddress
        if (_primeValue != 0) {
            prime.safeTransferFrom(
                _msgSender(),
                gateway.primeDestinationAddress,
                _primeValue
            );
        }
        // pull the Nfts to nftReceiverAddress
        if (_tokenIds.length != 0) {
            _safeBatchTransferFrom(
                _msgSender(),
                gateway.nftDestinationAddress,
                _tokenIds,
                _amounts,
                ""
            );
        }

        // invoke the handler function with all transaction data
        InvokeSpendHandler(gateway.invokeSpendHandler).handleInvokeSpend(
            _msgSender(),
            gateway.nftDestinationAddress,
            gateway.nativeDestinationAddress,
            gateway.primeDestinationAddress,
            _id,
            _tokenIds,
            _amounts,
            msg.value,
            _primeValue,
            _data
        );

        emit SpendInvoked(
            _msgSender(),
            gateway.nftDestinationAddress,
            gateway.nativeDestinationAddress,
            gateway.primeDestinationAddress,
            _id,
            _tokenIds,
            _amounts,
            msg.value,
            _primeValue,
            _data
        );
    }

    /**
     * @notice Allow an address with admin role to add a handler contract for invoke
     * @param _id - The id of the newly added handler contracts
     * @param _nftDestinationAddress - The address to which the Parallel Alpha are collected
     * @param _nativeDestinationAddress - The address to which Native token is collected
     * @param _primeDestinationAddress - The address to which prime is collected
     * @param _invokeSpendHandler - The address of the new invoke handler contract to be registered
     */
    function setGateway(
        uint256 _id,
        address _nftDestinationAddress,
        address _nativeDestinationAddress,
        address _primeDestinationAddress,
        address _invokeSpendHandler
    ) public onlyOwner {
        if (_nftDestinationAddress == address(0))
            revert ZeroAddress("_nftDestinationAddress");
        if (_nativeDestinationAddress == address(0))
            revert ZeroAddress("_nativeDestinationAddress");
        if (_primeDestinationAddress == address(0))
            revert ZeroAddress("_primeDestinationAddress");
        if (_invokeSpendHandler == address(0))
            revert ZeroAddress("_invokeSpendHandler");

        SpendGateway memory gateway;
        gateway.nftDestinationAddress = _nftDestinationAddress;
        gateway.nativeDestinationAddress = _nativeDestinationAddress;
        gateway.primeDestinationAddress = _primeDestinationAddress;
        gateway.invokeSpendHandler = InvokeSpendHandler(_invokeSpendHandler);

        spendGateways[_id] = gateway;

        emit SpendGatewayRegistered(
            _invokeSpendHandler,
            _nftDestinationAddress,
            _nativeDestinationAddress,
            _primeDestinationAddress
        );
    }

    function _debitFrom(
        address _from,
        uint16 _dstChainId,
        bytes memory _toAddress,
        uint[] memory _tokenIds,
        uint[] memory _amounts
    ) internal virtual override {
        if (_tokenIds.length > batchSizeLimit) {
            revert ExceedsBatchSizeLimit();
        }
        super._debitFrom(_from, _dstChainId, _toAddress, _tokenIds, _amounts);
    }

    /**
     *  @notice Overridden _msgSender to handle ERC2771
     */
    function _msgSender()
        internal
        view
        virtual
        override(Context, ERC2771Recipient)
        returns (address ret)
    {
        ret = ERC2771Recipient._msgSender();
    }

    /**
     *  @notice Overridden _msgData to handle ERC2771
     */
    function _msgData()
        internal
        view
        virtual
        override(Context, ERC2771Recipient)
        returns (bytes calldata)
    {
        return ERC2771Recipient._msgData();
    }

    /**
     * @dev See {IERC1155-setApprovalForAll}.
     *      In this example the added modifier ensures that the operator is allowed by the OperatorFilterRegistry.
     */
    function setApprovalForAll(
        address operator,
        bool approved
    ) public override(ERC1155, IERC1155) onlyAllowedOperatorApproval(operator) {
        super.setApprovalForAll(operator, approved);
    }

    /**
     * @dev See {IERC1155-safeTransferFrom}.
     *      In this example the added modifier ensures that the operator is allowed by the OperatorFilterRegistry.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        uint256 amount,
        bytes memory data
    ) public override(ERC1155, IERC1155) onlyAllowedOperator(from) {
        super.safeTransferFrom(from, to, tokenId, amount, data);
    }

    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     *      In this example the added modifier ensures that the operator is allowed by the OperatorFilterRegistry.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override(ERC1155, IERC1155) onlyAllowedOperator(from) {
        super.safeBatchTransferFrom(from, to, ids, amounts, data);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.17;

abstract contract InvokeSpendHandler {
    function handleInvokeSpend(
        address _from,
        address _nftDestinationAddress,
        address _nativeDestinationAddress,
        address _primeDestinationAddress,
        uint256 _id,
        uint256[] memory _tokenIds,
        uint256[] memory _amounts,
        uint256 _ethValue,
        uint256 _primeValue,
        bytes memory _data
    ) external virtual;
}

/**
 * @notice SpendGateway record stores the details of an InvokeSpendHandler contract
 */
struct SpendGateway {
    address nftDestinationAddress;
    address nativeDestinationAddress;
    address primeDestinationAddress;
    InvokeSpendHandler invokeSpendHandler;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {RevokableOperatorFilterer} from "./RevokableOperatorFilterer.sol";
import {CANONICAL_CORI_SUBSCRIPTION, CANONICAL_OPERATOR_FILTER_REGISTRY_ADDRESS} from "./lib/Constants.sol";
/**
 * @title  RevokableDefaultOperatorFilterer
 * @notice Inherits from RevokableOperatorFilterer and automatically subscribes to the default OpenSea subscription.
 *         Note that OpenSea will disable creator earnings enforcement if filtered operators begin fulfilling orders
 *         on-chain, eg, if the registry is revoked or bypassed.
 */

abstract contract RevokableDefaultOperatorFilterer is RevokableOperatorFilterer {
    /// @dev The constructor that is called when the contract is being deployed.
    constructor()
        RevokableOperatorFilterer(CANONICAL_OPERATOR_FILTER_REGISTRY_ADDRESS, CANONICAL_CORI_SUBSCRIPTION, true)
    {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {UpdatableOperatorFilterer} from "./UpdatableOperatorFilterer.sol";
import {IOperatorFilterRegistry} from "./IOperatorFilterRegistry.sol";

/**
 * @title  RevokableOperatorFilterer
 * @notice This contract is meant to allow contracts to permanently skip OperatorFilterRegistry checks if desired. The
 *         Registry itself has an "unregister" function, but if the contract is ownable, the owner can re-register at
 *         any point. As implemented, this abstract contract allows the contract owner to permanently skip the
 *         OperatorFilterRegistry checks by calling revokeOperatorFilterRegistry. Once done, the registry
 *         address cannot be further updated.
 *         Note that OpenSea will still disable creator earnings enforcement if filtered operators begin fulfilling orders
 *         on-chain, eg, if the registry is revoked or bypassed.
 */
abstract contract RevokableOperatorFilterer is UpdatableOperatorFilterer {
    /// @dev Emitted when the registry has already been revoked.
    error RegistryHasBeenRevoked();
    /// @dev Emitted when the initial registry address is attempted to be set to the zero address.
    error InitialRegistryAddressCannotBeZeroAddress();

    event OperatorFilterRegistryRevoked();

    bool public isOperatorFilterRegistryRevoked;

    /// @dev The constructor that is called when the contract is being deployed.
    constructor(address _registry, address subscriptionOrRegistrantToCopy, bool subscribe)
        UpdatableOperatorFilterer(_registry, subscriptionOrRegistrantToCopy, subscribe)
    {
        // don't allow creating a contract with a permanently revoked registry
        if (_registry == address(0)) {
            revert InitialRegistryAddressCannotBeZeroAddress();
        }
    }

    /**
     * @notice Update the address that the contract will make OperatorFilter checks against. When set to the zero
     *         address, checks will be permanently bypassed, and the address cannot be updated again. OnlyOwner.
     */
    function updateOperatorFilterRegistryAddress(address newRegistry) public override {
        if (msg.sender != owner()) {
            revert OnlyOwner();
        }
        // if registry has been revoked, do not allow further updates
        if (isOperatorFilterRegistryRevoked) {
            revert RegistryHasBeenRevoked();
        }

        operatorFilterRegistry = IOperatorFilterRegistry(newRegistry);
        emit OperatorFilterRegistryAddressUpdated(newRegistry);
    }

    /**
     * @notice Revoke the OperatorFilterRegistry address, permanently bypassing checks. OnlyOwner.
     */
    function revokeOperatorFilterRegistry() public {
        if (msg.sender != owner()) {
            revert OnlyOwner();
        }
        // if registry has been revoked, do not allow further updates
        if (isOperatorFilterRegistryRevoked) {
            revert RegistryHasBeenRevoked();
        }

        // set to zero address to bypass checks
        operatorFilterRegistry = IOperatorFilterRegistry(address(0));
        isOperatorFilterRegistryRevoked = true;
        emit OperatorFilterRegistryRevoked();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}